sim: switch to AC_CONFIG_MACRO_DIRS

Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.

4 files changed, 35 insertions, 1834 deletions

diff --git a/sim/bpf/ChangeLog b/sim/bpf/ChangeLog
index acfcc0b..cd934ad 100644
--- a/sim/bpf/ChangeLog
+++ b/sim/bpf/ChangeLog
@@ -1,3 +1,8 @@
+2021-02-13  Mike Frysinger  <vapier@gentoo.org>
+
+	* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
+	* aclocal.m4, configure: Regenerate.
+
 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 
 	* configure: Regenerate.
diff --git a/sim/bpf/aclocal.m4 b/sim/bpf/aclocal.m4
index e9f11c7..1c83b20 100644
--- a/sim/bpf/aclocal.m4
+++ b/sim/bpf/aclocal.m4
@@ -45,25 +45,6 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 2003-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
@@ -117,3 +98,16 @@ AC_DEFUN([_AM_SUBST_NOTMAKE])
 # Public sister of _AM_SUBST_NOTMAKE.
 AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
+m4_include([../../config/acx.m4])
+m4_include([../../config/depstand.m4])
+m4_include([../../config/gettext-sister.m4])
+m4_include([../../config/lead-dot.m4])
+m4_include([../../config/override.m4])
+m4_include([../../config/plugins.m4])
+m4_include([../../config/zlib.m4])
+m4_include([../../libtool.m4])
+m4_include([../../ltoptions.m4])
+m4_include([../../ltsugar.m4])
+m4_include([../../ltversion.m4])
+m4_include([../../lt~obsolete.m4])
+m4_include([../common/acinclude.m4])
diff --git a/sim/bpf/configure b/sim/bpf/configure
index 658975c..f9aa6aa 100755
--- a/sim/bpf/configure
+++ b/sim/bpf/configure
@@ -710,19 +710,6 @@ CPPFLAGS
 LDFLAGS
 CFLAGS
 CC
-WERROR_CFLAGS
-WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment
 target_alias
 host_alias
 build_alias
@@ -760,7 +747,20 @@ PACKAGE_VERSION
 PACKAGE_TARNAME
 PACKAGE_NAME
 PATH_SEPARATOR
-SHELL'
+SHELL
+WERROR_CFLAGS
+WARN_CFLAGS
+sim_reserved_bits
+sim_inline
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_endian
+sim_bitsize
+sim_alignment'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
@@ -2367,1804 +2367,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-# This file contains common code used by all simulators.
-#
-# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
-# directory.  It is intended to be invoked before any target specific stuff.
-# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
-# It is intended to be invoked last.
-#
-# See README-HACKING for more details.
-
-# Include global overrides and fixes for Autoconf.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-
-
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-# LT_INIT
-
-# Old names:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-
-
-# Initialize.
-
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-
-
-# Initialize.
-
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-
-
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-
-
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-
-
-
-# C support is built-in for now
-
-
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-# _LT_LANG
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_TAG_COMPILER
-# ----------------
-# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-
-
-
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-
-
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_ENABLE_LOCK
-# ---------------
-# _LT_ENABLE_LOCK
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-# _LT_COMPILER_OPTION
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-# _LT_LINKER_OPTION
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_CMD_MAX_LEN
-#---------------
-# LT_CMD_MAX_LEN
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-# LT_SYS_DLOPEN_SELF
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-# LT_PATH_LD
-
-# Old names:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-# LT_PATH_NM
-
-# Old names:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_LIB_M
-# --------
-# check for math library
-# LT_LIB_M
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
- # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-# _LT_LANG_CXX_CONFIG
-
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_PROG_RC
-# ----------
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-
-
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-# _LT_DECL_SED
-
-#m4_ifndef
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
-#   Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
-# saved as a flag.
-
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME.  If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-# _LT_SET_OPTIONS
-
-
-## --------------------------------- ##
-## Macros to handle LT_INIT options. ##
-## --------------------------------- ##
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-# win32-dll
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-# _LT_ENABLE_SHARED
-
-
-
-
-# Old names:
-
-
-
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-# _LT_ENABLE_STATIC
-
-
-
-
-# Old names:
-
-
-
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-# _LT_ENABLE_FAST_INSTALL
-
-
-
-
-# Old names:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-# _LT_WITH_PIC
-
-
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand.  It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4.  It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once.  We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf.  It tells the user to run autoupdate, and
-# then outputs the replacement expansion.  We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-## ----------------- ##
-## LTDL_INIT Options ##
-## ----------------- ##
-
-
-
-
-
-
-
-
-
-
-# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-
-
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-
-
-
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-
-
-# ltversion.m4 -- version numbers			-*- Autoconf -*-
-#
-#   Copyright (C) 2004 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# Generated from ltversion.in.
-
-# serial 3134 ltversion.m4
-# This file is part of GNU Libtool
-
-
-
-
-
-
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 4 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else.  This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-##                                                          -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# Based on depend.m4 from automake 1.9, modified for standalone use in
-# an environment where GNU make is required.
-
-# ZW_PROG_COMPILER_DEPENDENCIES
-# -----------------------------
-# Variant of _AM_DEPENDENCIES which just does the dependency probe and
-# sets fooDEPMODE accordingly.  Cache-variable compatible with
-# original; not side-effect compatible.  As the users of this macro
-# may require accurate dependencies for correct builds, it does *not*
-# honor --disable-dependency-checking, and failure to detect a usable
-# method is an error.  depcomp is assumed to be located in
-# $ac_aux_dir.
-#
-# FIXME: Should use the Autoconf 2.5x language-selection mechanism.
-
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-
-
-# ZW_CREATE_DEPDIR
-# ----------------
-# As AM_SET_DEPDIR, but also create the directory at config.status time.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# intl sister-directory configuration rules.
-#
-
-# The idea behind this macro is that there's no need to repeat all the
-# autoconf probes done by the intl directory - it's already done them
-# for us.  In fact, there's no need even to look at the cache for the
-# answers.  All we need to do is nab a few pieces of information.
-# The intl directory is set up to make this easy, by generating a
-# small file which can be sourced as a shell script; then we produce
-# the necessary substitutions and definitions for this directory.
-
-
-
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
-
-
-
-
-
-
-
-
-####
-# _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
-
-####
-# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
-# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
-
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
-# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
-
-
-
-# Backported from Autoconf 2.5x; can go away when and if
-# we switch.  Put the OS path separator in $PATH_SEPARATOR.
-
-
-
-
-
-
-
-
-# ACX_HAVE_GCC_FOR_TARGET
-# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
-
-
-# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
-# Searching for installed target binutils.  We need to take extra care,
-# else we may find the wrong assembler, linker, etc., and lose.
-#
-# First try --with-build-time-tools, if specified.
-#
-# For build != host, we ask the installed GCC for the name of the tool it
-# uses, and accept it if it is an absolute path.  This is because the
-# only good choice for a compiler is the same GCC version that is being
-# installed (or we couldn't make target libraries), and we assume that
-# on the host system we'll have not only the same GCC version, but also
-# the same binutils version.
-#
-# For build == host, search the same directories that the installed
-# compiler will search.  We used to do this for the assembler, linker,
-# and nm only; for simplicity of configuration, however, we extend this
-# criterion to tools (such as ar and ranlib) that are never invoked by
-# the compiler, to avoid mismatches.
-#
-# Also note we have to check MD_EXEC_PREFIX before checking the user's path
-# if build == target.  This makes the most sense only when bootstrapping,
-# but we also do so when build != host.  In this case, we hope that the
-# build and host systems will have similar contents of MD_EXEC_PREFIX.
-#
-# If we do not find a suitable binary, then try the user's path.
-
-
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor.  Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
-
-# AC_PROG_CPP_WERROR
-
-# Test for GNAT.
-# We require the gnatbind & gnatmake programs, as well as a compiler driver
-# that understands Ada.  We use the user's CC setting, already found, and
-# possibly add $1 to the command-line parameters.
-#
-# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND and GNATMAKE.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 
 
 
@@ -12947,7 +11149,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12950 "configure"
+#line 11152 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -13053,7 +11255,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 13056 "configure"
+#line 11258 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
diff --git a/sim/bpf/configure.ac b/sim/bpf/configure.ac
index e9df51a..4e08e2c 100644
--- a/sim/bpf/configure.ac
+++ b/sim/bpf/configure.ac
@@ -1,6 +1,6 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_INIT(Makefile.in)
-sinclude(../common/acinclude.m4)
+AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
 
 SIM_AC_COMMON