1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 Google, Inc
* Copyright 2014 Rockchip Inc.
*/
#include <clk.h>
#include <display.h>
#include <dm.h>
#include <dm/device_compat.h>
#include <edid.h>
#include <log.h>
#include <regmap.h>
#include <reset.h>
#include <syscon.h>
#include <video.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/edp_rk3288.h>
#include <asm/arch-rockchip/vop_rk3288.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include <efi.h>
#include <efi_loader.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <power/regulator.h>
#include "rk_vop.h"
DECLARE_GLOBAL_DATA_PTR;
enum vop_pol {
HSYNC_POSITIVE = 0,
VSYNC_POSITIVE = 1,
DEN_NEGATIVE = 2,
DCLK_INVERT = 3
};
static void rkvop_enable(struct udevice *dev, ulong fbbase,
int fb_bits_per_pixel,
const struct display_timing *edid,
struct reset_ctl *dclk_rst)
{
struct rk_vop_priv *priv = dev_get_priv(dev);
struct rk3288_vop *regs = priv->regs;
struct rk3288_vop *win_regs = priv->regs + priv->win_offset;
u32 lb_mode;
u32 rgb_mode;
u32 hactive = edid->hactive.typ;
u32 vactive = edid->vactive.typ;
int ret;
writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1),
&win_regs->win0_act_info);
writel(V_DSP_XST(edid->hsync_len.typ + edid->hback_porch.typ) |
V_DSP_YST(edid->vsync_len.typ + edid->vback_porch.typ),
&win_regs->win0_dsp_st);
writel(V_DSP_WIDTH(hactive - 1) |
V_DSP_HEIGHT(vactive - 1),
&win_regs->win0_dsp_info);
clrsetbits_le32(&win_regs->win0_color_key, M_WIN0_KEY_EN | M_WIN0_KEY_COLOR,
V_WIN0_KEY_EN(0) | V_WIN0_KEY_COLOR(0));
switch (fb_bits_per_pixel) {
case 16:
rgb_mode = RGB565;
writel(V_RGB565_VIRWIDTH(hactive), &win_regs->win0_vir);
break;
case 24:
rgb_mode = RGB888;
writel(V_RGB888_VIRWIDTH(hactive), &win_regs->win0_vir);
break;
case 32:
default:
rgb_mode = ARGB8888;
writel(V_ARGB888_VIRWIDTH(hactive), &win_regs->win0_vir);
break;
}
if (hactive > 2560)
lb_mode = LB_RGB_3840X2;
else if (hactive > 1920)
lb_mode = LB_RGB_2560X4;
else if (hactive > 1280)
lb_mode = LB_RGB_1920X5;
else
lb_mode = LB_RGB_1280X8;
clrsetbits_le32(&win_regs->win0_ctrl0,
M_WIN0_LB_MODE | M_WIN0_DATA_FMT | M_WIN0_EN,
V_WIN0_LB_MODE(lb_mode) | V_WIN0_DATA_FMT(rgb_mode) |
V_WIN0_EN(1));
writel(fbbase, &win_regs->win0_yrgb_mst);
writel(0x01, ®s->reg_cfg_done); /* enable reg config */
ret = reset_assert(dclk_rst);
if (ret) {
dev_warn(dev, "failed to assert dclk reset (ret=%d)\n", ret);
return;
}
udelay(20);
ret = reset_deassert(dclk_rst);
if (ret)
dev_warn(dev, "failed to deassert dclk reset (ret=%d)\n", ret);
}
static void rkvop_set_pin_polarity(struct udevice *dev,
enum vop_modes mode, u32 polarity)
{
struct rkvop_driverdata *ops =
(struct rkvop_driverdata *)dev_get_driver_data(dev);
if (ops->set_pin_polarity)
ops->set_pin_polarity(dev, mode, polarity);
}
static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
{
struct rk_vop_priv *priv = dev_get_priv(dev);
struct rk3288_vop *regs = priv->regs;
/* remove from standby */
clrbits_le32(®s->sys_ctrl, V_STANDBY_EN(1));
switch (mode) {
case VOP_MODE_HDMI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_HDMI_OUT_EN(1));
break;
case VOP_MODE_EDP:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_EDP_OUT_EN(1));
break;
#if defined(CONFIG_ROCKCHIP_RK3288)
case VOP_MODE_LVDS:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_RGB_OUT_EN(1));
break;
#endif
case VOP_MODE_MIPI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_MIPI_OUT_EN(1));
break;
default:
debug("%s: unsupported output mode %x\n", __func__, mode);
}
}
static void rkvop_mode_set(struct udevice *dev,
const struct display_timing *edid,
enum vop_modes mode)
{
struct rk_vop_priv *priv = dev_get_priv(dev);
struct rk3288_vop *regs = priv->regs;
struct rk3288_vop *dsp_regs = priv->regs + priv->dsp_offset;
struct rkvop_driverdata *data =
(struct rkvop_driverdata *)dev_get_driver_data(dev);
u32 hactive = edid->hactive.typ;
u32 vactive = edid->vactive.typ;
u32 hsync_len = edid->hsync_len.typ;
u32 hback_porch = edid->hback_porch.typ;
u32 vsync_len = edid->vsync_len.typ;
u32 vback_porch = edid->vback_porch.typ;
u32 hfront_porch = edid->hfront_porch.typ;
u32 vfront_porch = edid->vfront_porch.typ;
int mode_flags;
u32 pin_polarity;
pin_polarity = BIT(DCLK_INVERT);
if (edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)
pin_polarity |= BIT(HSYNC_POSITIVE);
if (edid->flags & DISPLAY_FLAGS_VSYNC_HIGH)
pin_polarity |= BIT(VSYNC_POSITIVE);
rkvop_set_pin_polarity(dev, mode, pin_polarity);
rkvop_enable_output(dev, mode);
mode_flags = 0; /* RGB888 */
if ((data->features & VOP_FEATURE_OUTPUT_10BIT) &&
(mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP))
mode_flags = 15; /* RGBaaa */
clrsetbits_le32(®s->dsp_ctrl0, M_DSP_OUT_MODE,
V_DSP_OUT_MODE(mode_flags));
writel(V_HSYNC(hsync_len) |
V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch),
&dsp_regs->dsp_htotal_hs_end);
writel(V_HEAP(hsync_len + hback_porch + hactive) |
V_HASP(hsync_len + hback_porch),
&dsp_regs->dsp_hact_st_end);
writel(V_VSYNC(vsync_len) |
V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch),
&dsp_regs->dsp_vtotal_vs_end);
writel(V_VAEP(vsync_len + vback_porch + vactive)|
V_VASP(vsync_len + vback_porch),
&dsp_regs->dsp_vact_st_end);
writel(V_HEAP(hsync_len + hback_porch + hactive) |
V_HASP(hsync_len + hback_porch),
&dsp_regs->post_dsp_hact_info);
writel(V_VAEP(vsync_len + vback_porch + vactive)|
V_VASP(vsync_len + vback_porch),
&dsp_regs->post_dsp_vact_info);
writel(0x01, ®s->reg_cfg_done); /* enable reg config */
}
/**
* rk_display_init() - Try to enable the given display device
*
* This function performs many steps:
* - Finds the display device being referenced by @ep_node
* - Puts the VOP's ID into its uclass platform data
* - Probes the device to set it up
* - Reads the EDID timing information
* - Sets up the VOP clocks, etc. for the selected pixel clock and display mode
* - Enables the display (the display device handles this and will do different
* things depending on the display type)
* - Tells the uclass about the display resolution so that the console will
* appear correctly
*
* @dev: VOP device that we want to connect to the display
* @fbbase: Frame buffer address
* @ep_node: Device tree node to process - this is the offset of an endpoint
* node within the VOP's 'port' list.
* Return: 0 if OK, -ve if something went wrong
*/
static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node)
{
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
int vop_id, remote_vop_id;
struct display_timing timing;
struct udevice *disp;
int ret;
u32 remote_phandle;
struct display_plat *disp_uc_plat;
struct clk clk;
enum video_log2_bpp l2bpp;
ofnode remote;
const char *compat;
struct reset_ctl dclk_rst;
debug("%s(%s, 0x%lx, %s)\n", __func__,
dev_read_name(dev), fbbase, ofnode_get_name(ep_node));
ret = ofnode_read_u32(ep_node, "remote-endpoint", &remote_phandle);
if (ret)
return ret;
remote = ofnode_get_by_phandle(remote_phandle);
if (!ofnode_valid(remote))
return -EINVAL;
remote_vop_id = ofnode_read_u32_default(remote, "reg", -1);
debug("remote vop_id=%d\n", remote_vop_id);
/*
* The remote-endpoint references into a subnode of the encoder
* (i.e. HDMI, MIPI, etc.) with the DTS looking something like
* the following (assume 'hdmi_in_vopl' to be referenced):
*
* hdmi: hdmi@ff940000 {
* ports {
* hdmi_in: port {
* hdmi_in_vopb: endpoint@0 { ... };
* hdmi_in_vopl: endpoint@1 { ... };
* }
* }
* }
*
* The original code had 3 steps of "walking the parent", but
* a much better (as in: less likely to break if the DTS
* changes) way of doing this is to "find the enclosing device
* of UCLASS_DISPLAY".
*/
while (ofnode_valid(remote)) {
remote = ofnode_get_parent(remote);
if (!ofnode_valid(remote)) {
debug("%s(%s): no UCLASS_DISPLAY for remote-endpoint\n",
__func__, dev_read_name(dev));
return -EINVAL;
}
uclass_find_device_by_ofnode(UCLASS_DISPLAY, remote, &disp);
if (disp)
break;
};
compat = ofnode_get_property(remote, "compatible", NULL);
if (!compat) {
debug("%s(%s): Failed to find compatible property\n",
__func__, dev_read_name(dev));
return -EINVAL;
}
if (strstr(compat, "edp") ||
strstr(compat, "rk3288-dp")) {
vop_id = VOP_MODE_EDP;
} else if (strstr(compat, "mipi")) {
vop_id = VOP_MODE_MIPI;
} else if (strstr(compat, "hdmi")) {
vop_id = VOP_MODE_HDMI;
} else if (strstr(compat, "cdn-dp")) {
vop_id = VOP_MODE_DP;
} else if (strstr(compat, "lvds")) {
vop_id = VOP_MODE_LVDS;
} else {
debug("%s(%s): Failed to find vop mode for %s\n",
__func__, dev_read_name(dev), compat);
return -EINVAL;
}
debug("vop_id=%d\n", vop_id);
disp_uc_plat = dev_get_uclass_plat(disp);
debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);
if (display_in_use(disp)) {
debug(" - device in use\n");
return -EBUSY;
}
disp_uc_plat->source_id = remote_vop_id;
disp_uc_plat->src_dev = dev;
ret = device_probe(disp);
if (ret) {
debug("%s: device '%s' display won't probe (ret=%d)\n",
__func__, dev->name, ret);
return ret;
}
ret = display_read_timing(disp, &timing);
if (ret) {
debug("%s: Failed to read timings\n", __func__);
return ret;
}
ret = clk_get_by_index(dev, 1, &clk);
if (!ret)
ret = clk_set_rate(&clk, timing.pixelclock.typ);
if (IS_ERR_VALUE(ret)) {
debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret);
return ret;
}
/* Set bitwidth for vop display according to vop mode */
switch (vop_id) {
case VOP_MODE_EDP:
#if defined(CONFIG_ROCKCHIP_RK3288)
case VOP_MODE_LVDS:
#endif
l2bpp = VIDEO_BPP16;
break;
case VOP_MODE_HDMI:
case VOP_MODE_MIPI:
l2bpp = VIDEO_BPP32;
break;
default:
l2bpp = VIDEO_BPP16;
}
rkvop_mode_set(dev, &timing, vop_id);
ret = reset_get_by_name(dev, "dclk", &dclk_rst);
if (ret) {
dev_err(dev, "failed to get dclk reset (ret=%d)\n", ret);
return ret;
}
rkvop_enable(dev, fbbase, 1 << l2bpp, &timing, &dclk_rst);
ret = display_enable(disp, 1 << l2bpp, &timing);
if (ret)
return ret;
uc_priv->xsize = timing.hactive.typ;
uc_priv->ysize = timing.vactive.typ;
uc_priv->bpix = l2bpp;
debug("fb=%lx, size=%d %d\n", fbbase, uc_priv->xsize, uc_priv->ysize);
return 0;
}
void rk_vop_probe_regulators(struct udevice *dev,
const char * const *names, int cnt)
{
int i, ret;
const char *name;
struct udevice *reg;
for (i = 0; i < cnt; ++i) {
name = names[i];
debug("%s: probing regulator '%s'\n", dev->name, name);
ret = regulator_autoset_by_name(name, ®);
if (!ret)
ret = regulator_set_enable(reg, true);
}
}
int rk_vop_probe(struct udevice *dev)
{
struct video_uc_plat *plat = dev_get_uclass_plat(dev);
struct rk_vop_priv *priv = dev_get_priv(dev);
struct rkvop_driverdata *ops =
(struct rkvop_driverdata *)dev_get_driver_data(dev);
int ret = 0;
ofnode port, node;
struct reset_ctl ahb_rst;
/* Before relocation we don't need to do anything */
if (!(gd->flags & GD_FLG_RELOC))
return 0;
ret = reset_get_by_name(dev, "ahb", &ahb_rst);
if (ret) {
dev_err(dev, "failed to get ahb reset (ret=%d)\n", ret);
return ret;
}
ret = reset_assert(&ahb_rst);
if (ret) {
dev_err(dev, "failed to assert ahb reset (ret=%d)\n", ret);
return ret;
}
udelay(20);
ret = reset_deassert(&ahb_rst);
if (ret) {
dev_err(dev, "failed to deassert ahb reset (ret=%d)\n", ret);
return ret;
}
#if defined(CONFIG_EFI_LOADER)
debug("Adding to EFI map %d @ %lx\n", plat->size, plat->base);
efi_add_memory_map(plat->base, plat->size, EFI_RESERVED_MEMORY_TYPE);
#endif
priv->regs = dev_read_addr_ptr(dev);
priv->win_offset = ops->win_offset;
priv->dsp_offset = ops->dsp_offset;
/*
* Try all the ports until we find one that works. In practice this
* tries EDP first if available, then HDMI.
*
* Note that rockchip_vop_set_clk() always uses NPLL as the source
* clock so it is currently not possible to use more than one display
* device simultaneously.
*/
port = dev_read_subnode(dev, "port");
if (!ofnode_valid(port)) {
debug("%s(%s): 'port' subnode not found\n",
__func__, dev_read_name(dev));
return -EINVAL;
}
for (node = ofnode_first_subnode(port);
ofnode_valid(node);
node = dev_read_next_subnode(node)) {
ret = rk_display_init(dev, plat->base, node);
if (ret)
debug("Device failed: ret=%d\n", ret);
if (!ret)
break;
}
video_set_flush_dcache(dev, 1);
return ret;
}
int rk_vop_bind(struct udevice *dev)
{
struct video_uc_plat *plat = dev_get_uclass_plat(dev);
plat->size = 4 * (CONFIG_VIDEO_ROCKCHIP_MAX_XRES *
CONFIG_VIDEO_ROCKCHIP_MAX_YRES);
return 0;
}
|