diff options
Diffstat (limited to 'linux-headers/include/linux/bpf.h')
| -rw-r--r-- | linux-headers/include/linux/bpf.h | 399 |
1 files changed, 333 insertions, 66 deletions
diff --git a/linux-headers/include/linux/bpf.h b/linux-headers/include/linux/bpf.h index f6f4347..78c03b1 100644 --- a/linux-headers/include/linux/bpf.h +++ b/linux-headers/include/linux/bpf.h @@ -42,6 +42,7 @@ #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ #define BPF_JSLT 0xc0 /* SLT is signed, '<' */ #define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ +#define BPF_JCOND 0xe0 /* conditional pseudo jumps: may_goto, goto_or_nop */ #define BPF_CALL 0x80 /* function call */ #define BPF_EXIT 0x90 /* function return */ @@ -50,6 +51,13 @@ #define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ #define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ +#define BPF_LOAD_ACQ 0x100 /* load-acquire */ +#define BPF_STORE_REL 0x110 /* store-release */ + +enum bpf_cond_pseudo_jmp { + BPF_MAY_GOTO = 0, +}; + /* Register numbers */ enum { BPF_REG_0 = 0, @@ -77,12 +85,29 @@ struct bpf_insn { __s32 imm; /* signed immediate constant */ }; -/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ +/* Deprecated: use struct bpf_lpm_trie_key_u8 (when the "data" member is needed for + * byte access) or struct bpf_lpm_trie_key_hdr (when using an alternative type for + * the trailing flexible array member) instead. + */ struct bpf_lpm_trie_key { __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ __u8 data[0]; /* Arbitrary size */ }; +/* Header for bpf_lpm_trie_key structs */ +struct bpf_lpm_trie_key_hdr { + __u32 prefixlen; +}; + +/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry, with trailing byte array. */ +struct bpf_lpm_trie_key_u8 { + union { + struct bpf_lpm_trie_key_hdr hdr; + __u32 prefixlen; + }; + __u8 data[]; /* Arbitrary size */ +}; + struct bpf_cgroup_storage_key { __u64 cgroup_inode_id; /* cgroup inode id */ __u32 attach_type; /* program attach type (enum bpf_attach_type) */ @@ -617,7 +642,11 @@ union bpf_iter_link_info { * to NULL to begin the batched operation. After each subsequent * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant * *out_batch* as the *in_batch* for the next operation to - * continue iteration from the current point. + * continue iteration from the current point. Both *in_batch* and + * *out_batch* must point to memory large enough to hold a key, + * except for maps of type **BPF_MAP_TYPE_{HASH, PERCPU_HASH, + * LRU_HASH, LRU_PERCPU_HASH}**, for which batch parameters + * must be at least 4 bytes wide regardless of key size. * * The *keys* and *values* are output parameters which must point * to memory large enough to hold *count* items based on the key @@ -847,6 +876,36 @@ union bpf_iter_link_info { * Returns zero on success. On error, -1 is returned and *errno* * is set appropriately. * + * BPF_TOKEN_CREATE + * Description + * Create BPF token with embedded information about what + * BPF-related functionality it allows: + * - a set of allowed bpf() syscall commands; + * - a set of allowed BPF map types to be created with + * BPF_MAP_CREATE command, if BPF_MAP_CREATE itself is allowed; + * - a set of allowed BPF program types and BPF program attach + * types to be loaded with BPF_PROG_LOAD command, if + * BPF_PROG_LOAD itself is allowed. + * + * BPF token is created (derived) from an instance of BPF FS, + * assuming it has necessary delegation mount options specified. + * This BPF token can be passed as an extra parameter to various + * bpf() syscall commands to grant BPF subsystem functionality to + * unprivileged processes. + * + * When created, BPF token is "associated" with the owning + * user namespace of BPF FS instance (super block) that it was + * derived from, and subsequent BPF operations performed with + * BPF token would be performing capabilities checks (i.e., + * CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN) within + * that user namespace. Without BPF token, such capabilities + * have to be granted in init user namespace, making bpf() + * syscall incompatible with user namespace, for the most part. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * * NOTES * eBPF objects (maps and programs) can be shared between processes. * @@ -901,6 +960,8 @@ enum bpf_cmd { BPF_ITER_CREATE, BPF_LINK_DETACH, BPF_PROG_BIND_MAP, + BPF_TOKEN_CREATE, + __MAX_BPF_CMD, }; enum bpf_map_type { @@ -932,7 +993,14 @@ enum bpf_map_type { */ BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, - BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE is available to bpf programs + * attaching to a cgroup. The new mechanism (BPF_MAP_TYPE_CGRP_STORAGE + + * local percpu kptr) supports all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * functionality and more. So mark * BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * deprecated. + */ + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE = BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, BPF_MAP_TYPE_QUEUE, BPF_MAP_TYPE_STACK, BPF_MAP_TYPE_SK_STORAGE, @@ -944,6 +1012,8 @@ enum bpf_map_type { BPF_MAP_TYPE_BLOOM_FILTER, BPF_MAP_TYPE_USER_RINGBUF, BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_ARENA, + __MAX_BPF_MAP_TYPE }; /* Note that tracing related programs such as @@ -988,6 +1058,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ BPF_PROG_TYPE_NETFILTER, + __MAX_BPF_PROG_TYPE }; enum bpf_attach_type { @@ -1040,11 +1111,23 @@ enum bpf_attach_type { BPF_TCX_INGRESS, BPF_TCX_EGRESS, BPF_TRACE_UPROBE_MULTI, + BPF_CGROUP_UNIX_CONNECT, + BPF_CGROUP_UNIX_SENDMSG, + BPF_CGROUP_UNIX_RECVMSG, + BPF_CGROUP_UNIX_GETPEERNAME, + BPF_CGROUP_UNIX_GETSOCKNAME, + BPF_NETKIT_PRIMARY, + BPF_NETKIT_PEER, + BPF_TRACE_KPROBE_SESSION, + BPF_TRACE_UPROBE_SESSION, __MAX_BPF_ATTACH_TYPE }; #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE +/* Add BPF_LINK_TYPE(type, name) in bpf_types.h to keep bpf_link_type_strs[] + * in sync with the definitions below. + */ enum bpf_link_type { BPF_LINK_TYPE_UNSPEC = 0, BPF_LINK_TYPE_RAW_TRACEPOINT = 1, @@ -1059,9 +1142,13 @@ enum bpf_link_type { BPF_LINK_TYPE_NETFILTER = 10, BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, - MAX_BPF_LINK_TYPE, + BPF_LINK_TYPE_NETKIT = 13, + BPF_LINK_TYPE_SOCKMAP = 14, + __MAX_BPF_LINK_TYPE, }; +#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE + enum bpf_perf_event_type { BPF_PERF_EVENT_UNSPEC = 0, BPF_PERF_EVENT_UPROBE = 1, @@ -1123,6 +1210,7 @@ enum bpf_perf_event_type { #define BPF_F_BEFORE (1U << 3) #define BPF_F_AFTER (1U << 4) #define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6) #define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the @@ -1185,6 +1273,9 @@ enum bpf_perf_event_type { */ #define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6) +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_REG_INVARIANTS (1U << 7) + /* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */ @@ -1258,6 +1349,10 @@ enum { */ #define BPF_PSEUDO_KFUNC_CALL 2 +enum bpf_addr_space_cast { + BPF_ADDR_SPACE_CAST = 1, +}; + /* flags for BPF_MAP_UPDATE_ELEM command */ enum { BPF_ANY = 0, /* create new element or update existing */ @@ -1310,6 +1405,18 @@ enum { /* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ BPF_F_PATH_FD = (1U << 14), + +/* Flag for value_type_btf_obj_fd, the fd is available */ + BPF_F_VTYPE_BTF_OBJ_FD = (1U << 15), + +/* BPF token FD is passed in a corresponding command's token_fd field */ + BPF_F_TOKEN_FD = (1U << 16), + +/* When user space page faults in bpf_arena send SIGSEGV instead of inserting new page */ + BPF_F_SEGV_ON_FAULT = (1U << 17), + +/* Do not translate kernel bpf_arena pointers to user pointers */ + BPF_F_NO_USER_CONV = (1U << 18), }; /* Flags for BPF_PROG_QUERY. */ @@ -1326,6 +1433,8 @@ enum { #define BPF_F_TEST_RUN_ON_CPU (1U << 0) /* If set, XDP frames will be transmitted after processing */ #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) +/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */ +#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE (1U << 2) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { @@ -1381,11 +1490,23 @@ union bpf_attr { * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the * number of hash functions (if 0, the bloom filter will default * to using 5 hash functions). + * + * BPF_MAP_TYPE_ARENA - contains the address where user space + * is going to mmap() the arena. It has to be page aligned. */ __u64 map_extra; + + __s32 value_type_btf_obj_fd; /* fd pointing to a BTF + * type data for + * btf_vmlinux_value_type_id. + */ + /* BPF token FD to use with BPF_MAP_CREATE operation. + * If provided, map_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 map_token_fd; }; - struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ + struct { /* anonymous struct used by BPF_MAP_*_ELEM and BPF_MAP_FREEZE commands */ __u32 map_fd; __aligned_u64 key; union { @@ -1452,6 +1573,20 @@ union bpf_attr { * truncated), or smaller (if log buffer wasn't filled completely). */ __u32 log_true_size; + /* BPF token FD to use with BPF_PROG_LOAD operation. + * If provided, prog_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 prog_token_fd; + /* The fd_array_cnt can be used to pass the length of the + * fd_array array. In this case all the [map] file descriptors + * passed in this array will be bound to the program, even if + * the maps are not referenced directly. The functionality is + * similar to the BPF_PROG_BIND_MAP syscall, but maps can be + * used by the verifier during the program load. If provided, + * then the fd_array[0,...,fd_array_cnt-1] is expected to be + * continuous. + */ + __u32 fd_array_cnt; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -1517,6 +1652,7 @@ union bpf_attr { }; __u32 next_id; __u32 open_flags; + __s32 fd_by_id_token_fd; }; struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ @@ -1549,8 +1685,10 @@ union bpf_attr { } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ - __u64 name; - __u32 prog_fd; + __u64 name; + __u32 prog_fd; + __u32 :32; + __aligned_u64 cookie; } raw_tracepoint; struct { /* anonymous struct for BPF_BTF_LOAD */ @@ -1564,6 +1702,11 @@ union bpf_attr { * truncated), or smaller (if log buffer wasn't filled completely). */ __u32 btf_log_true_size; + __u32 btf_flags; + /* BPF token FD to use with BPF_BTF_LOAD operation. + * If provided, btf_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 btf_token_fd; }; struct { @@ -1644,6 +1787,13 @@ union bpf_attr { __u32 flags; __u32 pid; } uprobe_multi; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } netkit; }; } link_create; @@ -1687,6 +1837,11 @@ union bpf_attr { __u32 flags; /* extra flags */ } prog_bind_map; + struct { /* struct used by BPF_TOKEN_CREATE command */ + __u32 flags; + __u32 bpffs_fd; + } token_create; + } __attribute__((aligned(8))); /* The description below is an attempt at providing documentation to eBPF @@ -1834,15 +1989,21 @@ union bpf_attr { * program. * Return * The SMP id of the processor running the program. + * Attributes + * __bpf_fastcall * * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) * Description * Store *len* bytes from address *from* into the packet - * associated to *skb*, at *offset*. *flags* are a combination of - * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the - * checksum for the packet after storing the bytes) and - * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ - * **->swhash** and *skb*\ **->l4hash** to 0). + * associated to *skb*, at *offset*. The *flags* are a combination + * of the following values: + * + * **BPF_F_RECOMPUTE_CSUM** + * Automatically update *skb*\ **->csum** after storing the + * bytes. + * **BPF_F_INVALIDATE_HASH** + * Set *skb*\ **->hash**, *skb*\ **->swhash** and *skb*\ + * **->l4hash** to 0. * * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers @@ -1894,7 +2055,8 @@ union bpf_attr { * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and * for updates resulting in a null checksum the value is set to * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates - * the checksum is to be computed against a pseudo-header. + * that the modified header field is part of the pseudo-header. + * Flag **BPF_F_IPV6** should be set for IPv6 packets. * * This helper works in combination with **bpf_csum_diff**\ (), * which does not update the checksum in-place, but offers more @@ -2697,8 +2859,8 @@ union bpf_attr { * *bpf_socket* should be one of the following: * * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. - * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** - * and **BPF_CGROUP_INET6_CONNECT**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. * * This helper actually implements a subset of **setsockopt()**. * It supports the following *level*\ s: @@ -2715,7 +2877,7 @@ union bpf_attr { * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**, * **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**, * **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**, - * **TCP_BPF_RTO_MIN**. + * **TCP_BPF_RTO_MIN**, **TCP_BPF_SOCK_OPS_CB_FLAGS**. * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. * * **IPPROTO_IPV6**, which supports the following *optname*\ s: * **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**. @@ -2936,8 +3098,8 @@ union bpf_attr { * *bpf_socket* should be one of the following: * * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. - * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** - * and **BPF_CGROUP_INET6_CONNECT**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. * * This helper actually implements a subset of **getsockopt()**. * It supports the same set of *optname*\ s that is supported by @@ -2965,10 +3127,6 @@ union bpf_attr { * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration * option, and in this case it only works on functions tagged with * **ALLOW_ERROR_INJECTION** in the kernel code. - * - * Also, the helper is only available for the architectures having - * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing, - * x86 architecture is the only one to support this feature. * Return * 0 * @@ -3257,6 +3415,15 @@ union bpf_attr { * and *params*->smac will not be set as output. A common * use case is to call **bpf_redirect_neigh**\ () after * doing **bpf_fib_lookup**\ (). + * **BPF_FIB_LOOKUP_SRC** + * Derive and set source IP addr in *params*->ipv{4,6}_src + * for the nexthop. If the src addr cannot be derived, + * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this + * case, *params*->dmac and *params*->smac are not set either. + * **BPF_FIB_LOOKUP_MARK** + * Use the mark present in *params*->mark for the fib lookup. + * This option should not be used with BPF_FIB_LOOKUP_DIRECT, + * as it only has meaning for full lookups. * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -4490,6 +4657,8 @@ union bpf_attr { * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) * Description * Return a user or a kernel stack in bpf program provided buffer. + * Note: the user stack will only be populated if the *task* is + * the current task; all other tasks will return -EOPNOTSUPP. * To achieve this, the helper needs *task*, which is a valid * pointer to **struct task_struct**. To store the stacktrace, the * bpf program provides *buf* with a nonnegative *size*. @@ -4501,6 +4670,7 @@ union bpf_attr { * * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. + * The *task* must be the current task. * **BPF_F_USER_BUILD_ID** * Collect buildid+offset instead of ips for user stack, * only valid if **BPF_F_USER_STACK** is also specified. @@ -4803,10 +4973,13 @@ union bpf_attr { * the netns switch takes place from ingress to ingress without * going through the CPU's backlog queue. * + * *skb*\ **->mark** and *skb*\ **->tstamp** are not cleared during + * the netns switch. + * * The *flags* argument is reserved and must be 0. The helper is - * currently only supported for tc BPF program types at the ingress - * hook and for veth device types. The peer device must reside in a - * different network namespace. + * currently only supported for tc BPF program types at the + * ingress hook and for veth and netkit target device types. The + * peer device must reside in a different network namespace. * Return * The helper returns **TC_ACT_REDIRECT** on success or * **TC_ACT_SHOT** on error. @@ -4882,7 +5055,7 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * **-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if * invalid arguments are passed. * * struct socket *bpf_sock_from_file(struct file *file) @@ -5089,6 +5262,8 @@ union bpf_attr { * **BPF_F_TIMER_ABS** * Start the timer in absolute expire value instead of the * default relative one. + * **BPF_F_TIMER_CPU_PIN** + * Timer will be pinned to the CPU of the caller. * * Return * 0 on success. @@ -5219,7 +5394,7 @@ union bpf_attr { * Currently, the **flags** must be 0. Currently, nr_loops is * limited to 1 << 23 (~8 million) loops. * - * long (\*callback_fn)(u32 index, void \*ctx); + * long (\*callback_fn)(u64 index, void \*ctx); * * where **index** is the current index in the loop. The index * is zero-indexed. @@ -5366,14 +5541,15 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * **-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if * invalid arguments are passed. * - * void *bpf_kptr_xchg(void *map_value, void *ptr) + * void *bpf_kptr_xchg(void *dst, void *ptr) * Description - * Exchange kptr at pointer *map_value* with *ptr*, and return the - * old value. *ptr* can be NULL, otherwise it must be a referenced - * pointer which will be released when this helper is called. + * Exchange kptr at pointer *dst* with *ptr*, and return the old value. + * *dst* can be map value or local kptr. *ptr* can be NULL, otherwise + * it must be a referenced pointer which will be released when this helper + * is called. * Return * The old value of kptr (which can be NULL). The returned pointer * if not NULL, is a reference which must be released using its @@ -5856,7 +6032,10 @@ union bpf_attr { FN(user_ringbuf_drain, 209, ##ctx) \ FN(cgrp_storage_get, 210, ##ctx) \ FN(cgrp_storage_delete, 211, ##ctx) \ - /* */ + /* This helper list is effectively frozen. If you are trying to \ + * add a new helper, you should add a kfunc instead which has \ + * less stability guarantees. See Documentation/bpf/kfuncs.rst \ + */ /* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't * know or care about integer value that is now passed as second argument @@ -5894,11 +6073,7 @@ enum { BPF_F_PSEUDO_HDR = (1ULL << 4), BPF_F_MARK_MANGLED_0 = (1ULL << 5), BPF_F_MARK_ENFORCE = (1ULL << 6), -}; - -/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ -enum { - BPF_F_INGRESS = (1ULL << 0), + BPF_F_IPV6 = (1ULL << 7), }; /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ @@ -6047,10 +6222,12 @@ enum { BPF_F_BPRM_SECUREEXEC = (1ULL << 0), }; -/* Flags for bpf_redirect_map helper */ +/* Flags for bpf_redirect and bpf_redirect_map helpers */ enum { - BPF_F_BROADCAST = (1ULL << 3), - BPF_F_EXCLUDE_INGRESS = (1ULL << 4), + BPF_F_INGRESS = (1ULL << 0), /* used for skb path */ + BPF_F_BROADCAST = (1ULL << 3), /* used for XDP path */ + BPF_F_EXCLUDE_INGRESS = (1ULL << 4), /* used for XDP path */ +#define BPF_F_REDIRECT_FLAGS (BPF_F_INGRESS | BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS) }; #define __bpf_md_ptr(type, name) \ @@ -6059,12 +6236,17 @@ union { \ __u64 :64; \ } __attribute__((aligned(8))) +/* The enum used in skb->tstamp_type. It specifies the clock type + * of the time stored in the skb->tstamp. + */ enum { - BPF_SKB_TSTAMP_UNSPEC, - BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ - /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, - * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC - * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + BPF_SKB_TSTAMP_UNSPEC = 0, /* DEPRECATED */ + BPF_SKB_TSTAMP_DELIVERY_MONO = 1, /* DEPRECATED */ + BPF_SKB_CLOCK_REALTIME = 0, + BPF_SKB_CLOCK_MONOTONIC = 1, + BPF_SKB_CLOCK_TAI = 2, + /* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle, + * the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid. */ }; @@ -6450,7 +6632,7 @@ struct bpf_map_info { __u32 btf_id; __u32 btf_key_type_id; __u32 btf_value_type_id; - __u32 :32; /* alignment pad */ + __u32 btf_vmlinux_id; __u64 map_extra; } __attribute__((aligned(8))); @@ -6525,8 +6707,20 @@ struct bpf_link_info { __aligned_u64 addrs; __u32 count; /* in/out: kprobe_multi function count */ __u32 flags; + __u64 missed; + __aligned_u64 cookies; } kprobe_multi; struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 path_size; /* in/out: real path size on success, including zero byte */ + __u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */ + __u32 flags; + __u32 pid; + } uprobe_multi; + struct { __u32 type; /* enum bpf_perf_event_type */ __u32 :32; union { @@ -6534,20 +6728,28 @@ struct bpf_link_info { __aligned_u64 file_name; /* in/out */ __u32 name_len; __u32 offset; /* offset from file_name */ + __u64 cookie; + __u64 ref_ctr_offset; } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ struct { __aligned_u64 func_name; /* in/out */ __u32 name_len; __u32 offset; /* offset from func_name */ __u64 addr; + __u64 missed; + __u64 cookie; } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ struct { __aligned_u64 tp_name; /* in/out */ __u32 name_len; + __u32 :32; + __u64 cookie; } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ struct { __u64 config; __u32 type; + __u32 :32; + __u64 cookie; } event; /* BPF_PERF_EVENT_EVENT */ }; } perf_event; @@ -6555,6 +6757,14 @@ struct bpf_link_info { __u32 ifindex; __u32 attach_type; } tcx; + struct { + __u32 ifindex; + __u32 attach_type; + } netkit; + struct { + __u32 map_id; + __u32 attach_type; + } sockmap; }; } __attribute__((aligned(8))); @@ -6721,6 +6931,12 @@ enum { BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, }; +enum { + SK_BPF_CB_TX_TIMESTAMPING = 1<<0, + SK_BPF_CB_MASK = (SK_BPF_CB_TX_TIMESTAMPING - 1) | + SK_BPF_CB_TX_TIMESTAMPING +}; + /* List of known BPF sock_ops operators. * New entries can only be added at the end */ @@ -6773,6 +6989,8 @@ enum { * socket transition to LISTEN state. */ BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + * Arg1: measured RTT input (mrtt) + * Arg2: updated srtt */ BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. * It will be called to handle @@ -6831,6 +7049,29 @@ enum { * by the kernel or the * earlier bpf-progs. */ + BPF_SOCK_OPS_TSTAMP_SCHED_CB, /* Called when skb is passing + * through dev layer when + * SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SND_SW_CB, /* Called when skb is about to send + * to the nic when SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SND_HW_CB, /* Called in hardware phase when + * SK_BPF_CB_TX_TIMESTAMPING feature + * is on. + */ + BPF_SOCK_OPS_TSTAMP_ACK_CB, /* Called when all the skbs in the + * same sendmsg call are acked + * when SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SENDMSG_CB, /* Called when every sendmsg syscall + * is triggered. It's used to correlate + * sendmsg timestamp with corresponding + * tskey. + */ }; /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect @@ -6851,6 +7092,7 @@ enum { BPF_TCP_LISTEN, BPF_TCP_CLOSING, /* Now a valid state */ BPF_TCP_NEW_SYN_RECV, + BPF_TCP_BOUND_INACTIVE, BPF_TCP_MAX_STATES /* Leave at the end! */ }; @@ -6895,6 +7137,8 @@ enum { TCP_BPF_SYN = 1005, /* Copy the TCP header */ TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ + TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */ + SK_BPF_CB_FLAGS = 1009, /* Get or set sock ops flags in socket */ }; enum { @@ -6953,6 +7197,8 @@ enum { BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), BPF_FIB_LOOKUP_TBID = (1U << 3), + BPF_FIB_LOOKUP_SRC = (1U << 4), + BPF_FIB_LOOKUP_MARK = (1U << 5), }; enum { @@ -6965,6 +7211,7 @@ enum { BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ }; struct bpf_fib_lookup { @@ -6984,7 +7231,7 @@ struct bpf_fib_lookup { /* output: MTU value */ __u16 mtu_result; - }; + } __attribute__((packed, aligned(2))); /* input: L3 device index for lookup * output: device index from FIB lookup */ @@ -6999,6 +7246,9 @@ struct bpf_fib_lookup { __u32 rt_metric; }; + /* input: source address to consider for lookup + * output: source address result from lookup + */ union { __be32 ipv4_src; __u32 ipv6_src[4]; /* in6_addr; network order */ @@ -7026,8 +7276,19 @@ struct bpf_fib_lookup { __u32 tbid; }; - __u8 smac[6]; /* ETH_ALEN */ - __u8 dmac[6]; /* ETH_ALEN */ + union { + /* input */ + struct { + __u32 mark; /* policy routing */ + /* 2 4-byte holes for input */ + }; + + /* output: source and dest mac */ + struct { + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ + }; + }; }; struct bpf_redir_neigh { @@ -7111,40 +7372,35 @@ struct bpf_spin_lock { }; struct bpf_timer { - __u64 :64; - __u64 :64; + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_wq { + __u64 __opaque[2]; } __attribute__((aligned(8))); struct bpf_dynptr { - __u64 :64; - __u64 :64; + __u64 __opaque[2]; } __attribute__((aligned(8))); struct bpf_list_head { - __u64 :64; - __u64 :64; + __u64 __opaque[2]; } __attribute__((aligned(8))); struct bpf_list_node { - __u64 :64; - __u64 :64; - __u64 :64; + __u64 __opaque[3]; } __attribute__((aligned(8))); struct bpf_rb_root { - __u64 :64; - __u64 :64; + __u64 __opaque[2]; } __attribute__((aligned(8))); struct bpf_rb_node { - __u64 :64; - __u64 :64; - __u64 :64; - __u64 :64; + __u64 __opaque[4]; } __attribute__((aligned(8))); struct bpf_refcount { - __u32 :32; + __u32 __opaque[1]; } __attribute__((aligned(4))); struct bpf_sysctl { @@ -7300,9 +7556,11 @@ struct bpf_core_relo { * Flags to control bpf_timer_start() behaviour. * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is * relative to current time. + * - BPF_F_TIMER_CPU_PIN: Timer will be pinned to the CPU of the caller. */ enum { BPF_F_TIMER_ABS = (1ULL << 0), + BPF_F_TIMER_CPU_PIN = (1ULL << 1), }; /* BPF numbers iterator state */ @@ -7313,4 +7571,13 @@ struct bpf_iter_num { __u64 __opaque[1]; } __attribute__((aligned(8))); +/* + * Flags to control BPF kfunc behaviour. + * - BPF_F_PAD_ZEROS: Pad destination buffer with zeros. (See the respective + * helper documentation for details.) + */ +enum bpf_kfunc_flags { + BPF_F_PAD_ZEROS = (1ULL << 0), +}; + #endif /* __LINUX_BPF_H__ */ |