aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGregory CLEMENT <gregory.clement@bootlin.com>2019-01-17 17:07:14 +0100
committerDaniel Schwierzeck <daniel.schwierzeck@gmail.com>2019-01-23 18:26:44 +0100
commit2f8d0677366d859bd2f23fc58280e913f15a4f61 (patch)
treec91e03e26444d6893dd46b5a08d596cb70ab03b7
parentc8546163fa92bb46c09017db18dadbb26e639895 (diff)
downloadu-boot-2f8d0677366d859bd2f23fc58280e913f15a4f61.zip
u-boot-2f8d0677366d859bd2f23fc58280e913f15a4f61.tar.gz
u-boot-2f8d0677366d859bd2f23fc58280e913f15a4f61.tar.bz2
MIPS: mscc: ocelot: add switch reset support
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-rw-r--r--board/mscc/ocelot/ocelot.c24
1 files changed, 24 insertions, 0 deletions
diff --git a/board/mscc/ocelot/ocelot.c b/board/mscc/ocelot/ocelot.c
index 0f7a532..532d06f 100644
--- a/board/mscc/ocelot/ocelot.c
+++ b/board/mscc/ocelot/ocelot.c
@@ -10,6 +10,7 @@
#include <environment.h>
#include <spi.h>
#include <led.h>
+#include <wait_bit.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -18,6 +19,29 @@ enum {
BOARD_TYPE_PCB123,
};
+void mscc_switch_reset(bool enter)
+{
+ /* Nasty workaround to avoid GPIO19 (DDR!) being reset */
+ mscc_gpio_set_alternate(19, 2);
+
+ debug("applying SwC reset\n");
+
+ writel(ICPU_RESET_CORE_RST_PROTECT, BASE_CFG + ICPU_RESET);
+ writel(PERF_SOFT_RST_SOFT_CHIP_RST, BASE_DEVCPU_GCB + PERF_SOFT_RST);
+
+ if (wait_for_bit_le32(BASE_DEVCPU_GCB + PERF_SOFT_RST,
+ PERF_SOFT_RST_SOFT_CHIP_RST, false, 5000, false))
+ pr_err("Tiemout while waiting for switch reset\n");
+
+ /*
+ * Reset GPIO19 mode back as regular GPIO, output, high (DDR
+ * not reset) (Order is important)
+ */
+ setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+ writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_SET);
+ mscc_gpio_set_alternate(19, 0);
+}
+
void board_debug_uart_init(void)
{
/* too early for the pinctrl driver, so configure the UART pins here */