aboutsummaryrefslogtreecommitdiff
path: root/src/flash
diff options
context:
space:
mode:
Diffstat (limited to 'src/flash')
-rw-r--r--src/flash/nor/Makefile.am1
-rw-r--r--src/flash/nor/driver.h1
-rw-r--r--src/flash/nor/drivers.c1
-rw-r--r--src/flash/nor/mspm0.c1131
-rw-r--r--src/flash/nor/stm32l4x.c23
-rw-r--r--src/flash/nor/stm32l4x.h1
6 files changed, 1155 insertions, 3 deletions
diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am
index 8296877..147807f 100644
--- a/src/flash/nor/Makefile.am
+++ b/src/flash/nor/Makefile.am
@@ -45,6 +45,7 @@ NOR_DRIVERS = \
%D%/max32xxx.c \
%D%/mdr.c \
%D%/msp432.c \
+ %D%/mspm0.c \
%D%/mrvlqspi.c \
%D%/niietcm4.c \
%D%/non_cfi.c \
diff --git a/src/flash/nor/driver.h b/src/flash/nor/driver.h
index 852a55a..794566f 100644
--- a/src/flash/nor/driver.h
+++ b/src/flash/nor/driver.h
@@ -274,6 +274,7 @@ extern const struct flash_driver max32xxx_flash;
extern const struct flash_driver mdr_flash;
extern const struct flash_driver mrvlqspi_flash;
extern const struct flash_driver msp432_flash;
+extern const struct flash_driver mspm0_flash;
extern const struct flash_driver niietcm4_flash;
extern const struct flash_driver npcx_flash;
extern const struct flash_driver nrf51_flash;
diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c
index ce97b81..67d8624 100644
--- a/src/flash/nor/drivers.c
+++ b/src/flash/nor/drivers.c
@@ -51,6 +51,7 @@ static const struct flash_driver * const flash_drivers[] = {
&mdr_flash,
&mrvlqspi_flash,
&msp432_flash,
+ &mspm0_flash,
&niietcm4_flash,
&npcx_flash,
&nrf5_flash,
diff --git a/src/flash/nor/mspm0.c b/src/flash/nor/mspm0.c
new file mode 100644
index 0000000..4731c89
--- /dev/null
+++ b/src/flash/nor/mspm0.c
@@ -0,0 +1,1131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/***************************************************************************
+ * Copyright (C) 2023-2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * NOR flash driver for MSPM0L and MSPM0G class of uC from Texas Instruments.
+ *
+ * See:
+ * https://www.ti.com/microcontrollers-mcus-processors/arm-based-microcontrollers/arm-cortex-m0-mcus/overview.html
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include <helper/bits.h>
+#include <helper/time_support.h>
+
+/* MSPM0 Region memory map */
+#define MSPM0_FLASH_BASE_NONMAIN 0x41C00000
+#define MSPM0_FLASH_END_NONMAIN 0x41C00400
+#define MSPM0_FLASH_BASE_MAIN 0x0
+#define MSPM0_FLASH_BASE_DATA 0x41D00000
+
+/* MSPM0 FACTORYREGION registers */
+#define MSPM0_FACTORYREGION 0x41C40000
+#define MSPM0_TRACEID (MSPM0_FACTORYREGION + 0x000)
+#define MSPM0_DID (MSPM0_FACTORYREGION + 0x004)
+#define MSPM0_USERID (MSPM0_FACTORYREGION + 0x008)
+#define MSPM0_SRAMFLASH (MSPM0_FACTORYREGION + 0x018)
+
+/* MSPM0 FCTL registers */
+#define FLASH_CONTROL_BASE 0x400CD000
+#define FCTL_REG_DESC (FLASH_CONTROL_BASE + 0x10FC)
+#define FCTL_REG_CMDEXEC (FLASH_CONTROL_BASE + 0x1100)
+#define FCTL_REG_CMDTYPE (FLASH_CONTROL_BASE + 0x1104)
+#define FCTL_REG_CMDADDR (FLASH_CONTROL_BASE + 0x1120)
+#define FCTL_REG_CMDBYTEN (FLASH_CONTROL_BASE + 0x1124)
+#define FCTL_REG_CMDDATA0 (FLASH_CONTROL_BASE + 0x1130)
+#define FCTL_REG_CMDWEPROTA (FLASH_CONTROL_BASE + 0x11D0)
+#define FCTL_REG_CMDWEPROTB (FLASH_CONTROL_BASE + 0x11D4)
+#define FCTL_REG_CMDWEPROTNM (FLASH_CONTROL_BASE + 0x1210)
+#define FCTL_REG_STATCMD (FLASH_CONTROL_BASE + 0x13D0)
+
+/* FCTL_STATCMD[CMDDONE] Bits */
+#define FCTL_STATCMD_CMDDONE_MASK 0x00000001
+#define FCTL_STATCMD_CMDDONE_STATDONE 0x00000001
+
+/* FCTL_STATCMD[CMDPASS] Bits */
+#define FCTL_STATCMD_CMDPASS_MASK 0x00000002
+#define FCTL_STATCMD_CMDPASS_STATPASS 0x00000002
+
+/*
+ * FCTL_CMDEXEC Bits
+ * FCTL_CMDEXEC[VAL] Bits
+ */
+#define FCTL_CMDEXEC_VAL_EXECUTE 0x00000001
+
+/* FCTL_CMDTYPE[COMMAND] Bits */
+#define FCTL_CMDTYPE_COMMAND_PROGRAM 0x00000001
+#define FCTL_CMDTYPE_COMMAND_ERASE 0x00000002
+
+/* FCTL_CMDTYPE[SIZE] Bits */
+#define FCTL_CMDTYPE_SIZE_ONEWORD 0x00000000
+#define FCTL_CMDTYPE_SIZE_SECTOR 0x00000040
+
+/* FCTL_FEATURE_VER_B minimum */
+#define FCTL_FEATURE_VER_B 0xA
+
+#define MSPM0_MAX_PROTREGS 3
+
+#define MSPM0_FLASH_TIMEOUT_MS 8000
+#define ERR_STRING_MAX 255
+
+/* SYSCTL BASE */
+#define SYSCTL_BASE 0x400AF000
+#define SYSCTL_SECCFG_SECSTATUS (SYSCTL_BASE + 0x00003048)
+
+/* TI manufacturer ID */
+#define TI_MANUFACTURER_ID 0x17
+
+/* Defines for probe status */
+#define MSPM0_NO_ID_FOUND 0
+#define MSPM0_DEV_ID_FOUND 1
+#define MSPM0_DEV_PART_ID_FOUND 2
+
+struct mspm0_flash_bank {
+ /* chip id register */
+ uint32_t did;
+ /* Device Unique ID register */
+ uint32_t traceid;
+ unsigned char version;
+
+ const char *name;
+
+ /* Decoded flash information */
+ unsigned int data_flash_size_kb;
+ unsigned int main_flash_size_kb;
+ unsigned int main_flash_num_banks;
+ unsigned int sector_size;
+ /* Decoded SRAM information */
+ unsigned int sram_size_kb;
+
+ /* Flash word size: 64 bit = 8, 128bit = 16 bytes */
+ unsigned char flash_word_size_bytes;
+
+ /* Protection register stuff */
+ unsigned int protect_reg_base;
+ unsigned int protect_reg_count;
+
+ /* Flashctl version: A - CMDWEPROTA/B, B- CMDWEPROTB */
+ unsigned char flash_version;
+};
+
+struct mspm0_part_info {
+ const char *part_name;
+ unsigned short part;
+ unsigned char variant;
+};
+
+struct mspm0_family_info {
+ const char *family_name;
+ unsigned short part_num;
+ unsigned char part_count;
+ const struct mspm0_part_info *part_info;
+};
+
+/* https://www.ti.com/lit/ds/symlink/mspm0l1346.pdf Table 8-13 and so on */
+static const struct mspm0_part_info mspm0l_parts[] = {
+ { "MSPM0L1105TDGS20R", 0x51DB, 0x16 },
+ { "MSPM0L1105TDGS28R", 0x51DB, 0x83 },
+ { "MSPM0L1105TDYYR", 0x51DB, 0x54 },
+ { "MSPM0L1105TRGER", 0x51DB, 0x86 },
+ { "MSPM0L1105TRHBR", 0x51DB, 0x68 },
+ { "MSPM0L1106TDGS20R", 0x5552, 0x4B },
+ { "MSPM0L1106TDGS28R", 0x5552, 0x98 },
+ { "MSPM0L1106TDYYR", 0x5552, 0x9D },
+ { "MSPM0L1106TRGER", 0x5552, 0x90 },
+ { "MSPM0L1106TRHBR", 0x5552, 0x53 },
+ { "MSPM0L1303SRGER", 0xef0, 0x17 },
+ { "MSPM0L1303TRGER", 0xef0, 0xe2 },
+ { "MSPM0L1304QDGS20R", 0xd717, 0x91 },
+ { "MSPM0L1304QDGS28R", 0xd717, 0xb6 },
+ { "MSPM0L1304QDYYR", 0xd717, 0xa0 },
+ { "MSPM0L1304QRHBR", 0xd717, 0xa9 },
+ { "MSPM0L1304SDGS20R", 0xd717, 0xfa },
+ { "MSPM0L1304SDGS28R", 0xd717, 0x73 },
+ { "MSPM0L1304SDYYR", 0xd717, 0xb7 },
+ { "MSPM0L1304SRGER", 0xd717, 0x26 },
+ { "MSPM0L1304SRHBR", 0xd717, 0xe4 },
+ { "MSPM0L1304TDGS20R", 0xd717, 0x33 },
+ { "MSPM0L1304TDGS28R", 0xd717, 0xa8 },
+ { "MSPM0L1304TDYYR", 0xd717, 0xf9 },
+ { "MSPM0L1304TRGER", 0xd717, 0xb7 },
+ { "MSPM0L1304TRHBR", 0xd717, 0x5a },
+ { "MSPM0L1305QDGS20R", 0x4d03, 0xb7 },
+ { "MSPM0L1305QDGS28R", 0x4d03, 0x74 },
+ { "MSPM0L1305QDYYR", 0x4d03, 0xec },
+ { "MSPM0L1305QRHBR", 0x4d03, 0x78 },
+ { "MSPM0L1305SDGS20R", 0x4d03, 0xc7 },
+ { "MSPM0L1305SDGS28R", 0x4d03, 0x64 },
+ { "MSPM0L1305SDYYR", 0x4d03, 0x91 },
+ { "MSPM0L1305SRGER", 0x4d03, 0x73 },
+ { "MSPM0L1305SRHBR", 0x4d03, 0x2d },
+ { "MSPM0L1305TDGS20R", 0x4d03, 0xa0 },
+ { "MSPM0L1305TDGS28R", 0x4d03, 0xfb },
+ { "MSPM0L1305TDYYR", 0x4d03, 0xde },
+ { "MSPM0L1305TRGER", 0x4d03, 0xea },
+ { "MSPM0L1305TRHBR", 0x4d03, 0x85 },
+ { "MSPM0L1306QDGS20R", 0xbb70, 0x59 },
+ { "MSPM0L1306QDGS28R", 0xbb70, 0xf7 },
+ { "MSPM0L1306QDYYR", 0xbb70, 0x9f },
+ { "MSPM0L1306QRHBR", 0xbb70, 0xc2 },
+ { "MSPM0L1306SDGS20R", 0xbb70, 0xf4 },
+ { "MSPM0L1306SDGS28R", 0xbb70, 0x5 },
+ { "MSPM0L1306SDYYR", 0xbb70, 0xe },
+ { "MSPM0L1306SRGER", 0xbb70, 0x7f },
+ { "MSPM0L1306SRHBR", 0xbb70, 0x3c },
+ { "MSPM0L1306TDGS20R", 0xbb70, 0xa },
+ { "MSPM0L1306TDGS28R", 0xbb70, 0x63 },
+ { "MSPM0L1306TDYYR", 0xbb70, 0x35 },
+ { "MSPM0L1306TRGER", 0xbb70, 0xaa },
+ { "MSPM0L1306TRHBR", 0xbb70, 0x52 },
+ { "MSPM0L1343TDGS20R", 0xb231, 0x2e },
+ { "MSPM0L1344TDGS20R", 0x40b0, 0xd0 },
+ { "MSPM0L1345TDGS28R", 0x98b4, 0x74 },
+ { "MSPM0L1346TDGS28R", 0xf2b5, 0xef },
+};
+
+/* https://www.ti.com/lit/ds/symlink/mspm0g3506.pdf Table 8-20 */
+static const struct mspm0_part_info mspm0g_parts[] = {
+ { "MSPM0G1105TPTR", 0x8934, 0xD },
+ { "MSPM0G1105TRGZR", 0x8934, 0xFE },
+ { "MSPM0G1106TPMR", 0x477B, 0xD4 },
+ { "MSPM0G1106TPTR", 0x477B, 0x71 },
+ { "MSPM0G1106TRGZR", 0x477B, 0xBB },
+ { "MSPM0G1106TRHBR", 0x477B, 0x0 },
+ { "MSPM0G1107TDGS28R", 0x807B, 0x82 },
+ { "MSPM0G1107TPMR", 0x807B, 0xB3 },
+ { "MSPM0G1107TPTR", 0x807B, 0x32 },
+ { "MSPM0G1107TRGER", 0x807B, 0x79 },
+ { "MSPM0G1107TRGZR", 0x807B, 0x20 },
+ { "MSPM0G1107TRHBR", 0x807B, 0xBC },
+ { "MSPM0G1505SDGS28R", 0x13C4, 0x73 },
+ { "MSPM0G1505SPMR", 0x13C4, 0x53 },
+ { "MSPM0G1505SPTR", 0x13C4, 0x3E },
+ { "MSPM0G1505SRGER", 0x13C4, 0x47 },
+ { "MSPM0G1505SRGZR", 0x13C4, 0x34 },
+ { "MSPM0G1505SRHBR", 0x13C4, 0x30 },
+ { "MSPM0G1506SDGS28R", 0x5AE0, 0x3A },
+ { "MSPM0G1506SPMR", 0x5AE0, 0xF6 },
+ { "MSPM0G1506SRGER", 0x5AE0, 0x67 },
+ { "MSPM0G1506SRGZR", 0x5AE0, 0x75 },
+ { "MSPM0G1506SRHBR", 0x5AE0, 0x57 },
+ { "MSPM0G1507SDGS28R", 0x2655, 0x6D },
+ { "MSPM0G1507SPMR", 0x2655, 0x97 },
+ { "MSPM0G1507SRGER", 0x2655, 0x83 },
+ { "MSPM0G1507SRGZR", 0x2655, 0xD3 },
+ { "MSPM0G1507SRHBR", 0x2655, 0x4D },
+ { "MSPM0G3105SDGS20R", 0x4749, 0x21 },
+ { "MSPM0G3105SDGS28R", 0x4749, 0xDD },
+ { "MSPM0G3105SRHBR", 0x4749, 0xBE },
+ { "MSPM0G3106SDGS20R", 0x54C7, 0xD2 },
+ { "MSPM0G3106SDGS28R", 0x54C7, 0xB9 },
+ { "MSPM0G3106SRHBR", 0x54C7, 0x67 },
+ { "MSPM0G3107SDGS20R", 0xAB39, 0x5C },
+ { "MSPM0G3107SDGS28R", 0xAB39, 0xCC },
+ { "MSPM0G3107SRHBR", 0xAB39, 0xB7 },
+ { "MSPM0G3505SDGS28R", 0xc504, 0x8e },
+ { "MSPM0G3505SPMR", 0xc504, 0x1d },
+ { "MSPM0G3505SPTR", 0xc504, 0x93 },
+ { "MSPM0G3505SRGZR", 0xc504, 0xc7 },
+ { "MSPM0G3505SRHBR", 0xc504, 0xe7 },
+ { "MSPM0G3505TDGS28R", 0xc504, 0xdf },
+ { "MSPM0G3506SDGS28R", 0x151f, 0x8 },
+ { "MSPM0G3506SPMR", 0x151f, 0xd4 },
+ { "MSPM0G3506SPTR", 0x151f, 0x39 },
+ { "MSPM0G3506SRGZR", 0x151f, 0xfe },
+ { "MSPM0G3506SRHBR", 0x151f, 0xb5 },
+ { "MSPM0G3507SDGS28R", 0xae2d, 0xca },
+ { "MSPM0G3507SPMR", 0xae2d, 0xc7 },
+ { "MSPM0G3507SPTR", 0xae2d, 0x3f },
+ { "MSPM0G3507SRGZR", 0xae2d, 0xf7 },
+ { "MSPM0G3507SRHBR", 0xae2d, 0x4c },
+ { "M0G3107QPMRQ1", 0x4e2f, 0x51 },
+ { "M0G3107QPTRQ1", 0x4e2f, 0xc7},
+ { "M0G3107QRGZRQ1", 0x4e2f, 0x8a },
+ { "M0G3107QRHBRQ1", 0x4e2f, 0x9a},
+ { "M0G3107QDGS28RQ1", 0x4e2f, 0xd5},
+ { "M0G3107QDGS28RQ1", 0x4e2f, 0x67},
+ { "M0G3107QDGS20RQ1", 0x4e2f, 0xfd},
+ { "M0G3106QPMRQ1", 0x54C7, 0x08},
+ { "M0G3105QDGS32RQ1", 0x1349, 0x08},
+ { "M0G3106QPTRQ1", 0x54C7, 0x3F},
+ { "M0G3105QDGS28RQ1", 0x1349, 0x1B},
+ { "M0G3106QRGZRQ1", 0x94AD, 0xE6},
+ { "M0G3105QDGS20RQ1", 0x1349, 0xFB},
+ { "M0G3106QRHBRQ1", 0x94AD, 0x20},
+ { "M0G3106QDGS32RQ1", 0x94AD, 0x8D},
+ { "M0G3106QDGS28RQ1", 0x94AD, 0x03},
+ { "M0G3106QDGS20RQ1", 0x94AD, 0x6F},
+ { "M0G3105QPMRQ1", 0x1349, 0xD0},
+ { "M0G3105QPTRQ1", 0x1349, 0xEF},
+ { "M0G3105QRGZRQ1", 0x1349, 0x70},
+ { "M0G3105QRHBRQ1", 0x1349, 0x01},
+};
+
+/* https://www.ti.com/lit/gpn/mspm0c1104 Table 8-12 and so on */
+static const struct mspm0_part_info mspm0c_parts[] = {
+ { "MSPS003F4SPW20R", 0x57b3, 0x70},
+ { "MSPM0C1104SDGS20R", 0x57b3, 0x71},
+ { "MSPM0C1104SRUKR", 0x57b3, 0x73},
+ { "MSPM0C1104SDYYR", 0x57b3, 0x75},
+ { "MSPM0C1104SDDFR", 0x57b3, 0x77},
+ { "MSPM0C1104SDSGR", 0x57b3, 0x79},
+};
+
+/* https://www.ti.com/lit/gpn/MSPM0L2228 Table 8-16 and so on */
+static const struct mspm0_part_info mspm0lx22x_parts[] = {
+ { "MSPM0L1227SRGER", 0x7C32, 0xF1},
+ { "MSPM0L1227SPTR", 0x7C32, 0xC9},
+ { "MSPM0L1227SPMR", 0x7C32, 0x1C},
+ { "MSPM0L1227SPNAR", 0x7C32, 0x91},
+ { "MSPM0L1227SPNR", 0x7C32, 0x39},
+ { "MSPM0L1228SRGER", 0x33F7, 0x13},
+ { "MSPM0L1228SRHBR", 0x33F7, 0x3A},
+ { "MSPM0L1228SRGZR", 0x33F7, 0xBC},
+ { "MSPM0L1228SPTR", 0x33F7, 0xF8},
+ { "MSPM0L1228SPMR", 0x33F7, 0xCE},
+ { "MSPM0L1228SPNAR", 0x33F7, 0x59},
+ { "MSPM0L1228SPNR", 0x33F7, 0x7},
+ { "MSPM0L2227SRGZR", 0x5E8F, 0x90},
+ { "MSPM0L2227SPTR", 0x5E8F, 0xA},
+ { "MSPM0L2227SPMR", 0x5E8F, 0x6D},
+ { "MSPM0L2227SPNAR", 0x5E8F, 0x24},
+ { "MSPM0L2227SPNR", 0x5E8F, 0x68},
+ { "MSPM0L2228SRGZR", 0x2C38, 0xB8},
+ { "MSPM0L2228SPTR", 0x2C38, 0x25},
+ { "MSPM0L2228SPMR", 0x2C38, 0x6E},
+ { "MSPM0L2228SPNAR", 0x2C38, 0x63},
+ { "MSPM0L2228SPNR", 0x2C38, 0x3C},
+};
+
+static const struct mspm0_family_info mspm0_finf[] = {
+ { "MSPM0L", 0xbb82, ARRAY_SIZE(mspm0l_parts), mspm0l_parts },
+ { "MSPM0Lx22x", 0xbb9f, ARRAY_SIZE(mspm0lx22x_parts), mspm0lx22x_parts },
+ { "MSPM0G", 0xbb88, ARRAY_SIZE(mspm0g_parts), mspm0g_parts },
+ { "MSPM0C", 0xbba1, ARRAY_SIZE(mspm0c_parts), mspm0c_parts },
+};
+
+/*
+ * OpenOCD command interface
+ */
+
+/*
+ * flash_bank mspm0 <base> <size> 0 0 <target#>
+ */
+FLASH_BANK_COMMAND_HANDLER(mspm0_flash_bank_command)
+{
+ struct mspm0_flash_bank *mspm0_info;
+
+ switch (bank->base) {
+ case MSPM0_FLASH_BASE_NONMAIN:
+ case MSPM0_FLASH_BASE_MAIN:
+ case MSPM0_FLASH_BASE_DATA:
+ break;
+ default:
+ LOG_ERROR("Invalid bank address " TARGET_ADDR_FMT, bank->base);
+ return ERROR_FAIL;
+ }
+
+ mspm0_info = calloc(1, sizeof(struct mspm0_flash_bank));
+ if (!mspm0_info) {
+ LOG_ERROR("%s: Out of memory for mspm0_info!", __func__);
+ return ERROR_FAIL;
+ }
+
+ bank->driver_priv = mspm0_info;
+
+ mspm0_info->sector_size = 0x400;
+
+ return ERROR_OK;
+}
+
+/*
+ * Chip identification and status
+ */
+static int get_mspm0_info(struct flash_bank *bank, struct command_invocation *cmd)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+
+ if (mspm0_info->did == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ command_print_sameline(cmd,
+ "\nTI MSPM0 information: Chip is "
+ "%s rev %d Device Unique ID: 0x%" PRIu32 "\n",
+ mspm0_info->name, mspm0_info->version,
+ mspm0_info->traceid);
+ command_print_sameline(cmd,
+ "main flash: %uKiB in %u bank(s), sram: %uKiB, data flash: %uKiB",
+ mspm0_info->main_flash_size_kb,
+ mspm0_info->main_flash_num_banks, mspm0_info->sram_size_kb,
+ mspm0_info->data_flash_size_kb);
+
+ return ERROR_OK;
+}
+
+/* Extract a bitfield helper */
+static unsigned int mspm0_extract_val(unsigned int var, unsigned char hi, unsigned char lo)
+{
+ return (var & GENMASK(hi, lo)) >> lo;
+}
+
+static int mspm0_read_part_info(struct flash_bank *bank)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+ struct target *target = bank->target;
+ const struct mspm0_family_info *minfo = NULL;
+
+ /* Read and parse chip identification and flash version register */
+ uint32_t did;
+ int retval = target_read_u32(target, MSPM0_DID, &did);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read device ID");
+ return retval;
+ }
+ retval = target_read_u32(target, MSPM0_TRACEID, &mspm0_info->traceid);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read trace ID");
+ return retval;
+ }
+ uint32_t userid;
+ retval = target_read_u32(target, MSPM0_USERID, &userid);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read user ID");
+ return retval;
+ }
+ uint32_t flashram;
+ retval = target_read_u32(target, MSPM0_SRAMFLASH, &flashram);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read sramflash register");
+ return retval;
+ }
+ uint32_t flashdesc;
+ retval = target_read_u32(target, FCTL_REG_DESC, &flashdesc);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read flashctl description register");
+ return retval;
+ }
+
+ unsigned char version = mspm0_extract_val(did, 31, 28);
+ unsigned short pnum = mspm0_extract_val(did, 27, 12);
+ unsigned char variant = mspm0_extract_val(userid, 23, 16);
+ unsigned short part = mspm0_extract_val(userid, 15, 0);
+ unsigned short manufacturer = mspm0_extract_val(did, 11, 1);
+
+ /*
+ * Valid DIE and manufacturer ID?
+ * Check the ALWAYS_1 bit to be 1 and manufacturer to be 0x17. All MSPM0
+ * devices within the Device ID field of the factory constants will
+ * always read 0x17 as it is TI's JEDEC bank and company code. If 1
+ * and 0x17 is not read from their respective registers then it truly
+ * is not a MSPM0 device so we will return an error instead of
+ * going any further.
+ */
+ if (!(did & BIT(0)) || !(manufacturer & TI_MANUFACTURER_ID)) {
+ LOG_WARNING("Unknown Device ID[0x%" PRIx32 "], cannot identify target",
+ did);
+ LOG_DEBUG("did 0x%" PRIx32 ", traceid 0x%" PRIx32 ", userid 0x%" PRIx32
+ ", flashram 0x%" PRIx32 "", did, mspm0_info->traceid, userid,
+ flashram);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Initialize master index selector and probe status*/
+ unsigned char minfo_idx = 0xff;
+ unsigned char probe_status = MSPM0_NO_ID_FOUND;
+
+ /* Check if we at least know the family of devices */
+ for (unsigned int i = 0; i < ARRAY_SIZE(mspm0_finf); i++) {
+ if (mspm0_finf[i].part_num == pnum) {
+ minfo_idx = i;
+ minfo = &mspm0_finf[i];
+ probe_status = MSPM0_DEV_ID_FOUND;
+ break;
+ }
+ }
+
+ /* Initialize part index selector*/
+ unsigned char pinfo_idx = 0xff;
+
+ /*
+ * If we can identify the part number then we will attempt to identify
+ * the specific chip. Otherwise, if we do not know the part number then
+ * it would be useless to identify the specific chip.
+ */
+ if (probe_status == MSPM0_DEV_ID_FOUND) {
+ /* Can we specifically identify the chip */
+ for (unsigned int i = 0; i < minfo->part_count; i++) {
+ if (minfo->part_info[i].part == part
+ && minfo->part_info[i].variant == variant) {
+ pinfo_idx = i;
+ probe_status = MSPM0_DEV_PART_ID_FOUND;
+ break;
+ }
+ }
+ }
+
+ /*
+ * We will check the status of our probe within this switch-case statement
+ * using these three scenarios.
+ *
+ * 1) Device, part, and variant ID is unknown.
+ * 2) Device ID is known but the part/variant ID is unknown.
+ * 3) Device ID and part/variant ID is known
+ *
+ * For scenario 1, we allow the user to continue because if the
+ * manufacturer matches TI's JEDEC value and ALWAYS_1 from the device ID
+ * field is correct then the assumption the user is using an MSPM0 device
+ * can be made.
+ */
+ switch (probe_status) {
+ case MSPM0_NO_ID_FOUND:
+ mspm0_info->name = "mspm0x";
+ LOG_INFO("Unidentified PART[0x%x]/variant[0x%x"
+ "], unknown DeviceID[0x%x"
+ "]. Attempting to proceed as %s.", part, variant, pnum,
+ mspm0_info->name);
+ break;
+ case MSPM0_DEV_ID_FOUND:
+ mspm0_info->name = mspm0_finf[minfo_idx].family_name;
+ LOG_INFO("Unidentified PART[0x%x]/variant[0x%x"
+ "], known DeviceID[0x%x"
+ "]. Attempting to proceed as %s.", part, variant, pnum,
+ mspm0_info->name);
+ break;
+ case MSPM0_DEV_PART_ID_FOUND:
+ default:
+ mspm0_info->name = mspm0_finf[minfo_idx].part_info[pinfo_idx].part_name;
+ LOG_DEBUG("Part: %s detected", mspm0_info->name);
+ break;
+ }
+
+ mspm0_info->did = did;
+ mspm0_info->version = version;
+ mspm0_info->data_flash_size_kb = mspm0_extract_val(flashram, 31, 26);
+ mspm0_info->main_flash_size_kb = mspm0_extract_val(flashram, 11, 0);
+ mspm0_info->main_flash_num_banks = mspm0_extract_val(flashram, 13, 12) + 1;
+ mspm0_info->sram_size_kb = mspm0_extract_val(flashram, 25, 16);
+ mspm0_info->flash_version = mspm0_extract_val(flashdesc, 15, 12);
+
+ /*
+ * Hardcode flash_word_size unless we find some other pattern
+ * See section 7.7 (Foot note mentions the flash word size).
+ * almost all values seem to be 8 bytes, but if there are variance,
+ * then we should update mspm0_part_info structure with this info.
+ */
+ mspm0_info->flash_word_size_bytes = 8;
+
+ LOG_DEBUG("Detected: main flash: %uKb in %u banks, sram: %uKb, data flash: %uKb",
+ mspm0_info->main_flash_size_kb, mspm0_info->main_flash_num_banks,
+ mspm0_info->sram_size_kb, mspm0_info->data_flash_size_kb);
+
+ return ERROR_OK;
+}
+
+/*
+ * Decode error values
+ */
+static const struct {
+ const unsigned char bit_offset;
+ const char *fail_string;
+} mspm0_fctl_fail_decode_strings[] = {
+ { 2, "CMDINPROGRESS" },
+ { 4, "FAILWEPROT" },
+ { 5, "FAILVERIFY" },
+ { 6, "FAILILLADDR" },
+ { 7, "FAILMODE" },
+ { 12, "FAILMISC" },
+};
+
+static const char *mspm0_fctl_translate_ret_err(unsigned int return_code)
+{
+ for (unsigned int i = 0; i < ARRAY_SIZE(mspm0_fctl_fail_decode_strings); i++) {
+ if (return_code & BIT(mspm0_fctl_fail_decode_strings[i].bit_offset))
+ return mspm0_fctl_fail_decode_strings[i].fail_string;
+ }
+
+ /* If unknown error notify the user*/
+ return "FAILUNKNOWN";
+}
+
+static int mspm0_fctl_get_sector_reg(struct flash_bank *bank, unsigned int addr,
+ unsigned int *reg, unsigned int *sector_mask)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+ struct target *target = bank->target;
+ int ret = ERROR_OK;
+ unsigned int sector_num = (addr >> 10);
+ unsigned int sector_in_bank = sector_num;
+ unsigned int phys_sector_num = sector_num;
+ uint32_t sysctl_sec_status;
+ unsigned int exec_upper_bank;
+
+ /*
+ * If the device has dual banks we will need to check if it is configured
+ * to execute from the upper bank. In the scenario that we are executing
+ * from upper bank then we will need to protect it using CMDWEPROTA rather
+ * than CMDWEPROTB. We also need to take into account what sector
+ * we're using when going between banks.
+ */
+ if (mspm0_info->main_flash_num_banks > 1 &&
+ bank->base == MSPM0_FLASH_BASE_MAIN) {
+ ret = target_read_u32(target, SYSCTL_SECCFG_SECSTATUS, &sysctl_sec_status);
+ if (ret != ERROR_OK)
+ return ret;
+ exec_upper_bank = mspm0_extract_val(sysctl_sec_status, 12, 12);
+ if (exec_upper_bank) {
+ if (sector_num > (mspm0_info->main_flash_size_kb / 2)) {
+ phys_sector_num =
+ sector_num - (mspm0_info->main_flash_size_kb / 2);
+ } else {
+ phys_sector_num =
+ sector_num + (mspm0_info->main_flash_size_kb / 2);
+ }
+ }
+ sector_in_bank =
+ sector_num % (mspm0_info->main_flash_size_kb /
+ mspm0_info->main_flash_num_banks);
+ }
+
+ /*
+ * NOTE: MSPM0 devices of version A will use CMDWEPROTA and CMDWEPROTB
+ * for MAIN flash. CMDWEPROTC is included in the TRM/DATASHEET but for
+ * all practical purposes, it is considered reserved. If the flash
+ * version on the device is version B, then we will only use
+ * CMDWEPROTB for MAIN and DATA flash if the device has it.
+ */
+ switch (bank->base) {
+ case MSPM0_FLASH_BASE_MAIN:
+ case MSPM0_FLASH_BASE_DATA:
+ if (mspm0_info->flash_version < FCTL_FEATURE_VER_B) {
+ /* Use CMDWEPROTA */
+ if (phys_sector_num < 32) {
+ *sector_mask = BIT(phys_sector_num);
+ *reg = FCTL_REG_CMDWEPROTA;
+ }
+
+ /* Use CMDWEPROTB */
+ if (phys_sector_num >= 32 && sector_in_bank < 256) {
+ /* Dual bank system */
+ if (mspm0_info->main_flash_num_banks > 1)
+ *sector_mask = BIT(sector_in_bank / 8);
+ else /* Single bank system */
+ *sector_mask = BIT((sector_in_bank - 32) / 8);
+ *reg = FCTL_REG_CMDWEPROTB;
+ }
+ } else {
+ *sector_mask = BIT((sector_in_bank / 8) % 32);
+ *reg = FCTL_REG_CMDWEPROTB;
+ }
+ break;
+ case MSPM0_FLASH_BASE_NONMAIN:
+ *sector_mask = BIT(sector_num % 32);
+ *reg = FCTL_REG_CMDWEPROTNM;
+ break;
+ default:
+ /*
+ * Not expected to reach here due to check in mspm0_address_check()
+ * but adding it as another layer of safety.
+ */
+ ret = ERROR_FLASH_DST_OUT_OF_BANK;
+ break;
+ }
+
+ if (ret != ERROR_OK)
+ LOG_ERROR("Unable to map sector protect reg for address 0x%08x", addr);
+
+ return ret;
+}
+
+static int mspm0_address_check(struct flash_bank *bank, unsigned int addr)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+ unsigned int flash_main_size = mspm0_info->main_flash_size_kb * 1024;
+ unsigned int flash_data_size = mspm0_info->data_flash_size_kb * 1024;
+ int ret = ERROR_FLASH_SECTOR_INVALID;
+
+ /*
+ * Before unprotecting any memory lets make sure that the address and
+ * bank given is a known bank and whether or not the address falls under
+ * the proper bank.
+ */
+ switch (bank->base) {
+ case MSPM0_FLASH_BASE_MAIN:
+ if (addr <= (MSPM0_FLASH_BASE_MAIN + flash_main_size))
+ ret = ERROR_OK;
+ break;
+ case MSPM0_FLASH_BASE_NONMAIN:
+ if (addr >= MSPM0_FLASH_BASE_NONMAIN && addr <= MSPM0_FLASH_END_NONMAIN)
+ ret = ERROR_OK;
+ break;
+ case MSPM0_FLASH_BASE_DATA:
+ if (addr >= MSPM0_FLASH_BASE_DATA &&
+ addr <= (MSPM0_FLASH_BASE_DATA + flash_data_size))
+ ret = ERROR_OK;
+ break;
+ default:
+ ret = ERROR_FLASH_DST_OUT_OF_BANK;
+ break;
+ }
+
+ return ret;
+}
+
+static int mspm0_fctl_unprotect_sector(struct flash_bank *bank, unsigned int addr)
+{
+ struct target *target = bank->target;
+ unsigned int reg = 0x0;
+ uint32_t sector_mask = 0x0;
+ int ret;
+
+ ret = mspm0_address_check(bank, addr);
+ switch (ret) {
+ case ERROR_FLASH_SECTOR_INVALID:
+ LOG_ERROR("Unable to map sector protect reg for address 0x%08x", addr);
+ break;
+ case ERROR_FLASH_DST_OUT_OF_BANK:
+ LOG_ERROR("Unable to determine which bank to use 0x%08x", addr);
+ break;
+ default:
+ mspm0_fctl_get_sector_reg(bank, addr, &reg, &sector_mask);
+ ret = target_write_u32(target, reg, ~sector_mask);
+ break;
+ }
+
+ return ret;
+}
+
+static int mspm0_fctl_cfg_command(struct flash_bank *bank,
+ uint32_t addr,
+ uint32_t cmd,
+ uint32_t byte_en)
+{
+ struct target *target = bank->target;
+
+ /*
+ * Configure the flash operation within the CMDTYPE register, byte_en
+ * bits if needed, and then set the address where the flash operation
+ * will execute.
+ */
+ int retval = target_write_u32(target, FCTL_REG_CMDTYPE, cmd);
+ if (retval != ERROR_OK)
+ return retval;
+ if (byte_en != 0) {
+ retval = target_write_u32(target, FCTL_REG_CMDBYTEN, byte_en);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ return target_write_u32(target, FCTL_REG_CMDADDR, addr);
+}
+
+static int mspm0_fctl_wait_cmd_ok(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ uint32_t return_code = 0;
+ int64_t start_ms;
+ int64_t elapsed_ms;
+
+ start_ms = timeval_ms();
+ while ((return_code & FCTL_STATCMD_CMDDONE_MASK) != FCTL_STATCMD_CMDDONE_STATDONE) {
+ int retval = target_read_u32(target, FCTL_REG_STATCMD, &return_code);
+ if (retval != ERROR_OK)
+ return retval;
+
+ elapsed_ms = timeval_ms() - start_ms;
+ if (elapsed_ms > 500)
+ keep_alive();
+ if (elapsed_ms > MSPM0_FLASH_TIMEOUT_MS)
+ break;
+ }
+
+ if ((return_code & FCTL_STATCMD_CMDPASS_MASK) != FCTL_STATCMD_CMDPASS_STATPASS) {
+ LOG_ERROR("Flash command failed: %s", mspm0_fctl_translate_ret_err(return_code));
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
+static int mspm0_fctl_sector_erase(struct flash_bank *bank, uint32_t addr)
+{
+ struct target *target = bank->target;
+
+ /*
+ * TRM Says:
+ * Note that the CMDWEPROTx registers are reset to a protected state
+ * at the end of all program and erase operations. These registers
+ * must be re-configured by software before a new operation is
+ * initiated.
+ *
+ * This means that as we start erasing sector by sector, the protection
+ * registers are reset and need to be unprotected *again* for the next
+ * erase operation. Unfortunately, this means that we cannot do a unitary
+ * unprotect operation independent of flash erase operation
+ */
+ int retval = mspm0_fctl_unprotect_sector(bank, addr);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Unprotecting sector of memory at address 0x%08" PRIx32
+ " failed", addr);
+ return retval;
+ }
+
+ /* Actual erase operation */
+ retval = mspm0_fctl_cfg_command(bank, addr,
+ (FCTL_CMDTYPE_COMMAND_ERASE | FCTL_CMDTYPE_SIZE_SECTOR), 0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, FCTL_REG_CMDEXEC, FCTL_CMDEXEC_VAL_EXECUTE);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return mspm0_fctl_wait_cmd_ok(bank);
+}
+
+static int mspm0_protect_check(struct flash_bank *bank)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+
+ if (mspm0_info->did == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ /*
+ * TRM Says:
+ * Note that the CMDWEPROTx registers are reset to a protected state
+ * at the end of all program and erase operations. These registers
+ * must be re-configured by software before a new operation is
+ * initiated.
+ *
+ * This means that when any flash operation is performed at a block level,
+ * the block is locked back again. This prevents usage where we can set a
+ * protection level once at the flash level and then do erase / write
+ * operation without touching the protection register (since it is
+ * reset by hardware automatically). In effect, we cannot use the hardware
+ * defined protection scheme in openOCD.
+ *
+ * To deal with this protection scheme, the CMDWEPROTx register that
+ * correlates to the sector is modified at the time of operation and as far
+ * openOCD is concerned, the flash operates as completely un-protected
+ * flash.
+ */
+ for (unsigned int i = 0; i < bank->num_sectors; i++)
+ bank->sectors[i].is_protected = 0;
+
+ return ERROR_OK;
+}
+
+static int mspm0_erase(struct flash_bank *bank, unsigned int first, unsigned int last)
+{
+ struct target *target = bank->target;
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+ int retval = ERROR_OK;
+ uint32_t protect_reg_cache[MSPM0_MAX_PROTREGS];
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Please halt target for erasing flash");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (mspm0_info->did == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ /* Pick a copy of the current protection config for later restoration */
+ for (unsigned int i = 0; i < mspm0_info->protect_reg_count; i++) {
+ retval = target_read_u32(target,
+ mspm0_info->protect_reg_base + (i * 4),
+ &protect_reg_cache[i]);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed saving flashctl protection status");
+ return retval;
+ }
+ }
+
+ switch (bank->base) {
+ case MSPM0_FLASH_BASE_MAIN:
+ for (unsigned int csa = first; csa <= last; csa++) {
+ unsigned int addr = csa * mspm0_info->sector_size;
+ retval = mspm0_fctl_sector_erase(bank, addr);
+ if (retval != ERROR_OK)
+ LOG_ERROR("Sector erase on MAIN failed at address 0x%08x "
+ "(sector: %u)", addr, csa);
+ }
+ break;
+ case MSPM0_FLASH_BASE_NONMAIN:
+ retval = mspm0_fctl_sector_erase(bank, MSPM0_FLASH_BASE_NONMAIN);
+ if (retval != ERROR_OK)
+ LOG_ERROR("Sector erase on NONMAIN failed");
+ break;
+ case MSPM0_FLASH_BASE_DATA:
+ for (unsigned int csa = first; csa <= last; csa++) {
+ unsigned int addr = (MSPM0_FLASH_BASE_DATA +
+ (csa * mspm0_info->sector_size));
+ retval = mspm0_fctl_sector_erase(bank, addr);
+ if (retval != ERROR_OK)
+ LOG_ERROR("Sector erase on DATA bank failed at address 0x%08x "
+ "(sector: %u)", addr, csa);
+ }
+ break;
+ default:
+ LOG_ERROR("Invalid memory region access");
+ retval = ERROR_FLASH_BANK_INVALID;
+ break;
+ }
+
+ /* If there were any issues in our checks, return the error */
+ if (retval != ERROR_OK)
+ return retval;
+
+ /*
+ * TRM Says:
+ * Note that the CMDWEPROTx registers are reset to a protected state
+ * at the end of all program and erase operations. These registers
+ * must be re-configured by software before a new operation is
+ * initiated
+ * Let us just Dump the protection registers back to the system.
+ * That way we retain the protection status as requested by the user
+ */
+ for (unsigned int i = 0; i < mspm0_info->protect_reg_count; i++) {
+ retval = target_write_u32(target, mspm0_info->protect_reg_base + (i * 4),
+ protect_reg_cache[i]);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed re-applying protection status of flashctl");
+ return retval;
+ }
+ }
+
+ return retval;
+}
+
+static int mspm0_write(struct flash_bank *bank, const unsigned char *buffer,
+ unsigned int offset, unsigned int count)
+{
+ struct target *target = bank->target;
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+ uint32_t protect_reg_cache[MSPM0_MAX_PROTREGS];
+ int retval;
+
+ /*
+ * XXX: TRM Says:
+ * The number of program operations applied to a given word line must be
+ * monitored to ensure that the maximum word line program limit before
+ * erase is not violated.
+ *
+ * There is no reasonable way we can maintain that state in OpenOCD. So,
+ * Let the manufacturing path figure this out.
+ */
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Please halt target for programming flash");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (mspm0_info->did == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ /*
+ * Pick a copy of the current protection config for later restoration
+ * We need to restore these regs after every write, so instead of trying
+ * to figure things out on the fly, we just context save and restore
+ */
+ for (unsigned int i = 0; i < mspm0_info->protect_reg_count; i++) {
+ retval = target_read_u32(target,
+ mspm0_info->protect_reg_base + (i * 4),
+ &protect_reg_cache[i]);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed saving flashctl protection status");
+ return retval;
+ }
+ }
+
+ /* Add proper memory offset for bank being written to */
+ unsigned int addr = bank->base + offset;
+
+ while (count) {
+ unsigned int num_bytes_to_write;
+ uint32_t bytes_en;
+
+ /*
+ * If count is not 64 bit aligned, we will do byte wise op to keep things simple
+ * Usually this might mean we need to additional write ops towards
+ * trailing edge, but that is a tiny penalty for image downloads.
+ * NOTE: we are going to assume the device does not support multi-word
+ * programming - there does not seem to be discoverability!
+ */
+ if (count < mspm0_info->flash_word_size_bytes)
+ num_bytes_to_write = count;
+ else
+ num_bytes_to_write = mspm0_info->flash_word_size_bytes;
+
+ /* Data bytes to write */
+ bytes_en = (1 << num_bytes_to_write) - 1;
+ /* ECC chunks to write */
+ switch (mspm0_info->flash_word_size_bytes) {
+ case 8:
+ bytes_en |= BIT(8);
+ break;
+ case 16:
+ bytes_en |= BIT(16);
+ bytes_en |= (num_bytes_to_write > 8) ? BIT(17) : 0;
+ break;
+ default:
+ LOG_ERROR("Invalid flash_word_size_bytes %d",
+ mspm0_info->flash_word_size_bytes);
+ return ERROR_FAIL;
+ }
+
+ retval = mspm0_fctl_cfg_command(bank, addr,
+ (FCTL_CMDTYPE_COMMAND_PROGRAM | FCTL_CMDTYPE_SIZE_ONEWORD),
+ bytes_en);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = mspm0_fctl_unprotect_sector(bank, addr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_buffer(target, FCTL_REG_CMDDATA0, num_bytes_to_write, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+
+ addr += num_bytes_to_write;
+ buffer += num_bytes_to_write;
+ count -= num_bytes_to_write;
+
+ retval = target_write_u32(target, FCTL_REG_CMDEXEC, FCTL_CMDEXEC_VAL_EXECUTE);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = mspm0_fctl_wait_cmd_ok(bank);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ /*
+ * TRM Says:
+ * Note that the CMDWEPROTx registers are reset to a protected state
+ * at the end of all program and erase operations. These registers
+ * must be re-configured by software before a new operation is
+ * initiated
+ * Let us just Dump the protection registers back to the system.
+ * That way we retain the protection status as requested by the user
+ */
+ for (unsigned int i = 0; i < mspm0_info->protect_reg_count; i++) {
+ retval = target_write_u32(target,
+ mspm0_info->protect_reg_base + (i * 4),
+ protect_reg_cache[i]);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed re-applying protection status of flashctl");
+ return retval;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+static int mspm0_probe(struct flash_bank *bank)
+{
+ struct mspm0_flash_bank *mspm0_info = bank->driver_priv;
+
+ /*
+ * If this is a mspm0 chip, it has flash; probe() is just
+ * to figure out how much is present. Only do it once.
+ */
+ if (mspm0_info->did != 0)
+ return ERROR_OK;
+
+ /*
+ * mspm0_read_part_info() already handled error checking and
+ * reporting. Note that it doesn't write, so we don't care about
+ * whether the target is halted or not.
+ */
+ int retval = mspm0_read_part_info(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
+ }
+
+ bank->write_start_alignment = 4;
+ bank->write_end_alignment = 4;
+
+ switch (bank->base) {
+ case MSPM0_FLASH_BASE_NONMAIN:
+ bank->size = 1024;
+ bank->num_sectors = 0x1;
+ mspm0_info->protect_reg_base = FCTL_REG_CMDWEPROTNM;
+ mspm0_info->protect_reg_count = 1;
+ break;
+ case MSPM0_FLASH_BASE_MAIN:
+ bank->size = (mspm0_info->main_flash_size_kb * 1024);
+ bank->num_sectors = bank->size / mspm0_info->sector_size;
+ /*
+ * If the feature version bit read from the FCTL_REG_DESC is
+ * greater than or equal to 0xA then it means that the device
+ * will exclusively use CMDWEPROTB ONLY for MAIN memory protection
+ */
+ if (mspm0_info->flash_version >= FCTL_FEATURE_VER_B) {
+ mspm0_info->protect_reg_base = FCTL_REG_CMDWEPROTB;
+ mspm0_info->protect_reg_count = 1;
+ } else {
+ mspm0_info->protect_reg_base = FCTL_REG_CMDWEPROTA;
+ mspm0_info->protect_reg_count = 3;
+ }
+ break;
+ case MSPM0_FLASH_BASE_DATA:
+ if (!mspm0_info->data_flash_size_kb) {
+ LOG_INFO("Data region NOT available!");
+ bank->size = 0x0;
+ bank->num_sectors = 0x0;
+ return ERROR_OK;
+ }
+ /*
+ * Any MSPM0 device containing data bank will have a flashctl
+ * feature version of 0xA or higher. Since data bank is treated
+ * like MAIN memory, it will also exclusively use CMDWEPROTB for
+ * protection.
+ */
+ bank->size = (mspm0_info->data_flash_size_kb * 1024);
+ bank->num_sectors = bank->size / mspm0_info->sector_size;
+ mspm0_info->protect_reg_base = FCTL_REG_CMDWEPROTB;
+ mspm0_info->protect_reg_count = 1;
+ break;
+ default:
+ LOG_ERROR("Invalid bank address " TARGET_ADDR_FMT,
+ bank->base);
+ return ERROR_FAIL;
+ }
+
+ bank->sectors = calloc(bank->num_sectors, sizeof(struct flash_sector));
+ if (!bank->sectors) {
+ LOG_ERROR("Out of memory for sectors!");
+ return ERROR_FAIL;
+ }
+ for (unsigned int i = 0; i < bank->num_sectors; i++) {
+ bank->sectors[i].offset = i * mspm0_info->sector_size;
+ bank->sectors[i].size = mspm0_info->sector_size;
+ bank->sectors[i].is_erased = -1;
+ }
+
+ return ERROR_OK;
+}
+
+const struct flash_driver mspm0_flash = {
+ .name = "mspm0",
+ .flash_bank_command = mspm0_flash_bank_command,
+ .erase = mspm0_erase,
+ .protect = NULL,
+ .write = mspm0_write,
+ .read = default_flash_read,
+ .probe = mspm0_probe,
+ .auto_probe = mspm0_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = mspm0_protect_check,
+ .info = get_mspm0_info,
+ .free_driver_priv = default_flash_free_driver_priv,
+};
diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c
index 3062fca..fa57db8 100644
--- a/src/flash/nor/stm32l4x.c
+++ b/src/flash/nor/stm32l4x.c
@@ -370,11 +370,15 @@ static const struct stm32l4_rev stm32u53_u54xx_revs[] = {
static const struct stm32l4_rev stm32u57_u58xx_revs[] = {
{ 0x1000, "A" }, { 0x1001, "Z" }, { 0x1003, "Y" }, { 0x2000, "B" },
- { 0x2001, "X" }, { 0x3000, "C" }, { 0x3001, "W" },
+ { 0x2001, "X" }, { 0x3000, "C" }, { 0x3001, "W" }, { 0x3007, "U" },
};
static const struct stm32l4_rev stm32u59_u5axx_revs[] = {
- { 0x3001, "X" },
+ { 0x3001, "X" }, { 0x3002, "W" },
+};
+
+static const struct stm32l4_rev stm32u5f_u5gxx_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" },
};
static const struct stm32l4_rev stm32wba5x_revs[] = {
@@ -675,6 +679,18 @@ static const struct stm32l4_part_info stm32l4_parts[] = {
.otp_size = 512,
},
{
+ .id = DEVID_STM32U5F_U5GXX,
+ .revs = stm32u5f_u5gxx_revs,
+ .num_revs = ARRAY_SIZE(stm32u5f_u5gxx_revs),
+ .device_str = "STM32U5F/U5Gxx",
+ .max_flash_size_kb = 4096,
+ .flags = F_HAS_DUAL_BANK | F_QUAD_WORD_PROG | F_HAS_TZ | F_HAS_L5_FLASH_REGS,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x0BFA07A0,
+ .otp_base = 0x0BFA0000,
+ .otp_size = 512,
+ },
+ {
.id = DEVID_STM32WBA5X,
.revs = stm32wba5x_revs,
.num_revs = ARRAY_SIZE(stm32wba5x_revs),
@@ -2095,6 +2111,7 @@ static int stm32l4_probe(struct flash_bank *bank)
case DEVID_STM32U53_U54XX:
case DEVID_STM32U57_U58XX:
case DEVID_STM32U59_U5AXX:
+ case DEVID_STM32U5F_U5GXX:
/* according to RM0456 Rev 4, Chapter 7.3.1 and 7.9.13
* U53x/U54x have 512K max flash size:
* 512K variants are always in DUAL BANK mode
@@ -2102,7 +2119,7 @@ static int stm32l4_probe(struct flash_bank *bank)
* U57x/U58x have 2M max flash size:
* 2M variants are always in DUAL BANK mode
* 1M variants can be in DUAL BANK mode if FLASH_OPTR:DUALBANK is set
- * U59x/U5Ax have 4M max flash size:
+ * U59x/U5Ax/U5Fx/U5Gx have 4M max flash size:
* 4M variants are always in DUAL BANK mode
* 2M variants can be in DUAL BANK mode if FLASH_OPTR:DUALBANK is set
* Note: flash banks are always contiguous
diff --git a/src/flash/nor/stm32l4x.h b/src/flash/nor/stm32l4x.h
index f152c9f..3199d4f 100644
--- a/src/flash/nor/stm32l4x.h
+++ b/src/flash/nor/stm32l4x.h
@@ -103,6 +103,7 @@
#define DEVID_STM32L4R_L4SXX 0x470
#define DEVID_STM32L4P_L4QXX 0x471
#define DEVID_STM32L55_L56XX 0x472
+#define DEVID_STM32U5F_U5GXX 0x476
#define DEVID_STM32G49_G4AXX 0x479
#define DEVID_STM32U59_U5AXX 0x481
#define DEVID_STM32U57_U58XX 0x482
generated by cgit v1.1 at 2025-04-16 22:49:17 +0000