aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/xilinx_axi_mrmac.c
blob: 6d15386c66ca8894725b42c0c825fdfb4c658788 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
// SPDX-License-Identifier: GPL-2.0
/*
 * Xilinx Multirate Ethernet MAC(MRMAC) driver
 *
 * Author(s):   Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
 *              Michal Simek <michal.simek@xilinx.com>
 *
 * Copyright (C) 2021 Xilinx, Inc. All rights reserved.
 */

#include <config.h>
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <log.h>
#include <net.h>
#include <malloc.h>
#include <wait_bit.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include "xilinx_axi_mrmac.h"

static void axi_mrmac_dma_write(struct mcdma_bd *bd, u32 *desc)
{
	if (IS_ENABLED(CONFIG_PHYS_64BIT))
		writeq((unsigned long)bd, desc);
	else
		writel((uintptr_t)bd, desc);
}

/**
 * axi_mrmac_ethernet_init - MRMAC init function
 * @priv:	MRMAC private structure
 *
 * Return:	0 on success, negative value on errors
 *
 * This function is called to reset and initialize MRMAC core. This is
 * typically called during initialization. It does a reset of MRMAC Rx/Tx
 * channels and Rx/Tx SERDES. It configures MRMAC speed based on mrmac_rate
 * which is read from DT. This function waits for block lock bit to get set,
 * if it is not set within 100ms time returns a timeout error.
 */
static int axi_mrmac_ethernet_init(struct axi_mrmac_priv *priv)
{
	struct mrmac_regs *regs = priv->iobase;
	u32 reg;
	u32 ret;

	/* Perform all the RESET's required */
	setbits_le32(&regs->reset, MRMAC_RX_SERDES_RST_MASK | MRMAC_RX_RST_MASK
		     | MRMAC_TX_SERDES_RST_MASK | MRMAC_TX_RST_MASK);

	mdelay(MRMAC_RESET_DELAY);

	/* Configure Mode register */
	reg = readl(&regs->mode);

	log_debug("Configuring MRMAC speed to %d\n", priv->mrmac_rate);

	if (priv->mrmac_rate == SPEED_25000) {
		reg &= ~MRMAC_CTL_RATE_CFG_MASK;
		reg |= MRMAC_CTL_DATA_RATE_25G;
		reg |= (MRMAC_CTL_AXIS_CFG_25G_IND << MRMAC_CTL_AXIS_CFG_SHIFT);
		reg |= (MRMAC_CTL_SERDES_WIDTH_25G <<
			MRMAC_CTL_SERDES_WIDTH_SHIFT);
	} else {
		reg &= ~MRMAC_CTL_RATE_CFG_MASK;
		reg |= MRMAC_CTL_DATA_RATE_10G;
		reg |= (MRMAC_CTL_AXIS_CFG_10G_IND << MRMAC_CTL_AXIS_CFG_SHIFT);
		reg |= (MRMAC_CTL_SERDES_WIDTH_10G <<
			MRMAC_CTL_SERDES_WIDTH_SHIFT);
	}

	/* For tick reg */
	reg |= MRMAC_CTL_PM_TICK_MASK;
	writel(reg, &regs->mode);

	clrbits_le32(&regs->reset, MRMAC_RX_SERDES_RST_MASK | MRMAC_RX_RST_MASK
		     | MRMAC_TX_SERDES_RST_MASK | MRMAC_TX_RST_MASK);

	mdelay(MRMAC_RESET_DELAY);

	/* Setup MRMAC hardware options */
	setbits_le32(&regs->rx_config, MRMAC_RX_DEL_FCS_MASK);
	setbits_le32(&regs->tx_config, MRMAC_TX_INS_FCS_MASK);
	setbits_le32(&regs->tx_config, MRMAC_TX_EN_MASK);
	setbits_le32(&regs->rx_config, MRMAC_RX_EN_MASK);

	/* Check for block lock bit to be set. This ensures that
	 * MRMAC ethernet IP is functioning normally.
	 */
	writel(MRMAC_STS_ALL_MASK, (phys_addr_t)priv->iobase +
		MRMAC_TX_STS_OFFSET);
	writel(MRMAC_STS_ALL_MASK, (phys_addr_t)priv->iobase +
		MRMAC_RX_STS_OFFSET);
	writel(MRMAC_STS_ALL_MASK, (phys_addr_t)priv->iobase +
		MRMAC_STATRX_BLKLCK_OFFSET);

	ret = wait_for_bit_le32((u32 *)((phys_addr_t)priv->iobase +
				MRMAC_STATRX_BLKLCK_OFFSET),
				MRMAC_RX_BLKLCK_MASK, true,
				MRMAC_BLKLCK_TIMEOUT, true);
	if (ret) {
		log_warning("Error: MRMAC block lock not complete!\n");
		return -EIO;
	}

	writel(MRMAC_TICK_TRIGGER, &regs->tick_reg);

	return 0;
}

/**
 * axi_mcdma_init - Reset MCDMA engine
 * @priv:	MRMAC private structure
 *
 * Return:	0 on success, negative value on timeouts
 *
 * This function is called to reset and initialize MCDMA engine
 */
static int axi_mcdma_init(struct axi_mrmac_priv *priv)
{
	u32 ret;

	/* Reset the engine so the hardware starts from a known state */
	writel(XMCDMA_CR_RESET, &priv->mm2s_cmn->control);
	writel(XMCDMA_CR_RESET, &priv->s2mm_cmn->control);

	/* Check Tx/Rx MCDMA.RST. Reset is done when the reset bit is low */
	ret = wait_for_bit_le32(&priv->mm2s_cmn->control, XMCDMA_CR_RESET,
				false, MRMAC_DMARST_TIMEOUT, true);
	if (ret) {
		log_warning("Tx MCDMA reset Timeout\n");
		return -ETIMEDOUT;
	}

	ret = wait_for_bit_le32(&priv->s2mm_cmn->control, XMCDMA_CR_RESET,
				false, MRMAC_DMARST_TIMEOUT, true);
	if (ret) {
		log_warning("Rx MCDMA reset Timeout\n");
		return -ETIMEDOUT;
	}

	/* Enable channel 1 for Tx and Rx */
	writel(XMCDMA_CHANNEL_1, &priv->mm2s_cmn->chen);
	writel(XMCDMA_CHANNEL_1, &priv->s2mm_cmn->chen);

	return 0;
}

/**
 * axi_mrmac_start - MRMAC start
 * @dev:	udevice structure
 *
 * Return:	0 on success, negative value on errors
 *
 * This is a initialization function of MRMAC. Call MCDMA initialization
 * function and setup Rx buffer descriptors for starting reception of packets.
 * Enable Tx and Rx channels and trigger Rx channel fetch.
 */
static int axi_mrmac_start(struct udevice *dev)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);
	struct mrmac_regs *regs = priv->iobase;

	/*
	 * Initialize MCDMA engine. MCDMA engine must be initialized before
	 * MRMAC. During MCDMA engine initialization, MCDMA hardware is reset,
	 * since MCDMA reset line is connected to MRMAC, this would ensure a
	 * reset of MRMAC.
	 */
	axi_mcdma_init(priv);

	/* Initialize MRMAC hardware */
	if (axi_mrmac_ethernet_init(priv))
		return -EIO;

	/* Disable all Rx interrupts before RxBD space setup */
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_IRQ_ALL_MASK);

	/* Update current descriptor */
	axi_mrmac_dma_write(priv->rx_bd[0], &priv->mcdma_rx->current);

	/* Setup Rx BD. MRMAC needs atleast two descriptors */
	memset(priv->rx_bd[0], 0, RX_BD_TOTAL_SIZE);

	priv->rx_bd[0]->next_desc = lower_32_bits((u64)priv->rx_bd[1]);
	priv->rx_bd[0]->buf_addr = lower_32_bits((u64)net_rx_packets[0]);

	priv->rx_bd[1]->next_desc = lower_32_bits((u64)priv->rx_bd[0]);
	priv->rx_bd[1]->buf_addr = lower_32_bits((u64)net_rx_packets[1]);

	if (IS_ENABLED(CONFIG_PHYS_64BIT)) {
		priv->rx_bd[0]->next_desc_msb = upper_32_bits((u64)priv->rx_bd[1]);
		priv->rx_bd[0]->buf_addr_msb = upper_32_bits((u64)net_rx_packets[0]);

		priv->rx_bd[1]->next_desc_msb = upper_32_bits((u64)priv->rx_bd[0]);
		priv->rx_bd[1]->buf_addr_msb = upper_32_bits((u64)net_rx_packets[1]);
	}

	priv->rx_bd[0]->cntrl = PKTSIZE_ALIGN;
	priv->rx_bd[1]->cntrl = PKTSIZE_ALIGN;

	/* Flush the last BD so DMA core could see the updates */
	flush_cache((phys_addr_t)priv->rx_bd[0], RX_BD_TOTAL_SIZE);

	/* It is necessary to flush rx buffers because if you don't do it
	 * then cache can contain uninitialized data
	 */
	flush_cache((phys_addr_t)priv->rx_bd[0]->buf_addr, RX_BUFF_TOTAL_SIZE);

	/* Start the hardware */
	setbits_le32(&priv->s2mm_cmn->control, XMCDMA_CR_RUNSTOP_MASK);
	setbits_le32(&priv->mm2s_cmn->control, XMCDMA_CR_RUNSTOP_MASK);
	setbits_le32(&priv->mcdma_rx->control, XMCDMA_IRQ_ALL_MASK);

	/* Channel fetch */
	setbits_le32(&priv->mcdma_rx->control, XMCDMA_CR_RUNSTOP_MASK);

	/* Update tail descriptor. Now it's ready to receive data */
	axi_mrmac_dma_write(priv->rx_bd[1], &priv->mcdma_rx->tail);

	/* Enable Tx */
	setbits_le32(&regs->tx_config, MRMAC_TX_EN_MASK);

	/* Enable Rx */
	setbits_le32(&regs->rx_config, MRMAC_RX_EN_MASK);

	return 0;
}

/**
 * axi_mrmac_send - MRMAC Tx function
 * @dev:	udevice structure
 * @ptr:	pointer to Tx buffer
 * @len:	transfer length
 *
 * Return:	0 on success, negative value on errors
 *
 * This is a Tx send function of MRMAC. Setup Tx buffer descriptors and trigger
 * transfer. Wait till the data is transferred.
 */
static int axi_mrmac_send(struct udevice *dev, void *ptr, int len)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);
	u32 ret;

#ifdef DEBUG
	print_buffer(ptr, ptr, 1, len, 16);
#endif
	if (len > PKTSIZE_ALIGN)
		len = PKTSIZE_ALIGN;

	/* If size is less than min packet size, pad to min size */
	if (len < MIN_PKT_SIZE) {
		memset(priv->txminframe, 0, MIN_PKT_SIZE);
		memcpy(priv->txminframe, ptr, len);
		len = MIN_PKT_SIZE;
		ptr = priv->txminframe;
	}

	writel(XMCDMA_IRQ_ALL_MASK, &priv->mcdma_tx->status);

	clrbits_le32(&priv->mcdma_tx->control, XMCDMA_CR_RUNSTOP_MASK);

	/* Flush packet to main memory to be trasfered by DMA */
	flush_cache((phys_addr_t)ptr, len);

	/* Setup Tx BD. MRMAC needs atleast two descriptors */
	memset(priv->tx_bd[0], 0, TX_BD_TOTAL_SIZE);

	priv->tx_bd[0]->next_desc = lower_32_bits((u64)priv->tx_bd[1]);
	priv->tx_bd[0]->buf_addr = lower_32_bits((u64)ptr);

	/* At the end of the ring, link the last BD back to the top */
	priv->tx_bd[1]->next_desc = lower_32_bits((u64)priv->tx_bd[0]);
	priv->tx_bd[1]->buf_addr = lower_32_bits((u64)ptr + len / 2);

	if (IS_ENABLED(CONFIG_PHYS_64BIT)) {
		priv->tx_bd[0]->next_desc_msb = upper_32_bits((u64)priv->tx_bd[1]);
		priv->tx_bd[0]->buf_addr_msb = upper_32_bits((u64)ptr);

		priv->tx_bd[1]->next_desc_msb = upper_32_bits((u64)priv->tx_bd[0]);
		priv->tx_bd[1]->buf_addr_msb = upper_32_bits((u64)ptr + len / 2);
	}

	/* Split Tx data in to half and send in two descriptors */
	priv->tx_bd[0]->cntrl = (len / 2) | XMCDMA_BD_CTRL_TXSOF_MASK;
	priv->tx_bd[1]->cntrl = (len - len / 2) | XMCDMA_BD_CTRL_TXEOF_MASK;

	/* Flush the last BD so DMA core could see the updates */
	flush_cache((phys_addr_t)priv->tx_bd[0], TX_BD_TOTAL_SIZE);

	if (readl(&priv->mcdma_tx->status) & XMCDMA_CH_IDLE) {
		axi_mrmac_dma_write(priv->tx_bd[0], &priv->mcdma_tx->current);
		/* Channel fetch */
		setbits_le32(&priv->mcdma_tx->control, XMCDMA_CR_RUNSTOP_MASK);
	} else {
		log_warning("Error: current desc is not updated\n");
		return -EIO;
	}

	setbits_le32(&priv->mcdma_tx->control, XMCDMA_IRQ_ALL_MASK);

	/* Start transfer */
	axi_mrmac_dma_write(priv->tx_bd[1], &priv->mcdma_tx->tail);

	/* Wait for transmission to complete */
	ret = wait_for_bit_le32(&priv->mcdma_tx->status, XMCDMA_IRQ_IOC_MASK,
				true, 1, true);
	if (ret) {
		log_warning("%s: Timeout\n", __func__);
		return -ETIMEDOUT;
	}

	/* Clear status */
	priv->tx_bd[0]->sband_stats = 0;
	priv->tx_bd[1]->sband_stats = 0;

	log_debug("Sending complete\n");

	return 0;
}

static bool isrxready(struct axi_mrmac_priv *priv)
{
	u32 status;

	/* Read pending interrupts */
	status = readl(&priv->mcdma_rx->status);

	/* Acknowledge pending interrupts */
	writel(status & XMCDMA_IRQ_ALL_MASK, &priv->mcdma_rx->status);

	/*
	 * If Reception done interrupt is asserted, call Rx call back function
	 * to handle the processed BDs and then raise the according flag.
	 */
	if (status & (XMCDMA_IRQ_IOC_MASK | XMCDMA_IRQ_DELAY_MASK))
		return 1;

	return 0;
}

/**
 * axi_mrmac_recv - MRMAC Rx function
 * @dev:	udevice structure
 * @flags:	flags from network stack
 * @packetp	pointer to received data
 *
 * Return:	received data length on success, negative value on errors
 *
 * This is a Rx function of MRMAC. Check if any data is received on MCDMA.
 * Copy buffer pointer to packetp and return received data length.
 */
static int axi_mrmac_recv(struct udevice *dev, int flags, uchar **packetp)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);
	u32 rx_bd_end;
	u32 length;

	/* Wait for an incoming packet */
	if (!isrxready(priv))
		return -EAGAIN;

	/* Clear all interrupts */
	writel(XMCDMA_IRQ_ALL_MASK, &priv->mcdma_rx->status);

	/* Disable IRQ for a moment till packet is handled */
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_IRQ_ALL_MASK);

	/* Disable channel fetch */
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_CR_RUNSTOP_MASK);

	rx_bd_end = (ulong)priv->rx_bd[0] + roundup(RX_BD_TOTAL_SIZE,
						    ARCH_DMA_MINALIGN);
	/* Invalidate Rx descriptors to see proper Rx length */
	invalidate_dcache_range((phys_addr_t)priv->rx_bd[0], rx_bd_end);

	length = priv->rx_bd[0]->status & XMCDMA_BD_STS_ACTUAL_LEN_MASK;
	*packetp = (uchar *)(ulong)priv->rx_bd[0]->buf_addr;

	if (!length) {
		length = priv->rx_bd[1]->status & XMCDMA_BD_STS_ACTUAL_LEN_MASK;
		*packetp = (uchar *)(ulong)priv->rx_bd[1]->buf_addr;
	}

#ifdef DEBUG
	print_buffer(*packetp, *packetp, 1, length, 16);
#endif
	/* Clear status */
	priv->rx_bd[0]->status = 0;
	priv->rx_bd[1]->status = 0;

	return length;
}

/**
 * axi_mrmac_free_pkt - MRMAC free packet function
 * @dev:	udevice structure
 * @packet:	receive buffer pointer
 * @length	received data length
 *
 * Return:	0 on success, negative value on errors
 *
 * This is Rx free packet function of MRMAC. Prepare MRMAC for reception of
 * data again. Invalidate previous data from Rx buffers and set Rx buffer
 * descriptors. Trigger reception by updating tail descriptor.
 */
static int axi_mrmac_free_pkt(struct udevice *dev, uchar *packet, int length)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);

#ifdef DEBUG
	/* It is useful to clear buffer to be sure that it is consistent */
	memset(priv->rx_bd[0]->buf_addr, 0, RX_BUFF_TOTAL_SIZE);
#endif
	/* Disable all Rx interrupts before RxBD space setup */
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_IRQ_ALL_MASK);

	/* Disable channel fetch */
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_CR_RUNSTOP_MASK);

	/* Update current descriptor */
	axi_mrmac_dma_write(priv->rx_bd[0], &priv->mcdma_rx->current);

	/* Write bd to HW */
	flush_cache((phys_addr_t)priv->rx_bd[0], RX_BD_TOTAL_SIZE);

	/* It is necessary to flush rx buffers because if you don't do it
	 * then cache will contain previous packet
	 */
	flush_cache((phys_addr_t)priv->rx_bd[0]->buf_addr, RX_BUFF_TOTAL_SIZE);

	/* Enable all IRQ */
	setbits_le32(&priv->mcdma_rx->control, XMCDMA_IRQ_ALL_MASK);

	/* Channel fetch */
	setbits_le32(&priv->mcdma_rx->control, XMCDMA_CR_RUNSTOP_MASK);

	/* Update tail descriptor. Now it's ready to receive data */
	axi_mrmac_dma_write(priv->rx_bd[1], &priv->mcdma_rx->tail);

	log_debug("Rx completed, framelength = %x\n", length);

	return 0;
}

/**
 * axi_mrmac_stop - Stop MCDMA transfers
 * @dev:	udevice structure
 *
 * Return:	0 on success, negative value on errors
 *
 * Stop MCDMA engine for both Tx and Rx transfers.
 */
static void axi_mrmac_stop(struct udevice *dev)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);

	/* Stop the hardware */
	clrbits_le32(&priv->mcdma_tx->control, XMCDMA_CR_RUNSTOP_MASK);
	clrbits_le32(&priv->mcdma_rx->control, XMCDMA_CR_RUNSTOP_MASK);

	log_debug("Halted\n");
}

static int axi_mrmac_probe(struct udevice *dev)
{
	struct axi_mrmac_plat *plat = dev_get_plat(dev);
	struct eth_pdata *pdata = &plat->eth_pdata;
	struct axi_mrmac_priv *priv = dev_get_priv(dev);

	priv->iobase = (struct mrmac_regs *)pdata->iobase;

	priv->mm2s_cmn = plat->mm2s_cmn;
	priv->mcdma_tx = (struct mcdma_chan_reg *)((phys_addr_t)priv->mm2s_cmn
						   + XMCDMA_CHAN_OFFSET);
	priv->s2mm_cmn = (struct mcdma_common_regs *)((phys_addr_t)priv->mm2s_cmn
						      + XMCDMA_RX_OFFSET);
	priv->mcdma_rx = (struct mcdma_chan_reg *)((phys_addr_t)priv->s2mm_cmn
						   + XMCDMA_CHAN_OFFSET);
	priv->mrmac_rate = plat->mrmac_rate;

	/* Align buffers to ARCH_DMA_MINALIGN */
	priv->tx_bd[0] = memalign(ARCH_DMA_MINALIGN, TX_BD_TOTAL_SIZE);
	priv->tx_bd[1] = (struct mcdma_bd *)((ulong)priv->tx_bd[0] +
					     sizeof(struct mcdma_bd));

	priv->rx_bd[0] = memalign(ARCH_DMA_MINALIGN, RX_BD_TOTAL_SIZE);
	priv->rx_bd[1] = (struct mcdma_bd *)((ulong)priv->rx_bd[0] +
					     sizeof(struct mcdma_bd));

	priv->txminframe = memalign(ARCH_DMA_MINALIGN, MIN_PKT_SIZE);

	return 0;
}

static int axi_mrmac_remove(struct udevice *dev)
{
	struct axi_mrmac_priv *priv = dev_get_priv(dev);

	/* Free buffer descriptors */
	free(priv->tx_bd[0]);
	free(priv->rx_bd[0]);
	free(priv->txminframe);

	return 0;
}

static int axi_mrmac_of_to_plat(struct udevice *dev)
{
	struct axi_mrmac_plat *plat = dev_get_plat(dev);
	struct eth_pdata *pdata = &plat->eth_pdata;
	struct ofnode_phandle_args phandle_args;
	int ret = 0;

	pdata->iobase = dev_read_addr(dev);

	ret = dev_read_phandle_with_args(dev, "axistream-connected", NULL, 0, 0,
					 &phandle_args);
	if (ret) {
		log_debug("axistream not found\n");
		return -EINVAL;
	}

	plat->mm2s_cmn = (struct mcdma_common_regs *)ofnode_read_u64_default
						(phandle_args.node, "reg", -1);
	if (!plat->mm2s_cmn) {
		log_warning("MRMAC dma register space not found\n");
		return -EINVAL;
	}

	/* Set default MRMAC rate to 10000 */
	plat->mrmac_rate = dev_read_u32_default(dev, "xlnx,mrmac-rate", 10000);

	return 0;
}

static const struct eth_ops axi_mrmac_ops = {
	.start			= axi_mrmac_start,
	.send			= axi_mrmac_send,
	.recv			= axi_mrmac_recv,
	.free_pkt		= axi_mrmac_free_pkt,
	.stop			= axi_mrmac_stop,
};

static const struct udevice_id axi_mrmac_ids[] = {
	{ .compatible = "xlnx,mrmac-ethernet-1.0" },
	{ }
};

U_BOOT_DRIVER(axi_mrmac) = {
	.name   = "axi_mrmac",
	.id     = UCLASS_ETH,
	.of_match = axi_mrmac_ids,
	.of_to_plat = axi_mrmac_of_to_plat,
	.probe  = axi_mrmac_probe,
	.remove = axi_mrmac_remove,
	.ops    = &axi_mrmac_ops,
	.priv_auto = sizeof(struct axi_mrmac_priv),
	.plat_auto = sizeof(struct axi_mrmac_plat),
};