aboutsummaryrefslogtreecommitdiff
path: root/gdb/xm-symmetry.h
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/xm-symmetry.h')
-rw-r--r--gdb/xm-symmetry.h245
1 files changed, 0 insertions, 245 deletions
diff --git a/gdb/xm-symmetry.h b/gdb/xm-symmetry.h
deleted file mode 100644
index a18340a..0000000
--- a/gdb/xm-symmetry.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/* Definitions to make GDB run on a Sequent Symmetry under dynix 3.0,
- with Weitek 1167 and i387 support.
- Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Symmetry version by Jay Vosburgh (uunet!sequent!fubar) */
-
-/* This machine doesn't have the siginterrupt call. */
-#define NO_SIGINTERRUPT
-
-#define HAVE_WAIT_STRUCT
-
-/* XPT_DEBUG doesn't work yet under Dynix 3.0.12, but UNDEBUG does... */
-/* #define PTRACE_ATTACH XPT_DEBUG
-#define PTRACE_DETACH XPT_UNDEBUG
-#define ATTACH_DETACH */
-
-#define HOST_BYTE_ORDER LITTLE_ENDIAN
-
-/* Get rid of any system-imposed stack limit if possible. */
-
-#define SET_STACK_LIMIT_HUGE
-
-/* This is the amount to subtract from u.u_ar0
- to get the offset in the core file of the register values. */
-
-#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG))
-
-/* The magic numbers below are offsets into u_ar0 in the user struct.
- They live in <machine/reg.h>. Gdb calls this macro with blockend
- holding u.u_ar0 - KERNEL_U_ADDR. Only the registers listed are
- saved in the u area (along with a few others that aren't useful
- here. See <machine/reg.h>). */
-
-#define REGISTER_U_ADDR(addr, blockend, regno) \
-{ struct user foo; /* needed for finding fpu regs */ \
-switch (regno) { \
- case 0: \
- addr = blockend + EAX * sizeof(int); break; \
- case 1: \
- addr = blockend + EDX * sizeof(int); break; \
- case 2: \
- addr = blockend + ECX * sizeof(int); break; \
- case 3: /* st(0) */ \
- addr = blockend - \
- ((int)&foo.u_fpusave.fpu_stack[0][0] - (int)&foo); \
- break; \
- case 4: /* st(1) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[1][0] - (int)&foo); \
- break; \
- case 5: \
- addr = blockend + EBX * sizeof(int); break; \
- case 6: \
- addr = blockend + ESI * sizeof(int); break; \
- case 7: \
- addr = blockend + EDI * sizeof(int); break; \
- case 8: /* st(2) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[2][0] - (int)&foo); \
- break; \
- case 9: /* st(3) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[3][0] - (int)&foo); \
- break; \
- case 10: /* st(4) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[4][0] - (int)&foo); \
- break; \
- case 11: /* st(5) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[5][0] - (int)&foo); \
- break; \
- case 12: /* st(6) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[6][0] - (int)&foo); \
- break; \
- case 13: /* st(7) */ \
- addr = blockend - \
- ((int) &foo.u_fpusave.fpu_stack[7][0] - (int)&foo); \
- break; \
- case 14: \
- addr = blockend + ESP * sizeof(int); break; \
- case 15: \
- addr = blockend + EBP * sizeof(int); break; \
- case 16: \
- addr = blockend + EIP * sizeof(int); break; \
- case 17: \
- addr = blockend + FLAGS * sizeof(int); break; \
- case 18: /* fp1 */ \
- case 19: /* fp2 */ \
- case 20: /* fp3 */ \
- case 21: /* fp4 */ \
- case 22: /* fp5 */ \
- case 23: /* fp6 */ \
- case 24: /* fp7 */ \
- case 25: /* fp8 */ \
- case 26: /* fp9 */ \
- case 27: /* fp10 */ \
- case 28: /* fp11 */ \
- case 29: /* fp12 */ \
- case 30: /* fp13 */ \
- case 31: /* fp14 */ \
- case 32: /* fp15 */ \
- case 33: /* fp16 */ \
- case 34: /* fp17 */ \
- case 35: /* fp18 */ \
- case 36: /* fp19 */ \
- case 37: /* fp20 */ \
- case 38: /* fp21 */ \
- case 39: /* fp22 */ \
- case 40: /* fp23 */ \
- case 41: /* fp24 */ \
- case 42: /* fp25 */ \
- case 43: /* fp26 */ \
- case 44: /* fp27 */ \
- case 45: /* fp28 */ \
- case 46: /* fp29 */ \
- case 47: /* fp30 */ \
- case 48: /* fp31 */ \
- addr = blockend - \
- ((int) &foo.u_fpasave.fpa_regs[(regno)-18] - (int)&foo); \
- } \
-}
-
-/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */
-
-#define FETCH_INFERIOR_REGISTERS
-
-/* We must fetch all the regs before storing, since we store all at once. */
-
-#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
-
-/* Interface definitions for kernel debugger KDB. */
-/* This doesn't work... */
-/* Map machine fault codes into signal numbers.
- First subtract 0, divide by 4, then index in a table.
- Faults for which the entry in this table is 0
- are not handled by KDB; the program's own trap handler
- gets to handle then. */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE \
-{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
- 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
- 0, 0, 0, 0, 0, 0, 0, 0}
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm (".globl end"); \
- asm ("movl $ end, %esp"); \
- asm ("movl %ebp, $0"); }
-
-/* Push the frame pointer register on the stack. */
-#define PUSH_FRAME_PTR \
- asm ("pushl %ebp");
-
-/* Copy the top-of-stack to the frame pointer register. */
-#define POP_FRAME_PTR \
- asm ("movl (%esp), %ebp");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm("pushad"); }
-/*
-{ asm("pushl %eax"); \
- asm("pushl %edx"); \
- asm("pushl %ecx"); \
- asm("pushl %st(0)"); \
- asm("pushl %st(1)"); \
- asm("pushl %ebx"); \
- asm("pushl %esi"); \
- asm("pushl %edi"); \
- asm("pushl %st(2)"); \
- asm("pushl %st(3)"); \
- asm("pushl %st(4)"); \
- asm("pushl %st(5)"); \
- asm("pushl %st(6)"); \
- asm("pushl %st(7)"); \
- asm("pushl %esp"); \
- asm("pushl %ebp"); \
- asm("pushl %eip"); \
- asm("pushl %eflags"); \
- asm("pushl %fp1"); \
- asm("pushl %fp2"); \
- asm("pushl %fp3"); \
- asm("pushl %fp4"); \
- asm("pushl %fp5"); \
- asm("pushl %fp6"); \
- asm("pushl %fp7"); \
- asm("pushl %fp8"); \
- asm("pushl %fp9"); \
- asm("pushl %fp10"); \
- asm("pushl %fp11"); \
- asm("pushl %fp12"); \
- asm("pushl %fp13"); \
- asm("pushl %fp14"); \
- asm("pushl %fp15"); \
- asm("pushl %fp16"); \
- asm("pushl %fp17"); \
- asm("pushl %fp18"); \
- asm("pushl %fp19"); \
- asm("pushl %fp20"); \
- asm("pushl %fp21"); \
- asm("pushl %fp22"); \
- asm("pushl %fp23"); \
- asm("pushl %fp24"); \
- asm("pushl %fp25"); \
- asm("pushl %fp26"); \
- asm("pushl %fp27"); \
- asm("pushl %fp28"); \
- asm("pushl %fp29"); \
- asm("pushl %fp30"); \
- asm("pushl %fp31"); \
-}
-*/
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
-
-#define POP_REGISTERS \
-{ asm ("popad"); }
generated by cgit v1.1 at 2025-03-22 18:16:26 +0000