diff options
Diffstat (limited to 'linux-headers/include/linux/mdio.h')
| -rw-r--r-- | linux-headers/include/linux/mdio.h | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/linux-headers/include/linux/mdio.h b/linux-headers/include/linux/mdio.h index ecb81cd..c6bbe8a 100644 --- a/linux-headers/include/linux/mdio.h +++ b/linux-headers/include/linux/mdio.h @@ -45,10 +45,14 @@ #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ #define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ +#define MDIO_PCS_EEE_ABLE2 21 /* EEE Capability register 2 */ +#define MDIO_PMA_NG_EXTABLE 21 /* 2.5G/5G PMA/PMD extended ability */ #define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ #define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ #define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ +#define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */ +#define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ @@ -92,6 +96,10 @@ #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) /* 10PASS-TS/2BASE-TL */ #define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) +/* 2.5 Gb/s */ +#define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18) +/* 5 Gb/s */ +#define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c) /* Status register 1. */ #define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ @@ -115,6 +123,7 @@ /* Device present registers. */ #define MDIO_DEVS_PRESENT(devad) (1 << (devad)) +#define MDIO_DEVS_C22PRESENT MDIO_DEVS_PRESENT(0) #define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) #define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) #define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) @@ -123,6 +132,8 @@ #define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) #define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) #define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) +#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) +#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) /* Control register 2. */ #define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ @@ -142,6 +153,8 @@ #define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ #define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ +#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ +#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ @@ -195,6 +208,7 @@ #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ +#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ /* PHY XGXS lane state register. */ #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 @@ -231,9 +245,13 @@ #define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 /* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */ +#define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */ #define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ /* AN 10GBASE-T status register. */ +#define MDIO_AN_10GBT_STAT_LP2_5G 0x0020 /* LP is 2.5GBT capable */ +#define MDIO_AN_10GBT_STAT_LP5G 0x0040 /* LP is 5GBT capable */ #define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ #define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ #define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ @@ -261,6 +279,17 @@ #define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ #define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ #define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ +#define MDIO_EEE_40GR_FW 0x0100 /* 40G R fast wake */ +#define MDIO_EEE_40GR_DS 0x0200 /* 40G R deep sleep */ +#define MDIO_EEE_100GR_FW 0x1000 /* 100G R fast wake */ +#define MDIO_EEE_100GR_DS 0x2000 /* 100G R deep sleep */ + +#define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */ +#define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */ + +/* 2.5G/5G Extended abilities register. */ +#define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */ +#define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */ /* LASI RX_ALARM control/status registers. */ #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ @@ -295,4 +324,30 @@ static __inline__ __u16 mdio_phy_id_c45(int prtad, int devad) return MDIO_PHY_ID_C45 | (prtad << 5) | devad; } +/* UsxgmiiChannelInfo[15:0] for USXGMII in-band auto-negotiation.*/ +#define MDIO_USXGMII_EEE_CLK_STP 0x0080 /* EEE clock stop supported */ +#define MDIO_USXGMII_EEE 0x0100 /* EEE supported */ +#define MDIO_USXGMII_SPD_MASK 0x0e00 /* USXGMII speed mask */ +#define MDIO_USXGMII_FULL_DUPLEX 0x1000 /* USXGMII full duplex */ +#define MDIO_USXGMII_DPX_SPD_MASK 0x1e00 /* USXGMII duplex and speed bits */ +#define MDIO_USXGMII_10 0x0000 /* 10Mbps */ +#define MDIO_USXGMII_10HALF 0x0000 /* 10Mbps half-duplex */ +#define MDIO_USXGMII_10FULL 0x1000 /* 10Mbps full-duplex */ +#define MDIO_USXGMII_100 0x0200 /* 100Mbps */ +#define MDIO_USXGMII_100HALF 0x0200 /* 100Mbps half-duplex */ +#define MDIO_USXGMII_100FULL 0x1200 /* 100Mbps full-duplex */ +#define MDIO_USXGMII_1000 0x0400 /* 1000Mbps */ +#define MDIO_USXGMII_1000HALF 0x0400 /* 1000Mbps half-duplex */ +#define MDIO_USXGMII_1000FULL 0x1400 /* 1000Mbps full-duplex */ +#define MDIO_USXGMII_10G 0x0600 /* 10Gbps */ +#define MDIO_USXGMII_10GHALF 0x0600 /* 10Gbps half-duplex */ +#define MDIO_USXGMII_10GFULL 0x1600 /* 10Gbps full-duplex */ +#define MDIO_USXGMII_2500 0x0800 /* 2500Mbps */ +#define MDIO_USXGMII_2500HALF 0x0800 /* 2500Mbps half-duplex */ +#define MDIO_USXGMII_2500FULL 0x1800 /* 2500Mbps full-duplex */ +#define MDIO_USXGMII_5000 0x0a00 /* 5000Mbps */ +#define MDIO_USXGMII_5000HALF 0x0a00 /* 5000Mbps half-duplex */ +#define MDIO_USXGMII_5000FULL 0x1a00 /* 5000Mbps full-duplex */ +#define MDIO_USXGMII_LINK 0x8000 /* PHY link with copper-side partner */ + #endif /* __LINUX_MDIO_H__ */ |