aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-24travis: Wire Xilinx Versal Virt platformMichal Simek1-0/+7
Test Xilinx Versal Virt platform running on the v3.1.0 Qemu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Disable MMC for for zc12xx_revA boardsMichal Simek3-3/+3
All these boards have no SD enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable FPGA_LOAD_SECURE commandMichal Simek15-0/+15
Enable fpga load secure feature for xilinx platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable ISSI flash for some platformsMichal Simek16-0/+16
Enable ISSI flash for platforms. Xilinx reference boards are also used internally with different flash part to increase coverage that's why enable also ISSI parts for all these boards even if that board is released only with one part. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable SPI on several boardsMichal Simek16-0/+46
Enable GQSPI driver, SF command and SPL support for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Setup proper SPI dependencyMichal Simek7-12/+2
Select DM_SPI/DM_SPI_FLASH for the whole SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24ARM: zynqmp_r5: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek1-0/+2
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable net configs for zc1275Siva Durga Prasad Paladugu1-0/+4
This patch enable net configs for zc1275 board. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek21-33/+2
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: versal: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek2-2/+2
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24fpga: zynqmp: show an error message when FPGA programming failsLuca Ceresoli1-1/+1
When FPGA programming fails, it does so silently, unless debugging code is enabled. This makes it hard to detect problems in production environments. Print the error message unconditionally so the error doesn't go unnoticed. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix tcminit help text alignmentMichal Simek1-5/+5
Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24net: phy: Move fixed link code to separate routineSiva Durga Prasad Paladugu1-7/+27
This patch moves fixed-link functionality code to a separate routine inorder to make it more modular and cleaner. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24arm64: zynqmp: Fix mmc node names to be in sync with kernelSiva Durga Prasad Paladugu2-2/+6
This patches renames sd nodes in dts to be in line with kernel. This patch also modifies the references for the same in code. It checks mmc first to have no time penalty for new DT node names based on left-to-right expression evaluation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24zynq-gem: Use appropriate cache flush/invalidate for RX and TXStefan Theil1-5/+6
The cache was only flushed before *transmitting* packets, but not when receiving them, leading to an issue where new packets were handed to the receive handler with old contents in cache. This only happens when a lot of packets are received without sending packages every now and then. Also flushing the receive buffers in the transmit function makes no sense and can be removed. Signed-off-by: Stefan Theil <stefan.theil@mixed-mode.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Protect board_late_init functionMichal Simek1-0/+2
Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Do not protect zynqmp_pmufw_version()Michal Simek1-3/+1
There is hard dependency for CLK_ZYNQMP to have zynqmp_pmufw_version() but also FPGA code is calling this function which is possible to use without actual CLK_ZYNQMP firmware driver to be enabled. This patch enables the case where only fixed-clock CLK setup is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24mmc: zynq: Remove unused pwrseq variableMichal Simek1-1/+0
This variable was incorrectly added by: "mmc: zynq_sdhci: Add support for SD3.0" (sha1: d1f4e39d58db32a4fd1a1b4085e0ede498bd773f) which had nothing to do with MMC power sequence provider. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable 2 NAND chips for zc1751 dc2Michal Simek1-0/+1
This board contains 2 nand chips that's why enable this feature. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24mtd: nand: arasan_nfc: Add support for nand multi chip selectT Karthik Reddy2-14/+20
This patch adds support for nand multi chip select. Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number of nand chips. Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24tools: zynqmpimage: round up partition sizeMichael Tretter1-3/+12
The FSBL copies "Total Partition Word Length" * 4 bytes from the boot.bin, which implies that the partition size is 4 byte aligned. When writing the partition, mkimage calculates "Total Partition Word Length" by dividing the size by 4. This implicitly cuts unaligned bytes at the end of the added binary. Instead of rounding down, the size must be round up to 4 bytes and the binary padded accordingly. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-23Merge tag 'mips-pull-2019-01-23' of git://git.denx.de/u-boot-mipsTom Rini42-18/+3040
- MIPS: mscc: ocelot: add ethernet switch and network support - MIPS: mscc: add support for ServalT SoC family - MIPS: mscc: add support for Serval SoC family
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur6-0/+155
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add device tree for Serval pcb106 boardHoratiu Vultur1-0/+56
Add device tree based on evaluation board pcb106. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: add device tree for Serval pcb105 boardHoratiu Vultur2-0/+205
Add device tree based on evaluation board pcb105. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Serval SoC family.Horatiu Vultur11-14/+438
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Serval SoC family.Horatiu Vultur3-0/+244
The Serval SoC family has 32 pins. Currently there is no support for Serval in Linux kernel. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur7-0/+335
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Servalt SoC family.Horatiu Vultur10-11/+419
As Ocelot, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.Horatiu Vultur3-0/+279
The Servalt SoC family has 36 pins. Currently there is not support for Servalt pinctrl in Linux kernel. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23configs: mscc_ocelot: add network supportGregory CLEMENT1-0/+1
Now that network support is added for the ocelot platform, let's add it in the default configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT1-0/+24
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23net: add MSCC Ocelot switch supportGregory CLEMENT4-0/+774
This patch adds support for the Microsemi Ethernet switch present on Ocelot SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MIPS: mscc: ocelot: Add ethernet nodes for OcelotGregory CLEMENT2-0/+117
Import Ethernet related nodes from Linux Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-22Merge git://git.denx.de/u-boot-nds32Tom Rini4-5/+14
- Support nds32 prebuilt toolchain. - Fix some compile issues. - Fix dts mmc node compatible string.
2019-01-22nds32: dts: Fix mmc node compatible stringRick Chen2-2/+2
In the two commits: cf3922dddc44a968685b535f2af195f1e51f4a7b mmc: ftsdc010_mci: Sync compatible with DT mmc node c14e90e8445e7b1c3531b4bdeb778c47bd6570eb riscv: dts: Sync DT with Linux Kernel ftsdc010_mci's compatible has been modified as "andestech,atfsdc010" for RISC-V synchronization. But ae3xx.dts and ag101p.dts which are used for nds32 adp-ae3xx and adp-ag101p platforms did not be modified correctly at that time. It will cause mmc detection failure. Fix it here. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Fix boot fail issue when build with elf-mculib.Rick Chen1-1/+1
Add -mcmodel=large can let elf-mculib have the same default behavior just like linux-glibc. And it help to pass U-Boot booting sequence. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Generate SW fpu instruction.Rick Chen1-2/+2
Force it to generate SW fup instruction. It help to avoid bugs when running on no-HW-fpu board, but compile with v3f which support HW fpu instruction. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Remove gcc unused optionRick Chen1-1/+1
-G0 is an old option, not support now, So remove it. It can help to fix compile error when build with nds32 pre-build toolchain. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22.travis.yml: Support nds32 prebuilt toolchainRick Chen1-0/+9
Download nds32 prebuild toolchain from github which is base on gcc 8.0.1 version for regression. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-21Merge git://git.denx.de/u-boot-marvellTom Rini40-400/+1918
- Sync Armada-38x dts with Linux 4.20 from Chris - Misc changes and enhancements to Turris Mox (v4) from Marek - Reserve PSCI area for Armada 8k from Heinrich - New Allied Telesis x530 board (Armada-385) from Chris - Misc minor changes (defconfig etc)
2019-01-21Merge git://git.denx.de/u-boot-mpc83xxTom Rini2-0/+4
2019-01-21Revert "env: sf: fix environment in SPI NOR"Tom Rini1-1/+1
Per Heiko the original changes were correct and something is misbehaving on his hardware. This reverts commit 3d5931e5986a49c44cdab845c6751d845812e8d8. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-21ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to KconfigDerald D. Woods39-69/+80
This commit converts the following items to Kconfig: CONFIG_ATMEL_NAND_HWECC CONFIG_ATMEL_NAND_HW_PMECC CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER [PMECC References] https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap [Mailing List Thread] https://lists.denx.de/pipermail/u-boot/2018-December/350666.html Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment") [trini: Make the migration be size neutral and possibly not fix the above in all cases] Reported-by: Daniel Evans <photonthunder@gmail.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham15-1/+987
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21board: mvebu: drop unused ETH_PHY macro definitionsBaruch Siach5-20/+0
These macros are not used anywhere in the boards code. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm64: mvebu: defconfig: enable CONFIG_CMD_NVMEHeinrich Schuchardt3-0/+6
An NVME drive may be installed on the MACCHIATObin board using the PCIe slot or on the Clearfog Pro using mini a PCI-e slot. With the configuration change it becomes usable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt1-0/+11
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from U-Boot leads to an immediate crash. So let's make the same memory reservation as the vendor device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: configs: turris_mox: Add 64 MiB of boot memoryMarek Behún1-0/+2
This is needed for some scenarios, such as booting large FIT image. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: turris_mox: Support 1 GB version of Turris MoxMarek Behún2-2/+18
Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB or 1 GiB. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-11-12 12:56:05 +0000