aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy/atheros.c
blob: f922fecd6b5d9a61098833fc2ef6dfbcf12bb8e0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
// SPDX-License-Identifier: GPL-2.0+
/*
 * Atheros PHY drivers
 *
 * Copyright 2011, 2013 Freescale Semiconductor, Inc.
 * author Andy Fleming
 * Copyright (c) 2019 Michael Walle <michael@walle.cc>
 */
#include <common.h>
#include <phy.h>
#include <dm/device_compat.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <dt-bindings/net/qca-ar803x.h>

#define AR803x_PHY_DEBUG_ADDR_REG	0x1d
#define AR803x_PHY_DEBUG_DATA_REG	0x1e

/* Debug registers */
#define AR803x_DEBUG_REG_0		0x0
#define AR803x_RGMII_RX_CLK_DLY		BIT(15)

#define AR803x_DEBUG_REG_5		0x5
#define AR803x_RGMII_TX_CLK_DLY		BIT(8)

#define AR803x_DEBUG_REG_1F		0x1f
#define AR803x_PLL_ON			BIT(2)
#define AR803x_RGMII_1V8		BIT(3)

/* CLK_25M register is at MMD 7, address 0x8016 */
#define AR803x_CLK_25M_SEL_REG		0x8016

#define AR803x_CLK_25M_MASK		GENMASK(4, 2)
#define AR803x_CLK_25M_25MHZ_XTAL	0
#define AR803x_CLK_25M_25MHZ_DSP	1
#define AR803x_CLK_25M_50MHZ_PLL	2
#define AR803x_CLK_25M_50MHZ_DSP	3
#define AR803x_CLK_25M_62_5MHZ_PLL	4
#define AR803x_CLK_25M_62_5MHZ_DSP	5
#define AR803x_CLK_25M_125MHZ_PLL	6
#define AR803x_CLK_25M_125MHZ_DSP	7
#define AR8035_CLK_25M_MASK		GENMASK(4, 3)

#define AR803x_CLK_25M_DR_MASK		GENMASK(8, 7)
#define AR803x_CLK_25M_DR_FULL		0
#define AR803x_CLK_25M_DR_HALF		1
#define AR803x_CLK_25M_DR_QUARTER	2

#define AR8021_PHY_ID 0x004dd040
#define AR8031_PHY_ID 0x004dd074
#define AR8035_PHY_ID 0x004dd072

struct ar803x_priv {
	int flags;
#define AR803x_FLAG_KEEP_PLL_ENABLED	BIT(0) /* don't turn off internal PLL */
#define AR803x_FLAG_RGMII_1V8		BIT(1) /* use 1.8V RGMII I/O voltage */
	u16 clk_25m_reg;
	u16 clk_25m_mask;
};

static int ar803x_debug_reg_read(struct phy_device *phydev, u16 reg)
{
	int ret;

	ret = phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG,
			reg);
	if (ret < 0)
		return ret;

	return phy_read(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG);
}

static int ar803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
				 u16 clear, u16 set)
{
	int val;

	val = ar803x_debug_reg_read(phydev, reg);
	if (val < 0)
		return val;

	val &= 0xffff;
	val &= ~clear;
	val |= set;

	return phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG,
			 val);
}

static int ar803x_enable_rx_delay(struct phy_device *phydev, bool on)
{
	u16 clear = 0, set = 0;

	if (on)
		set = AR803x_RGMII_RX_CLK_DLY;
	else
		clear = AR803x_RGMII_RX_CLK_DLY;

	return ar803x_debug_reg_mask(phydev, AR803x_DEBUG_REG_0, clear, set);
}

static int ar803x_enable_tx_delay(struct phy_device *phydev, bool on)
{
	u16 clear = 0, set = 0;

	if (on)
		set = AR803x_RGMII_TX_CLK_DLY;
	else
		clear = AR803x_RGMII_TX_CLK_DLY;

	return ar803x_debug_reg_mask(phydev, AR803x_DEBUG_REG_5, clear, set);
}

static int ar8021_config(struct phy_device *phydev)
{
	phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
		  BMCR_ANENABLE | BMCR_ANRESTART);

	ar803x_enable_tx_delay(phydev, true);

	phydev->supported = phydev->drv->features;
	return 0;
}

static int ar803x_delay_config(struct phy_device *phydev)
{
	int ret;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
		ret = ar803x_enable_tx_delay(phydev, true);
	else
		ret = ar803x_enable_tx_delay(phydev, false);

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
		ret = ar803x_enable_rx_delay(phydev, true);
	else
		ret = ar803x_enable_rx_delay(phydev, false);

	return ret;
}

static int ar803x_regs_config(struct phy_device *phydev)
{
	struct ar803x_priv *priv = phydev->priv;
	u16 set = 0, clear = 0;
	int val;
	int ret;

	/* no configuration available */
	if (!priv)
		return 0;

	/*
	 * Only supported on the AR8031, AR8035 has strappings for the PLL mode
	 * as well as the RGMII voltage.
	 */
	if (phydev->drv->uid == AR8031_PHY_ID) {
		if (priv->flags & AR803x_FLAG_KEEP_PLL_ENABLED)
			set |= AR803x_PLL_ON;
		else
			clear |= AR803x_PLL_ON;

		if (priv->flags & AR803x_FLAG_RGMII_1V8)
			set |= AR803x_RGMII_1V8;
		else
			clear |= AR803x_RGMII_1V8;

		ret = ar803x_debug_reg_mask(phydev, AR803x_DEBUG_REG_1F, clear,
					    set);
		if (ret < 0)
			return ret;
	}

	/* save the write access if the mask is empty */
	if (priv->clk_25m_mask) {
		val = phy_read_mmd(phydev, MDIO_MMD_AN, AR803x_CLK_25M_SEL_REG);
		if (val < 0)
			return val;
		val &= ~priv->clk_25m_mask;
		val |= priv->clk_25m_reg;
		ret = phy_write_mmd(phydev, MDIO_MMD_AN,
				    AR803x_CLK_25M_SEL_REG, val);
		if (ret < 0)
			return ret;
	}

	return 0;
}

static int ar803x_of_init(struct phy_device *phydev)
{
#if defined(CONFIG_DM_ETH)
	struct ar803x_priv *priv;
	ofnode node, vddio_reg_node;
	u32 strength, freq, min_uV, max_uV;
	int sel;

	node = phy_get_ofnode(phydev);
	if (!ofnode_valid(node))
		return -EINVAL;

	priv = malloc(sizeof(*priv));
	if (!priv)
		return -ENOMEM;
	memset(priv, 0, sizeof(*priv));

	phydev->priv = priv;

	debug("%s: found PHY node: %s\n", __func__, ofnode_get_name(node));

	if (ofnode_read_bool(node, "qca,keep-pll-enabled"))
		priv->flags |= AR803x_FLAG_KEEP_PLL_ENABLED;

	/*
	 * We can't use the regulator framework because the regulator is
	 * a subnode of the PHY. So just read the two properties we are
	 * interested in.
	 */
	vddio_reg_node = ofnode_find_subnode(node, "vddio-regulator");
	if (ofnode_valid(vddio_reg_node)) {
		min_uV = ofnode_read_u32_default(vddio_reg_node,
						 "regulator-min-microvolt", 0);
		max_uV = ofnode_read_u32_default(vddio_reg_node,
						 "regulator-max-microvolt", 0);

		if (min_uV != max_uV) {
			free(priv);
			return -EINVAL;
		}

		switch (min_uV) {
		case 1500000:
			break;
		case 1800000:
			priv->flags |= AR803x_FLAG_RGMII_1V8;
			break;
		default:
			free(priv);
			return -EINVAL;
		}
	}

	/*
	 * Get the CLK_25M frequency from the device tree. Only XTAL and PLL
	 * sources are supported right now. There is also the possibilty to use
	 * the DSP as frequency reference, this is used for synchronous
	 * ethernet.
	 */
	if (!ofnode_read_u32(node, "qca,clk-out-frequency", &freq)) {
		switch (freq) {
		case 25000000:
			sel = AR803x_CLK_25M_25MHZ_XTAL;
			break;
		case 50000000:
			sel = AR803x_CLK_25M_50MHZ_PLL;
			break;
		case 62500000:
			sel = AR803x_CLK_25M_62_5MHZ_PLL;
			break;
		case 125000000:
			sel = AR803x_CLK_25M_125MHZ_PLL;
			break;
		default:
			dev_err(phydev->dev,
				"invalid qca,clk-out-frequency\n");
			free(priv);
			return -EINVAL;
		}

		priv->clk_25m_mask |= AR803x_CLK_25M_MASK;
		priv->clk_25m_reg |= FIELD_PREP(AR803x_CLK_25M_MASK, sel);
		/*
		 * Fixup for the AR8035 which only has two bits. The two
		 * remaining bits map to the same frequencies.
		 */

		if (phydev->drv->uid == AR8035_PHY_ID) {
			priv->clk_25m_reg &= AR8035_CLK_25M_MASK;
			priv->clk_25m_mask &= AR8035_CLK_25M_MASK;
		}
	}

	if (phydev->drv->uid == AR8031_PHY_ID &&
	    !ofnode_read_u32(node, "qca,clk-out-strength", &strength)) {
		switch (strength) {
		case AR803X_STRENGTH_FULL:
			sel = AR803x_CLK_25M_DR_FULL;
			break;
		case AR803X_STRENGTH_HALF:
			sel = AR803x_CLK_25M_DR_HALF;
			break;
		case AR803X_STRENGTH_QUARTER:
			sel = AR803x_CLK_25M_DR_QUARTER;
			break;
		default:
			dev_err(phydev->dev,
				"invalid qca,clk-out-strength\n");
			free(priv);
			return -EINVAL;
		}
		priv->clk_25m_mask |= AR803x_CLK_25M_DR_MASK;
		priv->clk_25m_reg |= FIELD_PREP(AR803x_CLK_25M_DR_MASK, sel);
	}

	debug("%s: flags=%x clk_25m_reg=%04x clk_25m_mask=%04x\n", __func__,
	      priv->flags, priv->clk_25m_reg, priv->clk_25m_mask);
#endif

	return 0;
}

static int ar803x_config(struct phy_device *phydev)
{
	int ret;

	ret = ar803x_of_init(phydev);
	if (ret < 0)
		return ret;

	ret = ar803x_delay_config(phydev);
	if (ret < 0)
		return ret;

	ret = ar803x_regs_config(phydev);
	if (ret < 0)
		return ret;

	phydev->supported = phydev->drv->features;

	genphy_config_aneg(phydev);
	genphy_restart_aneg(phydev);

	return 0;
}

static struct phy_driver AR8021_driver =  {
	.name = "AR8021",
	.uid = AR8021_PHY_ID,
	.mask = 0xfffffff0,
	.features = PHY_GBIT_FEATURES,
	.config = ar8021_config,
	.startup = genphy_startup,
	.shutdown = genphy_shutdown,
};

static struct phy_driver AR8031_driver =  {
	.name = "AR8031/AR8033",
	.uid = AR8031_PHY_ID,
	.mask = 0xffffffef,
	.features = PHY_GBIT_FEATURES,
	.config = ar803x_config,
	.startup = genphy_startup,
	.shutdown = genphy_shutdown,
};

static struct phy_driver AR8035_driver =  {
	.name = "AR8035",
	.uid = AR8035_PHY_ID,
	.mask = 0xffffffef,
	.features = PHY_GBIT_FEATURES,
	.config = ar803x_config,
	.startup = genphy_startup,
	.shutdown = genphy_shutdown,
};

int phy_atheros_init(void)
{
	phy_register(&AR8021_driver);
	phy_register(&AR8031_driver);
	phy_register(&AR8035_driver);

	return 0;
}