1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
MAXIM, MAX77663 PMIC
This device uses two drivers:
- drivers/power/pmic/max77663.c (for parent device)
- drivers/power/regulator/max77663_regulator.c (for child regulators)
This chapter describes the binding info for the PMIC driver and regulators.
Required properties for PMIC:
- compatible: "maxim,max77663"
- reg: usually 0x1c or 0x3c
With those two properties, the pmic device can be used for read/write only.
To bind each regulator, the optional regulators subnode should exists.
Optional subnode:
- name: regulators (subnode list of each device's regulator)
Regulators subnode contains set on supported regulators.
Required properties:
- regulator-name: used for regulator uclass platform data '.name',
List of supported regulator nodes names for max77663:
- sd0, sd1, sd2, sd3, ldo0, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8
Optional:
- regulator-min-microvolt: minimum allowed Voltage to set
- regulator-max-microvolt: minimum allowed Voltage to set
- regulator-always-on: regulator should be never disabled
- regulator-boot-on: regulator should be enabled by the bootloader
Linux driver binding for this driver is compatible.
Example:
max77663@1c {
compatible = "maxim,max77663";
reg = <0x1c>;
regulators {
sd0 {
regulator-name = "vdd_cpu";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
...
ldo0 {
regulator-name = "avdd_pll";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
...
ldo2 {
regulator-name = "avdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "vdd_sdmmc3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
...
ldo8 {
regulator-name = "avdd_dsi_csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
|