aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/mach-ath79
AgeCommit message (Collapse)AuthorFilesLines
2024-08-26global_data: Reduce the size of bus_clk and mem_clkSimon Glass1-2/+2
The bus clock and memory clock are unlikely to go above 4GHz for now, so reduce the field size to 32 bits. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-07-31Kconfig: Unify endian support optionJiaxun Yang1-4/+4
Move SUPPORT_BIG_ENDIAN, SUPPORT_LITTLE_ENDIAN to top-level arch Kconfig and let architectures select them as necessary. Remove if guard for Endianness selection choice so we can have one of SYS_BIG_ENDIAN, SYS_LITTLE_ENDIAN config symbol defined even on single endian system. Default endian to SYS_BIG_ENDIAN for MIPS || MICROBLAZE and LITTLE_ENDIAN for the rest to retain old config behaviour. Note: PPC, SH, Xtensa are technically bi-endian, but I checked compiled u-boot image with readelf, U-Boot currently only support little endian for SH and Xtensa, Big Endian for PPC. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
2024-07-15mips: Remove duplicate newlinesMarek Vasut1-1/+0
Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-24mips: Remove common.h usageTom Rini13-15/+0
We can remove common.h from most cases of the code here, and only a few places need an additional header instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15Convert CONFIG_USB_EHCI_IS_TDI to KconfigMarek Behún1-0/+1
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass9-0/+9
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass1-1/+3
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move hang() to the same header as panic()Simon Glass1-0/+1
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass1-0/+1
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass4-0/+4
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-12mips: add initial support for qca956x referenced boardRosy Song10-0/+1296
QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup
2019-04-12mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956XRosy Song1-2/+2
See details in chapter 8.6.2 and 8.6.4 (page 140-141) of qca9563 datasheet, NFRAC[17:0] So the mask of [17:5] is 0x1fff not 0x3fff. Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2-v3: - add more information for this commit Changes for v4-v5: - coding style cleanup
2018-07-30Kconfig: Sort bool, default, select and imply optionsMichal Simek1-5/+5
Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini19-42/+19
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini2-4/+0
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-24wait_bit: use wait_for_bit_le32 and remove wait_for_bitÁlvaro Fernández Rojas1-1/+1
wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-13board_f: Rename initdram() to dram_init()Simon Glass1-1/+1
This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05board_f: Drop return value from initdram()Simon Glass1-2/+6
At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05board_f: Drop board_type parameter from initdram()Simon Glass1-1/+1
It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2016-11-30MIPS: make inclusion of ROM exception vectors configurableDaniel Schwierzeck1-0/+2
This adds a compile time option to include code for static exception vectors. Static exception vectors are only needed, when the U-Boot entry point is equal to the CPU reset exception vector address. For instance this is the case when U-Boot is used as ROM in Qemu or booted from parallel NOR flash. When U-Boot is booted from RAM (e.g. loaded there by SPL), the exception vectors need to be setup dynamically, which is done in follow-up commits. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada1-1/+1
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21MIPS: ath79: Use mach_cpu_init instead of arch_cpu_initPaul Burton1-1/+1
In order to prepare for MIPS arch code making use of arch_cpu_init in a later patch, stop using it from ath79 SoC code & instead use the new mach_cpu_init which is provided for this purpose. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31mips: ath79: Use AR933X_PLL_SWITCH_CLOCK_CONTROL_REG macro defineWills Wang2-1/+2
Add AR933X_PLL_SWITCH_CLOCK_CONTROL_REG define for ar933x chip. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-31mips: ath79: Add support for ungating USB and ethernet on qca953xWills Wang1-0/+50
Add code to ungate USB and ethernet controller on qca953x Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-31mips: ath79: Rename get_bootstrap into ath79_get_bootstrapWills Wang9-28/+15
Add a platform prefix for function name in order to make more readable, and move it into ath79.h Signed-off-by: Wills Wang <wills.wang@live.com> Acked-by: Marek Vasut <marex@denx.de>
2016-05-26mips: ath79: ar933x: Avoid warning with gcc5Wills Wang1-0/+2
GCC 5.3 report a warning: 'upper' and 'lower' may be used uninitialized in this function [-Wmaybe-uninitialized]. Compiler might need explicit initializer. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-26mips: ath79: ar933x: Fix ethernet PHY mismatchWills Wang2-1/+3
We need reset the Ethernet Switch analog part before operation, or the build-in Ethernet PHY don't work. Signed-off-by: Wills Wang <wills.wang@live.com> Acked-by: Marek Vasut <marex@denx.de>
2016-05-21mips: ath79: Add support for TPLink WDR4300Marek Vasut1-0/+5
Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: Add AR934x supportMarek Vasut8-1/+571
Add support for the Atheros AR934x WiSoCs. This patchs adds complete system init, including PLL and DRAM init, both of which happen from full C environment, since the AR934x has proper SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: Add support for ungating ethernet on ar933x and ar934xMarek Vasut3-0/+80
Add code to ungate the ethernet controller on ar933x and ar934x . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: Add support for ungating USB on ar933x and ar934xMarek Vasut2-0/+61
Add code to ungate the USB controller on ar933x and ar934x . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: Fix compiler warning on const assignmentMarek Vasut1-1/+1
The assignment const T var; var = value; is illegal, since var is constant. Drop the const to fix the compiler warning. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: Fix ar71xx_regs.h indentMarek Vasut1-1034/+1069
The indent in this file triggers my OCD, so fix it. Replace multiple spaces with tabs and align the values in one column. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-21ath79: add readonly attribute for ath79_soc_descWills Wang1-4/+4
use 'const' keywork to qualify readonly attribute for lookup-table member Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21ath79: ar933x: use BIT macro for bit shift operationWills Wang1-7/+7
used a uniform BIT macro for register bit-field shift Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: add AP143 reference boardWills Wang1-0/+5
This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21mips: ath79: add AP121 reference boardWills Wang1-0/+11
This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21mips: ath79: add support for QCA953x SOCsWills Wang6-1/+787
This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: add support for AR933x SOCsWills Wang6-0/+720
This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21mips: add base support for QCA/Atheros ath79 SOCsWills Wang9-0/+1597
This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com>
generated by cgit v1.1 at 2024-11-12 00:54:25 +0000