riscv-gnu-toolchain/binutils.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author	Files	Lines
2016-07-01	Consolidate x86 debug register code for BSD native targets.	John Baldwin	1	-38/+0
	Move the debug register support code from amd64bsd-nat.c and i386bsd-nat.c into a shared x86bsd-nat.c. Instead of setting up x86_dr_low in amd64fbsd-nat.c and i386fbsd-nat.c, add a x86bsd_target function that creates a new target that inherits from inf_ptrace and sets up x86 debug registers if supported. In addition to initializing x86_dr_low, the x86bsd target installs a custom mourn_inferior target operation to clean up the x86 debug register state. Previously this was only done on amd64. Now it will be done for both i386 and amd64. The i386bsd_target and amd64bsd_target functions create targets that inherit from x86bsd rather than inf_ptrace. gdb/ChangeLog: * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with 'x86bsd-nat.h'. * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c. (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (amd64bsd_store_inferior_registers): Likewise. (amd64bsd_target): Inherit from x86bsd_target. (amd64bsd_dr_get): Rename and move to x86bsd-nat.c. (amd64bsd_dr_set): Likewise. (amd64bsd_dr_set_control): Likewise. (amd64bsd_dr_set_addr): Likewise. (amd64bsd_dr_get_addr): Likewise. (amd64bsd_dr_get_status): Likewise. (amd64bsd_dr_get_control): Likewise. * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (super_mourn_inferior): Move to x86bsd-nat.c. (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c. (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o. * config/i386/fbsd64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * i386bsd-nat.c: Include 'x86bsd-nat.h'. (i386bsd_xsave_len): Rename and move to x86bsd-nat.c. (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (i386bsd_store_inferior_registers): Likewise. (i386bsd_target): Inherit from x86bsd_target. (i386bsd_dr_get): Rename and move to x86bsd-nat.c. (i386bsd_dr_set): Likewise. (i386bsd_dr_set_control): Likewise. (i386bsd_dr_set_addr): Likewise. (i386bsd_dr_get_addr): Likewise. (i386bsd_dr_get_status): Likewise. (i386bsd_dr_get_control): Likewise. * i386bsd-nat.h (i386bsd_xsave_len): Remove. (i386bsd_dr_set_control): Remove. (i386bsd_dr_set_addr): Remove. (i386bsd_dr_get_addr): Remove. (i386bsd_dr_get_status): Remove. (i386bsd_dr_get_control): Remove. * i386fbsd-nat.c: Include 'x86bsd-nat.h'. (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * x86bsd-nat.c: New file. * x86bsd-nat.h: New file.
2016-01-01	GDB copyright headers update after running GDB's copyright.py script.	Joel Brobecker	1	-1/+1
	gdb/ChangeLog: Update year range in copyright notice of all files.
2015-04-13	Add support for the x86 XSAVE extended state on FreeBSD/x86.	John Baldwin	1	-0/+3
	Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent FreeBSD versions include a note containing the XSAVE state for each thread in the process when XSAVE is in use. The note stores a copy of the current XSAVE mask in a reserved section of the machine-defined XSAVE state at the same offset as Linux's NT_X86_XSTATE note. For native processes, use the PT_GETXSTATE_INFO ptrace request to determine if XSAVE is enabled, and if so the active XSAVE state mask (that is, the value of %xcr0 for the target process) as well as the size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests to fetch and store the XSAVE state, respectively, in the BSD x86 native targets. In addition, the FreeBSD amd64 and i386 native targets now include "read_description" target methods to determine the correct x86 target description for the current XSAVE mask. On FreeBSD amd64 this also properly returns an i386 target description for 32-bit binaries which allows the 64-bit GDB to run 32-bit binaries. Note that the ptrace changes are in the BSD native targets, not the FreeBSD-specific native targets since that is where the other ptrace register accesses occur. Of the other BSDs, NetBSD and DragonFly use XSAVE in the kernel but do not currently export the extended state via ptrace(2). OpenBSD does not currently support XSAVE. bfd/ChangeLog: * elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on FreeBSD. (elfcore_write_xstatereg): Use correct note name on FreeBSD. gdb/ChangeLog: * amd64-tdep.c (amd64_target_description): New function. * amd64-tdep.h: Export amd64_target_description and tdesc_amd64. * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len. (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle x86 extended save area. (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise. * amd64bsd-nat.h: Export amd64bsd_xsave_len. * amd64fbsd-nat.c (amd64fbsd_read_description): New function. (_initialize_amd64fbsd_nat): Set "to_read_description" to "amd64fbsd_read_description". * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function. (amd64fbsd_supply_xstateregset): New function. (amd64fbsd_collect_xstateregset): New function. Add "amd64fbsd_xstateregset". (amd64fbsd_iterate_over_regset_sections): New function. (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to "I386_FBSD_XSAVE_XCR0_OFFSET". Add "iterate_over_regset_sections" gdbarch method. Add "core_read_description" gdbarch method. * i386-tdep.c (i386_target_description): New function. * i386-tdep.h: Export i386_target_description and tdesc_i386. * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len. (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle x86 extended save area. (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise. * i386bsd-nat.h: Export i386bsd_xsave_len. * i386fbsd-nat.c (i386fbsd_read_description): New function. (_initialize_i386fbsd_nat): Set "to_read_description" to "i386fbsd_read_description". * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function. (i386fbsd_core_read_description): New function. (i386fbsd_supply_xstateregset): New function. (i386fbsd_collect_xstateregset): New function. Add "i386fbsd_xstateregset". (i386fbsd_iterate_over_regset_sections): New function. (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to "I386_FBSD_XSAVE_XCR0_OFFSET". Add "iterate_over_regset_sections" gdbarch method. Add "core_read_description" gdbarch method. * i386fbsd-tdep.h: New file.
2015-01-01	Update year range in copyright notice of all files owned by the GDB project.	Joel Brobecker	1	-1/+1
	gdb/ChangeLog: Update year range in copyright notice of all files.
2014-01-01	Update Copyright year range in all files maintained by GDB.	Joel Brobecker	1	-1/+1

2013-01-01	Update years in copyright notice for the GDB files.	Joel Brobecker	1	-1/+1
	Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-02-09	2012-02-09 Valery Khromov <valery.khromov@gmail.com>	Pedro Alves	1	-0/+35
	PR gdb/12953 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h. * amd64bsd-nat.c: Add support for debug registers (adapted from i386bsd-nat.c). [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set) (amd64bsd_dr_set_control, amd64bsd_dr_set_addr) (amd64bsd_dr_get_addr, amd64bsd_dr_get_status) (amd64bsd_dr_get_control): New functions. * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h). * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h". [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware watchpoints initialization. * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.