aboutsummaryrefslogtreecommitdiff
path: root/binutils
AgeCommit message (Collapse)AuthorFilesLines
2022-10-28binutils: Update my e-mail and Yunhai's e-mailLifang Xia1-2/+2
binutils/ * MAINTAINERS(C-SKY): update e-mails of Lifang & Yunhai.
2022-10-27Fuzzed files in archivesAlan Modra1-0/+1
Given a fuzzed object file in an archive with section size exceeding file size, objcopy will report an error like "section size (0xfeffffff bytes) is larger than file size (0x17a bytes)" but will create a copy of the object laid out for the large section. That means a large temporary file on disk that is read back and written to the output archive, which can take a while. The output archive is then deleted due to the error. Avoid some of this silliness. * objcopy.c (copy_section): If section contents cannot be read set output section size to zero.
2022-10-26segfault in objdump.c reloc_atAlan Modra1-2/+2
bfd_canonicalize_reloc returns -1L on errors. * objdump.c (load_specific_debug_section): Properly handle error return from bfd_canonicalize_reloc.
2022-10-26PR29720, objdump -S crashes if build-id is missingAlan Modra1-9/+11
PR 29720 * objdump.c (slurp_file): Don't call debuginfod_find_source when build_id is NULL.
2022-10-21readelf: support zstd compressed debug sections [PR 29640]Fangrui Song3-48/+80
2022-10-21Add a note to the binutils/NEWS file about DCO signed contributions.Nick Clifton1-0/+2
2022-10-20binutils: Remove unused substitution PROGRAMTsukasa OI2-4/+2
Unlike other substitution, this substitution of @PROGRAM@ was done in binutils/Makefile and it was intended for binutils/cxxfilt.man. @PROGRAM@ in binutils/cxxfilt.man is removed in the commit 0285c67df190 ("Automate generate on man pages") in 2001 and @PROGRAM@ is ineffective since then. Because PROGRAM substitution does nothing, removing this manual substitution should be completely safe. binutils/ChangeLog: * doc/local.mk: Remove unused substitution PROGRAM. * Makefile.in: Regenerate.
2022-10-19Fix addr2line test for ppc64 elfv1 and mingwAlan Modra1-27/+39
* testsuite/binutils-all/addr2line.exp: Tidy. For powerpc64 arrange to pass --synthetic to nm, and extract .main and .fn symbol address for addr2line test. Handle default executable extension on cygwin/mingw compilers.
2022-10-19Update MAINTAINERS file with details about accepting DCO signed contributions.Nick Clifton2-1/+34
* MAINTAINERS: Add section on patches, copyright and DCO.
2022-10-19Binutils: Adding new testcase for addr2line.rupesh potharla2-0/+67
* binutils/testsuite/config/default.exp: Set ADDR2LINE and ADDR2LINEFLAGS. * binutils/testsuite/binutils-all/addr2line.exp: New file.
2022-10-14e200 LSP supportAlan Modra1-4/+5
It has bothered me for a long time that we have disabled LSP (and SPE) tests. Also the LSP test comment indicating there is something wrong with get_powerpc_dialect. I don't think there is. Decoding of a VLE instruction depends on whether the processor is in VLE mode (some processors support both VLE and standard PPC) which we flag per section with SHF_PPC_VLE for decoding when disassembling. Background: Some versions of powerpc e200 have "Lightweight Signal Processing" support, examples being e200z215 and e200z425. As far as I can tell, LSP and SPE are mutually exclusive. This seems to be borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw" have the same encoding. So none of the processor descriptions in ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we want disassembly to work. I also could not find anything to suggest that the LSP insns are enabled only in VLE mode, which means the LSP insns should not be in vle_opcodes. Fix all this by moving the LSP insns to their own table, and add a new e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from -mvle. (Yes, I know, as I said above some of the e200z4 processors have LSP. Others have SPE. It's hard to choose good options. Think of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow adding the LSP insn set. include/ * opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare. (LSP_OP_TO_SEG): Define. binutils/ * doc/binutils.texi: Update ppc docs. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash. * doc/c-ppc.texi: Document e200 and lsp. * testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2. * testsuite/gas/ppc/lsp.d: Likewise, disassembly too. * testsuite/gas/ppc/ppc.exp: Don't xfail lsp test. opcodes/ * ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set PPC_OPCODE_LSP for e200z4 or vle. (ppc_parse_cpu): Mutually exclude LSP and SPE. (LSP_OPCD_SEGS): Define. (lsp_opcd_indices): New array. (disassemble_init_powerpc): Init lsp_opcd_indices. (lookup_lsp): New function. (print_insn_powerpc): Call it. * ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout. (vle_opcodes): Move LSP opcodes to.. (lsp_opcodes): ..here, and sort. (lsp_num_opcodes): New.
2022-10-12Fix objcopy's error message when it cannot add a .gnu_debuglink section ↵Nick Clifton2-1/+7
because the section already exists. PR 29665 * objcopy.c (copy_object): Use the input filename when reporting that a .gnu_debuglink section already exists.
2022-10-10Add ability to create reproducible source tarballs.Nick Clifton1-0/+4
* src-release.sh: Add "-r <date>" option to create reproducible tarballs based upon a fixed timestamp of <date>. * binutils/README-how-to-make-a-release: Add a line showing how to use -r <date> when creating a binutils release.
2022-10-05PR29647, objdump -S loopingAlan Modra1-2/+3
Fuzzed input with this in .debug_line [0x0000003b] Special opcode 115: advance Address by 8 to 0x401180 and Line by -2 to -1 PR 29647 * objdump.c (print_line): Don't decrement line number here.. (dump_lines): ..do so here instead, ensuring loop terminates.
2022-10-03readelf: DO not load section headers from file offset zeroNick Clifton2-0/+19
* readelf.c (get_32bit_section_headers): Return false if the e_shoff field is zero. (get_64bit_section_headers): Likewise.
2022-10-03RISC-V: Assign DWARF numbers to vector registersTsukasa OI1-10/+18
This commit assigns DWARF register numbers to vector registers (v0-v31: 96..127) to implement RISC-V DWARF Specification version 1.0-rc4 (now in the frozen state): https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/tag/v1.0-rc4 binutils/ChangeLog: * dwarf.c (dwarf_regnames_riscv): Assign DWARF register numbers 96..127 to vector registers v0-v31. gas/ChangeLog: * config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Support vector registers. * testsuite/gas/riscv/dw-regnums.s: Add vector registers to the DWARF register number test. * testsuite/gas/riscv/dw-regnums.d: Likewise.
2022-09-30objcopy: avoid "shadowing" of remove() function nameJan Beulich1-4/+4
remove() is a standard library function (declared in stdio.h), which triggers a "shadows a global declaration" warning with some gcc versions.
2022-09-30LoongArch: Update ELF e_flags handling according to specification.liuzhensong1-5/+5
Update handling of e_flags according to the documentation update [1] (discussions [2][3]). Object file bitness is now represented in the EI_CLASS byte. The e_flags field is now interpreted as follows: e_flags[2:0]: Base ABI modifier - 0x1: soft-float - 0x2: single-precision hard-float - 0x3: double-precision hard-float e_flags[7:6]: ELF object ABI version - 0x0: v0 - 0x1: v1 [1]: https://github.com/loongson/LoongArch-Documentation/blob/main/docs/LoongArch-ELF-ABI-EN.adoc#e_flags-identifies-abi-type-and-version [2]: https://github.com/loongson/LoongArch-Documentation/pull/61 [3]: https://github.com/loongson/LoongArch-Documentation/pull/47
2022-09-28The help document of size misses an option.Nick Clifton3-2/+19
PR 29628 * size.c (usage): Add -f. * doc/binutils.texi (size): Add -f.
2022-09-28Re: egrep in binutilsAlan Modra1-5/+1
Multi-line patterns for grep are not supported on some old versions of grep. binutils/ * embedspu.sh: Replace multi-line grep with sed. ld/ * testsuite/ld-elfvers/vers.exp: Replace multi-line grep with sed.
2022-09-28egrep in binutilsAlan Modra2-5/+7
Apparently some distros have a nagging egrep that helpfully tells you egrep is deprecated and to use "grep -E". The nag message causes a ld testsuite failure. What's more the advice isn't that good. The "-E" flag may not be available with older versions of grep. This patch fixes bare invocation of egrep within binutils, replacing it with the autoconf $EGREP or with grep. config/ * lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and invoke $EGREP. (AC_LIB_PROG_LD): Likewise. binutils/ * configure: Regenerate. * embedspu.sh: Replace egrep with grep. gold/ * testsuite/Makefile.am (flagstest_compress_debug_sections.check): Replace egrep with grep. * testsuite/Makefile.in: Regenerate. * testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP. * testsuite/bnd_ifunc_2.sh: Likewise. * testsuite/bnd_plt_1.sh: Likewise. * testsuite/discard_locals_test.sh: Likewise. * testsuite/gnu_property_test.sh: Likewise. * testsuite/no_version_test.sh: Likewise. * testsuite/pr18689.sh: Likewise. * testsuite/pr26936.sh: Likewise. * testsuite/retain.sh: Likewise. * testsuite/split_i386.sh: Likewise. * testsuite/split_s390.sh: Likewise. * testsuite/split_x32.sh: Likewise. * testsuite/split_x86_64.sh: Likewise. * testsuite/ver_test_pr16504.sh: Likewise. intl/ * configure: Regenerate. ld/ * testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song9-16/+217
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2022-09-26binutils/testsuite: handle the different install names of c++filtClément Chigot1-1/+4
c++filt is always named cxxfilt in a build directory, but in a install directory it would be named either cxxfilt or c++filt (depending on the host). Handle this last case in testsuite. binutils/ChangeLog: * testsuite/config/default.exp (CXXFILE): if cxxfilt not found, try c++filt.
2022-09-26binutils/testsuite: skip gentestdlls related tests if missingClément Chigot1-0/+6
When launching the testsuite through runtest outside the build tree, gentestdlls might not be available, this binary being created by make check. Simply untested the related tests instead of crashing. binutils/ChangeLog: * testsuite/binutils-all/objdump.exp: Skip dotnet tests if gentestdlls is not available.
2022-09-26PKG_CHECK_MODULES for msgpack and janssonAlan Modra2-24/+12
Using AS_IF rather than shell "if" is recommended for conditionals that contain non-trivial autoconf macros, because autoconf will emit any AC_REQUIREd autoconf macro expansions outside of the conditional. This makes them available elsewhere in the configure script. binutils/ * configure.ac (msgpack): Use "AS_IF" rather than "if". * configure: Regenerate. ld/ * configure.ac (jansson): Use "AS_IF" rather than "if". * configure: Regenerate.
2022-09-21RISC-V: Implement Ztso extensionShihua1-0/+3
This patch support ZTSO extension. It will turn on the tso flag for elf_flags once we have enabled Ztso extension. This is intended to implement v0.1 of the proposed specification which can be found in Chapter 25 of, https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf. bfd\ChangeLog: * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Set TSO flag. * elfxx-riscv.c: Add Ztso's arch. binutils\ChangeLog: * readelf.c (get_machine_flags): Set TSO flag. gas\ChangeLog: * config/tc-riscv.c (riscv_set_tso): Ditto. (riscv_set_arch): Ditto. * testsuite/gas/riscv/ztso.d: New test. include\ChangeLog: * elf/riscv.h (EF_RISCV_TSO): Ditto.
2022-09-20Stop strip from complaining about empty note sections when stripping a ↵Nick Clifton2-5/+8
binary for a second time. * objcopy.c (copy_object): Do not issue a warning message when encountering empty .gnu.build.attribute sections.
2022-09-20New Serbian translations for various binutils sub-directories.Nick Clifton1-1965/+2233
2022-09-20Bug 29580 - typo in warning message: .note.gnu.build-id data size is too bugZeke Lu1-1/+1
2022-09-15bfd, binutils, gas: Remove/mark unused variablesTsukasa OI1-3/+1
Clang generates a warning on unused (technically, written but not read thereafter) variables. By the default configuration (with "-Werror"), it causes a build failure (unless "--disable-werror" is specified). This commit adds ATTRIBUTE_UNUSED attribute to some of them, which means they are *possibly* unused (can be used but no warnings occur when unused) and removes others. bfd/ChangeLog: * elf32-lm32.c (lm32_elf_size_dynamic_sections): Mark unused rgot_count variable. * elf32-nds32.c (elf32_nds32_unify_relax_group): Remove unused count variable. * mmo.c (mmo_scan): Mark unused lineno variable. binutils/ChangeLog: * windmc.c (write_rc): Remove unused i variable. gas/ChangeLog: * config/tc-riscv.c (riscv_ip): Remove unused argnum variable. ld/ChangeLog: * pe-dll.c (generate_reloc): Remove unused bi and page_count variables.
2022-09-14Binutils: Readelf testcase failing with clangRupesh Potharla2-3/+9
* testsuite/binutils-all/readelf.exp (readelf_wi_test): Extend regexps to allow for output genreated by the Clang compiler.
2022-09-14bfd: Stop using -Wstack-usage=262144 when built with ClangTsukasa OI1-0/+18
Some components of GNU Binutils will pass "-Wstack-usage=262144" when "GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage", despite that related configuration part in bfd/warning.m4 handles the latest Clang (15.0.0 as of this writing) as "GCC >= 5.0". The option "-Wstack-usage" was ignored when the first version of Clang is released but even this "ignoring" behavior is removed before Clang 4.0.0. So, if we give Clang "-Wstack-usage=262144", it generates a warning, making the build failure. This commit checks "__clang__" macro to prevent adding the option if the compiler is identified as Clang. bfd/ChangeLog: * warning.m4: Stop appending "-Wstack-usage=262144" option when compiled with Clang. * configure: Regenerate. binutils/ChangeLog: * configure: Regenerate. gas/ChangeLog: * configure: Regenerate. gold/ChangeLog: * configure: Regenerate. gprof/ChangeLog: * configure: Regenerate. ld/ChangeLog: * configure: Regenerate. opcodes/ChangeLog: * configure: Regenerate.
2022-09-13objdump: '-S' should trigger search for separate debuginfo.Aaron Merey2-2/+10
Add with_source_code to the command line options that trigger might_need_separate_debug_info and dump_any_debugging. This helps 'objdump -S' download missing files via debuginfod without the need for specifying extra command line options like '-L'.
2022-09-12ppc: Document the -mfuture and -Mfuture options and make them usablePeter Bergner1-1/+1
The -mfuture and -Mfuture options which are used for adding potential new ISA instructions were not documented. They also lacked a bitmask so new instructions could not be enabled by those options. Fixed. binutils/ * doc/binutils.texi: Document -Mfuture. gas/ * config/tc-ppc.c: Document -mfuture * doc/c-ppc.texi: Likewise. include/ * opcode/ppc.h (PPC_OPCODE_FUTURE): Define. opcodes/ * ppc-dis.c (ppc_opts) <future>: Use it. * ppc-opc.c (FUTURE): Define.
2022-09-09Support debuginfo files with empty group sections.Nick Clifton2-3/+18
PR 29532 bfd * elf.c (setup_group): Do not return false if there is no group information available. bionutils* objcopy.c (setup_section): Leave group sections intact when creating separate debuginfo files.
2022-09-08i686-w64-mingw32-objdump -WL returns incorrect file pathsNick Clifton2-0/+13
PR 29523 * dwarf.c (display_debug_lines_decoded): Correctly handle DWARF-5 directory and filename tables.
2022-09-06Add debuginfod support for objdump -SAaron Merey2-41/+224
Currently objdump -S is not able to make use files downloaded from debuginfod. This is due to bfd_find_nearest_line_discriminator being unable to locate any separate debuginfo files in the debuginfod cache. Additionally objdump lacked a call to debuginfod_find_source in order to download missing source files. Fix this by using bfd_find_nearest_line_with_alt instead of bfd_find_nearest_line_discriminator. Also add a call to debuginfod_find_source in order to download missing source files. Co-authored-by: Nick Clifton <nickc@redhat.com>
2022-09-01dllwrap, windres and dlltools use mktemp, which should be avoidedNick Clifton4-6/+14
PR 29534 * dllwrap.c: Replace uses of choose_temp_base() with make_temp_file(). * dlltool.c: Likewise. * resrc.c: Likewise.
2022-08-23Add an option to dlltool to allow the creation of deterministic libraries.Nick Clifton4-38/+91
PR 29489 * dlltool.c (deterministic): New variable. (gen_lib_file): If deterministic is true set the BFD_DETERMINISTIC_OUTPUT flag. (usage): Mention --deterministic-libraries and --non-deterministic-libraries. (long_options): Add new options. (main): Parse new options. * doc/binutils.texi: Document the new options. * NEWS: Mention the new feature.
2022-08-23binutils: Updated my email address.Nelson Chu1-1/+1
binutils/ * MAINTAINERS (RISC-V): Updated my email address.
2022-08-22Fix compile time warning from Clang about error messages not being printed ↵Nick Clifton1-2/+2
safely.
2022-08-22Have readelf warn users if it is asked to decode a LLVM bitcode file or a ↵Nick Clifton2-9/+67
golang object file. * readelf.c (check_magic_number): New function. Checks the magic bytes at the start of a file. If they are not the ELF format magic values, then attempts to generate a helpful error message. (process_file_header): Call check_magic_number.
2022-08-16PR29362, some binutils memory leaksAlan Modra3-28/+43
2022-08-16 Alan Modra <amodra@gmail.com> Cunlong Li <shenxiaogll@163.com> PR 29362 * dwarf.c (free_debug_information): New function, extracted.. (free_debug_memory): ..from here. (process_debug_info): Use it when before clearing out unit debug_information. Clear all fields. * objcopy.c (delete_symbol_htabs): New function. (main): Call it via xatexit. (copy_archive): Free "dir". * objdump.c (free_debug_section): Free reloc_info.
2022-08-13readelf: print 0x0 as 0, and remove trailing spacesAlan Modra22-292/+292
This changes readelf output a little, removing the 0x prefix on hex output when the value is 0, except in cases where a fixed field width is shown. %#010x is not a good replacement for 0x%08x.
2022-08-13Make dwarf_vma uint64_tAlan Modra8-1302/+931
This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with uint64_t and int64_t everywhere. The patch also gets rid of DWARF_VMA_FMT since we can't use that with uint64_t, and all of the configure support for deciding the flavour of HOST_WIDEST_INT. dwarf_vmatoa also disappears, replacing most uses with one of PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values now use %z and %t rather than by casting to unsigned long. Also, most warning messages that used 0x%lx or similar now use %#lx and a few that didn't print the 0x hex prefix now also use %#. The patch doesn't change normal readelf output, except in odd cases where values previously might have been truncated.
2022-08-13Don't use bfd_vma in readelf.cAlan Modra1-221/+172
This replaces bfd_vma with uint64_t in readelf, defines BFD64 unconditionally, removes tests of BFD64 and sizeof (bfd_vma), and removes quite a few now unnecessary casts.
2022-08-13Don't use bfd_size_type in readelf.c and dwarf.cAlan Modra2-98/+89
Replacing bfd_size_type with dwarf_size_type or uint64_t is mostly cosmetic. The point of the change is to avoid use of a BFD type in readelf, where we'd like to keep as independent of BFD as possible. Also, the patch is a step towards using standard types.
2022-08-13Replace elf_vma with uint64_tAlan Modra3-110/+93
This patch replaces all uses of elf_vma with uint64_t, removes tests of sizeof (elf_vma), and does a little tidying of byte_get_little_endian and byte_get_big_endian.
2022-08-10objdump: fix extended (256) disassembler colorsAndrew Burgess1-1/+1
After commit: commit a88c79b77036e4778e70d62081c3cfd1044bb8e3 Date: Tue Aug 9 14:57:48 2022 +0100 Default to enabling colored disassembly if output is to a terminal. The 256 extended-color support for --disassembler-color was broken. This is fixed in this commit. PR 29457 * objdump (objdump_styled_sprintf): Check disassembler_color against an enum value, don't treat it as a bool.
2022-08-10bfd: Add support for LoongArch64 EFI (efi-*-loongarch64).Youling Tang3-0/+78
This adds support for efi-loongarch64 by virtue of adding a new PEI target pei-loongarch64. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based loongarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be "RVA truncated" error when using objcopy on loongarch64. With these changes the resulting file is recognized as an efi image. Any magic number is based on the Microsoft PE specification [1]. The test results are as follows: $ make check-binutils RUNTESTFLAGS='loongarch64.exp' PASS: Check if efi app format is recognized $ objdump -h -f tmpdir/loongarch64copy.o tmpdir/loongarch64copy.o: file format pei-loongarch64 architecture: Loongarch64, flags 0x00000132: EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED start address 0x0000000000000000 Sections: Idx Name Size VMA LMA File off Algn 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd: * .gitignore (pe-loongarch64igen.c): New. * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c, pe-loongarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64. * coff-loongarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common, _bfd_peLoongArch64_bfd_copy_private_section_data, _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out, _bfd_peLoongArch64_print_private_bfd_data_common, _bfd_peLoongArch64i_final_link_postscript, _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in, _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in, _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in, _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out, _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out, _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out, _bfd_peLoongArch64i_write_codeview_record, _bfd_peLoongArch64i_slurp_codeview_record, _bfd_peLoongArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peLoongArch64, * pei-loongarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peLoongArch64. (jtab): Add dummy entry that traps. * targets.c (loongarch64_pei_vec): New. binutils * testsuite/binutils-all/loongarch64/loongarch64.exp: New file. * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test. * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test. include * coff/loongarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New. Signed-off-by: Youling Tang <tangyouling@loongson.cn>
generated by cgit v1.1 at 2025-01-15 07:47:42 +0000