aboutsummaryrefslogtreecommitdiff
path: root/gas/doc/as.texi
AgeCommit message (Collapse)AuthorFilesLines
2021-01-14gas: make [248]byte directives available everywhereMike Frysinger1-7/+0
These aren't specific to ELF at all, and seem generally useful. So pull them out of the ELF backend and into the common core.
2021-01-06RISC-V: Mention -mbig-endian and -mlittle-endian in docMarcus Comstedt1-0/+1
gas/ * doc/as.texi: Add -mlittle-endian and -mbig-endian to docs. * doc/c-riscv.texi: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-3/+3
2020-11-18Re: Stop Gas from generating line info or address rangesAlan Modra1-5/+9
* doc/as.texi (.nop): Document optional size arg. * dwarf2dbg.c (dwarf2_gen_line_info_1): Only check SEC_ALLOC when ELF. Warn whenever dwarf line number information is ignored. * frags.c (frag_offset_ignore_align_p): New function. * frags.h (frag_offset_ignore_align_p): Declare. * read.c (s_nop): Extend to support optional size arg. * testsuite/gas/elf/dwarf2-20.d: Expect warnings, and exact range. * testsuite/gas/elf/dwarf2-20.s: Emit 16 bytes worth of nops. * testsuite/gas/m68hc11/indexed12.d: Expect warnings.
2020-11-18Support SHF_GNU_RETAIN ELF section flagJozef Lawrynowicz1-0/+3
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ | Name | Value | +-------------------------------------+ | SHF_GNU_RETAIN | 0x200000 (1 << 21) | +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test.
2020-11-17When reading string arguments for the assembler's string directives treat ↵Nick Clifton1-1/+3
space separated strings as a single entity. * read.c (stringer): Treat space separated, quote enclosed strings as a single string. * doc/as.texi (asciz): Mention this behaviour in the description of the asciz directive. * testsuite/gas/all/asciz.s: New test. * testsuite/gas/all/asciz.d: New test driver. * testsuite/gas/all/gas.exp: Run the new test.
2020-10-05Fix spelling mistakesSamanta Navarro1-1/+1
2020-10-05GAS: Update the .section directive so that a numeric section index can be ↵Nick Clifton1-2/+5
provided when the "o" flag is used. PR 26253 gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for the "o" section flag. Interpret it as a section index. Allow an index of zero. * doc/as.texi: Document the new behaviour. * NEWS: Mention the new feature. Tidy entries. * testsuite/gas/elf/sh-link-zero.s: New test. * testsuite/gas/elf/sh-link-zero.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/elf/section21.l: Updated expected assembler output. bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an sh_link value of zero when the SLF_LINK_ORDER flag is set. (assign_section_numbers): Likewise.
2020-10-01Add new directive to GAS: .attach_to_group.Nick Clifton1-1/+11
* config/obj-elf (elf_pseudo_table): Add attach_to_group. (obj_elf_attach_to_group): New function. * doc/as.texi: Document the new directive. * NEWS: Mention the new feature. * testsuite/gas/elf/attach-1.s: New test. * testsuite/gas/elf/attach-1.d: New test driver. * testsuite/gas/elf/attach-2.s: New test. * testsuite/gas/elf/attach-2.d: New test driver. * testsuite/gas/elf/attach-err.s: New test. * testsuite/gas/elf/attach-err.d: New test driver. * testsuite/gas/elf/attach-err.err: New test error output. * testsuite/gas/elf/elf.exp: Run the new tests.
2020-09-14Add a new ".nop" directive to the assembler to allow the creation of no-op ↵Nick Clifton1-11/+21
instructions in an architeture neutral manner. * read.c (s_nop): New function. Handles the .nop directive. (potable): Add entry for "nop". (s_nops): Code tidy. * read.h (s_nop): Add prototype. * config/tc-bpf.h (md_single_noop_insn): Define. * config/tc-mmix.h (md_single_noop_insn): Define. * config/tc-or1k.h (md_single_noop_insn): Define. * config/tc-s12z.c (md_assemble): Preserve the input line pointer, rather than corrupting it. * write.c (relax_segment): Update error message regarding non-absolute values passed to .fill and .nops. * NEWS: Mention the new directive. * doc/as.texi: Document the new directive. * doc/internals.texi: Document the new internal macros used to implement the new directive. * testsuite/gas/all/nop.s: New test. * testsuite/gas/all/nop.d: New test control file. * testsuite/gas/all/gas.exp: Run the new test. * testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test. * testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test control file. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/i386/space1.l: Adjust expected output.
2020-09-11gas: Don't error when .debug_line already exists, unless .loc was usedMark Wielaard1-2/+5
When -g was used to generate DWARF gas would error out when a .debug_line already exists. But when a .debug_info section already exists it would simply skip generating one without warning or error. Do the same for .debug_line. It is only an error when the user explicitly uses .loc directives and also generates the .debug_line table itself. The tests are unfortunately arch specific because the line table is only generated when actual instructions have been emitted. Use i386 because that is probably the most used architecture. Before this patch the new dwarf-line-2 testcase would fail, with this patch it succeeds (and doesn't try to add its own line table). gas/ChangeLog: * as.texi (-g): Explicitly mention when .debug_info and .debug_line are generated for the DWARF format. (Loc): Add that it is an error to both use a .loc directive and generate a .debug_line yourself. * dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable. (dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE. (dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting an error. Only create .debug_line if it is empty (or doesn't exist). * testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing an elf target. * testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
2020-09-01ELF: Document the .tls_common directiveH.J. Lu1-0/+13
Document the .tls_common directive added by commit b8871f357fdfa9c0c06d2d3e5600391d8c994f37 Author: H.J. Lu <hjl.tools@gmail.com> Date: Mon Feb 22 09:18:52 2016 -0800 Properly implement STT_COMMON * doc/as.texi: Document the .tls_common directive.
2020-08-20Remove --reduce-memory-overheads and --hash-size arguments.Martin Liska1-13/+0
* NEWS: Mention --reduce-memory-overheads and --hash-size arguments options. * as.c: Remove the options from help. * doc/as.texi: Remove options. * doc/internals.texi: Remove hash from documentation. * hash.c (struct hash_entry): Remove. (struct hash_control): Likewise. (set_gas_hash_table_size): Likewise. (hash_new_sized): Likewise. (hash_new): Likewise. (hash_die): Likewise. (hash_lookup): Likewise. (hash_insert): Likewise. (hash_jam): Likewise. (hash_replace): Likewise. (hash_find): Likewise. (hash_find_n): Likewise. (hash_delete): Likewise. (hash_traverse): Likewise. (hash_print_statistics): Likewise. (TABLES): Likewise. (STATBUFSIZE): Likewise. (main): Likewise. (what): Likewise. (destroy): Likewise. (applicatee): Likewise. (whattable): Likewise. * hash.h (struct hash_control): Likewise. (set_gas_hash_table_size): Likewise. (hash_new): Likewise. (hash_new_sized): Likewise. (hash_die): Likewise. (hash_insert): Likewise. (hash_jam): Likewise. (hash_replace): Likewise. (hash_find): Likewise. (hash_find_n): Likewise. (hash_delete): Likewise. (hash_traverse): Likewise. (hash_print_statistics): Likewise.
2020-08-04gas: Fix as.texi typo infortmationMark Wielaard1-3/+3
gas/ChangeLog: * doc/as.texi (--gdwarf-[345]): Fix typo.
2020-07-27doc: Replace preceeded with precededH.J. Lu1-1/+1
binutils/ * doc/binutils.texi: Replace preceeded with preceded. gas/ * doc/as.texi: Replace preceeded with preceded.
2020-06-26m68k: tag floating-point ABI usedPat Bernardi1-0/+16
This patch adds GNU attribute support to m68k and utilises it to tag the floating-point calling convention used (hard-float or soft-float). It enables the linker to ensure linked objects use a consistent floating-point ABI and allows tools like GDB to infer the ABI used from the ELF file. It is based on similar work done for PowerPC. bfd/ * elf32-m68k.c (m68k_elf_merge_obj_attributes): New function. (elf32_m68k_merge_private_bfd_data): Merge GNU attributes. binutils/ * readelf.c (display_m68k_gnu_attribute): New function. (process_arch_specific): Call display_m68k_gnu_attribute for EM_68K. gas/ * config/tc-m68k.c (m68k_elf_gnu_attribute): New function. (md_pseudo_table): Handle "gnu_attribute". * doc/as.texi: Document GNU attribute for M68K. include/ * elf/m68k.h: Add enum for GNU object attribute with floating point tag name and values. ld/ * testsuite/ld-m68k/attr-gnu-4-0.s: New file. * testsuite/ld-m68k/attr-gnu-4-1.s: Likewise. * testsuite/ld-m68k/attr-gnu-4-2.s: Likewise. * testsuite/ld-m68k/attr-gnu-4-00.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-01.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-02.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-10.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-11.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-12.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-20.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-21.d: Likewise. * testsuite/ld-m68k/attr-gnu-4-22.d: Likewise. * testsuite/ld-m68k/m68k.exp: Run the new tests.
2020-06-15xtensa: allow runtime ABI selectionMax Filippov1-0/+1
2020-06-15 Max Filippov <jcmvbkbc@gmail.com> bfd/ * elf32-xtensa.c (XSHAL_ABI, XTHAL_ABI_UNDEFINED) (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New macros. (elf32xtensa_abi): New global variable. (xtensa_abi_choice): New function. (elf_xtensa_create_plt_entry): Use xtensa_abi_choice instead of XSHAL_ABI to select PLT code. gas/ * config/tc-xtensa.c (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New macros. (elf32xtensa_abi): New declaration. (option_abi_windowed, option_abi_call0): New enum constants. (md_longopts): Add entries for --abi-windowed and --abi-call0. (md_parse_option): Add handlers for --abi-windowed and --abi-call0. (xtensa_add_config_info): Use xtensa_abi_choice instead of XSHAL_ABI to format ABI tag. * doc/as.texi (Target Xtensa options): Add --abi-windowed and --abi-call0 to the list of options. * doc/c-xtensa.texi: Add description for options --abi-windowed and --abi-call0. * testsuite/gas/xtensa/abi-call0.d: New test definition. * testsuite/gas/xtensa/abi-windowed.d: New test definition. * testsuite/gas/xtensa/abi.s: New test source. include/ * elf/xtensa.h (xtensa_abi_choice): New declaration. ld/ * emultempl/xtensaelf.em (XSHAL_ABI): Remove macro definition. (XTHAL_ABI_UNDEFINED, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New macros. (elf32xtensa_abi): New declaration. (xt_config_info_unpack_and_check): Set elf32xtensa_abi if it is undefined. Use xtensa_abi_choice instead of XSHAL_ABI to test ABI tag consistency. (xtensa_add_config_info): Use xtensa_abi_choice instead of XSHAL_ABI to format ABI tag. (PARSE_AND_LIST_PROLOGUE): Define OPTION_ABI_WINDOWED, OPTION_ABI_CALL0 and declare elf32xtensa_abi. (PARSE_AND_LIST_LONGOPTS): Add entries for --abi-windowed and --abi-call0. (PARSE_AND_LIST_OPTIONS): Add help text for --abi-windowed and --abi-call0. (PARSE_AND_LIST_ARGS_CASES): Add handlers for --abi-windowed and --abi-call0. * ld.texi: Add description for options --abi-windowed and --abi-call0.
2020-05-06Section "3.1 Preprocessing" of the online GAS manual has a wrong reference ↵Nick Clifton1-2/+3
to "Using GNU CC". This fixes that link. PR 25927 * doc/as.texi (Preprocessing): Replace cross reference to not existant document with a URL to the equivalent page in the GCC manual.
2020-04-22.symver fixesAlan Modra1-4/+3
* config/obj-elf.c (elf_frob_symbol): Unconditionally remove symbol for ".symver .. remove". * doc/as.texi (.symver): Update. * testsuite/gas/symver/symver11.s: Make foo weak. * testsuite/gas/symver/symver11.d: Expect an error. * testsuite/gas/symver/symver7.d: Allow other random symbols.
2020-04-21gas: Extend .symver directiveH.J. Lu1-4/+12
Extend .symver directive to update visibility of the original symbol and assign one original symbol to different versioned symbols: .symver foo, foo@VERS_1, local # Change foo to a local symbol. .symver foo, foo@VERS_2, hidden # Change foo to a hidden symbol. .symver foo, foo@@VERS_3, remove # Remove foo from symbol table. .symver foo, bar@V1 # Assign foo to bar@V1 and baz@V2. .symver foo, baz@V2 PR gas/23840 PR gas/25295 * NEWS: Mention .symver extension. * config/obj-elf.c (obj_elf_find_and_add_versioned_name): New function. (obj_elf_symver): Call obj_elf_find_and_add_versioned_name to add a version name. Add local, hidden and remove visibility support. (elf_frob_symbol): Handle the list of version names. Update the original symbol to local, hidden or remove it from the symbol table. (elf_frob_file_before_adjust): Handle the list of version names. * config/obj-elf.h (elf_visibility): New. (elf_versioned_name_list): Likewise. (elf_obj_sy): Change local to bitfield. Add rename, bad_version and visibility. Change versioned_name pointer to struct elf_versioned_name_list. * doc/as.texi: Update .symver directive. * testsuite/gas/symver/symver.exp: Run all *.d tests. Add more error checking tests. * testsuite/gas/symver/symver6.d: New file. * testsuite/gas/symver/symver7.d: Likewise. * testsuite/gas/symver/symver7.s: Likewise. * testsuite/gas/symver/symver8.d: Likewise. * testsuite/gas/symver/symver8.s: Likewise. * testsuite/gas/symver/symver9.s: Likewise. * testsuite/gas/symver/symver9a.d: Likewise. * testsuite/gas/symver/symver9b.d: Likewise. * testsuite/gas/symver/symver10.s: Likewise. * testsuite/gas/symver/symver10a.d: Likewise. * testsuite/gas/symver/symver10b.d: Likewise. * testsuite/gas/symver/symver11.d: Likewise. * testsuite/gas/symver/symver11.s: Likewise. * testsuite/gas/symver/symver12.d: Likewise. * testsuite/gas/symver/symver12.s: Likewise. * testsuite/gas/symver/symver13.d: Likewise. * testsuite/gas/symver/symver13.s: Likewise. * testsuite/gas/symver/symver14.d: Likewise. * testsuite/gas/symver/symver14.l: Likewise. * testsuite/gas/symver/symver15.d: Likewise. * testsuite/gas/symver/symver15.l: Likewise. * testsuite/gas/symver/symver6.l: Removed. * testsuite/gas/symver/symver6.s: Updated.
2020-03-11Add support for generating DWARF-5 format directory and file name tables ↵Nick Clifton1-1/+17
from the assembler. PR 25611 PR 25614 * dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and li_segment_size fields. * dwarf.c (read_debug_line_header): Record the address size and segment selector size values (if present) in the lineinfo structure. (display_formatted_table): Warn if the format count is empty but the table itself is not empty. Display the format count and entry count at the start of the table dump. (display_debug_lines_raw): Display the address size and segement selector size fields, if present. * testsuite/binutils-all/dw5.W: Update expected output. gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1. (DWARF2_FILE_SIZE_NAME): Default to -1. (DWARF2_LINE_VERSION): Default to the current dwarf level or 3, whichever is higher. (DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1. (NUM_MD5_BYTES): Define. (struct file entry): Add md5 field. (get_filenum): Delete and replace with... (get_basename): New function. (get_directory_table_entry): New function. (allocate_filenum): New function. (allocate_filename_to_slot): New function. (dwarf2_where): Use new functions. (dwarf2_directive_filename): Add support for extended .file pseudo-op. (dwarf2_directive_loc): Allow the use of file number zero with DWARF 5 or higher. (out_file_list): Rename to... (out_dir_and_file_list): Add DWARF 5 support. (out_debug_line): Emit extra values into the section header for DWARF 5. (out_debug_str): Allow for file 0 to be used with DWARF 5. * doc/as.texi (.file): Update the description of this pseudo-op. * testsuite/gas/elf-dwarf-5-file0.s: Add more lines. * testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output. * testsuite/gas/lns/lns-diag-1.l: Update expected error message. * NEWS: Mention the new feature.
2020-03-06Add support for a ".file 0" directive if supporting DWARF 5 or higher.Nick Clifton1-1/+1
PR 25614 * dwarf2dbg.c (dwarf2_directive_filename): Allow a file number of 0 if the dwarf_level is 5 or more. Complain if a filename follows a file 0. * testsuite/gas/elf/dwarf-5-file0.s: New test. * testsuite/gas/elf/dwarf-5-file0.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test. PR 25612 * config/tc-ia64.h (DWARF2_VERISION): Fix typo. * doc/as.texi: Fix another typo.
2020-03-06Add support for --dwarf-[3|4|5] to assembler command line.Nick Clifton1-1/+22
PR 25612 * as.c (dwarf_level): Define. (show_usage): Add --gdwarf-3, --gdwarf-4 and --gdwarf-5. (parse_args): Add support for the new options. as.h (dwarf_level): Prototype. * dwarf2dbg.c (DWARF2_VERSION): Use dwarf_level as default version value. * config/tc-ia64.h (DWARF2_VERISION): Update definition. (DWARF2_LINE_VERSION): Remove definition. * doc/as.texi: Document the new options.
2020-02-19Various fixes for the Z80 support.Sergey Belyashov1-10/+1
PR 25537 ld * emultempl/z80.em: Remove machine compatability checking. PR 25517 * testsuite/ld-z80/arch_ez80_adl.d: Update command line. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80n.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z80_ez80.d: Likewise. * testsuite/ld-z80/comb_arch_z80_z180.d: Likewise. * testsuite/ld-z80/comb_arch_z80_z80n.d: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_ez80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80n.d: Likewise. bfd * cpu-z80.c: Add machine type compatibility checking. gas * config/tc-z80.c (md_parse_option): Do not use an underscore prefix for local labels in SDCC compatability mode. (z80_start_line_hook): Remove SDCC dollar label support. * testsuite/gas/z80/sdcc.d: Update expected disassembly. * testsuite/gas/z80/sdcc.s: Likewise. * config/tc-z80.c: Add -march option. * doc/as.texi: Update Z80 documentation. * doc/c-z80.texi: Likewise. * testsuite/gas/z80/ez80_adl_all.d: Update command line. * testsuite/gas/z80/ez80_adl_suf.d: Likewise. * testsuite/gas/z80/ez80_pref_dis.d: Likewise. * testsuite/gas/z80/ez80_z80_all.d: Likewise. * testsuite/gas/z80/ez80_z80_suf.d: Likewise. * testsuite/gas/z80/gbz80_all.d: Likewise. * testsuite/gas/z80/r800_extra.d: Likewise. * testsuite/gas/z80/r800_ii8.d: Likewise. * testsuite/gas/z80/r800_z80_doc.d: Likewise. * testsuite/gas/z80/sdcc.d: Likewise. * testsuite/gas/z80/z180.d: Likewise. * testsuite/gas/z80/z180_z80_doc.d: Likewise. * testsuite/gas/z80/z80_doc.d: Likewise. * testsuite/gas/z80/z80_ii8.d: Likewise. * testsuite/gas/z80/z80_in_f_c.d: Likewise. * testsuite/gas/z80/z80_op_ii_ld.d: Likewise. * testsuite/gas/z80/z80_out_c_0.d: Likewise. * testsuite/gas/z80/z80_sli.d: Likewise. * testsuite/gas/z80/z80n_all.d: Likewise. * testsuite/gas/z80/z80n_reloc.d: Likewise.
2020-02-06ELF: Support the section flag 'o' in .section directiveH.J. Lu1-0/+27
As shown in https://sourceware.org/bugzilla/show_bug.cgi?id=25490 --gc-sections will silently remove __patchable_function_entries section and generate corrupt result. This patch adds the section flag 'o' to .section directive: .section __patchable_function_entries,"awo",@progbits,foo .section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat .section __patchable_function_entries,"awo",@progbits,bar,unique,4 .section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1 which specifies the symbol name which the section references. Assmebler will set its elf_linked_to_section to a local section where the symbol is defined. Linker is updated to call mark_hook if gc_mark of any of its linked-to sections is set after all sections, except for backend specific ones, have been garbage collected. bfd/ PR gas/25381 * bfd-in2.h: Regenerated. * elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook on section if gc_mark of any of its linked-to sections is set and don't set gc_mark again. * section.c (asection): Add linked_to_symbol_name to map_head union. gas/ PR gas/25381 * config/obj-elf.c (get_section): Also check linked_to_symbol_name. (obj_elf_change_section): Also set map_head.linked_to_symbol_name. (obj_elf_parse_section_letters): Handle the 'o' flag. (build_group_lists): Renamed to ... (build_additional_section_info): This. Set elf_linked_to_section from map_head.linked_to_symbol_name. (elf_adjust_symtab): Updated. * config/obj-elf.h (elf_section_match): Add linked_to_symbol_name. * doc/as.texi: Document the 'o' flag. * testsuite/gas/elf/elf.exp: Run PR gas/25381 tests. * testsuite/gas/elf/section18.d: New file. * testsuite/gas/elf/section18.s: Likewise. * testsuite/gas/elf/section19.d: Likewise. * testsuite/gas/elf/section19.s: Likewise. * testsuite/gas/elf/section20.d: Likewise. * testsuite/gas/elf/section20.s: Likewise. * testsuite/gas/elf/section21.d: Likewise. * testsuite/gas/elf/section21.l: Likewise. * testsuite/gas/elf/section21.s: Likewise. ld/ PR ld/24526 PR ld/25021 PR ld/25490 * testsuite/ld-elf/elf.exp: Run PR ld/25490 tests. * testsuite/ld-elf/pr24526.d: New file. * testsuite/ld-elf/pr24526.s: Likewise. * testsuite/ld-elf/pr25021.d: Likewise. * testsuite/ld-elf/pr25021.s: Likewise. * testsuite/ld-elf/pr25490-2-16.rd: Likewise. * testsuite/ld-elf/pr25490-2-32.rd: Likewise. * testsuite/ld-elf/pr25490-2-64.rd: Likewise. * testsuite/ld-elf/pr25490-2.s: Likewise. * testsuite/ld-elf/pr25490-3-16.rd: Likewise. * testsuite/ld-elf/pr25490-3-32.rd: Likewise. * testsuite/ld-elf/pr25490-3-64.rd: Likewise. * testsuite/ld-elf/pr25490-3.s: Likewise. * testsuite/ld-elf/pr25490-4-16.rd: Likewise. * testsuite/ld-elf/pr25490-4-32.rd: Likewise. * testsuite/ld-elf/pr25490-4-64.rd: Likewise. * testsuite/ld-elf/pr25490-4.s: Likewise. * testsuite/ld-elf/pr25490-5-16.rd: Likewise. * testsuite/ld-elf/pr25490-5-32.rd: Likewise. * testsuite/ld-elf/pr25490-5-64.rd: Likewise. * testsuite/ld-elf/pr25490-5.s: Likewise. * testsuite/ld-elf/pr25490-6-16.rd: Likewise. * testsuite/ld-elf/pr25490-6-32.rd: Likewise. * testsuite/ld-elf/pr25490-6-64.rd: Likewise. * testsuite/ld-elf/pr25490-6.s: Likewise.
2020-02-02ELF: Add support for unique section ID to assemblerH.J. Lu1-0/+12
Clang's integrated assembler supports multiple section with the same name: .section .text,"ax",@progbits,unique,1 nop .section .text,"ax",@progbits,unique,2 nop "unique,N" assigns the number, N, as the section ID, to a section. The valid values of the section ID are between 0 and 4294967295. It can be used to distinguish different sections with the same section name. This is useful with -fno-unique-section-names -ffunction-sections. -ffunction-sections by default generates .text.foo, .text.bar, etc. Using the same string can save lots of space in .strtab. This patch adds section_id to bfd_section and reuses the linker internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler internal use to mark valid section_id. It also updates objdump to compare section pointers if 2 sections comes from the same file since 2 different sections can have the same section name. bfd/ PR gas/25380 * bfd-in2.h: Regenerated. * ecoff.c (bfd_debug_section): Add section_id. * section.c (bfd_section): Add section_id. (SEC_ASSEMBLER_SECTION_ID): New. (BFD_FAKE_SECTION): Add section_id. binutils/ PR gas/25380 * objdump.c (sym_ok): Return FALSE if 2 sections are in the same file with different section pointers. gas/ PR gas/25380 * config/obj-elf.c (section_match): Removed. (get_section): Also match SEC_ASSEMBLER_SECTION_ID and section_id. (obj_elf_change_section): Replace info and group_name arguments with match_p. Also update the section ID and flags from match_p. (obj_elf_section): Handle "unique,N". Update call to obj_elf_change_section. * config/obj-elf.h (elf_section_match): New. (obj_elf_change_section): Updated. * config/tc-arm.c (start_unwind_section): Update call to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texi: Document "unique,N" in .section directive. * testsuite/gas/elf/elf.exp: Run "unique,N" tests. * testsuite/gas/elf/section15.d: New file. * testsuite/gas/elf/section15.s: Likewise. * testsuite/gas/elf/section16.s: Likewise. * testsuite/gas/elf/section16a.d: Likewise. * testsuite/gas/elf/section16b.d: Likewise. * testsuite/gas/elf/section17.d: Likewise. * testsuite/gas/elf/section17.l: Likewise. * testsuite/gas/elf/section17.s: Likewise. * testsuite/gas/i386/unique.d: Likewise. * testsuite/gas/i386/unique.s: Likewise. * testsuite/gas/i386/x86-64-unique.d: Likewise. * testsuite/gas/i386/i386.exp: Run unique and x86-64-unique. ld/ PR gas/25380 * testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section directives. * testsuite/ld-i386/tls-gd1.S: Likewise. * testsuite/ld-x86-64/pr21481b.S: Likewise.
2020-01-14Fix various assembler testsuite failures for the Z80 target.Sergey Belyashov1-67/+18
PR 25377 gas * config/tc-z80.c: Add support for half precision, single precision and double precision floating point values. * config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes. * doc/as.texi: Add new z80 command line options. * doc/c-z80.texi: Document new z80 command line options. * testsuite/gas/z80/ez80_pref_dis.s: New test. * testsuite/gas/z80/ez80_pref_dis.d: New test driver. * testsuite/gas/z80/z80.exp: Run the new test. * testsuite/gas/z80/fp_math48.d: Use correct command line option. * testsuite/gas/z80/fp_zeda32.d: Likewise. * testsuite/gas/z80/strings.d: Update expected output. opcodes * z80-dis.c (suffix): Use .db instruction to generate double prefix.
2020-01-08Document the fact that the assembler's alignment pseudo-ops can be issued ↵Nick Clifton1-9/+12
without any argumemtns. PR 25284 * doc/as.texi (Align): Document the fact that all arguments can be omitted. (Balign): Likewise. (P2align): Likewise.
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-2/+45
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-3/+3
2019-12-17Remove tic80 supportAlan Modra1-1/+1
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2019-11-18gas: Add --gdwarf-cie-version command line flagAndrew Burgess1-0/+6
Add a flag to control the version of CIE that is generated. By default gas produces CIE version 1, and this continues to be the default after this patch. However, a user can now provide --gdwarf-cie-version=NUMBER to switch to either version 3 or version 4 of CIE, version 2 was never released, and so causes an error as does any number less than 1 or greater than 4. Producing version 4 CIE requires two new fields to be added to the CIE, an address size field, and an segment selector field. For a flat address space the DWARF specification indicates that the segment selector should be 0, and the address size fields just contains the address size in bytes. For now we support 4 or 8 byte addresses, and the segment selector is always produced as 0. At some future time we might need to allow targets to override this. gas/ChangeLog: * as.c (parse_args): Parse --gdwarf-cie-version option. (flag_dwarf_cie_version): New variable. * as.h (flag_dwarf_cie_version): Declare. * dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to flag_dwarf_cie_version. * doc/as.texi (Overview): Document --gdwarf-cie-version. * NEWS: Likewise. * testsuite/gas/cfi/cfi.exp: Add new tests. * testsuite/gas/cfi/cie-version-0.d: New file. * testsuite/gas/cfi/cie-version-1.d: New file. * testsuite/gas/cfi/cie-version-2.d: New file. * testsuite/gas/cfi/cie-version-3.d: New file. * testsuite/gas/cfi/cie-version-4.d: New file. * testsuite/gas/cfi/cie-version.s: New file. include/ChangeLog: * dwarf2.h (DW_CIE_VERSION): Delete. Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
2019-10-08S/390: Add support for z15 as CPU name.Andreas Krebbel1-1/+2
So far z15 was identified as arch13. After the machine has been announced we can now add the real name. gas/ChangeLog: 2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com> * config/tc-s390.c (s390_parse_cpu): Add z15 as alternate CPU name. * doc/as.texi: Add z15 to CPU string list. * doc/c-s390.texi: Likewise. opcodes/ChangeLog: 2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com> * s390-mkopc.c (main): Enable z15 as CPU string in the opcode table.
2019-10-07Add support for new functionality in the msp430 backend of GCC.Jozef Lawrynowicz1-0/+17
This functionality will generate a new GNU object attribute for the "data region" has been added. This object attribute is used mark whether the compiler has generated code assuming that data could be in the upper or lower memory regions. Code which assumes data is always in the lower memory region is incompatible with code which uses the full memory range for data. The patch also adds a new assembler directive ".mspabi_attribute" to handle the existing MSPABI object attributes. GCC will now emit both .gnu_attribute and .mspabi_attribute directives to indicate what options the source file was compiled with. The assembler will now check the values set in these directives against the options that the it has been invoked with. If there is a discrepancy, the assembler will exit with an error. bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to.. (elf32_msp430_merge_msp430_attributes): Add support for merging the GNU object attribute for data region. binutils* readelf.c (display_msp430_gnu_attribute): New. (process_arch_specific): Use msp430 specific handler for GNU attributes. gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to FALSE if the data region is set to "upper", "either" or "none". (msp430_object_attribute): New. (md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute. (msp430_md_end): Replace hard-coded attribute values with enums. Handle data region object attribute. * doc/as.texi: Document MSP430 Data Region object attribute. * doc/c-msp430.texi: Document the .mspabi_attribute directive. * testsuite/gas/msp430/attr-430-small-bad.d: New test. * testsuite/gas/msp430/attr-430-small-bad.l: New test. * testsuite/gas/msp430/attr-430-small-good.d: New test. * testsuite/gas/msp430/attr-430-small.s: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-any-good.d: New test. * testsuite/gas/msp430/attr-430x-large-any.s: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-lower-good.d: New test. * testsuite/gas/msp430/attr-430x-large-lower.s: New test. * testsuite/gas/msp430/msp430.exp: Run new tests. include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names and values. ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test. * testsuite/ld-msp430-elf/attr-gnu-obj.s: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test. * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
2019-07-04gas/ELF: don't accumulate .type settingsJan Beulich1-0/+4
Recently a patch was submitted for a Xen Project test harness binary to override the compiler specified @object to @func (see [1]). In a reply I suggested we shouldn't make ourselves dependent on currently unspecified behavior of gas here: It accumulates all requests, and then bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes certain flags over others. Make the behavior predictable: Generally the last .type is what counts. Exceptions are directives which set multiple bits (TLS, IFUNC, and UNIQUE): Subsequent directives requesting just the more generic bit (i.e. FUNC following IFUNC) won't clear the more specific one. Warn about incompatible changes, except from/to STT_NOTYPE. Also add a new target hook, which hppa wants to use right away afaict. In the course of adding the warning I ran into two ld testsuite failures. I can only assume that it was a copy-and-paste mistake that lead to the same symbol having its type set twice. [1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
2019-07-01Correct a typo in the description of the Align and P2align directives.Nick Clifton1-2/+2
PR 24737 * doc/as.texi (Align): Add missing word to description of pseudo-op. (P2align): Likewise.
2019-07-01Fix spelling error in assembler documentation.Nick Clifton1-1/+1
2019-05-23gas: add support for eBPFJose E. Marchesi1-0/+34
This patch adds a port for the Linux kernel eBPF to the GNU assembler. A testsuite and documentation updates are included. gas/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Handle bpf-*-* targets. * configure.tgt (generic_target): Likewise. * configure: Regenerate. * Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c. (TARGET_CPU_HFILES): Add tc-bpf.h. * Makefile.in: Regenerated. * config/tc-bpf.c: New file. * config/tc-bpf.h: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-bpf.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: set BPF. * doc/as.texi: Add eBPF contents. * doc/c-bpf.texi: New file. * testsuite/gas/bpf/alu.d: New file. * testsuite/gas/bpf/mem-be.d: Likewise. * testsuite/gas/bpf/mem.s: Likewise. * testsuite/gas/bpf/mem.d: Likewise. * testsuite/gas/bpf/lddw-be.d: Likewise. * testsuite/gas/bpf/lddw.s: Likewise. * testsuite/gas/bpf/lddw.d: Likewise. * testsuite/gas/bpf/jump-be.d: Likewise. * testsuite/gas/bpf/jump.s: Likewise. * testsuite/gas/bpf/jump.d: Likewise. * testsuite/gas/bpf/exit-be.d: Likewise. * testsuite/gas/bpf/exit.s: Likewise. * testsuite/gas/bpf/exit.d: Likewise. * testsuite/gas/bpf/call-be.d: Likewise. * testsuite/gas/bpf/call.s: Likewise. * testsuite/gas/bpf/call.d: Likewise. * testsuite/gas/bpf/bpf.exp: Likewise. * testsuite/gas/bpf/atomic-be.d: Likewise. * testsuite/gas/bpf/atomic.s: Likewise. * testsuite/gas/bpf/atomic.d: Likewise. * testsuite/gas/bpf/alu-be.d: Likewise. * testsuite/gas/bpf/alu32-be.d: Likewise. * testsuite/gas/bpf/alu32.s: Likewise. * testsuite/gas/bpf/alu32.d: Likewise. * testsuite/gas/bpf/alu.s: Likewise. * testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF. * testsuite/gas/all/org-1.s: Support nop_type 6. * testsuite/gas/all/org-1.l: Updated to reflect changes in org-1.s.
2019-05-15GAS (doc): Fix misaligned menu entry.John Darrington1-1/+1
gas/ * doc/as.texi (Machine Dependencies): Fix misaligned menu entry.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-3/+3
2018-11-30GAS/MIPS: Add `-mfix-r5900' option for the R5900 short loop erratumFredrik Noring1-0/+9
`-march=r5900' already enables the R5900 short loop workaround. However, the R5900 ISA and most other MIPS ISAs are mutually exclusive since R5900-specific instructions are generated as well. The `-mfix-r5900' option can be used in combination with e.g. `-mips2' or `-mips3' to generate generic MIPS binaries that also work with the R5900 target. This change has been tested with `make RUNTESTFLAGS=mips.exp check-gas' for the targets `mipsr5900el-unknown-linux-gnu', `mipsr5900el-elf' and `mips3-unknown-linux-gnu'. gas/ * config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit): New variables. (options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900 enumeration constants. (md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options. (can_swap_branch_p, md_parse_option, mips_after_parse_args): Handle the new options. (md_show_usage): Document the `-mfix-r5900' option. * doc/as.texi: Likewise. * doc/c-mips.texi: Likewise. * testsuite/gas/mips/mips.exp: Run R5900 dump tests. * testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option. * testsuite/gas/mips/r5900-fix.s: Likewise. * testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'. * testsuite/gas/mips/r5900-no-fix.s: Likewise.
2018-10-05or1k: Add OpenRISC gas documentationStafford Horne1-0/+10
gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * doc/Makefile.am (CPU_DOCS): Add entry for OpenRISC. * doc/Makefile.in: Regenerated. * doc/all.texi: Set OPENRISC. * doc/as.texi: Document OpenRISC. * doc/c-or1k.texi: New file.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu1-0/+8
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu1-0/+7
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu1-0/+7
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+46
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-26PowerPC Improve support for Gekko & BroadwayAlex Chadwick1-4/+4
This is a relatively straightforward patch to improve support for the IBM Gekko and IBM Broadway processors. Broadway is functionally equivalent to the IBM 750CL, while Gekko's functionality is a subset of theirs. The patch simplifies this reality and adds -mgekko and -mbroadway as aliases for -m750cl. I didn't feel it was worth wasting a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of simplified mnemonics for special purpose register access. Notably, Broadway adds 4 additional IBAT and DBAT registers but these are not assigned sequential SPR numbers. gas/ * config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway. * doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * testsuite/gas/ppc/broadway.d, * testsuite/gas/ppc/broadway.s: New test for broadway. * testsuite/gas/ppc/ppc.exp: Run new test. include/ * opcode/ppc.h (PPC_OPCODE_750): Adjust comment. opcodes/ * ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway. (powerpc_init_dialect): Handle bfd_mach_ppc_750. * ppc-opc.c (insert_sprbat, extract_sprbat): New functions to support disjointed BAT. (powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR. (XSPRGQR_MASK, GEKKO, BROADWAY): Define. (powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-20MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3aChenghua Xu1-0/+8
The MMI instruction set has been implemented in many Loongson processors. There is a lot of software optimized for MMI. This patch splits MMI from loongson2f/3a, and adds GAS and disassembler options for MMI instructions. 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@mips.com> bfd/ * elfxx-mips.c (print_mips_ases): Add MMI extension. binutils/ * readelf.c (print_mips_ases): Add MMI extension. gas/ * NEWS: Mention MultiMedia extensions Instructions (MMI) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and OPTION_NO_LOONGSON_MMI. (md_longopts): Likewise. (mips_ases): Define availability for MMI. (mips_convert_ase_flags): Map ASE_LOONGSON_MMI to AFL_ASE_LOONGSON_MMI. (mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a. (md_show_usage): Add help for -mloongson-mmi and -mno-loongson-mmi. * doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi. * doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi, .set loongson-mmi and .set noloongson-mmi. * testsuite/gas/mips/loongson-2f.d: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-2f.s: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.s: Here. * testsuite/gas/mips/loongson-3a.d: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a.s: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.s: Here. * testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and loongson-3a-mmi tests. include/ * elf/mips.h (AFL_ASE_MMI): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI. * opcode/mips.h (ASE_LOONGSON_MMI): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add MMI to loongson2f and loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-mmi option. (print_mips_disassembler_options): Document -M loongson-mmi. * mips-opc.c (LMMI): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI instructions.
2018-07-02Fix use of "command line X" in binutils docThomas Preud'homme1-9/+9
Binutils documentation uses a mix of spelling for the compound word "command-line X". According to [1]: "Sometimes compound words are written separately (nail polish), sometimes with a hyphen (short-sighted) and sometimes as one word (eyelashes). Often new compounds are written as two separate words and, as they become more familiar, they are either connected with a hyphen (-) or made into one word." I think command-line X is common enough in our industry that the two workds command and line should be connected. Since command-line is more common than commandline, I propose to update binutils documentation to consistently use "command-line" when this is used as an adjective to a noun (eg. command-line argument, command-line switch, command-line option and command-line flag). I've left occurences of "the command line" as is. I've also left gdb, sim and readline alone and have only touched public documentation (texi and NEWS files). [1] http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * doc/bfdint.texi: Use command-line consistently when used in a compount word. * doc/bfdsumm.texi: Likewise. binutils/ * NEWS: Use command-line consistently when used in a compount word. * doc/binutils.texi: Likewise and fix trailing whitespace on same line. gas/ * NEWS: Use command-line consistently when used in a compount word. * doc/as.texi: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cris.texi: Likewise. * doc/c-epiphany.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-lm32.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-nios2.texi: Likewise. * doc/c-ppc.texi: Likewise. * doc/c-pru.texi: Likewise. * doc/c-rl78.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/c-visium.texi: Likewise. * doc/c-xstormy16.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/c-z8k.texi: Likewise. * doc/internals.texi: Likewise. gprof/ * gprof.texi: Use command-line consistently when used in a compount word. ld/ * NEWS: Use command-line consistently when used in a compount word. * ld.texinfo: Likewise. * ldint.texinfo: Likewise.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-0/+8249
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
generated by cgit v1.1 at 2024-12-28 18:23:10 +0000