Remove more vector stuff

8 files changed, 54 insertions, 179 deletions

diff --git a/config.h.in b/config.h.in
index 28d57d2..2ec4911 100644
--- a/config.h.in
+++ b/config.h.in
@@ -33,12 +33,6 @@
 /* Define if floating-point instructions are supported */
 #undef RISCV_ENABLE_FPU
 
-/* Define if instruction compression is supported */
-#undef RISCV_ENABLE_RVC
-
-/* Define if vector processor is supported */
-#undef RISCV_ENABLE_VEC
-
 /* Define if subproject MCPPBS_SPROJ_NORM is enabled */
 #undef SOFTFLOAT_ENABLED
 
diff --git a/configure b/configure
index 7c02fa0..32f29c2 100755
--- a/configure
+++ b/configure
@@ -649,8 +649,6 @@ enable_optional_subprojects
 with_fesvr
 enable_fpu
 enable_64bit
-enable_rvc
-enable_vec
 '
       ac_precious_vars='build_alias
 host_alias
@@ -1286,8 +1284,6 @@ Optional Features:
                           Enable all optional subprojects
   --disable-fpu           Disable floating-point
   --disable-64bit         Disable 64-bit mode
-  --enable-rvc            Enable instruction compression
-  --disable-vec           Disable vector processor
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
@@ -4205,32 +4201,6 @@ $as_echo "#define RISCV_ENABLE_64BIT /**/" >>confdefs.h
 
 fi
 
-# Check whether --enable-rvc was given.
-if test "${enable_rvc+set}" = set; then :
-  enableval=$enable_rvc;
-fi
-
-if test "x$enable_rvc" = "xyes"; then :
-
-
-$as_echo "#define RISCV_ENABLE_RVC /**/" >>confdefs.h
-
-
-fi
-
-# Check whether --enable-vec was given.
-if test "${enable_vec+set}" = set; then :
-  enableval=$enable_vec;
-fi
-
-if test "x$enable_vec" != "xno"; then :
-
-
-$as_echo "#define RISCV_ENABLE_VEC /**/" >>confdefs.h
-
-
-fi
-
 
 
 
diff --git a/hwacha/hwacha.h b/hwacha/hwacha.h
new file mode 100644
index 0000000..a92ab4b
--- /dev/null
+++ b/hwacha/hwacha.h
@@ -0,0 +1,49 @@
+#ifndef _HWACHA_H
+#define _HWACHA_H
+
+// vector stuff
+#define VL vl
+
+#define UT_RS1(idx) uts[idx]->XPR[insn.rtype.rs1]
+#define UT_RS2(idx) uts[idx]->XPR[insn.rtype.rs2]
+#define UT_RD(idx) uts[idx]->XPR.write_port(insn.rtype.rd)
+#define UT_RA(idx) uts[idx]->XPR.write_port(1)
+#define UT_FRS1(idx) uts[idx]->FPR[insn.ftype.rs1]
+#define UT_FRS2(idx) uts[idx]->FPR[insn.ftype.rs2]
+#define UT_FRS3(idx) uts[idx]->FPR[insn.ftype.rs3]
+#define UT_FRD(idx) uts[idx]->FPR.write_port(insn.ftype.rd)
+#define UT_RM(idx) ((insn.ftype.rm != 7) ? insn.ftype.rm : \
+              ((uts[idx]->fsr & FSR_RD) >> FSR_RD_SHIFT))
+
+#define UT_LOOP_START for (int i=0;i<VL; i++) {
+#define UT_LOOP_END }
+#define UT_LOOP_RS1 UT_RS1(i)
+#define UT_LOOP_RS2 UT_RS2(i)
+#define UT_LOOP_RD UT_RD(i)
+#define UT_LOOP_RA UT_RA(i)
+#define UT_LOOP_FRS1 UT_FRS1(i)
+#define UT_LOOP_FRS2 UT_FRS2(i)
+#define UT_LOOP_FRS3 UT_FRS3(i)
+#define UT_LOOP_FRD UT_FRD(i)
+#define UT_LOOP_RM UT_RM(i)
+
+#define VEC_LOAD(dst, func, inc) \
+  reg_t addr = RS1; \
+  UT_LOOP_START \
+    UT_LOOP_##dst = mmu.func(addr); \
+    addr += inc; \
+  UT_LOOP_END
+
+#define VEC_STORE(src, func, inc) \
+  reg_t addr = RS1; \
+  UT_LOOP_START \
+    mmu.func(addr, UT_LOOP_##src); \
+    addr += inc; \
+  UT_LOOP_END
+
+enum vt_command_t
+{
+  vt_command_stop,
+};
+
+#endif
diff --git a/riscv/decode.h b/riscv/decode.h
index 7c99581..1dfec6e 100644
--- a/riscv/decode.h
+++ b/riscv/decode.h
@@ -166,10 +166,6 @@ private:
   T data[N];
 };
 
-#define throw_illegal_instruction \
-  ({ if (utmode) throw trap_vector_illegal_instruction; \
-     else throw trap_illegal_instruction; })
-
 // helpful macros, etc
 #define RS1 XPR[insn.rtype.rs1]
 #define RS2 XPR[insn.rtype.rs2]
@@ -191,27 +187,19 @@ private:
 #define BTYPE_EADDR sext_xprlen(RS1 + BIMM)
 #define RM ({ int rm = insn.ftype.rm; \
               if(rm == 7) rm = (fsr & FSR_RD) >> FSR_RD_SHIFT; \
-              if(rm > 4) throw_illegal_instruction; \
+              if(rm > 4) throw trap_illegal_instruction; \
               rm; })
 
 #define xpr64 (xprlen == 64)
 
 #define require_supervisor if(unlikely(!(sr & SR_S))) throw trap_privileged_instruction
-#define require_xpr64 if(unlikely(!xpr64)) throw_illegal_instruction
-#define require_xpr32 if(unlikely(xpr64)) throw_illegal_instruction
+#define require_xpr64 if(unlikely(!xpr64)) throw trap_illegal_instruction
+#define require_xpr32 if(unlikely(xpr64)) throw trap_illegal_instruction
 #ifndef RISCV_ENABLE_FPU
 # define require_fp throw trap_illegal_instruction
 #else
 # define require_fp if(unlikely(!(sr & SR_EF))) throw trap_fp_disabled
 #endif
-#ifndef RISCV_ENABLE_VEC
-# define require_vector throw trap_illegal_instruction
-#else
-# define require_vector \
-  ({ if(!(sr & SR_EV)) throw trap_vector_disabled; \
-    else if (!utmode && (vecbanks_count < 3)) throw trap_vector_bank; \
-  })
-#endif
 
 #define cmp_trunc(reg) (reg_t(reg) << (64-xprlen))
 #define set_fp_exceptions ({ set_fsr(fsr | \
@@ -235,49 +223,4 @@ private:
        npc = (x); \
      } while(0)
 
-// vector stuff
-#define VL vl
-
-#define UT_RS1(idx) uts[idx]->XPR[insn.rtype.rs1]
-#define UT_RS2(idx) uts[idx]->XPR[insn.rtype.rs2]
-#define UT_RD(idx) uts[idx]->XPR.write_port(insn.rtype.rd)
-#define UT_RA(idx) uts[idx]->XPR.write_port(1)
-#define UT_FRS1(idx) uts[idx]->FPR[insn.ftype.rs1]
-#define UT_FRS2(idx) uts[idx]->FPR[insn.ftype.rs2]
-#define UT_FRS3(idx) uts[idx]->FPR[insn.ftype.rs3]
-#define UT_FRD(idx) uts[idx]->FPR.write_port(insn.ftype.rd)
-#define UT_RM(idx) ((insn.ftype.rm != 7) ? insn.ftype.rm : \
-              ((uts[idx]->fsr & FSR_RD) >> FSR_RD_SHIFT))
-
-#define UT_LOOP_START for (int i=0;i<VL; i++) {
-#define UT_LOOP_END }
-#define UT_LOOP_RS1 UT_RS1(i)
-#define UT_LOOP_RS2 UT_RS2(i)
-#define UT_LOOP_RD UT_RD(i)
-#define UT_LOOP_RA UT_RA(i)
-#define UT_LOOP_FRS1 UT_FRS1(i)
-#define UT_LOOP_FRS2 UT_FRS2(i)
-#define UT_LOOP_FRS3 UT_FRS3(i)
-#define UT_LOOP_FRD UT_FRD(i)
-#define UT_LOOP_RM UT_RM(i)
-
-#define VEC_LOAD(dst, func, inc) \
-  reg_t addr = RS1; \
-  UT_LOOP_START \
-    UT_LOOP_##dst = mmu.func(addr); \
-    addr += inc; \
-  UT_LOOP_END
-
-#define VEC_STORE(src, func, inc) \
-  reg_t addr = RS1; \
-  UT_LOOP_START \
-    mmu.func(addr, UT_LOOP_##src); \
-    addr += inc; \
-  UT_LOOP_END
-
-enum vt_command_t
-{
-  vt_command_stop,
-};
-
 #endif
diff --git a/riscv/mmu.h b/riscv/mmu.h
index 49a5f0b..64b11d3 100644
--- a/riscv/mmu.h
+++ b/riscv/mmu.h
@@ -104,9 +104,6 @@ public:
   // load instruction from memory at aligned address.
   inline insn_fetch_t load_insn(reg_t addr)
   {
-#ifdef RISCV_ENABLE_RVC
-# error TODO: Make MMU instruction cache support 2-byte alignment
-#endif
     reg_t idx = (addr/sizeof(insn_t::itype)) % ICACHE_ENTRIES;
     if (unlikely(icache_tag[idx] != addr))
     {
diff --git a/riscv/processor.cc b/riscv/processor.cc
index 42182bd..e7c0872 100644
--- a/riscv/processor.cc
+++ b/riscv/processor.cc
@@ -13,7 +13,7 @@
 #include <limits.h>
 
 processor_t::processor_t(sim_t* _sim, mmu_t* _mmu, uint32_t _id)
-  : sim(*_sim), mmu(*_mmu), id(_id), opcode_bits(0), utidx(0)
+  : sim(*_sim), mmu(*_mmu), id(_id), opcode_bits(0)
 {
   reset(true);
   mmu.set_processor(this);
@@ -22,23 +22,6 @@ processor_t::processor_t(sim_t* _sim, mmu_t* _mmu, uint32_t _id)
     register_insn(match, mask, (insn_func_t)&processor_t::rv32_##name, (insn_func_t)&processor_t::rv64_##name);
   #include "opcodes.h"
   #undef DECLARE_INSN
-
-  // create microthreads
-  for (int i=0; i<MAX_UTS; i++)
-    uts[i] = new processor_t(&sim, &mmu, id, i);
-}
-
-processor_t::processor_t(sim_t* _sim, mmu_t* _mmu, uint32_t _id,
-                         uint32_t _utidx)
-  : sim(*_sim), mmu(*_mmu), id(_id)
-{
-  reset(true);
-  set_pcr(PCR_SR, SR_U64 | SR_EF | SR_EV);
-  utidx = _utidx;
-
-  // microthreads don't possess their own microthreads
-  for (int i=0; i<MAX_UTS; i++)
-    uts[i] = NULL;
 }
 
 processor_t::~processor_t()
@@ -73,16 +56,6 @@ void processor_t::reset(bool value)
   compare = 0;
   cycle = 0;
   set_fsr(0);
-
-  // vector stuff
-  vecbanks = 0xff;
-  vecbanks_count = 8;
-  utidx = -1;
-  vlmax = 32;
-  vl = 0;
-  nxfpr_bank = 256;
-  nxpr_use = 32;
-  nfpr_use = 32;
 }
 
 void processor_t::set_fsr(uint32_t val)
@@ -90,21 +63,6 @@ void processor_t::set_fsr(uint32_t val)
   fsr = val & ~FSR_ZERO; // clear FSR bits that read as zero
 }
 
-void processor_t::vcfg()
-{
-  if (nxpr_use + nfpr_use < 2)
-    vlmax = nxfpr_bank * vecbanks_count;
-  else
-    vlmax = (nxfpr_bank / (nxpr_use + nfpr_use - 1)) * vecbanks_count;
-
-  vlmax = std::min(vlmax, MAX_UTS);
-}
-
-void processor_t::setvl(int vlapp)
-{
-  vl = std::min(vlmax, vlapp);
-}
-
 void processor_t::take_interrupt()
 {
   uint32_t interrupts = (sr & SR_IP) >> SR_IP_SHIFT;
@@ -161,12 +119,7 @@ void processor_t::step(size_t n, bool noisy)
   }
   catch(interrupt_t t)
   {
-    take_trap((1ULL << (8*sizeof(reg_t)-1)) + t.i, noisy);
-  }
-  catch(vt_command_t cmd)
-  {
-    // this microthread has finished
-    assert(cmd == vt_command_stop);
+    take_trap((1ULL << ((sr & SR_S64) ? 63 : 31)) + t.i, noisy);
   }
 
   cycle += i;
diff --git a/riscv/processor.h b/riscv/processor.h
index 08c3672..e21901c 100644
--- a/riscv/processor.h
+++ b/riscv/processor.h
@@ -9,8 +9,6 @@
 #include "config.h"
 #include <map>
 
-#define MAX_UTS 2048
-
 class processor_t;
 class mmu_t;
 typedef reg_t (*insn_func_t)(processor_t*, insn_t, reg_t);
@@ -76,25 +74,6 @@ private:
   void take_trap(reg_t t, bool noisy); // take an exception
   void disasm(insn_t insn, reg_t pc); // disassemble and print an instruction
 
-  // vector stuff
-  void vcfg();
-  void setvl(int vlapp);
-
-  reg_t vecbanks;
-  uint32_t vecbanks_count;
-
-  bool utmode;
-  uint32_t utidx;
-  int vlmax;
-  int vl;
-  int nxfpr_bank;
-  int nxpr_use;
-  int nfpr_use;
-  processor_t* uts[MAX_UTS];
-
-  // this constructor is used for each of the uts
-  processor_t(sim_t* _sim, mmu_t* _mmu, uint32_t _id, uint32_t _utidx);
-
   friend class sim_t;
   friend class mmu_t;
   friend class htif_isasim_t;
diff --git a/riscv/riscv.ac b/riscv/riscv.ac
index 687d5bc..335a0bf 100644
--- a/riscv/riscv.ac
+++ b/riscv/riscv.ac
@@ -20,13 +20,3 @@ AC_ARG_ENABLE([64bit], AS_HELP_STRING([--disable-64bit], [Disable 64-bit mode]))
 AS_IF([test "x$enable_64bit" != "xno"], [
   AC_DEFINE([RISCV_ENABLE_64BIT],,[Define if 64-bit mode is supported])
 ])
-
-AC_ARG_ENABLE([rvc], AS_HELP_STRING([--enable-rvc], [Enable instruction compression]))
-AS_IF([test "x$enable_rvc" = "xyes"], [
-  AC_DEFINE([RISCV_ENABLE_RVC],,[Define if instruction compression is supported])
-])
-
-AC_ARG_ENABLE([vec], AS_HELP_STRING([--disable-vec], [Disable vector processor]))
-AS_IF([test "x$enable_vec" != "xno"], [
-  AC_DEFINE([RISCV_ENABLE_VEC],,[Define if vector processor is supported])
-])