aboutsummaryrefslogtreecommitdiff
path: root/gdb/common/common-utils.h
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Rename common to gdbsupportTom Tromey1-181/+0
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-02-07Normalize include guards in gdbTom Tromey1-3/+3
While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-09-12Move 'is_regular_file' from common-utils.c to filestuff.cSergio Durigan Junior1-5/+0
There is no reason for 'is_regular_file' to be in common-utils.c; it belongs to 'filestuff.c'. This commit moves the function definition and its prototype to the appropriate files. The motivation behind this move is a failure that happens on certain cross-compilation environments when compiling the IPA library, due to the way gnulib probes the need for a 'stat' call replacement. Because configure checks when cross-compiling are more limited, gnulib decides that it needs to substitute the 'stat' calls its own 'rpl_stat'; however, the IPA library doesn't link with gnulib, which leads to an error when compiling 'common-utils.c': ... /opt/x86-core2--musl--bleeding-edge-2018.09-1/bin/i686-buildroot-linux-musl-g++ -shared -fPIC -Wl,--soname=libinproctrace.so -Wl,--no-undefined -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -I. -I. -I./../common -I./../regformats -I./.. -I./../../include -I./../gnulib/import -Ibuild-gnulib-gdbserver/import -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-narrowing -Wno-error=maybe-uninitialized -DGDBSERVER \ -Wl,--dynamic-list=./proc-service.list -o libinproctrace.so ax-ipa.o common-utils-ipa.o errors-ipa.o format-ipa.o print-utils-ipa.o regcache-ipa.o remote-utils-ipa.o rsp-low-ipa.o tdesc-ipa.o tracepoint-ipa.o utils-ipa.o vec-ipa.o linux-i386-ipa.o linux-x86-tdesc-ipa.o arch/i386-ipa.o -ldl -pthread /opt/x86-core2--musl--bleeding-edge-2018.09-1/lib/gcc/i686-buildroot-linux-musl/8.2.0/../../../../i686-buildroot-linux-musl/bin/ld: common-utils-ipa.o: in function `is_regular_file(char const*, int*)': common-utils.c:(.text+0x695): undefined reference to `rpl_stat' collect2: error: ld returned 1 exit status Makefile:413: recipe for target 'libinproctrace.so' failed make[1]: *** [libinproctrace.so] Error 1 ... More details can also be found at: https://sourceware.org/ml/gdb-patches/2018-09/msg00304.html The most simple fix for this problem is to move 'is_regular_file' to 'filestuff.c', which is not used by IPA. This ends up making the files more logically organized as well, since 'is_regular_file' is a file operation. No regressions found. gdb/ChangeLog: 2018-09-12 Sergio Durigan Junior <sergiodj@redhat.com> * common/common-utils.c: Don't include '<sys/stat.h>'. (is_regular_file): Move to... * common/filestuff.c (is_regular_file): ... here. * common/common-utils.h (is_regular_file): Move to... * common/filestuff.h (is_regular_file): ... here.
2018-05-04aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous onesJan Kratochvil1-0/+32
Some unaligned watchpoints were currently missed. On old kernels as specified in kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit) https://sourceware.org/bugzilla/show_bug.cgi?id=20207 after this patch some other unaligned watchpoints will get reported as false positives. With new kernels all the watchpoints should work exactly. There may be a regresion that it now less merges watchpoints so that with multiple overlapping watchpoints it may run out of the 4 hardware watchpoint registers. But as discussed in the original thread GDB needs some generic watchpoints merging framework to be used by all the target specific code. Even current FSF GDB code does not merge it perfectly. Also with the more precise watchpoints one can technically merge them less. And I do not think it matters too much to improve mergeability only for old kernels. Still even on new kernels some better merging logic would make sense. There remains one issue: kernel-4.15.14-300.fc27.armv7hl FAIL: gdb.base/watchpoint-unaligned.exp: continue FAIL: gdb.base/watchpoint-unaligned.exp: continue (gdb) continue Continuing. Unexpected error setting watchpoint: Invalid argument. (gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue But that looks as a kernel bug to me. (1) It is not a regression by this patch. (2) It is unrelated to this patch. gdb/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * NEWS: Mention Aarch64 watchpoint improvements. * aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed watchpoints and PR external/20207 watchpoints. * nat/aarch64-linux-hw-point.c (kernel_supports_any_contiguous_range): New. (aarch64_watchpoint_offset): New. (aarch64_watchpoint_length): Support PR external/20207 watchpoints. (aarch64_point_encode_ctrl_reg): New parameter offset, new asserts. (aarch64_point_is_aligned): Support PR external/20207 watchpoints. (aarch64_align_watchpoint): New parameters aligned_offset_p and next_addr_orig_p. Support PR external/20207 watchpoints. (aarch64_downgrade_regs): New. (aarch64_dr_state_insert_one_point): New parameters offset and addr_orig. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Update caller. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Support addr_orig and aligned_offset. (aarch64_linux_set_debug_regs): Remove const from state. Call aarch64_downgrade_regs. (aarch64_show_debug_reg_state): Print also dr_addr_orig_wp. * nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ... (DR_CONTROL_MASK): ... this. (struct aarch64_debug_reg_state): New field dr_addr_orig_wp. (unsigned int aarch64_watchpoint_offset): New prototype. (aarch64_linux_set_debug_regs): Remove const from state. * utils.c (align_up, align_down): Move to ... * common/common-utils.c (align_up, align_down): ... here. * utils.h (align_up, align_down): Move to ... * common/common-utils.h (align_up, align_down): ... here. gdb/gdbserver/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_stopped_data_address): Likewise. gdb/testsuite/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * gdb.base/watchpoint-unaligned.c: New file. * gdb.base/watchpoint-unaligned.exp: New file.
2018-02-28Make gdbserver work with filename-only binariesSergio Durigan Junior1-0/+5
Simon mentioned on IRC that, after the startup-with-shell feature has been implemented on gdbserver, it is not possible to specify a filename-only binary, like: $ gdbserver :1234 a.out /bin/bash: line 0: exec: a.out: not found During startup program exited with code 127. Exiting This happens on systems where the current directory "." is not listed in the PATH environment variable. Although including "." in the PATH variable is a possible workaround, this can be considered a regression because before startup-with-shell it was possible to use only the filename (due to reason that gdbserver used "exec*" directly). The idea of the patch is to verify if the program path provided by the user (or by the remote protocol) contains a directory separator character. If it doesn't, it means we're dealing with a filename-only binary, so we call "gdb_abspath" to properly expand it and transform it into a full path. Otherwise, we leave the program path untouched. This mimicks the behaviour seen on GDB (look at "openp" and "attach_inferior", for example). I am also submitting a testcase which exercises the scenario described above. This test requires gdbserver to be executed in a different CWD than the original, so I also created a helper function, "with_cwd" (on testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the specified dir. Built and regtested on BuildBot, without regressions. gdb/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simon.marchi@polymtl.ca> * common/common-utils.c: Include "sys/stat.h". (is_regular_file): Move here from "source.c"; change return type to "bool". * common/common-utils.h (is_regular_file): New prototype. * common/pathstuff.c (contains_dir_separator): New function. * common/pathstuff.h (contains_dir_separator): New prototype. * source.c: Don't include "sys/stat.h". (is_regular_file): Move to "common/common-utils.c". gdb/gdbserver/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include "filenames.h" and "pathstuff.h". (program_name): Delete variable. (program_path): New anonymous class. (get_exec_wrapper): Use "program_path" instead of "program_name". (handle_v_run): Likewise. (captured_main): Likewise. (process_serial_event): Likewise. gdb/testsuite/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.server/abspath.exp: New file. * lib/gdb.exp (with_cwd): New procedure.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-11-24Poison XNEW and friends for types that should use new/deleteSimon Marchi1-1/+13
This patch (finally!) makes it so that trying to use XNEW with a type that requires "new" will cause a compilation error. The criterion I initially used to allow a type to use XNEW (which calls malloc in the end) was std::is_trivially_constructible, but then realized that gcc 4.8 did not have it. Instead, I went with: using IsMallocatable = std::is_pod<T>; which is just a bit more strict, which doesn't hurt. A similar thing is done for macros that free instead of allocated, the criterion is: using IsFreeable = gdb::Or<std::is_trivially_destructible<T>, std::is_void<T>>; Trying to use XNEW on a type that requires new will result in an error like this: In file included from /home/simark/src/binutils-gdb/gdb/common/common-utils.h:26:0, from /home/simark/src/binutils-gdb/gdb/common/common-defs.h:78, from /home/simark/src/binutils-gdb/gdb/defs.h:28, from /home/simark/src/binutils-gdb/gdb/lala.c:1: /home/simark/src/binutils-gdb/gdb/common/poison.h: In instantiation of ‘T* xnew() [with T = bar]’: /home/simark/src/binutils-gdb/gdb/lala.c:13:3: required from here /home/simark/src/binutils-gdb/gdb/common/poison.h:103:3: error: static assertion failed: Trying to use XNEW with a non-POD data type. Use operator new instead. static_assert (IsMallocatable<T>::value, "Trying to use XNEW with a non-POD\ ^~~~~~~~~~~~~ Generated-code-wise, it adds one more function call (xnew<T>) when using XNEW and building with -O0, but it all goes away with optimizations enabled. gdb/ChangeLog: * common/common-utils.h: Include poison.h. (xfree): Remove declaration, add definition with static_assert. * common/common-utils.c (xfree): Remove. * common/poison.h (IsMallocatable): Define. (IsFreeable): Define. (free): Delete for non-freeable types. (xnew): New. (XNEW): Undef and redefine. (xcnew): New. (XCNEW): Undef and redefine. (xdelete): New. (XDELETE): Undef and redefine. (xnewvec): New. (XNEWVEC): Undef and redefine. (xcnewvec): New. (XCNEWVEC): Undef and redefine. (xresizevec): New. (XRESIZEVEC): Undef and redefine. (xdeletevec): New. (XDELETEVEC): Undef and redefine. (xnewvar): New. (XNEWVAR): Undef and redefine. (xcnewvar): New. (XCNEWVAR): Undef and redefine. (xresizevar): New. (XRESIZEVAR): Undef and redefine.
2017-10-30Introduce in_inclusive_range, fix -Wtautological-compare warningsSimon Marchi1-0/+9
When compiling with clang or gcc 8, we see warnings like this: /home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:10013:13: error: comparison of 0 <= unsigned expression is always true [-Werror,-Wtautological-compare] if (0 <= insn_op1 && 3 >= insn_op1) ~ ^ ~~~~~~~~ /home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:11722:20: error: comparison of unsigned expression >= 0 is always true [-Werror,-Wtautological-compare] else if (opB >= 0 && opB <= 2) ~~~ ^ ~ This is because an unsigned integer (opB in this case) will always be >= 0. It is still useful to keep both bounds of the range in the expression, even if one is at the edge of the data type range. This patch introduces a utility function in_inclusive_range that gets rid of the warning while conveying that we are checking for a range. Tested by rebuilding. gdb/ChangeLog: * common/common-utils.h (in_inclusive_range): New function. * arm-tdep.c (arm_record_extension_space): Use in_inclusive_range. (thumb_record_ld_st_reg_offset): Use in_inclusive_range. * cris-tdep.c (cris_spec_reg_applicable): Use in_inclusive_range.
2017-10-30Introduce string_appendf/string_vappendfPedro Alves1-0/+9
string_appendf is like string_printf, but instead of allocating a new string, it appends to an existing string. This allows reusing a std::string's memory buffer across several calls, for example. gdb/ChangeLog: 2017-10-30 Pedro Alves <palves@redhat.com> * common/common-utils.c (string_appendf, string_vappendf): New functions. * common/common-utils.h (string_appendf, string_vappendf): New declarations. * unittests/common-utils-selftests.c (string_appendf_func) (test_appendf_func, string_vappendf_wrapper, string_appendf_tests) (string_vappendf_tests): New functions. (_initialize_common_utils_selftests): Register "string_appendf" and "string_vappendf tests".
2017-09-29Introduce string_vprintfTom Tromey1-0/+4
This adds string_vprintf, a va_list variant of string_printf. This will be used in later patches. gdb/ChangeLog 2017-09-29 Tom Tromey <tom@tromey.com> * unittests/common-utils-selftests.c (format): New function. (string_vprintf_tests): New function. (_initialize_common_utils_selftests): Register new tests. * common/common-utils.c (string_vprintf): New function. * common/common-utils.h (string_vprintf): Declare.
2017-09-11Rename _const functions to use overloading insteadTom Tromey1-3/+3
This renames a few functions -- skip_spaces_const, skip_to_space_const, get_number_const, extract_arg_const -- to drop the "_const" suffix and instead rely on overloading. This makes future const fixes simpler by reducing the number of lines that must be changed. I think it is also not any less clear, as all these functions have the same interface as their non-const versions by design. Furthermore there's an example of using an overload in-tree already, namely check_for_argument. This patch was largely created using some perl one-liners; then a few fixes were applied by hand. ChangeLog 2017-09-11 Tom Tromey <tom@tromey.com> * common/common-utils.h (skip_to_space): Remove macro, redeclare as function. (skip_to_space): Rename from skip_to_space_const. * common/common-utils.c (skip_to_space): New function. (skip_to_space): Rename from skip_to_space_const. * cli/cli-utils.h (get_number): Rename from get_number_const. (extract_arg): Rename from extract_arg_const. * cli/cli-utils.c (get_number): Rename from get_number_const. (extract_arg): Rename from extract_arg_const. (number_or_range_parser::get_number): Use ::get_number. * aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c, break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c, cli/cli-script.c, cli/cli-setshow.c, compile/compile.c, completer.c, demangle.c, disasm.c, findcmd.c, linespec.c, linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c, minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c, python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c, stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
2017-06-07Share fork_inferior et al with gdbserverSergio Durigan Junior1-0/+4
This is the most important (and the biggest, sorry) patch of the series. It moves fork_inferior from gdb/fork-child.c to nat/fork-inferior.c and makes all the necessary adjustments to both GDB and gdbserver to make sure everything works OK. There is no "most important change" with this patch; all changes are made in a progressive way, making sure that gdbserver had the necessary features while not breaking GDB at the same time. I decided to go ahead and implement a partial support for starting the inferior with a shell on gdbserver, although the full feature comes in the next patch. The user won't have the option to disable the startup-with-shell, and also won't be able to change which shell gdbserver will use (other than setting the $SHELL environment variable, that is). Everything is working as expected, and no regressions were present during the tests. gdb/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> Pedro Alves <palves@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h" and "nat/fork-inferior.h". * common/common-inferior.h: New file, with contents from "gdb/inferior.h". * commom/common-utils.c: Include "common-utils.h". (stringify_argv): New function. * common/common-utils.h (stringify_argv): New prototype. * configure.nat: Add "fork-inferior.o" as a dependency for "*linux*", "fbsd*" and "nbsd*" hosts. * corefile.c (get_exec_file): Update comment. * darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior" instead of "startup_inferior". (darwin_create_inferior): Call "add_thread_silent" after "fork_inferior". * fork-child.c: Cleanup unnecessary includes. (SHELL_FILE): Move to "common/common-fork-child.c". (environ): Likewise. (exec_wrapper): Initialize. (get_exec_wrapper): New function. (breakup_args): Move to "common/common-fork-child.c"; rename to "breakup_args_for_exec". (escape_bang_in_quoted_argument): Move to "common/common-fork-child.c". (saved_ui): New variable. (prefork_hook): New function. (postfork_hook): Likewise. (postfork_child_hook): Likewise. (gdb_startup_inferior): Likewise. (fork_inferior): Move to "common/common-fork-child.c". Update function to support gdbserver. (startup_inferior): Likewise. * gdbcore.h (get_exec_file): Remove declaration. * gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h". (inf_ptrace_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inferior.h: Include "common-inferior.h". (trace_start_error): Move to "common/common-utils.h". (trace_start_error_with_name): Likewise. (fork_inferior): Move prototype to "nat/fork-inferior.h". (startup_inferior): Likewise. (gdb_startup_inferior): New prototype. * nat/fork-inferior.c: New file, with contents from "fork-child.c". * nat/fork-inferior.h: New file. * procfs.c (procfs_init_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * target.h (target_terminal_init): Move prototype to "target/target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * target/target.h (target_terminal_init): New prototype, moved from "target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * utils.c (gdb_flush_out_err): New function. gdb/gdbserver/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> Pedro Alves <palves@redhat.com> * Makefile.in (SFILES): Add "nat/fork-inferior.o". * configure: Regenerate. * configure.srv (srv_linux_obj): Add "fork-child.o" and "fork-inferior.o". (i[34567]86-*-lynxos*): Likewise. (spu*-*-*): Likewise. * fork-child.c: New file. * linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h" and "environ.h". (linux_ptrace_fun): New function. (linux_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". (linux_request_interrupt): Delete "signal_pid". * lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h". (lynx_ptrace_fun): New function. (lynx_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". * nto-low.c (nto_create_inferior): Adjust function prototype and code to reflect change on "target.h". Update comments. * server.c: Include "common-inferior.h", "nat/fork-inferior.h", "common-terminal.h" and "environ.h". (terminal_fd): Moved to fork-child.c. (old_foreground_pgrp): Likewise. (restore_old_foreground_pgrp): Likewise. (last_status): Make it global. (last_ptid): Likewise. (our_environ): New variable. (startup_with_shell): Likewise. (program_name): Likewise. (program_argv): Rename to... (program_args): ...this. (wrapper_argv): New variable. (start_inferior): Delete function. (get_exec_wrapper): New function. (get_exec_file): Likewise. (get_environ): Likewise. (prefork_hook): Likewise. (post_fork_inferior): Likewise. (postfork_hook): Likewise. (postfork_child_hook): Likewise. (handle_v_run): Update code to deal with arguments coming from the remote host. Update calls from "start_inferior" to "create_inferior". (captured_main): Likewise. Initialize environment variable. Call "have_job_control". * server.h (post_fork_inferior): New prototype. (get_environ): Likewise. (last_status): Declare. (last_ptid): Likewise. (signal_pid): Likewise. * spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h". (spu_ptrace_fun): New function. (spu_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". * target.c (target_terminal_init): New function. (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * target.h: Include <vector>. (struct target_ops) <create_inferior>: Update prototype. (create_inferior): Update macro. * utils.c (gdb_flush_out_err): New function. * win32-low.c (win32_create_inferior): Adjust function prototype and code to reflect change on "target.h". gdb/testsuite/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.server/non-existing-program.exp: Update regex in order to reflect the fact that gdbserver is now using fork_inferior (with a shell) to startup the inferior.
2017-04-12C++-fy and prepare for sharing fork_inferiorSergio Durigan Junior1-0/+5
As a preparation for the next patch, which will move fork_inferior from GDB to common/ (and therefore share it with gdbserver), it is interesting to convert a few functions to C++. This patch touches functions related to parsing command-line arguments to the inferior (see gdb/fork-child.c:breakup_args), the way the arguments are stored on fork_inferior (using std::vector instead of char **), and the code responsible for dealing with argv also on gdbserver. I've taken this opportunity and decided to constify a few arguments to fork_inferior/create_inferior as well, in order to make the code cleaner. And now, on gdbserver, we're using xstrdup everywhere and aren't checking for memory allocation failures anymore, as requested by Pedro: <https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html> Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com> Pedro Alves wrote: > On the "== NULL" check: IIUC, the old NULL check was there to > handle strdup returning NULL due to out-of-memory. > See NULL checks and comments further above in this function. > Now that you're using a std::vector, that doesn't work or make > sense any longer, since if push_back fails to allocate space for > its internal buffer (with operator new), our operator new replacement > (common/new-op.c) calls malloc_failure, which aborts gdbserver. > > Not sure it makes sense to handle out-of-memory specially in > the gdb/rsp-facing functions nowadays (maybe git blame/log/patch > submission for that code shows some guidelines). Maybe (or, probably) > it's OK to stop caring about it, but then we should consistently remove > left over code, by using xstrdup instead and remove the NULL checks. IMO this refactoring was very good to increase the readability of the code as well, because some parts of the argument handling were unnecessarily confusing before. gdb/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> * common/common-utils.c (free_vector_argv): New function. * common/common-utils.h: Include <vector>. (free_vector_argv): New prototype. * darwin-nat.c (darwin_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * fork-child.c: Include <vector>. (breakup_args): Rewrite function, using C++. (fork_inferior): Rewrite function header, constify "exec_file_arg" and accept "std::string" for "allargs". Update the code to calculate "argv" based on "allargs". Update calls to "exec_fun" and "execvp". * gnu-nat.c (gnu_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * go32-nat.c (go32_create_inferior): Likewise. * inf-ptrace.c (inf_ptrace_create_inferior): Likewise. * infcmd.c (run_command_1): Constify "exec_file". Use "std::string" for inferior arguments. * inferior.h (fork_inferior): Update prototype. * linux-nat.c (linux_nat_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * nto-procfs.c (procfs_create_inferior): Likewise. * procfs.c (procfs_create_inferior): Likewise. * remote-sim.c (gdbsim_create_inferior): Likewise. * remote.c (extended_remote_run): Update code to accept "std::string" as argument. (extended_remote_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * rs6000-nat.c (super_create_inferior): Likewise. (rs6000_create_inferior): Likewise. * target.h (struct target_ops) <to_create_inferior>: Likewise. * windows-nat.c (windows_create_inferior): Likewise. gdb/gdbserver/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include <vector>. <program_argv, wrapper_argv>: Convert to std::vector. (start_inferior): Rewrite function to use C++. (handle_v_run): Likewise. Update code that calculates the argv based on the vRun packet; use C++. (captured_main): Likewise.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-11-08Introduce string_printfPedro Alves1-0/+6
This introduces the string_printf function. Like asprintf, but returns a std::string. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add utils-selftests.o. * common/common-utils.c (string_printf): New function. * common/common-utils.h: Include <string>. (string_printf): Declare. * utils-selftests.c: New file.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-06-15Move utility functions to common/Jan Kratochvil1-0/+20
gdb/ChangeLog 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Move utility functions to common/. * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const): Move defs to common/common-utils.c. * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space) (skip_to_space_const): Move decls to common/common-utils.h. * common/common-defs.h: Move include of common-types.h before common-utils.h. * common/common-utils.c: Include host-defs.h and ctype.h. (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move from utils.c. (skip_spaces, skip_spaces_const, skip_to_space_const): Move from cli/cli-utils.c. * common/common-utils.h (strtoulst): Move decl from utils.h. (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const): Move from cli/cli-utils.h. * common/host-defs.h: Include limits.h. (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h. (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h. * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to common/common-utils.h. * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int) (strtoulst): Move to common/common-utils.c. * utils.h (strtoulst): Moved decl to common/common-utils.h.
2015-03-06New common function "startswith"Gary Benson1-0/+9
This commit introduces a new inline common function "startswith" which takes two string arguments and returns nonzero if the first string starts with the second. It also updates the 295 places where this logic was written out longhand to use the new function. gdb/ChangeLog: * common/common-utils.h (startswith): New inline function. All places where this logic was used updated to use the above.
2015-01-15Move safe_strerror to common/Sergio Durigan Junior1-0/+6
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files to the respective common/{posix,mingw}-strerror.c files. This is a preparation for the next patch, which shares a common code (to disable address space randomization when creating a new inferior). The patch has been regtested on Fedora 20 x86_64, and no regressions were found. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and common/posix-strerror.c. (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * common/common-utils.h (safe_strerror): Move prototype to here, from utils.h. * common/common.host: New file. * common/mingw-strerror.c: Likewise. * common/posix-strerror.c: Likewise. * configure: Regenerated. * configure.ac: Source common/common.host. Add variable common_host_obs to gdb_host_obs. * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and gdb/common/posix-strerror.c when warning about the use of strerror. * mingw-hdep.c (safe_strerror): Remove definition; move it to common/mingw-strerror.c. * posix-hdep.c (safe_strerror): Remove definition; move it to common/posix-hdep.c. * utils.h (safe_strerror): Remove prototype; move to common/common-utils.h. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * configure: Regenerated. * configure.ac: Source file ../common/common.host. Initialize new variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-08-19Introduce common/errors.hGary Benson1-4/+0
This introduces common/errors.h. This holds some error- and warning- related declarations that can be used by the code in common, nat and target. Some of the declared functions must be provided by the client as documented by the header file comments. gdb/ChangeLog: * common/errors.h: New file. * common/errors.c: Likewise. * Makefile.in (SFILES): Add common/errors.c. (HFILES_NO_SRCDIR): Add common/errors.h. (COMMON_OBS): Add errors.o. (errors.o): New rule. * common/common-defs.h: Include errors.h. * utils.h (perror_with_name, error, verror, warning, vwarning): Don't declare. * common/common-utils.h: (malloc_failure, internal_error): Likewise. gdb/gdbserver/ChangeLog: * Makefile.in (SFILES): Add common/errors.c. (OBS): Add errors.o. (IPA_OBS): Add errors-ipa.o. (errors.o): New rule. (errors-ipa.o): Likewise. * utils.h (perror_with_name, error, warning): Don't declare. * utils.c (warning): Renamed and rewritten as... (vwarning): New function. (error): Renamed and rewritten as... (verror): New function. (internal_error): Renamed and rewritten as... (internal_verror): New function.
2014-08-07Move ansidecl.h to common-defs.hGary Benson1-2/+0
This commit moves the inclusion of ansidecl.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include ansidecl.h. * defs.h: Do not include ansidecl.h. * common/buffer.h: Likewise. * common/common-utils.h: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include ansidecl.h.
2014-08-07Move stddef.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stddef.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stddef.h. * defs.h: Do not include stddef.h. * common/common-utils.h: Likewise. * amd64fbsd-nat.c: Likewise. * bcache.c: Likewise. * charset.c: Likewise. * common/buffer.h: Likewise. * common/vec.h: Likewise. * i386bsd-nat.c: Likewise. * nat/linux-btrace.h: Likewise. * ppcfbsd-nat.c: Likewise. * ppcnbsd-tdep.h: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.h: Likewise. * python/py-gdb-readline.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * linux-x86-low.c: Do not include stddef.h. * lynx-ppc-low.c: Likewise. * tracepoint.c: Likewise.
2014-08-07Move stdarg.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stdarg.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdarg.h. * defs.h: Do not include stdarg.h. * ada-lang.c: Likewise. * common/common-utils.h: Likewise. * guile/scm-string.c: Likewise. * guile/scm-utils.c: Likewise. * m32c-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdarg.h. * nto-low.c: Likewise.
2014-07-30Do not include config.h directlyGary Benson1-1/+0
All source files under gdb/ that include headers from gdb/ include either defs.h or server.h before any other code with the exception of gdb/gdbserver/gdbreplay.c which seems to be a special case. Both defs.h and server.h include both our and gnulib's config.h files as their first non-comment line, so no other file ever needs to directly include any config.h. This commit removes two such direct config.h includes. gdb/ 2014-07-30 Gary Benson <gbenson@redhat.com> * common/common-utils.h: Do not include config.h. * nat/linux-btrace.h: Likewise.
2014-01-22Add ARI (ok) marker for __func__ reference in common-utils.hJoel Brobecker1-1/+1
The ARI script flagged the use of the __func__ variable, which is normally not allowed (not defined in C90). However, this particular use is OK, as the reference is only made when __STDC_VERSION__ >= 199901L. So, add an "ARI:" comment to explicitly OK this use. gdb/ChangeLog: * common/common-utils.h: Add "ARI:" comment beside __func__ reference.
2014-01-22Expand documentation of common-utils.h::FUNCTION_NAMEJoel Brobecker1-1/+6
While looking at this macro, I noticed that it wasn't always necessarily defined. That prompted me to search the current sources to make sure that all uses were adequately protected, which they were. But to help prevent future uses to be made unprotected, this patch expands the current macro documentation a bit. gdb/ChangeLog: * common/common-utils.h (FUNCTION_NAME): Expand the macro's documentation a bit.
2014-01-17Move ASSERT_FUNCTION to FUNCTION_NAME.Doug Evans1-0/+13
* common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION, and moved here ... * common/gdb_assert.h (ASSERT_FUNCTION): ... from here. #include "common-utils.h". (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update. * common/vec.h (VEC_ASSERT_PASS): Update. * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h. (MACH_CHECK_ERROR): Update.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-02-14Move savestring to common/common-utils.c, make gdbserver use it.Pedro Alves1-0/+6
This makes gdbserver share gdb's savestring, instead of baking its own. Tested on x86_64 Fedora 17. gdb/ 2013-02-14 Pedro Alves <palves@redhat.com> * utils.c (savestring): Don't #undef it. Move function to common/common-utils.c. * common/common-utils.c: Include gdb_string.h. (savestring): Move here from utils.c. * common/common-utils.h (savestring): Declare. gdb/gdbserver/ 2013-02-14 Pedro Alves <palves@redhat.com> * tracepoint.c (save_string): Delete. (add_tracepoint_action): Use savestring instead of save_string.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-11-29 * contrib/ari/gdb_ari.sh: Remove rules for xasprintf andTom Tromey1-7/+0
xvasprintf. * common/common-utils.c (xasprintf, xvasprintf): Remove. * common/common-utils.h (xasprintf, xvasprintf): Remove.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-3/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-07-212011-07-22 Kwok Cheung Yeung <kcy@codesourcery.com>Kwok Yeung1-0/+59
gdb/ * defs.h: Add guard against inclusion in gdbserver. (struct ptid, ptid_t): Move to common/ptid.h. (xfree, xzalloc, xasprintf, xvasprintf, xstrprintf, xstrvprintf, xsnprintf, internal_error): Move to common/common-utils.h. (nomem): Delete. * gdb_assert.h: Move into common/ sub-directory. * gdb_locale.h: Ditto. * gdb_dirent.h: Ditto. * inferior.h (minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.h. * xml-support.c (xml_escape_text): Move into common/xml-utils.c. (gdb_xml_create_parser_and_cleanup_1, xml_fetch_context_from_file): Change nomem to malloc_failure. * xml-support.h (xml_escape_text): Move into common/xml-utils.h. * utils.c (nomem): Rename to malloc_failure. (xmalloc, xzalloc, xrealloc, xcalloc, xfree, xstrprintf, xasprintf, xvasprintf, xstrvprintf, xsnprintf): Move to common/common-utils.c. (gdb_buildargv): Change nomem to malloc_failure. * infrun.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.c. (initialize_infrun): Delete initialization of null_ptid and minus_one_ptid. * linux-nat.c (linux_nat_xfer_osdata): Defer to linux_common_xfer_osdata. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/ptid.c and common/buffer.c. (HFILES_NO_SRCDIR): Add common/common-utils.h, common/xml-utils.h, common/ptid.h, common/buffer.h and common/linux-osdata.h. (COMMON_OBS): Add xml-utils.o, common-utils.o, buffer.o and ptid.o. (common-utils.o, xml-utils.o, ptid.o, buffer.o, linux-osdata.o): New rules. * common/gdb_assert.h: New. * common/gdb_dirent.h: New. * common/gdb_locale.h: New. * common/buffer.c: New. * common/buffer.h: New. * common/ptid.c: New. * common/ptid.h: New. * common/xml-utils.c: New. * common/xml-utils.h: New. * common/common-utils.c: New. * common/common-utils.h: New. * common/linux-osdata.c: New. * common/linux-osdata.h: New. * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-osdata.o. * config/arm/linux.mh (NATDEPFILES): Ditto. * config/i386/linux.mh (NATDEPFILES): Ditto. * config/i386/linux64.mh (NATDEPFILES): Ditto. * config/ia64/linux.mh (NATDEPFILES): Ditto. * config/m32r/linux.mh (NATDEPFILES): Ditto. * config/m68k/linux.mh (NATDEPFILES): Ditto. * config/mips/linux.mh (NATDEPFILES): Ditto. * config/pa/linux.mh (NATDEPFILES): Ditto. * config/powerpc/linux.mh (NATDEPFILES): Ditto. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto. * config/s390/s390.mh (NATDEPFILES): Ditto. * config/sparc/linux.mh (NATDEPFILES): Ditto. * config/sparc/linux64.mh (NATDEPFILES): Ditto. * config/xtensa/linux.mh (NATDEPFILES): Ditto. gdbserver/ * linux-low.c (compare_ints, unique, list_threads, show_process, linux_core_of_thread): Delete. (linux_target_ops): Change linux_core_of_thread to linux_common_core_of_thread. (linux_qxfer_osdata): Defer to linux_common_xfer_osdata. * utils.c (malloc_failure): Change type of argument. (xmalloc, xrealloc, xcalloc, xsnprintf): Delete. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/linux-osdata.c, common/ptid.c and common/buffer.c. (OBS): Add xml-utils.o, common-utils.o, ptid.o and buffer.o. (IPA_OBJS): Add common-utils-ipa.o. (ptid_h, linux_osdata_h): New macros. (server_h): Add common/common-utils.h, common/xml-utils.h, common/buffer.h, common/gdb_assert.h, common/gdb_locale.h and common/ptid.h. (common-utils-ipa.o, common-utils.o, xml-utils.o, linux-osdata.o, ptid.o, buffer.o): New rules. (linux-low.o): Add common/linux-osdata.h as a dependency. * configure.srv (srv_tgtobj): Add linux-osdata.o to Linux targets. * configure.ac: Add AC_HEADER_DIRENT check. * config.in: Regenerate. * configure: Regenerate. * remote-utils.c (xml_escape_text): Delete. (buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf): Move to common/buffer.c. * server.c (main): Remove call to initialize_inferiors. * server.h (struct ptid, ptid_t, minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors, xml_escape_text, internal_error, gdb_assert, gdb_assert_fail): Delete. (struct buffer, buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf, buffer_grow_str, buffer_grow_str0): Move to common/buffer.h. * inferiors.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors): Delete.
generated by cgit v1.1 at 2024-11-11 12:32:15 +0000