aboutsummaryrefslogtreecommitdiff
path: root/zlib/zlib.h
diff options
context:
space:
mode:
Diffstat (limited to 'zlib/zlib.h')
-rw-r--r--zlib/zlib.h221
1 files changed, 122 insertions, 99 deletions
diff --git a/zlib/zlib.h b/zlib/zlib.h
index 49dfcec..4a98e38 100644
--- a/zlib/zlib.h
+++ b/zlib/zlib.h
@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.11, January 15th, 2017
+ version 1.2.12, March 11th, 2022
- Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -37,11 +37,11 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.11"
-#define ZLIB_VERNUM 0x12b0
+#define ZLIB_VERSION "1.2.12"
+#define ZLIB_VERNUM 0x12c0
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 11
+#define ZLIB_VER_REVISION 12
#define ZLIB_VER_SUBREVISION 0
/*
@@ -543,8 +543,7 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
int strategy));
This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by the
- caller.
+ fields zalloc, zfree and opaque must be initialized before by the caller.
The method parameter is the compression method. It must be Z_DEFLATED in
this version of the library.
@@ -712,11 +711,12 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
used to switch between compression and straight copy of the input data, or
to switch to a different kind of input data requiring a different strategy.
If the compression approach (which is a function of the level) or the
- strategy is changed, and if any input has been consumed in a previous
- deflate() call, then the input available so far is compressed with the old
- level and strategy using deflate(strm, Z_BLOCK). There are three approaches
- for the compression levels 0, 1..3, and 4..9 respectively. The new level
- and strategy will take effect at the next call of deflate().
+ strategy is changed, and if there have been any deflate() calls since the
+ state was initialized or reset, then the input available so far is
+ compressed with the old level and strategy using deflate(strm, Z_BLOCK).
+ There are three approaches for the compression levels 0, 1..3, and 4..9
+ respectively. The new level and strategy will take effect at the next call
+ of deflate().
If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
not have enough output space to complete, then the parameter change will not
@@ -865,9 +865,11 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
detection, or add 16 to decode only the gzip format (the zlib format will
return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see
- below), inflate() will not automatically decode concatenated gzip streams.
- inflate() will return Z_STREAM_END at the end of the gzip stream. The state
- would need to be reset to continue decoding a subsequent gzip stream.
+ below), inflate() will *not* automatically decode concatenated gzip members.
+ inflate() will return Z_STREAM_END at the end of the gzip member. The state
+ would need to be reset to continue decoding a subsequent gzip member. This
+ *must* be done if there is more data after a gzip member, in order for the
+ decompression to be compliant with the gzip standard (RFC 1952).
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
@@ -1302,14 +1304,14 @@ typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
/*
ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
- Opens a gzip (.gz) file for reading or writing. The mode parameter is as
- in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
- a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
- compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
- for fixed code compression as in "wb9F". (See the description of
- deflateInit2 for more information about the strategy parameter.) 'T' will
- request transparent writing or appending with no compression and not using
- the gzip format.
+ Open the gzip (.gz) file at path for reading and decompressing, or
+ compressing and writing. The mode parameter is as in fopen ("rb" or "wb")
+ but can also include a compression level ("wb9") or a strategy: 'f' for
+ filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h",
+ 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression
+ as in "wb9F". (See the description of deflateInit2 for more information
+ about the strategy parameter.) 'T' will request transparent writing or
+ appending with no compression and not using the gzip format.
"a" can be used instead of "w" to request that the gzip stream that will
be written be appended to the file. "+" will result in an error, since
@@ -1339,9 +1341,9 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
/*
- gzdopen associates a gzFile with the file descriptor fd. File descriptors
- are obtained from calls like open, dup, creat, pipe or fileno (if the file
- has been previously opened with fopen). The mode parameter is as in gzopen.
+ Associate a gzFile with the file descriptor fd. File descriptors are
+ obtained from calls like open, dup, creat, pipe or fileno (if the file has
+ been previously opened with fopen). The mode parameter is as in gzopen.
The next call of gzclose on the returned gzFile will also close the file
descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
@@ -1362,13 +1364,13 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
/*
- Set the internal buffer size used by this library's functions. The
- default buffer size is 8192 bytes. This function must be called after
- gzopen() or gzdopen(), and before any other calls that read or write the
- file. The buffer memory allocation is always deferred to the first read or
- write. Three times that size in buffer space is allocated. A larger buffer
- size of, for example, 64K or 128K bytes will noticeably increase the speed
- of decompression (reading).
+ Set the internal buffer size used by this library's functions for file to
+ size. The default buffer size is 8192 bytes. This function must be called
+ after gzopen() or gzdopen(), and before any other calls that read or write
+ the file. The buffer memory allocation is always deferred to the first read
+ or write. Three times that size in buffer space is allocated. A larger
+ buffer size of, for example, 64K or 128K bytes will noticeably increase the
+ speed of decompression (reading).
The new buffer size also affects the maximum length for gzprintf().
@@ -1378,9 +1380,9 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
/*
- Dynamically update the compression level or strategy. See the description
- of deflateInit2 for the meaning of these parameters. Previously provided
- data is flushed before the parameter change.
+ Dynamically update the compression level and strategy for file. See the
+ description of deflateInit2 for the meaning of these parameters. Previously
+ provided data is flushed before applying the parameter changes.
gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
opened for writing, Z_ERRNO if there is an error writing the flushed data,
@@ -1389,7 +1391,7 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
/*
- Reads the given number of uncompressed bytes from the compressed file. If
+ Read and decompress up to len uncompressed bytes from file into buf. If
the input file is not in gzip format, gzread copies the given number of
bytes into the buffer directly from the file.
@@ -1420,11 +1422,11 @@ ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
gzFile file));
/*
- Read up to nitems items of size size from file to buf, otherwise operating
- as gzread() does. This duplicates the interface of stdio's fread(), with
- size_t request and return types. If the library defines size_t, then
- z_size_t is identical to size_t. If not, then z_size_t is an unsigned
- integer type that can contain a pointer.
+ Read and decompress up to nitems items of size size from file into buf,
+ otherwise operating as gzread() does. This duplicates the interface of
+ stdio's fread(), with size_t request and return types. If the library
+ defines size_t, then z_size_t is identical to size_t. If not, then z_size_t
+ is an unsigned integer type that can contain a pointer.
gzfread() returns the number of full items read of size size, or zero if
the end of the file was reached and a full item could not be read, or if
@@ -1443,18 +1445,16 @@ ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
file, reseting and retrying on end-of-file, when size is not 1.
*/
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
- voidpc buf, unsigned len));
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file, voidpc buf, unsigned len));
/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes written or 0 in case of
- error.
+ Compress and write the len uncompressed bytes at buf to file. gzwrite
+ returns the number of uncompressed bytes written or 0 in case of error.
*/
ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
z_size_t nitems, gzFile file));
/*
- gzfwrite() writes nitems items of size size from buf to file, duplicating
+ Compress and write nitems items of size size from buf to file, duplicating
the interface of stdio's fwrite(), with size_t request and return types. If
the library defines size_t, then z_size_t is identical to size_t. If not,
then z_size_t is an unsigned integer type that can contain a pointer.
@@ -1467,22 +1467,22 @@ ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
/*
- Converts, formats, and writes the arguments to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
+ Convert, format, compress, and write the arguments (...) to file under
+ control of the string format, as in fprintf. gzprintf returns the number of
uncompressed bytes actually written, or a negative zlib error code in case
of error. The number of uncompressed bytes written is limited to 8191, or
one less than the buffer size given to gzbuffer(). The caller should assure
that this limit is not exceeded. If it is exceeded, then gzprintf() will
return an error (0) with nothing written. In this case, there may also be a
buffer overflow with unpredictable consequences, which is possible only if
- zlib was compiled with the insecure functions sprintf() or vsprintf()
+ zlib was compiled with the insecure functions sprintf() or vsprintf(),
because the secure snprintf() or vsnprintf() functions were not available.
This can be determined using zlibCompileFlags().
*/
ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
/*
- Writes the given null-terminated string to the compressed file, excluding
+ Compress and write the given null-terminated string s to file, excluding
the terminating null character.
gzputs returns the number of characters written, or -1 in case of error.
@@ -1490,11 +1490,12 @@ ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
/*
- Reads bytes from the compressed file until len-1 characters are read, or a
- newline character is read and transferred to buf, or an end-of-file
- condition is encountered. If any characters are read or if len == 1, the
- string is terminated with a null character. If no characters are read due
- to an end-of-file or len < 1, then the buffer is left untouched.
+ Read and decompress bytes from file into buf, until len-1 characters are
+ read, or until a newline character is read and transferred to buf, or an
+ end-of-file condition is encountered. If any characters are read or if len
+ is one, the string is terminated with a null character. If no characters
+ are read due to an end-of-file or len is less than one, then the buffer is
+ left untouched.
gzgets returns buf which is a null-terminated string, or it returns NULL
for end-of-file or in case of error. If there was an error, the contents at
@@ -1503,13 +1504,13 @@ ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
/*
- Writes c, converted to an unsigned char, into the compressed file. gzputc
+ Compress and write c, converted to an unsigned char, into file. gzputc
returns the value that was written, or -1 in case of error.
*/
ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
/*
- Reads one byte from the compressed file. gzgetc returns this byte or -1
+ Read and decompress one byte from file. gzgetc returns this byte or -1
in case of end of file or error. This is implemented as a macro for speed.
As such, it does not do all of the checking the other functions do. I.e.
it does not check to see if file is NULL, nor whether the structure file
@@ -1518,8 +1519,8 @@ ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
/*
- Push one character back onto the stream to be read as the first character
- on the next read. At least one character of push-back is allowed.
+ Push c back onto the stream for file to be read as the first character on
+ the next read. At least one character of push-back is always allowed.
gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
fail if c is -1, and may fail if a character has been pushed but not read
yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
@@ -1530,9 +1531,9 @@ ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
/*
- Flushes all pending output into the compressed file. The parameter flush
- is as in the deflate() function. The return value is the zlib error number
- (see function gzerror below). gzflush is only permitted when writing.
+ Flush all pending output to file. The parameter flush is as in the
+ deflate() function. The return value is the zlib error number (see function
+ gzerror below). gzflush is only permitted when writing.
If the flush parameter is Z_FINISH, the remaining data is written and the
gzip stream is completed in the output. If gzwrite() is called again, a new
@@ -1547,8 +1548,8 @@ ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
z_off_t offset, int whence));
- Sets the starting position for the next gzread or gzwrite on the given
- compressed file. The offset represents a number of bytes in the
+ Set the starting position to offset relative to whence for the next gzread
+ or gzwrite on file. The offset represents a number of bytes in the
uncompressed data stream. The whence parameter is defined as in lseek(2);
the value SEEK_END is not supported.
@@ -1565,18 +1566,18 @@ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
/*
- Rewinds the given file. This function is supported only for reading.
+ Rewind file. This function is supported only for reading.
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET).
*/
/*
ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
- Returns the starting position for the next gzread or gzwrite on the given
- compressed file. This position represents a number of bytes in the
- uncompressed data stream, and is zero when starting, even if appending or
- reading a gzip stream from the middle of a file using gzdopen().
+ Return the starting position for the next gzread or gzwrite on file.
+ This position represents a number of bytes in the uncompressed data stream,
+ and is zero when starting, even if appending or reading a gzip stream from
+ the middle of a file using gzdopen().
gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
*/
@@ -1584,22 +1585,22 @@ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
/*
ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
- Returns the current offset in the file being read or written. This offset
- includes the count of bytes that precede the gzip stream, for example when
- appending or when using gzdopen() for reading. When reading, the offset
- does not include as yet unused buffered input. This information can be used
- for a progress indicator. On error, gzoffset() returns -1.
+ Return the current compressed (actual) read or write offset of file. This
+ offset includes the count of bytes that precede the gzip stream, for example
+ when appending or when using gzdopen() for reading. When reading, the
+ offset does not include as yet unused buffered input. This information can
+ be used for a progress indicator. On error, gzoffset() returns -1.
*/
ZEXTERN int ZEXPORT gzeof OF((gzFile file));
/*
- Returns true (1) if the end-of-file indicator has been set while reading,
- false (0) otherwise. Note that the end-of-file indicator is set only if the
- read tried to go past the end of the input, but came up short. Therefore,
- just like feof(), gzeof() may return false even if there is no more data to
- read, in the event that the last read request was for the exact number of
- bytes remaining in the input file. This will happen if the input file size
- is an exact multiple of the buffer size.
+ Return true (1) if the end-of-file indicator for file has been set while
+ reading, false (0) otherwise. Note that the end-of-file indicator is set
+ only if the read tried to go past the end of the input, but came up short.
+ Therefore, just like feof(), gzeof() may return false even if there is no
+ more data to read, in the event that the last read request was for the exact
+ number of bytes remaining in the input file. This will happen if the input
+ file size is an exact multiple of the buffer size.
If gzeof() returns true, then the read functions will return no more data,
unless the end-of-file indicator is reset by gzclearerr() and the input file
@@ -1608,7 +1609,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
- Returns true (1) if file is being copied directly while reading, or false
+ Return true (1) if file is being copied directly while reading, or false
(0) if file is a gzip stream being decompressed.
If the input file is empty, gzdirect() will return true, since the input
@@ -1629,8 +1630,8 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
/*
- Flushes all pending output if necessary, closes the compressed file and
- deallocates the (de)compression state. Note that once file is closed, you
+ Flush all pending output for file, if necessary, close file and
+ deallocate the (de)compression state. Note that once file is closed, you
cannot call gzerror with file, since its structures have been deallocated.
gzclose must not be called more than once on the same file, just as free
must not be called more than once on the same allocation.
@@ -1654,10 +1655,10 @@ ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
/*
- Returns the error message for the last error which occurred on the given
- compressed file. errnum is set to zlib error number. If an error occurred
- in the file system and not in the compression library, errnum is set to
- Z_ERRNO and the application may consult errno to get the exact error code.
+ Return the error message for the last error which occurred on file.
+ errnum is set to zlib error number. If an error occurred in the file system
+ and not in the compression library, errnum is set to Z_ERRNO and the
+ application may consult errno to get the exact error code.
The application must not modify the returned string. Future calls to
this function may invalidate the previously returned string. If file is
@@ -1670,7 +1671,7 @@ ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
/*
- Clears the error and end-of-file flags for file. This is analogous to the
+ Clear the error and end-of-file flags for file. This is analogous to the
clearerr() function in stdio. This is useful for continuing to read a gzip
file that is being written concurrently.
*/
@@ -1688,8 +1689,9 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
/*
Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is Z_NULL, this function returns the
- required initial value for the checksum.
+ return the updated checksum. An Adler-32 value is in the range of a 32-bit
+ unsigned integer. If buf is Z_NULL, this function returns the required
+ initial value for the checksum.
An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
much faster.
@@ -1722,12 +1724,13 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
negative, the result has no meaning or utility.
*/
-ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
Update a running CRC-32 with the bytes buf[0..len-1] and return the
- updated CRC-32. If buf is Z_NULL, this function returns the required
- initial value for the crc. Pre- and post-conditioning (one's complement) is
- performed within this function so it shouldn't be done by the application.
+ updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer.
+ If buf is Z_NULL, this function returns the required initial value for the
+ crc. Pre- and post-conditioning (one's complement) is performed within this
+ function so it shouldn't be done by the application.
Usage example:
@@ -1739,7 +1742,7 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
if (crc != original_crc) error();
*/
-ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong crc, const Bytef *buf,
z_size_t len));
/*
Same as crc32(), but with a size_t length.
@@ -1755,6 +1758,20 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
len2.
*/
+/*
+ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t len2));
+
+ Return the operator corresponding to length len2, to be used with
+ crc32_combine_op().
+*/
+
+ZEXTERN uLong ZEXPORT crc32_combine_op OF((uLong crc1, uLong crc2, uLong op));
+/*
+ Give the same result as crc32_combine(), using op in place of len2. op is
+ is generated from len2 by crc32_combine_gen(). This will be faster than
+ crc32_combine() if the generated op is used more than once.
+*/
+
/* various hacks, don't look :) */
@@ -1842,6 +1859,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off64_t));
#endif
#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
@@ -1852,6 +1870,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
# define z_gzoffset z_gzoffset64
# define z_adler32_combine z_adler32_combine64
# define z_crc32_combine z_crc32_combine64
+# define z_crc32_combine_gen z_crc32_combine_gen64
# else
# define gzopen gzopen64
# define gzseek gzseek64
@@ -1859,6 +1878,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
+# define crc32_combine_gen crc32_combine_gen64
# endif
# ifndef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
@@ -1867,6 +1887,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
# endif
#else
ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
@@ -1875,12 +1896,14 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
#endif
#else /* Z_SOLO */
ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
#endif /* !Z_SOLO */