Move gnulib to top level

This patch moves the gdb/gnulib subdirectory to the top level.

It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this.  However, gdbserver still builds its own
copy of gnulib, just from the new source location.

A small hack was needed to ensure that gnulib is only built when gdb
is enabled.  The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.

Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.

Tested by the buildbot.

ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Add gnulib.
	* gnulib: New directory, move from gdb/gnulib.
	* configure.ac (host_libs): Add gnulib.
	* configure: Rebuild.
	* Makefile.def (host_modules, dependencies): Add gnulib.
	* Makefile.in: Rebuild.

gdb/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* gnulib: Move directory to top-level.
	* configure.ac: Don't configure gnulib.
	* configure: Rebuild.
	* common/common-defs.h: Use new path to gnulib.
	* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
	(GNULIB_H): Remove.
	(INCGNU): Look in new gnulib location.
	(HFILES_NO_SRCDIR): Remove gnulib files.
	(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
	(generated_files): Remove GNULIB_H.
	($(LIBGNU), all-lib): Remove targets.
	(distclean): Don't mention GNULIB_BUILDDIR.
	($(GNULIB_BUILDDIR)/Makefile): Remove target.

gdb/gdbserver/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* configure.ac: Use new path to gnulib.
	* configure: Rebuild.
	* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
	to gnulib.

gnulib/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* update-gnulib.sh: Adjust paths.
	* Makefile.in: Adjust paths.
	* configure.ac: Adjust paths.  Use ACX_LARGEFILE.
	* configure: Rebuild.

1 files changed, 117 insertions, 0 deletions

diff --git a/gnulib/import/m4/dup2.m4 b/gnulib/import/m4/dup2.m4
new file mode 100644
index 0000000..5b68312
--- /dev/null
+++ b/gnulib/import/m4/dup2.m4
@@ -0,0 +1,117 @@
+#serial 25
+dnl Copyright (C) 2002, 2005, 2007, 2009-2016 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_FUNC_DUP2],
+[
+  AC_REQUIRE([gl_UNISTD_H_DEFAULTS])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  m4_ifdef([gl_FUNC_DUP2_OBSOLETE], [
+    AC_CHECK_FUNCS_ONCE([dup2])
+    if test $ac_cv_func_dup2 = no; then
+      HAVE_DUP2=0
+    fi
+  ], [
+    AC_DEFINE([HAVE_DUP2], [1], [Define to 1 if you have the 'dup2' function.])
+  ])
+  if test $HAVE_DUP2 = 1; then
+    AC_CACHE_CHECK([whether dup2 works], [gl_cv_func_dup2_works],
+      [AC_RUN_IFELSE([
+         AC_LANG_PROGRAM(
+           [[#include <errno.h>
+             #include <fcntl.h>
+             #include <limits.h>
+             #include <sys/resource.h>
+             #include <unistd.h>
+             #ifndef RLIM_SAVED_CUR
+             # define RLIM_SAVED_CUR RLIM_INFINITY
+             #endif
+             #ifndef RLIM_SAVED_MAX
+             # define RLIM_SAVED_MAX RLIM_INFINITY
+             #endif
+           ]],
+           [[int result = 0;
+             int bad_fd = INT_MAX;
+             struct rlimit rlim;
+             if (getrlimit (RLIMIT_NOFILE, &rlim) == 0
+                 && 0 <= rlim.rlim_cur && rlim.rlim_cur <= INT_MAX
+                 && rlim.rlim_cur != RLIM_INFINITY
+                 && rlim.rlim_cur != RLIM_SAVED_MAX
+                 && rlim.rlim_cur != RLIM_SAVED_CUR)
+               bad_fd = rlim.rlim_cur;
+             #ifdef FD_CLOEXEC
+               if (fcntl (1, F_SETFD, FD_CLOEXEC) == -1)
+                 result |= 1;
+             #endif
+             if (dup2 (1, 1) != 1)
+               result |= 2;
+             #ifdef FD_CLOEXEC
+               if (fcntl (1, F_GETFD) != FD_CLOEXEC)
+                 result |= 4;
+             #endif
+             close (0);
+             if (dup2 (0, 0) != -1)
+               result |= 8;
+             /* Many gnulib modules require POSIX conformance of EBADF.  */
+             if (dup2 (2, bad_fd) == -1 && errno != EBADF)
+               result |= 16;
+             /* Flush out some cygwin core dumps.  */
+             if (dup2 (2, -1) != -1 || errno != EBADF)
+               result |= 32;
+             dup2 (2, 255);
+             dup2 (2, 256);
+             /* On OS/2 kLIBC, dup2() does not work on a directory fd.  */
+             {
+               int fd = open (".", O_RDONLY);
+               if (fd == -1)
+                 result |= 64;
+               else if (dup2 (fd, fd + 1) == -1)
+                 result |= 128;
+
+               close (fd);
+             }
+             return result;]])
+        ],
+        [gl_cv_func_dup2_works=yes], [gl_cv_func_dup2_works=no],
+        [case "$host_os" in
+           mingw*) # on this platform, dup2 always returns 0 for success
+             gl_cv_func_dup2_works="guessing no" ;;
+           cygwin*) # on cygwin 1.5.x, dup2(1,1) returns 0
+             gl_cv_func_dup2_works="guessing no" ;;
+           aix* | freebsd*)
+                   # on AIX 7.1 and FreeBSD 6.1, dup2 (1,toobig) gives EMFILE,
+                   # not EBADF.
+             gl_cv_func_dup2_works="guessing no" ;;
+           haiku*) # on Haiku alpha 2, dup2(1, 1) resets FD_CLOEXEC.
+             gl_cv_func_dup2_works="guessing no" ;;
+           *-android*) # implemented using dup3(), which fails if oldfd == newfd
+             gl_cv_func_dup2_works="guessing no" ;;
+           os2*) # on OS/2 kLIBC, dup2() does not work on a directory fd.
+             gl_cv_func_dup2_works="guessing no" ;;
+           *) gl_cv_func_dup2_works="guessing yes" ;;
+         esac])
+      ])
+    case "$gl_cv_func_dup2_works" in
+      *yes) ;;
+      *)
+        REPLACE_DUP2=1
+        AC_CHECK_FUNCS([setdtablesize])
+        ;;
+    esac
+  fi
+  dnl Replace dup2() for supporting the gnulib-defined fchdir() function,
+  dnl to keep fchdir's bookkeeping up-to-date.
+  m4_ifdef([gl_FUNC_FCHDIR], [
+    gl_TEST_FCHDIR
+    if test $HAVE_FCHDIR = 0; then
+      if test $HAVE_DUP2 = 1; then
+        REPLACE_DUP2=1
+      fi
+    fi
+  ])
+])
+
+# Prerequisites of lib/dup2.c.
+AC_DEFUN([gl_PREREQ_DUP2], [])