aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--sim/aarch64/ChangeLog4
-rwxr-xr-xsim/aarch64/configure34
-rw-r--r--sim/arm/ChangeLog5
-rwxr-xr-xsim/arm/configure34
-rw-r--r--sim/arm/wrapper.c2
-rw-r--r--sim/avr/ChangeLog6
-rwxr-xr-xsim/avr/configure36
-rw-r--r--sim/avr/configure.ac2
-rw-r--r--sim/bfin/ChangeLog6
-rwxr-xr-xsim/bfin/configure36
-rw-r--r--sim/bfin/configure.ac2
-rw-r--r--sim/common/ChangeLog41
-rw-r--r--sim/common/acinclude.m434
-rw-r--r--sim/common/cgen-ops.h10
-rw-r--r--sim/common/nrun.c2
-rw-r--r--sim/common/sim-config.c44
-rw-r--r--sim/common/sim-config.h190
-rw-r--r--sim/common/sim-endian.c8
-rw-r--r--sim/common/sim-events.c12
-rw-r--r--sim/common/sim-events.h6
-rw-r--r--sim/common/sim-n-core.h4
-rw-r--r--sim/common/sim-n-endian.h10
-rw-r--r--sim/common/sim-options.c8
-rw-r--r--sim/cr16/ChangeLog6
-rwxr-xr-xsim/cr16/configure36
-rw-r--r--sim/cr16/configure.ac2
-rw-r--r--sim/cris/ChangeLog7
-rw-r--r--sim/cris/arch.h2
-rwxr-xr-xsim/cris/configure36
-rw-r--r--sim/cris/configure.ac2
-rw-r--r--sim/d10v/ChangeLog4
-rwxr-xr-xsim/d10v/configure34
-rw-r--r--sim/erc32/ChangeLog4
-rwxr-xr-xsim/erc32/configure12
-rw-r--r--sim/frv/ChangeLog9
-rw-r--r--sim/frv/arch.h2
-rwxr-xr-xsim/frv/configure36
-rw-r--r--sim/frv/configure.ac2
-rw-r--r--sim/frv/frv.c4
-rw-r--r--sim/ft32/ChangeLog6
-rwxr-xr-xsim/ft32/configure36
-rw-r--r--sim/ft32/configure.ac2
-rw-r--r--sim/h8300/ChangeLog5
-rwxr-xr-xsim/h8300/configure24
-rw-r--r--sim/h8300/configure.ac2
-rw-r--r--sim/iq2000/ChangeLog6
-rw-r--r--sim/iq2000/arch.h2
-rwxr-xr-xsim/iq2000/configure36
-rw-r--r--sim/iq2000/configure.ac2
-rw-r--r--sim/lm32/ChangeLog6
-rw-r--r--sim/lm32/arch.h2
-rwxr-xr-xsim/lm32/configure36
-rw-r--r--sim/lm32/configure.ac2
-rw-r--r--sim/m32r/ChangeLog9
-rw-r--r--sim/m32r/arch.h2
-rwxr-xr-xsim/m32r/configure36
-rw-r--r--sim/m32r/configure.ac2
-rw-r--r--sim/m32r/traps-linux.c4
-rw-r--r--sim/m68hc11/ChangeLog5
-rwxr-xr-xsim/m68hc11/configure36
-rw-r--r--sim/m68hc11/configure.ac2
-rw-r--r--sim/mcore/ChangeLog4
-rwxr-xr-xsim/mcore/configure34
-rw-r--r--sim/microblaze/ChangeLog4
-rwxr-xr-xsim/microblaze/configure34
-rw-r--r--sim/mips/ChangeLog7
-rwxr-xr-xsim/mips/configure52
-rw-r--r--sim/mips/configure.ac16
-rw-r--r--sim/mips/sim-main.h2
-rw-r--r--sim/mn10300/ChangeLog6
-rwxr-xr-xsim/mn10300/configure36
-rw-r--r--sim/mn10300/configure.ac2
-rw-r--r--sim/moxie/ChangeLog5
-rwxr-xr-xsim/moxie/configure36
-rw-r--r--sim/moxie/configure.ac2
-rw-r--r--sim/msp430/ChangeLog6
-rwxr-xr-xsim/msp430/configure24
-rw-r--r--sim/msp430/configure.ac2
-rw-r--r--sim/sh/ChangeLog7
-rwxr-xr-xsim/sh/configure34
-rw-r--r--sim/sh/interp.c4
-rw-r--r--sim/sh64/ChangeLog6
-rw-r--r--sim/sh64/arch.h2
-rwxr-xr-xsim/sh64/configure36
-rw-r--r--sim/sh64/configure.ac2
-rw-r--r--sim/testsuite/ChangeLog5
-rw-r--r--sim/testsuite/common/bits-gen.c2
-rw-r--r--sim/v850/ChangeLog6
-rwxr-xr-xsim/v850/configure36
-rw-r--r--sim/v850/configure.ac2
90 files changed, 712 insertions, 699 deletions
diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog
index fbbf562..b16bb61 100644
--- a/sim/aarch64/ChangeLog
+++ b/sim/aarch64/ChangeLog
@@ -1,3 +1,7 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_dis_read): Change private_data to application_data.
diff --git a/sim/aarch64/configure b/sim/aarch64/configure
index d909324..219d770 100755
--- a/sim/aarch64/configure
+++ b/sim/aarch64/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13010,9 +13010,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13246,12 +13246,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog
index 024f52e..f6989e9 100644
--- a/sim/arm/ChangeLog
+++ b/sim/arm/ChangeLog
@@ -1,3 +1,8 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (sim_store_register): Rename to ...
diff --git a/sim/arm/configure b/sim/arm/configure
index d46ffcb..3fd5d8c 100755
--- a/sim/arm/configure
+++ b/sim/arm/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/arm/wrapper.c b/sim/arm/wrapper.c
index 81fb21f..3938f3c 100644
--- a/sim/arm/wrapper.c
+++ b/sim/arm/wrapper.c
@@ -140,7 +140,7 @@ init (void)
{
ARMul_EmulateInit ();
state = ARMul_NewState ();
- state->bigendSig = (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN ? HIGH : LOW);
+ state->bigendSig = (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? HIGH : LOW);
ARMul_MemoryInit (state, mem_size);
ARMul_OSInit (state);
state->verbose = 0;
diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog
index d0f63e5..5fcbea1 100644
--- a/sim/avr/ChangeLog
+++ b/sim/avr/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
diff --git a/sim/avr/configure b/sim/avr/configure
index fded283..001142f 100755
--- a/sim/avr/configure
+++ b/sim/avr/configure
@@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/avr/configure.ac b/sim/avr/configure.ac
index a487225..0857787 100644
--- a/sim/avr/configure.ac
+++ b/sim/avr/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_ENVIRONMENT
diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog
index cc1b3cc..6844035 100644
--- a/sim/bfin/ChangeLog
+++ b/sim/bfin/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
diff --git a/sim/bfin/configure b/sim/bfin/configure
index 8edee25..9b8dd5d 100755
--- a/sim/bfin/configure
+++ b/sim/bfin/configure
@@ -12935,31 +12935,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12969,10 +12969,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13029,9 +13029,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13265,12 +13265,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/bfin/configure.ac b/sim/bfin/configure.ac
index 31cd159..5ae3b81 100644
--- a/sim/bfin/configure.ac
+++ b/sim/bfin/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_DEFAULT_MODEL(bf537)
diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
index 65a0abf..6991786 100644
--- a/sim/common/ChangeLog
+++ b/sim/common/ChangeLog
@@ -1,5 +1,46 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * acinclude.m4 (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to
+ BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to
+ BFD_ENDIAN_UNKNOWN.
+ (SIM_AC_OPTION_HOSTENDIAN): Likewise.
+ * cgen-ops.h (SUBWORDXFSI): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
+ (SUBWORDTFSI, JOINSIDF, JOINSIXF, JOINSITF): Likewise.
+ * nrun.c (main): Likewise.
+ * sim-config.c (current_host_byte_order): Change type to enum
+ bfd_endian. Initialize to BFD_ENDIAN_UNKNOWN.
+ (current_target_byte_order): Likewise.
+ (config_byte_order_to_a): Likewise. Change BIG_ENDIAN to
+ BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to
+ BFD_ENDIAN_UNKNOWN.
+ (sim_config): Change prefered_target_byte_order type to enum
+ bfd_endian. Change BIG_ENDIAN to BFD_ENDIAN_BIG, LITTLE_ENDIAN
+ to BFD_ENDIAN_LITTLE, and 0 to BFD_ENDIAN_UNKNOWN.
+ * sim-config.h: Change BIG_ENDIAN to BFD_ENDIAN_BIG, LITTLE_ENDIAN
+ to BFD_ENDIAN_LITTLE, and 0 to BFD_ENDIAN_UNKNOWN.
+ Delete all the various arch/OS endian includes & defines.
+ (current_host_byte_order): Change type to enum bfd_endian.
+ (current_target_byte_order): Likewise.
+ (CURRENT_HOST_BYTE_ORDER): Compare to BFD_ENDIAN_UNKNOWN, not 0.
+ (CURRENT_TARGET_BYTE_ORDER): Likewise.
+ * sim-endian.c: Change LITTLE_ENDIAN to BFD_ENDIAN_LITTLE.
+ * sim-events.c (sim_events_watch_sim): Change BIG_ENDIAN to
+ BFD_ENDIAN_BIG, LITTLE_ENDIAN to BFD_ENDIAN_LITTLE, and 0 to
+ BFD_ENDIAN_UNKNOWN.
+ (sim_events_watch_core): Likewise.
+ * sim-events.h: Likewise.
+ * sim-n-core.h (sim_core_read_misaligned_N): Change BIG_ENDIAN to
+ BFD_ENDIAN_BIG.
+ (sim_core_write_misaligned_N): Likewise.
+ * sim-n-endian.h (endian_h2be_N): Likewise.
+ (endian_be2h_N): Likewise.
+ (endian_h2le_N): Change LITTLE_ENDIAN to BFD_ENDIAN_LITTLE.
+ (offset_N): Likewise.
+ * sim-options.c (standard_option_handler): Change LITTLE_ENDIAN to
+ BFD_ENDIAN_LITTLE and BIG_ENDIAN to BFD_ENDIAN_BIG.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* cgen-defs.h (current_state): Delete.
* sim-base.h (CURRENT_STATE_REG, CURRENT_STATE): Delete.
* sim-utils.c (current_state): Delete.
diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4
index ebb6d1b..2af6d5d 100644
--- a/sim/common/acinclude.m4
+++ b/sim/common/acinclude.m4
@@ -449,26 +449,26 @@ AC_ARG_ENABLE(sim-endian,
[AS_HELP_STRING([--enable-sim-endian=endian],
[Specify target byte endian orientation])],
[case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
@@ -477,10 +477,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
fi],
[if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -498,9 +498,9 @@ AC_ARG_ENABLE(sim-hostendian,
[AS_HELP_STRING([--enable-sim-hostendian=end],
[Specify host byte endian orientation])],
[case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -509,12 +509,12 @@ fi],[
if test "x$cross_compiling" = "xno"; then
AC_C_BIGENDIAN
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi])dnl
])
AC_SUBST(sim_hostendian)
diff --git a/sim/common/cgen-ops.h b/sim/common/cgen-ops.h
index 9256d8b..7ff1b4d 100644
--- a/sim/common/cgen-ops.h
+++ b/sim/common/cgen-ops.h
@@ -404,7 +404,7 @@ SUBWORDXFSI (XF in, int word)
/* Note: typedef struct { SI parts[3]; } XF; */
union { XF in; SI out[3]; } x;
x.in = in;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return x.out[word];
else
return x.out[2 - word];
@@ -416,7 +416,7 @@ SUBWORDTFSI (TF in, int word)
/* Note: typedef struct { SI parts[4]; } TF; */
union { TF in; SI out[4]; } x;
x.in = in;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return x.out[word];
else
return x.out[3 - word];
@@ -432,7 +432,7 @@ SEMOPS_INLINE DF
JOINSIDF (SI x0, SI x1)
{
union { SI in[2]; DF out; } x;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
x.in[0] = x0, x.in[1] = x1;
else
x.in[1] = x0, x.in[0] = x1;
@@ -443,7 +443,7 @@ SEMOPS_INLINE XF
JOINSIXF (SI x0, SI x1, SI x2)
{
union { SI in[3]; XF out; } x;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
x.in[0] = x0, x.in[1] = x1, x.in[2] = x2;
else
x.in[2] = x0, x.in[1] = x1, x.in[0] = x2;
@@ -454,7 +454,7 @@ SEMOPS_INLINE TF
JOINSITF (SI x0, SI x1, SI x2, SI x3)
{
union { SI in[4]; TF out; } x;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
x.in[0] = x0, x.in[1] = x1, x.in[2] = x2, x.in[3] = x3;
else
x.in[3] = x0, x.in[2] = x1, x.in[1] = x2, x.in[0] = x3;
diff --git a/sim/common/nrun.c b/sim/common/nrun.c
index 61c3c04..2e47715 100644
--- a/sim/common/nrun.c
+++ b/sim/common/nrun.c
@@ -99,7 +99,7 @@ main (int argc, char **argv)
/* We can't set the endianness in the callback structure until
sim_config is called, which happens in sim_open. */
default_callback.target_endian
- = (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN
+ = (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE);
/* Was there a program to run? */
diff --git a/sim/common/sim-config.c b/sim/common/sim-config.c
index ff20983..8e9b1dd 100644
--- a/sim/common/sim-config.c
+++ b/sim/common/sim-config.c
@@ -25,8 +25,8 @@
#include "bfd.h"
-int current_host_byte_order;
-int current_target_byte_order;
+enum bfd_endian current_host_byte_order = BFD_ENDIAN_UNKNOWN;
+enum bfd_endian current_target_byte_order = BFD_ENDIAN_UNKNOWN;
int current_stdio;
enum sim_alignments current_alignment;
@@ -40,16 +40,16 @@ int current_floating_point;
/* map a byte order onto a textual string */
static const char *
-config_byte_order_to_a (int byte_order)
+config_byte_order_to_a (enum bfd_endian byte_order)
{
switch (byte_order)
{
- case LITTLE_ENDIAN:
+ case BFD_ENDIAN_LITTLE:
return "LITTLE_ENDIAN";
- case BIG_ENDIAN:
+ case BFD_ENDIAN_BIG:
return "BIG_ENDIAN";
- case 0:
- return "0";
+ case BFD_ENDIAN_UNKNOWN:
+ return "UNKNOWN_ENDIAN";
}
return "UNKNOWN";
}
@@ -140,7 +140,7 @@ sim_config_default (SIM_DESC sd)
SIM_RC
sim_config (SIM_DESC sd)
{
- int prefered_target_byte_order;
+ enum bfd_endian prefered_target_byte_order;
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
/* extract all relevant information */
@@ -149,18 +149,18 @@ sim_config (SIM_DESC sd)
"--architecture"), it'll have no endianness. */
|| (!bfd_little_endian (STATE_PROG_BFD (sd))
&& !bfd_big_endian (STATE_PROG_BFD (sd))))
- prefered_target_byte_order = 0;
+ prefered_target_byte_order = BFD_ENDIAN_UNKNOWN;
else
prefered_target_byte_order = (bfd_little_endian (STATE_PROG_BFD (sd))
- ? LITTLE_ENDIAN
- : BIG_ENDIAN);
+ ? BFD_ENDIAN_LITTLE
+ : BFD_ENDIAN_BIG);
/* set the host byte order */
current_host_byte_order = 1;
if (*(char*)(&current_host_byte_order))
- current_host_byte_order = LITTLE_ENDIAN;
+ current_host_byte_order = BFD_ENDIAN_LITTLE;
else
- current_host_byte_order = BIG_ENDIAN;
+ current_host_byte_order = BFD_ENDIAN_BIG;
/* verify the host byte order */
if (CURRENT_HOST_BYTE_ORDER != current_host_byte_order)
@@ -174,22 +174,22 @@ sim_config (SIM_DESC sd)
/* set the target byte order */
#if (WITH_TREE_PROPERTIES)
- if (current_target_byte_order == 0)
+ if (current_target_byte_order == BFD_ENDIAN_UNKNOWN)
current_target_byte_order
= (tree_find_boolean_property (root, "/options/little-endian?")
- ? LITTLE_ENDIAN
- : BIG_ENDIAN);
+ ? BFD_ENDIAN_LITTLE
+ : BFD_ENDIAN_BIG);
#endif
- if (current_target_byte_order == 0
- && prefered_target_byte_order != 0)
+ if (current_target_byte_order == BFD_ENDIAN_UNKNOWN
+ && prefered_target_byte_order != BFD_ENDIAN_UNKNOWN)
current_target_byte_order = prefered_target_byte_order;
- if (current_target_byte_order == 0)
+ if (current_target_byte_order == BFD_ENDIAN_UNKNOWN)
current_target_byte_order = WITH_TARGET_BYTE_ORDER;
- if (current_target_byte_order == 0)
+ if (current_target_byte_order == BFD_ENDIAN_UNKNOWN)
current_target_byte_order = WITH_DEFAULT_TARGET_BYTE_ORDER;
/* verify the target byte order */
- if (CURRENT_TARGET_BYTE_ORDER == 0)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_UNKNOWN)
{
sim_io_eprintf (sd, "Target byte order unspecified\n");
return SIM_RC_FAIL;
@@ -198,7 +198,7 @@ sim_config (SIM_DESC sd)
sim_io_eprintf (sd, "Target (%s) and configured (%s) byte order in conflict\n",
config_byte_order_to_a (current_target_byte_order),
config_byte_order_to_a (CURRENT_TARGET_BYTE_ORDER));
- if (prefered_target_byte_order != 0
+ if (prefered_target_byte_order != BFD_ENDIAN_UNKNOWN
&& CURRENT_TARGET_BYTE_ORDER != prefered_target_byte_order)
sim_io_eprintf (sd, "Target (%s) and specified (%s) byte order in conflict\n",
config_byte_order_to_a (CURRENT_TARGET_BYTE_ORDER),
diff --git a/sim/common/sim-config.h b/sim/common/sim-config.h
index a5a8950..fbd9b25 100644
--- a/sim/common/sim-config.h
+++ b/sim/common/sim-config.h
@@ -30,181 +30,19 @@
particular it defines the macro's:
WITH_HOST_BYTE_ORDER The byte order of the host. Could
- be any of LITTLE_ENDIAN, BIG_ENDIAN
- or 0 (unknown). Those macro's also
+ be any of BFD_ENDIAN_LITTLE, BFD_ENDIAN_BIG,
+ or BFD_ENDIAN_UNKNOWN. Those macro's also
need to be defined.
*/
-/* NetBSD:
-
- NetBSD is easy, everything you could ever want is in a header file
- (well almost :-) */
-
-#if defined(__NetBSD__)
-# include <machine/endian.h>
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BYTE_ORDER
-# endif
-# if (BYTE_ORDER != WITH_HOST_BYTE_ORDER)
-# error "host endian incorrectly configured, check config.h"
-# endif
-#endif
-
-/* Linux is similarly easy. */
-
-#if defined(__linux__)
-# include <endian.h>
-# if defined(__LITTLE_ENDIAN) && !defined(LITTLE_ENDIAN)
-# define LITTLE_ENDIAN __LITTLE_ENDIAN
-# endif
-# if defined(__BIG_ENDIAN) && !defined(BIG_ENDIAN)
-# define BIG_ENDIAN __BIG_ENDIAN
-# endif
-# if defined(__BYTE_ORDER) && !defined(BYTE_ORDER)
-# define BYTE_ORDER __BYTE_ORDER
-# endif
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BYTE_ORDER
-# endif
-# if (BYTE_ORDER != WITH_HOST_BYTE_ORDER)
-# error "host endian incorrectly configured, check config.h"
-# endif
-#endif
-
-/* INSERT HERE - hosts that have available LITTLE_ENDIAN and
- BIG_ENDIAN macro's */
-
-
-/* Some hosts don't define LITTLE_ENDIAN or BIG_ENDIAN, help them out */
-
-#ifndef LITTLE_ENDIAN
-#define LITTLE_ENDIAN 1234
-#endif
-#ifndef BIG_ENDIAN
-#define BIG_ENDIAN 4321
-#endif
-
-
-/* SunOS on SPARC:
-
- Big endian last time I looked */
-
-#if defined(sparc) || defined(__sparc__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BIG_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN)
-# error "sun was big endian last time I looked ..."
-# endif
-#endif
-
-
-/* Random x86
-
- Little endian last time I looked */
-
-#if defined(i386) || defined(i486) || defined(i586) || defined (i686) || defined(__i386__) || defined(__i486__) || defined(__i586__) || defined (__i686__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN)
-# error "x86 was little endian last time I looked ..."
-# endif
-#endif
-
#if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP
#undef htonl
#undef ntohl
#define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
#define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
#endif
-
-/* Power or PowerPC running AIX */
-#if defined(_POWER) && defined(_AIX)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BIG_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN)
-# error "Power/PowerPC AIX was big endian last time I looked ..."
-# endif
-#endif
-
-/* Solaris running PowerPC */
-#if defined(__PPC) && defined(__sun__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN)
-# error "Solaris on PowerPCs was little endian last time I looked ..."
-# endif
-#endif
-
-/* HP/PA */
-#if defined(__hppa__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BIG_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN)
-# error "HP/PA was big endian last time I looked ..."
-# endif
-#endif
-
-/* Big endian MIPS */
-#if defined(__MIPSEB__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER BIG_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN)
-# error "MIPSEB was big endian last time I looked ..."
-# endif
-#endif
-
-/* Little endian MIPS */
-#if defined(__MIPSEL__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN)
-# error "MIPSEL was little endian last time I looked ..."
-# endif
-#endif
-
-/* Windows NT */
-#if defined(__WIN32__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN)
-# error "Windows NT was little endian last time I looked ..."
-# endif
-#endif
-
-/* Alpha running DEC unix */
-#if defined(__osf__) && defined(__alpha__)
-# if (WITH_HOST_BYTE_ORDER == 0)
-# undef WITH_HOST_BYTE_ORDER
-# define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN
-# endif
-# if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN)
-# error "AXP running DEC unix was little endian last time I looked ..."
-# endif
-#endif
-
-
-/* INSERT HERE - additional hosts that do not have LITTLE_ENDIAN and
- BIG_ENDIAN definitions available. */
/* Until devices and tree properties are sorted out, tell sim-config.c
not to call the tree_find_foo fns. */
@@ -217,28 +55,28 @@
of the host/target it is able to eliminate slower generic endian
handling code.
- Possible values are 0 (unknown), LITTLE_ENDIAN, BIG_ENDIAN */
+ Possible values are BFD_ENDIAN_UNKNOWN, BFD_ENDIAN_LITTLE, BFD_ENDIAN_BIG. */
#ifndef WITH_HOST_BYTE_ORDER
-#define WITH_HOST_BYTE_ORDER 0 /*unknown*/
+#define WITH_HOST_BYTE_ORDER BFD_ENDIAN_UNKNOWN
#endif
#ifndef WITH_TARGET_BYTE_ORDER
-#define WITH_TARGET_BYTE_ORDER 0 /*unknown*/
+#define WITH_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN
#endif
#ifndef WITH_DEFAULT_TARGET_BYTE_ORDER
-#define WITH_DEFAULT_TARGET_BYTE_ORDER 0 /* fatal */
+#define WITH_DEFAULT_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN
#endif
-extern int current_host_byte_order;
-#define CURRENT_HOST_BYTE_ORDER (WITH_HOST_BYTE_ORDER \
- ? WITH_HOST_BYTE_ORDER \
- : current_host_byte_order)
-extern int current_target_byte_order;
-#define CURRENT_TARGET_BYTE_ORDER (WITH_TARGET_BYTE_ORDER \
- ? WITH_TARGET_BYTE_ORDER \
- : current_target_byte_order)
+extern enum bfd_endian current_host_byte_order;
+#define CURRENT_HOST_BYTE_ORDER \
+ (WITH_HOST_BYTE_ORDER != BFD_ENDIAN_UNKNOWN \
+ ? WITH_HOST_BYTE_ORDER : current_host_byte_order)
+extern enum bfd_endian current_target_byte_order;
+#define CURRENT_TARGET_BYTE_ORDER \
+ (WITH_TARGET_BYTE_ORDER != BFD_ENDIAN_UNKNOWN \
+ ? WITH_TARGET_BYTE_ORDER : current_target_byte_order)
diff --git a/sim/common/sim-endian.c b/sim/common/sim-endian.c
index a699577..e8ef534 100644
--- a/sim/common/sim-endian.c
+++ b/sim/common/sim-endian.c
@@ -31,7 +31,7 @@
#define _SWAP_1(SET,RAW) SET (RAW)
#endif
-#if !defined(_SWAP_2) && (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN) && defined(htons)
+#if !defined(_SWAP_2) && (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) && defined(htons)
#define _SWAP_2(SET,RAW) SET htons (RAW)
#endif
@@ -39,7 +39,7 @@
#define _SWAP_2(SET,RAW) SET (((RAW) >> 8) | ((RAW) << 8))
#endif
-#if !defined(_SWAP_4) && (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN) && defined(htonl)
+#if !defined(_SWAP_4) && (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) && defined(htonl)
#define _SWAP_4(SET,RAW) SET htonl (RAW)
#endif
@@ -93,7 +93,7 @@ INLINE_SIM_ENDIAN\
(unsigned_8)
sim_endian_split_16 (unsigned_16 word, int w)
{
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
return word.a[1 - w];
}
@@ -110,7 +110,7 @@ sim_endian_join_16 (unsigned_8 h, unsigned_8 l)
{
unsigned_16 word;
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
word.a[0] = l;
word.a[1] = h;
diff --git a/sim/common/sim-events.c b/sim/common/sim-events.c
index f29e40c..54d75c2 100644
--- a/sim/common/sim-events.c
+++ b/sim/common/sim-events.c
@@ -635,7 +635,7 @@ sim_events_watch_sim (SIM_DESC sd,
/* type */
switch (byte_order)
{
- case 0:
+ case BFD_ENDIAN_UNKNOWN:
switch (nr_bytes)
{
case 1: new_event->watching = watch_sim_host_1; break;
@@ -645,7 +645,7 @@ sim_events_watch_sim (SIM_DESC sd,
default: sim_io_error (sd, "sim_events_watch_sim - invalid nr bytes");
}
break;
- case BIG_ENDIAN:
+ case BFD_ENDIAN_BIG:
switch (nr_bytes)
{
case 1: new_event->watching = watch_sim_be_1; break;
@@ -655,7 +655,7 @@ sim_events_watch_sim (SIM_DESC sd,
default: sim_io_error (sd, "sim_events_watch_sim - invalid nr bytes");
}
break;
- case LITTLE_ENDIAN:
+ case BFD_ENDIAN_LITTLE:
switch (nr_bytes)
{
case 1: new_event->watching = watch_sim_le_1; break;
@@ -714,7 +714,7 @@ sim_events_watch_core (SIM_DESC sd,
/* type */
switch (byte_order)
{
- case 0:
+ case BFD_ENDIAN_UNKNOWN:
switch (nr_bytes)
{
case 1: new_event->watching = watch_core_targ_1; break;
@@ -724,7 +724,7 @@ sim_events_watch_core (SIM_DESC sd,
default: sim_io_error (sd, "sim_events_watch_core - invalid nr bytes");
}
break;
- case BIG_ENDIAN:
+ case BFD_ENDIAN_BIG:
switch (nr_bytes)
{
case 1: new_event->watching = watch_core_be_1; break;
@@ -734,7 +734,7 @@ sim_events_watch_core (SIM_DESC sd,
default: sim_io_error (sd, "sim_events_watch_core - invalid nr bytes");
}
break;
- case LITTLE_ENDIAN:
+ case BFD_ENDIAN_LITTLE:
switch (nr_bytes)
{
case 1: new_event->watching = watch_core_le_1; break;
diff --git a/sim/common/sim-events.h b/sim/common/sim-events.h
index 60e2046..c01cea0 100644
--- a/sim/common/sim-events.h
+++ b/sim/common/sim-events.h
@@ -154,7 +154,8 @@ extern sim_event *sim_events_watch_clock
true.
HOST_ADDR: pointer into the host address space.
- BYTE_ORDER: 0 - host endian; BIG_ENDIAN; LITTLE_ENDIAN */
+ BYTE_ORDER: BFD_ENDIAN_UNKNOWN - host endian; BFD_ENDIAN_BIG;
+ BFD_ENDIAN_LITTLE. */
extern sim_event *sim_events_watch_sim
(SIM_DESC sd,
@@ -173,7 +174,8 @@ extern sim_event *sim_events_watch_sim
true.
CORE_ADDR/MAP: pointer into the target address space.
- BYTE_ORDER: 0 - current target endian; BIG_ENDIAN; LITTLE_ENDIAN */
+ BYTE_ORDER: BFD_ENDIAN_UNKNOWN - host endian; BFD_ENDIAN_BIG;
+ BFD_ENDIAN_LITTLE. */
extern sim_event *sim_events_watch_core
(SIM_DESC sd,
diff --git a/sim/common/sim-n-core.h b/sim/common/sim-n-core.h
index d67fb9c..0c1cb7a 100644
--- a/sim/common/sim-n-core.h
+++ b/sim/common/sim-n-core.h
@@ -250,7 +250,7 @@ sim_core_read_misaligned_N(sim_cpu *cpu,
read_transfer, sim_core_unaligned_signal);
if (CURRENT_HOST_BYTE_ORDER != CURRENT_TARGET_BYTE_ORDER)
val = SWAP_M (val);
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
val >>= (M - N) * 8;
PROFILE_COUNT_CORE (cpu, addr, N, map);
if (TRACE_P (cpu, TRACE_CORE_IDX))
@@ -366,7 +366,7 @@ sim_core_write_misaligned_N(sim_cpu *cpu,
unsigned_M val)
{
unsigned_M data = val;
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
data <<= (M - N) * 8;
if (CURRENT_HOST_BYTE_ORDER != CURRENT_TARGET_BYTE_ORDER)
data = SWAP_M (data);
diff --git a/sim/common/sim-n-endian.h b/sim/common/sim-n-endian.h
index 4cfb925..ef7d2ce 100644
--- a/sim/common/sim-n-endian.h
+++ b/sim/common/sim-n-endian.h
@@ -81,7 +81,7 @@ INLINE_SIM_ENDIAN\
(unsigned_N)
endian_h2be_N(unsigned_N raw_in)
{
- if (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN) {
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_BIG) {
return raw_in;
}
else {
@@ -95,7 +95,7 @@ INLINE_SIM_ENDIAN\
(unsigned_N)
endian_be2h_N(unsigned_N raw_in)
{
- if (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN) {
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_BIG) {
return raw_in;
}
else {
@@ -109,7 +109,7 @@ INLINE_SIM_ENDIAN\
(unsigned_N)
endian_h2le_N(unsigned_N raw_in)
{
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) {
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) {
return raw_in;
}
else {
@@ -123,7 +123,7 @@ INLINE_SIM_ENDIAN\
(unsigned_N)
endian_le2h_N(unsigned_N raw_in)
{
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN) {
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE) {
return raw_in;
}
else {
@@ -145,7 +145,7 @@ offset_N (unsigned_N *x,
ASSERT (offset + sizeof_word <= sizeof(unsigned_N));
ASSERT (word < (sizeof (unsigned_N) / sizeof_word));
ASSERT ((sizeof (unsigned_N) % sizeof_word) == 0);
- if (WITH_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (WITH_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
out = in + sizeof (unsigned_N) - offset - sizeof_word;
}
diff --git a/sim/common/sim-options.c b/sim/common/sim-options.c
index 1fca5de..e252756 100644
--- a/sim/common/sim-options.c
+++ b/sim/common/sim-options.c
@@ -197,23 +197,23 @@ standard_option_handler (SIM_DESC sd, sim_cpu *cpu, int opt,
case OPTION_ENDIAN:
if (strcmp (arg, "big") == 0)
{
- if (WITH_TARGET_BYTE_ORDER == LITTLE_ENDIAN)
+ if (WITH_TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
sim_io_eprintf (sd, "Simulator compiled for little endian only.\n");
return SIM_RC_FAIL;
}
/* FIXME:wip: Need to set something in STATE_CONFIG. */
- current_target_byte_order = BIG_ENDIAN;
+ current_target_byte_order = BFD_ENDIAN_BIG;
}
else if (strcmp (arg, "little") == 0)
{
- if (WITH_TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (WITH_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
sim_io_eprintf (sd, "Simulator compiled for big endian only.\n");
return SIM_RC_FAIL;
}
/* FIXME:wip: Need to set something in STATE_CONFIG. */
- current_target_byte_order = LITTLE_ENDIAN;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
}
else
{
diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog
index 44e24fe..130e878 100644
--- a/sim/cr16/ChangeLog
+++ b/sim/cr16/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
diff --git a/sim/cr16/configure b/sim/cr16/configure
index 676e9a9..c538ede 100755
--- a/sim/cr16/configure
+++ b/sim/cr16/configure
@@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/cr16/configure.ac b/sim/cr16/configure.ac
index ebf8bd3..7464e34 100644
--- a/sim/cr16/configure.ac
+++ b/sim/cr16/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_ENVIRONMENT
diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog
index 1e28c12..79ce999 100644
--- a/sim/cris/ChangeLog
+++ b/sim/cris/ChangeLog
@@ -1,5 +1,12 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* sim-if.c (xprintf, eprintf): Delete.
(cris_load_elf_file): Delete callback. Change xprintf to
sim_io_printf and eprintf to sim_io_eprintf.
diff --git a/sim/cris/arch.h b/sim/cris/arch.h
index f765f4a..efd861f 100644
--- a/sim/cris/arch.h
+++ b/sim/cris/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef CRIS_ARCH_H
#define CRIS_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_CRISV10, MODEL_CRISV32, MODEL_MAX
diff --git a/sim/cris/configure b/sim/cris/configure
index be7f6fc..9914337 100755
--- a/sim/cris/configure
+++ b/sim/cris/configure
@@ -12942,31 +12942,31 @@ done
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12976,10 +12976,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13036,9 +13036,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13272,12 +13272,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/cris/configure.ac b/sim/cris/configure.ac
index 4e6b1be..5b384a2 100644
--- a/sim/cris/configure.ac
+++ b/sim/cris/configure.ac
@@ -8,7 +8,7 @@ SIM_AC_COMMON
# For dv-rv and rvdummy.
AC_CHECK_HEADERS(sys/socket.h sys/select.h limits.h sys/param.h)
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog
index 6a796bb..1a2f94f 100644
--- a/sim/d10v/ChangeLog
+++ b/sim/d10v/ChangeLog
@@ -1,3 +1,7 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (d10v_reg_store, d10v_reg_fetch): Define.
diff --git a/sim/d10v/configure b/sim/d10v/configure
index d46ffcb..3fd5d8c 100755
--- a/sim/d10v/configure
+++ b/sim/d10v/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog
index e9a3241..fd23fe6 100644
--- a/sim/erc32/ChangeLog
+++ b/sim/erc32/ChangeLog
@@ -1,3 +1,7 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-12-26 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/erc32/configure b/sim/erc32/configure
index 94c6fa4..d12525b 100755
--- a/sim/erc32/configure
+++ b/sim/erc32/configure
@@ -13034,9 +13034,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13270,12 +13270,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog
index a566ba0..dd28834 100644
--- a/sim/frv/ChangeLog
+++ b/sim/frv/ChangeLog
@@ -1,5 +1,14 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+ * frv.c (frvbf_h_fr_double_get_handler): Change LITTLE_ENDIAN to
+ BFD_ENDIAN_LITTLE.
+ (frvbf_h_fr_double_set_handler): Likewise.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* reset.c (frv_term): Change current_state to sd.
* sim-if.c (current_state): Delete.
(sim_open): Delete current_state assignment.
diff --git a/sim/frv/arch.h b/sim/frv/arch.h
index 06abe86..18d0940 100644
--- a/sim/frv/arch.h
+++ b/sim/frv/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef FRV_ARCH_H
#define FRV_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_FRV, MODEL_FR550, MODEL_FR500, MODEL_TOMCAT
diff --git a/sim/frv/configure b/sim/frv/configure
index ca3363c..40b8bdf 100755
--- a/sim/frv/configure
+++ b/sim/frv/configure
@@ -12918,31 +12918,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13012,9 +13012,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/frv/configure.ac b/sim/frv/configure.ac
index ebaf6ab..ad73eed 100644
--- a/sim/frv/configure.ac
+++ b/sim/frv/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/frv/frv.c b/sim/frv/frv.c
index 2b78edb..594931f 100644
--- a/sim/frv/frv.c
+++ b/sim/frv/frv.c
@@ -303,7 +303,7 @@ frvbf_h_fr_double_get_handler (SIM_CPU *current_cpu, UINT fr)
/* Check the register alignment. */
fr = check_fr_register_alignment (current_cpu, fr, 1);
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
value.as_sf[1] = GET_H_FR (fr);
value.as_sf[0] = GET_H_FR (fr + 1);
@@ -329,7 +329,7 @@ frvbf_h_fr_double_set_handler (SIM_CPU *current_cpu, UINT fr, DF newval)
fr = check_fr_register_alignment (current_cpu, fr, 1);
value.as_df = newval;
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
SET_H_FR (fr , value.as_sf[1]);
SET_H_FR (fr + 1, value.as_sf[0]);
diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog
index 7164c7f..3f30164 100644
--- a/sim/ft32/ChangeLog
+++ b/sim/ft32/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
diff --git a/sim/ft32/configure b/sim/ft32/configure
index d16b9c5..a12de76 100755
--- a/sim/ft32/configure
+++ b/sim/ft32/configure
@@ -12912,31 +12912,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/ft32/configure.ac b/sim/ft32/configure.ac
index 2107f74..57573d8 100644
--- a/sim/ft32/configure.ac
+++ b/sim/ft32/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_ENVIRONMENT
diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog
index 7d87d1f..2327bb4 100644
--- a/sim/h8300/ChangeLog
+++ b/sim/h8300/ChangeLog
@@ -1,3 +1,8 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* compile.c (sim_state_initialize): Delete.
diff --git a/sim/h8300/configure b/sim/h8300/configure
index 79043dc..12b72e4 100755
--- a/sim/h8300/configure
+++ b/sim/h8300/configure
@@ -12894,31 +12894,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12928,10 +12928,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
diff --git a/sim/h8300/configure.ac b/sim/h8300/configure.ac
index 53a02bb..3966160 100644
--- a/sim/h8300/configure.ac
+++ b/sim/h8300/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
AC_CHECK_HEADERS(sys/param.h)
diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog
index 07c6ef6..7fbebd5 100644
--- a/sim/iq2000/ChangeLog
+++ b/sim/iq2000/ChangeLog
@@ -1,5 +1,11 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* sim-if.c (sim_open): Delete #if 0 sim_add_option_table call.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/iq2000/arch.h b/sim/iq2000/arch.h
index ab26832..3e062db 100644
--- a/sim/iq2000/arch.h
+++ b/sim/iq2000/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef IQ2000_ARCH_H
#define IQ2000_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_IQ2000, MODEL_MAX
diff --git a/sim/iq2000/configure b/sim/iq2000/configure
index 26937d3..7f6b7bf 100755
--- a/sim/iq2000/configure
+++ b/sim/iq2000/configure
@@ -12918,31 +12918,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13012,9 +13012,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/iq2000/configure.ac b/sim/iq2000/configure.ac
index 78dcbb6..923ae92 100644
--- a/sim/iq2000/configure.ac
+++ b/sim/iq2000/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog
index 5aaab31..552e848 100644
--- a/sim/lm32/ChangeLog
+++ b/sim/lm32/ChangeLog
@@ -1,5 +1,11 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* sim-if.c (free_state, print_lm32_misc_cpu): Delete prototypes.
(lm32_option_handler, OPTION_ENDIAN, lm32_options): Delete.
(sim_open): Delete sim_add_option_table call.
diff --git a/sim/lm32/arch.h b/sim/lm32/arch.h
index b2ed4b2..720705a 100644
--- a/sim/lm32/arch.h
+++ b/sim/lm32/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef LM32_ARCH_H
#define LM32_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_LM32, MODEL_MAX
diff --git a/sim/lm32/configure b/sim/lm32/configure
index be10750..3968c92 100755
--- a/sim/lm32/configure
+++ b/sim/lm32/configure
@@ -12915,31 +12915,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12949,10 +12949,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13009,9 +13009,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13245,12 +13245,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/lm32/configure.ac b/sim/lm32/configure.ac
index 764c611..90f5e2b 100644
--- a/sim/lm32/configure.ac
+++ b/sim/lm32/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog
index 8b65bb9..7578315 100644
--- a/sim/m32r/ChangeLog
+++ b/sim/m32r/ChangeLog
@@ -1,5 +1,14 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+ * traps-linux.c (conv_endian): Change LITTLE_ENDIAN to
+ BFD_ENDIAN_LITTLE.
+ (conv_endian16): Likewise.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* sim-if.c (sim_open): Delete #if 0 sim_add_option_table call.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/m32r/arch.h b/sim/m32r/arch.h
index 8341c4c..93e7e2e 100644
--- a/sim/m32r/arch.h
+++ b/sim/m32r/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef M32R_ARCH_H
#define M32R_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_M32R_D, MODEL_TEST, MODEL_M32RX, MODEL_M32R2
diff --git a/sim/m32r/configure b/sim/m32r/configure
index 5c263da..8742adb 100755
--- a/sim/m32r/configure
+++ b/sim/m32r/configure
@@ -12920,31 +12920,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12954,10 +12954,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13014,9 +13014,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13250,12 +13250,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/m32r/configure.ac b/sim/m32r/configure.ac
index d92e62b..68fb20d 100644
--- a/sim/m32r/configure.ac
+++ b/sim/m32r/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/m32r/traps-linux.c b/sim/m32r/traps-linux.c
index f266302..9220451 100644
--- a/sim/m32r/traps-linux.c
+++ b/sim/m32r/traps-linux.c
@@ -136,7 +136,7 @@ conv_endian (unsigned int tvalue)
unsigned int hvalue;
unsigned int t1, t2, t3, t4;
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
t1 = tvalue & 0xff000000;
t2 = tvalue & 0x00ff0000;
@@ -160,7 +160,7 @@ conv_endian16 (unsigned short tvalue)
unsigned short hvalue;
unsigned short t1, t2;
- if (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+ if (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
t1 = tvalue & 0xff00;
t2 = tvalue & 0x00ff;
diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog
index 1df6810..fb9c4bc 100644
--- a/sim/m68hc11/ChangeLog
+++ b/sim/m68hc11/ChangeLog
@@ -1,3 +1,8 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change LITTLE_ENDIAN to BIG_ENDIAN.
diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure
index 3a277d1..df2d872 100755
--- a/sim/m68hc11/configure
+++ b/sim/m68hc11/configure
@@ -12955,31 +12955,31 @@ fi
fi
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12989,10 +12989,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13049,9 +13049,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13285,12 +13285,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/m68hc11/configure.ac b/sim/m68hc11/configure.ac
index cbfe9e8..aafbb31 100644
--- a/sim/m68hc11/configure.ac
+++ b/sim/m68hc11/configure.ac
@@ -7,7 +7,7 @@ SIM_AC_COMMON
dnl Options available in this module
SIM_AC_OPTION_INLINE()
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_WARNINGS
diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog
index fb80f2c..ce99714 100644
--- a/sim/mcore/ChangeLog
+++ b/sim/mcore/ChangeLog
@@ -1,3 +1,7 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
diff --git a/sim/mcore/configure b/sim/mcore/configure
index d46ffcb..3fd5d8c 100755
--- a/sim/mcore/configure
+++ b/sim/mcore/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog
index 9346778..3c21d5e 100644
--- a/sim/microblaze/ChangeLog
+++ b/sim/microblaze/ChangeLog
@@ -1,3 +1,7 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (sim_store_register): Rename to ...
diff --git a/sim/microblaze/configure b/sim/microblaze/configure
index d46ffcb..3fd5d8c 100755
--- a/sim/microblaze/configure
+++ b/sim/microblaze/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog
index a77058e..ba0a50b 100644
--- a/sim/mips/ChangeLog
+++ b/sim/mips/ChangeLog
@@ -1,5 +1,12 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (mips_endian): Change LITTLE_ENDIAN to LITTLE.
+ (default_endian): Likewise. Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+ * sim-main.h (BigEndianMem): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* dv-tx3904cpu.c (CPU, SD): Delete.
2015-12-30 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/mips/configure b/sim/mips/configure
index 6f1d136..c31d65e 100755
--- a/sim/mips/configure
+++ b/sim/mips/configure
@@ -13037,9 +13037,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13273,12 +13273,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
@@ -13426,14 +13426,14 @@ esac
mips_endian=
default_endian=
case "${target}" in
- mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
- mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;;
- mips64*-*-*) default_endian=BIG_ENDIAN ;;
- mips16*-*-*) default_endian=BIG_ENDIAN ;;
- mipsisa32*-*-*) default_endian=BIG_ENDIAN ;;
- mipsisa64*-*-*) default_endian=BIG_ENDIAN ;;
- mips*-*-*) default_endian=BIG_ENDIAN ;;
- *) default_endian=BIG_ENDIAN ;;
+ mips64el*-*-*) mips_endian=LITTLE ;;
+ mips64vr*el-*-*) default_endian=LITTLE ;;
+ mips64*-*-*) default_endian=BIG ;;
+ mips16*-*-*) default_endian=BIG ;;
+ mipsisa32*-*-*) default_endian=BIG ;;
+ mipsisa64*-*-*) default_endian=BIG ;;
+ mips*-*-*) default_endian=BIG ;;
+ *) default_endian=BIG ;;
esac
wire_endian="$mips_endian"
@@ -13441,26 +13441,26 @@ default_endian="$default_endian"
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -13470,10 +13470,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13769,7 +13769,7 @@ if test ${sim_gen} = MULTI; then
cat << __EOF__ > multi-run.c
/* Main entry point for MULTI simulators.
- Copyright (C) 2003-2015 Free Software Foundation, Inc.
+ Copyright (C) 2003-2016 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/sim/mips/configure.ac b/sim/mips/configure.ac
index 7f04473..91e7b0c 100644
--- a/sim/mips/configure.ac
+++ b/sim/mips/configure.ac
@@ -37,14 +37,14 @@ AC_SUBST(SIM_SUBTARGET)
mips_endian=
default_endian=
case "${target}" in
- mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
- mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;;
- mips64*-*-*) default_endian=BIG_ENDIAN ;;
- mips16*-*-*) default_endian=BIG_ENDIAN ;;
- mipsisa32*-*-*) default_endian=BIG_ENDIAN ;;
- mipsisa64*-*-*) default_endian=BIG_ENDIAN ;;
- mips*-*-*) default_endian=BIG_ENDIAN ;;
- *) default_endian=BIG_ENDIAN ;;
+ mips64el*-*-*) mips_endian=LITTLE ;;
+ mips64vr*el-*-*) default_endian=LITTLE ;;
+ mips64*-*-*) default_endian=BIG ;;
+ mips16*-*-*) default_endian=BIG ;;
+ mipsisa32*-*-*) default_endian=BIG ;;
+ mipsisa64*-*-*) default_endian=BIG ;;
+ mips*-*-*) default_endian=BIG ;;
+ *) default_endian=BIG ;;
esac
SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian)
diff --git a/sim/mips/sim-main.h b/sim/mips/sim-main.h
index b7e3072..0ea1234 100644
--- a/sim/mips/sim-main.h
+++ b/sim/mips/sim-main.h
@@ -592,7 +592,7 @@ struct sim_state {
/* Hardware configuration. Affects endianness of LoadMemory and
StoreMemory and the endianness of Kernel and Supervisor mode
execution. The value is 0 for little-endian; 1 for big-endian. */
-#define BigEndianMem (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
+#define BigEndianMem (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
/*(state & simBE) ? 1 : 0)*/
/* ReverseEndian */
diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog
index d59a7e8..1d05f8d 100644
--- a/sim/mn10300/ChangeLog
+++ b/sim/mn10300/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define.
diff --git a/sim/mn10300/configure b/sim/mn10300/configure
index 6e4246e..1fac8bf 100755
--- a/sim/mn10300/configure
+++ b/sim/mn10300/configure
@@ -12917,31 +12917,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12951,10 +12951,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13011,9 +13011,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13247,12 +13247,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/mn10300/configure.ac b/sim/mn10300/configure.ac
index 037d405..7d3c223 100644
--- a/sim/mn10300/configure.ac
+++ b/sim/mn10300/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_WARNINGS
diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog
index 439b69c..718e804 100644
--- a/sim/moxie/ChangeLog
+++ b/sim/moxie/ChangeLog
@@ -1,3 +1,8 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (sim_store_register): Rename to ...
diff --git a/sim/moxie/configure b/sim/moxie/configure
index 3232de3..6990a8f 100755
--- a/sim/moxie/configure
+++ b/sim/moxie/configure
@@ -13006,31 +13006,31 @@ fi
-wire_endian="BIG_ENDIAN"
+wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -13040,10 +13040,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13100,9 +13100,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13336,12 +13336,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/moxie/configure.ac b/sim/moxie/configure.ac
index 34b80ce..a7f2b82 100644
--- a/sim/moxie/configure.ac
+++ b/sim/moxie/configure.ac
@@ -7,7 +7,7 @@ SIM_AC_COMMON
AC_CHECK_TOOL(DTC, dtc)
-SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_ENVIRONMENT
diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog
index dd9aad0..db8269e 100644
--- a/sim/msp430/ChangeLog
+++ b/sim/msp430/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (sim_dis_read): Change private_data to application_data.
diff --git a/sim/msp430/configure b/sim/msp430/configure
index 796741b..229096a 100755
--- a/sim/msp430/configure
+++ b/sim/msp430/configure
@@ -12918,31 +12918,31 @@ done
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
diff --git a/sim/msp430/configure.ac b/sim/msp430/configure.ac
index f24480e..b896ce4 100644
--- a/sim/msp430/configure.ac
+++ b/sim/msp430/configure.ac
@@ -26,7 +26,7 @@ SIM_AC_COMMON
AC_CHECK_HEADERS(getopt.h)
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_INLINE
SIM_AC_OPTION_WARNINGS
diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog
index 0a0bb56..56e9f10 100644
--- a/sim/sh/ChangeLog
+++ b/sim/sh/ChangeLog
@@ -1,3 +1,10 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * interp.c (target_little_endian): Change LITTLE_ENDIAN to
+ BFD_ENDIAN_LITTLE.
+ (host_little_endian): Likewise.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (sim_store_register): Rename to ...
diff --git a/sim/sh/configure b/sim/sh/configure
index d46ffcb..3fd5d8c 100755
--- a/sim/sh/configure
+++ b/sim/sh/configure
@@ -12917,26 +12917,26 @@ default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12946,10 +12946,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13006,9 +13006,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13242,12 +13242,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/sh/interp.c b/sim/sh/interp.c
index 3abeda6..f7c4948 100644
--- a/sim/sh/interp.c
+++ b/sim/sh/interp.c
@@ -116,10 +116,10 @@ struct loop_bounds { unsigned char *start, *end; };
/* These variables are at file scope so that functions other than
sim_resume can use the fetch/store macros */
-#define target_little_endian (CURRENT_TARGET_BYTE_ORDER == LITTLE_ENDIAN)
+#define target_little_endian (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
static int global_endianw, endianb;
static int target_dsp;
-#define host_little_endian (CURRENT_HOST_BYTE_ORDER == LITTLE_ENDIAN)
+#define host_little_endian (CURRENT_HOST_BYTE_ORDER == BFD_ENDIAN_LITTLE)
static int maskw = 0;
static int maskl = 0;
diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog
index 74f89bc..18a1d8a 100644
--- a/sim/sh64/ChangeLog
+++ b/sim/sh64/ChangeLog
@@ -1,5 +1,11 @@
2016-01-02 Mike Frysinger <vapier@gentoo.org>
+ * arch.h (TARGET_BIG_ENDIAN): Delete.
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
* sim-if.c (sim_open): Delete #if 0 sim_add_option_table call.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/sh64/arch.h b/sim/sh64/arch.h
index 88cd037..aaa3991 100644
--- a/sim/sh64/arch.h
+++ b/sim/sh64/arch.h
@@ -24,8 +24,6 @@ This file is part of the GNU simulators.
#ifndef SH_ARCH_H
#define SH_ARCH_H
-#define TARGET_BIG_ENDIAN 1
-
/* Enum declaration for model types. */
typedef enum model_type {
MODEL_SH2A_NOFPU, MODEL_SH2A_FPU, MODEL_SH4_NOFPU, MODEL_SH4
diff --git a/sim/sh64/configure b/sim/sh64/configure
index 6310f42..7c3b424 100755
--- a/sim/sh64/configure
+++ b/sim/sh64/configure
@@ -12919,30 +12919,30 @@ sim_link_links="${sim_link_links} targ-vals.def"
wire_endian=""
-default_endian="BIG_ENDIAN"
+default_endian="BIG"
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12952,10 +12952,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13012,9 +13012,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13248,12 +13248,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/sh64/configure.ac b/sim/sh64/configure.ac
index c979458..4da1756 100644
--- a/sim/sh64/configure.ac
+++ b/sim/sh64/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN([], BIG_ENDIAN)
+SIM_AC_OPTION_ENDIAN([], BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_SCACHE(16384)
diff --git a/sim/testsuite/ChangeLog b/sim/testsuite/ChangeLog
index f790420..63ec3ed 100644
--- a/sim/testsuite/ChangeLog
+++ b/sim/testsuite/ChangeLog
@@ -1,3 +1,8 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * common/bits-gen.c (main): Change BIG_ENDIAN to BFD_ENDIAN_BIG and
+ LITTLE_ENDIAN and BFD_ENDIAN_LITTLE.
+
2015-11-24 Nick Clifton <nickc@redhat.com>
* configure: Regenerate.
diff --git a/sim/testsuite/common/bits-gen.c b/sim/testsuite/common/bits-gen.c
index 84e4372..6e7dd75 100644
--- a/sim/testsuite/common/bits-gen.c
+++ b/sim/testsuite/common/bits-gen.c
@@ -233,7 +233,7 @@ main (int argc, char *argv[])
printf ("#define WITH_TARGET_WORD_BITSIZE %d\n", bitsize);
printf ("#define WITH_TARGET_WORD_MSB %d\n", msb);
printf ("#define WITH_HOST_WORD_BITSIZE %d\n", sizeof (int) * 8);
- printf ("#define WITH_TARGET_BYTE_ORDER %s\n", big_endian ? "BIG_ENDIAN" : "LITTLE_ENDIAN");
+ printf ("#define WITH_TARGET_BYTE_ORDER %s\n", big_endian ? "BFD_ENDIAN_BIG" : "BFD_ENDIAN_LITTLE");
printf ("\n");
printf ("#define SIM_BITS_INLINE (ALL_H_INLINE)\n");
printf ("\n");
diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog
index 2b66488..d21492b 100644
--- a/sim/v850/ChangeLog
+++ b/sim/v850/ChangeLog
@@ -1,3 +1,9 @@
+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
+ LITTLE.
+ * configure: Regenerate.
+
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (v850_reg_store, v850_reg_fetch): Define.
diff --git a/sim/v850/configure b/sim/v850/configure
index 97113c3..c1e449a 100755
--- a/sim/v850/configure
+++ b/sim/v850/configure
@@ -12911,31 +12911,31 @@ sim_link_links="${sim_link_links} targ-vals.def"
-wire_endian="LITTLE_ENDIAN"
+wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then :
enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
@@ -12945,10 +12945,10 @@ if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
fi
else
if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
else
if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
else
sim_endian=
fi
@@ -13005,9 +13005,9 @@ fi
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
@@ -13241,12 +13241,12 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
diff --git a/sim/v850/configure.ac b/sim/v850/configure.ac
index 1471eeb..0ac54e0 100644
--- a/sim/v850/configure.ac
+++ b/sim/v850/configure.ac
@@ -5,7 +5,7 @@ sinclude(../common/acinclude.m4)
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN)
+SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(,NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_WARNINGS