Age | Commit message (Collapse) | Author | Files | Lines |
|
This converts the following to Kconfig:
CONFIG_FSL_LBC
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This converts the following to Kconfig:
CONFIG_FSL_IIM
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This converts the following to Kconfig:
CONFIG_FSL_DEVICE_DISABLE
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This converts the following to Kconfig:
CONFIG_FSL_CADMUS
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
As we have more legacy PMIC drivers to move to Kconfig, guard them all
with POWER_LEGACY or SPL_POWER_LEGACY. Do the same kind of check for
building the drivers too. This also means that we need to resort the
list slightly in the Makefile.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the SRIO namespace do not
easily transition to Kconfig. In many cases they likely should come from
the device tree instead. Move these out of CONFIG namespace and in to
CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SRIO1
CONFIG_SRIO2
CONFIG_SRIO_PCIE_BOOT_MASTER
CONFIG_SYS_SRIO
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_TIMER_COUNTS_DOWN
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
There are now no flags being set in these files, so remove them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the
current default via Kconfig rather than C code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_NOBQFMAN
CONFIG_SYS_DPAA_DCE
CONFIG_SYS_DPAA_FMAN
CONFIG_SYS_DPAA_PME
CONFIG_SYS_DPAA_RMAN
CONFIG_SYS_PMAN
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_OMAP_ABE_SYSCK
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This commit removes the following unused symbols:
CONFIG_SYS_NVRAM_BASE_ADDR
CONFIG_SYS_NVRAM_SIZE
CONFIG_SYS_PAXE_BASE
CONFIG_SYS_PCCNT
CONFIG_SYS_PCDAT
CONFIG_SYS_PCDDR
CONFIG_SYS_PCI1_ADDR
CONFIG_SYS_PCI2_ADDR
CONFIG_SYS_PCI1_IO_BUS
CONFIG_SYS_PCI1_IO_SIZE
CONFIG_SYS_PCI1_MEM_BUS
CONFIG_SYS_PCI1_MEM_SIZE
CONFIG_SYS_PCIE3_ADDR
CONFIG_SYS_PCIE4_ADDR
CONFIG_SYS_PCIE3_IO_PHYS
CONFIG_SYS_PCIE3_IO_VIRT
CONFIG_SYS_PCIE4_IO_PHYS
CONFIG_SYS_PCIE4_IO_VIRT
CONFIG_SYS_PLL_SETTLING_TIME
CONFIG_SYS_QMAN_CENA_BASE
CONFIG_SYS_QMAN_SP_CENA_SIZE
CONFIG_SYS_RCAR_I2C0_BASE
CONFIG_SYS_RCAR_I2C1_BASE
CONFIG_SYS_RCAR_I2C2_BASE
CONFIG_SYS_RCAR_I2C3_BASE
CONFIG_SYS_SATA
CONFIG_SYS_SDRAM_BASE2
CONFIG_SYS_SGMII_REFCLK_MHZ
CONFIG_SYS_SGMII_LINERATE_MHZ
CONFIG_SYS_SGMII_RATESCALE
CONFIG_SYS_SH_SDHI0_BASE
CONFIG_SYS_SH_SDHI0_BASE
CONFIG_SYS_SH_SDHI1_BASE
CONFIG_SYS_SH_SDHI2_BASE
CONFIG_SYS_SH_SDHI3_BASE
CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
CONFIG_SYS_SPI_U_BOOT_SIZE
CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR
CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN
CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT
CONFIG_SYS_VCXK_BASE
CONFIG_SYS_VCXK_DEFAULT_LINEALIGN
CONFIG_SYS_VCXK_DOUBLEBUFFERED
CONFIG_SYS_VCXK_ENABLE_DDR
CONFIG_SYS_VCXK_ENABLE_PIN
CONFIG_SYS_VCXK_ENABLE_PORT
CONFIG_SYS_VCXK_INVERT_DDR
CONFIG_SYS_VCXK_INVERT_PIN
CONFIG_SYS_VCXK_INVERT_PORT
CONFIG_SYS_VCXK_REQUEST_DDR
CONFIG_SYS_VCXK_REQUEST_PIN
CONFIG_SYS_VCXK_REQUEST_PORT
CONFIG_SYS_VSC7385_BR_PRELIM
CONFIG_SYS_VSC7385_OR_PRELIM
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
These RTC drivers are currently unused and reference other unused CONFIG
variables, so remove them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SPL_NS16550_MIN_FUNCTIONS
CONFIG_SYS_NS16550_MEM32
CONFIG_SYS_NS16550_PORT_MAPPED
CONFIG_SYS_NS16550_REG_SIZE
CONFIG_SYS_NS16550_SERIAL
To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that
platforms can enable the legacy driver here for SPL.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This symbol is specific to the PowerPC SPL implementation, so rename
this to reflect that it's in SPL and used / tested there, so that we can
then safely migrate it to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_SIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_PAGE_2K
CONFIG_SYS_NAND_PAGE_4K
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_MAX_OOBFREE
CONFIG_SYS_NAND_MAX_ECCPOS
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This is the only driver, and only one platform makes use of, setting
CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this
case.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_HW_ECC
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_HW_ECC_OOBFIRST
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This commit removes the following unused symbols:
CONFIG_SYS_NAND_DDR_LAW
CONFIG_SYS_NAND_ECCSTEPS
CONFIG_SYS_NAND_ECCTOTAL
CONFIG_SYS_NAND_ENABLE_PIN_SPL
CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
CONFIG_SYS_NAND_U_BOOT_RELOC_SP
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_NAND_DBW_8
CONFIG_SYS_NAND_DBW_16
Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16
being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of
the configs set CONFIG_SYS_NAND_DBW_8. So we introduce
CONFIG_SYS_NAND_DBW_16 as an option.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
To quote the author:
This patch set adds basic IPv6 support to U-boot.
It is based on Chris's Packham patches
(https://lists.denx.de/pipermail/u-boot/2017-January/279366.html)
Chris's patches were taken as base. There were efforts to launch it on
HiFive SiFive Unmatched board but the board didn't work well. The code was
refactored, fixed some bugs as CRC for little-endian, some parts were implemented in
our own way, something was taken from Linux. Finally we did manual tests and the
board worked well.
Testing was done on HiFive SiFive Unmatched board (RISC-V)
|
|
Allow to use IPV6 tests in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
|
|
Allow to use IPV6 tests in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
|
|
Allow to use IPV6 tests in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
|
|
Add a test that checks generated Link Local Address. Use in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add a test that checks generated Solicited Node Multicast Address from our
ipv6 address. Use in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add a test if two address are in the same subnet. Use in sandbox
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Test checksum computation. csum_ipv6_magic() uses in upper layer
protocols as TCP/UDP/ICMPv6/etc to calculate payload checksum.
Series-changes: 3
- Fixed style problems
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add a test to check convertation from char* to struct in6_addr.
Use in sandbox
Series-changes: 3
- Fixed tests to use length param in string_to_ip6()
Series-changes: 5
- Add test under #ifdef
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Implement ping6 command to ping hosts using IPv6. It works the same way as
an ordinary ping command. There is no ICMP request so it is not possible
to ping our host. This patch adds options in Kconfig and Makefile to
build ping6 command.
Series-changes: 3
- Added structures and functions descriptions
- Added to ping6_receive() return value instead of void
Series-changes: 4
- Fixed structures and functions description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6
instead. If an address in the command is an IPv6 address it will use IPv6
to boot or if there is a suffix -ipv6 in the end of the command it also
force using IPv6. All other tftpboot features and parameters are left
the same.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add
neighbor discovery mechanism into network init process. That is the
main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and
handle IPv6 packets.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives"
had only empty implementations and were exposed as API for futher
patches. This patch add implementation of these functions. Main
functions are: net_ip6_handler() - IPv6 packet handler for incoming
packets; net_send_udp_packet6() - make up and send an UDP packet;
csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460
section 8.1; ip6_addr_in_subnet() - check if an address is in our
subnet. Other functions are auxiliary.
Series-changes: 3
- Added comments
- Fixed style problems
- Fixed return codes instead of -1
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Implement actions on ip6addr, gatewayip6, serverip6 varaibles.
on_ip6addr - convert IPv6 string addr to struct ip6_addr
on_gatewayip6 - convert IPv6 string addr to struct ip6_addr
on_serverip6 - convert IPv6 string addr to struct ip6_addr
Series-changes: 3
- Removed memory allocation
- Substituted -1 for error code
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add the possibility to recognize IPv6 address in print function.
To output IPv6 address use %pI6 specifier.
Series-changes: 3
- Substituted #if (...) for if (...) to get better readability
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This functions is used as a converter from IPv6 address string notation
to struct ip6_addr that is used everywhere in IPv6 implementation. For
example it is used to parse and convert IPv6 address from tftpboot
command. Conversion algorithm uses two passes, first to verify syntax and
locate colons and second pass to read the address. In case of valid IPv6
address it returns 0.
Examples of valid strings:
2001:db8::0:1234:1
2001:0db8:0000:0000:0000:0000:1234:0001
::1
::ffff:192.168.1.1
Examples of invalid strings
2001:db8::0::0 (:: can only appear once)
2001:db8:192.168.1.1::1 (v4 part can only appear at the end)
192.168.1.1 (we don't implicity map v4)
Series-changes: 3
- Added function description
- Added length parameter to string_to_ip6()
Series-changes: 4
- Fixed function description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Implement basic of NDP. It doesn't include such things as Router
Solicitation, Router Advertisement and Redirect. It just has Neighbor
Solicitation and Neighbor Advertisement. Only these two features are used
in u-boot IPv6. Implementation of some NDP functions uses API that was
exposed in "net: ipv6: Add IPv6 basic primitives".
Also this patch inlcudes update in Makefile to build NDP.
Series-changes: 3
- Added structures and functions descriptions
- Fixed style problems
Series-changes: 4
- Fixed structures and functions description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|