MIPS/opcodes: Free up redundant `g' operand code

In the operand handling rewrite made for the MIPS disassembler with
commit ab90248154ba ("Add structures to describe MIPS operands"),
<https://sourceware.org/ml/binutils/2013-07/msg00135.html>, the `g'
operand code has become redundant for the regular MIPS instruction set
by duplicating the OP_REG_COPRO semantics of the `G' operand code.

Later commit 351cdf24d223 ("Implement O32 FPXX, FP64 and FP64A ABI
extensions") converted the CTTC1 instruction from the `g' to the `G'
operand code, but still left a few instructions behind.

Convert the three remaining instructions still using the `g' code then,
namely: CTTC2, MTTC2 and MTTHC2, and remove all traces of the operand
code, freeing it up for other use.

	opcodes/
	* mips-opc.c (mips_builtin_opcodes): Switch "cttc2", "mttc2",
	and "mtthc2" to using the `G' rather than `g' operand code for
	the coprocessor control register referred.

	include/
	* opcode/mips.h: Complement change made to opcodes and remove
	references to the `g' regular MIPS ISA operand code.

4 files changed, 15 insertions, 6 deletions

diff --git a/include/ChangeLog b/include/ChangeLog
index 19dc8e3..b97775e 100644
--- a/include/ChangeLog
+++ b/include/ChangeLog
@@ -1,3 +1,8 @@
+2021-05-29  Maciej W. Rozycki  <macro@orcam.me.uk>
+
+	* opcode/mips.h: Complement change made to opcodes and remove
+	references to the `g' regular MIPS ISA operand code.
+
 2021-05-28  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR ld/27905
diff --git a/include/opcode/mips.h b/include/opcode/mips.h
index f72c5db..9fa9fcb 100644
--- a/include/opcode/mips.h
+++ b/include/opcode/mips.h
@@ -899,7 +899,6 @@ mips_opcode_32bit_p (const struct mips_opcode *mo)
    "$" 1 bit load high flag (OP_*_MT_H)
    "*" 2 bit dsp/smartmips accumulator register (OP_*_MTACC_T)
    "&" 2 bit dsp/smartmips accumulator register (OP_*_MTACC_D)
-   "g" 5 bit coprocessor 1 and 2 destination register (OP_*_RD)
    "+t" 5 bit coprocessor 0 destination register (OP_*_RT)
 
    MCU ASE usage:
@@ -1001,7 +1000,7 @@ mips_opcode_32bit_p (const struct mips_opcode *mo)
    "1234567890"
    "%[]<>(),+-:'@!#$*&\~"
    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-   "abcdefghijklopqrstuvwxz"
+   "abcdef hijkl  opqrstuvwx z"
 
    Extension character sequences used so far ("+" followed by the
    following), for quick reference when adding more:
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 48c62e8..f81b2f7 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,5 +1,11 @@
 2021-05-29  Maciej W. Rozycki  <macro@orcam.me.uk>
 
+	* mips-opc.c (mips_builtin_opcodes): Switch "cttc2", "mttc2",
+	and "mtthc2" to using the `G' rather than `g' operand code for
+	the coprocessor control register referred.
+
+2021-05-29  Maciej W. Rozycki  <macro@orcam.me.uk>
+
 	* micromips-opc.c (micromips_opcodes): Swap the two "dmtc1"
 	entries with each other.
 
diff --git a/opcodes/mips-opc.c b/opcodes/mips-opc.c
index 175f91a..373c362 100644
--- a/opcodes/mips-opc.c
+++ b/opcodes/mips-opc.c
@@ -195,7 +195,6 @@ decode_mips_operand (const char *p)
     case 'c': HINT (10, 16);
     case 'd': REG (5, 11, GP);
     case 'e': UINT (3, 22)
-    case 'g': REG (5, 11, COPRO);
     case 'h': HINT (5, 11);
     case 'i': HINT (16, 0);
     case 'j': SINT (16, 0);
@@ -997,7 +996,7 @@ const struct mips_opcode mips_builtin_opcodes[] =
 /* ctc3 is at the bottom of the table.  */
 {"cttc1",		"t,G",		0x41800023, 0xffe007ff, RD_1|WR_CC|TRAP|CM,	0,		0,		MT32,	0 },
 {"cttc1",		"t,S",		0x41800023, 0xffe007ff, RD_1|WR_CC|TRAP|CM,	0,		0,		MT32,	0 },
-{"cttc2",		"t,g",		0x41800025, 0xffe007ff,	RD_1|WR_CC|TRAP|CM,	0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
+{"cttc2",		"t,G",		0x41800025, 0xffe007ff,	RD_1|WR_CC|TRAP|CM,	0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
 {"cvt.d.l",		"D,S",		0x46a00021, 0xffff003f,	WR_1|RD_2|FP_D,		0,		I3_33,		0,	0 },
 {"cvt.d.s",		"D,S",		0x46000021, 0xffff003f,	WR_1|RD_2|FP_S|FP_D,	0,		I1,		0,	SF },
 {"cvt.d.w",		"D,S",		0x46800021, 0xffff003f,	WR_1|RD_2|FP_S|FP_D,	0,		I1,		0,	SF },
@@ -1556,14 +1555,14 @@ const struct mips_opcode mips_builtin_opcodes[] =
 {"mttc0",		"t,G,H",	0x41800000, 0xffe007f8, RD_1|WR_C0|WR_CC|TRAP|CM, 0,		0,		MT32,	0 },
 {"mttc1",		"t,S",		0x41800022, 0xffe007ff, RD_1|WR_2|TRAP|CM|FP_S, 0,		0,		MT32,	0 },
 {"mttc1",		"t,G",		0x41800022, 0xffe007ff, RD_1|WR_2|TRAP|CM|FP_S, 0,		0,		MT32,	0 },
-{"mttc2",		"t,g",		0x41800024, 0xffe007ff,	RD_1|WR_C2|WR_CC|TRAP|CM, 0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
+{"mttc2",		"t,G",		0x41800024, 0xffe007ff,	RD_1|WR_C2|WR_CC|TRAP|CM, 0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
 {"mttacx",		"t",		0x41801021, 0xffe0ffff, RD_1|WR_a|TRAP,		0,		0,		MT32,	0 },
 {"mttacx",		"t,&",		0x41801021, 0xffe09fff, RD_1|WR_a|TRAP,		0,		0,		MT32,	0 },
 {"mttdsp",		"t",		0x41808021, 0xffe0ffff, RD_1|TRAP,		0,		0,		MT32,	0 },
 {"mttgpr",		"t,d",		0x41800020, 0xffe007ff, RD_1|WR_2|TRAP,		0,		0,		MT32,	0 },
 {"mtthc1",		"t,S",		0x41800032, 0xffe007ff, RD_1|WR_2|TRAP|CM|FP_D, 0,		0,		MT32,	0 },
 {"mtthc1",		"t,G",		0x41800032, 0xffe007ff, RD_1|WR_2|TRAP|CM|FP_D, 0,		0,		MT32,	0 },
-{"mtthc2",		"t,g",		0x41800034, 0xffe007ff,	RD_1|WR_C2|WR_CC|TRAP|CM, 0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
+{"mtthc2",		"t,G",		0x41800034, 0xffe007ff,	RD_1|WR_C2|WR_CC|TRAP|CM, 0,		0,		MT32,	IOCT|IOCTP|IOCT2 },
 {"mtthi",		"t",		0x41800821, 0xffe0ffff, RD_1|WR_a|TRAP,		0,		0,		MT32,	0 },
 {"mtthi",		"t,&",		0x41800821, 0xffe09fff, RD_1|WR_a|TRAP,		0,		0,		MT32,	0 },
 {"mttlo",		"t",		0x41800021, 0xffe0ffff, RD_1|WR_a|TRAP,		0,		0,		MT32,	0 },