Replace occurrances of 'Hitachi' with 'Renesas'.

15 files changed, 74 insertions, 60 deletions

diff --git a/gas/ChangeLog b/gas/ChangeLog
index 3300a8d..639b744 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,20 @@
+2003-04-15  Rohit Kumar Srivastava <rohits@kpitcummins.com>
+
+	* doc/c-h8300.texi: Replace occurrances of 'Hitachi' with
+	'Renesas'.
+	* doc/c-h8500.texi: Likewise.
+	* doc/c-sh.texi: Likewise.
+	* doc/c-sh64.texi: Likewise.
+	* doc/h8.texi: Likewise.
+	* config/tc-h8300.c: Likewise.
+	* config/tc-h8300.h: Likewise.
+	* config/tc-h8500.c: Likewise.
+	* config/tc-h8500.h: Likewise.
+	* config/tc-sh.c: Likewise.
+	* config/tc-sh.h: Likewise.
+	* config/tc-sh64.c: Likewise.
+	* config/tc-sh64.h: Likewise.
+
 2003-04-10  Alexandre Oliva  <aoliva@redhat.com>
 
 	* config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): New.
diff --git a/gas/config/tc-h8300.c b/gas/config/tc-h8300.c
index 5ec7678..21051e0 100644
--- a/gas/config/tc-h8300.c
+++ b/gas/config/tc-h8300.c
@@ -1,6 +1,6 @@
-/* tc-h8300.c -- Assemble code for the Hitachi H8/300
+/* tc-h8300.c -- Assemble code for the Renesas H8/300
    Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000,
-   2001, 2002 Free Software Foundation, Inc.
+   2001, 2002, 2003 Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
 
@@ -51,7 +51,7 @@ int Smode;
 #define DMODE (L_16)
 #define DSYMMODE (Hmode ? L_24 : L_16)
 
-int bsize = L_8;		/* default branch displacement */
+int bsize = L_8;		/* Default branch displacement.  */
 
 struct h8_instruction
 {
diff --git a/gas/config/tc-h8300.h b/gas/config/tc-h8300.h
index b99d1db..2da3f66 100644
--- a/gas/config/tc-h8300.h
+++ b/gas/config/tc-h8300.h
@@ -1,6 +1,6 @@
 /* This file is tc-h8300.h
    Copyright 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
-   1997, 1998, 2000, 2002
+   1997, 1998, 2000, 2002, 2003
    Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
@@ -84,7 +84,7 @@ extern void tc_reloc_mangle
 #define TC_CONS_RELOC          (Hmode ? R_RELLONG: R_RELWORD)
 
 #define DO_NOT_STRIP 0
-#define LISTING_HEADER "Hitachi H8/300 GAS "
+#define LISTING_HEADER "Renesas H8/300 GAS "
 #define NEED_FX_R_TYPE 1
 #ifndef OBJ_ELF
 #define RELOC_32 1234
diff --git a/gas/config/tc-h8500.c b/gas/config/tc-h8500.c
index a013595..cd4d76f 100644
--- a/gas/config/tc-h8500.c
+++ b/gas/config/tc-h8500.c
@@ -1,5 +1,5 @@
-/* tc-h8500.c -- Assemble code for the Hitachi H8/500
-   Copyright 1993, 1994, 1995, 1998, 2000, 2001, 2002
+/* tc-h8500.c -- Assemble code for the Renesas H8/500
+   Copyright 1993, 1994, 1995, 1998, 2000, 2001, 2002, 2003
    Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
diff --git a/gas/config/tc-h8500.h b/gas/config/tc-h8500.h
index 4d96aef..5902524 100644
--- a/gas/config/tc-h8500.h
+++ b/gas/config/tc-h8500.h
@@ -1,5 +1,5 @@
 /* This file is tc-h8500.h
-   Copyright 1993, 1995, 1997, 1998, 2000 Free Software Foundation, Inc.
+   Copyright 1993, 1995, 1997, 1998, 2000, 2003 Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
 
@@ -41,7 +41,7 @@ extern void tc_reloc_mangle
   PARAMS ((struct fix *, struct internal_reloc *, bfd_vma));
 
 #define DO_NOT_STRIP 0
-#define LISTING_HEADER "Hitachi H8/500 GAS "
+#define LISTING_HEADER "Renesas H8/500 GAS "
 #define NEED_FX_R_TYPE 1
 #define RELOC_32 1234
 
diff --git a/gas/config/tc-sh.c b/gas/config/tc-sh.c
index c73b81f..1303d23 100644
--- a/gas/config/tc-sh.c
+++ b/gas/config/tc-sh.c
@@ -1,4 +1,4 @@
-/* tc-sh.c -- Assemble code for the Hitachi Super-H
+/* tc-sh.c -- Assemble code for the Renesas Super-H
    Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    Free Software Foundation, Inc.
 
diff --git a/gas/config/tc-sh.h b/gas/config/tc-sh.h
index b1c9bc0..bc619c7 100644
--- a/gas/config/tc-sh.h
+++ b/gas/config/tc-sh.h
@@ -101,7 +101,7 @@ extern long md_pcrel_from_section PARAMS ((struct fix *, segT));
 
 #define LISTING_HEADER \
   (!target_big_endian \
-   ? "Hitachi Super-H GAS Little Endian" : "Hitachi Super-H GAS Big Endian")
+   ? "Renesas Super-H GAS Little Endian" : "Renesas Super-H GAS Big Endian")
 
 #define md_operand(x)
 
diff --git a/gas/config/tc-sh64.c b/gas/config/tc-sh64.c
index aa5f71e..9b2c9d6 100644
--- a/gas/config/tc-sh64.c
+++ b/gas/config/tc-sh64.c
@@ -1,4 +1,4 @@
-/* tc-sh64.c -- Assemble code for the Hitachi Super-H SHcompact and SHmedia.
+/* tc-sh64.c -- Assemble code for the Renesas Super-H SHcompact and SHmedia.
    Copyright 2000, 2001, 2002, 2003 Free Software Foundation.
 
    This file is part of GAS, the GNU Assembler.
diff --git a/gas/config/tc-sh64.h b/gas/config/tc-sh64.h
index 1fb8e76..f04f3ec 100644
--- a/gas/config/tc-sh64.h
+++ b/gas/config/tc-sh64.h
@@ -37,8 +37,8 @@ extern int sh64_max_mem_for_rs_align_code PARAMS ((void));
 #undef  LISTING_HEADER
 #define LISTING_HEADER					\
   (target_big_endian ?					\
-     "Hitachi SHcompact/SHmedia Big Endian GAS"		\
-   : "Hitachi SHcompact/SHmedia Little Endian GAS")
+     "Renesas SHcompact/SHmedia Big Endian GAS"		\
+   : "Renesas SHcompact/SHmedia Little Endian GAS")
 
 /* We need to record the new frag position after an .align.  */
 extern void sh64_do_align PARAMS ((int, const char *, int, int));
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index 5f95c96..e184ff5 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -324,7 +324,7 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}.
    [@b{-O}|@b{-n}|@b{-N}]
 @end ifset
 @ifset H8
-@c Hitachi family chips have no machine-dependent assembler options
+@c Renesas family chips have no machine-dependent assembler options
 @end ifset
 @ifset HPPA
 @c HPPA has no machine-dependent assembler options (yet).
@@ -1148,16 +1148,16 @@ machine architecture manual for this information.
 @ifclear GENERIC
 @ifset H8/300
 For information on the H8/300 machine instruction set, see @cite{H8/300
-Series Programming Manual} (Hitachi ADE--602--025).  For the H8/300H,
-see @cite{H8/300H Series Programming Manual} (Hitachi).
+Series Programming Manual}.  For the H8/300H, see @cite{H8/300H Series
+Programming Manual} (Renesas).
 @end ifset
 @ifset H8/500
 For information on the H8/500 machine instruction set, see @cite{H8/500
-Series Programming Manual} (Hitachi M21T001).
+Series Programming Manual} (Renesas M21T001).
 @end ifset
 @ifset SH
-For information on the Hitachi SH machine instruction set, see
-@cite{SH-Microcomputer User's Manual} (Hitachi Micro Systems, Inc.).
+For information on the Renesas (formerly Hitachi) SH machine instruction set,
+see @cite{SH-Microcomputer User's Manual} (Renesas).
 @end ifset
 @ifset Z8000
 For information on the Z8000 machine instruction set, see @cite{Z8000 CPU Technical Manual}
@@ -2086,7 +2086,7 @@ is considered a comment and is ignored.  The line comment character is
 @samp{;} for Motorola PowerPC;
 @end ifset
 @ifset SH
-@samp{!} for the Hitachi SH;
+@samp{!} for the Renesas SH;
 @end ifset
 @ifset SPARC
 @samp{!} on the SPARC;
@@ -2213,7 +2213,7 @@ constants are an exception: they do not end statements.
 @ifset H8
 A @dfn{statement} ends at a newline character (@samp{\n}); or (for the
 H8/300) a dollar sign (@samp{$}); or (for the
-Hitachi-SH or the
+Renesas-SH or the
 H8/500) a semicolon
 (@samp{;}).  The newline or separator character is considered part of
 the preceding statement.  Newlines and separators within character
@@ -2438,8 +2438,7 @@ grave accent.  A newline
 @end ifset
 @ifset H8
 (or dollar sign @samp{$}, for the H8/300; or semicolon @samp{;} for the
-Hitachi SH or
-H8/500)
+Renesas SH or H8/500)
 @end ifset
 @end ifset
 @end ifclear
@@ -2543,7 +2542,7 @@ A letter, to tell @command{@value{AS}} the rest of the number is a flonum.
 @end ignore
 
 On the H8/300, H8/500,
-Hitachi SH,
+Renesas SH,
 and AMD 29K architectures, the letter must be
 one of the letters @samp{DFPRSX} (in upper or lower case).
 
@@ -2680,7 +2679,7 @@ the task of adjusting mentions of object-file addresses so they refer to
 the proper run-time addresses.
 @ifset H8
 For the H8/300 and H8/500,
-and for the Hitachi SH,
+and for the Renesas SH,
 @command{@value{AS}} pads sections if needed to
 ensure they end on a word (sixteen bit) boundary.
 @end ifset
@@ -2974,7 +2973,7 @@ of @command{@value{AS}}.)
 @ifset H8
 On the H8/300 and H8/500 platforms, each subsection is zero-padded to a word
 boundary (two bytes).
-The same is true on the Hitachi SH.
+The same is true on the Renesas SH.
 @end ifset
 @ifset I960
 @c FIXME section padding (alignment)?
@@ -3131,10 +3130,9 @@ body of a symbol name, though not at its beginning.
 @ifset SPECIAL-SYMS
 @ifset H8
 Symbol names begin with a letter or with one of @samp{._}.  On the
-Hitachi SH or the
-H8/500, you can also use @code{$} in symbol names.  That character may
-be followed by any string of digits, letters, dollar signs (save on the
-H8/300), and underscores.
+Renesas SH or the H8/500, you can also use @code{$} in symbol names.  That
+character may be followed by any string of digits, letters, dollar signs (save
+on the H8/300), and underscores.
 @end ifset
 @end ifset
 
@@ -3884,7 +3882,7 @@ required alignment; this can be useful if you want the alignment to be filled
 with no-op instructions when appropriate.
 
 The way the required alignment is specified varies from system to system.
-For the a29k, hppa, m68k, m88k, w65, sparc, Xtensa, and Hitachi SH, and i386 using ELF
+For the a29k, hppa, m68k, m88k, w65, sparc, Xtensa, and Renesas SH, and i386 using ELF
 format,
 the first expression is the
 alignment request in bytes.  For example @samp{.align 8} advances
@@ -4461,7 +4459,7 @@ of target the assembly is for.
 @ifclear GENERIC
 @ifset H8
 On the H8/500 and most forms of the H8/300, @code{.int} emits 16-bit
-integers.  On the H8/300H and the Hitachi SH, however, @code{.int} emits
+integers.  On the H8/300H and the Renesas SH, however, @code{.int} emits
 32-bit integers.
 @end ifset
 @end ifclear
@@ -5849,10 +5847,10 @@ subject, see the hardware manufacturer's manual.
 * D30V-Dependent::              D30V Dependent Features
 @end ifset
 @ifset H8/300
-* H8/300-Dependent::            Hitachi H8/300 Dependent Features
+* H8/300-Dependent::            Renesas H8/300 Dependent Features
 @end ifset
 @ifset H8/500
-* H8/500-Dependent::            Hitachi H8/500 Dependent Features
+* H8/500-Dependent::            Renesas H8/500 Dependent Features
 @end ifset
 @ifset HPPA
 * HPPA-Dependent::              HPPA Dependent Features
@@ -5894,8 +5892,8 @@ subject, see the hardware manufacturer's manual.
 * MSP430-Dependent::		MSP430 Dependent Features
 @end ifset
 @ifset SH
-* SH-Dependent::                Hitachi SH Dependent Features
-* SH64-Dependent::              Hitachi SH64 Dependent Features
+* SH-Dependent::                Renesas SH Dependent Features
+* SH64-Dependent::              Renesas SH64 Dependent Features
 @end ifset
 @ifset PDP11
 * PDP-11-Dependent::            PDP-11 Dependent Features
@@ -5957,20 +5955,20 @@ subject, see the hardware manufacturer's manual.
 @include c-cris.texi
 @end ifset
 
-@ifset Hitachi-all
+@ifset Renesas-all
 @ifclear GENERIC
 @node Machine Dependencies
 @chapter Machine Dependent Features
 
-The machine instruction sets are different on each Hitachi chip family,
+The machine instruction sets are different on each Renesas chip family,
 and there are also some syntax differences among the families.  This
 chapter describes the specific @command{@value{AS}} features for each
 family.
 
 @menu
-* H8/300-Dependent::            Hitachi H8/300 Dependent Features
-* H8/500-Dependent::            Hitachi H8/500 Dependent Features
-* SH-Dependent::                Hitachi SH Dependent Features
+* H8/300-Dependent::            Renesas H8/300 Dependent Features
+* H8/500-Dependent::            Renesas H8/500 Dependent Features
+* SH-Dependent::                Renesas SH Dependent Features
 @end menu
 @lowersections
 @end ifclear
@@ -6345,7 +6343,7 @@ Keith Knowles at the Open Software Foundation wrote the original MIPS back end
 (which hasn't been merged in yet).  Ralph Campbell worked with the MIPS code to
 support a.out format.
 
-Support for the Zilog Z8k and Hitachi H8/300 and H8/500 processors (tc-z8k,
+Support for the Zilog Z8k and Renesas H8/300 and H8/500 processors (tc-z8k,
 tc-h8300, tc-h8500), and IEEE 695 object file format (obj-ieee), was written by
 Steve Chamberlain of Cygnus Support.  Steve also modified the COFF back end to
 use BFD for some low-level operations, for use with the H8/300 and AMD 29k
diff --git a/gas/doc/c-h8300.texi b/gas/doc/c-h8300.texi
index a270918..cf3c213 100644
--- a/gas/doc/c-h8300.texi
+++ b/gas/doc/c-h8300.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+@c Copyright (C) 1991, 1992, 1993, 1994, 1995, 2003 Free Software Foundation, Inc.
 @c This is part of the GAS manual.
 @c For copying conditions, see the file as.texinfo.
 @ifset GENERIC
@@ -21,8 +21,8 @@
 
 @cindex H8/300 options (none)
 @cindex options, H8/300 (none)
-@code{@value{AS}} has no additional command-line options for the Hitachi
-H8/300 family.
+@code{@value{AS}} has no additional command-line options for the
+Renesas (formerly Hitachi) H8/300 family.
 
 @node H8/300 Syntax
 @section Syntax
@@ -156,9 +156,8 @@ generate 16-bit numbers.
 @cindex mnemonics, H8/300
 @cindex instruction summary, H8/300
 For detailed information on the H8/300 machine instruction set, see
-@cite{H8/300 Series Programming Manual} (Hitachi ADE--602--025).  For
-information specific to the H8/300H, see @cite{H8/300H Series
-Programming Manual} (Hitachi).
+@cite{H8/300 Series Programming Manual}.  For information specific to
+the H8/300H, see @cite{H8/300H Series Programming Manual} (Renesas).
 
 @code{@value{AS}} implements all the standard H8/300 opcodes.  No additional
 pseudo-instructions are needed on this family.
diff --git a/gas/doc/c-h8500.texi b/gas/doc/c-h8500.texi
index 10f0e64..f0e071c 100644
--- a/gas/doc/c-h8500.texi
+++ b/gas/doc/c-h8500.texi
@@ -19,8 +19,8 @@
 
 @cindex H8/500 options (none)
 @cindex options, H8/500 (none)
-@code{@value{AS}} has no additional command-line options for the Hitachi
-H8/500 family.
+@code{@value{AS}} has no additional command-line options for the
+Renesas (formerly Hitachi) H8/500 family.
 
 @node H8/500 Syntax
 @section Syntax
@@ -153,7 +153,7 @@ generate 16-bit numbers.
 @cindex mnemonics, H8/500
 @cindex instruction summary, H8/500
 For detailed information on the H8/500 machine instruction set, see
-@cite{H8/500 Series Programming Manual} (Hitachi M21T001).
+@cite{H8/500 Series Programming Manual} (Renesas M21T001).
 
 @code{@value{AS}} implements all the standard H8/500 opcodes.  No additional
 pseudo-instructions are needed on this family.
diff --git a/gas/doc/c-sh.texi b/gas/doc/c-sh.texi
index df31844..30ef85e 100644
--- a/gas/doc/c-sh.texi
+++ b/gas/doc/c-sh.texi
@@ -4,7 +4,7 @@
 @c For copying conditions, see the file as.texinfo.
 @page
 @node SH-Dependent
-@chapter Hitachi SH Dependent Features
+@chapter Renesas SH Dependent Features
 
 @cindex SH support
 @menu
@@ -20,8 +20,8 @@
 
 @cindex SH options
 @cindex options, SH
-@code{@value{AS}} has following command-line options for the Hitachi
-SH family.
+@code{@value{AS}} has following command-line options for the Renesas
+(formerly Hitachi) SH family.
 
 @table @code
 @kindex -little
@@ -183,7 +183,7 @@ with other development tools.
 @cindex mnemonics, SH
 @cindex instruction summary, SH
 For detailed information on the SH machine instruction set, see
-@cite{SH-Microcomputer User's Manual} (Hitachi Micro Systems, Inc.).
+@cite{SH-Microcomputer User's Manual} (Renesas).
 
 @code{@value{AS}} implements all the standard SH opcodes.  No additional
 pseudo-instructions are needed on this family.  Note, however, that
@@ -289,7 +289,7 @@ stc SR,Rn
 @end smallexample
 @end ifset
 
-@ifset Hitachi-all
+@ifset Renesas-all
 @ifclear GENERIC
 @raisesections
 @end ifclear
diff --git a/gas/doc/c-sh64.texi b/gas/doc/c-sh64.texi
index 0107ff3..9df346c 100644
--- a/gas/doc/c-sh64.texi
+++ b/gas/doc/c-sh64.texi
@@ -3,7 +3,7 @@
 @c For copying conditions, see the file as.texinfo.
 @page
 @node SH64-Dependent
-@chapter Hitachi SH64 Dependent Features
+@chapter Renesas SH64 Dependent Features
 
 @cindex SH64 support
 @menu
diff --git a/gas/doc/h8.texi b/gas/doc/h8.texi
index 0df1714..6eb02f8 100644
--- a/gas/doc/h8.texi
+++ b/gas/doc/h8.texi
@@ -6,7 +6,7 @@
 @clear BOUT
 @set COFF
 @clear ELF
-@set Hitachi-all
+@set Renesas-all
 @set H8/300
 @set H8/500
 @set SH
@@ -19,7 +19,7 @@
 @set GCC gcc
 @set LD ld
 @set TARGET H8/300 and H8/500
-@set TARGET H8/300, H8/500, and Hitachi SH
+@set TARGET H8/300, H8/500, and Renesas SH
 @set OBJ-NAME COFF
 @c
 @clear have-stabs