aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/_exports.h9
-rw-r--r--include/asm-arm/arch-at91rm9200/AT91RM9200.h139
-rw-r--r--include/asm-arm/arch-davinci/emac_defs.h311
-rw-r--r--include/asm-arm/arch-davinci/emif_defs.h61
-rw-r--r--include/asm-arm/arch-davinci/hardware.h166
-rw-r--r--include/asm-arm/arch-davinci/i2c_defs.h94
-rw-r--r--include/asm-arm/arch-davinci/nand_defs.h161
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h21
-rw-r--r--include/asm-arm/mach-types.h69
-rw-r--r--[-rwxr-xr-x]include/asm-microblaze/asm.h0
-rw-r--r--include/asm-ppc/e300.h1
-rw-r--r--include/asm-ppc/global_data.h12
-rw-r--r--include/asm-ppc/immap_512x.h569
-rw-r--r--include/asm-ppc/immap_85xx.h58
-rw-r--r--include/asm-ppc/immap_86xx.h16
-rw-r--r--include/asm-ppc/immap_fsl_pci.h150
-rw-r--r--include/asm-ppc/immap_qe.h20
-rw-r--r--include/asm-ppc/mmu.h3
-rw-r--r--include/asm-ppc/processor.h15
-rw-r--r--include/at45.h69
-rw-r--r--include/cmd_confdefs.h187
-rw-r--r--include/command.h6
-rw-r--r--include/common.h29
-rw-r--r--include/config_cmd_all.h81
-rw-r--r--include/config_cmd_default.h40
-rw-r--r--include/configs/A3000.h27
-rw-r--r--include/configs/ADCIOP.h29
-rw-r--r--include/configs/ADNPESC1.h88
-rw-r--r--include/configs/ADS860.h18
-rw-r--r--include/configs/AMX860.h47
-rw-r--r--include/configs/AP1000.h40
-rw-r--r--include/configs/APC405.h45
-rw-r--r--include/configs/AR405.h38
-rw-r--r--include/configs/ASH405.h42
-rw-r--r--include/configs/Adder.h29
-rw-r--r--include/configs/AdderUSB.h51
-rw-r--r--include/configs/Alaska8220.h60
-rw-r--r--include/configs/AmigaOneG3SE.h56
-rw-r--r--include/configs/B2.h26
-rw-r--r--include/configs/BAB7xx.h32
-rw-r--r--include/configs/BC3450.h131
-rw-r--r--include/configs/BMW.h37
-rw-r--r--include/configs/CANBT.h29
-rw-r--r--include/configs/CATcenter.h44
-rw-r--r--include/configs/CCM.h32
-rw-r--r--include/configs/CMS700.h53
-rw-r--r--include/configs/CPC45.h51
-rw-r--r--include/configs/CPCI2DP.h35
-rw-r--r--include/configs/CPCI405.h47
-rw-r--r--include/configs/CPCI4052.h57
-rw-r--r--include/configs/CPCI405AB.h55
-rw-r--r--include/configs/CPCI405DT.h57
-rw-r--r--include/configs/CPCI440.h48
-rw-r--r--include/configs/CPCI750.h53
-rw-r--r--include/configs/CPCIISER4.h41
-rw-r--r--include/configs/CPU86.h42
-rw-r--r--include/configs/CPU87.h50
-rw-r--r--include/configs/CRAYL1.h65
-rw-r--r--include/configs/CU824.h30
-rw-r--r--include/configs/DASA_SIM.h35
-rw-r--r--include/configs/DB64360.h39
-rw-r--r--include/configs/DB64460.h39
-rw-r--r--include/configs/DK1C20.h85
-rw-r--r--include/configs/DK1S10.h82
-rw-r--r--include/configs/DP405.h38
-rw-r--r--include/configs/DU405.h38
-rw-r--r--include/configs/EB+MCF-EV123.h22
-rw-r--r--include/configs/ELPPC.h25
-rw-r--r--include/configs/ELPT860.h27
-rw-r--r--include/configs/EP1C20.h49
-rw-r--r--include/configs/EP1S10.h48
-rw-r--r--include/configs/EP1S40.h48
-rw-r--r--include/configs/EP88x.h28
-rw-r--r--include/configs/ERIC.h33
-rw-r--r--include/configs/ESTEEM192E.h17
-rw-r--r--include/configs/ETX094.h22
-rw-r--r--include/configs/EVB64260.h23
-rw-r--r--include/configs/EXBITGEN.h21
-rw-r--r--include/configs/FADS823.h33
-rw-r--r--include/configs/FADS850SAR.h21
-rw-r--r--include/configs/FLAGADM.h34
-rw-r--r--include/configs/FPS850L.h43
-rw-r--r--include/configs/FPS860L.h41
-rw-r--r--include/configs/G2000.h44
-rw-r--r--include/configs/GEN860T.h63
-rw-r--r--include/configs/GENIETV.h21
-rw-r--r--include/configs/GTH.h26
-rw-r--r--include/configs/HH405.h57
-rw-r--r--include/configs/HIDDEN_DRAGON.h31
-rw-r--r--include/configs/HMI10.h52
-rw-r--r--include/configs/HUB405.h40
-rw-r--r--include/configs/IAD210.h29
-rw-r--r--include/configs/ICU862.h39
-rw-r--r--include/configs/IDS8247.h42
-rw-r--r--include/configs/IP860.h32
-rw-r--r--include/configs/IPHASE4539.h25
-rw-r--r--include/configs/ISPAN.h36
-rw-r--r--include/configs/IVML24.h27
-rw-r--r--include/configs/IVMS8.h26
-rw-r--r--include/configs/IceCube.h69
-rw-r--r--include/configs/JSE.h46
-rw-r--r--include/configs/KAREF.h55
-rw-r--r--include/configs/KUP4K.h45
-rw-r--r--include/configs/KUP4X.h49
-rw-r--r--include/configs/LANTEC.h100
-rw-r--r--include/configs/M5271EVB.h24
-rw-r--r--include/configs/M5272C3.h26
-rw-r--r--include/configs/M5282EVB.h22
-rw-r--r--include/configs/MBX.h28
-rw-r--r--include/configs/MBX860T.h2
-rw-r--r--include/configs/METROBOX.h57
-rw-r--r--include/configs/MHPC.h35
-rw-r--r--include/configs/MIP405.h70
-rw-r--r--include/configs/ML2.h45
-rw-r--r--include/configs/MOUSSE.h25
-rw-r--r--include/configs/MPC8260ADS.h105
-rw-r--r--include/configs/MPC8266ADS.h97
-rw-r--r--include/configs/MPC8313ERDB.h38
-rw-r--r--include/configs/MPC8323ERDB.h583
-rw-r--r--include/configs/MPC832XEMDS.h60
-rw-r--r--include/configs/MPC8349EMDS.h65
-rw-r--r--include/configs/MPC8349ITX.h60
-rw-r--r--include/configs/MPC8360EMDS.h60
-rw-r--r--include/configs/MPC8540ADS.h62
-rw-r--r--include/configs/MPC8540EVAL.h45
-rw-r--r--include/configs/MPC8541CDS.h44
-rw-r--r--include/configs/MPC8544DS.h175
-rw-r--r--include/configs/MPC8548CDS.h384
-rw-r--r--include/configs/MPC8555CDS.h44
-rw-r--r--include/configs/MPC8560ADS.h102
-rw-r--r--include/configs/MPC8568MDS.h103
-rw-r--r--include/configs/MPC8641HPCN.h150
-rw-r--r--include/configs/MUSENKI.h17
-rw-r--r--include/configs/MVBLUE.h43
-rw-r--r--include/configs/MVS1.h43
-rw-r--r--include/configs/NC650.h39
-rw-r--r--include/configs/NETPHONE.h36
-rw-r--r--include/configs/NETTA.h49
-rw-r--r--include/configs/NETTA2.h37
-rw-r--r--include/configs/NETVIA.h34
-rw-r--r--include/configs/NSCU.h35
-rw-r--r--include/configs/NX823.h27
-rw-r--r--include/configs/OCRTC.h36
-rw-r--r--include/configs/ORSG.h36
-rw-r--r--include/configs/OXC.h21
-rw-r--r--include/configs/P3G4.h40
-rw-r--r--include/configs/PATI.h37
-rw-r--r--include/configs/PCI405.h38
-rw-r--r--include/configs/PCI5441.h42
-rw-r--r--include/configs/PCIPPC2.h41
-rw-r--r--include/configs/PCIPPC6.h43
-rw-r--r--include/configs/PIP405.h69
-rw-r--r--include/configs/PK1C20.h55
-rw-r--r--include/configs/PLU405.h48
-rw-r--r--include/configs/PM520.h75
-rw-r--r--include/configs/PM826.h58
-rw-r--r--include/configs/PM828.h58
-rw-r--r--include/configs/PM854.h67
-rw-r--r--include/configs/PM856.h64
-rw-r--r--include/configs/PMC405.h46
-rw-r--r--include/configs/PN62.h36
-rw-r--r--include/configs/PPChameleonEVB.h48
-rw-r--r--include/configs/QS823.h44
-rw-r--r--include/configs/QS850.h44
-rw-r--r--include/configs/QS860T.h34
-rw-r--r--include/configs/R360MPI.h44
-rw-r--r--include/configs/RBC823.h75
-rw-r--r--include/configs/RPXClassic.h25
-rw-r--r--include/configs/RPXlite.h21
-rw-r--r--include/configs/RPXlite_DW.h52
-rw-r--r--include/configs/RPXsuper.h39
-rw-r--r--include/configs/RRvision.h35
-rw-r--r--include/configs/Rattler.h43
-rw-r--r--include/configs/SBC8540.h55
-rw-r--r--include/configs/SCM.h33
-rw-r--r--include/configs/SL8245.h19
-rw-r--r--include/configs/SM850.h27
-rw-r--r--[-rwxr-xr-x]include/configs/SMN42.h31
-rw-r--r--include/configs/SPD823TS.h28
-rw-r--r--include/configs/SX1.h24
-rw-r--r--include/configs/SXNI855T.h30
-rw-r--r--include/configs/Sandpoint8240.h38
-rw-r--r--include/configs/Sandpoint8245.h33
-rw-r--r--include/configs/TASREG.h32
-rw-r--r--include/configs/TB5200.h88
-rw-r--r--include/configs/TOP5200.h77
-rw-r--r--include/configs/TOP860.h47
-rw-r--r--include/configs/TQM5200.h119
-rw-r--r--include/configs/TQM823L.h46
-rw-r--r--include/configs/TQM823M.h35
-rw-r--r--include/configs/TQM8260.h36
-rw-r--r--include/configs/TQM8272.h57
-rw-r--r--include/configs/TQM834x.h58
-rw-r--r--include/configs/TQM850L.h34
-rw-r--r--include/configs/TQM850M.h34
-rw-r--r--include/configs/TQM855L.h35
-rw-r--r--include/configs/TQM855M.h37
-rw-r--r--include/configs/TQM85xx.h47
-rw-r--r--include/configs/TQM860L.h39
-rw-r--r--include/configs/TQM860M.h37
-rw-r--r--include/configs/TQM862L.h35
-rw-r--r--include/configs/TQM862M.h35
-rw-r--r--include/configs/TQM866M.h35
-rw-r--r--include/configs/TQM885D.h46
-rw-r--r--include/configs/Total5200.h64
-rw-r--r--include/configs/VCMA9.h54
-rw-r--r--include/configs/VOH405.h48
-rw-r--r--include/configs/VOM405.h49
-rw-r--r--include/configs/VoVPN-GW.h53
-rw-r--r--include/configs/W7OLMC.h36
-rw-r--r--include/configs/W7OLMG.h40
-rw-r--r--include/configs/WUH405.h42
-rw-r--r--include/configs/XPEDITE1K.h52
-rw-r--r--include/configs/Yukon8220.h60
-rw-r--r--include/configs/ZPC1900.h51
-rw-r--r--include/configs/ZUMA.h35
-rw-r--r--include/configs/acadia.h68
-rw-r--r--include/configs/ads5121.h401
-rw-r--r--include/configs/adsvix.h26
-rw-r--r--include/configs/aev.h67
-rw-r--r--include/configs/alpr.h54
-rw-r--r--include/configs/armadillo.h17
-rw-r--r--include/configs/assabet.h22
-rw-r--r--include/configs/at91rm9200dk.h42
-rw-r--r--include/configs/atc.h38
-rw-r--r--include/configs/atstk1002.h64
-rw-r--r--include/configs/bamboo.h74
-rw-r--r--include/configs/barco.h37
-rw-r--r--include/configs/bf533-ezkit.h32
-rw-r--r--include/configs/bf533-stamp.h58
-rw-r--r--include/configs/bf537-stamp.h84
-rw-r--r--include/configs/bf561-ezkit.h38
-rw-r--r--include/configs/bubinga.h58
-rw-r--r--include/configs/c2mon.h33
-rw-r--r--include/configs/canmb.h47
-rw-r--r--include/configs/cerf250.h19
-rw-r--r--include/configs/cm4008.h21
-rw-r--r--include/configs/cm41xx.h21
-rw-r--r--include/configs/cm5200.h338
-rw-r--r--include/configs/cmc_pu2.h51
-rw-r--r--include/configs/cmi_mpc5xx.h34
-rw-r--r--include/configs/cobra5272.h27
-rw-r--r--include/configs/cogent_mpc8260.h30
-rw-r--r--include/configs/cogent_mpc8xx.h27
-rw-r--r--include/configs/cpci5200.h59
-rw-r--r--include/configs/cradle.h17
-rw-r--r--include/configs/csb226.h32
-rw-r--r--include/configs/csb272.h48
-rw-r--r--include/configs/csb472.h47
-rw-r--r--include/configs/csb637.h40
-rw-r--r--include/configs/davinci_dvevm.h214
-rw-r--r--include/configs/davinci_schmoogie.h157
-rw-r--r--include/configs/davinci_sonata.h209
-rw-r--r--include/configs/dbau1x00.h58
-rw-r--r--include/configs/debris.h48
-rw-r--r--include/configs/delta.h51
-rw-r--r--include/configs/dnp1110.h19
-rw-r--r--include/configs/eXalion.h32
-rw-r--r--include/configs/ebony.h58
-rw-r--r--include/configs/ep7312.h21
-rw-r--r--include/configs/ep8248.h49
-rw-r--r--include/configs/ep8260.h82
-rw-r--r--include/configs/ep82xxm.h62
-rw-r--r--include/configs/evb4510.h21
-rw-r--r--include/configs/gcplus.h22
-rw-r--r--include/configs/gth2.h35
-rw-r--r--include/configs/gw8260.h48
-rw-r--r--include/configs/hcu4.h348
-rw-r--r--include/configs/hcu5.h393
-rw-r--r--include/configs/hermes.h21
-rw-r--r--include/configs/hmi1001.h52
-rw-r--r--include/configs/hymod.h73
-rw-r--r--include/configs/idmr.h37
-rw-r--r--include/configs/impa7.h21
-rw-r--r--include/configs/incaip.h32
-rw-r--r--include/configs/inka4x0.h50
-rw-r--r--include/configs/innokom.h32
-rw-r--r--include/configs/integratorap.h21
-rw-r--r--include/configs/integratorcp.h27
-rw-r--r--include/configs/ixdp425.h24
-rw-r--r--include/configs/ixdpg425.h31
-rw-r--r--include/configs/jupiter.h38
-rw-r--r--include/configs/katmai.h62
-rw-r--r--include/configs/kb9202.h34
-rw-r--r--include/configs/kvme080.h50
-rw-r--r--include/configs/lart.h19
-rw-r--r--include/configs/logodl.h24
-rw-r--r--[-rwxr-xr-x]include/configs/lpc2292sodimm.h29
-rw-r--r--include/configs/lpd7a400.h25
-rw-r--r--include/configs/lpd7a404.h25
-rw-r--r--include/configs/luan.h54
-rw-r--r--include/configs/lubbock.h22
-rw-r--r--include/configs/lwmon.h55
-rw-r--r--include/configs/lwmon5.h116
-rw-r--r--include/configs/mcc200.h72
-rw-r--r--include/configs/mecp5200.h48
-rw-r--r--include/configs/ml300.h27
-rw-r--r--include/configs/ml401.h114
-rw-r--r--include/configs/modnet50.h21
-rw-r--r--include/configs/motionpro.h51
-rw-r--r--include/configs/mp2usb.h80
-rw-r--r--include/configs/mpc7448hpc2.h55
-rw-r--r--include/configs/mx1ads.h29
-rw-r--r--include/configs/mx1fs2.h38
-rw-r--r--include/configs/netstar.h57
-rw-r--r--include/configs/ns9750dev.h49
-rw-r--r--include/configs/o2dnt.h47
-rw-r--r--include/configs/ocotea.h58
-rw-r--r--include/configs/omap1510inn.h23
-rw-r--r--include/configs/omap1610h2.h23
-rw-r--r--include/configs/omap1610inn.h23
-rw-r--r--include/configs/omap2420h4.h29
-rw-r--r--include/configs/omap5912osk.h23
-rw-r--r--include/configs/omap730p2.h20
-rw-r--r--include/configs/p3mx.h54
-rw-r--r--include/configs/p3p440.h56
-rw-r--r--include/configs/pb1x00.h40
-rw-r--r--include/configs/pcs440ep.h134
-rw-r--r--include/configs/pcu_e.h32
-rw-r--r--include/configs/pdnb3.h42
-rw-r--r--include/configs/pf5200.h58
-rw-r--r--include/configs/pleb2.h21
-rw-r--r--include/configs/ppmc7xx.h291
-rw-r--r--include/configs/ppmc8260.h48
-rw-r--r--include/configs/purple.h19
-rw-r--r--include/configs/pxa255_idp.h23
-rw-r--r--include/configs/quantum.h36
-rw-r--r--include/configs/r5200.h25
-rw-r--r--include/configs/rmu.h35
-rw-r--r--include/configs/rsdproto.h30
-rw-r--r--include/configs/sacsng.h76
-rw-r--r--include/configs/sbc2410x.h47
-rw-r--r--include/configs/sbc405.h40
-rw-r--r--include/configs/sbc8240.h39
-rw-r--r--include/configs/sbc8260.h70
-rw-r--r--include/configs/sbc8349.h62
-rw-r--r--include/configs/sbc8560.h53
-rw-r--r--include/configs/sbc8641d.h604
-rw-r--r--include/configs/sc3.h60
-rw-r--r--include/configs/sc520_cdp.h31
-rw-r--r--include/configs/sc520_spunk.h26
-rw-r--r--include/configs/scb9328.h33
-rw-r--r--include/configs/sequoia.h68
-rw-r--r--include/configs/shannon.h23
-rw-r--r--include/configs/smdk2400.h38
-rw-r--r--include/configs/smdk2410.h38
-rw-r--r--include/configs/smmaco4.h65
-rw-r--r--include/configs/sorcery.h62
-rw-r--r--include/configs/spc1920.h45
-rw-r--r--include/configs/spieval.h107
-rw-r--r--include/configs/stxgp3.h60
-rw-r--r--include/configs/stxssa.h61
-rw-r--r--include/configs/stxxtc.h36
-rw-r--r--include/configs/suzaku.h17
-rw-r--r--include/configs/svm_sc8xx.h32
-rw-r--r--include/configs/taihu.h476
-rw-r--r--include/configs/taishan.h57
-rw-r--r--include/configs/tb0229.h28
-rw-r--r--include/configs/trab.h79
-rw-r--r--include/configs/uc100.h54
-rw-r--r--include/configs/uc101.h58
-rw-r--r--include/configs/utx8245.h42
-rw-r--r--include/configs/v37.h29
-rw-r--r--include/configs/v38b.h57
-rw-r--r--include/configs/versatile.h25
-rw-r--r--include/configs/virtlab2.h48
-rw-r--r--include/configs/voiceblue.h57
-rw-r--r--include/configs/walnut.h58
-rw-r--r--include/configs/wepep250.h30
-rw-r--r--include/configs/xaeniax.h32
-rw-r--r--include/configs/xm250.h28
-rw-r--r--include/configs/xsengine.h22
-rw-r--r--include/configs/xupv2p.h54
-rw-r--r--include/configs/yosemite.h74
-rw-r--r--include/configs/yucca.h56
-rw-r--r--include/configs/zeus.h382
-rw-r--r--include/configs/zylonite.h33
-rw-r--r--include/da9030.h12
-rw-r--r--include/dataflash.h43
-rw-r--r--include/div64.h (renamed from include/asm-avr32/div64.h)0
-rw-r--r--include/dm9161.h4
-rw-r--r--include/dp83848.h88
-rw-r--r--include/dtt.h8
-rw-r--r--include/exports.h11
-rw-r--r--include/fdt_support.h6
-rw-r--r--include/flash.h5
-rw-r--r--include/lcd.h4
-rw-r--r--include/led.h45
-rw-r--r--include/libfdt.h8
-rw-r--r--include/libfdt_env.h2
-rw-r--r--include/mk48t59.h2
-rw-r--r--include/mpc512x.h398
-rw-r--r--include/mpc83xx.h4
-rw-r--r--include/mpc85xx.h8
-rw-r--r--include/net.h42
-rw-r--r--include/pci.h6
-rw-r--r--include/pcmcia.h8
-rw-r--r--include/post.h1
-rw-r--r--include/ppc405.h16
-rw-r--r--include/ppc440.h13
-rw-r--r--include/ppc_asm.tmpl4
-rw-r--r--include/radeon.h1984
-rw-r--r--include/sha1.h115
-rw-r--r--include/spartan3.h24
-rw-r--r--include/status_led.h7
-rw-r--r--include/usb.h21
-rw-r--r--include/usb_cdc_acm.h43
-rw-r--r--include/usbdcore.h3
-rw-r--r--include/usbdcore_mpc8xx.h210
-rw-r--r--include/usbdcore_omap1510.h18
-rw-r--r--include/usbdescriptors.h38
411 files changed, 19021 insertions, 6468 deletions
diff --git a/include/_exports.h b/include/_exports.h
index 2b8ec3d..af43885 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -14,8 +14,13 @@ EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
+#ifdef CONFIG_HAS_UID
+EXPORT_FUNC(forceenv)
+#endif
EXPORT_FUNC(simple_strtoul)
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+EXPORT_FUNC(simple_strtol)
+EXPORT_FUNC(strcmp)
+#if defined(CONFIG_CMD_I2C)
EXPORT_FUNC(i2c_write)
EXPORT_FUNC(i2c_read)
-#endif /* CFG_CMD_I2C */
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 97d4704..0e01005 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -27,9 +27,9 @@
typedef volatile unsigned int AT91_REG; /* Hardware register definition */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */
+/*****************************************************************************/
typedef struct _AT91S_TC
{
AT91_REG TC_CCR; /* Channel Control Register */
@@ -45,24 +45,24 @@ typedef struct _AT91S_TC
AT91_REG TC_IMR; /* Interrupt Mask Register */
} AT91S_TC, *AT91PS_TC;
-#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
-#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
-#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
-#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
-#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */
-#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
-#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
-#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
-#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
-#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
-#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
-#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
-#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
-#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Usart */
-/******************************************************************************/
+#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
+#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
+#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
+#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
+#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK*/
+#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
+#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
+#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
+#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
+#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
+#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
+#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
+#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
+#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
+
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Usart */
+/*****************************************************************************/
typedef struct _AT91S_USART
{
AT91_REG US_CR; /* Control Register */
@@ -94,9 +94,9 @@ typedef struct _AT91S_USART
AT91_REG US_PTSR; /* PDC Transfer Status Register */
} AT91S_USART, *AT91PS_USART;
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Clock Generator Controler */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Clock Generator Controler */
+/*****************************************************************************/
typedef struct _AT91S_CKGR
{
AT91_REG CKGR_MOR; /* Main Oscillator Register */
@@ -141,9 +141,9 @@ typedef struct _AT91S_CKGR
#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) /* (CKGR) Divider for USB Ports */
#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) /* (CKGR) PLL Use */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */
+/*****************************************************************************/
typedef struct _AT91S_PIO
{
AT91_REG PIO_PER; /* PIO Enable Register */
@@ -184,9 +184,9 @@ typedef struct _AT91S_PIO
} AT91S_PIO, *AT91PS_PIO;
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Debug Unit */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Debug Unit */
+/*****************************************************************************/
typedef struct _AT91S_DBGU
{
AT91_REG DBGU_CR; /* Control Register */
@@ -242,9 +242,9 @@ typedef struct _AT91S_DBGU
#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */
#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */
+/*****************************************************************************/
typedef struct _AT91S_SMC2
{
AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
@@ -267,9 +267,9 @@ typedef struct _AT91S_SMC2
#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) /* (SMC2) Read and Write Signal Setup Time */
#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) /* (SMC2) Read and Write Signal Hold Time */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Power Management Controler */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Power Management Controler */
+/*****************************************************************************/
typedef struct _AT91S_PMC
{
AT91_REG PMC_SCER; /* System Clock Enable Register */
@@ -341,9 +341,9 @@ typedef struct _AT91S_PMC
/*-------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------*/
/*-------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------*/
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Ethernet MAC */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Ethernet MAC */
+/*****************************************************************************/
typedef struct _AT91S_EMAC
{
AT91_REG EMAC_CTL; /* Network Control Register */
@@ -424,11 +424,11 @@ typedef struct _AT91S_EMAC
#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) /* (EMAC) */
#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) /* (EMAC) */
-/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- */
+/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register ------- */
#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) /* (EMAC) */
#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) /* (EMAC) */
-/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- */
+/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register ------- */
#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) /* (EMAC) */
#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) /* (EMAC) */
#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) /* (EMAC) */
@@ -442,7 +442,7 @@ typedef struct _AT91S_EMAC
#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */
-/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- */
+/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register ------- */
#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) /* (EMAC) */
#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) /* (EMAC) */
#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) /* (EMAC) */
@@ -456,8 +456,8 @@ typedef struct _AT91S_EMAC
#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) /* (EMAC) */
#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) /* (EMAC) */
-/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- */
-/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- */
+/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register ------- */
+/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register ------ */
/* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */
/* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */
#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) /* (EMAC) */
@@ -471,9 +471,9 @@ typedef struct _AT91S_EMAC
#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) /* (EMAC) */
#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) /* (EMAC) */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */
+/*****************************************************************************/
typedef struct _AT91S_SPI
{
AT91_REG SPI_CR; /* Control Register */
@@ -536,7 +536,7 @@ typedef struct _AT91S_SPI
#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) /* (SPI) Enable Status */
/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
-/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
+/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register ------- */
/* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */
/* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */
#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) /* (SPI) Clock Polarity */
@@ -555,9 +555,9 @@ typedef struct _AT91S_SPI
#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */
#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */
-/******************************************************************************/
+/*****************************************************************************/
+/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */
+/*****************************************************************************/
typedef struct _AT91S_PDC
{
AT91_REG PDC_RPR; /* Receive Pointer Register */
@@ -692,11 +692,15 @@ typedef struct _AT91S_PDC
#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */
#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */
+#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) /* Pin Controlled by PB3 */
+#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB3 */
+#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PB3 */
#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) /* Pin Controlled by PB3 */
#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) /* Pin Controlled by PB4 */
#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */
#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
+#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
@@ -737,19 +741,36 @@ typedef struct _AT91S_PDC
#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) /* (PIOC) Clear Output Data Register */
#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) /* (PIOC) Pin Data Status Register */
-#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */
-#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
+#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) /* (AIC) Base Address */
+#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */
+#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */
+#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */
+#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */
+#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) /* (PIOC) Base Address */
#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */
+#if 0
+#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) /* (PMC) Base Address */
+#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) /* (PMC) Base Address */
+#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) /* (PMC) Base Address */
+#endif
+
#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */
-#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */
+#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA4000) /* (TC0) Base Address */
+#if 0
+#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) /* (TC0) Base Address */
+#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) /* (TC0) Base Address */
+#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) /* (TC0) Base Address */
+#endif
+#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
+#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */
+#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
+#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) /* (US1) Base Address */
+#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) /* (US1) Base Address */
+#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */
+
#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) /* (CKGR) Base Address */
-#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */
-#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */
-#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */
#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */
#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */
-#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */
-#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */
#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */
#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */
diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h
new file mode 100644
index 0000000..0e10116
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emac_defs.h
@@ -0,0 +1,311 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _DM644X_EMAC_H_
+#define _DM644X_EMAC_H_
+
+#include <asm/arch/hardware.h>
+
+#define EMAC_BASE_ADDR (0x01c80000)
+#define EMAC_WRAPPER_BASE_ADDR (0x01c81000)
+#define EMAC_WRAPPER_RAM_ADDR (0x01c82000)
+#define EMAC_MDIO_BASE_ADDR (0x01c84000)
+
+/* MDIO module input frequency */
+#define EMAC_MDIO_BUS_FREQ 99000000 /* PLL/6 - 99 MHz */
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */
+
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE 60
+#define EMAC_MAX_ETHERNET_PKT_SIZE 1518
+#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS 10
+
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX 1
+#define EMAC_CH_RX 0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE 0x0
+#define EMAC_TX_DESC_BASE 0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE 0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG 1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS 36
+
+
+/* EMAC Descriptor */
+typedef volatile struct _emac_desc
+{
+ u_int32_t next; /* Pointer to next descriptor in chain */
+ u_int8_t *buffer; /* Pointer to data buffer */
+ u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */
+ u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */
+} emac_desc;
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT (0x80000000)
+#define EMAC_CPPI_EOP_BIT (0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000)
+#define EMAC_CPPI_EOQ_BIT (0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT (0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN (0x2000)
+
+
+#define MDIO_CONTROL_IDLE (0x80000000)
+#define MDIO_CONTROL_ENABLE (0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE (0x40000)
+#define MDIO_CONTROL_FAULT (0x80000)
+#define MDIO_USERACCESS0_GO (0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ (0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000)
+#define MDIO_USERACCESS0_ACK (0x20000000)
+
+/* Ethernet MAC Registers Structure */
+typedef struct {
+ dv_reg TXIDVER;
+ dv_reg TXCONTROL;
+ dv_reg TXTEARDOWN;
+ u_int8_t RSVD0[4];
+ dv_reg RXIDVER;
+ dv_reg RXCONTROL;
+ dv_reg RXTEARDOWN;
+ u_int8_t RSVD1[100];
+ dv_reg TXINTSTATRAW;
+ dv_reg TXINTSTATMASKED;
+ dv_reg TXINTMASKSET;
+ dv_reg TXINTMASKCLEAR;
+ dv_reg MACINVECTOR;
+ u_int8_t RSVD2[12];
+ dv_reg RXINTSTATRAW;
+ dv_reg RXINTSTATMASKED;
+ dv_reg RXINTMASKSET;
+ dv_reg RXINTMASKCLEAR;
+ dv_reg MACINTSTATRAW;
+ dv_reg MACINTSTATMASKED;
+ dv_reg MACINTMASKSET;
+ dv_reg MACINTMASKCLEAR;
+ u_int8_t RSVD3[64];
+ dv_reg RXMBPENABLE;
+ dv_reg RXUNICASTSET;
+ dv_reg RXUNICASTCLEAR;
+ dv_reg RXMAXLEN;
+ dv_reg RXBUFFEROFFSET;
+ dv_reg RXFILTERLOWTHRESH;
+ u_int8_t RSVD4[8];
+ dv_reg RX0FLOWTHRESH;
+ dv_reg RX1FLOWTHRESH;
+ dv_reg RX2FLOWTHRESH;
+ dv_reg RX3FLOWTHRESH;
+ dv_reg RX4FLOWTHRESH;
+ dv_reg RX5FLOWTHRESH;
+ dv_reg RX6FLOWTHRESH;
+ dv_reg RX7FLOWTHRESH;
+ dv_reg RX0FREEBUFFER;
+ dv_reg RX1FREEBUFFER;
+ dv_reg RX2FREEBUFFER;
+ dv_reg RX3FREEBUFFER;
+ dv_reg RX4FREEBUFFER;
+ dv_reg RX5FREEBUFFER;
+ dv_reg RX6FREEBUFFER;
+ dv_reg RX7FREEBUFFER;
+ dv_reg MACCONTROL;
+ dv_reg MACSTATUS;
+ dv_reg EMCONTROL;
+ dv_reg FIFOCONTROL;
+ dv_reg MACCONFIG;
+ dv_reg SOFTRESET;
+ u_int8_t RSVD5[88];
+ dv_reg MACSRCADDRLO;
+ dv_reg MACSRCADDRHI;
+ dv_reg MACHASH1;
+ dv_reg MACHASH2;
+ dv_reg BOFFTEST;
+ dv_reg TPACETEST;
+ dv_reg RXPAUSE;
+ dv_reg TXPAUSE;
+ u_int8_t RSVD6[16];
+ dv_reg RXGOODFRAMES;
+ dv_reg RXBCASTFRAMES;
+ dv_reg RXMCASTFRAMES;
+ dv_reg RXPAUSEFRAMES;
+ dv_reg RXCRCERRORS;
+ dv_reg RXALIGNCODEERRORS;
+ dv_reg RXOVERSIZED;
+ dv_reg RXJABBER;
+ dv_reg RXUNDERSIZED;
+ dv_reg RXFRAGMENTS;
+ dv_reg RXFILTERED;
+ dv_reg RXQOSFILTERED;
+ dv_reg RXOCTETS;
+ dv_reg TXGOODFRAMES;
+ dv_reg TXBCASTFRAMES;
+ dv_reg TXMCASTFRAMES;
+ dv_reg TXPAUSEFRAMES;
+ dv_reg TXDEFERRED;
+ dv_reg TXCOLLISION;
+ dv_reg TXSINGLECOLL;
+ dv_reg TXMULTICOLL;
+ dv_reg TXEXCESSIVECOLL;
+ dv_reg TXLATECOLL;
+ dv_reg TXUNDERRUN;
+ dv_reg TXCARRIERSENSE;
+ dv_reg TXOCTETS;
+ dv_reg FRAME64;
+ dv_reg FRAME65T127;
+ dv_reg FRAME128T255;
+ dv_reg FRAME256T511;
+ dv_reg FRAME512T1023;
+ dv_reg FRAME1024TUP;
+ dv_reg NETOCTETS;
+ dv_reg RXSOFOVERRUNS;
+ dv_reg RXMOFOVERRUNS;
+ dv_reg RXDMAOVERRUNS;
+ u_int8_t RSVD7[624];
+ dv_reg MACADDRLO;
+ dv_reg MACADDRHI;
+ dv_reg MACINDEX;
+ u_int8_t RSVD8[244];
+ dv_reg TX0HDP;
+ dv_reg TX1HDP;
+ dv_reg TX2HDP;
+ dv_reg TX3HDP;
+ dv_reg TX4HDP;
+ dv_reg TX5HDP;
+ dv_reg TX6HDP;
+ dv_reg TX7HDP;
+ dv_reg RX0HDP;
+ dv_reg RX1HDP;
+ dv_reg RX2HDP;
+ dv_reg RX3HDP;
+ dv_reg RX4HDP;
+ dv_reg RX5HDP;
+ dv_reg RX6HDP;
+ dv_reg RX7HDP;
+ dv_reg TX0CP;
+ dv_reg TX1CP;
+ dv_reg TX2CP;
+ dv_reg TX3CP;
+ dv_reg TX4CP;
+ dv_reg TX5CP;
+ dv_reg TX6CP;
+ dv_reg TX7CP;
+ dv_reg RX0CP;
+ dv_reg RX1CP;
+ dv_reg RX2CP;
+ dv_reg RX3CP;
+ dv_reg RX4CP;
+ dv_reg RX5CP;
+ dv_reg RX6CP;
+ dv_reg RX7CP;
+} emac_regs;
+
+/* EMAC Wrapper Registers Structure */
+typedef struct {
+ u_int8_t RSVD0[4100];
+ dv_reg EWCTL;
+ dv_reg EWINTTCNT;
+} ewrap_regs;
+
+
+/* EMAC MDIO Registers Structure */
+typedef struct {
+ dv_reg VERSION;
+ dv_reg CONTROL;
+ dv_reg ALIVE;
+ dv_reg LINK;
+ dv_reg LINKINTRAW;
+ dv_reg LINKINTMASKED;
+ u_int8_t RSVD0[8];
+ dv_reg USERINTRAW;
+ dv_reg USERINTMASKED;
+ dv_reg USERINTMASKSET;
+ dv_reg USERINTMASKCLEAR;
+ u_int8_t RSVD1[80];
+ dv_reg USERACCESS0;
+ dv_reg USERPHYSEL0;
+ dv_reg USERACCESS1;
+ dv_reg USERPHYSEL1;
+} mdio_regs;
+
+int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
+int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
+
+typedef struct
+{
+ char name[64];
+ int (*init)(int phy_addr);
+ int (*is_phy_connected)(int phy_addr);
+ int (*get_link_speed)(int phy_addr);
+ int (*auto_negotiate)(int phy_addr);
+} phy_t;
+
+#define PHY_LXT972 (0x001378e2)
+int lxt972_is_phy_connected(int phy_addr);
+int lxt972_get_link_speed(int phy_addr);
+int lxt972_init_phy(int phy_addr);
+int lxt972_auto_negotiate(int phy_addr);
+
+#define PHY_DP83848 (0x20005c90)
+int dp83848_is_phy_connected(int phy_addr);
+int dp83848_get_link_speed(int phy_addr);
+int dp83848_init_phy(int phy_addr);
+int dp83848_auto_negotiate(int phy_addr);
+
+#endif /* _DM644X_EMAC_H_ */
diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h
new file mode 100644
index 0000000..646fc77
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emif_defs.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _EMIF_DEFS_H_
+#define _EMIF_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+typedef struct {
+ dv_reg ERCSR;
+ dv_reg AWCCR;
+ dv_reg SDBCR;
+ dv_reg SDRCR;
+ dv_reg AB1CR;
+ dv_reg AB2CR;
+ dv_reg AB3CR;
+ dv_reg AB4CR;
+ dv_reg SDTIMR;
+ dv_reg DDRSR;
+ dv_reg DDRPHYCR;
+ dv_reg DDRPHYSR;
+ dv_reg TOTAR;
+ dv_reg TOTACTR;
+ dv_reg DDRPHYID_REV;
+ dv_reg SDSRETR;
+ dv_reg EIRR;
+ dv_reg EIMR;
+ dv_reg EIMSR;
+ dv_reg EIMCR;
+ dv_reg IOCTRLR;
+ dv_reg IOSTATR;
+ u_int8_t RSVD0[8];
+ dv_reg NANDFCR;
+ dv_reg NANDFSR;
+ u_int8_t RSVD1[8];
+ dv_reg NANDF1ECC;
+ dv_reg NANDF2ECC;
+ dv_reg NANDF3ECC;
+ dv_reg NANDF4ECC;
+} emif_registers;
+
+typedef emif_registers *emifregs;
+#endif
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
new file mode 100644
index 0000000..ebcdcfe
--- /dev/null
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ * linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <config.h>
+#include <asm/sizes.h>
+
+#define REG(addr) (*(volatile unsigned int *)(addr))
+#define REG_P(addr) ((volatile unsigned int *)(addr))
+
+typedef volatile unsigned int dv_reg;
+typedef volatile unsigned int * dv_reg_p;
+
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE (0x01c00000)
+#define DAVINCI_DMA_3PTC0_BASE (0x01c10000)
+#define DAVINCI_DMA_3PTC1_BASE (0x01c10400)
+#define DAVINCI_UART0_BASE (0x01c20000)
+#define DAVINCI_UART1_BASE (0x01c20400)
+#define DAVINCI_UART2_BASE (0x01c20800)
+#define DAVINCI_I2C_BASE (0x01c21000)
+#define DAVINCI_TIMER0_BASE (0x01c21400)
+#define DAVINCI_TIMER1_BASE (0x01c21800)
+#define DAVINCI_WDOG_BASE (0x01c21c00)
+#define DAVINCI_PWM0_BASE (0x01c22000)
+#define DAVINCI_PWM1_BASE (0x01c22400)
+#define DAVINCI_PWM2_BASE (0x01c22800)
+#define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000)
+#define DAVINCI_PLL_CNTRL0_BASE (0x01c40800)
+#define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000)
+#define DAVINCI_SYSTEM_DFT_BASE (0x01c42000)
+#define DAVINCI_ARM_INTC_BASE (0x01c48000)
+#define DAVINCI_IEEE1394_BASE (0x01c60000)
+#define DAVINCI_USB_OTG_BASE (0x01c64000)
+#define DAVINCI_CFC_ATA_BASE (0x01c66000)
+#define DAVINCI_SPI_BASE (0x01c66800)
+#define DAVINCI_GPIO_BASE (0x01c67000)
+#define DAVINCI_UHPI_BASE (0x01c67800)
+#define DAVINCI_VPSS_REGS_BASE (0x01c70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01c80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01c81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01c82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01c84000)
+#define DAVINCI_IMCOP_BASE (0x01cc0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01e00000)
+#define DAVINCI_VLYNQ_BASE (0x01e01000)
+#define DAVINCI_MCBSP_BASE (0x01e02000)
+#define DAVINCI_MMC_SD_BASE (0x01e10000)
+#define DAVINCI_MS_BASE (0x01e20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE (0x0c000000)
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN 0
+#define DAVINCI_GPSC_DSPDOMAIN 1
+
+#define DAVINCI_LPSC_VPSSMSTR 0
+#define DAVINCI_LPSC_VPSSSLV 1
+#define DAVINCI_LPSC_TPCC 2
+#define DAVINCI_LPSC_TPTC0 3
+#define DAVINCI_LPSC_TPTC1 4
+#define DAVINCI_LPSC_EMAC 5
+#define DAVINCI_LPSC_EMAC_WRAPPER 6
+#define DAVINCI_LPSC_MDIO 7
+#define DAVINCI_LPSC_IEEE1394 8
+#define DAVINCI_LPSC_USB 9
+#define DAVINCI_LPSC_ATA 10
+#define DAVINCI_LPSC_VLYNQ 11
+#define DAVINCI_LPSC_UHPI 12
+#define DAVINCI_LPSC_DDR_EMIF 13
+#define DAVINCI_LPSC_AEMIF 14
+#define DAVINCI_LPSC_MMC_SD 15
+#define DAVINCI_LPSC_MEMSTICK 16
+#define DAVINCI_LPSC_McBSP 17
+#define DAVINCI_LPSC_I2C 18
+#define DAVINCI_LPSC_UART0 19
+#define DAVINCI_LPSC_UART1 20
+#define DAVINCI_LPSC_UART2 21
+#define DAVINCI_LPSC_SPI 22
+#define DAVINCI_LPSC_PWM0 23
+#define DAVINCI_LPSC_PWM1 24
+#define DAVINCI_LPSC_PWM2 25
+#define DAVINCI_LPSC_GPIO 26
+#define DAVINCI_LPSC_TIMER0 27
+#define DAVINCI_LPSC_TIMER1 28
+#define DAVINCI_LPSC_TIMER2 29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
+#define DAVINCI_LPSC_ARM 31
+#define DAVINCI_LPSC_SCR2 32
+#define DAVINCI_LPSC_SCR3 33
+#define DAVINCI_LPSC_SCR4 34
+#define DAVINCI_LPSC_CROSSBAR 35
+#define DAVINCI_LPSC_CFG27 36
+#define DAVINCI_LPSC_CFG3 37
+#define DAVINCI_LPSC_CFG5 38
+#define DAVINCI_LPSC_GEM 39
+#define DAVINCI_LPSC_IMCOP 40
+
+/* Some PSC defines */
+#define PSC_CHP_SHRTSW (0x01c40038)
+#define PSC_GBLCTL (0x01c41010)
+#define PSC_EPCPR (0x01c41070)
+#define PSC_EPCCR (0x01c41078)
+#define PSC_PTCMD (0x01c41120)
+#define PSC_PTSTAT (0x01c41128)
+#define PSC_PDSTAT (0x01c41200)
+#define PSC_PDSTAT1 (0x01c41204)
+#define PSC_PDCTL (0x01c41300)
+#define PSC_PDCTL1 (0x01c41304)
+
+#define PSC_MDCTL_BASE (0x01c41a00)
+#define PSC_MDSTAT_BASE (0x01c41800)
+
+#define VDD3P3V_PWDN (0x01c40048)
+#define UART0_PWREMU_MGMT (0x01c20030)
+
+#define PSC_SILVER_BULLET (0x01c41a20)
+
+/* Some PLL defines */
+#define PLL1_PLLM (0x01c40910)
+#define PLL2_PLLM (0x01c40d10)
+#define PLL2_DIV2 (0x01c40d1c)
+
+/* Miscellania... */
+#define VBPR (0x20000020)
+#define PINMUX0 (0x01c40000)
+#define PINMUX1 (0x01c40004)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h
new file mode 100644
index 0000000..2e902e1
--- /dev/null
+++ b/include/asm-arm/arch-davinci/i2c_defs.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DAVINCI_I2C_H_
+#define _DAVINCI_I2C_H_
+
+#define I2C_WRITE 0
+#define I2C_READ 1
+
+#define I2C_BASE 0x01c21000
+
+#define I2C_OA (I2C_BASE + 0x00)
+#define I2C_IE (I2C_BASE + 0x04)
+#define I2C_STAT (I2C_BASE + 0x08)
+#define I2C_SCLL (I2C_BASE + 0x0c)
+#define I2C_SCLH (I2C_BASE + 0x10)
+#define I2C_CNT (I2C_BASE + 0x14)
+#define I2C_DRR (I2C_BASE + 0x18)
+#define I2C_SA (I2C_BASE + 0x1c)
+#define I2C_DXR (I2C_BASE + 0x20)
+#define I2C_CON (I2C_BASE + 0x24)
+#define I2C_IV (I2C_BASE + 0x28)
+#define I2C_PSC (I2C_BASE + 0x30)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */
+#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_BB (1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS (1 << 9) /* Address as slave */
+#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */
+#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
+#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
+#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
+#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK 7
+#define I2C_INTCODE_NONE 0
+#define I2C_INTCODE_AL 1 /* Arbitration lost */
+#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY 3 /* Register access ready */
+#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
+#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
+#define I2C_INTCODE_SCD 6 /* Stop condition detect */
+
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN (1 << 5) /* I2C module enable */
+#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */
+#define I2C_CON_MST (1 << 10) /* Master/slave mode */
+#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA (1 << 8) /* Expand address */
+#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */
+#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */
+
+#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */
+
+#endif
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h
new file mode 100644
index 0000000..619bd47
--- /dev/null
+++ b/include/asm-arm/arch-davinci/nand_defs.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelesly stolen from Linux Kernel source tree.
+ *
+ * ------------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _NAND_DEFS_H_
+#define _NAND_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+#define MASK_CLE 0x10
+#define MASK_ALE 0x0a
+
+#define NAND_CE0CLE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x10))
+#define NAND_CE0ALE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x0a))
+#define NAND_CE0DATA ((volatile u_int8_t *)CFG_NAND_BASE)
+
+typedef struct {
+ u_int32_t NRCSR;
+ u_int32_t AWCCR;
+ u_int8_t RSVD0[8];
+ u_int32_t AB1CR;
+ u_int32_t AB2CR;
+ u_int32_t AB3CR;
+ u_int32_t AB4CR;
+ u_int8_t RSVD1[32];
+ u_int32_t NIRR;
+ u_int32_t NIMR;
+ u_int32_t NIMSR;
+ u_int32_t NIMCR;
+ u_int8_t RSVD2[16];
+ u_int32_t NANDFCR;
+ u_int32_t NANDFSR;
+ u_int8_t RSVD3[8];
+ u_int32_t NANDF1ECC;
+ u_int32_t NANDF2ECC;
+ u_int32_t NANDF3ECC;
+ u_int32_t NANDF4ECC;
+ u_int8_t RSVD4[4];
+ u_int32_t IODFTECR;
+ u_int32_t IODFTGCR;
+ u_int8_t RSVD5[4];
+ u_int32_t IODFTMRLR;
+ u_int32_t IODFTMRMR;
+ u_int32_t IODFTMRMSBR;
+ u_int8_t RSVD6[20];
+ u_int32_t MODRNR;
+ u_int8_t RSVD7[76];
+ u_int32_t CE0DATA;
+ u_int32_t CE0ALE;
+ u_int32_t CE0CLE;
+ u_int8_t RSVD8[4];
+ u_int32_t CE1DATA;
+ u_int32_t CE1ALE;
+ u_int32_t CE1CLE;
+ u_int8_t RSVD9[4];
+ u_int32_t CE2DATA;
+ u_int32_t CE2ALE;
+ u_int32_t CE2CLE;
+ u_int8_t RSVD10[4];
+ u_int32_t CE3DATA;
+ u_int32_t CE3ALE;
+ u_int32_t CE3CLE;
+} nand_registers;
+
+typedef volatile nand_registers *nandregs;
+
+#define NAND_READ_START 0x00
+#define NAND_READ_END 0x30
+#define NAND_STATUS 0x70
+
+#ifdef CFG_NAND_HW_ECC
+#define NAND_Ecc_P1e (1 << 0)
+#define NAND_Ecc_P2e (1 << 1)
+#define NAND_Ecc_P4e (1 << 2)
+#define NAND_Ecc_P8e (1 << 3)
+#define NAND_Ecc_P16e (1 << 4)
+#define NAND_Ecc_P32e (1 << 5)
+#define NAND_Ecc_P64e (1 << 6)
+#define NAND_Ecc_P128e (1 << 7)
+#define NAND_Ecc_P256e (1 << 8)
+#define NAND_Ecc_P512e (1 << 9)
+#define NAND_Ecc_P1024e (1 << 10)
+#define NAND_Ecc_P2048e (1 << 11)
+
+#define NAND_Ecc_P1o (1 << 16)
+#define NAND_Ecc_P2o (1 << 17)
+#define NAND_Ecc_P4o (1 << 18)
+#define NAND_Ecc_P8o (1 << 19)
+#define NAND_Ecc_P16o (1 << 20)
+#define NAND_Ecc_P32o (1 << 21)
+#define NAND_Ecc_P64o (1 << 22)
+#define NAND_Ecc_P128o (1 << 23)
+#define NAND_Ecc_P256o (1 << 24)
+#define NAND_Ecc_P512o (1 << 25)
+#define NAND_Ecc_P1024o (1 << 26)
+#define NAND_Ecc_P2048o (1 << 27)
+
+#define TF(v) (v ? 1 : 0)
+
+#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0)
+#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1)
+#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2)
+#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3)
+#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4)
+#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5)
+#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6)
+#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7)
+
+#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4)
+#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5)
+#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6)
+#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7)
+
+#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0)
+#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1)
+#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2)
+#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3)
+#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4)
+#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5)
+#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6)
+#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7)
+
+#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4)
+#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5)
+#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6)
+#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7)
+
+#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
+#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ebda719..e8cb299 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -592,9 +592,11 @@ typedef void (*ExcpHndlr) (void) ;
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
/*
* USB Device Controller
*/
+#ifndef CONFIG_CPU_MONAHANS
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
@@ -749,11 +751,28 @@ typedef void (*ExcpHndlr) (void) ;
#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+#endif /* ! CONFIG_CPU_MONAHANS */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/*
+ * USB Client Controller (incomplete)
+ */
+#define UDCCR __REG(0x40600000)
+#define UDCICR0 __REG(0x40600004)
+#define UDCCIR0 __REG(0x40600008)
+#define UDCISR0 __REG(0x4060000c)
+#define UDCSIR1 __REG(0x40600010)
+#define UDCFNR __REG(0x40600014)
+#define UDCOTGICR __REG(0x40600018)
+#define UDCOTGISR __REG(0x4060001c)
+#define UP2OCR __REG(0x40600020)
+#define UP3OCR __REG(0x40600024)
-#if defined(CONFIG_PXA27X)
/*
* USB Host Controller
*/
+#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */
#define UHCREV __REG(0x4C000000)
#define UHCHCON __REG(0x4C000004)
#define UHCCOMS __REG(0x4C000008)
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index 7d7888e..f6a5b4f 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -736,7 +736,11 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_LN2410SBC 725
#define MACH_TYPE_CB3RUFC 726
#define MACH_TYPE_MP2USB 727
+#define MACH_TYPE_AT91SAM9261EK 848
#define MACH_TYPE_PDNB3 1002
+#define MACH_TYPE_AT91SAM9260EK 1099
+#define MACH_TYPE_AT91RM9200DF 1119
+#define MACH_TYPE_AT91SAM9263EK 1202
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
@@ -9402,6 +9406,71 @@ extern unsigned int __machine_arch_type;
# define machine_is_mp2usb() (0)
#endif
+#ifdef CONFIG_MACH_AT91SAM9261EK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AT91SAM9261EK
+# endif
+# define machine_is_at91sam9261ek() \
+ (machine_arch_type == MACH_TYPE_AT91SAM9261EK)
+#else
+# define machine_is_at91sam9261ek() (0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9260EK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AT91SAM9260EK
+# endif
+# define machine_is_at91sam9260ek() \
+ (machine_arch_type == MACH_TYPE_AT91SAM9260EK)
+#else
+# define machine_is_at91sam9260ek() (0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9263EK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AT91SAM9263EK
+# endif
+# define machine_is_at91sam9263ek() \
+ (machine_arch_type == MACH_TYPE_AT91SAM9263EK)
+#else
+# define machine_is_at91sam9263ek() (0)
+#endif
+
+#ifdef CONFIG_MACH_AT91RM9200DF
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AT91RM9200DF
+# endif
+# define machine_is_at91rm9200df() \
+ (machine_arch_type == MACH_TYPE_AT91RM9200DF)
+#else
+# define machine_is_at91rm9200df() (0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9263EK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AT91SAM9263EK
+# endif
+# define machine_is_at91sam9263ek() \
+ (machine_arch_type == MACH_TYPE_AT91SAM9263EK)
+#else
+# define machine_is_at91sam9263ek() (0)
+#endif
+
/*
* These have not yet been registered
*/
diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h
index f10f89c..f10f89c 100755..100644
--- a/include/asm-microblaze/asm.h
+++ b/include/asm-microblaze/asm.h
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index d1bb159..de82399 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -9,6 +9,7 @@
#define PVR_E300C1 0x80830000
#define PVR_E300C2 0x80840000
#define PVR_E300C3 0x80850000
+#define PVR_E300C4 0x80860000
/*
* Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index cd24636..1f1583a 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -71,20 +71,24 @@ typedef struct global_data {
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_MPC8360)
+ u32 ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
+#endif
#if defined(CONFIG_QE)
u32 qe_clk;
u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
-#if defined (CONFIG_MPC8360)
- u32 ddr_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
#endif
+#if defined(CONFIG_MPC512X)
+ u32 ipb_clk;
+ u32 csb_clk;
+#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC8220)
unsigned long bExtUart;
unsigned long inp_clk;
diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h
new file mode 100644
index 0000000..23d10d4
--- /dev/null
+++ b/include/asm-ppc/immap_512x.h
@@ -0,0 +1,569 @@
+/*
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * MPC512x Internal Memory Map
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on the MPC83xx header.
+ */
+
+#ifndef __IMMAP_512x__
+#define __IMMAP_512x__
+
+#include <asm/types.h>
+
+typedef struct law512x {
+ u32 bar; /* Base Addr Register */
+ u32 ar; /* Attributes Register */
+} law521x_t;
+
+/*
+ * System configuration registers
+ */
+typedef struct sysconf512x {
+ u32 immrbar; /* Internal memory map base address register */
+ u8 res0[0x1c];
+ u32 lpbaw; /* LP Boot Access Window */
+ u32 lpcs0aw; /* LP CS0 Access Window */
+ u32 lpcs1aw; /* LP CS1 Access Window */
+ u32 lpcs2aw; /* LP CS2 Access Window */
+ u32 lpcs3aw; /* LP CS3 Access Window */
+ u32 lpcs4aw; /* LP CS4 Access Window */
+ u32 lpcs5aw; /* LP CS5 Access Window */
+ u32 lpcs6aw; /* LP CS6 Access Window */
+ u32 lpcs7aw; /* LP CS7 Access Window */
+ u8 res1[0x1c];
+ law521x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */
+ u8 res2[0x28];
+ law521x_t ddrlaw; /* DDR Local Access Window */
+ u8 res3[0x18];
+ u32 mbxbar; /* MBX Base Address */
+ u32 srambar; /* SRAM Base Address */
+ u32 nfcbar; /* NFC Base Address */
+ u8 res4[0x34];
+ u32 spridr; /* System Part and Revision ID Register */
+ u32 spcr; /* System Priority Configuration Register */
+ u8 res5[0xf8];
+} sysconf512x_t;
+
+/*
+ * Watch Dog Timer (WDT) Registers
+ */
+typedef struct wdt512x {
+ u8 res0[4];
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
+ u8 res1[2];
+ u16 swsrr; /* System watchdog service register */
+ u8 res2[0xF0];
+} wdt512x_t;
+
+/*
+ * RTC Module Registers
+ */
+typedef struct rtclk512x {
+ u8 fixme[0x100];
+} rtclk512x_t;
+
+/*
+ * General Purpose Timer
+ */
+typedef struct gpt512x {
+ u8 fixme[0x100];
+} gpt512x_t;
+
+/*
+ * Integrated Programmable Interrupt Controller
+ */
+typedef struct ipic512x {
+ u8 fixme[0x100];
+} ipic512x_t;
+
+/*
+ * System Arbiter Registers
+ */
+typedef struct arbiter512x {
+ u32 acr; /* Arbiter Configuration Register */
+ u32 atr; /* Arbiter Timers Register */
+ u32 ater; /* Arbiter Transfer Error Register */
+ u32 aer; /* Arbiter Event Register */
+ u32 aidr; /* Arbiter Interrupt Definition Register */
+ u32 amr; /* Arbiter Mask Register */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register */
+ u8 res1[0xDC];
+} arbiter512x_t;
+
+/*
+ * Reset Module
+ */
+typedef struct reset512x {
+ u32 rcwl; /* Reset Configuration Word Low Register */
+ u32 rcwh; /* Reset Configuration Word High Register */
+ u8 res0[8];
+ u32 rsr; /* Reset Status Register */
+ u32 rmr; /* Reset Mode Register */
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+ u32 rcer; /* Reset Control Enable Register */
+ u8 res1[0xDC];
+} reset512x_t;
+
+/*
+ * Clock Module
+ */
+typedef struct clk512x {
+ u32 spmr; /* System PLL Mode Register */
+ u32 sccr[2]; /* System Clock Control Registers */
+ u32 scfr[2]; /* System Clock Frequency Registers */
+ u8 res0[4];
+ u32 bcr; /* Bread Crumb Register */
+ u32 pscccr[12]; /* PSC0-11 Clock Control Registers */
+ u32 spccr; /* SPDIF Clock Control Registers */
+ u32 cccr; /* CFM Clock Control Registers */
+ u32 dccr; /* DIU Clock Control Registers */
+ u8 res1[0xa8];
+} clk512x_t;
+
+/*
+ * Power Management Control Module
+ */
+typedef struct pmc512x {
+ u8 fixme[0x100];
+} pmc512x_t;
+
+/*
+ * General purpose I/O module
+ */
+typedef struct gpio512x {
+ u8 fixme[0x100];
+} gpio512x_t;
+
+/*
+ * DDR Memory Controller Memory Map
+ */
+typedef struct ddr512x {
+ u32 ddr_sys_config; /* System Configuration Register */
+ u32 ddr_time_config0; /* Timing Configuration Register */
+ u32 ddr_time_config1; /* Timing Configuration Register */
+ u32 ddr_time_config2; /* Timing Configuration Register */
+ u32 ddr_command; /* Command Register */
+ u32 ddr_compact_command; /* Compact Command Register */
+ u32 self_refresh_cmd_0; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_1; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_2; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_3; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_4; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_5; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_6; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_7; /* Enter/Exit Self Refresh Registers */
+ u32 DQS_config_offset_count; /* DQS Config Offset Count */
+ u32 DQS_config_offset_time; /* DQS Config Offset Time */
+ u32 DQS_delay_status; /* DQS Delay Status */
+ u32 res0[0xF];
+ u32 prioman_config1; /* Priority Manager Configuration */
+ u32 prioman_config2; /* Priority Manager Configuration */
+ u32 hiprio_config; /* High Priority Configuration */
+ u32 lut_table0_main_upper; /* LUT0 Main Upper */
+ u32 lut_table1_main_upper; /* LUT1 Main Upper */
+ u32 lut_table2_main_upper; /* LUT2 Main Upper */
+ u32 lut_table3_main_upper; /* LUT3 Main Upper */
+ u32 lut_table4_main_upper; /* LUT4 Main Upper */
+ u32 lut_table0_main_lower; /* LUT0 Main Lower */
+ u32 lut_table1_main_lower; /* LUT1 Main Lower */
+ u32 lut_table2_main_lower; /* LUT2 Main Lower */
+ u32 lut_table3_main_lower; /* LUT3 Main Lower */
+ u32 lut_table4_main_lower; /* LUT4 Main Lower */
+ u32 lut_table0_alternate_upper; /* LUT0 Alternate Upper */
+ u32 lut_table1_alternate_upper; /* LUT1 Alternate Upper */
+ u32 lut_table2_alternate_upper; /* LUT2 Alternate Upper */
+ u32 lut_table3_alternate_upper; /* LUT3 Alternate Upper */
+ u32 lut_table4_alternate_upper; /* LUT4 Alternate Upper */
+ u32 lut_table0_alternate_lower; /* LUT0 Alternate Lower */
+ u32 lut_table1_alternate_lower; /* LUT1 Alternate Lower */
+ u32 lut_table2_alternate_lower; /* LUT2 Alternate Lower */
+ u32 lut_table3_alternate_lower; /* LUT3 Alternate Lower */
+ u32 lut_table4_alternate_lower; /* LUT4 Alternate Lower */
+ u32 performance_monitor_config;
+ u32 event_time_counter;
+ u32 event_time_preset;
+ u32 performance_monitor1_address_low;
+ u32 performance_monitor2_address_low;
+ u32 performance_monitor1_address_hi;
+ u32 performance_monitor2_address_hi;
+ u32 res1[2];
+ u32 performance_monitor1_read_counter;
+ u32 performance_monitor2_read_counter;
+ u32 performance_monitor1_write_counter;
+ u32 performance_monitor2_write_counter;
+ u32 granted_ack_counter0;
+ u32 granted_ack_counter1;
+ u32 granted_ack_counter2;
+ u32 granted_ack_counter3;
+ u32 granted_ack_counter4;
+ u32 cumulative_wait_counter0;
+ u32 cumulative_wait_counter1;
+ u32 cumulative_wait_counter2;
+ u32 cumulative_wait_counter3;
+ u32 cumulative_wait_counter4;
+ u32 summed_priority_counter0;
+ u32 summed_priority_counter1;
+ u32 summed_priority_counter2;
+ u32 summed_priority_counter3;
+ u32 summed_priority_counter4;
+ u32 res2[0x3AD];
+} ddr512x_t;
+
+
+/*
+ * DMA/Messaging Unit
+ */
+typedef struct dma512x {
+ u8 fixme[0x1800];
+} dma512x_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct pciconf512x {
+ u8 fixme[0x80];
+} pciconf512x_t;
+
+/*
+ * Sequencer
+ */
+typedef struct ios512x {
+ u8 fixme[0x100];
+} ios512x_t;
+
+/*
+ * PCI Controller
+ */
+typedef struct pcictrl512x {
+ u8 fixme[0x100];
+} pcictrl512x_t;
+
+
+/*
+ * MSCAN
+ */
+typedef struct mscan512x {
+ u8 fixme[0x100];
+} mscan512x_t;
+
+/*
+ * BDLC
+ */
+typedef struct bdlc512x {
+ u8 fixme[0x100];
+} bdlc512x_t;
+
+/*
+ * SDHC
+ */
+typedef struct sdhc512x {
+ u8 fixme[0x100];
+} sdhc512x_t;
+
+/*
+ * SPDIF
+ */
+typedef struct spdif512x {
+ u8 fixme[0x100];
+} spdif512x_t;
+
+/*
+ * I2C
+ */
+typedef struct i2c512x_dev {
+ volatile u32 madr; /* I2Cn + 0x00 */
+ volatile u32 mfdr; /* I2Cn + 0x04 */
+ volatile u32 mcr; /* I2Cn + 0x08 */
+ volatile u32 msr; /* I2Cn + 0x0C */
+ volatile u32 mdr; /* I2Cn + 0x10 */
+ u8 res0[0x0C];
+} i2c512x_dev_t;
+
+typedef struct i2c512x {
+ i2c512x_dev_t dev[3];
+ volatile u32 icr;
+ volatile u32 mifr;
+ u8 res0[0x98];
+} i2c512x_t;
+
+/*
+ * AXE
+ */
+typedef struct axe512x {
+ u8 fixme[0x100];
+} axe512x_t;
+
+/*
+ * DIU
+ */
+typedef struct diu512x {
+ u8 fixme[0x100];
+} diu512x_t;
+
+/*
+ * CFM
+ */
+typedef struct cfm512x {
+ u8 fixme[0x100];
+} cfm512x_t;
+
+/*
+ * FEC
+ */
+typedef struct fec512x {
+ u8 fixme[0x800];
+} fec512x_t;
+
+/*
+ * ULPI
+ */
+typedef struct ulpi512x {
+ u8 fixme[0x600];
+} ulpi512x_t;
+
+/*
+ * UTMI
+ */
+typedef struct utmi512x {
+ u8 fixme[0x3000];
+} utmi512x_t;
+
+/*
+ * PCI DMA
+ */
+typedef struct pcidma512x {
+ u8 fixme[0x300];
+} pcidma512x_t;
+
+/*
+ * IO Control
+ */
+typedef struct ioctrl512x {
+ u32 regs[0x400];
+} ioctrl512x_t;
+
+/*
+ * IIM
+ */
+typedef struct iim512x {
+ u8 fixme[0x1000];
+} iim512x_t;
+
+/*
+ * LPC
+ */
+typedef struct lpc512x {
+ u32 cs_cfg[8]; /* Chip Select N Configuration Registers
+ No dedicated entry for CS Boot as == CS0 */
+ u32 cs_cr; /* Chip Select Control Register */
+ u32 cs_sr; /* Chip Select Status Register */
+ u32 cs_bcr; /* Chip Select Burst Control Register */
+ u32 cs_dccr; /* Chip Select Deadcycle Control Register */
+ u32 cs_hccr; /* Chip Select Holdcycle Control Register */
+ u8 res0[0xcc];
+ u32 sclpc_psr; /* SCLPC Packet Size Register */
+ u32 sclpc_sar; /* SCLPC Start Address Register */
+ u32 sclpc_cr; /* SCLPC Control Register */
+ u32 sclpc_er; /* SCLPC Enable Register */
+ u32 sclpc_nar; /* SCLPC NextAddress Register */
+ u32 sclpc_sr; /* SCLPC Status Register */
+ u32 sclpc_bdr; /* SCLPC Bytes Done Register */
+ u32 emb_scr; /* EMB Share Counter Register */
+ u32 emb_pcr; /* EMB Pause Control Register */
+ u8 res1[0x1c];
+ u32 lpc_fdwr; /* LPC RX/TX FIFO Data Word Register */
+ u32 lpc_fsr; /* LPC RX/TX FIFO Status Register */
+ u32 lpc_cr; /* LPC RX/TX FIFO Control Register */
+ u32 lpc_ar; /* LPC RX/TX FIFO Alarm Register */
+ u8 res2[0xb0];
+} lpc512x_t;
+
+/*
+ * PATA
+ */
+typedef struct pata512x {
+ u8 fixme[0x100];
+} pata512x_t;
+
+/*
+ * PSC
+ */
+typedef struct psc512x {
+ volatile u8 mode; /* PSC + 0x00 */
+ volatile u8 res0[3];
+ union { /* PSC + 0x04 */
+ volatile u16 status;
+ volatile u16 clock_select;
+ } sr_csr;
+#define psc_status sr_csr.status
+#define psc_clock_select sr_csr.clock_select
+ volatile u16 res1;
+ volatile u8 command; /* PSC + 0x08 */
+ volatile u8 res2[3];
+ union { /* PSC + 0x0c */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } buffer;
+#define psc_buffer_8 buffer.buffer_8
+#define psc_buffer_16 buffer.buffer_16
+#define psc_buffer_32 buffer.buffer_32
+ union { /* PSC + 0x10 */
+ volatile u8 ipcr;
+ volatile u8 acr;
+ } ipcr_acr;
+#define psc_ipcr ipcr_acr.ipcr
+#define psc_acr ipcr_acr.acr
+ volatile u8 res3[3];
+ union { /* PSC + 0x14 */
+ volatile u16 isr;
+ volatile u16 imr;
+ } isr_imr;
+#define psc_isr isr_imr.isr
+#define psc_imr isr_imr.imr
+ volatile u16 res4;
+ volatile u8 ctur; /* PSC + 0x18 */
+ volatile u8 res5[3];
+ volatile u8 ctlr; /* PSC + 0x1c */
+ volatile u8 res6[3];
+ volatile u32 ccr; /* PSC + 0x20 */
+ volatile u8 res7[12];
+ volatile u8 ivr; /* PSC + 0x30 */
+ volatile u8 res8[3];
+ volatile u8 ip; /* PSC + 0x34 */
+ volatile u8 res9[3];
+ volatile u8 op1; /* PSC + 0x38 */
+ volatile u8 res10[3];
+ volatile u8 op0; /* PSC + 0x3c */
+ volatile u8 res11[3];
+ volatile u32 sicr; /* PSC + 0x40 */
+ volatile u8 res12[60];
+ volatile u32 tfcmd; /* PSC + 0x80 */
+ volatile u32 tfalarm; /* PSC + 0x84 */
+ volatile u32 tfstat; /* PSC + 0x88 */
+ volatile u32 tfintstat; /* PSC + 0x8C */
+ volatile u32 tfintmask; /* PSC + 0x90 */
+ volatile u32 tfcount; /* PSC + 0x94 */
+ volatile u16 tfwptr; /* PSC + 0x98 */
+ volatile u16 tfrptr; /* PSC + 0x9A */
+ volatile u32 tfsize; /* PSC + 0x9C */
+ volatile u8 res13[28];
+ union { /* PSC + 0xBC */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } tfdata_buffer;
+#define tfdata_8 tfdata_buffer.buffer_8
+#define tfdata_16 tfdata_buffer.buffer_16
+#define tfdata_32 tfdata_buffer.buffer_32
+
+ volatile u32 rfcmd; /* PSC + 0xC0 */
+ volatile u32 rfalarm; /* PSC + 0xC4 */
+ volatile u32 rfstat; /* PSC + 0xC8 */
+ volatile u32 rfintstat; /* PSC + 0xCC */
+ volatile u32 rfintmask; /* PSC + 0xD0 */
+ volatile u32 rfcount; /* PSC + 0xD4 */
+ volatile u16 rfwptr; /* PSC + 0xD8 */
+ volatile u16 rfrptr; /* PSC + 0xDA */
+ volatile u32 rfsize; /* PSC + 0xDC */
+ volatile u8 res18[28];
+ union { /* PSC + 0xFC */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } rfdata_buffer;
+#define rfdata_8 rfdata_buffer.buffer_8
+#define rfdata_16 rfdata_buffer.buffer_16
+#define rfdata_32 rfdata_buffer.buffer_32
+} psc512x_t;
+
+/*
+ * FIFOC
+ */
+typedef struct fifoc512x {
+ u32 fifoc_cmd;
+ u32 fifoc_int;
+ u32 fifoc_dma;
+ u32 fifoc_axe;
+ u32 fifoc_debug;
+ u8 fixme[0xEC];
+} fifoc512x_t;
+
+/*
+ * SATA
+ */
+typedef struct sata512x {
+ u8 fixme[0x2000];
+} sata512x_t;
+
+typedef struct immap {
+ sysconf512x_t sysconf; /* System configuration */
+ u8 res0[0x700];
+ wdt512x_t wdt; /* Watch Dog Timer (WDT) */
+ rtclk512x_t rtc; /* Real Time Clock Module */
+ gpt512x_t gpt; /* General Purpose Timer */
+ ipic512x_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter512x_t arbiter; /* CSB Arbiter */
+ reset512x_t reset; /* Reset Module */
+ clk512x_t clk; /* Clock Module */
+ pmc512x_t pmc; /* Power Management Control Module */
+ gpio512x_t gpio; /* General purpose I/O module */
+ u8 res1[0x100];
+ mscan512x_t mscan; /* MSCAN */
+ bdlc512x_t bdlc; /* BDLC */
+ sdhc512x_t sdhc; /* SDHC */
+ spdif512x_t spdif; /* SPDIF */
+ i2c512x_t i2c; /* I2C Controllers */
+ u8 res2[0x800];
+ axe512x_t axe; /* AXE */
+ diu512x_t diu; /* Display Interface Unit */
+ cfm512x_t cfm; /* Clock Frequency Measurement */
+ u8 res3[0x500];
+ fec512x_t fec; /* Fast Ethernet Controller */
+ ulpi512x_t ulpi; /* USB ULPI */
+ u8 res4[0xa00];
+ utmi512x_t utmi; /* USB UTMI */
+ u8 res5[0x1000];
+ pcidma512x_t pci_dma; /* PCI DMA */
+ pciconf512x_t pci_conf; /* PCI Configuration */
+ u8 res6[0x80];
+ ios512x_t ios; /* PCI Sequencer */
+ pcictrl512x_t pci_ctrl; /* PCI Controller Control and Status */
+ u8 res7[0xa00];
+ ddr512x_t mddrc; /* Multi-port DDR Memory Controller */
+ ioctrl512x_t io_ctrl; /* IO Control */
+ iim512x_t iim; /* IC Identification module */
+ u8 res8[0x4000];
+ lpc512x_t lpc; /* LocalPlus Controller */
+ pata512x_t pata; /* Parallel ATA */
+ u8 res9[0xd00];
+ psc512x_t psc[12]; /* PSCs */
+ u8 res10[0x300];
+ fifoc512x_t fifoc; /* FIFO Controller */
+ u8 res11[0x2000];
+ dma512x_t dma; /* DMA */
+ u8 res12[0xa800];
+ sata512x_t sata; /* Serial ATA */
+ u8 res13[0xde000];
+} immap_t;
+#endif /* __IMMAP_512x__ */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 5377c2e..3d4816f 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1,6 +1,8 @@
/*
* MPC85xx Internal Memory Map
*
+ * Copyright 2007 Freescale Semiconductor.
+ *
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
@@ -1520,14 +1522,39 @@ typedef struct ccsr_rio {
char res58[60176];
} ccsr_rio_t;
+/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */
+typedef struct par_io {
+ uint cpodr; /* 0x100 */
+ uint cpdat; /* 0x104 */
+ uint cpdir1; /* 0x108 */
+ uint cpdir2; /* 0x10c */
+ uint cppar1; /* 0x110 */
+ uint cppar2; /* 0x114 */
+ char res[8];
+}par_io_t;
+
/*
* Global Utilities Register Block(0xe_0000-0xf_ffff)
*/
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00380000
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
@@ -1541,6 +1568,25 @@ typedef struct ccsr_gur {
uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
char res6[12];
uint devdisr; /* 0xe0070 - Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
char res7[12];
uint powmgtcsr; /* 0xe0080 - Power management status and control register */
char res8[12];
@@ -1548,7 +1594,15 @@ typedef struct ccsr_gur {
char res9[12];
uint pvr; /* 0xe00a0 - Processor version register */
uint svr; /* 0xe00a4 - System version register */
- char res10[3416];
+ char res10a[8];
+ uint rstcr; /* 0xe00b0 - Reset control register */
+#ifdef MPC8568
+ char res10b[76];
+ par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */
+ char res10c[3136];
+#else
+ char res10b[3404];
+#endif
uint clkocr; /* 0xe0e00 - Clock out select register */
char res11[12];
uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
@@ -1560,7 +1614,7 @@ typedef struct ccsr_gur {
uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
uint res14; /* 0xe0f28 */
uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
- char res15[61651];
+ char res15[61648]; /* 0xe0f30 to 0xefffff */
} ccsr_gur_t;
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
index 0e3fc34..169725b 100644
--- a/include/asm-ppc/immap_86xx.h
+++ b/include/asm-ppc/immap_86xx.h
@@ -1257,9 +1257,12 @@ typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
#define MPC86xx_PORBMSR_HA 0x00060000
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
-#define MPC86xx_PORDEVSR_IO_SEL 0x000F0000
+#define MPC86xx_PORDEVSR_IO_SEL 0x000F0000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00380000 /* 85xx platform type */
+#define MPC86xx_PORDEVSR_CORE1TE 0x00000080 /* ASMP (Core1 addr trans) */
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
@@ -1273,8 +1276,11 @@ typedef struct ccsr_gur {
uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
char res6[12];
uint devdisr; /* 0xe0070 - Device disable control */
-#define MPC86xx_DEVDISR_PCIEX1 0x80000000
-#define MPC86xx_DEVDISR_PCIEX2 0x40000000
+#define MPC86xx_DEVDISR_PCIEX1 0x80000000
+#define MPC86xx_DEVDISR_PCIEX2 0x40000000
+#define MPC86xx_DEVDISR_PCI1 0x80000000
+#define MPC86xx_DEVDISR_PCIE1 0x40000000
+#define MPC86xx_DEVDISR_PCIE2 0x20000000
char res7[12];
uint powmgtcsr; /* 0xe0080 - Power management status and control register */
char res8[12];
@@ -1282,7 +1288,9 @@ typedef struct ccsr_gur {
char res9[12];
uint pvr; /* 0xe00a0 - Processor version register */
uint svr; /* 0xe00a4 - System version register */
- char res10[3416];
+ char res10a[1880];
+ uint clkdvdr; /* 0xe0800 - Clock Divide register */
+ char res10b[1532];
uint clkocr; /* 0xe0e00 - Clock out select register */
char res11[12];
uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h
new file mode 100644
index 0000000..bd732b6
--- /dev/null
+++ b/include/asm-ppc/immap_fsl_pci.h
@@ -0,0 +1,150 @@
+/* (C) Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMMAP_85xx_fsl_pci__
+#define __IMMAP_85xx_fsl_pci__
+
+/*
+ * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
+ */
+
+/*
+ * PCI Translation Registers
+ */
+typedef struct pci_outbound_window {
+ u32 potar; /* 0x00 - Address */
+ u32 potear; /* 0x04 - Address Extended */
+ u32 powbar; /* 0x08 - Window Base Address */
+ u32 res1;
+ u32 powar; /* 0x10 - Window Attributes */
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+ u32 res2[3];
+} pot_t;
+
+typedef struct pci_inbound_window {
+ u32 pitar; /* 0x00 - Address */
+ u32 res1;
+ u32 piwbar; /* 0x08 - Window Base Address */
+ u32 piwbear; /* 0x0c - Window Base Address Extended */
+ u32 piwar; /* 0x10 - Window Attributes */
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+ u32 res2[3];
+} pit_t;
+
+/* PCI/PCI Express Registers */
+typedef struct ccsr_pci {
+ u32 cfg_addr; /* 0x000 - PCI Configuration Address Register */
+ u32 cfg_data; /* 0x004 - PCI Configuration Data Register */
+ u32 int_ack; /* 0x008 - PCI Interrupt Acknowledge Register */
+ u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */
+ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */
+ u32 config; /* 0x014 - PCIE CONFIG Register */
+ char res2[8];
+ u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */
+ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
+ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
+ u32 pm_command; /* 0x02c - PCIE PM Command register */
+ char res4[3016]; /* (- #xbf8 #x30)3016 */
+ u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
+ u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
+
+ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
+ u32 res5[64];
+ pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
+#define PIT3 0
+#define PIT2 1
+#define PIT1 2
+
+#if 0
+ u32 potar0; /* 0xc00 - PCI Outbound Transaction Address Register 0 */
+ u32 potear0; /* 0xc04 - PCI Outbound Translation Extended Address Register 0 */
+ char res5[8];
+ u32 powar0; /* 0xc10 - PCI Outbound Window Attributes Register 0 */
+ char res6[12];
+ u32 potar1; /* 0xc20 - PCI Outbound Transaction Address Register 1 */
+ u32 potear1; /* 0xc24 - PCI Outbound Translation Extended Address Register 1 */
+ u32 powbar1; /* 0xc28 - PCI Outbound Window Base Address Register 1 */
+ char res7[4];
+ u32 powar1; /* 0xc30 - PCI Outbound Window Attributes Register 1 */
+ char res8[12];
+ u32 potar2; /* 0xc40 - PCI Outbound Transaction Address Register 2 */
+ u32 potear2; /* 0xc44 - PCI Outbound Translation Extended Address Register 2 */
+ u32 powbar2; /* 0xc48 - PCI Outbound Window Base Address Register 2 */
+ char res9[4];
+ u32 powar2; /* 0xc50 - PCI Outbound Window Attributes Register 2 */
+ char res10[12];
+ u32 potar3; /* 0xc60 - PCI Outbound Transaction Address Register 3 */
+ u32 potear3; /* 0xc64 - PCI Outbound Translation Extended Address Register 3 */
+ u32 powbar3; /* 0xc68 - PCI Outbound Window Base Address Register 3 */
+ char res11[4];
+ u32 powar3; /* 0xc70 - PCI Outbound Window Attributes Register 3 */
+ char res12[12];
+ u32 potar4; /* 0xc80 - PCI Outbound Transaction Address Register 4 */
+ u32 potear4; /* 0xc84 - PCI Outbound Translation Extended Address Register 4 */
+ u32 powbar4; /* 0xc88 - PCI Outbound Window Base Address Register 4 */
+ char res13[4];
+ u32 powar4; /* 0xc90 - PCI Outbound Window Attributes Register 4 */
+ char res14[268];
+ u32 pitar3; /* 0xda0 - PCI Inbound Translation Address Register 3 */
+ char res15[4];
+ u32 piwbar3; /* 0xda8 - PCI Inbound Window Base Address Register 3 */
+ u32 piwbear3; /* 0xdac - PCI Inbound Window Base Extended Address Register 3 */
+ u32 piwar3; /* 0xdb0 - PCI Inbound Window Attributes Register 3 */
+ char res16[12];
+ u32 pitar2; /* 0xdc0 - PCI Inbound Translation Address Register 2 */
+ char res17[4];
+ u32 piwbar2; /* 0xdc8 - PCI Inbound Window Base Address Register 2 */
+ u32 piwbear2; /* 0xdcc - PCI Inbound Window Base Extended Address Register 2 */
+ u32 piwar2; /* 0xdd0 - PCI Inbound Window Attributes Register 2 */
+ char res18[12];
+ u32 pitar1; /* 0xde0 - PCI Inbound Translation Address Register 1 */
+ char res19[4];
+ u32 piwbar1; /* 0xde8 - PCI Inbound Window Base Address Register 1 */
+ char res20[4];
+ u32 piwar1; /* 0xdf0 - PCI Inbound Window Attributes Register 1 */
+ char res21[12];
+#endif
+ u32 pedr; /* 0xe00 - PCI Error Detect Register */
+ u32 pecdr; /* 0xe04 - PCI Error Capture Disable Register */
+ u32 peer; /* 0xe08 - PCI Error Interrupt Enable Register */
+ u32 peattrcr; /* 0xe0c - PCI Error Attributes Capture Register */
+ u32 peaddrcr; /* 0xe10 - PCI Error Address Capture Register */
+/* u32 perr_disr * 0xe10 - PCIE Erorr Disable Register */
+ u32 peextaddrcr; /* 0xe14 - PCI Error Extended Address Capture Register */
+ u32 pedlcr; /* 0xe18 - PCI Error Data Low Capture Register */
+ u32 pedhcr; /* 0xe1c - PCI Error Error Data High Capture Register */
+ u32 gas_timr; /* 0xe20 - PCI Gasket Timer Register */
+/* u32 perr_cap_stat; * 0xe20 - PCIE Error Capture Status Register */
+ char res22[4];
+ u32 perr_cap0; /* 0xe28 - PCIE Error Capture Register 0 */
+ u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
+ u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
+ u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
+ char res23[456]; /* (- #x1000 #xe38) 456 */
+} ccsr_fsl_pci_t;
+
+#endif /*__IMMAP_fsl_pci__*/
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index 950b949..a16a6d3 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -281,6 +281,17 @@ typedef struct ucc_slow {
u8 res4[0x200 - 0x091];
} __attribute__ ((packed)) ucc_slow_t;
+typedef struct ucc_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifctl; /* interface control reg */
+ u32 ifstat; /* interface statux reg */
+} __attribute__ ((packed))uec_mii_t;
+
typedef struct ucc_ethernet {
u32 maccfg1; /* mac configuration reg. 1 */
u32 maccfg2; /* mac configuration reg. 2 */
@@ -540,14 +551,21 @@ typedef struct qe_immap {
u8 res14[0x300];
u8 res15[0x3A00];
u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+#if defined(CONFIG_MPC8568)
+ u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */
+ u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */
+#else
u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+#endif
} __attribute__ ((packed)) qe_map_t;
extern qe_map_t *qe_immr;
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8568)
+#define QE_MURAM_SIZE 0x10000UL
+#elif defined(CONFIG_MPC8360)
#define QE_MURAM_SIZE 0xc000UL
#elif defined(CONFIG_MPC832X)
#define QE_MURAM_SIZE 0x4000UL
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 48fd982..b3cfa9b 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -645,6 +645,9 @@ void mttlb3(unsigned long index, unsigned long value);
unsigned long mftlb1(unsigned long index);
unsigned long mftlb2(unsigned long index);
unsigned long mftlb3(unsigned long index);
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void remove_tlb(u32 vaddr, u32 size);
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_440 */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 9780fe1..0a160e2 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -58,7 +58,6 @@
#else
#define MSR_KERNEL MSR_ME
#endif
-#define MSR_USER MSR_KERNEL|MSR_PR|MSR_EE
/* Floating Point Status and Control Register (FPSCR) Fields */
@@ -218,12 +217,14 @@
#define HID0_DPM (1<<20)
#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
+#define HID0_TBEN (1<<14) /* Time Base Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
#define HID0_DCI HID0_DCFI
#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_ENMAS7 (1<<7) /* Enable MAS7 Update for 36-bit phys */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
@@ -451,6 +452,7 @@
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SPRN_PID2 0x27a /* Process ID Register 2 */
#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
+#define SPRN_MCAR 0x23d /* Machine Check Address register */
#ifdef CONFIG_440
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
@@ -465,7 +467,8 @@
#define ESR_ST 0x00800000 /* Store Operation */
#if defined(CONFIG_MPC86xx)
-#define SPRN_MSSCRO 0x3f6
+#define SPRN_MSSCR0 0x3f6
+#define SPRN_MSSSR0 0x3f7
#endif
@@ -532,7 +535,7 @@
#define LR SPRN_LR
#define MBAR SPRN_MBAR /* System memory base address */
#if defined(CONFIG_MPC86xx)
-#define MSSCR0 SPRN_MSSCRO
+#define MSSCR0 SPRN_MSSCR0
#endif
#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define PIR SPRN_PIR
@@ -628,6 +631,12 @@
#define MAS6 SPRN_MAS6
#define MAS7 SPRN_MAS7
+#if defined(CONFIG_4xx) || defined(CONFIG_44x) || defined(CONFIG_MPC85xx)
+#define DAR_DEAR DEAR
+#else
+#define DAR_DEAR DAR
+#endif
+
/* Device Control Registers */
#define DCRN_BEAR 0x090 /* Bus Error Address Register */
diff --git a/include/at45.h b/include/at45.h
new file mode 100644
index 0000000..40bb4a0
--- /dev/null
+++ b/include/at45.h
@@ -0,0 +1,69 @@
+
+#ifndef _AT45_H_
+#define _AT45_H_
+#ifdef DATAFLASH_MMC_SELECT
+extern void AT91F_SelectMMC(void);
+extern void AT91F_SelectSPI(void);
+extern int AT91F_GetMuxStatus(void);
+#endif
+extern void AT91F_SpiInit(void);
+extern void AT91F_SpiEnable(int cs);
+extern unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc );
+extern AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char OpCode,
+ unsigned int CmdSize,
+ unsigned int DataflashAddress);
+extern AT91S_DataFlashStatus AT91F_DataFlashGetStatus (
+ AT91PS_DataflashDesc pDesc);
+extern AT91S_DataFlashStatus AT91F_DataFlashWaitReady (
+ AT91PS_DataflashDesc pDataFlashDesc,
+ unsigned int timeout);
+extern AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
+ AT91PS_DataFlash pDataFlash,
+ int src,
+ unsigned char *dataBuffer,
+ int sizeToRead );
+extern AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int SizeToWrite);
+extern AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned int page);
+extern AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned char *dataBuffer,
+ unsigned int bufferAddress,
+ int SizeToWrite );
+extern AT91S_DataFlashStatus AT91F_PageErase(
+ AT91PS_DataFlash pDataFlash,
+ unsigned int page);
+extern AT91S_DataFlashStatus AT91F_BlockErase(
+ AT91PS_DataFlash pDataFlash,
+ unsigned int block);
+extern AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned int dest );
+extern AT91S_DataFlashStatus AT91F_PartialPageWrite (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int size);
+extern AT91S_DataFlashStatus AT91F_DataFlashWrite(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ int dest,
+ int size );
+extern int AT91F_DataFlashRead(
+ AT91PS_DataFlash pDataFlash,
+ unsigned long addr,
+ unsigned long size,
+ char *buffer);
+extern int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc);
+
+#endif
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
deleted file mode 100644
index b3ccdce..0000000
--- a/include/cmd_confdefs.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Definitions for Configuring the monitor commands
- */
-#ifndef _CMD_CONFIG_H
-#define _CMD_CONFIG_H
-
-/*
- * Configurable monitor commands
- */
-#define CFG_CMD_BDI 0x00000001ULL /* bdinfo */
-#define CFG_CMD_LOADS 0x00000002ULL /* loads */
-#define CFG_CMD_LOADB 0x00000004ULL /* loadb */
-#define CFG_CMD_IMI 0x00000008ULL /* iminfo */
-#define CFG_CMD_CACHE 0x00000010ULL /* icache, dcache */
-#define CFG_CMD_FLASH 0x00000020ULL /* flinfo, erase, protect */
-#define CFG_CMD_MEMORY 0x00000040ULL /* md, mm, nm, mw, cp, cmp, */
- /* crc, base, loop, mtest */
-#define CFG_CMD_NET 0x00000080ULL /* bootp, tftpboot, rarpboot */
-#define CFG_CMD_ENV 0x00000100ULL /* saveenv */
-#define CFG_CMD_KGDB 0x0000000000000200ULL /* kgdb */
-#define CFG_CMD_PCMCIA 0x00000400ULL /* PCMCIA support */
-#define CFG_CMD_IDE 0x00000800ULL /* IDE harddisk support */
-#define CFG_CMD_PCI 0x00001000ULL /* pciinfo */
-#define CFG_CMD_IRQ 0x00002000ULL /* irqinfo */
-#define CFG_CMD_BOOTD 0x00004000ULL /* bootd */
-#define CFG_CMD_CONSOLE 0x00008000ULL /* coninfo */
-#define CFG_CMD_EEPROM 0x00010000ULL /* EEPROM read/write support */
-#define CFG_CMD_ASKENV 0x00020000ULL /* ask for env variable */
-#define CFG_CMD_RUN 0x00040000ULL /* run command in env variable */
-#define CFG_CMD_ECHO 0x00080000ULL /* echo arguments */
-#define CFG_CMD_I2C 0x00100000ULL /* I2C serial bus support */
-#define CFG_CMD_REGINFO 0x00200000ULL /* Register dump */
-#define CFG_CMD_IMMAP 0x00400000ULL /* IMMR dump support */
-#define CFG_CMD_DATE 0x00800000ULL /* support for RTC, date/time...*/
-#define CFG_CMD_DHCP 0x01000000ULL /* DHCP Support */
-#define CFG_CMD_BEDBUG 0x02000000ULL /* Include BedBug Debugger */
-#define CFG_CMD_FDC 0x04000000ULL /* Floppy Disk Support */
-#define CFG_CMD_SCSI 0x08000000ULL /* SCSI Support */
-#define CFG_CMD_AUTOSCRIPT 0x10000000ULL /* Autoscript Support */
-#define CFG_CMD_MII 0x20000000ULL /* MII support */
-#define CFG_CMD_SETGETDCR 0x40000000ULL /* DCR support on 4xx */
-#define CFG_CMD_BSP 0x80000000ULL /* Board Specific functions */
-
-#define CFG_CMD_ELF 0x0000000100000000ULL /* ELF (VxWorks) load/boot cmd */
-#define CFG_CMD_MISC 0x0000000200000000ULL /* Misc functions like sleep etc*/
-#define CFG_CMD_USB 0x0000000400000000ULL /* USB Support */
-#define CFG_CMD_DOC 0x0000000800000000ULL /* Disk-On-Chip Support */
-#define CFG_CMD_JFFS2 0x0000001000000000ULL /* JFFS2 Support */
-#define CFG_CMD_DTT 0x0000002000000000ULL /* Digital Therm and Thermostat */
-#define CFG_CMD_SDRAM 0x0000004000000000ULL /* SDRAM DIMM SPD info printout */
-#define CFG_CMD_DIAG 0x0000008000000000ULL /* Diagnostics */
-#define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */
-#define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */
-#define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */
-#define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */
-#define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */
-#define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */
-#define CFG_CMD_NAND 0x0000800000000000ULL /* NAND support */
-#define CFG_CMD_BMP 0x0001000000000000ULL /* BMP support */
-#define CFG_CMD_PORTIO 0x0002000000000000ULL /* Port I/O */
-#define CFG_CMD_PING 0x0004000000000000ULL /* ping support */
-#define CFG_CMD_MMC 0x0008000000000000ULL /* MMC support */
-#define CFG_CMD_FAT 0x0010000000000000ULL /* FAT support */
-#define CFG_CMD_IMLS 0x0020000000000000ULL /* List all found images */
-#define CFG_CMD_ITEST 0x0040000000000000ULL /* Integer (and string) test */
-#define CFG_CMD_NFS 0x0080000000000000ULL /* NFS support */
-#define CFG_CMD_REISER 0x0100000000000000ULL /* Reiserfs support */
-#define CFG_CMD_CDP 0x0200000000000000ULL /* Cisco Discovery Protocol */
-#define CFG_CMD_XIMG 0x0400000000000000ULL /* Load part of Multi Image */
-#define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support */
-#define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */
-#define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */
-#define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */
-#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */
-
-#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */
-
-/* Commands that are considered "non-standard" for some reason
- * (memory hogs, requires special hardware, not fully tested, etc.)
- */
-#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_CDP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FAT | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MFSL | \
- CFG_CMD_MII | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_PING | \
- CFG_CMD_PORTIO | \
- CFG_CMD_REGINFO | \
- CFG_CMD_REISER | \
- CFG_CMD_SAVES | \
- CFG_CMD_SCSI | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
- CFG_CMD_VFD )
-
-/* Default configuration
- */
-#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
-
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
-#endif
-
-
-/*
- * optional BOOTP fields
- */
-
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001
-#define CONFIG_BOOTP_GATEWAY 0x00000002
-#define CONFIG_BOOTP_HOSTNAME 0x00000004
-#define CONFIG_BOOTP_NISDOMAIN 0x00000008
-#define CONFIG_BOOTP_BOOTPATH 0x00000010
-#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
-#define CONFIG_BOOTP_DNS 0x00000040
-#define CONFIG_BOOTP_DNS2 0x00000080
-#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100
-#define CONFIG_BOOTP_NTPSERVER 0x00000200
-#define CONFIG_BOOTP_TIMEOFFSET 0x00000400
-
-#define CONFIG_BOOTP_VENDOREX 0x80000000
-
-#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
-
-
-#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
- CONFIG_BOOTP_GATEWAY | \
- CONFIG_BOOTP_HOSTNAME | \
- CONFIG_BOOTP_BOOTPATH)
-
-#ifndef CONFIG_BOOTP_MASK
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-#endif
-
-#endif /* _CMD_CONFIG_H */
diff --git a/include/command.h b/include/command.h
index a2936ad..0597c10 100644
--- a/include/command.h
+++ b/include/command.h
@@ -84,12 +84,6 @@ typedef void command_t (cmd_tbl_t *, int, int, char *[]);
#define CMD_FLAG_REPEAT 0x0001 /* repeat last command */
#define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */
-/*
- * Configurable monitor commands definitions have been moved
- * to include/cmd_confdefs.h
- */
-
-
#define Struct_Section __attribute__ ((unused,section (".u_boot_cmd")))
#ifdef CFG_LONGHELP
diff --git a/include/common.h b/include/common.h
index d8b6b46..27a660a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -63,10 +63,19 @@ typedef volatile unsigned char vu_char;
#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
+#define CONFIG_RELOC_FIXUP_WORKS
#elif defined(CONFIG_MPC5xxx)
#include <mpc5xxx.h>
+#define CONFIG_RELOC_FIXUP_WORKS
+#elif defined(CONFIG_MPC512X)
+#include <mpc512x.h>
+#include <asm/immap_512x.h>
+#define CONFIG_RELOC_FIXUP_WORKS
#elif defined(CONFIG_MPC8220)
#include <asm/immap_8220.h>
+#define CONFIG_RELOC_FIXUP_WORKS
+#elif defined(CONFIG_824X)
+#define CONFIG_RELOC_FIXUP_WORKS
#elif defined(CONFIG_8260)
#if defined(CONFIG_MPC8247) \
|| defined(CONFIG_MPC8248) \
@@ -78,6 +87,7 @@ typedef volatile unsigned char vu_char;
#define CONFIG_MPC8260 1
#endif
#include <asm/immap_8260.h>
+#define CONFIG_RELOC_FIXUP_WORKS
#endif
#ifdef CONFIG_MPC86xx
#include <mpc86xx.h>
@@ -90,6 +100,7 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_MPC83XX
#include <mpc83xx.h>
#include <asm/immap_83xx.h>
+#define CONFIG_RELOC_FIXUP_WORKS
#endif
#ifdef CONFIG_4xx
#include <ppc4xx.h>
@@ -230,6 +241,9 @@ int saveenv (void);
void inline setenv (char *, char *);
#else
void setenv (char *, char *);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *, char *);
+#endif
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
@@ -448,6 +462,9 @@ int prt_8260_clks (void);
#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
+#if defined(CONFIG_MPC512x)
+int prt_mpc512xxx_clks (void);
+#endif
#if defined(CONFIG_MPC8220)
int prt_mpc8220_clks (void);
#endif
@@ -512,6 +529,8 @@ void cpu_init_f (void);
int cpu_init_r (void);
#if defined(CONFIG_8260)
int prt_8260_rsr (void);
+#elif defined(CONFIG_MPC83XX)
+int prt_83xx_rsr (void);
#endif
/* $(CPU)/interrupts.c */
@@ -626,9 +645,13 @@ int fgetc(int file);
int pcmcia_init (void);
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress (int status);
+#ifdef CONFIG_STATUS_LED
+# include <status_led.h>
#endif
+/*
+ * Board-specific Platform code can reimplement show_boot_progress () if needed
+ */
+void inline show_boot_progress (int val);
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
new file mode 100644
index 0000000..3d91e99
--- /dev/null
+++ b/include/config_cmd_all.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_CMD_ALL_H
+#define _CONFIG_CMD_ALL_H
+
+/*
+ * Alphabetical list of all possible commands.
+ */
+
+#define CONFIG_CMD_ASKENV /* ask for env variable */
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
+#define CONFIG_CMD_BMP /* BMP support */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_BSP /* Board Specific functions */
+#define CONFIG_CMD_CACHE /* icache, dcache */
+#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#define CONFIG_CMD_DIAG /* Diagnostics */
+#define CONFIG_CMD_DISPLAY /* Display support */
+#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
+#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
+#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
+#define CONFIG_CMD_ENV /* saveenv */
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_FDC /* Floppy Disk Support */
+#define CONFIG_CMD_FDOS /* Floppy DOS support */
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_IDE /* IDE harddisk support */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_IMMAP /* IMMR dump support */
+#define CONFIG_CMD_IRQ /* irqinfo */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#define CONFIG_CMD_KGDB /* kgdb */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
+#define CONFIG_CMD_MII /* MII support */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PCI /* pciinfo */
+#define CONFIG_CMD_PCMCIA /* PCMCIA support */
+#define CONFIG_CMD_PING /* ping support */
+#define CONFIG_CMD_PORTIO /* Port I/O */
+#define CONFIG_CMD_REGINFO /* Register dump */
+#define CONFIG_CMD_REISER /* Reiserfs support */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVES /* save S record dump */
+#define CONFIG_CMD_SCSI /* SCSI Support */
+#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SNTP /* SNTP support */
+#define CONFIG_CMD_SPI /* SPI utility */
+#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
+#define CONFIG_CMD_USB /* USB Support */
+#define CONFIG_CMD_VFD /* VFD support (TRAB) */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */
+
+#endif /* _CONFIG_CMD_ALL_H */
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
new file mode 100644
index 0000000..f61cfc9
--- /dev/null
+++ b/include/config_cmd_default.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_CMD_DEFAULT_H
+#define _CONFIG_CMD_DEFAULT_H
+
+/*
+ * Alphabetical list of all commands that are configured by default.
+ * This is essentially all commands minus those that are considered
+ * "non-standard" for some reason (memory hogs, requires special
+ * hardware, not fully tested, etc.).
+ */
+
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_ENV /* saveenv */
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+#endif /* _CONFIG_CMD_DEFAULT_H */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index ca9592c..0a9a1ff 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -52,23 +52,20 @@
#define CONFIG_BOOTDELAY 5
-#if 0
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_FLASH | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_NET | \
- CFG_CMD_PCI )
-#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
/*
@@ -309,7 +306,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index 821efe5..4632991 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -59,21 +59,32 @@
#define CONFIG_IPADDR 10.0.18.222
#define CONFIG_SERVERIP 10.0.18.190
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -185,7 +196,7 @@
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 2efca10..77938b1 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -401,15 +401,8 @@
#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */
-#define __SPI_CMD_OFF 0 /* allow default commands: */
- /* CFG_CMD_SPI */
- /* CFG_CMD_DATE */
-
#else
#undef CONFIG_NIOS_SPI /* NO SPI support */
-#define __SPI_CMD_OFF ( CFG_CMD_SPI \
- | CFG_CMD_DATE \
- )
#endif
/*------------------------------------------------------------------------
@@ -570,45 +563,55 @@
#define CONFIG_POST CFG_POST_RTC
#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_MMC | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_SCSI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG | \
- __SPI_CMD_OFF ) )
-
-
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
+#if (CFG_NIOS_CPU_SPI_NUMS != 1)
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_DATE
+#endif
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
@@ -651,7 +654,6 @@
#undef CFG_LOAD_ADDR /* force error break */
#endif
-
/* MEM test area */
#if (CFG_SDRAM_SIZE != 0)
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index df20965..2ee8c61 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -37,13 +37,19 @@
#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_PCMCIA \
- | CFG_CMD_PING \
- )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
+/* This is picked up again in fads.h */
+#define FADS_COMMANDS_ALREADY_DEFINED
#include "fads.h"
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
index 14d56bf..6f64038 100644
--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -61,7 +61,25 @@
#undef CONFIG_BOOTARGS
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -70,29 +88,22 @@
#endif
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -196,7 +207,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index ba4b1a2..d25aa74 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -66,18 +66,28 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_IRQ | \
- CFG_CMD_MVENV | \
- CFG_CMD_PCI | \
- CFG_CMD_PING \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MVENV
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -89,7 +99,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -188,7 +198,7 @@
*/
#define CFG_DCACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -228,7 +238,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 3df99a0..f6495e4 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -67,27 +67,38 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
@@ -106,7 +117,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -266,7 +277,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 1cd0280..0f301ec 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -71,17 +71,29 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -92,7 +104,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -207,7 +219,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 584f490..0718c85 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -63,19 +63,31 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -95,7 +107,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -251,7 +263,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 0e6b50f..4304ecc 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -52,15 +52,26 @@
#define CFG_8xx_CPUCLK_MAX 133000000
#endif /* CONFIG_MPC852T */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
new file mode 100644
index 0000000..a4f7f9a
--- /dev/null
+++ b/include/configs/AdderUSB.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 CodeHermit.
+ * Bryan O'Donoghue <bodonoghue@codehermit.ie>
+ *
+ * Provides support for USB console on the Analogue & Micro Adder87x
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ADDERUSB__
+#define __ADDERUSB__
+
+/* Include the board port */
+#include "Adder.h"
+
+#define CONFIG_USB_DEVICE /* Include UDC driver */
+#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */
+#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */
+#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */
+#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */
+
+/* If you have a USB-IF assigned VendorID then you may wish to define
+ * your own vendor specific values either in BoardName.h or directly in
+ * usbd_vendor_info.h
+ */
+
+/*
+#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie"
+#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot"
+#define CONFIG_USBD_VENDORID 0xFFFF
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE
+*/
+
+#endif /* __ADDERUSB_H__ */
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index c08b2c3..3f2f614 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -39,12 +39,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -70,31 +64,40 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#define CONFIG_NET_MULTI
#define CONFIG_MII
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Autobooting
*/
@@ -282,7 +285,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -298,6 +301,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h
index ea50f41..d914dcc 100644
--- a/include/configs/AmigaOneG3SE.h
+++ b/include/configs/AmigaOneG3SE.h
@@ -56,38 +56,46 @@
#define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk=4096"
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_AMIGA_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_NET | \
- CFG_CMD_IDE | \
- CFG_CMD_FDC | \
- CFG_CMD_CACHE | \
- CFG_CMD_CONSOLE| \
- CFG_CMD_USB | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI )
-
-/* CFG_CMD_MII | \ */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CONSOLE|
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+
#define CONFIG_PCI 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
+#define atoi(x) simple_strtoul(x,NULL,10)
/*
* Miscellaneous configurable options
@@ -247,7 +255,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -348,8 +356,6 @@
#define CONFIG_3COM
/* #define CONFIG_BOOTP_RANDOM_DELAY */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
/*
* USB configuration
diff --git a/include/configs/B2.h b/include/configs/B2.h
index e55858d..f1411db 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -72,16 +72,26 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C )
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 5
#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index 46bdfa2..c11e9c9 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -66,14 +66,30 @@
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 |\
- CFG_CMD_SCSI | CFG_CMD_IDE | CFG_CMD_DATE |\
- CFG_CMD_FDC | CFG_CMD_ELF)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -86,7 +102,7 @@
*/
#define CONFIG_CONS_INDEX 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -436,7 +452,7 @@ extern unsigned long bab7xx_get_gclk_freq (void);
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index bc30977..5c2bfc9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -61,11 +61,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -106,12 +101,6 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#ifdef CONFIG_PCI
-# define ADD_PCI_CMD CFG_CMD_PCI
-#else
-# define ADD_PCI_CMD 0
-#endif
-
/*
* Video console
*/
@@ -126,12 +115,6 @@
# define CONFIG_SPLASH_SCREEN
# define CFG_CONSOLE_IS_IN_ENV
-#ifdef CONFIG_VIDEO
-# define ADD_BMP_CMD CFG_CMD_BMP
-#else
-# define ADD_BMP_CMD 0
-#endif
-
/*
* Partitions
*/
@@ -144,10 +127,7 @@
*/
#ifdef CONFIG_BC3450_USB
# define CONFIG_USB_OHCI
-# define ADD_USB_CMD CFG_CMD_USB
# define CONFIG_USB_STORAGE
-#else /* !CONFIG_BC3450_USB */
-# define ADD_USB_CMD 0
#endif /* CONFIG_BC3450_USB */
/*
@@ -158,66 +138,69 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-# define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-# define CFG_CMD_POST_DIAG 0
#endif /* CONFIG_POST */
-/*
- * IDE
- */
-#ifdef CONFIG_BC3450_IDE
-# define ADD_IDE_CMD CFG_CMD_IDE
-#else
-# define ADD_IDE_CMD 0
-#endif /* CONFIG_BC3450_IDE */
/*
- * Filesystem support
+ * BOOTP options
*/
-#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB)
-#ifdef CONFIG_FAT
-# define ADD_FAT_CMD CFG_CMD_FAT
-#else
-# define ADD_FAT_CMD 0
-#endif /* CONFIG_FAT */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#ifdef CONFIG_EXT2
-# define ADD_EXT2_CMD CFG_CMD_EXT2
-#else
-# define ADD_EXT2_CMD 0
-#endif /* CONFIG_EXT2 */
-#endif /* CONFIG_BC3450_IDE / _USB */
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- ADD_IDE_CMD | \
- ADD_FAT_CMD | \
- ADD_EXT2_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP | \
- CFG_CMD_BSP)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+
+#ifdef CONFIG_VIDEO
+ #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_BC3450_IDE
+ #define CONFIG_CMD_IDE
+#endif
+
+#if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB)
+ #ifdef CONFIG_FAT
+ #define CONFIG_CMD_FAT
+ #endif
+
+ #ifdef CONFIG_EXT2
+ #define CONFIG_CMD_EXT2
+ #endif
+#endif
+
+#ifdef CONFIG_BC3450_USB
+ #define CONFIG_CMD_USB
+#endif
+
+#ifdef CONFIG_PCI
+ #define CONFIG_CMD_PCI
+#endif
+
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -450,7 +433,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -469,9 +452,13 @@
#define CFG_HZ 1000 /* dec freq: 1ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 3bd43d8..bb7856f 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -64,28 +64,35 @@
#define CFG_DOC_SUPPORT_2000 1
#define CFG_DOC_SUPPORT_MILLENNIUM 1
#define CFG_DOC_SHORT_TIMEOUT 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- 0 )
-/* CFG_CMD_DOC required legacy NAND support */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+
+
+/* CONFIG_CMD_DOC required legacy NAND support */
#define CFG_NAND_LEGACY
#if 0
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \
- CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE)
-
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
#endif
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
-
/*
* Miscellaneous configurable options
*/
@@ -293,7 +300,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index e0262a8..ae32f6b 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -56,13 +56,26 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \
- CFG_CMD_IRQ | \
- CFG_CMD_EEPROM ) & \
- ~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_EEPROM
+
+#undef CONFIG_CMD_NET
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -73,7 +86,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -173,7 +186,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 7ec4599..62a2eaa 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -119,24 +119,36 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
@@ -155,7 +167,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -413,7 +425,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index e8994ff..9f06957 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -94,27 +94,35 @@
#define CONFIG_MAC_PARTITION /* nod used yet */
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 9695211..1fd2b53 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -60,26 +60,35 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -98,7 +107,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -268,7 +277,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index b882f7a..aea8523 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -54,27 +54,36 @@
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_FLASH | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
/*
@@ -325,7 +334,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 56fd9a6..a3717b9 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -54,16 +54,29 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -80,7 +93,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -216,7 +229,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 9c04129..1b948f6 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -60,29 +60,38 @@
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_EEPROM )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -98,7 +107,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -262,7 +271,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 2a328a6..fb71c5f 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -64,25 +64,37 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#if 0 /* test-only */
#define CONFIG_NETCONSOLE
@@ -102,9 +114,6 @@
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -120,7 +129,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -314,7 +323,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 6946686..4994319 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -64,33 +64,42 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -106,7 +115,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -285,7 +294,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 4ae240e..29f9292 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -63,25 +63,37 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#if 0 /* test-only */
#define CONFIG_NETCONSOLE
@@ -99,9 +111,6 @@
#undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -117,7 +126,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -316,7 +325,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index 7b5f728..318ada1 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -172,29 +172,27 @@
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#if 0 /* test-only */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
-#else
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM )
-/* test-only: support fehlt bisher... */
-/* CFG_CMD_IDE | \*/
-/* CFG_CMD_PCI | \*/
-#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -205,7 +203,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -269,7 +267,7 @@
*/
#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -291,7 +289,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index bc23fc0..48e29a2 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -133,29 +133,36 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
-
-
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C \
- | CFG_CMD_CACHE \
- | CFG_CMD_EEPROM \
- | CFG_CMD_PCI \
- | CFG_CMD_ELF \
- | CFG_CMD_DATE \
- | CFG_CMD_NET \
- | CFG_CMD_PING \
- | CFG_CMD_IDE \
- | CFG_CMD_FAT \
- | CFG_CMD_EXT2 \
- )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+
+#define CONFIG_DOS_PARTITION
#define CONFIG_USE_CPCIDVI
@@ -179,7 +186,7 @@
#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -585,7 +592,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 93d49f3..c7b623a 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -54,15 +54,36 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -73,7 +94,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -189,7 +210,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 16a9ea5..c589f28 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -68,9 +68,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -163,27 +161,37 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -348,7 +356,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index ce969ec..b087eba 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -69,9 +69,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -167,27 +165,31 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI)
-#else /* ! PCI */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C )
-#endif /* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+ #define CONFIG_CMD_PCI
+#endif
+
#define CFG_NAND_LEGACY
@@ -196,7 +198,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -369,7 +371,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 63d7a92..a965c12 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -75,38 +75,42 @@
#define CONFIG_AUTOSCRIPT 1
-#define CONFIG_COMMANDS (\
- CFG_CMD_BDI|\
- CFG_CMD_IMI|\
- CFG_CMD_FLASH|\
- CFG_CMD_MEMORY|\
- CFG_CMD_NET|\
- CFG_CMD_ENV|\
- CFG_CMD_CONSOLE|\
- CFG_CMD_ASKENV|\
- CFG_CMD_ECHO|\
- CFG_CMD_IMMAP|\
- CFG_CMD_REGINFO|\
- CFG_CMD_DHCP|\
- CFG_CMD_DATE|\
- CFG_CMD_RUN|\
- CFG_CMD_I2C|\
- CFG_CMD_EEPROM|\
- CFG_CMD_DIAG|\
- CFG_CMD_AUTOSCRIPT|\
- CFG_CMD_SETGETDCR)
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SETGETDCR
+
/*
- * optional BOOTP / DHCP fields
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (\
- CONFIG_BOOTP_VENDOREX|\
- CONFIG_BOOTP_SUBNETMASK|\
- CONFIG_BOOTP_GATEWAY|\
- CONFIG_BOOTP_DNS|\
- CONFIG_BOOTP_HOSTNAME|\
- CONFIG_BOOTP_BOOTFILESIZE|\
- CONFIG_BOOTP_BOOTPATH)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/*
* how many time to fail & restart a net-TFTP before giving up & resetting
@@ -123,9 +127,6 @@
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index acc8484..68e816a 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -55,21 +55,29 @@
#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- 0 /* CFG_CMD_DATE */ | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
/*
@@ -278,7 +286,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 997e1ba..627ea14 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -57,32 +57,35 @@
#define CONFIG_IPADDR 10.0.18.222
#define CONFIG_SERVERIP 10.0.18.190
-#if 0
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_BSP | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF )
-#else
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP )
-#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+
#if 0 /* Does not appear to be used?! If it is used, needs to be fixed */
#define CONFIG_SOFT_I2C /* Software I2C support enabled */
#endif
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -184,7 +187,7 @@
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index bd7aff1..db2e96c 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -215,8 +215,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
/*
* JFFS2 partitions
*
@@ -239,17 +247,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)"
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C \
- | CFG_CMD_EEPROM \
- | CFG_CMD_CACHE \
- | CFG_CMD_JFFS2 \
- | CFG_CMD_PCI \
- | CFG_CMD_NET )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
/*
* Miscellaneous configurable options
@@ -261,7 +272,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
/* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -558,7 +569,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index 4b72e9b..b5d3f77 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -153,8 +153,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
/*
* JFFS2 partitions
*
@@ -177,17 +185,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
#define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)"
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C \
- | CFG_CMD_EEPROM \
- | CFG_CMD_CACHE \
- | CFG_CMD_JFFS2 \
- | CFG_CMD_PCI \
- | CFG_CMD_NET )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
/*
* Miscellaneous configurable options
@@ -199,7 +210,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
/* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -496,7 +507,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index b58846d..0ddf0e3 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -446,46 +446,55 @@
#define CONFIG_NIOS_ASMI /* Enable ASMI */
#define CFG_NIOS_ASMIBASE CFG_NIOS_CPU_ASMI0 /* ASMI base address */
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_MMC | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG ) )
-
-
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
/*------------------------------------------------------------------------
* COMPACT FLASH
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
#define CONFIG_IDE_PREINIT /* Implement id_preinit */
#define CFG_IDE_MAXBUS 1 /* 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
@@ -503,12 +512,12 @@
#define CFG_CF_POWER 0x009209c0 /* CF Power FET PIO base*/
#define CFG_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 3e3803c..0032fd3 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -454,47 +454,55 @@
#endif /* CFG_NIOS_CPU_PIO_NUMS */
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_MMC | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG ) )
-
-
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef COND_CMD_BEDBUG
+#undef COND_CMD_BMP
+#undef COND_CMD_BSP
+#undef COND_CMD_CACHE
+#undef COND_CMD_DATE
+#undef COND_CMD_DOC
+#undef COND_CMD_DTT
+#undef COND_CMD_EEPROM
+#undef COND_CMD_ELF
+#undef COND_CMD_FAT
+#undef COND_CMD_FDC
+#undef COND_CMD_FDOS
+#undef COND_CMD_HWFLOW
+#undef COND_CMD_IDE
+#undef COND_CMD_I2C
+#undef COND_CMD_JFFS2
+#undef COND_CMD_KGDB
+#undef COND_CMD_NAND
+#undef COND_CMD_NFS
+#undef COND_CMD_MMC
+#undef COND_CMD_MII
+#undef COND_CMD_PCI
+#undef COND_CMD_PCMCIA
+#undef COND_CMD_SCSI
+#undef COND_CMD_SPI
+#undef COND_CMD_VFD
+#undef COND_CMD_USB
+#undef COND_CMD_XIMG
+
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 2ae794d..2eadbea 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -55,17 +55,29 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -87,7 +99,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -235,7 +247,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 5489a53..5c595f5 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -58,21 +58,33 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* BQ3285 is MC146818 compatible*/
@@ -85,7 +97,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -225,7 +237,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 720b335..a8697ec 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -68,17 +68,29 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_LOADB
+
#define CONFIG_BOOTDELAY 5
#define CFG_PROMPT "\nEV123 U-Boot> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 2c99b4b..bb77188 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -66,12 +66,25 @@
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -84,7 +97,7 @@
*/
#define CONFIG_CONS_INDEX 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -317,7 +330,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index e73bcec..f927a2c 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -81,7 +81,15 @@
""
#define CONFIG_BOOTCOMMAND "run ramboot"
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
@@ -91,12 +99,15 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+
/*
* Miscellaneous configurable options
@@ -104,7 +115,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -224,7 +235,7 @@
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
index 5507f35..cfa6335 100644
--- a/include/configs/EP1C20.h
+++ b/include/configs/EP1C20.h
@@ -160,25 +160,36 @@
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_SAVES )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_BOOTD
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
/*------------------------------------------------------------------------
* MISC
diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h
index 6eca9f2..7c526f7 100644
--- a/include/configs/EP1S10.h
+++ b/include/configs/EP1S10.h
@@ -154,25 +154,35 @@
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_SAVES )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
/*------------------------------------------------------------------------
* MISC
diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h
index 976e79a..1fe8f68 100644
--- a/include/configs/EP1S40.h
+++ b/include/configs/EP1S40.h
@@ -154,25 +154,35 @@
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_SAVES )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
/*------------------------------------------------------------------------
* MISC
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index 738763b..89e0eeb 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -50,15 +50,25 @@
#define CFG_8xx_CPUCLK_MIN 40000000
#define CFG_8xx_CPUCLK_MAX 133000000
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index c203aea..5d48d2b 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -96,23 +96,26 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH)
/*
- * #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | \
- * CFG_CMD_KGDB | CFG_CMD_I2C | CFG_CMD_EEPROM | \
- * CFG_CMD_ENV | CFG_CMD_FLASH)
+ * BOOTP options
*/
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-/* CFG_CMD_ENV est definie */
-/* ((CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_KGDB) & ~(CFG_CMD_ENV))
+
+/*
+ * Command line configuration.
*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -121,7 +124,7 @@
*/
#undef CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -325,7 +328,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -365,7 +368,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h
index b176c6f..66e1203 100644
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -70,10 +70,21 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "BOOT: " /* Monitor Command Prompt */
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
index d55eb7d..ed439b1 100644
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -82,17 +82,29 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -179,7 +191,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index 78e5716..1c44a0c 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -103,21 +103,30 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV)
+#define CONFIG_CMD_ASKENV
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -391,7 +400,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index d85be42..a3f38bb 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -82,10 +82,21 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -94,7 +105,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -206,7 +217,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 1b562d6..a562b2f 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -46,7 +46,6 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-/*Now included by CFG_CMD_PCMCIA */
/*#define CONFIG_PCMCIA 1 / * To enable PCMCIA support */
/* Video related */
@@ -105,17 +104,39 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_TIMEOFFSET
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -190,7 +211,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 2a986f0..c8ce259 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -61,15 +61,28 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
/*
* Miscellaneous configurable options
*/
#undef CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -148,7 +161,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index 8babee1..431844c 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -62,21 +62,39 @@
/*#define CONFIG_WATCHDOG*/ /* watchdog enabled */
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
-#define CONFIG_COMMANDS (CFG_CMD_BDI | CFG_CMD_IMI | CFG_CMD_CACHE | \
- CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_LOADS | \
- CFG_CMD_ENV | CFG_CMD_REGINFO | CFG_CMD_IMMAP | CFG_CMD_NET)
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "EEG> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -152,7 +170,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 0dd21bc..322158c 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -60,24 +60,45 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~( \
- CFG_CMD_CONSOLE | \
- CFG_CMD_BDI | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_CACHE ) )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_TIMEOFFSET
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_CACHE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -160,7 +181,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 423d74e..f8698b5 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -58,26 +58,45 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_TIMEOFFSET
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -160,7 +179,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index db42fd0..9c713c6 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -88,20 +88,32 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -120,7 +132,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -324,7 +336,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 6613f90..bfbf3a8 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -132,9 +132,12 @@
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE \
- )
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/*
* The GEN860T network interface uses the on-chip 10/100 FEC with
@@ -222,35 +225,30 @@
CFG_POST_UART | \
CFG_POST_SPR )
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
/*
- * List of available monitor commands. Use the system default list
- * plus add some of the "non-standard" commands back in.
- * See ./cmd_confdefs.h
- */
-#define BASE_CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_FPGA | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_POST_DIAG )
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
#if !defined(CONFIG_SC)
-#define CONFIG_COMMANDS ( BASE_CONFIG_COMMANDS | CFG_CMD_DOC )
-#else
-#define CONFIG_COMMANDS BASE_CONFIG_COMMANDS
+ #define CONFIG_CMD_DOC
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
#endif
/*
@@ -279,11 +277,6 @@
#define CFG_FPGA_PROG_FEEDBACK
-/************************************************************************
- * This must be included AFTER the definition of any CONFIG_COMMANDS
- */
-#include <cmd_confdefs.h>
-
#define CFG_NAND_LEGACY
/*
@@ -306,7 +299,7 @@
/*
* Set buffer size for console I/O
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024
#else
#define CFG_CBSIZE 256
@@ -471,7 +464,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of above value */
#endif
diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
index 8c01d97..785355a 100644
--- a/include/configs/GENIETV.h
+++ b/include/configs/GENIETV.h
@@ -105,15 +105,28 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -193,7 +206,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 03b9659..79f5714 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -97,18 +97,32 @@
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -190,7 +204,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index f36777a..ea8e61a 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -98,26 +98,40 @@
#define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */
#define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20) /* for decompressed img */
-#define ADD_BMP_CMD CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD 0
#endif /* CONFIG_VIDEO */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_EXT2 | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- ADD_BMP_CMD | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -127,9 +141,6 @@
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
#undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_BZIP2 /* include support for bzip2 compressed images */
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -146,7 +157,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -356,7 +367,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index 6864740..26dd954 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -52,16 +52,27 @@
#define CONFIG_BAUDRATE 9600
#define CONFIG_DRAM_SPEED 100 /* MHz */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_PCI | \
- CFG_CMD_PING )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
/*
* Miscellaneous configurable options
@@ -363,7 +374,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 7cce876..02ae5d0 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -117,7 +117,15 @@
#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -125,31 +133,25 @@
#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_SPLASH_SCREEN
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#else
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+ #define CONFIG_CMD_BMP
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -164,7 +166,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -247,7 +249,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 88cc6a4..ed669c5 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -60,18 +60,30 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -88,7 +100,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -250,7 +262,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 35d84ae..bd0894c 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -84,7 +84,15 @@
/* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
@@ -123,20 +131,23 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -217,7 +228,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index cd17935..27a5bc3 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -81,7 +81,15 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
@@ -123,25 +131,28 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -228,7 +239,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 29eb874..85d2bb3 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -128,9 +128,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -159,24 +157,34 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_NAND | \
- CFG_CMD_I2C | \
- CFG_CMD_SNTP )
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -234,7 +242,7 @@
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#define CFG_NAND_LEGACY
#define CFG_NAND0_BASE 0xE1000000
@@ -295,7 +303,7 @@
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x0)) = (__u8)d; } while(0)
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr + 0x0)))
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
/*-----------------------------------------------------------------------
* Hard Reset Configuration Words
@@ -355,7 +363,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -474,7 +482,7 @@
#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\
ORxG_SCY_6_CLK )
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
/* Bank 1 - NAND Flash
*/
#define CFG_NAND_BASE CFG_NAND0_BASE
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 0e20e56..bd961d8 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -88,28 +88,32 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-
-/*----------------------------------------------------------------------*/
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/*----------------------------------------------------------------------*/
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -202,7 +206,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index c1565fc..6fee455 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -67,8 +67,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -95,7 +94,14 @@
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#define CONFIG_BAUDRATE 19200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
/*
* select i2c support configuration
@@ -124,17 +130,18 @@
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram rw"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -149,7 +156,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -257,7 +264,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 706bdb9..965b515 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -58,8 +58,7 @@
* for FCC).
*
* If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
- * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */
@@ -106,17 +105,28 @@
#define CONFIG_8260_CLKIN 65536000 /* in Hz */
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_REGINFO \
- )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index a0cb1dd..1142f2a 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -72,24 +72,33 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK \
- ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -182,7 +191,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 46b4d53..bd19dad 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -72,24 +72,32 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK \
- ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -179,7 +187,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 73be069..53261548 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -37,11 +37,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -69,7 +64,6 @@
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
-#define ADD_PCI_CMD CFG_CMD_PCI
#endif
#define CFG_XLB_PIPELINING 1
@@ -80,11 +74,8 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#else /* MPC5100 */
-
+#else
#define CONFIG_MII 1
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
-
#endif
/* Partitions */
@@ -93,31 +84,44 @@
#define CONFIG_ISO_PARTITION
/* USB */
-#if 1
-#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
-#endif
+#define CFG_OHCI_BE_CONTROLLER
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- ADD_PCI_CMD | \
- ADD_USB_CMD )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CFG_LOWBOOT 1
@@ -312,7 +316,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -328,6 +332,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 7fa9ed2..ea3b0b4 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -135,20 +135,32 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_FLASH | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_PCI | \
- CFG_CMD_PING )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
/* watchdog disabled */
#undef CONFIG_WATCHDOG
@@ -167,7 +179,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -272,7 +284,7 @@
*/
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -298,7 +310,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 48b94ee..3644e43 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -178,23 +178,34 @@
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
-/*-----------------------------------------------------------------------
- * Console/Commands/Parser
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_PING | \
- CFG_CMD_DIAG | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_ELF | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+
/* Include NetConsole support */
#define CONFIG_NETCONSOLE
@@ -203,10 +214,6 @@
#define CONFIG_AUTO_COMPLETE 1
#define CFG_ALT_MEMTEST 1 /* use real memory test */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
@@ -217,7 +224,7 @@
/*-----------------------------------------------------------------------
* Console Buffer
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -279,7 +286,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
#endif
@@ -291,7 +298,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
#endif
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 9b950fc..f6c31ea 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -89,7 +89,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -156,32 +164,31 @@
#define CONFIG_POST (CFG_POST_CPU | \
CFG_POST_RTC | \
CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -269,7 +276,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index cd38b0f..e558aa4 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -99,7 +99,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -167,34 +175,33 @@
#define CONFIG_POST (CFG_POST_CPU | \
CFG_POST_RTC | \
CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -281,7 +288,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index e44f1cc..46edd08 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -74,64 +74,68 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-#define CONFIG_CMD_MINIMAL 0
-#define CONFIG_CMD_TINY (CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB)
-#define CONFIG_CMD_NORMAL (CONFIG_CMD_DFL & ~CFG_CMD_BOOTD & ~CFG_CMD_REISER)
-#define CONFIG_CMD_GDB (CONFIG_CMD_NORMAL | CFG_CMD_KGDB)
-#define CONFIG_CMD_FULL (CFG_CMD_ALL & ~CFG_CMD_BEDBUG \
- & ~CFG_CMD_BMP \
- & ~CFG_CMD_BSP \
- & ~CFG_CMD_DISPLAY \
- & ~CFG_CMD_DOC \
- & ~CFG_CMD_DTT \
- & ~CFG_CMD_EEPROM \
- & ~CFG_CMD_ELF \
- & ~CFG_CMD_EXT2 \
- & ~CFG_CMD_FDC \
- & ~CFG_CMD_FDOS \
- & ~CFG_CMD_HWFLOW \
- & ~CFG_CMD_I2C \
- & ~CFG_CMD_IDE \
- & ~CFG_CMD_IRQ \
- & ~CFG_CMD_JFFS2 \
- & ~CFG_CMD_KGDB \
- & ~CFG_CMD_MII \
- & ~CFG_CMD_MMC \
- & ~CFG_CMD_NAND \
- & ~CFG_CMD_PCI \
- & ~CFG_CMD_PCMCIA \
- & ~CFG_CMD_REISER \
- & ~CFG_CMD_SCSI \
- & ~CFG_CMD_SPI \
- & ~CFG_CMD_UNIVERSE\
- & ~CFG_CMD_USB \
- & ~CFG_CMD_VFD \
- & ~CFG_CMD_XIMG )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-#if CONFIG_LANTEC >= 2
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
+#if !(CONFIG_LANTEC >= 2)
+ #undef CONFIG_CMD_DATE
+ #undef CONFIG_CMD_NET
#endif
+
#if CONFIG_LANTEC >= 2
-# define CONFIG_COMMANDS CONFIG_CMD_FULL
-#else
-# define CONFIG_COMMANDS (CONFIG_CMD_FULL & ~CFG_CMD_DATE & ~CFG_CMD_NET)
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -203,7 +207,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index f0fc013..885a882 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -65,15 +65,31 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB))
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CFG_PROMPT "=> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 5fd6a95..cc456dc 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -60,17 +60,33 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) | \
- CFG_CMD_MII)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+
+
#define CONFIG_BOOTDELAY 5
#define CFG_PROMPT "-> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index cbb3e3b..f2a7644 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -51,16 +51,30 @@
#define CFG_ENV_IS_IN_FLASH 1
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 5
#define CFG_PROMPT "-> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index d6e3fb8..d9f2add 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -71,13 +71,27 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_COMMANDS ( CFG_CMD_NET | CONFIG_CMD_DFL | CFG_CMD_SDRAM | \
- CFG_CMD_PCMCIA | CFG_CMD_IDE )
-#define CONFIG_DOS_PARTITION
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_IDE
+
+
+#define CONFIG_DOS_PARTITION
/*
* Miscellaneous configurable options
@@ -88,7 +102,7 @@
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -187,7 +201,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h
index 0ca0970..69d195d 100644
--- a/include/configs/MBX860T.h
+++ b/include/configs/MBX860T.h
@@ -151,7 +151,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 7aae2bd..8d7ec59 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -242,26 +242,33 @@
#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
-/*-----------------------------------------------------------------------
- * Console/Commands/Parser
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_PING | \
- CFG_CMD_DIAG | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_ELF | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT)
-
-/* tbs 09-March-2005 Removed to be able to use 2nd serial */
-/* CFG_CMD_KGDB | \ */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
/* Include NetConsole support */
@@ -272,10 +279,6 @@
#define CONFIG_AUTO_COMPLETE 1
#define CFG_ALT_MEMTEST 1 /* use real memory test */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */
@@ -286,7 +289,7 @@
/*-----------------------------------------------------------------------
* Console Buffer
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -348,7 +351,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
#endif
@@ -360,7 +363,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
#endif
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 53684ca..dde7742 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -115,25 +115,36 @@
#define CONFIG_BR0_WORKAROUND 1
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_REGINFO )
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_REGINFO
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -225,7 +236,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 7e57a0f..5b526a0 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -50,41 +50,43 @@
***********************************************************/
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-/***********************************************************
- * Command definitions
- ***********************************************************/
-#define MIP405_COMMON_CMDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SAVES | \
- CFG_CMD_BSP )
-#if defined(CONFIG_MIP405T)
-#define CONFIG_COMMANDS \
- MIP405_COMMON_CMDS
-#else
-#define CONFIG_COMMANDS \
- (MIP405_COMMON_CMDS | \
- CFG_CMD_USB | \
- CFG_CMD_DOC )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_BSP
+
+#if !defined(CONFIG_MIP405T)
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_DOC
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CFG_NAND_LEGACY
@@ -165,7 +167,7 @@
**********************************************************/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -260,7 +262,7 @@
*/
#define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -426,7 +428,7 @@
/************************************************************
* Debug support
************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index d8805ea..f488275 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -76,20 +76,31 @@
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & \
- ~( CFG_CMD_NET | \
- CFG_CMD_RTC | \
- CFG_CMD_PCI | \
- CFG_CMD_I2C \
- ) ) | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF | \
- CFG_CMD_JFFS2 )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_KGDB
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_JFFS2
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_RTC
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_I2C
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -102,7 +113,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -195,7 +206,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -236,7 +247,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index 6ad2feb..9370c24 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -58,14 +58,31 @@
#endif
#define CONFIG_BOOTARGS "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138"
#define CONFIG_BOOTDELAY 3
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_ASKENV|CFG_CMD_DATE)
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+
+
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ETH_ADDR "00:10:18:10:00:06"
#define CONFIG_DOS_PARTITION 1 /* MSDOS bootable partitiion support */
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
+
#include "../board/mousse/mousse.h"
/*
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 6195bca..713518d 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -101,8 +101,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -198,59 +197,69 @@
#define CONFIG_BAUDRATE 115200
-#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_KGDB | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_SNTP | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
#if CONFIG_ADSTYPE == CFG_8272ADS
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_SDRAM | \
- CFG_CMD_I2C | \
- CFG_EXCLUDE ) )
+ #undef CONFIG_CMD_SDRAM
+ #undef CONFIG_CMD_I2C
+
#elif CONFIG_ADSTYPE >= CFG_PQ2FADS
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_SDRAM | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI | \
- CFG_EXCLUDE ) )
+ #undef CONFIG_CMD_SDRAM
+ #undef CONFIG_CMD_I2C
+ #undef CONFIG_CMD_PCI
+
#else
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CMD_CFG_PCI | \
- CFG_EXCLUDE ) )
+ #undef CONFIG_CMD_PCI
+
#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/mtdblock2"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -268,7 +277,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -384,7 +393,7 @@
#endif /* CFG_RAMBOOT */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -397,9 +406,9 @@
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
#define CFG_SCCR SCCR_DFBRG01
-#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
#define CFG_OR0_PRELIM 0xFF800876
-#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
+#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801)
#define CFG_OR1_PRELIM 0xFFFF8010
/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 4953b70..14b041e 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -83,8 +83,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -141,40 +140,43 @@
*/
#define SPD_EEPROM_ADDRESS 0x50
-
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_SNTP | \
- CFG_CMD_VFD | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG ) )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
@@ -202,21 +204,19 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_NFS */
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -231,7 +231,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -283,7 +283,6 @@
#define SDRAM_SPD_ADDR 0x50
-
/*-----------------------------------------------------------------------
* BR2,BR3 - Base Register
* Ref: Section 10.3.1 on page 10-14
@@ -381,7 +380,6 @@
#error "INVALID SDRAM CONFIGURATION"
#endif
-
#define RS232EN_1 0x02000002
#define RS232EN_2 0x01000001
#define FETHIEN 0x08000008
@@ -393,7 +391,6 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
/* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */
/* 0x0EB2B645 */
#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\
@@ -450,13 +447,11 @@
# define CFG_ENV_SIZE 0x200
#endif /* CFG_RAMBOOT */
-
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-
/*-----------------------------------------------------------------------
* HIDx - Hardware Implementation-dependent Registers 2-11
*-----------------------------------------------------------------------
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 7e1005c..81db96f 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -265,7 +265,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
@@ -341,26 +341,34 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_DHCP \
- | CFG_CMD_I2C \
- | CFG_CMD_MII \
- | CFG_CMD_DATE \
- | CFG_CMD_PCI)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_CMDLINE_EDITING 1
-#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \
- ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
#if defined(CFG_RAMBOOT)
-#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS
-#else
-#define CONFIG_COMMANDS CFG_BASE_COMMANDS
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
+#define CONFIG_CMDLINE_EDITING 1
+
/*
* Miscellaneous configurable options
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
new file mode 100644
index 0000000..376973b
--- /dev/null
+++ b/include/configs/MPC8323ERDB.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_QE 1 /* Has QE */
+#define CONFIG_MPC83XX 1 /* MPC83xx family */
+#define CONFIG_MPC832X 1 /* MPC832x CPU specific */
+
+#define CONFIG_PCI 1
+#define CONFIG_83XX_GENERIC_PCI 1
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CSB_TO_CLKIN_2X1 |\
+ HRCWL_CORE_TO_CSB_2_5X1 |\
+ HRCWL_CE_PLL_VCO_DIV_2 |\
+ HRCWL_CE_PLL_DIV_1X1 |\
+ HRCWL_CE_TO_PLL_1X3)
+
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LALE_NORMAL)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRL 0x00000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */
+
+#undef CONFIG_SPD_EEPROM
+#if defined(CONFIG_SPD_EEPROM)
+/* Determine DDR configuration from I2C interface
+ */
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */
+#else
+/* Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 64 /* MB */
+#define CFG_DDR_CS0_CONFIG 0x80840101
+#define CFG_DDR_TIMING_0 0x00220802
+#define CFG_DDR_TIMING_1 0x3935d322
+#define CFG_DDR_TIMING_2 0x0f9048ca
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_CLK_CNTL 0x02000000
+#define CFG_DDR_MODE 0x44400232
+#define CFG_DDR_MODE2 0x8000c000
+#define CFG_DDR_INTERVAL 0x03200064
+#define CFG_DDR_CS0_BNDS 0x00000003
+#define CFG_DDR_SDRAM_CFG 0x43080000
+#define CFG_DDR_SDRAM_CFG2 0x00401000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00030000 /* memtest region */
+#define CFG_MEMTEST_END 0x03f00000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * SDRAM on the Local Bus
+ */
+#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON 0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,8323@0"
+#define OF_SOC "soc8323@e0000000"
+#define OF_QE "qe@e0100000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MMIO_BASE 0x90000000
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0xd0000000
+#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+#endif /* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME "Freescale GETH"
+
+#define CONFIG_UEC_ETH1 /* ETH3 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM 2 /* UCC3 */
+#define CFG_UEC1_RX_CLK QE_CLK9
+#define CFG_UEC1_TX_CLK QE_CLK10
+#define CFG_UEC1_ETH_TYPE FAST_ETH
+#define CFG_UEC1_PHY_ADDR 4
+#define CFG_UEC1_INTERFACE_MODE ENET_100_MII
+#endif
+
+#define CONFIG_UEC_ETH2 /* ETH4 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
+#define CFG_UEC2_RX_CLK QE_CLK16
+#define CFG_UEC2_TX_CLK QE_CLK3
+#define CFG_UEC2_ETH_TYPE FAST_ETH
+#define CFG_UEC2_PHY_ADDR 0
+#define CFG_UEC2_INTERFACE_MODE ENET_100_MII
+#endif
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 16384
+#define CFG_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U CFG_IBAT2U
+
+#define CFG_IBAT3L (0)
+#define CFG_IBAT3U (0)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#else
+#define CFG_IBAT5L (0)
+#define CFG_IBAT5U (0)
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#endif
+
+/* Nothing in BAT7 */
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ETHADDR 00:04:9f:ef:03:01
+#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
+#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
+
+#define CONFIG_IPADDR 10.0.0.2
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_NETDEV eth1
+
+#define CONFIG_HOSTNAME mpc8323erdb
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE mpc832x_rdb.dtb
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftp $loadaddr $uboot;" \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \
+ "console=ttyS0\0" \
+ "setbootargs=setenv bootargs " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+ "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv rootdev /dev/nfs;" \
+ "run setbootargs;" \
+ "run setipargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv rootdev /dev/ram;" \
+ "run setbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index cecb225..f62ca2c4 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -423,41 +423,33 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#endif
-#else
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C )
+ #define CONFIG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -468,7 +460,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -498,7 +490,7 @@
*/
#define CFG_DCACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
#endif
@@ -575,7 +567,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 20c6d5a..1567fcf 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -475,44 +475,35 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C \
- | CFG_CMD_DATE) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_DATE) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#endif
-#else
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_DATE \
- )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII \
- | CFG_CMD_DATE \
- )
+ #define CONFIG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -523,7 +514,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -544,7 +535,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -695,7 +686,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 834934d..44649d0 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -289,6 +289,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_CONSOLE ttyS0
#define CONFIG_BAUDRATE 115200
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
@@ -372,7 +373,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_NET_MULTI
#define CONFIG_MII
-#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */
+#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */
#define CONFIG_TSEC1
@@ -408,6 +409,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH /* Flash is not usable now */
+ #undef CFG_FLASH_CFI_DRIVER
#define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
#define CFG_ENV_SIZE 0x2000
@@ -416,40 +418,41 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
-/* CONFIG_COMMANDS */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
#ifdef CONFIG_COMPACT_FLASH
-#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT)
-#else
-#define CONFIG_COMMANDS_CF 0
+ #define CONFIG_CMD_IDE
+ #define CONFIG_CMD_FAT
#endif
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS_PCI CFG_CMD_PCI
-#else
-#define CONFIG_COMMANDS_PCI 0
+ #define CONFIG_CMD_PCI
#endif
#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS_I2C 0
+ #define CONFIG_CMD_I2C
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CONFIG_COMMANDS_CF | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CONFIG_COMMANDS_I2C | \
- CONFIG_COMMANDS_PCI | \
- CFG_CMD_SDRAM | \
- CFG_CMD_DATE | \
- CFG_CMD_CACHE | \
- CFG_CMD_IRQ)
-#include <cmd_confdefs.h>
-
/* Watchdog */
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
@@ -469,7 +472,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -492,7 +495,7 @@ boards, we say we have two, but don't display a message if we find only one. */
*/
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */
#endif
@@ -617,7 +620,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -670,9 +673,10 @@ boards, we say we have two, but don't display a message if we find only one. */
" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
- " console=ttyS0," MK_STR(CONFIG_BAUDRATE)
+ " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=" MK_STR(CONFIG_CONSOLE) "\0" \
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 79937dc..4b32a14 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -457,41 +457,33 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#endif
-#else
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_ASKENV \
- | CFG_CMD_I2C )
+ #define CONFIG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -502,7 +494,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -532,7 +524,7 @@
*/
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
#endif
@@ -610,7 +602,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 9176be3..5a7c879 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -407,37 +407,33 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -448,7 +444,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -469,7 +465,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -481,7 +477,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -520,7 +516,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
- "ramdiskaddr=600000\0" \
+ "ramdiskaddr=1000000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
"fdtaddr=400000\0" \
"fdtfile=your.fdt.dtb\0"
@@ -540,7 +536,7 @@
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
"tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr"
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index b568cb4..0ce25cf 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -259,26 +259,33 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
- | CFG_CMD_PCI | CFG_CMD_I2C ) & \
- ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
- | CFG_CMD_I2C ) & \
- ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#endif
-#else
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \
- | CFG_CMD_PING | CFG_CMD_I2C )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+ #define CONFIG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -288,7 +295,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -308,7 +315,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -320,7 +327,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index e047e25..232f171 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x100000 /* 1M */
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
@@ -401,19 +408,28 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
+ #define CONFIG_CMD_PCI
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -423,7 +439,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -443,7 +459,7 @@ extern unsigned long get_clock_freq(void);
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -455,7 +471,7 @@ extern unsigned long get_clock_freq(void);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 7cd62e9..32934e1 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -34,14 +34,14 @@
#define CONFIG_MPC8544 1
#define CONFIG_MPC8544DS 1
-#undef CONFIG_PCI /* Enable PCI/PCIE */
-#undef CONFIG_PCI1 /* PCI controller 1 */
-#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
-#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
-#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCI controller 1 */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_DLL
@@ -52,6 +52,7 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_DDR_ECC_CMD
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
@@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CFG_ALT_MEMTEST
-#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -344,7 +345,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif /* SCSCI */
@@ -354,7 +355,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -365,6 +366,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_TSEC3_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */
+#define CONFIG_SGMII_RISER
+#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */
+
#define TSEC1_PHY_ADDR 0
#define TSEC3_PHY_ADDR 1
@@ -374,7 +379,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_ETHPRIME "eTSEC1"
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
#endif /* CONFIG_TSEC_ENET */
/*
@@ -392,21 +396,32 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII \
- | CFG_CMD_BEDBUG \
- | CFG_CMD_NET)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
+ #define CONFIG_CMD_PCI
+ #define CONFIG_CMD_BEDBUG
+ #define CONFIG_CMD_NET
+ #define CONFIG_CMD_SCSI
+ #define CONFIG_CMD_EXT2
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -416,7 +431,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -431,12 +446,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
+#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -448,7 +463,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -472,7 +487,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_HOSTNAME 8544ds_unknown
#define CONFIG_ROOTPATH /nfs/mpc85xx
-#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot
+#define CONFIG_BOOTFILE 8544ds/uImage.uboot
+#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_GATEWAYIP 192.168.0.1
@@ -481,7 +497,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
@@ -489,10 +505,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PCIE_ENV \
"pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie2regs=setenv a e0009; run pciereg\0" \
- "pcie3regs=setenv a e000b; run pciereg\0" \
- "pcieerr=md ${a}020 1; md ${a}e00;" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e;" \
"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1;" \
"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
@@ -501,12 +514,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
"pci w $b.0 130 ffffffff\0" \
"pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1err=setenv a e000a; run pcieerr\0" \
- "pcie2err=setenv a e0009; run pcieerr\0" \
- "pcie3err=setenv a e000b; run pcieerr\0" \
- "pcie1errc=setenv a e000a; run pcieerrc\0" \
- "pcie2errc=setenv a e0009; run pcieerrc\0" \
- "pcie3errc=setenv a e000b; run pcieerrc\0"
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcie3regs=setenv a e000b; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie2cfg=setenv b 5; run pciecfg\0" \
+ "pcie3cfg=setenv b 0; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \
+ "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \
+ "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
#else
#define PCIE_ENV ""
#endif
@@ -514,14 +533,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI1)
#define PCI_ENV \
"pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
+ "echo e;md ${a}e00 9\0" \
"pci1regs=setenv a e0008; run pcireg\0" \
"pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
- "pci w.w $b.0 56 ffff\0" \
- "pci1err=setenv a e0008; run pcierr\0" \
- "pci1errc=setenv a e0008; run pcierrc\0"
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
#else
#define PCI_ENV ""
#endif
@@ -541,25 +560,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define ENET_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
- "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
+ "ramdiskfile=8544ds/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8544ds/mpc8544ds.dtb\0" \
+ "bdev=sda3\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
"ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
"gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
"ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- PCIE_ENV \
- PCI_ENV \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
ENET_ENV
@@ -569,23 +602,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
-#define CONFIG_RAMBOOTCOMMAND \
+#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/sda3 rw " \
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/$bdev rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index a0d291e..cda9fd5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -11,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -36,8 +36,14 @@
#define CONFIG_MPC8548 1 /* MPC8548 specific */
#define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */
-#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI /* enable any pci type devices */
+#define CONFIG_PCI1 /* PCI controller 1 */
+#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -46,6 +52,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
@@ -65,16 +72,16 @@ extern unsigned long get_clock_freq(void);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
/*
* Only possible on E500 Version 2 or newer cores.
*/
#define CONFIG_ENABLE_36BIT_PHYS 1
-
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* memory test, takes time */
@@ -85,10 +92,14 @@ extern unsigned long get_clock_freq(void);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+
/*
* DDR Setup
*/
@@ -106,7 +117,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_CLOCKS_IN_MHZ
-
/*
* Local Bus Definitions
*/
@@ -124,9 +134,9 @@ extern unsigned long get_clock_freq(void);
* Use GPCM = BRx[24:26] = 000
* Valid = BRx[31] = 1
*
- * 0 4 8 12 16 20 24 28
- * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
- * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
*
* OR0, OR1:
* Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
@@ -137,11 +147,12 @@ extern unsigned long get_clock_freq(void);
* TRLX = use relaxed timing = ORx[29] = 1
* EAD = use external address latch delay = OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
- * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
*/
-#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */
+#define CFG_BOOT_BLOCK 0xff000000 /* boot TLB block */
+#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
#define CFG_BR0_PRELIM 0xff801001
#define CFG_BR1_PRELIM 0xff001001
@@ -156,7 +167,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -166,7 +177,12 @@ extern unsigned long get_clock_freq(void);
/*
* SDRAM on the Local Bus
*/
-#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
+#define CFG_LBC_CACHE_SIZE 64
+#define CFG_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */
+#define CFG_LBC_NONCACHE_SIZE 64
+
+#define CFG_LBC_SDRAM_BASE CFG_LBC_CACHE_BASE /* Localbus SDRAM */
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
/*
@@ -180,14 +196,14 @@ extern unsigned long get_clock_freq(void);
* SDRAM for MSEL = BR2[24:26] = 011
* Valid = BR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
*
* FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
* FIXME: the top 17 bits of BR2.
*/
-#define CFG_BR2_PRELIM 0xf0001861
+#define CFG_BR2_PRELIM 0xf0001861
/*
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
@@ -196,19 +212,19 @@ extern unsigned long get_clock_freq(void);
* 64MB mask for AM, OR2[0:7] = 1111 1100
* XAM, OR2[17:18] = 11
* 9 columns OR2[19-21] = 010
- * 13 rows OR2[23-25] = 100
+ * 13 rows OR2[23-25] = 100
* EAD set for extra time OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
*/
#define CFG_OR2_PRELIM 0xfc006901
-#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
-#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
-#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
/*
* LSDMR masks
@@ -236,7 +252,7 @@ extern unsigned long get_clock_freq(void);
/*
* Common settings for all Local Bus SDRAM commands.
* At run time, either BSMA1516 (for CPU 1.1)
- * or BSMA1617 (for CPU 1.0) (old)
+ * or BSMA1617 (for CPU 1.0) (old)
* is OR'ed in too.
*/
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
@@ -256,61 +272,63 @@ extern unsigned long get_clock_freq(void);
* Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
* port-size = 8-bits = BR[19:20] = 01
* no parity checking = BR[21:22] = 00
- * GPMC for MSEL = BR[24:26] = 000
- * Valid = BR[31] = 1
+ * GPMC for MSEL = BR[24:26] = 000
+ * Valid = BR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
*
* For OR3, need:
- * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
+ * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
* disable buffer ctrl OR[19] = 0
- * CSNT OR[20] = 1
- * ACS OR[21:22] = 11
- * XACS OR[23] = 1
+ * CSNT OR[20] = 1
+ * ACS OR[21:22] = 11
+ * XACS OR[23] = 1
* SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
- * SETA OR[28] = 0
- * TRLX OR[29] = 1
- * EHTR OR[30] = 1
- * EAD extra time OR[31] = 1
+ * SETA OR[28] = 0
+ * TRLX OR[29] = 1
+ * EHTR OR[30] = 1
+ * EAD extra time OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
*/
#define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM 0xf8000801
-#define CFG_OR3_PRELIM 0xfff00ff7
+#define CFG_BR3_PRELIM 0xf8000801
+#define CFG_OR3_PRELIM 0xfff00ff7
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#define CONFIG_CONS_INDEX 2
+#define CONFIG_CONS_INDEX 2
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
-#define CFG_BAUDRATE_TABLE \
+#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
@@ -331,55 +349,74 @@ extern unsigned long get_clock_freq(void);
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
+#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
+
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
-#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
-#define CFG_PCI2_MEM_BASE 0x90000000
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI2_IO_BASE 0x00000000
#define CFG_PCI2_IO_PHYS 0xe2800000
-#define CFG_PCI2_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#endif
-#define CFG_PEX_MEM_BASE 0xa0000000
-#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PEX_IO_BASE 0x00000000
-#define CFG_PEX_IO_PHYS 0xe3000000
-#define CFG_PEX_IO_SIZE 0x01000000 /* 16M */
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe3000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+#endif
+#ifdef CONFIG_RIO
/*
* RapidIO MMU
*/
#define CFG_RIO_MEM_BASE 0xC0000000
#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_85XX_PCI2
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
#endif /* CONFIG_PCI */
@@ -387,7 +424,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -397,7 +434,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_TSEC2_NAME "eTSEC1"
#define CONFIG_TSEC3 1
#define CONFIG_TSEC3_NAME "eTSEC2"
-#undef CONFIG_TSEC4
+#define CONFIG_TSEC4
#define CONFIG_TSEC4_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
@@ -413,7 +450,7 @@ extern unsigned long get_clock_freq(void);
/* Options are: eTSEC[0-3] */
#define CONFIG_ETHPRIME "eTSEC0"
-
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#endif /* CONFIG_TSEC_ENET */
/*
@@ -427,19 +464,28 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
+ #define CONFIG_CMD_PCI
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -449,7 +495,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -464,12 +510,12 @@ extern unsigned long get_clock_freq(void);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -481,7 +527,7 @@ extern unsigned long get_clock_freq(void);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -492,58 +538,156 @@ extern unsigned long get_clock_freq(void);
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
-#define CONFIG_IPADDR 192.168.1.253
+#define CONFIG_IPADDR 192.168.1.253
-#define CONFIG_HOSTNAME unknown
-#define CONFIG_ROOTPATH /nfsroot
-#define CONFIG_BOOTFILE your.uImage
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE 8548cds/uImage.uboot
+#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */
-#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
+#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
-#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS1\0" \
- "ramdiskaddr=600000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=your.fdt.dtb\0"
+#if defined(CONFIG_PCIE1)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
+ "pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
+ "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
+#else
+#define PCIE_ENV ""
+#endif
+#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+ "echo e;md ${a}e00 9\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
+#else
+#define PCI_ENV ""
+#endif
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
+#if defined(CONFIG_PCI1)
+#define PCI_ENV1 \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
+#else
+#define PCI_ENV1 ""
+#endif
+
+#if defined(CONFIG_PCI2)
+#define PCI_ENV2 \
+ "pci2regs=setenv a e0009; run pcireg\0" \
+ "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \
+ "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
+#else
+#define PCI_ENV2 ""
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+#define ENET_ENV \
+ "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
+ "md ${a}098 2\0" \
+ "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
+ "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
+ "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
+ "echo mib;md ${a}680 31\0" \
+ "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
+ "enet1regs=setenv a e0024; run enetreg\0" \
+ "enet2regs=setenv a e0025; run enetreg\0" \
+ "enet3regs=setenv a e0026; run enetreg\0" \
+ "enet4regs=setenv a e0027; run enetreg\0"
+#else
+#define ENET_ENV ""
+#endif
+
+#if 0
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "consoledev=ttyS1\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=mpc8548cds.dtb\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
+ "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
+ PCI_ENV1 \
+ PCI_ENV2 \
+ ENET_ENV
+#endif
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "bootm $loadaddr $ramdiskaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index b7e703c..e8fe99a 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
@@ -401,19 +408,28 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
+ #define CONFIG_CMD_PCI
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -423,7 +439,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -443,7 +459,7 @@ extern unsigned long get_clock_freq(void);
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -455,7 +471,7 @@ extern unsigned long get_clock_freq(void);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 043397f..c10e551 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,9 +43,7 @@
#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#undef CONFIG_TSEC_ENET /* tsec ethernet support */
-#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
-#define CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -349,13 +347,15 @@
#endif /* CONFIG_PCI */
-#if defined(CONFIG_TSEC_ENET)
+#ifdef CONFIG_TSEC_ENET
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
+#ifndef CONFIG_MII
#define CONFIG_MII 1 /* MII PHY management */
+#endif
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_TSEC2 1
@@ -369,9 +369,10 @@
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "TSEC0"
-#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
+#endif /* CONFIG_TSEC_ENET */
+
+#ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
@@ -392,7 +393,10 @@
#define FETH3_RST 0x80
#endif /* CONFIG_ETHER_INDEX */
-#define CONFIG_MII /* MII PHY management */
+#ifndef CONFIG_MII
+#define CONFIG_MII 1 /* MII PHY management */
+#endif
+
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
/*
@@ -432,46 +436,36 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_MII
+#endif
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & ~(CFG_CMD_ENV))
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & ~(CFG_CMD_ENV))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -482,7 +476,7 @@
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -503,7 +497,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -515,7 +509,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -553,9 +547,11 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=400000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0"
+ "consoledev=ttyCPM\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8560ads.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
@@ -563,14 +559,16 @@
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "bootm $loadaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "bootm $loadaddr $ramdiskaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 0ff0416..dc9cb1f 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -28,20 +28,21 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
#define CONFIG_MPC8568 1 /* MPC8568 specific */
#define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */
-#undef CONFIG_PCI
+#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#undef CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
/*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */
/*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */
-/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
@@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void);
#define OF_CPU "PowerPC,8568@0"
#define OF_SOC "soc8568@e0000000"
+#define OF_QE "qe@e0080000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600"
@@ -306,11 +308,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR 0x52
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
/*
* General PCI
@@ -318,7 +323,7 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
@@ -337,6 +342,44 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#ifdef CONFIG_QE
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#ifndef CONFIG_TSEC_ENET
+#define CONFIG_ETHPRIME "Freescale GETH"
+#endif
+#define CONFIG_PHY_MODE_NEED_CHANGE
+#define CONFIG_eTSEC_MDIO_BUS
+
+#ifdef CONFIG_eTSEC_MDIO_BUS
+#define CONFIG_MIIM_ADDRESS 0xE0024520
+#endif
+
+#define CONFIG_UEC_ETH1 /* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM 0 /* UCC1 */
+#define CFG_UEC1_RX_CLK QE_CLK_NONE
+#define CFG_UEC1_TX_CLK QE_CLK16
+#define CFG_UEC1_ETH_TYPE GIGA_ETH
+#define CFG_UEC1_PHY_ADDR 7
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2 /* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
+#define CFG_UEC2_RX_CLK QE_CLK_NONE
+#define CFG_UEC2_TX_CLK QE_CLK16
+#define CFG_UEC2_ETH_TYPE GIGA_ETH
+#define CFG_UEC2_PHY_ADDR 1
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+#endif /* CONFIG_QE */
+
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -345,13 +388,12 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
+#if defined(CONFIG_TSEC_ENET)
+
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC0"
@@ -383,19 +425,29 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
+ #define CONFIG_CMD_PCI
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -405,7 +457,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_LONGHELP /* undef to save memory */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -425,7 +477,7 @@ extern unsigned long get_clock_freq(void);
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -437,7 +489,7 @@ extern unsigned long get_clock_freq(void);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -447,12 +499,15 @@ extern unsigned long get_clock_freq(void);
*/
/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.253
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 12af24f..64dcbd0 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -46,8 +46,10 @@
#define CFG_RESET_ADDRESS 0xfff00100
-/*#undef CONFIG_PCI*/
-#define CONFIG_PCI
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
+#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -76,6 +78,9 @@
#define L2_ENABLE (L2CR_L2E)
#ifndef CONFIG_SYS_CLK_FREQ
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
@@ -93,6 +98,9 @@
#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+
/*
* DDR Setup
*/
@@ -232,7 +240,7 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -296,9 +304,9 @@
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS 0x00000000
@@ -311,10 +319,10 @@
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
@@ -330,12 +338,43 @@
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_USB_KEYBOARD 1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL 1
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET CFG_PCI2_IO_PHYS
+
+/*PCI video card used*/
+/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_CONSOLE_CURSOR*/
+#define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS
+#endif
+
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_DOS_PARTITION
@@ -349,6 +388,8 @@
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif
+#define CONFIG_MPC86XX_PCI2
+
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
@@ -396,20 +437,20 @@
* 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
-#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U CFG_DBAT1U
/*
* BAT2 512M Cache-inhibited, guarded
* 0xc000_0000 512M RapidIO Memory
*/
-#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U CFG_DBAT2U
/*
@@ -428,10 +469,10 @@
* 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
-#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U CFG_DBAT4U
/*
@@ -463,8 +504,8 @@
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000)
+ #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
@@ -475,39 +516,34 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C \
- | CFG_CMD_SCSI \
- | CFG_CMD_EXT2) \
- & \
- ~(CFG_CMD_ENV))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_SCSI \
- | CFG_CMD_EXT2)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+#endif
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+ #define CONFIG_CMD_SCSI
+ #define CONFIG_CMD_EXT2
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -518,7 +554,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -539,8 +575,8 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
/*
@@ -551,9 +587,9 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#if defined(CONFIG_CMD_KGDB)
+ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index da52e0e..f8cf01e 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -52,11 +52,20 @@
#define CONFIG_BOOTDELAY 5
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
/*
@@ -280,7 +289,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 88eefa1..0defafe 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -76,15 +76,44 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 60
-#define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \
- CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \
- CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN )
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_RUN
-#define CONFIG_BOOTP_MASK ( 0xffffffff )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_TIMEOFFSET
+
/*
* Miscellaneous configurable options
@@ -310,7 +339,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
index 5995918..75efd1e 100644
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -63,27 +63,36 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_VENDOREX )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_VENDOREX
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-/* MVsensor uses a really minimal U-Boot ! */
-#define CONFIG_COMMANDS (CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_DHCP | \
- CFG_CMD_ENV | \
- CFG_CMD_BOOTD | \
- CFG_CMD_RUN )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_RUN
+
/*
* Miscellaneous configurable options
@@ -96,7 +105,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -172,7 +181,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index a12c8da..c051a35 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -85,7 +85,15 @@
#undef CONFIG_STATUS_LED /* Status LED disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
#define FEC_ENET
@@ -134,25 +142,28 @@
#define CONFIG_RTC_PCF8563
#define CFG_I2C_RTC_ADDR 0x51
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_NAND | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -230,7 +241,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 444f721..bb3d19d 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -82,7 +82,15 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
@@ -105,20 +113,22 @@
#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_NAND | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_MII | \
- CFG_CMD_CDP \
- )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_CDP
+
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -128,7 +138,7 @@
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -220,7 +230,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 25b6345..19743c0 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -77,7 +77,16 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
@@ -111,26 +120,28 @@
CFG_POST_CODEC | \
CFG_POST_DSP )
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_CDP | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_FAT | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_PING | \
- 0)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -140,7 +151,7 @@
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -223,7 +234,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index e20e724..fb8085d 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -82,7 +82,16 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
@@ -105,20 +114,22 @@
#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_NAND | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_MII | \
- CFG_CMD_CDP \
- )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_CDP
+
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -128,7 +139,7 @@
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -220,7 +231,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index e30be09..d4cb9e7 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -81,35 +81,45 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS_BASE ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
-#define CONFIG_COMMANDS (CONFIG_COMMANDS_BASE | CFG_CMD_NAND)
-#else
-#define CONFIG_COMMANDS CONFIG_COMMANDS_BASE
+#define CONFIG_CMD_NAND
#endif
+
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -192,7 +202,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index d994420..4cd4472 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -84,7 +84,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -93,16 +101,19 @@
#define CONFIG_ISP1362_USB /* ISP1362 USB OTG controller */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -117,7 +128,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -201,7 +212,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 1cb8b8f..524aa06 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -55,22 +55,35 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#undef CONFIG_WATCHDOG /* watchdog disabled, for now */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_AUTOSCRIPT)
#define CONFIG_AUTOSCRIPT
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_AUTOSCRIPT
+
+
/* call various generic functions */
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -152,7 +165,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index aa9d1ba..5840ea2 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -54,20 +54,32 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -77,7 +89,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -215,7 +227,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 2e7c505..937df22 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -54,20 +54,32 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@@ -77,7 +89,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -213,7 +225,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 787407c..8d61bcd 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -51,10 +51,23 @@
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+
/*
* Miscellaneous configurable options
@@ -299,7 +312,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index a933e1b..ef970f1 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -120,30 +120,40 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_UNIVERSE| \
- CFG_CMD_BSP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UNIVERSE
+#define CONFIG_CMD_BSP
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -396,7 +406,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index d88fff3..0de7591 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -39,14 +39,35 @@
#define CONFIG_BAUDRATE 9600
-#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \
- CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV | CFG_CMD_REGINFO | \
- CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP | \
- CFG_CMD_IMI | CFG_CMD_EEPROM | CFG_CMD_IRQ | CFG_CMD_MISC \
-)
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MISC
+
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -71,7 +92,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "pati=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 027dd22..d6e7082 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -68,17 +68,29 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -97,7 +109,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -244,7 +256,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 3a7f7f0..24b25d9 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -122,22 +122,32 @@
#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_RUN | \
- CFG_CMD_SAVES )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
/*------------------------------------------------------------------------
* MISC
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 3a97fbc..268b034 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -53,30 +53,37 @@
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
#define CFG_NAND_LEGACY
/*
@@ -223,7 +230,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index 130beb7..250b586 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -53,32 +53,39 @@
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SCSI | \
- CFG_CMD_SNTP )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_SNTP
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
#define CFG_NAND_LEGACY
/*
@@ -225,7 +232,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 806e95f..efa0157 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -40,33 +40,42 @@
***********************************************************/
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-/***********************************************************
- * Command definitions
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_IDE | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_CACHE | \
- CFG_CMD_IRQ | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_REGINFO | \
- CFG_CMD_FDC | \
- CFG_CMD_SCSI | \
- CFG_CMD_FAT | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF | \
- CFG_CMD_USB | \
- CFG_CMD_MII | \
- CFG_CMD_SDRAM | \
- CFG_CMD_DOC | \
- CFG_CMD_PING | \
- CFG_CMD_SAVES | \
- CFG_CMD_BSP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_BSP
+
#define CFG_NAND_LEGACY
@@ -150,7 +159,7 @@
**********************************************************/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -227,7 +236,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -366,7 +375,7 @@
/************************************************************
* Debug support
************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 83a7ec2..d90351a 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -160,30 +160,41 @@
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_SAVES )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
/*------------------------------------------------------------------------
* COMPACT FLASH
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
#define CONFIG_IDE_PREINIT /* Implement id_preinit */
#define CFG_IDE_MAXBUS 1 /* 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
@@ -201,12 +212,12 @@
#define CFG_CF_POWER 0x00900890 /* CF Power FET PIO base*/
#define CFG_CF_ATASEL 0x009008a0 /* CF ATASEL PIO base */
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif
/*------------------------------------------------------------------------
* JFFS2
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS_CUSTOM_PART /* board defined part */
#endif
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index ef5ecba..4acbcd5 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -61,19 +61,34 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -82,9 +97,6 @@
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
@@ -103,7 +115,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -292,7 +304,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 7d91a01..5ba8f4a 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -40,11 +40,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -77,12 +72,6 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#undef CONFIG_NS8382X
-#define ADD_PCI_CMD CFG_CMD_PCI
-
-#else /* MPC5100 */
-
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
-
#endif
/* Partitions */
@@ -91,39 +80,48 @@
/* USB */
#if 1
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
#endif
-#if defined(CONFIG_BOOT_ROM)
-#define ADD_DOC_CMD 0
-#else
-#define ADD_DOC_CMD CFG_CMD_DOC
+#if !defined(CONFIG_BOOT_ROM)
/* DoC requires legacy NAND for now */
#define CFG_NAND_LEGACY
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_DOC_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+#if !defined(CONFIG_BOOT_ROM)
+#define CONFIG_CMD_DOC
+#endif
+
+#if defined(CONFIG_MPC5200)
+#define CONFIG_CMD_PCI
+#endif
+
/*
* Autobooting
@@ -294,7 +292,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -310,6 +308,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 88fdb51..c80b153 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -103,8 +103,7 @@
* - CONFIG_NET_MULTI must be defined
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#define CONFIG_NET_MULTI
#undef CONFIG_ETHER_NONE /* define if ether on something else */
@@ -152,33 +151,34 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-#else /* ! PCI */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#endif /* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#endif
+
#define CFG_NAND_LEGACY
@@ -197,7 +197,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -345,7 +345,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 37ee977..8f5be5f 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -103,8 +103,7 @@
* - CONFIG_NET_MULTI must be defined
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#define CONFIG_NET_MULTI
#undef CONFIG_ETHER_NONE /* define if ether on something else */
@@ -152,33 +151,34 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
#ifdef CONFIG_PCI
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-#else /* ! PCI */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#endif /* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#endif
+
/*
* Disk-On-Chip configuration
@@ -196,7 +196,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -338,7 +338,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 8f130f5..dbf9422 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -303,43 +303,36 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_EEPROM \
- | CFG_CMD_DATE \
- | CFG_CMD_MII \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_EEPROM \
- | CFG_CMD_DATE \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -350,7 +343,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -372,7 +365,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -384,7 +377,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 0286b53..6bdfa5d 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -306,41 +306,35 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_EEPROM \
- | CFG_CMD_DATE \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_EEPROM \
- | CFG_CMD_DATE \
- | CFG_CMD_PING \
- | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -351,7 +345,7 @@
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -373,7 +367,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -385,7 +379,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 6e0bd7f..b29f368 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -63,25 +63,37 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_I2C | \
- CFG_CMD_PING | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UNIVERSE
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
@@ -100,7 +112,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -263,7 +275,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index a717659..72acf5a 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -42,15 +42,29 @@
#define CONFIG_CONS_INDEX 1
-#define REMOVE_COMMANDS ( CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_LOADS | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMLS )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_BSP
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
-#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\
- CFG_CMD_PCI |\
- CFG_CMD_BSP)
#define CONFIG_BAUDRATE 19200 /* console baudrate */
@@ -82,10 +96,6 @@
"loadp 200000; bootm"
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-
/*
* Miscellaneous configurable options
*/
@@ -287,7 +297,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 16e2cc6..dd1decd 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -113,26 +113,38 @@
#endif
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_M41T11 1 /* uses a M41T00 RTC */
@@ -162,7 +174,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -446,7 +458,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index 235bc48..3657fea 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -189,27 +189,37 @@
#undef CONFIG_STATUS_LED /* Status LED disabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_DATE | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_RUN)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_RUN
+
/*-----------------------------------------------------------------------
* Environment variable storage is in FLASH, one sector before U-boot
@@ -228,7 +238,7 @@
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -303,7 +313,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index 967582b..3db539f 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -189,27 +189,37 @@
#undef CONFIG_STATUS_LED /* Status LED disabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_DATE | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_RUN)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_RUN
+
/*-----------------------------------------------------------------------
* Environment variable storage is in FLASH, one sector before U-boot
@@ -228,7 +238,7 @@
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -303,7 +313,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 32faa61..b3442de 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -92,23 +92,33 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ASKENV | \
- CFG_CMD_NET | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
/* TODO */
@@ -136,7 +146,7 @@ CONFIG_SPI
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -210,7 +220,7 @@ CONFIG_SPI
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 82228c0..516ec64 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -79,7 +79,14 @@
#define CONFIG_CAN_DRIVER /* CAN Driver support enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -111,20 +118,23 @@
#define CFG_I2C_KEY_ADDR 0x9 /* Keyboard coprocessor */
#define CFG_I2C_TEM_ADDR 0x49 /* Temperature Sensors */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NFS | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -134,7 +144,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -228,7 +238,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 242c837..2f6de81 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -79,7 +79,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#undef CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -94,42 +102,45 @@
#define CFG_EEPROM_WRITE_BITS 4
#define CFG_EEPROM_WRITE_DELAY_MS 10
-#define CONFIG_COMMANDS ( CFG_CMD_ALL & \
- ~CFG_CMD_BSP & \
- ~CFG_CMD_DATE & \
- ~CFG_CMD_DISPLAY& \
- ~CFG_CMD_DTT & \
- ~CFG_CMD_EXT2 & \
- ~CFG_CMD_FDC & \
- ~CFG_CMD_FDOS & \
- ~CFG_CMD_HWFLOW & \
- ~CFG_CMD_IDE & \
- ~CFG_CMD_IRQ & \
- ~CFG_CMD_JFFS2 & \
- ~CFG_CMD_MII & \
- ~CFG_CMD_MMC & \
- ~CFG_CMD_NAND & \
- ~CFG_CMD_PCI & \
- ~CFG_CMD_PCMCIA & \
- ~CFG_CMD_REISER & \
- ~CFG_CMD_SCSI & \
- ~CFG_CMD_SETGETDCR & \
- ~CFG_CMD_SNTP & \
- ~CFG_CMD_SPI & \
- ~CFG_CMD_UNIVERSE & \
- ~CFG_CMD_USB & \
- ~CFG_CMD_VFD & \
- ~CFG_CMD_XIMG )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -205,7 +216,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 591382c..793b1db 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -88,15 +88,26 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-#define CONFIG_COMMANDS ((CFG_CMD_ALL & ~CFG_CMD_NONSTD) | CFG_CMD_ELF)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -104,7 +115,7 @@
#define CFG_RESET_ADDRESS 0x80000000
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -182,7 +193,7 @@
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFF000000
-#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -222,7 +233,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 48ada0e..3c5e6b8 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -62,17 +62,28 @@
#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -154,7 +165,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index 3102547..872765c 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -115,29 +115,36 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
don't want the advanced function */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+
#ifdef CONFIG_SPLASH_SCREEN
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_REGINFO | \
- CFG_CMD_DHCP )
-#else
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_REGINFO | \
- CFG_CMD_DHCP )
-#endif /* CONFIG_SPLASH_SCREEN */
+#define CONFIG_CMD_BMP
+#endif
+
/* test-only */
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
@@ -147,16 +154,13 @@
#endif /* 1 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "u-boot>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -200,7 +204,7 @@
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFF000000
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -239,7 +243,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index 45907aa..dfadd2a 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -91,8 +91,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
@@ -150,13 +149,28 @@
/* Monitor Command Prompt */
#define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ASKENV | \
- CFG_CMD_I2C | \
- CFG_CMD_REGINFO & \
- ~CFG_CMD_KGDB )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_KGDB
+
/* Where do the internal registers live? */
#define CFG_IMMR 0xF0000000
@@ -176,13 +190,10 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -310,7 +321,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 3885bcd..1e6e8c0 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -92,7 +92,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -135,23 +143,26 @@
#endif /* CONFIG_SOFT_I2C */
-#define CONFIG_COMMANDS ( ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_DATE ) & \
- ~( CFG_CMD_PCMCIA | \
- CFG_CMD_IDE ) )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_IDE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -228,7 +239,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index dbc57e8..d7652fa 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -62,8 +62,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
@@ -125,22 +125,33 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_JFFS2 \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -158,7 +169,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -184,7 +195,7 @@
#define CFG_DIRECT_FLASH_TFTP
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_SORT_FRAGMENTS
@@ -205,7 +216,7 @@
#define MTDIDS_DEFAULT "nor0=rattler-0"
#define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)"
*/
-#endif /* CFG_CMD_JFFS2 */
+#endif /* CONFIG_CMD_JFFS2 */
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -256,7 +267,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index f8e3397..f2c3699 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -338,28 +338,37 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_MII
+#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -368,7 +377,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "SBC8540=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -389,7 +398,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -401,7 +410,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index e263db6..f900968 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -133,8 +133,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -191,23 +190,33 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_BSP)
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_BSP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -353,7 +362,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
index 61896d0..4d9d41b 100644
--- a/include/configs/SL8245.h
+++ b/include/configs/SL8245.h
@@ -53,11 +53,22 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
/*
@@ -255,7 +266,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 4977629..41a54f0 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -68,23 +68,34 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) && defined(KGDB_DEBUG)
+#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -167,7 +178,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index d588818..a5d3d69 100755..100644
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -66,7 +66,15 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
@@ -101,21 +109,20 @@
PUT32(IO0DIR, i2ctmp); }
#endif /* CONFIG_SOFT_I2C */
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_MMC | \
- CFG_CMD_NET | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PING)
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PING
-#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_DOS_PARTITION
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index ae4dcc2..395c7a1 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -59,15 +59,29 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_COMMANDS \
-((CONFIG_CMD_DFL & ~(CFG_CMD_FLASH)) | CFG_CMD_IDE) /* no Flash, but IDE */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+
+#undef CONFIG_CMD_FLASH
+
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*----------------------------------------------------------------------*/
#define CONFIG_ETHADDR 00:D0:93:00:01:CB
@@ -82,7 +96,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -160,7 +174,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 6ed98b8..05cef87 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -93,12 +93,26 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \
- CFG_CMD_I2C ) & \
- ~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
+
+
#include <configs/omap1510.h>
#define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw"
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index a8454d9..8f2a5ec 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -146,14 +146,26 @@
#define CFG_DISCOVER_PHY
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+
#define CFG_JFFS2_SORT_FRAGMENTS
@@ -226,7 +238,7 @@
*/
#define CFG_LONGHELP /* undef to save a little memory */
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -309,7 +321,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index f4339ec..5bbe3c5 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -80,18 +80,30 @@
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_SDRAM | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+
#define CONFIG_DRAM_SPEED 100 /* MHz */
@@ -384,7 +396,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index d42bd69..a08451e 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -51,17 +51,28 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
/*
@@ -363,7 +374,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 119bc24..2b2ae01 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -50,20 +50,34 @@
#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C ) & \
- ~(CFG_CMD_NET))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
+
+
#define CONFIG_BOOTDELAY 3
#define CFG_PROMPT "=> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 712668a..1c6a9ae 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -42,11 +42,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -72,12 +67,6 @@
#define CFG_CONSOLE_IS_IN_ENV
#endif
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD 0
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -85,7 +74,6 @@
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/* POST support */
@@ -94,41 +82,51 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
-/* IDE */
-#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
/*
- * Supported commands
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- ADD_IDE_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP | \
- CFG_CMD_BSP)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG__CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -394,7 +392,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -403,6 +401,11 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
@@ -414,8 +417,7 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 1cc9ce9..7240ce1 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -50,11 +50,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -81,12 +76,6 @@
# define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
# define CONFIG_PCI_IO_SIZE 0x01000000
-# define ADD_PCI_CMD CFG_CMD_PCI
-
-#else /* no Evaluation board */
-
-# define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
-
#endif
/* USB */
@@ -99,49 +88,49 @@
# else
# define CONFIG_USB_CONFIG 0x00001000
# endif
-# define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
# define CONFIG_DOS_PARTITION
# define CONFIG_USB_STORAGE
-#else
-
-# define ADD_USB_CMD 0
-
#endif
/* IDE */
#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
-
-# define ADD_IDE_CMD CFG_CMD_IDE | CFG_CMD_FAT
# define CONFIG_DOS_PARTITION
+#endif
-#else
-# define ADD_IDE_CMD 0
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#endif
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- ADD_IDE_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
+
+#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_PCI
+#endif
+
/*
* MUST be low boot - HIGHBOOT is not supported anymore
@@ -336,7 +325,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -352,6 +341,12 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
#ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */
#define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */
#define RTC(reg) (0xf0010000+reg)
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 2344b96..66f7a11 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -107,30 +107,28 @@
*/
#define CFG_MATCH_PARTIAL_CMD
+
/*
- * List of available monitor commands. Use the system default list
- * plus add some of the "non-standard" commands back in.
- * See ./cmd_confdefs.h
- */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG \
- )
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+
#define CONFIG_AUTOSCRIPT 1
#define CFG_LOADS_BAUD_CHANGE 1
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
@@ -141,7 +139,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -239,7 +237,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
@@ -411,10 +409,11 @@
/*
* BOOTP options
*/
-#undef CONFIG_BOOTP_MASK
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE \
- )
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
/*
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index aa3627b..3d98500 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -47,11 +47,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -105,12 +100,6 @@
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
-#ifdef CONFIG_PCI
-#define ADD_PCI_CMD CFG_CMD_PCI
-#else
-#define ADD_PCI_CMD 0
-#endif
-
/*
* Video console
*/
@@ -133,11 +122,6 @@
#define CFG_CONSOLE_IS_IN_ENV
#endif /* #ifndef CONFIG_TQM5200S */
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD 0
-#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
@@ -146,11 +130,17 @@
/* USB */
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
-#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#endif
#ifndef CONFIG_CAM5200
@@ -161,44 +151,61 @@
#endif
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
-/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
-#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
-#else
-#define ADD_IDE_CMD 0
-#endif
/*
- * Supported commands
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- ADD_IDE_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP | \
- CFG_CMD_BSP)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+
+#ifdef CONFIG_VIDEO
+ #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_CMD_PCI
+#endif
+
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+ #define CONFIG_CMD_IDE
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
+#endif
+
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+ #define CONFIG_CFG_USB
+ #define CONFIG_CFG_FAT
+#endif
+
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -566,7 +573,12 @@
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -586,8 +598,7 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 247f705..2bdcf2c 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -88,34 +88,38 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_SPLASH_SCREEN
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#else
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+ #define CONFIG_CMD_BMP
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -129,7 +133,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -212,7 +216,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 1461b5f..58bc5d3 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -88,23 +88,34 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -118,7 +129,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -202,7 +213,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index ffd5c0b..3b78323 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -167,8 +167,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -220,17 +219,28 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -244,7 +254,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -385,7 +395,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 925bf34..50f6752 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -97,10 +97,6 @@
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define ADD_CMD_I2C CFG_CMD_I2C | \
- CFG_CMD_DATE |\
- CFG_CMD_DTT |\
- CFG_CMD_EEPROM
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@@ -140,7 +136,6 @@
#else
#undef CONFIG_HARD_I2C
#undef CONFIG_SOFT_I2C
-#define ADD_CMD_I2C 0
#endif
/*
@@ -177,8 +172,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -272,20 +266,37 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_NAND | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- ADD_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
+#if CONFIG_I2C
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_DTT
+ #define CONFIG_CMD_EEPROM
+#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -301,7 +312,7 @@
#endif
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -392,7 +403,7 @@
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#define CFG_NAND_CS_DIST 0x80
#define CFG_NAND_UPM_WRITE_CMD_OFS 0x20
@@ -430,7 +441,7 @@
WRITE_NAND(d, addr); \
} while(0)
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
#define CONFIG_PCI
#ifdef CONFIG_PCI
@@ -502,7 +513,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 4a5f8b6..661712b 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -28,9 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define DEBUG
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
@@ -281,7 +278,6 @@ extern int tqm834x_num_flash_banks;
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
-
#undef CONFIG_EEPRO100
#define CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -316,38 +312,36 @@ extern int tqm834x_num_flash_banks;
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-/* Common commands */
-#define CFG_CMD_TQM8349_COMMON CFG_CMD_DATE | CFG_CMD_I2C | CFG_CMD_DTT\
- | CFG_CMD_PING | CFG_CMD_EEPROM \
- | CFG_CMD_MII | CFG_CMD_JFFS2
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI \
- | CFG_CMD_TQM8349_COMMON) \
- & \
- ~(CFG_CMD_ENV | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_TQM8349_COMMON) \
- & \
- ~(CFG_CMD_ENV | CFG_CMD_LOADS))
-#endif
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#else /* CFG_RAMBOOT */
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \
- | CFG_CMD_TQM8349_COMMON)
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_TQM8349_COMMON)
+ #define CONFIG_CMD_PCI
#endif
-#endif /* CFG_RAMBOOT */
-
-#include <cmd_confdefs.h>
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
/*
* Miscellaneous configurable options
@@ -362,7 +356,7 @@ extern int tqm834x_num_flash_banks;
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -387,7 +381,7 @@ extern int tqm834x_num_flash_banks;
*/
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -495,7 +489,7 @@ extern int tqm834x_num_flash_banks;
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 90ecbad..74b16c7 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -80,23 +80,33 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -110,7 +120,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -193,7 +203,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index b3f8f8d..e3936c3 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -78,23 +78,33 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -108,7 +118,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -192,7 +202,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 49aaeea..ae22b77 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -83,23 +83,34 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -113,7 +124,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -196,7 +207,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 50df49e..5d54f87 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -116,24 +116,35 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#endif
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -147,7 +158,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -231,7 +242,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b0b9dd3..d5ce3ba 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -357,24 +357,35 @@
#define CONFIG_TIMESTAMP /* Print image info with ts */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_MII
+
#if defined(CONFIG_PCI)
-# define ADD_PCI_CMD (CFG_CMD_PCI)
-#else
-# define ADD_PCI_CMD 0
+ #define CONFIG_CMD_PCI
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- ADD_PCI_CMD | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DTT | \
- CFG_CMD_MII | \
- CFG_CMD_PING )
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -385,7 +396,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -406,7 +417,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
#endif
@@ -418,7 +429,7 @@
#define BOOTFLAG_COLD 0x01 /* Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 9be5db1..40c0940 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -83,26 +83,37 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_NETCONSOLE
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_NETCONSOLE
/*
* Miscellaneous configurable options
@@ -116,7 +127,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -199,7 +210,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 37f6c98..481e3d0 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -83,24 +83,35 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -114,7 +125,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -198,7 +209,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index f03690a..bb3b1cc 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -86,23 +86,34 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -116,7 +127,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -200,7 +211,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 4959340..d687d08 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -86,23 +86,34 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -116,7 +127,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -201,7 +212,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 148490b..ff00c13 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -125,7 +125,15 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -134,16 +142,19 @@
#define CONFIG_TIMESTAMP /* but print image timestmps */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+
/*
* Miscellaneous configurable options
@@ -157,7 +168,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -241,7 +252,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index d470ade..f36b729 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -131,7 +131,15 @@
# define CONFIG_RTC_DS1337 1
# define CFG_I2C_RTC_ADDR 0x68
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -140,19 +148,22 @@
#define CONFIG_TIMESTAMP /* but print image timestmps */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
/*
* Miscellaneous configurable options
@@ -166,7 +177,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -187,8 +198,7 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
- * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
@@ -258,7 +268,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
@@ -478,7 +488,7 @@
#define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */
#define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */
-#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_CMD_MII)
#define CFG_DISCOVER_PHY
#endif
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index d8686dd..9edf790 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -48,11 +48,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -63,7 +58,6 @@
/*
* Video console
*/
-#if 1
#define CONFIG_VIDEO
#define CONFIG_VIDEO_SED13806
#define CONFIG_VIDEO_SED13806_16BPP
@@ -76,10 +70,6 @@
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
-#define ADD_VIDEO_CMD CFG_CMD_BMP
-#else
-#define ADD_VIDEO_CMD 0
-#endif
#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
/*
@@ -105,12 +95,9 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#define ADD_PCI_CMD CFG_CMD_PCI
-
#else /* MGT5100 */
#define CONFIG_MII 1
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
#endif
@@ -119,29 +106,36 @@
#define CONFIG_DOS_PARTITION
/* USB */
-#if 1
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
-#endif
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PING | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_IDE | \
- ADD_VIDEO_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_MPC5200)
+ #define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
#if (TEXT_BASE == 0xFE000000) /* Boot low */
# define CFG_LOWBOOT 1
@@ -303,7 +297,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -319,6 +313,12 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
/*
* Various low-level settings
*/
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 5f48a70..df6894f 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -48,27 +48,33 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- /*CFG_CMD_JFFS2 |*/ \
- /*CFG_CMD_NAND |*/ \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_USB | \
- CFG_CMD_REGINFO | \
- CFG_CMD_FAT | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_BSP)
-
-/* this must be included after the definiton of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
@@ -145,7 +151,7 @@
#define CONFIG_IPADDR 10.0.0.110
#define CONFIG_SERVERIP 10.0.0.1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
@@ -246,7 +252,7 @@
/*-----------------------------------------------------------------------
* NAND flash settings
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#define CFG_NAND_LEGACY
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
@@ -280,6 +286,6 @@
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_MTD_NAND_ECC_JFFS2 1
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index abd1ef4..3880ec7 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -58,28 +58,40 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
@@ -98,7 +110,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -298,7 +310,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index f2f3ea7..5512f4b 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -60,24 +60,33 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -96,7 +105,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -244,7 +253,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 92bade5..1405784 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -95,8 +95,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
#define CONFIG_ETHER_ON_FCC
@@ -138,24 +137,34 @@
#endif
-/* configure commands */
-#define CONFIG_COMMANDS ( CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_BDI | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_ECHO | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_IMLS | \
- CFG_CMD_LOADB | \
- CFG_CMD_MEMORY | \
- CFG_CMD_MISC | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_RUN )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IMLS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
/*
* boot options & environment
@@ -206,7 +215,7 @@
#define CFG_PROMPT "=> "
/* console i/o buffer size */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024
#else
#define CFG_CBSIZE 256
@@ -305,7 +314,7 @@
/* cache configuration */
#define CFG_CACHELINE_SIZE 32 /* for MPC8260 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */
#endif
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 8dc623e..fc177fb 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -70,13 +70,31 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \
- CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */
@@ -92,7 +110,7 @@
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -277,7 +295,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
#endif
@@ -309,7 +327,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 2bd98b3..20d693f 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -75,14 +75,34 @@
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \
- CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO | \
- CFG_CMD_DTT)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DTT
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */
@@ -98,7 +118,7 @@
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -278,7 +298,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
#endif
@@ -310,7 +330,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 52bff40..656784a 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -60,19 +60,31 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -92,7 +104,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -248,7 +260,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index f2ad097..611f5a6 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -182,25 +182,33 @@ extern void out32(unsigned int, unsigned long);
#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_DIAG | \
- CFG_CMD_FAT )
-
-/* CFG_CMD_DHCP | \ */
-/* CFG_CMD_KGDB | \ */
-
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -209,7 +217,7 @@ extern void out32(unsigned int, unsigned long);
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -254,7 +262,7 @@ extern void out32(unsigned int, unsigned long);
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 440GX CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -266,7 +274,7 @@ extern void out32(unsigned int, unsigned long);
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 37ef105..00c4ff0 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -39,12 +39,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -70,31 +64,40 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#define CONFIG_NET_MULTI
#define CONFIG_MII
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Autobooting
*/
@@ -293,7 +296,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -309,6 +312,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index a5085cf..7c1a5b9 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -55,8 +55,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
@@ -106,22 +106,33 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -139,7 +150,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -223,7 +234,7 @@
#endif
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -248,18 +259,18 @@
#define CFG_LSRT 0x0F
#define CFG_MPTPR 0x4000
-#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041
+#define CFG_PSDRAM_BR (CFG_SDRAM_BASE | 0x00000041)
#define CFG_PSDRAM_OR 0xFC0028C0
-#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861
+#define CFG_LSDRAM_BR (CFG_LSDRAM_BASE | 0x00001861)
#define CFG_LSDRAM_OR 0xFF803480
-#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00000801)
#define CFG_OR0_PRELIM 0xFFE00856
-#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801
+#define CFG_BR5_PRELIM (CFG_EEPROM | 0x00000801)
#define CFG_OR5_PRELIM 0xFFFF03F6
-#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801
+#define CFG_BR6_PRELIM (CFG_FLSIMM_BASE | 0x00001801)
#define CFG_OR6_PRELIM 0xFF000856
-#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801
+#define CFG_BR7_PRELIM (CFG_BCSR | 0x00000801)
#define CFG_OR7_PRELIM 0xFFFF83F6
#define CFG_RESET_ADDRESS 0xC0000000
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index f163d00..5ba8d1a 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -101,17 +101,29 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MII /* enable MII commands */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_DATE)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
/*
* JFFS2 partitions
@@ -131,15 +143,12 @@
#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -349,7 +358,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 517d130..e3f6e2c 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -123,10 +123,8 @@
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define _CFG_CMD_INCLUDE (CFG_CMD_ALL)
#else
#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */
-#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS))
#endif
#ifdef CFG_ENV_IS_IN_FLASH
@@ -301,27 +299,45 @@
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DTT | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+/*
+ * No NOR on Acadia when NAND-booting
+ */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -330,7 +346,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -373,7 +389,7 @@
*/
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
#endif
@@ -489,7 +505,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
new file mode 100644
index 0000000..22eac1b
--- /dev/null
+++ b/include/configs/ads5121.h
@@ -0,0 +1,401 @@
+/*
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * ADS5121 board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#undef DEBUG
+
+/*
+ * Memory map for the ADS5121 board:
+ *
+ * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB)
+ * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB)
+ * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB)
+ * 0x8200_0000 - 0x8200_001F CPLD (32 B)
+ * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB)
+ */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 Family */
+#define CONFIG_MPC512X 1 /* MPC512X family */
+
+#undef CONFIG_PCI
+
+#define CFG_MPC512X_CLKIN 66000000 /* in Hz */
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
+
+#define CFG_IMMR 0x80000000
+
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * DDR Setup - manually set all parameters as there's no SPD etc.
+ */
+#define CFG_DDR_SIZE 256 /* MB */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+
+/* DDR Controller Configuration
+ *
+ * SYS_CFG:
+ * [31:31] MDDRC Soft Reset: Diabled
+ * [30:30] DRAM CKE pin: Enabled
+ * [29:29] DRAM CLK: Enabled
+ * [28:28] Command Mode: Enabled (For initialization only)
+ * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10]
+ * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10]
+ * [20:19] Read Test: DON'T USE
+ * [18:18] Self Refresh: Enabled
+ * [17:17] 16bit Mode: Disabled
+ * [16:13] Ready Delay: 2
+ * [12:12] Half DQS Delay: Disabled
+ * [11:11] Quarter DQS Delay: Disabled
+ * [10:08] Write Delay: 2
+ * [07:07] Early ODT: Disabled
+ * [06:06] On DIE Termination: Disabled
+ * [05:05] FIFO Overflow Clear: DON'T USE here
+ * [04:04] FIFO Underflow Clear: DON'T USE here
+ * [03:03] FIFO Overflow Pending: DON'T USE here
+ * [02:02] FIFO Underlfow Pending: DON'T USE here
+ * [01:01] FIFO Overlfow Enabled: Enabled
+ * [00:00] FIFO Underflow Enabled: Enabled
+ * TIME_CFG0
+ * [31:16] DRAM Refresh Time: 0 CSB clocks
+ * [15:8] DRAM Command Time: 0 CSB clocks
+ * [07:00] DRAM Precharge Time: 0 CSB clocks
+ * TIME_CFG1
+ * [31:26] DRAM tRFC:
+ * [25:21] DRAM tWR1:
+ * [20:17] DRAM tWRT1:
+ * [16:11] DRAM tDRR:
+ * [10:05] DRAM tRC:
+ * [04:00] DRAM tRAS:
+ * TIME_CFG2
+ * [31:28] DRAM tRCD:
+ * [27:23] DRAM tFAW:
+ * [22:19] DRAM tRTW1:
+ * [18:15] DRAM tCCD:
+ * [14:10] DRAM tRTP:
+ * [09:05] DRAM tRP:
+ * [04:00] DRAM tRPA
+ */
+
+#define CFG_MDDRC_SYS_CFG 0xF8604200
+#define CFG_MDDRC_SYS_CFG_RUN 0xE8604200
+#define CFG_MDDRC_SYS_CFG_EN 0x30000000
+#define CFG_MDDRC_TIME_CFG0 0x0000281E
+#define CFG_MDDRC_TIME_CFG0_RUN 0x01F4281E
+#define CFG_MDDRC_TIME_CFG1 0x54EC1168
+#define CFG_MDDRC_TIME_CFG2 0x35210864
+
+#define CFG_MICRON_NOP 0x01380000
+#define CFG_MICRON_PCHG_ALL 0x01100400
+#define CFG_MICRON_MR 0x01000022
+#define CFG_MICRON_EM2 0x01020000
+#define CFG_MICRON_EM3 0x01030000
+#define CFG_MICRON_EN_DLL 0x01010000
+#define CFG_MICRON_RST_DLL 0x01000932
+#define CFG_MICRON_RFSH 0x01080000
+#define CFG_MICRON_INIT_DEV_OP 0x01000832
+#define CFG_MICRON_OCD_DEFAULT 0x01010780
+#define CFG_MICRON_OCD_EXIT 0x01010400
+
+/* DDR Priority Manager Configuration */
+#define CFG_MDDRCGRP_PM_CFG1 0x000777AA
+#define CFG_MDDRCGRP_PM_CFG2 0x00000055
+#define CFG_MDDRCGRP_HIPRIO_CFG 0x00000000
+#define CFG_MDDRCGRP_LUT0_MU 0x11111117
+#define CFG_MDDRCGRP_LUT0_ML 0x7777777A
+#define CFG_MDDRCGRP_LUT1_MU 0x4444EEEE
+#define CFG_MDDRCGRP_LUT1_ML 0xEEEEEEEE
+#define CFG_MDDRCGRP_LUT2_MU 0x44444444
+#define CFG_MDDRCGRP_LUT2_ML 0x44444444
+#define CFG_MDDRCGRP_LUT3_MU 0x55555555
+#define CFG_MDDRCGRP_LUT3_ML 0x55555558
+#define CFG_MDDRCGRP_LUT4_MU 0x11111111
+#define CFG_MDDRCGRP_LUT4_ML 0x1111117C
+#define CFG_MDDRCGRP_LUT0_AU 0x33333377
+#define CFG_MDDRCGRP_LUT0_AL 0x7777EEEE
+#define CFG_MDDRCGRP_LUT1_AU 0x11111111
+#define CFG_MDDRCGRP_LUT1_AL 0x11111111
+#define CFG_MDDRCGRP_LUT2_AU 0x11111111
+#define CFG_MDDRCGRP_LUT2_AL 0x11111111
+#define CFG_MDDRCGRP_LUT3_AU 0x11111111
+#define CFG_MDDRCGRP_LUT3_AL 0x11111111
+#define CFG_MDDRCGRP_LUT4_AU 0x11111111
+#define CFG_MDDRCGRP_LUT4_AL 0x11111111
+
+/*
+ * NOR FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */
+#define CFG_FLASH_USE_BUFFER_WRITE
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * CPLD registers area is really only 32 bytes in size, but the smallest possible LP
+ * window is 64KB
+ */
+#define CFG_CPLD_BASE 0x82000000
+#define CFG_CPLD_SIZE 0x00010000 /* 64 KB */
+
+#define CFG_SRAM_BASE 0x30000000
+#define CFG_SRAM_SIZE 0x00020000 /* 128 KB */
+
+#define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */
+#define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */
+
+/* Use SRAM for initial stack */
+#define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END CFG_SRAM_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE /* Start of monitor */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */
+#if CONFIG_PSC_CONSOLE != 3
+#error CONFIG_PSC_CONSOLE must be 3
+#endif
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE
+#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR
+#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE
+#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#if 0
+#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */
+#endif
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC512x_FEC 1
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR 0x1
+#define CONFIG_MII 1 /* MII PHY management */
+
+#if 0
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+#endif
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+/* This has to be a multiple of the Flash sector size */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+/*
+ * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock.
+ * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set
+ * to 0xFFFF, watchdog timeouts after about 64s. For details refer
+ * to chapter 36 of the MPC5121e Reference Manual.
+ */
+#define CONFIG_WATCHDOG /* enable watchdog */
+#define CFG_WATCHDOG_VALUE 0xFFFF
+
+ /*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#ifdef CONFIG_CMD_KGDB
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#ifdef CONFIG_CMD_KGDB
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_HOSTNAME ads5121
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "load=tftp 200000 /tftpboot/ads5121/u-boot.bin\0" \
+ "update=protect off FFF00000 +${filesize};" \
+ "era FFF00000 +${filesize};cp.b 200000 FFF00000 ${filesize}\0" \
+ "upd=run load;run update\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h
index c410891..703d312 100644
--- a/include/configs/adsvix.h
+++ b/include/configs/adsvix.h
@@ -68,10 +68,28 @@
#define CONFIG_DOS_PARTITION 1
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PCMCIA
+
+#undef CONFIG_CMD_NET
+
#undef CONFIG_SHOW_BOOT_PROGRESS
@@ -162,7 +180,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
/* #define CONFIG_INITRD_TAG 1 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/aev.h b/include/configs/aev.h
index f6f530c..5bab793 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -44,11 +44,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -91,34 +86,42 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- CFG_CMD_PCI | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -324,7 +327,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -343,9 +346,13 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index df057d9..d88c3ad 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -210,25 +210,37 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_FPGA | \
- CFG_CMD_NAND | \
- CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -237,7 +249,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -358,7 +370,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 9a1c559..73a8885 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -71,12 +71,21 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index 1a69ebe..226ad54 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -66,18 +66,30 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
#define CFG_AUTOLOAD "n" /* No autoload */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 8fad55d..a65c5f3 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -97,18 +97,31 @@
#define CONFIG_BOOTDELAY 3
/* #define CONFIG_ENV_OVERWRITE 1 */
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | CFG_CMD_MII |\
- CFG_CMD_DHCP ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_LOADS
+
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
@@ -150,6 +163,11 @@
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91C_USE_RMII
+/* AC Characteristics */
+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS (0xC << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
#define CONFIG_HAS_DATAFLASH 1
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS 2
diff --git a/include/configs/atc.h b/include/configs/atc.h
index bf6c170..3ff4b68 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -64,9 +64,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
@@ -124,27 +122,37 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_DATE | \
- CFG_CMD_IDE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_IDE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_DOS_PARTITION
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -285,7 +293,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index beaf385..e1d8f74 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -108,47 +108,29 @@
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \
- | CONFIG_BOOTP_GATEWAY)
-
-#define CONFIG_COMMANDS (CFG_CMD_BDI \
- | CFG_CMD_LOADS \
- | CFG_CMD_LOADB \
- | CFG_CMD_IMI \
- /* | CFG_CMD_CACHE */ \
- | CFG_CMD_FLASH \
- | CFG_CMD_MEMORY \
- | CFG_CMD_NET \
- | CFG_CMD_ENV \
- /* | CFG_CMD_IRQ */ \
- | CFG_CMD_BOOTD \
- | CFG_CMD_CONSOLE \
- /* | CFG_CMD_EEPROM */ \
- | CFG_CMD_ASKENV \
- | CFG_CMD_RUN \
- | CFG_CMD_ECHO \
- /* | CFG_CMD_I2C */ \
- | CFG_CMD_REGINFO \
- /* | CFG_CMD_DATE */ \
- | CFG_CMD_DHCP \
- /* | CFG_CMD_AUTOSCRIPT */ \
- /* | CFG_CMD_MII */ \
- | CFG_CMD_MISC \
- /* | CFG_CMD_SDRAM */ \
- /* | CFG_CMD_DIAG */ \
- /* | CFG_CMD_HWFLOW */ \
- /* | CFG_CMD_SAVES */ \
- /* | CFG_CMD_SPI */ \
- /* | CFG_CMD_PING */ \
- | CFG_CMD_MMC \
- | CFG_CMD_FAT \
- | CFG_CMD_IMLS \
- /* | CFG_CMD_ITEST */ \
- | CFG_CMD_EXT2 \
- | CFG_CMD_JFFS2 \
- )
-
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index d58344d..14c5638 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -222,6 +222,8 @@
#define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */
#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */
+#define CONFIG_PROG_SDRAM_TLB
+#undef CFG_DRAM_TEST
/*-----------------------------------------------------------------------
* I2C
@@ -316,45 +318,55 @@
#define USB_2_0_DEVICE
#endif /*CONFIG_440EP*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_BAMBOO_NAND
-#define _CFG_CMD_NAND CFG_CMD_NAND
-#else
-#define _CFG_CMD_NAND 0
-#endif /* CONFIG_BAMBOO_NAND */
+#define CONFIG_CMD_NAND
+#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_USB | \
- CFG_CMD_FAT | \
- CFG_CMD_EXT2 | \
- _CFG_CMD_NAND | \
- CFG_CMD_SNTP )
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -407,7 +419,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -419,7 +431,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/barco.h b/include/configs/barco.h
index 624fa1d..0bb446f 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -70,22 +70,30 @@
#define CONFIG_BOOTARGS "mem=32M"
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS
+
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PCI )
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */
#define CONFIG_BOOTDELAY 1
@@ -110,7 +118,6 @@
*/
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
-#undef CFG_CMD_NET
#define PCI_ENET0_IOADDR 0x80000000
#define PCI_ENET0_MEMADDR 0x80000000
@@ -340,7 +347,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 65dfc81..6cb6bc4 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -97,19 +97,31 @@
#define CONFIG_LOADS_ECHO 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_DATE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 79a1404..cce6ef7 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -240,23 +240,6 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
-#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE)
-
-#else
-#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE)
-#endif
#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
#if (CONFIG_DRIVER_SMC91111)
@@ -305,20 +288,39 @@
#endif
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_CMD_PING
+#endif
+
#if (CONFIG_SOFT_I2C)
-#define CONFIG_COMMANDS2 CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS2 0
-#endif /* CONFIG_SOFT_I2C */
+#define CONFIG_CMD_I2C
+#endif
#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP)
-#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2)
+#define CONFIG_CMD_DHCP
#endif
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Console settings
@@ -345,7 +347,7 @@
#endif
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -395,7 +397,7 @@
/* Enabled below option for CF support */
/* #define CONFIG_STAMP_CF 1 */
-#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_STAMP_CF) && defined(CONFIG_CMD_IDE)
#define CONFIG_MISC_INIT_R 1
#define CONFIG_DOS_PARTITION 1
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index f6755ac..b9a9e3c 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -144,11 +144,8 @@
#endif
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
/* CF-CARD IDE-HDD Support */
@@ -159,51 +156,65 @@
#if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE)
# define CONFIG_BFIN_IDE 1
-# define ADD_IDE_CMD CFG_CMD_IDE
-#else
-# define ADD_IDE_CMD 0
#endif
/*#define CONFIG_BF537_NAND */ /* Add nand flash support */
-#ifdef CONFIG_BF537_NAND
-# define ADD_NAND_CMD CFG_CMD_NAND
-#else
-# define ADD_NAND_CMD 0
-#endif
-
#define CONFIG_NETCONSOLE 1
#define CONFIG_NET_MULTI 1
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+
#if (BFIN_CPU == ADSP_BF534)
-#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#undef CONFIG_CMD_NET
#else
-#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL | CFG_CMD_PING)
+#define CONFIG_CMD_PING
+#endif
+
+#if defined(CONFIG_BFIN_CF_IDE) \
+ || defined(CONFIG_BFIN_HDD_IDE) \
+ || defined(CONFIG_BFIN_TRUE_IDE)
+#define CONFIG_CMD_IDE
+#endif
+
#endif
#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
-#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DHCP | \
- ADD_IDE_CMD | \
- ADD_NAND_CMD | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_DATE)
-#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_EEPROM | \
- ADD_IDE_CMD | \
- CFG_CMD_DATE)
+
+#define CONFIG_CMD_DHCP
+
+#if defined(CONFIG_POST)
+#define CONFIG_CMD_DIAG
#endif
+#ifdef CONFIG_BF537_NAND
+#define CONFIG_CMD_NAND
+#endif
+
+#endif
+
+
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
#define CONFIG_LOADADDR 0x1000000
@@ -256,9 +267,6 @@
#endif
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
#if (BFIN_CPU == ADSP_BF534)
#define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */
@@ -277,7 +285,7 @@
#endif
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 8d826fa..2966260 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -164,12 +164,6 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DHCP)
#define CONFIG_EXTRA_ENV_SETTINGS \
"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
@@ -186,20 +180,36 @@
"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
""
#else
-#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_CACHE | \
- CFG_CMD_JFFS2)
#define CONFIG_EXTRA_ENV_SETTINGS \
"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"flashboot=bootm 0x20100000\0" \
""
#endif
-#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+
+#if defined(CONFIG_DRIVER_SMC91111)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#endif
+
/*
* Console settings
@@ -208,7 +218,7 @@
#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 10c48143..7736a1e 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -137,25 +137,37 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -166,7 +178,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -219,7 +231,7 @@
#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
-#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+#if defined(CONFIG_CMD_EEPROM)
#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#endif
@@ -314,7 +326,7 @@
*/
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EP CPU */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -426,7 +438,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
index ae75539..a9a5254 100644
--- a/include/configs/c2mon.h
+++ b/include/configs/c2mon.h
@@ -68,7 +68,15 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -77,15 +85,18 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
@@ -98,7 +109,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -174,7 +185,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index ec6d57e..d577b95 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -38,11 +38,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_R
/*
@@ -52,21 +47,30 @@
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
/*
* MUST be low boot - HIGHBOOT is not supported anymore
@@ -181,7 +185,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -199,6 +203,11 @@
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index 6997c7a..e06735d 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -61,10 +61,21 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2
@@ -75,7 +86,7 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
#define CONFIG_CMDLINE_TAG
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index 5947c2a..ae40b35 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -58,10 +58,23 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-#undef CONFIG_COMMANDS
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV))
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ENV
+
#define CONFIG_BOOTDELAY 0
#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200"
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index e62fc06..c1dd33d 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -58,10 +58,23 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-#undef CONFIG_COMMANDS
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV))
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ENV
+
#define CONFIG_BOOTDELAY 0
#define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200"
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
new file mode 100644
index 0000000..d554348
--- /dev/null
+++ b/include/configs/cm5200.h
@@ -0,0 +1,338 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_CM5200 1 /* ... on CM5200 platform */
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */
+/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CONFIG_MISC_INIT_R 1
+#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */
+
+/*
+ * POST support
+ */
+#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+/* List of I2C addresses to be verified by POST */
+#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
+
+/* display image timestamps */
+#define CONFIG_TIMESTAMP 1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
+ "echo"
+#undef CONFIG_BOOTARGS
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.33\0" \
+ "serverip=192.168.1.1\0" \
+ "gatewayip=192.168.1.1\0" \
+ "console=ttyPSC0\0" \
+ "u-boot_addr=100000\0" \
+ "kernel_addr=200000\0" \
+ "kernel_addr_flash=fc0c0000\0" \
+ "fdt_addr=400000\0" \
+ "fdt_addr_flash=fc0a0000\0" \
+ "ramdisk_addr=500000\0" \
+ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
+ "u-boot=/tftpboot/cm5200/u-boot.bin\0" \
+ "bootfile_fdt=/tftpboot/cm5200/uImage\0" \
+ "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=prot off fc000000 +${filesize}; " \
+ "era fc000000 +${filesize}; " \
+ "cp.b ${u-boot_addr} fc000000 ${filesize}; " \
+ "prot on fc000000 +${filesize}\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
+ "flash_flash=run flashargs addinit addip addcons;" \
+ "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \
+ "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \
+ "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \
+ "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_flash"
+
+/*
+ * Low level configuration
+ */
+
+/*
+ * Clock configuration
+ */
+#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */
+#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_LOWBOOT 1
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_BOARD_TYPES 1 /* we use board_type */
+
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE 0xfc000000
+/* we need these despite using CFI */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
+#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT 1
+#undef CFG_LOWBOOT
+#endif
+
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */
+/* use board_early_init_r to enable flash write in CS_BOOT */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/* Flash memory addressing */
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* No burst, dead cycle = 1 for CS0 (Flash) */
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x00000001
+
+/*
+ * SDRAM configuration
+ * settings for k4s561632E-xx75, assuming XLB = 132 MHz
+ */
+#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */
+#define SDRAM_CONTROL 0x514F0000
+#define SDRAM_CONFIG1 0xE2333900
+#define SDRAM_CONFIG2 0x8EE70000
+
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE 1
+#define MTDIDS_DEFAULT "nor0=cm5200-0"
+#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \
+ "384k(uboot),128k(env)," \
+ "128k(redund_env),128k(dtb)," \
+ "2m(kernel),27904k(rootfs)," \
+ "-(config)"
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 */
+#define CFG_I2C_SPEED 40000 /* 40 kHz */
+#define CFG_I2C_SLAVE 0x0
+#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
+#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+/* Partitions (for USB) */
+#define CONFIG_MAC_PARTITION 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_ISO_PARTITION 1
+
+/*
+ * Invoke our last_stage_init function - needed by fwupdate
+ */
+#define CONFIG_LAST_STAGE_INIT 1
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Pin multiplexing configuration
+ */
+
+/*
+ * CS1/GPIO_WKUP_6: GPIO (default)
+ * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
+ * IRDA/PSC6: UART
+ * Ether: Ethernet 100Mbit with MD
+ * PCI_DIS: PCI controller disabled
+ * USB: USB
+ * PSC3: SPI with UART3
+ * PSC2: UART
+ * PSC1: UART
+ */
+#define CFG_GPS_PORT_CONFIG 0x10559C44
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_ALT_MEMTEST 1
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */
+
+#define CONFIG_LOOPW 1
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#ifdef CONFIG_CMD_KGDB
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Flat Device Tree support
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 572a70f..f32c8c2 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -104,35 +104,44 @@
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#else
+#define CONFIG_TIMESTAMP
#endif
/* still about 20 kB free with this defined */
#define CFG_LONGHELP
#define CONFIG_BOOTDELAY 1
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP ) & \
- ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#else
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP ) & \
- ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#define CONFIG_TIMESTAMP
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+
+#if defined(CONFIG_HARD_I2C)
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
#endif
-#define CFG_LONGHELP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index e459919..cd92af2 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -44,13 +44,33 @@
#define CONFIG_BAUDRATE 57600
-#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \
- CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ASKENV | \
- CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_ENV | CFG_CMD_RUN | \
- CFG_CMD_IMI)
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_IMI
+
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -73,7 +93,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 9033fa8..510524a 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -130,16 +130,27 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-/* ---
- * Define which commmands should be available at u-boot command prompt
- * ---
+
+/*
+ * BOOTP options
*/
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | CFG_CMD_PING & ~(CFG_CMD_LOADS | \
-CFG_CMD_LOADB) | CFG_CMD_MII)
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_MII
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
*-----------------------------------------------------------------------------
@@ -184,7 +195,7 @@ from which user programs will be started */
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index aea2e64..84d50c7 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -71,8 +71,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -88,10 +87,25 @@
#define CONFIG_BAUDRATE 9600
#endif
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL|CFG_CMD_KGDB)&~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_KGDB
+
+#undef CONFIG_CMD_NET
+
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -102,7 +116,7 @@
#define CONFIG_BOOTARGS "root=/dev/ram rw"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -124,7 +138,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -256,7 +270,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
#endif
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index 80962d3..ce38af1 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -59,10 +59,25 @@
#define CFG_I2C_SLAVE 0x7F
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_KGDB | CFG_CMD_I2C) & ~CFG_CMD_NET)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_KGDB
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -73,7 +88,7 @@
#define CONFIG_BOOTARGS "root=/dev/ram rw"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#define CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -88,7 +103,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -200,7 +215,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index f5efcd9..ce4ea1f 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -50,11 +50,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -92,12 +87,6 @@
#define CONFIG_NS8382X 1
#endif
-#define ADD_PCI_CMD CFG_CMD_PCI
-
-#else /* MPC5100 */
-
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
-
#endif
/* Partitions */
@@ -107,28 +96,35 @@
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
#endif
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_IDE | \
- CFG_CMD_I2C | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_DATE | \
- ADD_PCI_CMD )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_DATE
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CFG_LOWBOOT 1
@@ -277,7 +273,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -295,6 +291,11 @@
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 776e1d2..eb93a8f 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -61,10 +61,21 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200"
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index f04102e..0be0f21 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -57,10 +57,34 @@
#define CONFIG_BAUDRATE 19200
#undef CONFIG_MISC_INIT_R /* not used yet */
-#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
@@ -73,7 +97,7 @@
#define CONFIG_CMDLINE_TAG 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 27d64c1..c43b497 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -73,30 +73,32 @@
#endif
/*
- * BOOTP/DHCP protocol configuration
- *
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_BOOTFILESIZE )
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS2
+
+
/*
- * U-Boot Monitor Command Line Functions Configuration
- *
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
/*
* Serial download configuration
@@ -109,7 +111,7 @@
* KGDB Configuration
*
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -125,7 +127,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 09d52de..a7120aa 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -73,30 +73,31 @@
#endif
/*
- * BOOTP/DHCP protocol configuration
- *
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_BOOTFILESIZE )
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS2
+
+
/*
- * U-Boot Monitor Command Line Functions Configuration
- *
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_PCI | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
/*
* Serial download configuration
@@ -109,7 +110,7 @@
* KGDB Configuration
*
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -125,7 +126,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index 071d5b7..976dae3 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -99,20 +99,32 @@
#define CONFIG_BOOTDELAY 3
/* #define CONFIG_ENV_OVERWRITE 1 */
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_LOADS
+
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
new file mode 100644
index 0000000..8ecd059
--- /dev/null
+++ b/include/configs/davinci_dvevm.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define DV_EVM
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#ifdef CFG_NAND_SMALLPAGE
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#else
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#endif
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
new file mode 100644
index 0000000..96c9a30
--- /dev/null
+++ b/include/configs/davinci_schmoogie.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SCHMOOGIE
+#define CFG_NAND_LARGEPAGE
+#define CFG_USE_NAND
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+/*=====================*/
+/* Board related stuff */
+/*=====================*/
+#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
+#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
+#define CONFIG_HAS_UID
+#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
+#define CFG_UID_ADDR 0x50 /* UID chip I2C address */
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
new file mode 100644
index 0000000..de8c4fa
--- /dev/null
+++ b/include/configs/davinci_sonata.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SONATA_BOARD
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 4cc5085..b2f606f 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -75,21 +75,57 @@
#ifdef CONFIG_DBAU1550
/* Boot from flash by default, revert to bootp */
#define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm"
-
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_NET) & \
- ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FPGA | CFG_CMD_IDE | \
- CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
- CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
#else /* CONFIG_DBAU1550 */
#define CONFIG_BOOTCOMMAND "bootp;bootm"
-
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
- ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
- CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | \
- CFG_CMD_ELF | CFG_CMD_BDI | CFG_CMD_BEDBUG))
#endif /* CONFIG_DBAU1550 */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_RUN
+
+
+#ifdef CONFIG_DBAU1550
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_PCMCIA
+
+#else
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#endif
+
/*
* Miscellaneous configurable options
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 8ff963f..7667e5e 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -122,23 +122,35 @@
#define CONFIG_BAUDRATE 9600
#define CONFIG_DRAM_SPEED 100 /* MHz */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGBD | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SAVES | \
- CFG_CMD_SDRAM)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_KGBD
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
/*
@@ -435,7 +447,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 1568120..09667ed 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -87,22 +87,49 @@
#define CONFIG_BAUDRATE 115200
-/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifdef TURN_ON_ETHERNET
-# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
+
+#define CONFIG_CMD_PING
+
#else
-# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_ENV \
- | CFG_CMD_NAND \
- | CFG_CMD_I2C) \
- & ~(CFG_CMD_NET \
- | CFG_CMD_FLASH \
- | CFG_CMD_IMLS))
+
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
#endif
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_DOS_PARTITION 1
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE
+#define CFG_USB_OHCI_SLOT_NAME "delta"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define LITTLEENDIAN 1 /* used by usb_ohci.c */
#define CONFIG_BOOTDELAY -1
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -114,7 +141,7 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_TIMESTAMP
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index 9ac2856..d32e046 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -66,10 +66,21 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
@@ -80,7 +91,7 @@
#define CONFIG_BOOTFILE "dnp1110"
#define CONFIG_BOOTCOMMAND "tftp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index a014c7c..f8e2c88 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -58,17 +58,27 @@
/*#define CONFIG_DRAM_SPEED 66 */ /* MHz */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_FLASH | \
- CFG_CMD_SDRAM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ENV | \
- CFG_CMD_PCI )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_PCI
/*-----------------------------------------------------------------------
@@ -398,7 +408,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 4a1385c..2c626a0 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -208,26 +208,38 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -236,7 +248,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -286,7 +298,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -298,7 +310,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index bdda629..f5cf477 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -62,12 +62,23 @@
#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2)
+#define CONFIG_CMD_JFFS2
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
@@ -78,7 +89,7 @@
/*#define CONFIG_BOOTFILE "impa7" */
#define CONFIG_BOOTCOMMAND "bootp;bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 04147a5..85ad70a 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -60,8 +60,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
@@ -123,23 +123,34 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_ECHO \
- | CFG_CMD_I2C \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -157,7 +168,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -183,20 +194,20 @@
#define CFG_DIRECT_FLASH_TFTP
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_FIRST_SECTOR 0
#define CFG_JFFS2_LAST_SECTOR 62
#define CFG_JFFS2_SORT_FRAGMENTS
#define CFG_JFFS_CUSTOM_PART
-#endif /* CFG_CMD_JFFS2 */
+#endif
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 100000 /* I2C speed */
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
-#endif /* CFG_CMD_I2C */
+#endif
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -240,7 +251,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 6862519..025c249 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -183,8 +183,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
@@ -291,37 +290,49 @@
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
-/* What U-Boot subsytems do you want enabled? */
+
/*
-*/
-#define CONFIG_COMMANDS ( CFG_CMD_ALL & \
- ~( CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DCR | \
- CFG_CMD_DHCP | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MII | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE| \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG ) )
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DCR
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
/* Where do the internal registers live? */
@@ -342,13 +353,10 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -496,7 +504,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a77ccef..4febd32 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -60,8 +60,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
@@ -108,22 +108,34 @@
#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_ECHO \
- | CFG_CMD_I2C \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_DATE \
- | CFG_CMD_DTT \
- | CFG_CMD_EEPROM \
- | CFG_CMD_PCI \
- | CFG_CMD_DIAG \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DIAG
+
#define CONFIG_ETHADDR 00:10:EC:00:88:65
#define CONFIG_HAS_ETH1
@@ -138,7 +150,7 @@
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -156,7 +168,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -308,20 +320,20 @@
#define CFG_DIRECT_FLASH_TFTP
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_FIRST_SECTOR 0
#define CFG_JFFS2_LAST_SECTOR 62
#define CFG_JFFS2_SORT_FRAGMENTS
#define CFG_JFFS_CUSTOM_PART
-#endif /* CFG_CMD_JFFS2 */
+#endif
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 100000 /* I2C speed */
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
-#endif /* CFG_CMD_I2C */
+#endif
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -358,7 +370,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 88c2c74..66500c2 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -72,12 +72,23 @@
#define CONFIG_BAUDRATE 19200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
+#define CONFIG_CMD_PING
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_ETHADDR 00:40:95:36:35:33
#define CONFIG_NETMASK 255.255.255.0
@@ -89,7 +100,7 @@
#define CONFIG_BOOTCOMMAND "tftp 100000 uImage"
/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index b68a2dc..e11ce4c 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -79,18 +79,30 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp"
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
#define CFG_AUTOLOAD "n" /* No autoload */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index a49ed3b..c2a50c1 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -71,12 +71,37 @@
/* Boot from Compact flash partition 2 as default */
#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
- ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
- CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
- CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_AUTOSCRIPT
+
/*
* Miscellaneous configurable options
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 4f83b19..ff57240 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -194,8 +194,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
@@ -286,13 +285,16 @@
#undef CONFIG_AUTOBOOT_DELAY_STR
#define DEBUG_BOOTKEYS 0
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
/* undef this to save memory */
#define CFG_LONGHELP
@@ -300,14 +302,21 @@
/* Monitor Command Prompt */
#define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */
-#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MII)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+
+#undef CONFIG_CMD_KGDB
+
/* Where do the internal registers live? */
#define CFG_IMMR 0xf0000000
@@ -331,13 +340,10 @@
#define CONFIG_GW8260 1 /* on an GW8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -473,7 +479,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
new file mode 100644
index 0000000..577f459
--- /dev/null
+++ b/include/configs/hcu4.h
@@ -0,0 +1,348 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * hcu4.h - configuration for HCU4 board (similar to hcu5.h)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_HCU4 1 /* Board is HCU4 */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */
+#define CONFIG_405GP 1
+#define CONFIG_4xx 1
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+*----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/* ... with on-chip memory here (4KBytes) */
+#define CFG_OCM_DATA_ADDR 0xF4000000
+#define CFG_OCM_DATA_SIZE 0x00001000
+/* Do not set up locked dcache as init ram. */
+#undef CFG_INIT_DCACHE_CS
+
+/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
+#define CFG_TEMP_STACK_OCM 1
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CONFIG_SERIAL_MULTI /* needed to be able to define
+ CONFIG_SERIAL_SOFTWARE_FIFO */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/* Set console baudrate to 9600 */
+#define CONFIG_BAUDRATE 9600
+
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_NOWHERE
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+/* Put the environment after the SDRAM configuration */
+#define PROM_SIZE 2048
+#define CFG_ENV_OFFSET 512
+#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+/* Put the environment in Flash */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
+ * the first internal I2C controller of the PPC440EPx
+ *----------------------------------------------------------------------*/
+#define CFG_SPD_BUS_NUM 0
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#undef CFG_I2C_MULTI_EEPROMS
+
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME hcu4
+#define CONFIG_IPADDR 172.25.1.42
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SERVERIP 172.25.1.3
+
+#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x01000000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/home/diagnose/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/hcu4/uImage\0" \
+ "load=tftp 100000 hcu4/u-boot.bin\0" \
+ "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
+ "cp.b 100000 FFFa0000 60000\0" \
+ "upd=run load;run update\0" \
+ "vx=tftp ${loadaddr} hcu4_vx_rom;" \
+ "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \
+ "bootvx ${loadaddr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run vx"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+/* SPD EEPROM (sdram speed config) disabled */
+#define CONFIG_SPD_EEPROM 1
+#define SPD_EEPROM_ADDRESS 0x50
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB1AP 0x03041200
+#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB2AP 0x02054500
+#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB3AP 0x01840300
+#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB4AP 0x01800300
+#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR 0xF0000500
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
new file mode 100644
index 0000000..d0bf251
--- /dev/null
+++ b/include/configs/hcu5.h
@@ -0,0 +1,393 @@
+/*
+ * (C) Copyright 2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * hcu5.h - configuration for HCU5 board (derived from sequoia.h)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_HCU5 1 /* Board is HCU5 */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xfff00000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CONFIG_BAUDRATE 9600
+#undef CONFIG_SERIAL_MULTI /* needed to be able to define
+ CONFIG_SERIAL_SOFTWARE_FIFO, but
+ CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_NOWHERE
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+/* Put the environment after the SDRAM and bootstrap configuration */
+#define PROM_SIZE 2048
+#define CFG_BOOSTRAP_OPTION_OFFSET 512
+#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10)
+#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+/* Put the environment in Flash */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
+#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
+#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */
+#define CONFIG_DDR_ECC 1 /* enable ECC */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
+ * the second internal I2C controller of the PPC440EPx
+ *----------------------------------------------------------------------*/
+#define CFG_SPD_BUS_NUM 1
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#undef CFG_I2C_MULTI_EEPROMS
+
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME hcu5
+#define CONFIG_IPADDR 172.25.1.42
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SERVERIP 172.25.1.3
+
+#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x01000000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "bootfile=hcu5/uImage\0" \
+ "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \
+ "load=tftp 100000 hcu5/u-boot.bin\0" \
+ "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
+ "cp.b 100000 FFFa0000 60000\0" \
+ "upd=run load;run update\0" \
+ "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \
+ "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \
+ "bootvx ${loadaddr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run vx"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_M88E1111_PHY 1
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+
+#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CS_1 0xC8000000 /* CAN */
+#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */
+#define CFG_CPLD CFG_CS_2
+#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ * Memory Bank 0 (BOOT-FLASH) initialization
+ */
+#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
+
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* Memory Bank 1 CAN-Chips initialization */
+#define CFG_EBC_PB1AP 0x02054500
+#define CFG_EBC_PB1CR 0xC8018000
+
+/* Memory Bank 2 CPLD/IMC-Bus standard initialization */
+#define CFG_EBC_PB2AP 0x01840300
+#define CFG_EBC_PB2CR 0xCC0BA000
+
+/* Memory Bank 3 IMC-Bus fast mode initialization */
+#define CFG_EBC_PB3AP 0x01800300
+#define CFG_EBC_PB3CR 0xCE0BA000
+
+/* Memory Bank 4 (not used) initialization */
+#undef CFG_EBC_PB4AP
+#undef CFG_EBC_PB4CR
+
+/* Memory Bank 5 (not used) initialization */
+#undef CFG_EBC_PB5AP
+#undef CFG_EBC_PB5CR
+
+#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
+#define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 )
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+ #define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index 91117ba..e3a2ed2 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -64,23 +64,28 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/*----------------------------------------------------------------------*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -157,7 +162,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 4d813d8..6c15b4e 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -38,11 +38,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_R
/*
@@ -55,22 +50,31 @@
/* Partitions */
#define CONFIG_DOS_PARTITION
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
@@ -222,7 +226,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -231,6 +235,11 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
@@ -242,8 +251,7 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 8cad98d..2f64ec2 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -69,8 +69,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
@@ -174,32 +173,44 @@
#define CONFIG_LAST_STAGE_INIT
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_FPGA | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NAND | \
- CFG_CMD_MMC | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_PCI | \
- CFG_CMD_USB | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE| \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG ) )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -218,7 +229,7 @@
#define DEBUG_BOOTKEYS 0
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -247,7 +258,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -400,7 +411,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
#endif
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index b1dbe2c..1ab7b27 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -78,18 +78,27 @@
"u-boot=/tftpboot/idmr/u-boot.bin\0" \
""
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Commands' definition
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_PING | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NET) & \
- ~(CFG_CMD_LOADS | \
- CFG_CMD_LOADB))
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
/*
@@ -115,11 +124,11 @@
#define CFG_PROMPT "=> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
@@ -206,8 +215,8 @@
"2m(rootfs)," \
"-(user)";
-#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_CMD_MII)
#error MII commands don't work on iDMR board and sholud not be enabled.
-#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+#endif
#endif /* _IDMR_H */
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index 8b841ff..0e52ffe 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -61,12 +61,23 @@
#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2)
+#define CONFIG_CMD_JFFS2
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
@@ -77,7 +88,7 @@
/*#define CONFIG_BOOTFILE "impa7" */
#define CONFIG_BOOTCOMMAND "bootp;bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 1c6216b..4caf54e 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -81,15 +81,29 @@
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_SNTP )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
/*
* Miscellaneous configurable options
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index ad3cf06..0fac28f 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -40,11 +40,6 @@
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -76,21 +71,30 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
@@ -239,7 +243,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -248,6 +252,11 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
@@ -259,8 +268,7 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 3cb9ebc..5310e0d 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -54,10 +54,34 @@
#define CONFIG_BAUDRATE 19200
#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */
-#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP|CFG_CMD_CACHE)
-/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_RUN
+
#define CONFIG_BOOTDELAY 3
/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 2f6e399..1452bf2 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -66,15 +66,26 @@
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
-/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */
/*#define CONFIG_NET_MULTI */
-/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
-#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_MEMORY
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 4189f9c..69310d4 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -70,17 +70,28 @@
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
+
/*
-#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_PCI)
-*/
-#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | \
- CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV \
- )
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-/* #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
#if 0
#define CONFIG_BOOTDELAY 2
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 9f9fdb2..bc5f9e1 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -53,14 +53,28 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PCI
+
#define CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_EEPRO100
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-/* These are u-boot generic parameters */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b*/
@@ -71,7 +85,7 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
#define CONFIG_CMDLINE_TAG
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index af4ecf6..da59230 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -75,16 +75,27 @@
#define CONFIG_BAUDRATE 115200
#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_NET | \
- CFG_CMD_MII | \
- CFG_CMD_PING)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-/* These are u-boot generic parameters */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 5b97526..b68c5aa 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -41,11 +41,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -71,7 +66,6 @@
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
-#define ADD_PCI_CMD CFG_CMD_PCI
#endif
#define CFG_XLB_PIPELINING 1
@@ -87,15 +81,28 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP)
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_PCI)
+#define CODFIG_CMD_PCI
+#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Autobooting
@@ -254,7 +261,7 @@
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -271,6 +278,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index a7eda07..110ad44 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -210,28 +210,40 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_DTT | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */
#define CONFIG_MII 1 /* MII PHY management */
@@ -254,7 +266,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -420,7 +432,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -432,7 +444,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index 6590f6f..75d9c3b 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -78,17 +78,29 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_I2C | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 61cf705..569800a 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -60,32 +60,44 @@
#undef CONFIG_WATCHDOG
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_DS164x
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP)
-#define CONFIG_NETCONSOLE
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
-#include <cmd_confdefs.h>
+
+#define CONFIG_NETCONSOLE
#define CFG_LONGHELP
#define CFG_PROMPT "=> "
@@ -178,7 +190,7 @@
#define CONFIG_SYS_CLK_FREQ 33333333
#define CFG_CACHELINE_SIZE 32
-#if CONFIG_COMMANDS & CFG_CMD_KGDB
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5
#endif
diff --git a/include/configs/lart.h b/include/configs/lart.h
index a00640b..8f18c9f 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -59,10 +59,21 @@
#define CONFIG_BAUDRATE 9600
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
@@ -73,7 +84,7 @@
#define CONFIG_BOOTFILE "elinos-lart"
#define CONFIG_BOOTCOMMAND "tftp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 715ed74..2b2d377 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -54,10 +54,26 @@
#define CONFIG_BAUDRATE 19200
#undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */
-#define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO)
-/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_RUN
+
#define CONFIG_BOOTDELAY 3
/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 7b6c695..e3fef5e 100755..100644
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -66,24 +66,31 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_MMC | \
- CFG_CMD_NET | \
- CFG_CMD_PING)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 5
/*
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
index d7d0460..0414889 100644
--- a/include/configs/lpd7a400.h
+++ b/include/configs/lpd7a400.h
@@ -55,19 +55,32 @@
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+ #define CONFIG_CMD_PING
+ #undef CONFIG_CMD_CACHE
#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+ #define CONFIG_CMD_DATE
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 3
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
index 4002e68..11ede96 100644
--- a/include/configs/lpd7a404.h
+++ b/include/configs/lpd7a404.h
@@ -55,19 +55,32 @@
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+ #define CONFIG_CMD_PING)
+ #undef CONFIG_CMD_CACHE
#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+ #define CONFIG_CMD_DATE
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 3
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index cbb59c5..26dbec9 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -136,7 +136,6 @@
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
#define CONFIG_DDR_ECC 1 /* with ECC support */
-#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */
/*-----------------------------------------------------------------------
* I2C
@@ -213,31 +212,38 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- 0)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -265,7 +271,7 @@
* PCI stuff
*-----------------------------------------------------------------------
*/
-#if (CONFIG_COMMANDS & CFG_CMD_PCI)
+#if defined(CONFIG_CMD_PCI)
/* General PCI */
#define CONFIG_PCI /* include pci support */
@@ -279,7 +285,7 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */
-#endif /* CONFIG_COMMANDS & CFG_CMD_PCI */
+#endif
/*
* For booting Linux, the board info and command line data
@@ -293,7 +299,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -305,7 +311,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index ad1035b..4adf254 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -67,10 +67,24 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -82,7 +96,7 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_TIMESTAMP
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 9b4c004..8a82702 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -170,34 +170,41 @@
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
+#define CONFIG_CMD_DIAG
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_SNTP )
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
@@ -210,7 +217,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -276,7 +283,7 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x40000000
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -370,7 +377,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 1d87c73..604b7d1 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -46,7 +46,7 @@
#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_LIME_BASE_0 0xc0000000
#define CFG_LIME_BASE_1 0xc1000000
@@ -74,11 +74,13 @@
/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
/*-----------------------------------------------------------------------
* Serial Port
@@ -103,9 +105,11 @@
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH0 0xFC000000
+#define CFG_FLASH1 0xF8000000
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
@@ -133,8 +137,26 @@
#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */
#if 0 /* test-only: disable ECC for now */
#define CONFIG_DDR_ECC 1 /* enable ECC */
+#define CFG_POST_ECC_ON CFG_POST_ECC
+#else
+#define CFG_POST_ECC_ON 0
#endif
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_ECC_ON | \
+ CFG_POST_CPU | \
+ CFG_POST_UART | \
+ CFG_POST_I2C | \
+ CFG_POST_CACHE | \
+ CFG_POST_FPU | \
+ CFG_POST_ETHER | \
+ CFG_POST_SPR)
+
+#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */
+#define CONFIG_LOGBUFFER
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
@@ -162,6 +184,8 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=lwmon5\0" \
"netdev=eth0\0" \
+ "unlock=yes\0" \
+ "logversion=2\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -183,6 +207,8 @@
"update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
"cp.b 200000 FFF80000 80000\0" \
"upd=run load;run update\0" \
+ "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
+ "autoscr 200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -216,9 +242,6 @@
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
-#define CMD_USB CFG_CMD_USB
-#else
-#define CMD_USB 0 /* no USB on 440GRx */
#endif /* CONFIG_440EPX */
/* Partitions */
@@ -226,36 +249,49 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_SUPPORT_VFAT
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
+#define CONFIG_SUPPORT_VFAT
+
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -310,7 +346,7 @@
/* Memory Bank 0 (NOR-FLASH) initialization */
#define CFG_EBC_PB0AP 0x03050200
-#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000)
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000)
/* Memory Bank 1 (Lime) initialization */
#define CFG_EBC_PB1AP 0x01004380
@@ -330,14 +366,24 @@
* Graphics (Fujitsu Lime)
*----------------------------------------------------------------------*/
/* SDRAM Clock frequency adjustment register */
-#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000
-/* Lime Clock frequency is to set 133MHz */
+#define CFG_LIME_SDRAM_CLOCK 0xC1FC0038
+/* Lime Clock frequency is to set 100MHz */
+#define CFG_LIME_CLOCK_100MHZ 0x00000
+#if 0
+/* Lime Clock frequency for 133MHz */
#define CFG_LIME_CLOCK_133MHZ 0x10000
+#endif
/* SDRAM Parameter register */
#define CFG_LIME_MMR 0xC1FCFFFC
-/* SDRAM parameter value */
+/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
+ and pixel flare on display when 133MHz was configured. According to
+ SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
+#ifdef CFG_LIME_CLOCK_133MHZ
+#define CFG_LIME_MMR_VALUE 0x414FB7F3
+#else
#define CFG_LIME_MMR_VALUE 0x414FB7F2
+#endif
/*-----------------------------------------------------------------------
* GPIO Setup
@@ -430,7 +476,7 @@
*----------------------------------------------------------------------*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -442,7 +488,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index c2324a0..cc2dbcd 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,11 +40,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*
@@ -92,27 +87,37 @@
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/* automatic software updates (see board/mcc200/auto_update.c) */
#define CONFIG_AUTO_UPDATE 1
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_USB_CMD | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C)
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
+
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Autobooting
*/
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -128,20 +133,30 @@
# define CFG__LINUX_CONSOLE "ttyS0"
#else
# define CFG__BOARDNAME "mcc200"
-# define CFG__LINUX_CONSOLE "ttyEU7"
+# define CFG__LINUX_CONSOLE "ttyEU5"
#endif
+/* Network */
+#define CONFIG_ETHADDR 00:17:17:ff:00:00
+#define CONFIG_IPADDR 10.76.9.29
+#define CONFIG_SERVERIP 10.76.9.1
+
+#include <version.h> /* For U-Boot version */
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubootver=" U_BOOT_VERSION "\0" \
"netdev=eth0\0" \
"hostname=" CFG__BOARDNAME "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "ramargs=setenv bootargs root=/dev/mtdblock2 " \
+ "rootfstype=cramfs\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
- "console=${console},${baudrate}\0" \
+ "console=${console},${baudrate} " \
+ "ubootver=${ubootver} board=${board}\0" \
"flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addcons;" \
@@ -153,6 +168,7 @@
"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \
"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \
"text_base=" MK_STR(TEXT_BASE) "\0" \
+ "kernel_addr=0xFC0C0000\0" \
"update=protect off ${text_base} +${filesize};" \
"era ${text_base} +${filesize};" \
"cp.b 200000 ${text_base} ${filesize}\0" \
@@ -253,7 +269,7 @@
/*
* Ethernet configuration
*/
-#define CONFIG_MPC5xxx_FEC 1
+/*#define CONFIG_MPC5xxx_FEC 1*/
/*
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
*/
@@ -291,7 +307,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -307,6 +323,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
@@ -329,6 +350,13 @@
#define CFG_CS1_SIZE 0x00001000
#define CFG_CS1_CFG 0x1d300
+/* Leica - build revision resistors */
+/*
+#define CFG_CS3_START 0x80020000
+#define CFG_CS3_SIZE 0x00000004
+#define CFG_CS3_CFG 0x1d300
+*/
+
/*
* Select one of quarts as a default
* console. If undefined - PSC console
@@ -384,4 +412,8 @@
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00005000
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR "432"
+#define CONFIG_SILENT_CONSOLE 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 0c10294..49919fb 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -50,11 +50,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -88,26 +83,32 @@
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_EXT2 | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CFG_LOWBOOT 1
@@ -258,7 +259,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -276,6 +277,11 @@
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 6762cd6..0183041 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -87,13 +87,28 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
- CFG_CMD_IMLS )
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \
- & ~REMOVE_COMMANDS)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_IMLS
+
/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
/* 300000000 */
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 3db2877..7eeae70 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -145,82 +145,50 @@
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
-#ifdef FLASH
- #ifdef RAMENV
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_JFFS2 |\
- CFG_CMD_ECHO |\
- CFG_CMD_IMLS |\
- CFG_CMD_FLASH |\
- CFG_CMD_MFSL |\
- CFG_CMD_PING \
- )
- #else /* !RAMENV */
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_IMLS |\
- CFG_CMD_FLASH |\
- CFG_CMD_PING |\
- CFG_CMD_ENV |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_JFFS2 |\
- CFG_CMD_ECHO |\
- CFG_CMD_MFSL |\
- CFG_CMD_SAVES \
- )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if defined(FLASH)
+ #define CONFIG_CMD_ECHO
+ #define CONFIG_CMD_FLASH
+ #define CONFIG_CMD_IMLS
+ #define CONFIG_CMD_JFFS2
+
+ #if !defined(RAMENV)
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_SAVES
#endif
+#endif
-#else /* !FLASH */
- #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_MISC |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_IRQ |\
- CFG_CMD_ASKENV |\
- CFG_CMD_BDI |\
- CFG_CMD_RUN |\
- CFG_CMD_LOADS |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_LOADB |\
- CFG_CMD_IMI |\
- CFG_CMD_NET |\
- CFG_CMD_CACHE |\
- CFG_CMD_MFSL |\
- CFG_CMD_PING \
- )
-#endif /* !FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
/* JFFS2 partitions */
#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */
#define MTDIDS_DEFAULT "nor0=ml401-0"
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 2028767..4461bdf 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -63,12 +63,23 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
+#define CONFIG_CMD_JFFS2
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.30.2
@@ -81,7 +92,7 @@
#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index e3899a5..e0a827f 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -37,28 +37,35 @@
/*
- * Supported commands
- */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DTT)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
/*
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f24..ea5a44b 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -101,12 +101,18 @@
#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_KEYBOARD 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_AT91C_PQFP_UHPBUG 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME "at91rm9200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#undef CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
@@ -123,40 +129,56 @@
#define CONFIG_BOOTDELAY 3
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_MISC))
-#else
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB | \
- CFG_CMD_CACHE) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
+#if !defined(CONFIG_HARD_I2C)
#define CONFIG_TIMESTAMP
#endif
-#define CFG_LONGHELP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HARD_I2C)
+
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_MISC
+
+#else
+
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_CACHE
+
+ #undef CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_BDI
+ #undef CONFIG_CMD_FPGA
+ #undef CONFIG_CMD_IMI
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_MISC
+
+#endif
+
+
+#define CFG_LONGHELP
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
#define CFG_MEMTEST_START PHYS_SDRAM
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 243a3f6..f4f33f3 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -146,25 +146,34 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
-
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_CACHE \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C \
- | CFG_CMD_SDRAM \
- | CFG_CMD_EEPROM \
- | CFG_CMD_FLASH \
- | CFG_CMD_ENV \
- | CFG_CMD_BSP \
- | CFG_CMD_DHCP \
- | CFG_CMD_PING \
- | CFG_CMD_DATE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+
/*set date in u-boot*/
#define CONFIG_RTC_M48T35A
@@ -182,7 +191,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#else
@@ -366,9 +375,9 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
+#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ }
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -387,7 +396,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 7f3dfd5..5125b21 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -78,25 +78,32 @@
#define CONFIG_BAUDRATE 115200
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- CFG_CMD_REGINFO | \
- CFG_CMD_ELF)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_BOOTFILE "mx1ads"
#define CONFIG_BOOTCOMMAND "tftp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 9816be8..d527d09 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,22 +34,30 @@
#undef _CONFIG_UART4 /* internal uart 4 */
#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- & ~CFG_CMD_LOADS \
- & ~CFG_CMD_CONSOLE \
- & ~CFG_CMD_AUTOSCRIPT \
- & ~CFG_CMD_NET \
- & ~CFG_CMD_PING \
- & ~CFG_CMD_DHCP \
- | CFG_CMD_JFFS2 \
- )
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+
/*
* Boot options. Setting delay to -1 stops autostart count down.
@@ -160,7 +168,7 @@
* Right now there is no gain for user, but later on booting kernel might be
* possible. Consider using XIP kernel running from flash to save RAM
* footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
/*
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 697796a..33159d3 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -140,42 +140,37 @@
#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0"
#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)"
-#if 0
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_IMI | \
- CFG_CMD_LOADB | \
- CFG_CMD_NET | \
- CFG_CMD_MEMORY | \
- CFG_CMD_PING | \
- CFG_CMD_RUN)
-#else
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_NAND | \
- CFG_CMD_IMI | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_LOADB | \
- CFG_CMD_NET | \
- CFG_CMD_MEMORY | \
- CFG_CMD_PING | \
- CFG_CMD_RUN)
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
-#endif
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-#define CONFIG_LOOPW
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_LOOPW
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index 0b1541d..1d691f9 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -69,33 +69,28 @@
#define CONFIG_BAUDRATE 38400
-/***********************************************************
- * Command definition
- ***********************************************************/
-#if 0 /* @TODO */
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF)
-#else
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_BDI | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_LOADB | \
- CFG_CMD_LOADS | \
- CFG_CMD_MEMORY)
-#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 3
/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
@@ -108,7 +103,7 @@
/*#define CONFIG_BOOTFILE "elinos-lart" */
/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 63d0da7..f1d73e4 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -37,11 +37,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -73,8 +68,6 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#define ADD_PCI_CMD CFG_CMD_PCI
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -82,20 +75,29 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- ADD_PCI_CMD )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CFG_LOWBOOT 1
@@ -246,7 +248,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -262,6 +264,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 68e8cec..bc2fd33 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -232,26 +232,38 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -260,7 +272,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -310,7 +322,7 @@
*/
#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -322,7 +334,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 016d3d8..8623ed3 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -86,11 +86,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
#include <configs/omap1510.h>
#define CONFIG_BOOTDELAY 3
@@ -98,7 +111,7 @@
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
#define CFG_AUTOLOAD "n" /* No autoload */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index c6ca689..74bba05 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -81,11 +81,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
#include <configs/omap1510.h>
#define CONFIG_BOOTDELAY 3
@@ -93,7 +106,7 @@
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
#define CFG_AUTOLOAD "n" /* No autoload */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index f28ede0..734f354 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -82,11 +82,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
#include <configs/omap1510.h>
#define CONFIG_BOOTDELAY 3
@@ -98,7 +111,7 @@
#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
#define CONFIG_BOOTFILE "uImage" /* file to load */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 5837461..8ae8efe 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -119,15 +119,34 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifdef CFG_NAND_BOOT
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_NAND
+ #define CONFIG_CMD_JFFS2
#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT)
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_JFFS2
+
+ #undef CONFIG_CMD_AUTOSCRIPT
#endif
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
/*
* Board NAND Info.
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 5db4f52..16ce2f6 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -86,11 +86,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
#include <configs/omap1510.h>
#define CONFIG_BOOTDELAY 3
@@ -102,7 +115,7 @@
#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
#define CONFIG_BOOTFILE "uImage" /* file to load */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index fda55cf..c4d253a 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -90,14 +90,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
/*
- * This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ * Command line configuration.
*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
-#include <cmd_confdefs.h>
#include <configs/omap730.h>
#include <configs/h2_p2_dbg_board.h>
@@ -112,7 +122,7 @@
#define CONFIG_SERVERIP 192.150.0.100
#define CONFIG_BOOTFILE "uImage" /* File to load */
-#if defined (CONFIG_COMMANDS) && defined (CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */
#endif
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 54462f0..8ae38cb 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -251,26 +251,36 @@
#endif
#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_PCI | \
- CFG_CMD_CACHE | \
- CFG_CMD_SDRAM)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_SDRAM
+
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
@@ -280,7 +290,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -421,7 +431,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 22f9f84..51f19a1 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -168,25 +168,37 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -195,7 +207,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -304,7 +316,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -316,7 +328,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index ed1893f..810e0f0 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -132,11 +132,8 @@
/*---USB -------------------------------------------*/
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
-#else
-#define ADD_USB_CMD 0
#endif
/*---ATA PCMCIA ------------------------------------*/
@@ -179,11 +176,36 @@
#define CFG_ICACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
-#define CONFIG_COMMANDS \
- (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \
- ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \
- CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \
- CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD)
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_RUN
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
#endif /* __CONFIG_H */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 751b512..8e51d2d 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -106,19 +106,26 @@
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+#define CONFIG_ENV_OVERWRITE 1
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif /* CFG_ENV_IS_IN_FLASH */
+#define ENV_NAME_REVLEV "revision_level"
+#define ENV_NAME_SOLDER "solder_switch"
+#define ENV_NAME_DIP "dip"
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#undef CONFIG_DDR_ECC /* don't use ECC */
#define SPD_EEPROM_ADDRESS {0x50}
+#define CONFIG_PROG_SDRAM_TLB 1
/*-----------------------------------------------------------------------
* I2C
@@ -143,6 +150,8 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=pcs440ep\0" \
+ "use_eeprom_ethaddr=default\0" \
+ "cs_test=off\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -173,6 +182,36 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+/* check U-Boot image with SHA1 sum */
+#define CONFIG_SHA1_CHECK_UB_IMG 1
+#define CONFIG_SHA1_START CFG_MONITOR_BASE
+#define CONFIG_SHA1_LEN CFG_MONITOR_LEN
+
+/*-----------------------------------------------------------------------
+ * Definitions for status LED
+ */
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED 1
+
+#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */
+#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */
+#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */
+#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE2 STATUS_LED_OFF
+#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */
+#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE3 STATUS_LED_OFF
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -208,37 +247,47 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_USB )
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
-#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_SUPPORT_VFAT
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -393,7 +442,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -405,9 +454,44 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
+
+#define CONFIG_IDE_PREINIT 1
+#define CONFIG_IDE_RESET 1
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_CF1
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET 0
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x0000)
+
+/* These addresses need to be shifted one place to the left
+ * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
+ * These values are shifted
+ */
+#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 73aa3a8..e3c8843 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -89,28 +89,34 @@
* ---------------------------------------------------------------- */
#define CFG_SPI_INIT_OFFSET 0xB00
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK \
- ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 06c6652..5b5b0ef 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -71,25 +71,33 @@
#define CONFIG_BAUDRATE 115200
#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
-#if defined(CONFIG_SCPU)
-#define CMD_NAND_ADD 0
-#else
-#define CMD_NAND_ADD CFG_CMD_NAND
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+
+#if !defined(CONFIG_SCPU)
+#define CONFIG_CMD_NAND
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_NET | \
- CFG_CMD_MII | \
- CMD_NAND_ADD | \
- CFG_CMD_I2C | \
- CFG_CMD_ELF | \
- CFG_CMD_PING)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-/* These are u-boot generic parameters */
-#include <cmd_confdefs.h>
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 7151a9e..18d0c87 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -49,11 +49,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -90,13 +85,6 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif
-
-#define ADD_PCI_CMD CFG_CMD_PCI
-
-#else /* MPC5100 */
-
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
-
#endif
/* Partitions */
@@ -106,26 +94,35 @@
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- ADD_PCI_CMD )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+
+#ifdef CONFIG_MPC5200
+#define CONFIG_CMD_PCI
+#endif
+
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CFG_LOWBOOT 1
@@ -263,7 +260,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -281,6 +278,11 @@
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index a6c2371..863029d 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -66,10 +66,23 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_NET
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -83,7 +96,7 @@
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 072b9dd..fe7de7b 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -25,75 +25,91 @@
/*
* Debug
*
- * DEBUG - Define this is you want extra debug info
- * GTREGREAD - Required to build with debug
- * do_bdinfo - Required to build with debug
+ * DEBUG - Define this is you want extra debug info
+ * GTREGREAD - Required to build with debug
+ * do_bdinfo - Required to build with debug
*/
#undef DEBUG
-#define GTREGREAD(x) 0xFFFFFFFF
+#ifdef DEBUG
+#define GTREGREAD(x) 0xFFFFFFFF
#define do_bdinfo(a,b,c,d)
-
+#endif
/*
* CPU type
*
- * CONFIG_7xx - We have a 750 or 755 CPU
- * CONFIG_74xx - We have a 7400 CPU
- * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
- * CONFIG_BUS_CLK - System bus clock in Hz
+ * CONFIG_7xx - We have a 750 or 755 CPU
+ * CONFIG_74xx - We have a 7400 CPU
+ * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
+ * CONFIG_BUS_CLK - System bus clock in Hz
*/
#define CONFIG_7xx
#undef CONFIG_74xx
#undef CONFIG_ALTIVEC
-#define CONFIG_BUS_CLK 66000000
+#define CONFIG_BUS_CLK 66000000
/*
* Monitor configuration
*
- * CONFIG_COMMANDS - List of command sets to include in shell
+ * List of command sets to include in shell
*
* The following command sets have been tested and known to work:
*
- * CFG_CMD_CACHE - Cache control commands
- * CFG_CMD_MEMORY - Memory display, change and test commands
- * CFG_CMD_FLASH - Erase and program flash
- * CFG_CMD_ENV - Environment commands
- * CFG_CMD_RUN - Run commands stored in env vars
- * CFG_CMD_ELF - Load ELF files
- * CFG_CMD_NET - Networking/file download commands
- * CFG_CMD_PING - ICMP Echo Request command
- * CFG_CMD_PCI - PCI Bus scanning command
+ * CMD_CACHE - Cache control commands
+ * CMD_MEMORY - Memory display, change and test commands
+ * CMD_FLASH - Erase and program flash
+ * CMD_ENV - Environment commands
+ * CMD_RUN - Run commands stored in env vars
+ * CMD_ELF - Load ELF files
+ * CMD_NET - Networking/file download commands
+ * CMD_PIN - ICMP Echo Request command
+ * CMD_PCI - PCI Bus scanning command
*/
-#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \
- CFG_CMD_FLASH | \
- CFG_CMD_ENV | \
- CFG_CMD_RUN | \
- CFG_CMD_ELF | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_PCI)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+
+#undef CONFIG_CMD_KGDB
/*
* Serial configuration
*
* CONFIG_CONS_INDEX - Serial console port number (COM1)
- * CONFIG_BAUDRATE - Serial speed
+ * CONFIG_BAUDRATE - Serial speed
*/
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
/*
* PCI config
*
- * CONFIG_PCI - Enable PCI bus
- * CONFIG_PCI_PNP - Enable Plug & Play support
+ * CONFIG_PCI - Enable PCI bus
+ * CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
*/
@@ -105,9 +121,9 @@
/*
* Network config
*
- * CONFIG_NET_MULTI - Support for multiple network interfaces
- * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
- * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
+ * CONFIG_NET_MULTI - Support for multiple network interfaces
+ * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
+ * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
*/
#define CONFIG_NET_MULTI
@@ -130,7 +146,7 @@
* Boot config
*
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
- * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
+ * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
#define CONFIG_BOOTCOMMAND \
@@ -149,87 +165,84 @@
*/
-#include <cmd_confdefs.h>
-
-
/*
* Memory map
*
* This board runs in a standard CHRP (Map-B) configuration.
*
- * Type Start End Size Width Chip Sel
+ * Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
- * User LED's 0x78000000 RCS3
- * UART 0x7C000000 RCS2
- * Mailbox 0xFF000000 RCS1
- * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
+ * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
+ * User LED's 0x78000000 RCS3
+ * UART 0x7C000000 RCS2
+ * Mailbox 0xFF000000 RCS1
+ * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
*
* Flash sectors are laid out as follows.
*
- * Sector Start End Size Comments
+ * Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
- * 0 0xFFC00000 0xFFC3FFFF 256KB
- * 1 0xFFC40000 0xFFC7FFFF 256KB
- * 2 0xFFC80000 0xFFCBFFFF 256KB
- * 3 0xFFCC0000 0xFFCFFFFF 256KB
- * 4 0xFFD00000 0xFFD3FFFF 256KB
- * 5 0xFFD40000 0xFFD7FFFF 256KB
- * 6 0xFFD80000 0xFFDBFFFF 256KB
- * 7 0xFFDC0000 0xFFDFFFFF 256KB
- * 8 0xFFE00000 0xFFE3FFFF 256KB
- * 9 0xFFE40000 0xFFE7FFFF 256KB
- * 10 0xFFE80000 0xFFEBFFFF 256KB
- * 11 0xFFEC0000 0xFFEFFFFF 256KB
- * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
- * 13 0xFFF40000 0xFFF7FFFF 256KB
- * 14 0xFFF80000 0xFFFBFFFF 256KB
- * 15 0xFFFC0000 0xFFFDFFFF 128KB
- * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
- * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
- * 18 0xFFFF0000 0xFFFFFFFF 64KB
+ * 0 0xFFC00000 0xFFC3FFFF 256KB
+ * 1 0xFFC40000 0xFFC7FFFF 256KB
+ * 2 0xFFC80000 0xFFCBFFFF 256KB
+ * 3 0xFFCC0000 0xFFCFFFFF 256KB
+ * 4 0xFFD00000 0xFFD3FFFF 256KB
+ * 5 0xFFD40000 0xFFD7FFFF 256KB
+ * 6 0xFFD80000 0xFFDBFFFF 256KB
+ * 7 0xFFDC0000 0xFFDFFFFF 256KB
+ * 8 0xFFE00000 0xFFE3FFFF 256KB
+ * 9 0xFFE40000 0xFFE7FFFF 256KB
+ * 10 0xFFE80000 0xFFEBFFFF 256KB
+ * 11 0xFFEC0000 0xFFEFFFFF 256KB
+ * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
+ * 13 0xFFF40000 0xFFF7FFFF 256KB
+ * 14 0xFFF80000 0xFFFBFFFF 256KB
+ * 15 0xFFFC0000 0xFFFDFFFF 128KB
+ * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
+ * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
+ * 18 0xFFFF0000 0xFFFFFFFF 64KB
*/
/*
* SDRAM config - see memory map details above.
*
- * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
- * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
+ * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
+ * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 0x04000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 0x04000000
/*
* Flash config - see memory map details above.
*
- * CFG_FLASH_BASE - Start address of flash memory
- * CFG_FLASH_SIZE - Total size of contiguous flash mem
+ * CFG_FLASH_BASE - Start address of flash memory
+ * CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_ERASE_TOUT - Erase timeout in ms
* CFG_FLASH_WRITE_TOUT - Write timeout in ms
* CFG_MAX_FLASH_BANKS - Number of banks of flash on board
* CFG_MAX_FLASH_SECT - Number of sectors in a bank
*/
-#define CFG_FLASH_BASE 0xFFC00000
-#define CFG_FLASH_SIZE 0x00400000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_FLASH_SIZE 0x00400000
#define CFG_FLASH_ERASE_TOUT 250000
#define CFG_FLASH_WRITE_TOUT 5000
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 19
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 19
/*
* Monitor config - see memory map details above
*
- * CFG_MONITOR_BASE - Base address of monitor code
- * CFG_MALLOC_LEN - Size of malloc pool (128KB)
+ * CFG_MONITOR_BASE - Base address of monitor code
+ * CFG_MALLOC_LEN - Size of malloc pool (128KB)
*/
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MALLOC_LEN 0x20000
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_LEN 0x20000
/*
@@ -247,16 +260,16 @@
* CFG_PROMPT - Prompt string
*/
-#define CFG_BARGSIZE 1024
-#define CFG_BOOTMAPSZ 0x800000
-#define CFG_CBSIZE 1024
-#define CFG_LOAD_ADDR 0x100000
+#define CFG_BARGSIZE 1024
+#define CFG_BOOTMAPSZ 0x800000
+#define CFG_CBSIZE 1024
+#define CFG_LOAD_ADDR 0x100000
#define CFG_LONGHELP
-#define CFG_MAXARGS 16
-#define CFG_MEMTEST_START 0x00040000
-#define CFG_MEMTEST_END 0x00040100
-#define CFG_PBSIZE 1024
-#define CFG_PROMPT "=> "
+#define CFG_MAXARGS 16
+#define CFG_MEMTEST_START 0x00040000
+#define CFG_MEMTEST_END 0x00040100
+#define CFG_PBSIZE 1024
+#define CFG_PROMPT "=> "
/*
@@ -268,12 +281,12 @@
* CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
*/
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR 0xFFFE0000
-#define CFG_ENV_SIZE 0x1000
-#define CFG_ENV_ADDR_REDUND 0xFFFE8000
-#define CFG_ENV_SIZE_REDUND 0x1000
-#define CFG_ENV_SECT_SIZE 0x8000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFFE0000
+#define CFG_ENV_SIZE 0x1000
+#define CFG_ENV_ADDR_REDUND 0xFFFE8000
+#define CFG_ENV_SIZE_REDUND 0x1000
+#define CFG_ENV_SECT_SIZE 0x8000
/*
@@ -284,15 +297,15 @@
* copied to top of RAM by the init code.
*
* CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect
- * CFG_INIT_RAM_END - Size of Init RAM
+ * CFG_INIT_RAM_END - Size of Init RAM
* CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
* CFG_GBL_DATA_OFFSET - Start of global data, top of stack
*/
-#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000)
-#define CFG_INIT_RAM_END 0x4000
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000)
+#define CFG_INIT_RAM_END 0x4000
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*
@@ -329,71 +342,71 @@
* Cache config
*
* CFG_CACHELINE_SIZE - Size of a cache line (CPU specific)
- * CFG_L2 - L2 cache enabled if defined
- * L2_INIT - L2 cache init flags
- * L2_ENABLE - L2 cache enable flags
+ * CFG_L2 - L2 cache enabled if defined
+ * L2_INIT - L2 cache init flags
+ * L2_ENABLE - L2 cache enable flags
*/
-#define CFG_CACHELINE_SIZE 32
+#define CFG_CACHELINE_SIZE 32
#undef CFG_L2
-#define L2_INIT 0
-#define L2_ENABLE 0
+#define L2_INIT 0
+#define L2_ENABLE 0
/*
* Clocks config
*
- * CFG_BUS_HZ - Bus clock frequency in Hz
- * CFG_BUS_CLK - As above (?)
- * CFG_HZ - Decrementer freq in Hz
+ * CFG_BUS_HZ - Bus clock frequency in Hz
+ * CFG_BUS_CLK - As above (?)
+ * CFG_HZ - Decrementer freq in Hz
*/
-#define CFG_BUS_HZ CONFIG_BUS_CLK
-#define CFG_BUS_CLK CONFIG_BUS_CLK
-#define CFG_HZ 1000
+#define CFG_BUS_HZ CONFIG_BUS_CLK
+#define CFG_BUS_CLK CONFIG_BUS_CLK
+#define CFG_HZ 1000
/*
* Serial port config
*
* CFG_BAUDRATE_TABLE - List of valid baud rates
- * CFG_NS16550 - Include the NS16550 driver
+ * CFG_NS16550 - Include the NS16550 driver
* CFG_NS16550_SERIAL - Include the serial (wrapper) driver
- * CFG_NS16550_CLK - Frequency of reference clock
+ * CFG_NS16550_CLK - Frequency of reference clock
* CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
- * CFG_NS16550_COM1 - Base address of 1st serial port
+ * CFG_NS16550_COM1 - Base address of 1st serial port
*/
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_CLK 3686400
+#define CFG_NS16550_CLK 3686400
#define CFG_NS16550_REG_SIZE -8
-#define CFG_NS16550_COM1 0x7C000000
+#define CFG_NS16550_COM1 0x7C000000
/*
* PCI Config - Address Map B (CHRP)
*/
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x40000000
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS 0x80000000
-#define CFG_PCI_MEM_SIZE 0x7D000000
-#define CFG_ISA_MEM_BUS 0x00000000
-#define CFG_ISA_MEM_PHYS 0xFD000000
-#define CFG_ISA_MEM_SIZE 0x01000000
-#define CFG_PCI_IO_BUS 0x00800000
-#define CFG_PCI_IO_PHYS 0xFE800000
-#define CFG_PCI_IO_SIZE 0x00400000
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0xFE000000
-#define CFG_ISA_IO_SIZE 0x00800000
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x40000000
+#define CFG_PCI_MEM_BUS 0x80000000
+#define CFG_PCI_MEM_PHYS 0x80000000
+#define CFG_PCI_MEM_SIZE 0x7D000000
+#define CFG_ISA_MEM_BUS 0x00000000
+#define CFG_ISA_MEM_PHYS 0xFD000000
+#define CFG_ISA_MEM_SIZE 0x01000000
+#define CFG_PCI_IO_BUS 0x00800000
+#define CFG_PCI_IO_PHYS 0xFE800000
+#define CFG_PCI_IO_SIZE 0x00400000
+#define CFG_ISA_IO_BUS 0x00000000
+#define CFG_ISA_IO_PHYS 0xFE000000
+#define CFG_ISA_IO_SIZE 0x00800000
#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+#define CFG_ISA_IO CFG_ISA_IO_PHYS
+#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
/*
@@ -408,12 +421,12 @@
/*
* Boot flags
*
- * BOOTFLAG_COLD - Indicates a power-on boot
- * BOOTFLAG_WARM - Indicates a software reset
+ * BOOTFLAG_COLD - Indicates a power-on boot
+ * BOOTFLAG_WARM - Indicates a software reset
*/
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
+#define BOOTFLAG_COLD 0x01
+#define BOOTFLAG_WARM 0x02
#endif /* __CONFIG_H */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index d671dcc..fb5ae99 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -169,8 +169,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
@@ -261,13 +260,17 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_NFS */
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS
+
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
+
/* undef this to save memory */
#define CFG_LONGHELP
@@ -275,14 +278,20 @@
/* Monitor Command Prompt */
#define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */
-#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_REGINFO | \
- CFG_CMD_MEMTEST | \
- CFG_CMD_MII | \
- CFG_CMD_IMMAP)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_IMMAP
+
+#undef CONFIG_CMD_KGDB
/* Where do the internal registers live? */
@@ -298,13 +307,10 @@
#define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -477,7 +483,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/purple.h b/include/configs/purple.h
index 2ecb7fb..6eb618e 100644
--- a/include/configs/purple.h
+++ b/include/configs/purple.h
@@ -81,8 +81,23 @@
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+
#define CFG_SDRAM_BASE 0x80000000
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index e5e2772..0e884fc 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -102,10 +102,25 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DHCP
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "bootm 40000"
@@ -192,7 +207,7 @@
/* "protect off" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index 21ec5ac..f49e2b0 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -92,18 +92,28 @@
#define CFG_NVRAM_SIZE 2048
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
@@ -113,7 +123,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -172,7 +182,7 @@
#endif
/*%%% #define CFG_FLASH_BASE 0xFFF00000 */
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -222,7 +232,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/r5200.h b/include/configs/r5200.h
index e1e406b..0e743bb 100644
--- a/include/configs/r5200.h
+++ b/include/configs/r5200.h
@@ -66,10 +66,27 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB))
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+
/* Note: We only copy one sectors worth of application code from location
* 10200000 for speed purposes. Increase the size if necessary */
@@ -79,7 +96,7 @@
#define CFG_PROMPT "u-boot> "
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index b319cf4..2ca60b7 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -87,17 +87,28 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
@@ -108,7 +119,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -152,7 +163,7 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE (0-flash_info[0].size) /* Put flash at end */
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -193,7 +204,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 6c9e392..814082c 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -64,8 +64,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
@@ -102,7 +101,23 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_KGDB)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_KGDB
+
/* Define this if you want to boot from 0x00000100. If you don't define
* this, you will need to program the bootloader to 0xfff00000, and
@@ -112,15 +127,12 @@
*/
#define CFG_RSD_BOOT_LOW 1
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOTARGS "devfs=mount root=ramfs"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5a
#define CONFIG_NETMASK 255.255.0.0
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -130,7 +142,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -287,7 +299,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 97b52fa..c474acd 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -159,8 +159,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
@@ -470,16 +469,18 @@
#define CONFIG_BOOTP_RANDOM_DELAY /* Randomize the BOOTP retry delay */
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS (up to 2 servers)
- * - Send hostname to DHCP server
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
/* undef this to save memory */
#define CFG_LONGHELP
@@ -502,31 +503,28 @@
*/
#define CONFIG_VERSION_VARIABLE
-/* What U-Boot subsytems do you want enabled? */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_KGDB
+
#ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_I2C | \
- CFG_CMD_SPI | \
- CFG_CMD_SDRAM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_PING | \
- CFG_CMD_MII )
-#else
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_I2C | \
- CFG_CMD_SPI | \
- CFG_CMD_SDRAM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_PING )
-#endif /* CONFIG_ETHER_ON_FCC */
+#define CONFIG_CMD_MII
+#endif
+
/* Where do the internal registers live? */
#define CFG_IMMR 0xF0000000
@@ -544,10 +542,6 @@
#define CONFIG_SACSng 1 /* munged for the SACSng */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-
/*
* Miscellaneous configurable options
*/
@@ -589,7 +583,7 @@
#define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */
/* before it gives up. */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -732,7 +726,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 866f7b0..b4a063a 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -82,24 +82,29 @@
#define CONFIG_BAUDRATE 115200
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
@@ -110,7 +115,7 @@
/*#define CONFIG_BOOTFILE "elinos-lart" */
#define CONFIG_BOOTCOMMAND "dhcp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
@@ -193,7 +198,7 @@
/*-----------------------------------------------------------------------
* NAND flash settings
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
@@ -219,7 +224,7 @@
#define NAND_CTL_CLRCLE(nandptr)
#define NAND_CTL_SETCLE(nandptr)
/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index beff28a..dc906b1 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -84,23 +84,33 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- 0 )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -123,7 +133,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -229,7 +239,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index d891e07..0e878f0 100644
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -75,24 +75,33 @@
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- 0 )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
/*
* Miscellaneous configurable options
@@ -340,7 +349,7 @@ typedef unsigned int led_id_t;
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 9cf0654..b1d41a6 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -182,8 +182,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
@@ -412,16 +411,18 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_NFS */
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS (up to 2 servers)
- * - Send hostname to DHCP server
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
/* undef this to save memory */
#define CFG_LONGHELP
@@ -444,27 +445,26 @@
*/
#define CONFIG_VERSION_VARIABLE
-/* What U-Boot subsytems do you want enabled? */
-#ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-#else
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-#endif /* CONFIG_ETHER_ON_FCC */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#undef CONFIG_CMD_KGDB
+
+#if defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_CMD_MII
+#endif
+
#undef CONFIG_WATCHDOG /* disable the watchdog */
@@ -481,13 +481,11 @@
#define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -627,7 +625,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e6e3866..1831bef 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -328,7 +328,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C1_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
#define CFG_I2C_OFFSET CFG_I2C2_OFFSET
@@ -439,40 +439,34 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#endif
-#else
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII \
- )
+ #define CONFG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -483,7 +477,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -504,7 +498,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -655,7 +649,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 6e4fdb2..defc428 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -320,28 +320,37 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_MII
+#endif
+
#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV))
- #endif
-#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C)
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -350,7 +359,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -371,7 +380,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -383,7 +392,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
new file mode 100644
index 0000000..68d31ca
--- /dev/null
+++ b/include/configs/sbc8641d.h
@@ -0,0 +1,604 @@
+/*
+ * Copyright 2007 Wind River Systems <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ * Joe Hamman <joe.hamman@embeddedspecialties.com>
+ *
+ * Copyright 2006 Freescale Semiconductor.
+ *
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * SBC8641D board configuration file
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx 1 /* MPC86xx */
+#define CONFIG_MPC8641 1 /* MPC8641 specific */
+#define CONFIG_SBC8641D 1 /* SBC8641D board specific */
+#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR 0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS 0xfff00100
+
+#define CONFIG_PCI 1 /* Enable PCIE */
+#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/
+#undef CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CACHE_LINE_INTERLEAVING 0x20000000
+#define PAGE_INTERLEAVING 0x21000000
+#define BANK_INTERLEAVING 0x22000000
+#define SUPER_BANK_INTERLEAVING 0x23000000
+
+
+#define CONFIG_ALTIVEC 1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT 0
+#define L2_ENABLE (L2CR_L2E)
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
+#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+ /*
+ * Determine DDR configuration from I2C interface.
+ */
+ #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */
+
+#else
+ /*
+ * Manually set up DDR1 & DDR2 parameters
+ */
+
+ #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
+
+ #define CFG_DDR_CS0_BNDS 0x0000000F
+ #define CFG_DDR_CS1_BNDS 0x00000000
+ #define CFG_DDR_CS2_BNDS 0x00000000
+ #define CFG_DDR_CS3_BNDS 0x00000000
+ #define CFG_DDR_CS0_CONFIG 0x80010102
+ #define CFG_DDR_CS1_CONFIG 0x00000000
+ #define CFG_DDR_CS2_CONFIG 0x00000000
+ #define CFG_DDR_CS3_CONFIG 0x00000000
+ #define CFG_DDR_EXT_REFRESH 0x00000000
+ #define CFG_DDR_TIMING_0 0x00220802
+ #define CFG_DDR_TIMING_1 0x38377322
+ #define CFG_DDR_TIMING_2 0x002040c7
+ #define CFG_DDR_CFG_1A 0x43008008
+ #define CFG_DDR_CFG_2 0x24401000
+ #define CFG_DDR_MODE_1 0x23c00542
+ #define CFG_DDR_MODE_2 0x00000000
+ #define CFG_DDR_MODE_CTL 0x00000000
+ #define CFG_DDR_INTERVAL 0x05080100
+ #define CFG_DDR_DATA_INIT 0x00000000
+ #define CFG_DDR_CLK_CTRL 0x03800000
+ #define CFG_DDR_CFG_1B 0xC3008008
+
+ #define CFG_DDR2_CS0_BNDS 0x0010001F
+ #define CFG_DDR2_CS1_BNDS 0x00000000
+ #define CFG_DDR2_CS2_BNDS 0x00000000
+ #define CFG_DDR2_CS3_BNDS 0x00000000
+ #define CFG_DDR2_CS0_CONFIG 0x80010102
+ #define CFG_DDR2_CS1_CONFIG 0x00000000
+ #define CFG_DDR2_CS2_CONFIG 0x00000000
+ #define CFG_DDR2_CS3_CONFIG 0x00000000
+ #define CFG_DDR2_EXT_REFRESH 0x00000000
+ #define CFG_DDR2_TIMING_0 0x00220802
+ #define CFG_DDR2_TIMING_1 0x38377322
+ #define CFG_DDR2_TIMING_2 0x002040c7
+ #define CFG_DDR2_CFG_1A 0x43008008
+ #define CFG_DDR2_CFG_2 0x24401000
+ #define CFG_DDR2_MODE_1 0x23c00542
+ #define CFG_DDR2_MODE_2 0x00000000
+ #define CFG_DDR2_MODE_CTL 0x00000000
+ #define CFG_DDR2_INTERVAL 0x05080100
+ #define CFG_DDR2_DATA_INIT 0x00000000
+ #define CFG_DDR2_CLK_CTRL 0x03800000
+ #define CFG_DDR2_CFG_1B 0xC3008008
+
+
+#endif
+
+/* #define CFG_ID_EEPROM 1
+#define ID_EEPROM_ADDR 0x57 */
+
+/*
+ * The SBC8641D contains 16MB flash space at ff000000.
+ */
+#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
+
+/* Flash */
+#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */
+#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */
+
+/* 64KB EEPROM */
+#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */
+#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */
+
+/* EPLD - User switches, board id, LEDs */
+#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */
+#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */
+
+/* Local bus SDRAM 128MB */
+#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */
+#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */
+#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */
+#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */
+
+/* Disk on Chip (DOC) 128MB */
+#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */
+#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */
+
+/* LCD */
+#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */
+#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
+
+/* Control logic & misc peripherals */
+#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */
+#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 131 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_WRITE_SWAPPED_DATA
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_PROTECTION
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8641@0"
+#define OF_SOC "soc@f8000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc@f8000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF 1
+#define CFG_64BIT_STRTOUL 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3100
+
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
+#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0xe2000000
+#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+#define CFG_PCI2_MEM_BASE 0xa0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI2_IO_BASE 0xe3000000
+#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
+#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#undef CFG_SCSI_SCAN_BUS_REVERSE
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CONFIG_DOS_PARTITION
+#undef CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID 4
+#define CFG_SCSI_MAX_LUN 1
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/* #define CONFIG_MII 1 */ /* MII PHY management */
+
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+#define CONFIG_TSEC4 1
+#define CONFIG_TSEC4_NAME "eTSEC4"
+
+#define TSEC1_PHY_ADDR 0x1F
+#define TSEC2_PHY_ADDR 0x00
+#define TSEC3_PHY_ADDR 0x01
+#define TSEC4_PHY_ADDR 0x02
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+#define TSEC4_PHYIDX 0
+
+#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * BAT0 2G Cacheable, non-guarded
+ * 0x0000_0000 2G DDR
+ */
+#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U CFG_DBAT0U
+
+/*
+ * BAT1 1G Cache-inhibited, guarded
+ * 0x8000_0000 512M PCI-Express 1 Memory
+ * 0xa000_0000 512M PCI-Express 2 Memory
+ * Changed it for operating from 0xd0000000
+ */
+#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U CFG_DBAT1U
+
+/*
+ * BAT2 512M Cache-inhibited, guarded
+ * 0xc000_0000 512M RapidIO Memory
+ */
+#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U CFG_DBAT2U
+
+/*
+ * BAT3 4M Cache-inhibited, guarded
+ * 0xf800_0000 4M CCSR
+ */
+#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U CFG_DBAT3U
+
+/*
+ * BAT4 32M Cache-inhibited, guarded
+ * 0xe200_0000 16M PCI-Express 1 I/O
+ * 0xe300_0000 16M PCI-Express 2 I/0
+ * Note that this is at 0xe0000000
+ */
+#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U CFG_DBAT4U
+
+/*
+ * BAT5 128K Cacheable, non-guarded
+ * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L CFG_DBAT5L
+#define CFG_IBAT5U CFG_DBAT5U
+
+/*
+ * BAT6 32M Cache-inhibited, guarded
+ * 0xfe00_0000 32M FLASH
+ */
+#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U CFG_DBAT6U
+
+#define CFG_DBAT7L 0x00000000
+#define CFG_DBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
+#define CFG_IBAT7U 0x00000000
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#include <config_cmd_default.h>
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 02:E0:0C:00:00:01
+#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
+#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
+#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_HAS_ETH2 1
+#define CONFIG_HAS_ETH3 1
+
+#define CONFIG_IPADDR 192.168.0.50
+
+#define CONFIG_HOSTNAME sbc8641d
+#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_SERVERIP 192.168.0.2
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK 255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=uRamdisk\0" \
+ "dtbaddr=400000\0" \
+ "dtbfile=sbc8641d.dtb\0" \
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=1"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_FLASHBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "bootm ffd00000 ffb00000 ffa00000"
+
+#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index e4357b0..cb22536 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -68,8 +68,7 @@
* Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
* If undefined, IDE access uses a seperat emulation with higher access speed.
* Consider to inform your Linux IDE driver about the different addresses!
- * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes
- * the CFG_CMD_IDE macro!
+ * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE!
*/
#define IDE_USES_ISA_EMULATION
@@ -169,25 +168,36 @@
#define CONFIG_MII 1 /* add 405GP MII PHY management */
#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_NET | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_NAND | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_CACHE | \
- CFG_CMD_ELF )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -277,7 +287,7 @@
* External peripheral base address
*-----------------------------------------------------------------------
*/
-#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if !defined(CONFIG_CMD_IDE)
#undef CONFIG_IDE_LED /* no led for ide supported */
#undef CONFIG_IDE_RESET /* no reset for ide supported */
@@ -286,7 +296,7 @@
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
-#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#else
#define CONFIG_START_IDE 1 /* check, if use IDE */
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
@@ -346,7 +356,7 @@
#endif /* IDE_USES_ISA_EMULATION */
-#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#endif
/*
#define CFG_KEY_REG_BASE_ADDR 0xF0100000
@@ -437,7 +447,7 @@ extern unsigned long offsetOfEnvironment;
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 8b2ec07..8491d97 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -64,24 +64,37 @@
*/
#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
-
#define CONFIG_BAUDRATE 9600
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
#define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
/* #define CONFIG_BOOTCOMMAND "bootm 38000000" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-
/*
* Miscellaneous configurable options
*/
@@ -104,7 +117,6 @@
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
@@ -113,8 +125,6 @@
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
-
#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
@@ -125,11 +135,9 @@
#define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */
#define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-
/* Environment in EEPROM */
#define CFG_ENV_IS_IN_EEPROM 1
#define CONFIG_SPI
@@ -209,7 +217,6 @@
#define CONFIG_I8042_KBD
#define CFG_ISA_IO 0
-
/************************************************************
* RTC
***********************************************************/
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index a8e3555..c6f7f15 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -64,16 +64,34 @@
#define CONFIG_BAUDRATE 9600
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_EEPROM
+
#define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index a4249c4..d140241 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -36,20 +36,27 @@
/*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- & ~CFG_CMD_LOADS \
- & ~CFG_CMD_CONSOLE \
- & ~CFG_CMD_AUTOSCRIPT \
- | CFG_CMD_NET \
- | CFG_CMD_PING \
- | CFG_CMD_DHCP \
- )
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
-#include <cmd_confdefs.h>
/*
* Boot options. Setting delay to -1 stops autostart count down.
@@ -182,7 +189,7 @@
* Right now there is no gain for user, but later on booting kernel might be
* possible. Consider using XIP kernel running from flash to save RAM
* footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_FIRST_SECTOR 5
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 3219992..3f75a44 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -299,9 +299,6 @@
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
-#define CMD_USB CFG_CMD_USB
-#else
-#define CMD_USB 0 /* no USB on 440GRx */
#endif /* CONFIG_440EPX */
/* Partitions */
@@ -309,25 +306,43 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DTT | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
+
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
@@ -347,15 +362,12 @@
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -445,7 +457,7 @@
*----------------------------------------------------------------------*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -457,7 +469,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 572985b..c1fa53f 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -66,21 +66,28 @@
#define CONFIG_BAUDRATE 115200
-#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_IDE)
-#endif /* 0 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_BOOTCOMMAND "help"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index a137f9d..05f6053 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -86,24 +86,32 @@
/* Use s3c2400's RTC */
#define CONFIG_RTC_S3C24X0 1
-#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
- CFG_CMD_DATE | \
- CFG_CMD_SNTP )
-#else
-#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_SNTP )
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HWFLOW)
+ #define CONFIG_CONFIG_HWFLOW
#endif
-#ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW)
-#else
-#define CONFIG_COMMANDS CONFIG_COMMANDS_tmp
+#if !defined(USE_920T_MMU)
+ #undef CONFIG_CMD_CACHE
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#if 0
@@ -118,7 +126,7 @@
#define CONFIG_BOOTCOMMAND "tftp; bootm"
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7edec0d..ca404ff 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -72,22 +72,26 @@
#define CONFIG_BAUDRATE 115200
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+
#define CONFIG_BOOTDELAY 3
/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
@@ -98,7 +102,7 @@
/*#define CONFIG_BOOTFILE "elinos-lart" */
/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 185c2d4..ad68c75 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -42,11 +42,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -65,33 +60,41 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -319,7 +322,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -338,9 +341,13 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 4937638..fe014ea 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -39,12 +39,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -69,30 +63,35 @@
#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS
#define CONFIG_PCI_CFG_SIZE 0x01000000
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP | \
- 0)
-
-/* CFG_CMD_MII | \ */
-/* CFG_CMD_USB | \ */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
/*
* Default Environment
@@ -268,7 +267,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -284,6 +283,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 09bbebd..b4ab9ad 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -80,24 +80,33 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_DATE \
- | CFG_CMD_ECHO \
- | CFG_CMD_IMMAP \
- | CFG_CMD_JFFS2 \
- | CFG_CMD_PING \
- | CFG_CMD_DHCP \
- | CFG_CMD_I2C \
- | CFG_CMD_MII)
- /* & ~( CFG_CMD_NET)) */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
-#endif /* !CONFIG_COMMANDS */
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -107,7 +116,7 @@
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -194,7 +203,7 @@
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#ifdef CFG_CMD_DATE
+#ifdef CONFIG_CMD_DATE
# define CONFIG_RTC_DS3231
# define CFG_I2C_RTC_ADDR 0x68
#endif
@@ -202,7 +211,7 @@
/*-----------------------------------------------------------------------
* I2C configuration
*/
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 9888d11..4b618f3 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,11 +44,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -88,12 +83,6 @@
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
-#ifdef CONFIG_PCI
-#define ADD_PCI_CMD CFG_CMD_PCI
-#else
-#define ADD_PCI_CMD 0
-#endif
-
/*
* Video console
*/
@@ -110,12 +99,6 @@
#define CFG_CONSOLE_IS_IN_ENV
#endif
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD 0
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -124,10 +107,7 @@
/* USB */
#ifdef CONFIG_STK52XX
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
#endif
/* POST support */
@@ -136,43 +116,60 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
-/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
-#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
-#else
-#define ADD_IDE_CMD 0
-#endif
/*
- * Supported commands
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- ADD_IDE_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
+ #define CONFIG_CMD_IDE
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_STK52XX
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_FAT
+#endif
+
+#ifdef CONFIG_VIDEO
+ #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_PCI
+ #define CONFIG_CMD_PCI
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -406,7 +403,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -425,9 +422,13 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 21065b9..1f41cf7 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -298,34 +298,38 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \
- CFG_CMD_MII | CFG_CMD_I2C ) & \
- ~(CFG_CMD_ENV))
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV))
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \
- CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
- #endif
+ #define CONFIG_CMD_ELF
+#endif
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
#endif
-#include <cmd_confdefs.h>
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_MII
+#endif
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -334,7 +338,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "GPPP=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -355,7 +359,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -367,7 +371,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 2e527b2..55e2c8d 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -325,34 +325,39 @@
#define CONFIG_TIMESTAMP /* Print image info with ts */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_MII
+#endif
+
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \
- CFG_CMD_MII | CFG_CMD_I2C ) & \
- ~(CFG_CMD_ENV))
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_PING | CFG_CMD_I2C) & \
- ~(CFG_CMD_ENV))
- #endif
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
- CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
- #elif defined(CONFIG_TSEC_ENET)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \
- CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
- #elif defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
- CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
- #endif
+ #define CONFIG_CMD_ELF
#endif
-#include <cmd_confdefs.h>
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -361,7 +366,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "SSA=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -382,7 +387,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -394,7 +399,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 614a046..0dbf4b7 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -77,7 +77,16 @@
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_NISDOMAIN
+
#undef CONFIG_MAC_PARTITION
#undef CONFIG_DOS_PARTITION
@@ -100,19 +109,22 @@
#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_NAND | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_MII | \
- CFG_CMD_NFS)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -122,7 +134,7 @@
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -213,7 +225,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 8224555..08ac9cb 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -55,10 +55,21 @@
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
-#define CONFIG_COMMANDS (CONFIG__CMD_DFL)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 92ee8cb..3b90f3c 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -125,22 +125,32 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DOC | \
-/* CFG_CMD_IDE |*/ \
- CFG_CMD_DATE )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_DATE
+
+
#define CFG_NAND_LEGACY
/*
@@ -153,7 +163,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -246,7 +256,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
new file mode 100644
index 0000000..d623e56
--- /dev/null
+++ b/include/configs/taihu.h
@@ -0,0 +1,476 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2005-2007
+ * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+#define CONFIG_405EP 1 /* this is a PPC405 CPU */
+#define CONFIG_4xx 1 /* member of PPC4xx family */
+#define CONFIG_TAIHU 1 /* on a taihu board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_NO_SERIAL_EEPROM
+
+/*----------------------------------------------------------------------------*/
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*
+!-------------------------------------------------------------------------------
+! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI,
+! assuming a 33MHz input clock to the 405EP from the C9531.
+!-------------------------------------------------------------------------------
+*/
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_37
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_37
+#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111
+
+#endif
+/*----------------------------------------------------------------------------*/
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootfile=/tftpboot/taihu/uImage\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC180000\0" \
+ "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \
+ "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
+ "cp.b 200000 FFFC0000 40000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x14 /* PHY address */
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SPI
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */
+#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
+#define CFG_SDRAM_BANKS 2
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_UART1_CONSOLE 1
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+
+#define CONFIG_SOFT_SPI
+#define SPI_SCL spi_scl
+#define SPI_SDA spi_sda
+#define SPI_READ spi_read()
+#define SPI_DELAY udelay(2)
+#ifndef __ASSEMBLY__
+void spi_scl(int);
+void spi_sda(int);
+unsigned char spi_read(void);
+#endif
+
+/* standard dtt sensor configuration */
+#define CONFIG_DTT_DS1775 1
+#define CONFIG_DTT_SENSORS { 0 }
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_EEPRO100 1
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFE00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2aa
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * PPC405 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \
+} \
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash/SRAM) initialization */
+#define CFG_EBC_PB0AP 0x03815600
+#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NVRAM/RTC) initialization */
+#define CFG_EBC_PB1AP 0x05815600
+#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (USB device) initialization */
+#define CFG_EBC_PB2AP 0x03016600
+#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (LCM and D-flip-flop) initialization */
+#define CFG_EBC_PB3AP 0x158FF600
+#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (not install) initialization */
+#define CFG_EBC_PB4AP 0x158FF600
+#define CFG_EBC_PB4CR 0x5021A000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */
+#define CFG_GPIO0_ISR1L 0x15545440
+#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */
+#define CFG_GPIO0_ODR 0x00000000 /* open drain */
+
+#define GPIO0 0 /* GPIO controller 0 */
+
+/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */
+
+#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE)
+#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE)
+#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE)
+
+#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */
+#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */
+#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */
+#define GPIO_IS2(x) (x+GPIOx_IS1L)
+#define GPIO_IS3(x) (x+GPIOx_IS1L)
+
+#define CPLD_REG0_ADDR 0x50100000
+#define CPLD_REG1_ADDR 0x50100001
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index d756be7..baa4fbd 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -234,27 +234,36 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-/*-----------------------------------------------------------------------
- * Console/Commands/Parser
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_DTT | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -263,7 +272,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -315,7 +324,7 @@
*----------------------------------------------------------------------*/
#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -327,7 +336,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index dac1eb7..a21af21 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -87,13 +87,27 @@
/*#define CONFIG_BOOTCOMMAND "run flash_local" */
#define CONFIG_BOOTCOMMAND "run netboot"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_PCI | \
- CFG_CMD_ELF )
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_ELF
+
/*
* Miscellaneous configurable options
diff --git a/include/configs/trab.h b/include/configs/trab.h
index a2dc8e7..dbccea2 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -80,10 +80,17 @@
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
/* USB stuff */
-#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+
+#define CFG_USB_OHCI_REGS_BASE 0x14200000
+#define CFG_USB_OHCI_SLOT_NAME "s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
/*
* Size of malloc() pool
*/
@@ -130,60 +137,50 @@
/* Use s3c2400's RTC */
#define CONFIG_RTC_S3C24X0 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
#ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW
-#else
-#define CONFIG_COMMANDS_ADD_HWFLOW 0
+ #define CONFIG_CMD_HWFLOW
#endif
#ifdef CONFIG_VFD
-#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD
-#else
-#define CONFIG_COMMANDS_ADD_VFD 0
+ #define CONFIG_CMD_VFD
#endif
#ifdef CONFIG_DRIVER_S3C24X0_I2C
-#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM
-#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS_ADD_EEPROM 0
-#define CONFIG_COMMANDS_I2C 0
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
#endif
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
- CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD | \
- CONFIG_COMMANDS_ADD_EEPROM | \
- CONFIG_COMMANDS_I2C | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD | \
- CONFIG_COMMANDS_ADD_EEPROM | \
- CONFIG_COMMANDS_I2C | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_FAT | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP | \
- CFG_CMD_USB )
+ #undef CONFIG_CMD_CACHE
#endif
+
/* moved up */
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 5
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
@@ -296,7 +293,7 @@
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index c4e629a..92148e2 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -98,7 +98,15 @@
#undef CONFIG_STATUS_LED /* no status-led */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -117,32 +125,32 @@
CFG_POST_SPR )
#undef CONFIG_POST
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
+#define CONFIG_CMD_DIAG
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_SNTP )
#define CONFIG_NETCONSOLE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
@@ -156,7 +164,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -246,7 +254,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index ff061ee..3b471d0 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -38,11 +38,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_R
/*
@@ -55,25 +50,34 @@
/* Partitions */
#define CONFIG_DOS_PARTITION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_DTT | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_NFS | \
- CFG_CMD_MII | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SNTP
+
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
@@ -245,7 +249,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -264,9 +268,13 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index e5d4397..cd00c49 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -86,18 +86,36 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
- | CFG_CMD_FLASH | CFG_CMD_MEMORY \
- | CFG_CMD_ENV | CFG_CMD_CONSOLE \
- | CFG_CMD_LOADS | CFG_CMD_LOADB \
- | CFG_CMD_IMI | CFG_CMD_CACHE \
- | CFG_CMD_REGINFO | CFG_CMD_NET\
- | CFG_CMD_DHCP | CFG_CMD_I2C \
- | CFG_CMD_DATE)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
/*
@@ -403,7 +421,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/v37.h b/include/configs/v37.h
index a2e99b5..0407253 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -76,16 +76,30 @@
#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DATE )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_DATE
+
/*
* JFFS2 partitions
@@ -105,15 +119,12 @@
#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)"
*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -194,7 +205,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 0b7b19e..c0b1a15 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -46,11 +46,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -89,28 +84,37 @@
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00001000
+
/*
- * Supported commands
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_SDRAM | \
- CFG_CMD_DATE | \
- CFG_CMD_USB | \
- CFG_CMD_FAT)
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Boot low with 16 MB Flash
@@ -254,7 +258,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -270,6 +274,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 16db43b..d250150 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -96,14 +96,29 @@
#define CFG_SERIAL0 0x101F1000
#define CFG_SERIAL1 0x101F2000
-#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV)
-/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0"
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 06d8536..561a8bc 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -89,34 +89,38 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#ifdef CONFIG_SPLASH_SCREEN
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#else
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_SPLASH_SCREEN)
+ #define CONFIG_CMD_BMP
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -131,7 +135,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -214,7 +218,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 4e97b01..7cab31d 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -131,33 +131,38 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN)
-#else
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_ENV | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_JFFS2)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if !defined(VOICEBLUE_SMALL_FLASH)
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_JFFS2
#endif
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
#define CONFIG_LOOPW
#ifdef VOICEBLUE_SMALL_FLASH
@@ -220,8 +225,6 @@
#endif /* VOICEBLUE_SMALL_FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index b34dc71..180549e 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -98,26 +98,38 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -128,7 +140,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -283,7 +295,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -340,7 +352,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index 47251bb..c67b301 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -36,18 +36,24 @@
/*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * BOOTP options
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- & ~CFG_CMD_NET \
- & ~CFG_CMD_LOADS \
- & ~CFG_CMD_CONSOLE \
- & ~CFG_CMD_AUTOSCRIPT \
-/* | CFG_CMD_JFFS2 */ \
- )
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+
/*
* Boot options. Setting delay to -1 stops autostart count down.
@@ -152,7 +158,7 @@
* Right now there is no gain for user, but later on booting kernel might be
* possible. Consider using XIP kernel running from flash to save RAM
* footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_FIRST_SECTOR 5
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 1039762..7418986 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -64,15 +64,29 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_NFS | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
+#undef CONFIG_CMD_DTT
+
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
@@ -86,7 +100,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 825bfd1..bcd16ec 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -81,14 +81,26 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index dc702cf..5733933 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -102,10 +102,26 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_JFFS2
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b4c720d..35001d7 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -118,27 +118,39 @@
#define CFG_ENV_IS_NOWHERE 1
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
-#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_IRQ |\
- CFG_CMD_BDI |\
- CFG_CMD_NET |\
- CFG_CMD_IMI |\
- CFG_CMD_ECHO |\
- CFG_CMD_CACHE |\
- CFG_CMD_RUN |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_ASKENV |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_MISC |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_PING \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_PING
+
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 3b106ef..6a5b7f1 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -233,17 +233,20 @@
#ifdef CONFIG_440EP
/* USB */
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000)
+#define CFG_USB_OHCI_SLOT_NAME "ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
-#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2)
-
#define CONFIG_SUPPORT_VFAT
-#else
-#define CMD_USB 0 /* no USB on 440GR */
#endif /* CONFIG_440EP */
#ifdef DEBUG
@@ -252,32 +255,49 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#ifdef CONFIG_440EP
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
+#endif
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -344,7 +364,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -356,7 +376,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 1fdcc4b..9c536fd 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -136,7 +136,7 @@
/* Don't probe these addrs */
#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
-/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+/* #if defined(CONFIG_CMD_EEPROM) */
/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/* #endif */
@@ -191,24 +191,36 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
@@ -232,7 +244,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -313,7 +325,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -325,7 +337,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
new file mode 100644
index 0000000..605755a
--- /dev/null
+++ b/include/configs/zeus.h
@@ -0,0 +1,382 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * zeus.h - configuration for Zeus board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ZEUS 1 /* Board is Zeus */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_111
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_CACHE | \
+ CFG_POST_UART | \
+ CFG_POST_ETHER)
+
+#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE {UART0_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* these are for the ST M24C02 2kbit serial i2c eeprom */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+/*
+ * The layout of the I2C EEPROM, used for bootstrap setup and for board-
+ * specific values, like ethaddr... that can be restored via the sw-reset
+ * button
+ */
+#define FACTORY_RESET_I2C_EEPROM 0x50
+#define FACTORY_RESET_ENV_OFFS 0x80
+#define FACTORY_RESET_ENV_SIZE 0x80
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in OCM */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash 16M) initialization */
+#define CFG_EBC_PB0AP 0x05815600
+#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */
+#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */
+#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */
+#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CFG_GPIO0_ODR 0x00000000
+
+#define CFG_GPIO_SW_RESET 1
+#define CFG_GPIO_ZEUS_PE 12
+#define CFG_GPIO_LED_RED 22
+#define CFG_GPIO_LED_GREEN 23
+
+/* Time in milli-seconds */
+#define CFG_TIME_POST 5000
+#define CFG_TIME_FACTORY_RESET 10000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
+#define CONFIG_IPADDR 192.168.1.10
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_GATEWAYIP 192.168.1.100
+#define CONFIG_ETHADDR 50:00:00:00:06:00
+#define CONFIG_ETH1ADDR 50:00:00:00:06:01
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "logversion=2\0" \
+ "hostname=zeus\0" \
+ "netdev=eth0\0" \
+ "ethact=ppc_4xx_eth0\0" \
+ "netmask=255.255.255.0\0" \
+ "ramdisk_size=50000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw" \
+ " nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw" \
+ " ramdisk=${ramdisk_size}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0," \
+ "${baudrate}\0" \
+ "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "run nfsargs addip addtty;bootm\0" \
+ "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "tftp ${ramdisk_mem_addr} ${file_fs};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \
+ "rootpath=/target_fs/zeus\0" \
+ "kernel_fl_addr=ff000000\0" \
+ "kernel_mem_addr=200000\0" \
+ "ramdisk_fl_addr=ff300000\0" \
+ "ramdisk_mem_addr=4000000\0" \
+ "uboot_fl_addr=fffc0000\0" \
+ "uboot_mem_addr=100000\0" \
+ "file_uboot=/zeus/u-boot.bin\0" \
+ "tftp_uboot=tftp 100000 ${file_uboot}\0" \
+ "update_uboot=protect off fffc0000 ffffffff;" \
+ "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \
+ "protect on fffc0000 ffffffff\0" \
+ "upd_uboot=run tftp_uboot;run update_uboot\0" \
+ "file_kernel=/zeus/uImage_ba\0" \
+ "tftp_kernel=tftp 100000 ${file_kernel}\0" \
+ "update_kernel=protect off ff000000 ff17ffff;" \
+ "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \
+ "upd_kernel=run tftp_kernel;run update_kernel\0" \
+ "file_fs=/zeus/rootfs_ba.img\0" \
+ "tftp_fs=tftp 100000 ${file_fs}\0" \
+ "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
+ "cp.b 100000 ff300000 580000\0" \
+ "upd_fs=run tftp_fs;run update_fs\0" \
+ "bootcmd=chkreset;run ramargs addip addtty addmisc;" \
+ "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \
+ ""
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 1e8ed7a..517ecb1 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -76,19 +76,32 @@
#define CONFIG_BAUDRATE 115200
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifdef TURN_ON_ETHERNET
-# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
+ #define CONFIG_CMD_PING
#else
-# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_ENV \
- | CFG_CMD_NAND) \
- & ~(CFG_CMD_NET \
- | CFG_CMD_FLASH \
- | CFG_CMD_IMLS))
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_NAND
+
+ #undef CONFIG_CMD_NET
+ #undef CONFIG_CMD_FLASH
+ #undef CONFIG_CMD_IMLS
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY -1
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -100,7 +113,7 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_TIMESTAMP
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/da9030.h b/include/da9030.h
index 41108b9..3e3b202 100644
--- a/include/da9030.h
+++ b/include/da9030.h
@@ -104,3 +104,15 @@
#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
#define SYS_CONTROL_A_WATCHDOG (1<<7)
+
+#define MISC_CONTROLB_USB_INT_RISING (1<<2)
+#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
+
+#define USB_PUMP_USBVE (1<<0)
+#define USB_PUMP_USBVEP (1<<1)
+#define USB_PUMP_SRP_DETECT (1<<2)
+#define USB_PUMP_SESSION_VALID (1<<3)
+#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
+#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
+#define USB_PUMP_EN_USBVE (1<<6)
+#define USB_PUMP_EN_USBVEP (1<<7)
diff --git a/include/dataflash.h b/include/dataflash.h
index 650454e..fbd5e17 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -38,13 +38,47 @@
#include "config.h"
/*number of protected area*/
-#define NB_DATAFLASH_AREA 4
+#ifdef CONFIG_NEW_PARTITION
+# define NB_DATAFLASH_AREA 6
+#else
+# define NB_DATAFLASH_AREA 4
+#endif
+
+#ifdef CFG_NO_FLASH
+
+/*-----------------------------------------------------------------------
+ * return codes from flash_write():
+ */
+# define ERR_OK 0
+# define ERR_TIMOUT 1
+# define ERR_NOT_ERASED 2
+# define ERR_PROTECTED 4
+# define ERR_INVAL 8
+# define ERR_ALIGN 16
+# define ERR_UNKNOWN_FLASH_VENDOR 32
+# define ERR_UNKNOWN_FLASH_TYPE 64
+# define ERR_PROG_ERROR 128
+
+/*-----------------------------------------------------------------------
+ * Protection Flags for flash_protect():
+ */
+# define FLAG_PROTECT_SET 0x01
+# define FLAG_PROTECT_CLEAR 0x02
+# define FLAG_PROTECT_INVALID 0x03
+
+/*-----------------------------------------------------------------------
+ * Set Environment according to label:
+ */
+# define FLAG_SETENV 0x80
+#endif /* CFG_NO_FLASH */
/*define the area structure*/
typedef struct {
unsigned long start;
unsigned long end;
unsigned char protected;
+ unsigned char setenv;
+ unsigned char label[20];
} dataflash_protect_t;
typedef unsigned int AT91S_DataFlashStatus;
@@ -96,6 +130,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
AT91S_DataflashDesc Desc;
AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */
unsigned long logical_address;
+ unsigned long end_address;
unsigned int id; /* device id */
} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO;
@@ -106,6 +141,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
#define AT45DB321 0x34
#define AT45DB642 0x3c
#define AT45DB128 0x10
+#define PAGES_PER_BLOCK 8
#define AT91C_DATAFLASH_TIMEOUT 10000 /* For AT91F_DataFlashWaitReady */
@@ -168,6 +204,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
extern int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, unsigned long size);
extern int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr);
+extern int addr2ram(ulong addr);
extern int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr);
extern int addr_dataflash (unsigned long addr);
extern int read_dataflash (unsigned long addr, unsigned long size, char *result);
@@ -175,4 +212,8 @@ extern int write_dataflash (unsigned long addr, unsigned long dest, unsigned lon
extern void dataflash_print_info (void);
extern void dataflash_perror (int err);
+#ifdef CONFIG_NEW_DF_PARTITION
+extern int AT91F_DataflashSetEnv (void); #endif
+#endif
+
#endif
diff --git a/include/asm-avr32/div64.h b/include/div64.h
index 2e0ba83..2e0ba83 100644
--- a/include/asm-avr32/div64.h
+++ b/include/div64.h
diff --git a/include/dm9161.h b/include/dm9161.h
index f5bfb19..d5d0e8d 100644
--- a/include/dm9161.h
+++ b/include/dm9161.h
@@ -43,9 +43,9 @@
#define DM9161_COLLISION_TEST (1 << 7)
/*--Bit definitions: DM9161_BMSR */
-#define DM9161_100BASE_T4 (1 << 15)
+#define DM9161_100BASE_TX (1 << 15)
#define DM9161_100BASE_TX_FD (1 << 14)
-#define DM9161_100BASE_T4_HD (1 << 13)
+#define DM9161_100BASE_TX_HD (1 << 13)
#define DM9161_10BASE_T_FD (1 << 12)
#define DM9161_10BASE_T_HD (1 << 11)
#define DM9161_MF_PREAMB_SUPPR (1 << 6)
diff --git a/include/dp83848.h b/include/dp83848.h
new file mode 100644
index 0000000..274bc4c
--- /dev/null
+++ b/include/dp83848.h
@@ -0,0 +1,88 @@
+/*
+ * DP83848 ethernet Physical layer
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
+
+#define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */
+#define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */
+#define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */
+#define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */
+#define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */
+#define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */
+#define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */
+#define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */
+#define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */
+#define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */
+
+/*--Bit definitions: DP83848_CTL_REG */
+#define DP83848_RESET (1 << 15) /* 1= S/W Reset */
+#define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */
+#define DP83848_SPEED_SELECT (1 << 13)
+#define DP83848_AUTONEG (1 << 12)
+#define DP83848_POWER_DOWN (1 << 11)
+#define DP83848_ISOLATE (1 << 10)
+#define DP83848_RESTART_AUTONEG (1 << 9)
+#define DP83848_DUPLEX_MODE (1 << 8)
+#define DP83848_COLLISION_TEST (1 << 7)
+
+/*--Bit definitions: DP83848_STAT_REG */
+#define DP83848_100BASE_T4 (1 << 15)
+#define DP83848_100BASE_TX_FD (1 << 14)
+#define DP83848_100BASE_TX_HD (1 << 13)
+#define DP83848_10BASE_T_FD (1 << 12)
+#define DP83848_10BASE_T_HD (1 << 11)
+#define DP83848_MF_PREAMB_SUPPR (1 << 6)
+#define DP83848_AUTONEG_COMP (1 << 5)
+#define DP83848_RMT_FAULT (1 << 4)
+#define DP83848_AUTONEG_ABILITY (1 << 3)
+#define DP83848_LINK_STATUS (1 << 2)
+#define DP83848_JABBER_DETECT (1 << 1)
+#define DP83848_EXTEND_CAPAB (1 << 0)
+
+/*--definitions: DP83848_PHYID1 */
+#define DP83848_PHYID1_OUI 0x2000
+#define DP83848_PHYID2_OUI 0x5c90
+
+/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
+#define DP83848_NP (1 << 15)
+#define DP83848_ACK (1 << 14)
+#define DP83848_RF (1 << 13)
+#define DP83848_PAUSE (1 << 10)
+#define DP83848_T4 (1 << 9)
+#define DP83848_TX_FDX (1 << 8)
+#define DP83848_TX_HDX (1 << 7)
+#define DP83848_10_FDX (1 << 6)
+#define DP83848_10_HDX (1 << 5)
+#define DP83848_AN_IEEE_802_3 0x0001
+
+/*--Bit definitions: DP83848_ANER */
+#define DP83848_PDF (1 << 4)
+#define DP83848_LP_NP_ABLE (1 << 3)
+#define DP83848_NP_ABLE (1 << 2)
+#define DP83848_PAGE_RX (1 << 1)
+#define DP83848_LP_AN_ABLE (1 << 0)
+
+/*--Bit definitions: DP83848_PHY_STAT */
+#define DP83848_RX_ERR_LATCH (1 << 13)
+#define DP83848_POLARITY_STAT (1 << 12)
+#define DP83848_FALSE_CAR_SENSE (1 << 11)
+#define DP83848_SIG_DETECT (1 << 10)
+#define DP83848_DESCRAM_LOCK (1 << 9)
+#define DP83848_PAGE_RCV (1 << 8)
+#define DP83848_PHY_RMT_FAULT (1 << 6)
+#define DP83848_JABBER (1 << 5)
+#define DP83848_AUTONEG_COMPLETE (1 << 4)
+#define DP83848_LOOPBACK_STAT (1 << 3)
+#define DP83848_DUPLEX (1 << 2)
+#define DP83848_SPEED (1 << 1)
+#define DP83848_LINK (1 << 0)
diff --git a/include/dtt.h b/include/dtt.h
index 842a761..2e8c690 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -29,6 +29,7 @@
#if defined(CONFIG_DTT_LM75) || \
defined(CONFIG_DTT_DS1621) || \
+ defined(CONFIG_DTT_DS1775) || \
defined(CONFIG_DTT_LM81) || \
defined(CONFIG_DTT_ADM1021)
@@ -78,6 +79,13 @@ extern int dtt_get_temp(int sensor);
#define DTT_CONFIG 0xAC
#endif
+#if defined(CONFIG_DTT_DS1775)
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_OS 0x3
+#endif
+
#if defined(CONFIG_DTT_ADM1021)
#define DTT_READ_LOC_VALUE 0x00
#define DTT_READ_REM_VALUE 0x01
diff --git a/include/exports.h b/include/exports.h
index 8f7f617..d6512cb 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -23,10 +23,15 @@ void do_reset (void);
unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
char *getenv (char *name);
void setenv (char *varname, char *varvalue);
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+long simple_strtol(const char *cp,char **endp,unsigned int base);
+int strcmp(const char * cs,const char * ct);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *varname, char *varvalue);
+#endif
+#if defined(CONFIG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
-#endif /* CFG_CMD_I2C */
+#endif
void app_startup(char **);
@@ -40,7 +45,7 @@ enum {
XF_MAX
};
-#define XF_VERSION 3
+#define XF_VERSION 4
#if defined(CONFIG_I386)
extern gd_t *global_data;
diff --git a/include/fdt_support.h b/include/fdt_support.h
index a276834..60fa423 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -38,5 +38,11 @@ int fdt_env(void *fdt);
int fdt_bd_t(void *fdt);
#endif
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup(void *blob, bd_t *bd);
+void ft_cpu_setup(void *blob, bd_t *bd);
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
diff --git a/include/flash.h b/include/flash.h
index 43b9c6b..b0bf733 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -119,6 +119,11 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of
*/
#define FLAG_PROTECT_SET 0x01
#define FLAG_PROTECT_CLEAR 0x02
+#define FLAG_PROTECT_INVALID 0x03
+/*-----------------------------------------------------------------------
+ * Set Environment according to label:
+ */
+#define FLAG_SETENV 0x80
/*-----------------------------------------------------------------------
* Device IDs
diff --git a/include/lcd.h b/include/lcd.h
index b688583..8a4273c 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -173,10 +173,10 @@ void lcd_printf (const char *fmt, ...);
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */
/************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
# include <bmp_layout.h>
# include <asm/byteorder.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
/*
* Information about displays we are using. This is for configuring
diff --git a/include/led.h b/include/led.h
new file mode 100644
index 0000000..57c2b4a
--- /dev/null
+++ b/include/led.h
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2006
+ * Atmel Nordic AB <www.atmel.com>
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LED_H
+#define __LED_H
+
+#ifndef __ASSEMBLY__
+extern void LED_init (void);
+extern void red_LED_on(void);
+extern void red_LED_off(void);
+extern void green_LED_on(void);
+extern void green_LED_off(void);
+extern void yellow_LED_on(void);
+extern void yellow_LED_off(void);
+#else
+ .extern LED_init
+ .extern red_LED_on
+ .extern red_LED_off
+ .extern yellow_LED_on
+ .extern yellow_LED_off
+ .extern green_LED_on
+ .extern green_LED_off
+#endif
+#endif
diff --git a/include/libfdt.h b/include/libfdt.h
index f8bac73..340e89d 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -77,7 +77,13 @@ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
const char *name, int namelen);
int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
-int fdt_path_offset(const void *fdt, const char *path);
+int fdt_find_node_by_path(const void *fdt, const char *path);
+int fdt_find_node_by_type(const void *fdt, int nodeoffset, const char *type);
+
+int fdt_node_is_compatible(const void *fdt, int nodeoffset,
+ const char *compat);
+int fdt_find_compatible_node(const void *fdt, int nodeoffset,
+ const char *type, const char *compat);
struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
const char *name, int *lenp);
diff --git a/include/libfdt_env.h b/include/libfdt_env.h
index e746314..78f7258 100644
--- a/include/libfdt_env.h
+++ b/include/libfdt_env.h
@@ -26,7 +26,7 @@
#include <asm/byteorder.h>
#include <linux/string.h>
-struct fdt_header *fdt; /* Pointer to the working fdt */
+extern struct fdt_header *fdt; /* Pointer to the working fdt */
#define fdt32_to_cpu(x) __be32_to_cpu(x)
#define cpu_to_fdt32(x) __cpu_to_be32(x)
diff --git a/include/mk48t59.h b/include/mk48t59.h
index 03c992e..a4459c0 100644
--- a/include/mk48t59.h
+++ b/include/mk48t59.h
@@ -26,7 +26,7 @@
*/
-#if defined(CONFIG_RTC_MK48T59) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if defined(CONFIG_RTC_MK48T59) && defined(CONFIG_CMD_DATE)
#define RTC_PORT_ADDR0 CFG_ISA_IO + 0x70
#define RTC_PORT_ADDR1 RTC_PORT_ADDR0 + 0x1
diff --git a/include/mpc512x.h b/include/mpc512x.h
new file mode 100644
index 0000000..a100b22
--- /dev/null
+++ b/include/mpc512x.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Derived from the MPC83xx header.
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+
+#include <config.h>
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
+
+/* System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
+
+
+/* IMMRBAR - Internal Memory Register Base Address
+ */
+#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
+#define IMMRBAR 0x0000 /* Register offset to immr */
+#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
+#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
+
+/* LAWBAR - Local Access Window Base Address Register
+ */
+#define LPBAW 0x0020 /* Register offset to immr */
+#define LPCS0AW 0x0024
+#define LPCS1AW 0x0028
+#define LPCS2AW 0x002C
+#define LPCS3AW 0x0030
+#define LPCS4AW 0x0034
+#define LPCS5AW 0x0038
+#define LPCS6AW 0x003C
+#define LPCA7AW 0x0040
+#define SRAMBAR 0x00C4
+
+#define LPC_OFFSET 0x10000
+
+#define CS0_CONFIG 0x00000
+#define CS1_CONFIG 0x00004
+#define CS2_CONFIG 0x00008
+#define CS3_CONFIG 0x0000C
+#define CS4_CONFIG 0x00010
+#define CS5_CONFIG 0x00014
+#define CS6_CONFIG 0x00018
+#define CS7_CONFIG 0x0001C
+
+#define CS_CTRL 0x00020
+#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */
+#define CS_CTRL_IE 0x08000000 /* CS Interrupt Enable bit */
+
+/* SPRIDR - System Part and Revision ID Register
+ */
+#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */
+#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */
+
+#define SPR_5121E 0x80180000
+
+/* SPCR - System Priority Configuration Register
+ */
+#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
+#define SPCR_PCIHPE_SHIFT (31-3)
+#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */
+#define SPCR_PCIPR_SHIFT (31-7)
+#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */
+#define SPCR_TBEN_SHIFT (31-9)
+#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */
+#define SPCR_COREPR_SHIFT (31-11)
+
+/* SWCRR - System Watchdog Control Register
+ */
+#define SWCRR 0x0904 /* Register offset to immr */
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */
+#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+
+/* SWCNR - System Watchdog Counter Register
+ */
+#define SWCNR 0x0908 /* Register offset to immr */
+#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */
+#define SWCNR_RES ~(SWCNR_SWCN)
+
+/* SWSRR - System Watchdog Service Register
+ */
+#define SWSRR 0x090E /* Register offset to immr */
+
+/* ACR - Arbiter Configuration Register
+ */
+#define ACR_COREDIS 0x10000000 /* Core disable */
+#define ACR_COREDIS_SHIFT (31-7)
+#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */
+#define ACR_PIPE_DEP_SHIFT (31-15)
+#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */
+#define ACR_PCI_RPTCNT_SHIFT (31-19)
+#define ACR_RPTCNT 0x00000700 /* Repeat count */
+#define ACR_RPTCNT_SHIFT (31-23)
+#define ACR_APARK 0x00000030 /* Address parking */
+#define ACR_APARK_SHIFT (31-27)
+#define ACR_PARKM 0x0000000F /* Parking master */
+#define ACR_PARKM_SHIFT (31-31)
+
+/* ATR - Arbiter Timers Register
+ */
+#define ATR_DTO 0x00FF0000 /* Data time out */
+#define ATR_ATO 0x000000FF /* Address time out */
+
+/* AER - Arbiter Event Register
+ */
+#define AER_ETEA 0x00000020 /* Transfer error */
+#define AER_RES 0x00000010 /* Reserved transfer type */
+#define AER_ECW 0x00000008 /* External control word transfer type */
+#define AER_AO 0x00000004 /* Address Only transfer type */
+#define AER_DTO 0x00000002 /* Data time out */
+#define AER_ATO 0x00000001 /* Address time out */
+
+/* AEATR - Arbiter Event Address Register
+ */
+#define AEATR_EVENT 0x07000000 /* Event type */
+#define AEATR_MSTR_ID 0x001F0000 /* Master Id */
+#define AEATR_TBST 0x00000800 /* Transfer burst */
+#define AEATR_TSIZE 0x00000700 /* Transfer Size */
+#define AEATR_TTYPE 0x0000001F /* Transfer Type */
+
+/* RSR - Reset Status Register
+ */
+#define RSR_SWSR 0x00002000 /* software soft reset */
+#define RSR_SWSR_SHIFT 13
+#define RSR_SWHR 0x00001000 /* software hard reset */
+#define RSR_SWHR_SHIFT 12
+#define RSR_JHRS 0x00000200 /* jtag hreset */
+#define RSR_JHRS_SHIFT 9
+#define RSR_JSRS 0x00000100 /* jtag sreset status */
+#define RSR_JSRS_SHIFT 8
+#define RSR_CSHR 0x00000010 /* checkstop reset status */
+#define RSR_CSHR_SHIFT 4
+#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+#define RSR_SWRS_SHIFT 3
+#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+#define RSR_BMRS_SHIFT 2
+#define RSR_SRS 0x00000002 /* soft reset status */
+#define RSR_SRS_SHIFT 1
+#define RSR_HRS 0x00000001 /* hard reset status */
+#define RSR_HRS_SHIFT 0
+#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\
+ RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
+ RSR_BMRS | RSR_SRS | RSR_HRS)
+/* RMR - Reset Mode Register
+ */
+#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+#define RMR_CSRE_SHIFT 0
+#define RMR_RES ~(RMR_CSRE)
+
+/* RCR - Reset Control Register
+ */
+#define RCR_SWHR 0x00000002 /* software hard reset */
+#define RCR_SWSR 0x00000001 /* software soft reset */
+#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
+
+/* RCER - Reset Control Enable Register
+ */
+#define RCER_CRE 0x00000001 /* software hard reset */
+#define RCER_RES ~(RCER_CRE)
+
+/* SPMR - System PLL Mode Register
+ */
+#define SPMR_SPMF 0x0F000000
+#define SPMR_SPMF_SHIFT 24
+#define SPMR_CPMF 0x000F0000
+#define SPMR_CPMF_SHIFT 16
+
+/* SCFR1 System Clock Frequency Register 1
+ */
+#define SCFR1_IPS_DIV 0x2
+#define SCFR1_IPS_DIV_MASK 0x03800000
+#define SCFR1_IPS_DIV_SHIFT 23
+
+/* SCFR2 System Clock Frequency Register 2
+ */
+#define SCFR2_SYS_DIV 0xFC000000
+#define SCFR2_SYS_DIV_SHIFT 26
+
+/* SCCR - System Clock Control Registers
+ */
+
+/* System Clock Control Register 1 commands */
+#define CLOCK_SCCR1_CFG_EN 0x80000000
+#define CLOCK_SCCR1_LPC_EN 0x40000000
+#define CLOCK_SCCR1_NFC_EN 0x20000000
+#define CLOCK_SCCR1_PATA_EN 0x10000000
+#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn))
+#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000
+#define CLOCK_SCCR1_SATA_EN 0x00004000
+#define CLOCK_SCCR1_FEC_EN 0x00002000
+#define CLOCK_SCCR1_TPR_EN 0x00001000
+#define CLOCK_SCCR1_PCI_EN 0x00000800
+#define CLOCK_SCCR1_DDR_EN 0x00000400
+
+/* System Clock Control Register 2 commands */
+#define CLOCK_SCCR2_DIU_EN 0x80000000
+#define CLOCK_SCCR2_AXE_EN 0x40000000
+#define CLOCK_SCCR2_MEM_EN 0x20000000
+#define CLOCK_SCCR2_USB2_EN 0x10000000
+#define CLOCK_SCCR2_USB1_EN 0x08000000
+#define CLOCK_SCCR2_I2C_EN 0x04000000
+#define CLOCK_SCCR2_BDLC_EN 0x02000000
+#define CLOCK_SCCR2_SDHC_EN 0x01000000
+#define CLOCK_SCCR2_SPDIF_EN 0x00800000
+#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000
+#define CLOCK_SCCR2_MBX_EN 0x00200000
+#define CLOCK_SCCR2_MBX_3D_EN 0x00100000
+#define CLOCK_SCCR2_IIM_EN 0x00080000
+
+/* PSC FIFO Command values */
+#define PSC_FIFO_RESET_SLICE 0x80
+#define PSC_FIFO_ENABLE_SLICE 0x01
+
+/* PSC FIFO Controller Command values */
+#define FIFOC_ENABLE_CLOCK_GATE 0x01
+#define FIFOC_DISABLE_CLOCK_GATE 0x00
+
+/* PSC FIFO status */
+#define PSC_FIFO_EMPTY 0x01
+
+/* PSC Command values */
+#define PSC_RX_ENABLE 0x01
+#define PSC_RX_DISABLE 0x02
+#define PSC_TX_ENABLE 0x04
+#define PSC_TX_DISABLE 0x08
+#define PSC_SEL_MODE_REG_1 0x10
+#define PSC_RST_RX 0x20
+#define PSC_RST_TX 0x30
+#define PSC_RST_ERR_STAT 0x40
+#define PSC_RST_BRK_CHG_INT 0x50
+#define PSC_START_BRK 0x60
+#define PSC_STOP_BRK 0x70
+
+/* PSC status register bits */
+#define PSC_SR_CDE 0x0080
+#define PSC_SR_TXEMP 0x0800
+#define PSC_SR_OE 0x1000
+#define PSC_SR_PE 0x2000
+#define PSC_SR_FE 0x4000
+#define PSC_SR_RB 0x8000
+
+/* PSC mode fields */
+#define PSC_MODE_5_BITS 0x00
+#define PSC_MODE_6_BITS 0x01
+#define PSC_MODE_7_BITS 0x02
+#define PSC_MODE_8_BITS 0x03
+#define PSC_MODE_PAREVEN 0x00
+#define PSC_MODE_PARODD 0x04
+#define PSC_MODE_PARFORCE 0x08
+#define PSC_MODE_PARNONE 0x10
+#define PSC_MODE_ENTIMEOUT 0x20
+#define PSC_MODE_RXRTS 0x80
+#define PSC_MODE_1_STOPBIT 0x07
+
+/*
+ * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
+ *
+ * NOTE: individual PSC units are free to use whatever area (and size) of the
+ * FIFOC internal memory, so make sure memory areas for FIFO slices used by
+ * different PSCs do not overlap!
+ *
+ * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
+ * tests indicate that it is 1024 words total.
+ */
+#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */
+#define FIFOC_PSC0_TX_ADDR 0x0
+#define FIFOC_PSC0_RX_SIZE 0x0
+#define FIFOC_PSC0_RX_ADDR 0x0
+
+#define FIFOC_PSC1_TX_SIZE 0x0
+#define FIFOC_PSC1_TX_ADDR 0x0
+#define FIFOC_PSC1_RX_SIZE 0x0
+#define FIFOC_PSC1_RX_ADDR 0x0
+
+#define FIFOC_PSC2_TX_SIZE 0x0
+#define FIFOC_PSC2_TX_ADDR 0x0
+#define FIFOC_PSC2_RX_SIZE 0x0
+#define FIFOC_PSC2_RX_ADDR 0x0
+
+#define FIFOC_PSC3_TX_SIZE 0x04
+#define FIFOC_PSC3_TX_ADDR 0x0
+#define FIFOC_PSC3_RX_SIZE 0x04
+#define FIFOC_PSC3_RX_ADDR 0x10
+
+#define FIFOC_PSC4_TX_SIZE 0x0
+#define FIFOC_PSC4_TX_ADDR 0x0
+#define FIFOC_PSC4_RX_SIZE 0x0
+#define FIFOC_PSC4_RX_ADDR 0x0
+
+#define FIFOC_PSC5_TX_SIZE 0x0
+#define FIFOC_PSC5_TX_ADDR 0x0
+#define FIFOC_PSC5_RX_SIZE 0x0
+#define FIFOC_PSC5_RX_ADDR 0x0
+
+#define FIFOC_PSC6_TX_SIZE 0x0
+#define FIFOC_PSC6_TX_ADDR 0x0
+#define FIFOC_PSC6_RX_SIZE 0x0
+#define FIFOC_PSC6_RX_ADDR 0x0
+
+#define FIFOC_PSC7_TX_SIZE 0x0
+#define FIFOC_PSC7_TX_ADDR 0x0
+#define FIFOC_PSC7_RX_SIZE 0x0
+#define FIFOC_PSC7_RX_ADDR 0x0
+
+#define FIFOC_PSC8_TX_SIZE 0x0
+#define FIFOC_PSC8_TX_ADDR 0x0
+#define FIFOC_PSC8_RX_SIZE 0x0
+#define FIFOC_PSC8_RX_ADDR 0x0
+
+#define FIFOC_PSC9_TX_SIZE 0x0
+#define FIFOC_PSC9_TX_ADDR 0x0
+#define FIFOC_PSC9_RX_SIZE 0x0
+#define FIFOC_PSC9_RX_ADDR 0x0
+
+#define FIFOC_PSC10_TX_SIZE 0x0
+#define FIFOC_PSC10_TX_ADDR 0x0
+#define FIFOC_PSC10_RX_SIZE 0x0
+#define FIFOC_PSC10_RX_ADDR 0x0
+
+#define FIFOC_PSC11_TX_SIZE 0x0
+#define FIFOC_PSC11_TX_ADDR 0x0
+#define FIFOC_PSC11_RX_SIZE 0x0
+#define FIFOC_PSC11_RX_ADDR 0x0
+
+/* IO Control Register
+ */
+
+/* Indexes in regs array */
+#define MEM_IDX 0x00
+#define SPDIF_TXCLOCK_IDX 0x73
+#define SPDIF_TX_IDX 0x74
+#define SPDIF_RX_IDX 0x75
+#define PSC0_0_IDX 0x83
+#define PSC0_1_IDX 0x84
+#define PSC0_2_IDX 0x85
+#define PSC0_3_IDX 0x86
+#define PSC0_4_IDX 0x87
+#define PSC1_0_IDX 0x88
+#define PSC1_1_IDX 0x89
+#define PSC1_2_IDX 0x8a
+#define PSC1_3_IDX 0x8b
+#define PSC1_4_IDX 0x8c
+#define PSC2_0_IDX 0x8d
+#define PSC2_1_IDX 0x8e
+#define PSC2_2_IDX 0x8f
+#define PSC2_3_IDX 0x90
+#define PSC2_4_IDX 0x91
+
+#define IOCTRL_FUNCMUX_SHIFT 7
+#define IOCTRL_FUNCMUX_FEC 1
+#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
+
+/* Set for DDR */
+#define IOCTRL_MUX_DDR 0x00000036
+
+ /* Register Offset Base */
+#define MPC512X_FEC (CFG_IMMR + 0x02800)
+
+/* Number of I2C buses */
+#define I2C_BUS_CNT 3
+
+/* I2Cn control register bits */
+#define I2C_EN 0x80
+#define I2C_IEN 0x40
+#define I2C_STA 0x20
+#define I2C_TX 0x10
+#define I2C_TXAK 0x08
+#define I2C_RSTA 0x04
+#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
+
+/* I2Cn status register bits */
+#define I2C_CF 0x80
+#define I2C_AAS 0x40
+#define I2C_BB 0x20
+#define I2C_AL 0x10
+#define I2C_SRW 0x04
+#define I2C_IF 0x02
+#define I2C_RXAK 0x01
+
+#endif /* __MPC512X_H__ */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 336c0ac..829dbf9 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -86,6 +86,8 @@
#define SPR_8360_REV12 0x80490012
#define SPR_8360E_REV20 0x80480020
#define SPR_8360_REV20 0x80490020
+#define SPR_8360E_REV21 0x80480021
+#define SPR_8360_REV21 0x80490021
#define SPR_8323E_REV10 0x80620010
#define SPR_8323_REV10 0x80630010
@@ -600,7 +602,9 @@
#define SCCR_TSEC1CM_3 0xC0000000
#define SCCR_TSEC1ON 0x20000000
+#define SCCR_TSEC1ON_SHIFT 29
#define SCCR_TSEC2ON 0x10000000
+#define SCCR_TSEC2ON_SHIFT 28
#endif
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 6fbd504..321b24f 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -1,14 +1,14 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
* Copyright(c) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
*/
#ifndef __MPC85xx_H__
#define __MPC85xx_H__
-#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-#define _START_OFFSET EXC_OFF_SYS_RESET
+/* define for common ppc_asm.tmpl */
+#define EXC_OFF_SYS_RESET 0x100 /* System reset */
+#define _START_OFFSET 0
#if defined(CONFIG_E500)
#include <e500.h>
diff --git a/include/net.h b/include/net.h
index 461e038..603452a 100644
--- a/include/net.h
+++ b/include/net.h
@@ -99,10 +99,12 @@ struct eth_device {
int state;
int (*init) (struct eth_device*, bd_t*);
- int (*send) (struct eth_device*, volatile void* pachet, int length);
+ int (*send) (struct eth_device*, volatile void* packet, int length);
int (*recv) (struct eth_device*);
void (*halt) (struct eth_device*);
-
+#ifdef CONFIG_MCAST_TFTP
+ int (*mcast) (struct eth_device*, u32 ip, u8 set);
+#endif
struct eth_device *next;
void *priv;
};
@@ -124,6 +126,11 @@ extern int eth_rx(void); /* Check for received packets */
extern void eth_halt(void); /* stop SCC */
extern char *eth_get_name(void); /* get name of current device */
+#ifdef CONFIG_MCAST_TFTP
+int eth_mcast_join( IPaddr_t mcast_addr, u8 join);
+u32 ether_crc (size_t len, unsigned char const *p);
+#endif
+
/**********************************************************************/
/*
@@ -296,7 +303,7 @@ typedef struct icmphdr {
extern IPaddr_t NetOurGatewayIP; /* Our gateway IP addresse */
extern IPaddr_t NetOurSubnetMask; /* Our subnet mask (0 = unknown)*/
extern IPaddr_t NetOurDNSIP; /* Our Domain Name Server (0 = unknown)*/
-#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_DNS2)
+#if defined(CONFIG_BOOTP_DNS2)
extern IPaddr_t NetOurDNS2IP; /* Our 2nd Domain Name Server (0 = unknown)*/
#endif
extern char NetOurNISDomain[32]; /* Our NIS domain */
@@ -341,17 +348,17 @@ typedef enum { BOOTP, RARP, ARP, TFTP, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP
/* from net/net.c */
extern char BootFile[128]; /* Boot File name */
-#if (CONFIG_COMMANDS & CFG_CMD_PING)
+#if defined(CONFIG_CMD_PING)
extern IPaddr_t NetPingIP; /* the ip address to ping */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_CDP)
+#if defined(CONFIG_CMD_CDP)
/* when CDP completes these hold the return values */
extern ushort CDPNativeVLAN;
extern ushort CDPApplianceVLAN;
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SNTP)
+#if defined(CONFIG_CMD_SNTP)
extern IPaddr_t NetNtpServerIP; /* the ip address to NTP */
extern int NetTimeOffset; /* offset time from UTC */
#endif
@@ -435,6 +442,29 @@ static inline void NetCopyLong(ulong *to, ulong *from)
memcpy((void*)to, (void*)from, sizeof(ulong));
}
+/**
+ * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is all zeroes.
+ */
+static inline int is_zero_ether_addr(const u8 *addr)
+{
+ return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
+}
+
+/**
+ * is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a multicast address.
+ * By definition the broadcast address is also a multicast address.
+ */
+static inline int is_multicast_ether_addr(const u8 *addr)
+{
+ return (0x01 & addr[0]);
+}
+
/* Convert an IP address to a string */
extern void ip_to_string (IPaddr_t x, char *s);
diff --git a/include/pci.h b/include/pci.h
index 7c9a0e3..8e5dacc 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -302,6 +302,12 @@
#define PCI_MAX_PCI_DEVICES 32
#define PCI_MAX_PCI_FUNCTIONS 8
+#define PCI_DCR 0x54 /* PCIe Device Control Register */
+#define PCI_DSR 0x56 /* PCIe Device Status Register */
+#define PCI_LSR 0x5e /* PCIe Link Status Register */
+#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */
+#define PCI_LTSSM_L0 0x16 /* L0 state */
+
/* Include the ID list */
#include <pci_ids.h>
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 8f564da..7305805 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -31,8 +31,8 @@
* Allow configuration to select PCMCIA slot,
* or try to generate a useful default
*/
-#if ( CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
- ((CONFIG_COMMANDS & CFG_CMD_IDE) && \
+#if defined(CONFIG_CMD_PCMCIA) || \
+ (defined(CONFIG_CMD_IDE) && \
(defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) ) )
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
@@ -306,14 +306,14 @@ typedef struct {
#define CISTPL_IDE_HAS_INDEX 0x20
#define CISTPL_IDE_IOIS16 0x40
-#endif /* CFG_CMD_PCMCIA || CFG_CMD_IDE && (CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT) */
+#endif
#ifdef CONFIG_8xx
extern u_int *pcmcia_pgcrx[];
#define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot])
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) \
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) \
|| defined(CONFIG_PXA_PCMCIA)
extern int check_ide_device(int slot);
#endif
diff --git a/include/post.h b/include/post.h
index 8259e5d..c8062bb 100644
--- a/include/post.h
+++ b/include/post.h
@@ -92,6 +92,7 @@ extern int post_hotkeys_pressed(void);
#define CFG_POST_DSP 0x00001000
#define CFG_POST_CODEC 0x00002000
#define CFG_POST_FPU 0x00004000
+#define CFG_POST_ECC 0x00008000
#endif /* CONFIG_POST */
diff --git a/include/ppc405.h b/include/ppc405.h
index 8e64731..0c7bf3e 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -541,6 +541,18 @@
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
@@ -617,6 +629,8 @@
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
@@ -1226,6 +1240,8 @@
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
+#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
#ifndef __ASSEMBLY__
diff --git a/include/ppc440.h b/include/ppc440.h
index 93c10f1..38809f3 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -3354,6 +3354,19 @@ typedef struct {
unsigned long pciClkSync; /* PCI clock is synchronous */
} PPC440_SYS_INFO;
+static inline u32 get_mcsr(void)
+{
+ u32 val;
+
+ asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+ return val;
+}
+
+static inline void set_mcsr(u32 val)
+{
+ asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
#endif /* _ASMLANGUAGE */
#define RESET_VECTOR 0xfffffffc
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 9f4029f..0019d46 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -235,7 +235,7 @@
stw r22,_CTR(r21); \
mfspr r20,XER; \
stw r20,_XER(r21); \
- mfspr r20,DEAR; \
+ mfspr r20, DAR_DEAR; \
stw r20,_DAR(r21); \
mfspr r22,reg1; \
mfspr r23,reg2; \
@@ -285,7 +285,6 @@ label: \
.long hdlr - _start + _START_OFFSET; \
.long crit_return - _start + _START_OFFSET
-#ifdef CONFIG_440
#define MCK_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
@@ -299,6 +298,5 @@ label: \
.L_ ## label : \
.long hdlr - _start + _START_OFFSET; \
.long mck_return - _start + _START_OFFSET
-#endif /* CONFIG_440 */
#endif /* __PPC_ASM_TMPL__ */
diff --git a/include/radeon.h b/include/radeon.h
new file mode 100644
index 0000000..3d11b05
--- /dev/null
+++ b/include/radeon.h
@@ -0,0 +1,1984 @@
+#ifndef _RADEON_H
+#define _RADEON_H
+
+
+#define RADEON_REGSIZE 0x4000
+
+
+#define MM_INDEX 0x0000
+#define MM_DATA 0x0004
+#define BUS_CNTL 0x0030
+#define HI_STAT 0x004C
+#define BUS_CNTL1 0x0034
+#define I2C_CNTL_1 0x0094
+#define CONFIG_CNTL 0x00E0
+#define CONFIG_MEMSIZE 0x00F8
+#define CONFIG_APER_0_BASE 0x0100
+#define CONFIG_APER_1_BASE 0x0104
+#define CONFIG_APER_SIZE 0x0108
+#define CONFIG_REG_1_BASE 0x010C
+#define CONFIG_REG_APER_SIZE 0x0110
+#define PAD_AGPINPUT_DELAY 0x0164
+#define PAD_CTLR_STRENGTH 0x0168
+#define PAD_CTLR_UPDATE 0x016C
+#define PAD_CTLR_MISC 0x0aa0
+#define AGP_CNTL 0x0174
+#define BM_STATUS 0x0160
+#define CAP0_TRIG_CNTL 0x0950
+#define CAP1_TRIG_CNTL 0x09c0
+#define VIPH_CONTROL 0x0C40
+#define VENDOR_ID 0x0F00
+#define DEVICE_ID 0x0F02
+#define COMMAND 0x0F04
+#define STATUS 0x0F06
+#define REVISION_ID 0x0F08
+#define REGPROG_INF 0x0F09
+#define SUB_CLASS 0x0F0A
+#define BASE_CODE 0x0F0B
+#define CACHE_LINE 0x0F0C
+#define LATENCY 0x0F0D
+#define HEADER 0x0F0E
+#define BIST 0x0F0F
+#define REG_MEM_BASE 0x0F10
+#define REG_IO_BASE 0x0F14
+#define REG_REG_BASE 0x0F18
+#define ADAPTER_ID 0x0F2C
+#define BIOS_ROM 0x0F30
+#define CAPABILITIES_PTR 0x0F34
+#define INTERRUPT_LINE 0x0F3C
+#define INTERRUPT_PIN 0x0F3D
+#define MIN_GRANT 0x0F3E
+#define MAX_LATENCY 0x0F3F
+#define ADAPTER_ID_W 0x0F4C
+#define PMI_CAP_ID 0x0F50
+#define PMI_NXT_CAP_PTR 0x0F51
+#define PMI_PMC_REG 0x0F52
+#define PM_STATUS 0x0F54
+#define PMI_DATA 0x0F57
+#define AGP_CAP_ID 0x0F58
+#define AGP_STATUS 0x0F5C
+#define AGP_COMMAND 0x0F60
+#define AIC_CTRL 0x01D0
+#define AIC_STAT 0x01D4
+#define AIC_PT_BASE 0x01D8
+#define AIC_LO_ADDR 0x01DC
+#define AIC_HI_ADDR 0x01E0
+#define AIC_TLB_ADDR 0x01E4
+#define AIC_TLB_DATA 0x01E8
+#define DAC_CNTL 0x0058
+#define DAC_CNTL2 0x007c
+#define CRTC_GEN_CNTL 0x0050
+#define MEM_CNTL 0x0140
+#define MC_CNTL 0x0140
+#define EXT_MEM_CNTL 0x0144
+#define MC_TIMING_CNTL 0x0144
+#define MC_AGP_LOCATION 0x014C
+#define MEM_IO_CNTL_A0 0x0178
+#define MEM_REFRESH_CNTL 0x0178
+#define MEM_INIT_LATENCY_TIMER 0x0154
+#define MC_INIT_GFX_LAT_TIMER 0x0154
+#define MEM_SDRAM_MODE_REG 0x0158
+#define AGP_BASE 0x0170
+#define MEM_IO_CNTL_A1 0x017C
+#define MC_READ_CNTL_AB 0x017C
+#define MEM_IO_CNTL_B0 0x0180
+#define MC_INIT_MISC_LAT_TIMER 0x0180
+#define MEM_IO_CNTL_B1 0x0184
+#define MC_IOPAD_CNTL 0x0184
+#define MC_DEBUG 0x0188
+#define MC_STATUS 0x0150
+#define MEM_IO_OE_CNTL 0x018C
+#define MC_CHIP_IO_OE_CNTL_AB 0x018C
+#define MC_FB_LOCATION 0x0148
+/* #define MC_FB_LOCATION 0x0188 */
+#define HOST_PATH_CNTL 0x0130
+#define MEM_VGA_WP_SEL 0x0038
+#define MEM_VGA_RP_SEL 0x003C
+#define HDP_DEBUG 0x0138
+#define SW_SEMAPHORE 0x013C
+#define CRTC2_GEN_CNTL 0x03f8
+#define CRTC2_DISPLAY_BASE_ADDR 0x033c
+#define SURFACE_CNTL 0x0B00
+#define SURFACE0_LOWER_BOUND 0x0B04
+#define SURFACE1_LOWER_BOUND 0x0B14
+#define SURFACE2_LOWER_BOUND 0x0B24
+#define SURFACE3_LOWER_BOUND 0x0B34
+#define SURFACE4_LOWER_BOUND 0x0B44
+#define SURFACE5_LOWER_BOUND 0x0B54
+#define SURFACE6_LOWER_BOUND 0x0B64
+#define SURFACE7_LOWER_BOUND 0x0B74
+#define SURFACE0_UPPER_BOUND 0x0B08
+#define SURFACE1_UPPER_BOUND 0x0B18
+#define SURFACE2_UPPER_BOUND 0x0B28
+#define SURFACE3_UPPER_BOUND 0x0B38
+#define SURFACE4_UPPER_BOUND 0x0B48
+#define SURFACE5_UPPER_BOUND 0x0B58
+#define SURFACE6_UPPER_BOUND 0x0B68
+#define SURFACE7_UPPER_BOUND 0x0B78
+#define SURFACE0_INFO 0x0B0C
+#define SURFACE1_INFO 0x0B1C
+#define SURFACE2_INFO 0x0B2C
+#define SURFACE3_INFO 0x0B3C
+#define SURFACE4_INFO 0x0B4C
+#define SURFACE5_INFO 0x0B5C
+#define SURFACE6_INFO 0x0B6C
+#define SURFACE7_INFO 0x0B7C
+#define SURFACE_ACCESS_FLAGS 0x0BF8
+#define SURFACE_ACCESS_CLR 0x0BFC
+#define GEN_INT_CNTL 0x0040
+#define GEN_INT_STATUS 0x0044
+#define CRTC_EXT_CNTL 0x0054
+#define RB3D_CNTL 0x1C3C
+#define WAIT_UNTIL 0x1720
+#define ISYNC_CNTL 0x1724
+#define RBBM_GUICNTL 0x172C
+#define RBBM_STATUS 0x0E40
+#define RBBM_STATUS_alt_1 0x1740
+#define RBBM_CNTL 0x00EC
+#define RBBM_CNTL_alt_1 0x0E44
+#define RBBM_SOFT_RESET 0x00F0
+#define RBBM_SOFT_RESET_alt_1 0x0E48
+#define NQWAIT_UNTIL 0x0E50
+#define RBBM_DEBUG 0x0E6C
+#define RBBM_CMDFIFO_ADDR 0x0E70
+#define RBBM_CMDFIFO_DATAL 0x0E74
+#define RBBM_CMDFIFO_DATAH 0x0E78
+#define RBBM_CMDFIFO_STAT 0x0E7C
+#define CRTC_STATUS 0x005C
+#define GPIO_VGA_DDC 0x0060
+#define GPIO_DVI_DDC 0x0064
+#define GPIO_MONID 0x0068
+#define GPIO_CRT2_DDC 0x006c
+#define PALETTE_INDEX 0x00B0
+#define PALETTE_DATA 0x00B4
+#define PALETTE_30_DATA 0x00B8
+#define CRTC_H_TOTAL_DISP 0x0200
+#define CRTC_H_SYNC_STRT_WID 0x0204
+#define CRTC_V_TOTAL_DISP 0x0208
+#define CRTC_V_SYNC_STRT_WID 0x020C
+#define CRTC_VLINE_CRNT_VLINE 0x0210
+#define CRTC_CRNT_FRAME 0x0214
+#define CRTC_GUI_TRIG_VLINE 0x0218
+#define CRTC_DEBUG 0x021C
+#define CRTC_OFFSET_RIGHT 0x0220
+#define CRTC_OFFSET 0x0224
+#define CRTC_OFFSET_CNTL 0x0228
+#define CRTC_PITCH 0x022C
+#define OVR_CLR 0x0230
+#define OVR_WID_LEFT_RIGHT 0x0234
+#define OVR_WID_TOP_BOTTOM 0x0238
+#define DISPLAY_BASE_ADDR 0x023C
+#define SNAPSHOT_VH_COUNTS 0x0240
+#define SNAPSHOT_F_COUNT 0x0244
+#define N_VIF_COUNT 0x0248
+#define SNAPSHOT_VIF_COUNT 0x024C
+#define FP_CRTC_H_TOTAL_DISP 0x0250
+#define FP_CRTC_V_TOTAL_DISP 0x0254
+#define CRT_CRTC_H_SYNC_STRT_WID 0x0258
+#define CRT_CRTC_V_SYNC_STRT_WID 0x025C
+#define CUR_OFFSET 0x0260
+#define CUR_HORZ_VERT_POSN 0x0264
+#define CUR_HORZ_VERT_OFF 0x0268
+#define CUR_CLR0 0x026C
+#define CUR_CLR1 0x0270
+#define FP_HORZ_VERT_ACTIVE 0x0278
+#define CRTC_MORE_CNTL 0x027C
+#define CRTC_H_CUTOFF_ACTIVE_EN (1<<4)
+#define CRTC_V_CUTOFF_ACTIVE_EN (1<<5)
+#define DAC_EXT_CNTL 0x0280
+#define FP_GEN_CNTL 0x0284
+#define FP_HORZ_STRETCH 0x028C
+#define FP_VERT_STRETCH 0x0290
+#define FP_H_SYNC_STRT_WID 0x02C4
+#define FP_V_SYNC_STRT_WID 0x02C8
+#define AUX_WINDOW_HORZ_CNTL 0x02D8
+#define AUX_WINDOW_VERT_CNTL 0x02DC
+/* #define DDA_CONFIG 0x02e0 */
+/* #define DDA_ON_OFF 0x02e4 */
+#define DVI_I2C_CNTL_1 0x02e4
+#define GRPH_BUFFER_CNTL 0x02F0
+#define GRPH2_BUFFER_CNTL 0x03F0
+#define VGA_BUFFER_CNTL 0x02F4
+#define OV0_Y_X_START 0x0400
+#define OV0_Y_X_END 0x0404
+#define OV0_PIPELINE_CNTL 0x0408
+#define OV0_REG_LOAD_CNTL 0x0410
+#define OV0_SCALE_CNTL 0x0420
+#define OV0_V_INC 0x0424
+#define OV0_P1_V_ACCUM_INIT 0x0428
+#define OV0_P23_V_ACCUM_INIT 0x042C
+#define OV0_P1_BLANK_LINES_AT_TOP 0x0430
+#define OV0_P23_BLANK_LINES_AT_TOP 0x0434
+#define OV0_BASE_ADDR 0x043C
+#define OV0_VID_BUF0_BASE_ADRS 0x0440
+#define OV0_VID_BUF1_BASE_ADRS 0x0444
+#define OV0_VID_BUF2_BASE_ADRS 0x0448
+#define OV0_VID_BUF3_BASE_ADRS 0x044C
+#define OV0_VID_BUF4_BASE_ADRS 0x0450
+#define OV0_VID_BUF5_BASE_ADRS 0x0454
+#define OV0_VID_BUF_PITCH0_VALUE 0x0460
+#define OV0_VID_BUF_PITCH1_VALUE 0x0464
+#define OV0_AUTO_FLIP_CNTRL 0x0470
+#define OV0_DEINTERLACE_PATTERN 0x0474
+#define OV0_SUBMIT_HISTORY 0x0478
+#define OV0_H_INC 0x0480
+#define OV0_STEP_BY 0x0484
+#define OV0_P1_H_ACCUM_INIT 0x0488
+#define OV0_P23_H_ACCUM_INIT 0x048C
+#define OV0_P1_X_START_END 0x0494
+#define OV0_P2_X_START_END 0x0498
+#define OV0_P3_X_START_END 0x049C
+#define OV0_FILTER_CNTL 0x04A0
+#define OV0_FOUR_TAP_COEF_0 0x04B0
+#define OV0_FOUR_TAP_COEF_1 0x04B4
+#define OV0_FOUR_TAP_COEF_2 0x04B8
+#define OV0_FOUR_TAP_COEF_3 0x04BC
+#define OV0_FOUR_TAP_COEF_4 0x04C0
+#define OV0_FLAG_CNTRL 0x04DC
+#define OV0_SLICE_CNTL 0x04E0
+#define OV0_VID_KEY_CLR_LOW 0x04E4
+#define OV0_VID_KEY_CLR_HIGH 0x04E8
+#define OV0_GRPH_KEY_CLR_LOW 0x04EC
+#define OV0_GRPH_KEY_CLR_HIGH 0x04F0
+#define OV0_KEY_CNTL 0x04F4
+#define OV0_TEST 0x04F8
+#define SUBPIC_CNTL 0x0540
+#define SUBPIC_DEFCOLCON 0x0544
+#define SUBPIC_Y_X_START 0x054C
+#define SUBPIC_Y_X_END 0x0550
+#define SUBPIC_V_INC 0x0554
+#define SUBPIC_H_INC 0x0558
+#define SUBPIC_BUF0_OFFSET 0x055C
+#define SUBPIC_BUF1_OFFSET 0x0560
+#define SUBPIC_LC0_OFFSET 0x0564
+#define SUBPIC_LC1_OFFSET 0x0568
+#define SUBPIC_PITCH 0x056C
+#define SUBPIC_BTN_HLI_COLCON 0x0570
+#define SUBPIC_BTN_HLI_Y_X_START 0x0574
+#define SUBPIC_BTN_HLI_Y_X_END 0x0578
+#define SUBPIC_PALETTE_INDEX 0x057C
+#define SUBPIC_PALETTE_DATA 0x0580
+#define SUBPIC_H_ACCUM_INIT 0x0584
+#define SUBPIC_V_ACCUM_INIT 0x0588
+#define DISP_MISC_CNTL 0x0D00
+#define DAC_MACRO_CNTL 0x0D04
+#define DISP_PWR_MAN 0x0D08
+#define DISP_TEST_DEBUG_CNTL 0x0D10
+#define DISP_HW_DEBUG 0x0D14
+#define DAC_CRC_SIG1 0x0D18
+#define DAC_CRC_SIG2 0x0D1C
+#define OV0_LIN_TRANS_A 0x0D20
+#define OV0_LIN_TRANS_B 0x0D24
+#define OV0_LIN_TRANS_C 0x0D28
+#define OV0_LIN_TRANS_D 0x0D2C
+#define OV0_LIN_TRANS_E 0x0D30
+#define OV0_LIN_TRANS_F 0x0D34
+#define OV0_GAMMA_0_F 0x0D40
+#define OV0_GAMMA_10_1F 0x0D44
+#define OV0_GAMMA_20_3F 0x0D48
+#define OV0_GAMMA_40_7F 0x0D4C
+#define OV0_GAMMA_380_3BF 0x0D50
+#define OV0_GAMMA_3C0_3FF 0x0D54
+#define DISP_MERGE_CNTL 0x0D60
+#define DISP_OUTPUT_CNTL 0x0D64
+#define DISP_LIN_TRANS_GRPH_A 0x0D80
+#define DISP_LIN_TRANS_GRPH_B 0x0D84
+#define DISP_LIN_TRANS_GRPH_C 0x0D88
+#define DISP_LIN_TRANS_GRPH_D 0x0D8C
+#define DISP_LIN_TRANS_GRPH_E 0x0D90
+#define DISP_LIN_TRANS_GRPH_F 0x0D94
+#define DISP_LIN_TRANS_VID_A 0x0D98
+#define DISP_LIN_TRANS_VID_B 0x0D9C
+#define DISP_LIN_TRANS_VID_C 0x0DA0
+#define DISP_LIN_TRANS_VID_D 0x0DA4
+#define DISP_LIN_TRANS_VID_E 0x0DA8
+#define DISP_LIN_TRANS_VID_F 0x0DAC
+#define RMX_HORZ_FILTER_0TAP_COEF 0x0DB0
+#define RMX_HORZ_FILTER_1TAP_COEF 0x0DB4
+#define RMX_HORZ_FILTER_2TAP_COEF 0x0DB8
+#define RMX_HORZ_PHASE 0x0DBC
+#define DAC_EMBEDDED_SYNC_CNTL 0x0DC0
+#define DAC_BROAD_PULSE 0x0DC4
+#define DAC_SKEW_CLKS 0x0DC8
+#define DAC_INCR 0x0DCC
+#define DAC_NEG_SYNC_LEVEL 0x0DD0
+#define DAC_POS_SYNC_LEVEL 0x0DD4
+#define DAC_BLANK_LEVEL 0x0DD8
+#define CLOCK_CNTL_INDEX 0x0008
+#define CLOCK_CNTL_DATA 0x000C
+#define CP_RB_CNTL 0x0704
+#define CP_RB_BASE 0x0700
+#define CP_RB_RPTR_ADDR 0x070C
+#define CP_RB_RPTR 0x0710
+#define CP_RB_WPTR 0x0714
+#define CP_RB_WPTR_DELAY 0x0718
+#define CP_IB_BASE 0x0738
+#define CP_IB_BUFSZ 0x073C
+#define SCRATCH_REG0 0x15E0
+#define GUI_SCRATCH_REG0 0x15E0
+#define SCRATCH_REG1 0x15E4
+#define GUI_SCRATCH_REG1 0x15E4
+#define SCRATCH_REG2 0x15E8
+#define GUI_SCRATCH_REG2 0x15E8
+#define SCRATCH_REG3 0x15EC
+#define GUI_SCRATCH_REG3 0x15EC
+#define SCRATCH_REG4 0x15F0
+#define GUI_SCRATCH_REG4 0x15F0
+#define SCRATCH_REG5 0x15F4
+#define GUI_SCRATCH_REG5 0x15F4
+#define SCRATCH_UMSK 0x0770
+#define SCRATCH_ADDR 0x0774
+#define DP_BRUSH_FRGD_CLR 0x147C
+#define DP_BRUSH_BKGD_CLR 0x1478
+#define DST_LINE_START 0x1600
+#define DST_LINE_END 0x1604
+#define SRC_OFFSET 0x15AC
+#define SRC_PITCH 0x15B0
+#define SRC_TILE 0x1704
+#define SRC_PITCH_OFFSET 0x1428
+#define SRC_X 0x1414
+#define SRC_Y 0x1418
+#define SRC_X_Y 0x1590
+#define SRC_Y_X 0x1434
+#define DST_Y_X 0x1438
+#define DST_WIDTH_HEIGHT 0x1598
+#define DST_HEIGHT_WIDTH 0x143c
+#define DST_OFFSET 0x1404
+#define SRC_CLUT_ADDRESS 0x1780
+#define SRC_CLUT_DATA 0x1784
+#define SRC_CLUT_DATA_RD 0x1788
+#define HOST_DATA0 0x17C0
+#define HOST_DATA1 0x17C4
+#define HOST_DATA2 0x17C8
+#define HOST_DATA3 0x17CC
+#define HOST_DATA4 0x17D0
+#define HOST_DATA5 0x17D4
+#define HOST_DATA6 0x17D8
+#define HOST_DATA7 0x17DC
+#define HOST_DATA_LAST 0x17E0
+#define DP_SRC_ENDIAN 0x15D4
+#define DP_SRC_FRGD_CLR 0x15D8
+#define DP_SRC_BKGD_CLR 0x15DC
+#define SC_LEFT 0x1640
+#define SC_RIGHT 0x1644
+#define SC_TOP 0x1648
+#define SC_BOTTOM 0x164C
+#define SRC_SC_RIGHT 0x1654
+#define SRC_SC_BOTTOM 0x165C
+#define DP_CNTL 0x16C0
+#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16D0
+#define DP_DATATYPE 0x16C4
+#define DP_MIX 0x16C8
+#define DP_WRITE_MSK 0x16CC
+#define DP_XOP 0x17F8
+#define CLR_CMP_CLR_SRC 0x15C4
+#define CLR_CMP_CLR_DST 0x15C8
+#define CLR_CMP_CNTL 0x15C0
+#define CLR_CMP_MSK 0x15CC
+#define DSTCACHE_MODE 0x1710
+#define DSTCACHE_CTLSTAT 0x1714
+#define DEFAULT_PITCH_OFFSET 0x16E0
+#define DEFAULT_SC_BOTTOM_RIGHT 0x16E8
+#define DEFAULT_SC_TOP_LEFT 0x16EC
+#define SRC_PITCH_OFFSET 0x1428
+#define DST_PITCH_OFFSET 0x142C
+#define DP_GUI_MASTER_CNTL 0x146C
+#define SC_TOP_LEFT 0x16EC
+#define SC_BOTTOM_RIGHT 0x16F0
+#define SRC_SC_BOTTOM_RIGHT 0x16F4
+#define RB2D_DSTCACHE_MODE 0x3428
+#define RB2D_DSTCACHE_CTLSTAT 0x342C
+#define LVDS_GEN_CNTL 0x02d0
+#define LVDS_PLL_CNTL 0x02d4
+#define FP2_GEN_CNTL 0x0288
+#define TMDS_CNTL 0x0294
+#define TMDS_CRC 0x02a0
+#define TMDS_TRANSMITTER_CNTL 0x02a4
+#define MPP_TB_CONFIG 0x01c0
+#define PAMAC0_DLY_CNTL 0x0a94
+#define PAMAC1_DLY_CNTL 0x0a98
+#define PAMAC2_DLY_CNTL 0x0a9c
+#define FW_CNTL 0x0118
+#define FCP_CNTL 0x0910
+#define VGA_DDA_ON_OFF 0x02ec
+#define TV_MASTER_CNTL 0x0800
+
+/* #define BASE_CODE 0x0f0b */
+#define BIOS_0_SCRATCH 0x0010
+#define BIOS_1_SCRATCH 0x0014
+#define BIOS_2_SCRATCH 0x0018
+#define BIOS_3_SCRATCH 0x001c
+#define BIOS_4_SCRATCH 0x0020
+#define BIOS_5_SCRATCH 0x0024
+#define BIOS_6_SCRATCH 0x0028
+#define BIOS_7_SCRATCH 0x002c
+
+#define HDP_SOFT_RESET (1 << 26)
+
+#define TV_DAC_CNTL 0x088c
+#define GPIOPAD_MASK 0x0198
+#define GPIOPAD_A 0x019c
+#define GPIOPAD_EN 0x01a0
+#define GPIOPAD_Y 0x01a4
+#define ZV_LCDPAD_MASK 0x01a8
+#define ZV_LCDPAD_A 0x01ac
+#define ZV_LCDPAD_EN 0x01b0
+#define ZV_LCDPAD_Y 0x01b4
+
+/* PLL Registers */
+#define CLK_PIN_CNTL 0x0001
+#define PPLL_CNTL 0x0002
+#define PPLL_REF_DIV 0x0003
+#define PPLL_DIV_0 0x0004
+#define PPLL_DIV_1 0x0005
+#define PPLL_DIV_2 0x0006
+#define PPLL_DIV_3 0x0007
+#define VCLK_ECP_CNTL 0x0008
+#define HTOTAL_CNTL 0x0009
+#define M_SPLL_REF_FB_DIV 0x000a
+#define AGP_PLL_CNTL 0x000b
+#define SPLL_CNTL 0x000c
+#define SCLK_CNTL 0x000d
+#define MPLL_CNTL 0x000e
+#define MDLL_CKO 0x000f
+#define MDLL_RDCKA 0x0010
+#define MCLK_CNTL 0x0012
+#define AGP_PLL_CNTL 0x000b
+#define PLL_TEST_CNTL 0x0013
+#define CLK_PWRMGT_CNTL 0x0014
+#define PLL_PWRMGT_CNTL 0x0015
+#define MCLK_MISC 0x001f
+#define P2PLL_CNTL 0x002a
+#define P2PLL_REF_DIV 0x002b
+#define PIXCLKS_CNTL 0x002d
+#define SCLK_MORE_CNTL 0x0035
+
+/* MCLK_CNTL bit constants */
+#define FORCEON_MCLKA (1 << 16)
+#define FORCEON_MCLKB (1 << 17)
+#define FORCEON_YCLKA (1 << 18)
+#define FORCEON_YCLKB (1 << 19)
+#define FORCEON_MC (1 << 20)
+#define FORCEON_AIC (1 << 21)
+
+/* SCLK_CNTL bit constants */
+#define DYN_STOP_LAT_MASK 0x00007ff8
+#define CP_MAX_DYN_STOP_LAT 0x0008
+#define SCLK_FORCEON_MASK 0xffff8000
+
+/* SCLK_MORE_CNTL bit constants */
+#define SCLK_MORE_FORCEON 0x0700
+
+/* BUS_CNTL bit constants */
+#define BUS_DBL_RESYNC 0x00000001
+#define BUS_MSTR_RESET 0x00000002
+#define BUS_FLUSH_BUF 0x00000004
+#define BUS_STOP_REQ_DIS 0x00000008
+#define BUS_ROTATION_DIS 0x00000010
+#define BUS_MASTER_DIS 0x00000040
+#define BUS_ROM_WRT_EN 0x00000080
+#define BUS_DIS_ROM 0x00001000
+#define BUS_PCI_READ_RETRY_EN 0x00002000
+#define BUS_AGP_AD_STEPPING_EN 0x00004000
+#define BUS_PCI_WRT_RETRY_EN 0x00008000
+#define BUS_MSTR_RD_MULT 0x00100000
+#define BUS_MSTR_RD_LINE 0x00200000
+#define BUS_SUSPEND 0x00400000
+#define LAT_16X 0x00800000
+#define BUS_RD_DISCARD_EN 0x01000000
+#define BUS_RD_ABORT_EN 0x02000000
+#define BUS_MSTR_WS 0x04000000
+#define BUS_PARKING_DIS 0x08000000
+#define BUS_MSTR_DISCONNECT_EN 0x10000000
+#define BUS_WRT_BURST 0x20000000
+#define BUS_READ_BURST 0x40000000
+#define BUS_RDY_READ_DLY 0x80000000
+
+/* PIXCLKS_CNTL */
+#define PIX2CLK_SRC_SEL_MASK 0x03
+#define PIX2CLK_SRC_SEL_CPUCLK 0x00
+#define PIX2CLK_SRC_SEL_PSCANCLK 0x01
+#define PIX2CLK_SRC_SEL_BYTECLK 0x02
+#define PIX2CLK_SRC_SEL_P2PLLCLK 0x03
+#define PIX2CLK_ALWAYS_ONb (1<<6)
+#define PIX2CLK_DAC_ALWAYS_ONb (1<<7)
+#define PIXCLK_TV_SRC_SEL (1 << 8)
+#define PIXCLK_LVDS_ALWAYS_ONb (1 << 14)
+#define PIXCLK_TMDS_ALWAYS_ONb (1 << 15)
+
+
+/* CLOCK_CNTL_INDEX bit constants */
+#define PLL_WR_EN 0x00000080
+
+/* CONFIG_CNTL bit constants */
+#define CFG_VGA_RAM_EN 0x00000100
+#define CFG_ATI_REV_ID_MASK (0xf << 16)
+#define CFG_ATI_REV_A11 (0 << 16)
+#define CFG_ATI_REV_A12 (1 << 16)
+#define CFG_ATI_REV_A13 (2 << 16)
+
+/* CRTC_EXT_CNTL bit constants */
+#define VGA_ATI_LINEAR 0x00000008
+#define VGA_128KAP_PAGING 0x00000010
+#define XCRT_CNT_EN (1 << 6)
+#define CRTC_HSYNC_DIS (1 << 8)
+#define CRTC_VSYNC_DIS (1 << 9)
+#define CRTC_DISPLAY_DIS (1 << 10)
+#define CRTC_CRT_ON (1 << 15)
+
+
+/* DSTCACHE_CTLSTAT bit constants */
+#define RB2D_DC_FLUSH (3 << 0)
+#define RB2D_DC_FLUSH_ALL 0xf
+#define RB2D_DC_BUSY (1 << 31)
+
+
+/* CRTC_GEN_CNTL bit constants */
+#define CRTC_DBL_SCAN_EN 0x00000001
+#define CRTC_CUR_EN 0x00010000
+#define CRTC_INTERLACE_EN (1 << 1)
+#define CRTC_BYPASS_LUT_EN (1 << 14)
+#define CRTC_EXT_DISP_EN (1 << 24)
+#define CRTC_EN (1 << 25)
+#define CRTC_DISP_REQ_EN_B (1 << 26)
+
+/* CRTC_STATUS bit constants */
+#define CRTC_VBLANK 0x00000001
+
+/* CRTC2_GEN_CNTL bit constants */
+#define CRT2_ON (1 << 7)
+#define CRTC2_DISPLAY_DIS (1 << 23)
+#define CRTC2_EN (1 << 25)
+#define CRTC2_DISP_REQ_EN_B (1 << 26)
+
+/* CUR_OFFSET, CUR_HORZ_VERT_POSN, CUR_HORZ_VERT_OFF bit constants */
+#define CUR_LOCK 0x80000000
+
+/* GPIO bit constants */
+#define GPIO_A_0 (1 << 0)
+#define GPIO_A_1 (1 << 1)
+#define GPIO_Y_0 (1 << 8)
+#define GPIO_Y_1 (1 << 9)
+#define GPIO_EN_0 (1 << 16)
+#define GPIO_EN_1 (1 << 17)
+#define GPIO_MASK_0 (1 << 24)
+#define GPIO_MASK_1 (1 << 25)
+#define VGA_DDC_DATA_OUTPUT GPIO_A_0
+#define VGA_DDC_CLK_OUTPUT GPIO_A_1
+#define VGA_DDC_DATA_INPUT GPIO_Y_0
+#define VGA_DDC_CLK_INPUT GPIO_Y_1
+#define VGA_DDC_DATA_OUT_EN GPIO_EN_0
+#define VGA_DDC_CLK_OUT_EN GPIO_EN_1
+
+
+/* FP bit constants */
+#define FP_CRTC_H_TOTAL_MASK 000003ff
+#define FP_CRTC_H_DISP_MASK 0x01ff0000
+#define FP_CRTC_V_TOTAL_MASK 0x00000fff
+#define FP_CRTC_V_DISP_MASK 0x0fff0000
+#define FP_H_SYNC_STRT_CHAR_MASK 0x00001ff8
+#define FP_H_SYNC_WID_MASK 0x003f0000
+#define FP_V_SYNC_STRT_MASK 0x00000fff
+#define FP_V_SYNC_WID_MASK 0x001f0000
+#define FP_CRTC_H_TOTAL_SHIFT 0x00000000
+#define FP_CRTC_H_DISP_SHIFT 0x00000010
+#define FP_CRTC_V_TOTAL_SHIFT 0x00000000
+#define FP_CRTC_V_DISP_SHIFT 0x00000010
+#define FP_H_SYNC_STRT_CHAR_SHIFT 0x00000003
+#define FP_H_SYNC_WID_SHIFT 0x00000010
+#define FP_V_SYNC_STRT_SHIFT 0x00000000
+#define FP_V_SYNC_WID_SHIFT 0x00000010
+
+/* FP_GEN_CNTL bit constants */
+#define FP_FPON (1 << 0)
+#define FP_TMDS_EN (1 << 2)
+#define FP_PANEL_FORMAT (1 << 3)
+#define FP_EN_TMDS (1 << 7)
+#define FP_DETECT_SENSE (1 << 8)
+#define R200_FP_SOURCE_SEL_MASK (3 << 10)
+#define R200_FP_SOURCE_SEL_CRTC1 (0 << 10)
+#define R200_FP_SOURCE_SEL_CRTC2 (1 << 10)
+#define R200_FP_SOURCE_SEL_RMX (2 << 10)
+#define R200_FP_SOURCE_SEL_TRANS (3 << 10)
+#define FP_SEL_CRTC1 (0 << 13)
+#define FP_SEL_CRTC2 (1 << 13)
+#define FP_USE_VGA_HSYNC (1 << 14)
+#define FP_CRTC_DONT_SHADOW_HPAR (1 << 15)
+#define FP_CRTC_DONT_SHADOW_VPAR (1 << 16)
+#define FP_CRTC_DONT_SHADOW_HEND (1 << 17)
+#define FP_CRTC_USE_SHADOW_VEND (1 << 18)
+#define FP_RMX_HVSYNC_CONTROL_EN (1 << 20)
+#define FP_DFP_SYNC_SEL (1 << 21)
+#define FP_CRTC_LOCK_8DOT (1 << 22)
+#define FP_CRT_SYNC_SEL (1 << 23)
+#define FP_USE_SHADOW_EN (1 << 24)
+#define FP_CRT_SYNC_ALT (1 << 26)
+
+/* FP2_GEN_CNTL bit constants */
+#define FP2_BLANK_EN (1 << 1)
+#define FP2_ON (1 << 2)
+#define FP2_PANEL_FORMAT (1 << 3)
+#define FP2_SOURCE_SEL_MASK (3 << 10)
+#define FP2_SOURCE_SEL_CRTC2 (1 << 10)
+#define FP2_SRC_SEL_MASK (3 << 13)
+#define FP2_SRC_SEL_CRTC2 (1 << 13)
+#define FP2_FP_POL (1 << 16)
+#define FP2_LP_POL (1 << 17)
+#define FP2_SCK_POL (1 << 18)
+#define FP2_LCD_CNTL_MASK (7 << 19)
+#define FP2_PAD_FLOP_EN (1 << 22)
+#define FP2_CRC_EN (1 << 23)
+#define FP2_CRC_READ_EN (1 << 24)
+#define FP2_DV0_EN (1 << 25)
+#define FP2_DV0_RATE_SEL_SDR (1 << 26)
+
+
+/* LVDS_GEN_CNTL bit constants */
+#define LVDS_ON (1 << 0)
+#define LVDS_DISPLAY_DIS (1 << 1)
+#define LVDS_PANEL_TYPE (1 << 2)
+#define LVDS_PANEL_FORMAT (1 << 3)
+#define LVDS_EN (1 << 7)
+#define LVDS_BL_MOD_LEVEL_MASK 0x0000ff00
+#define LVDS_BL_MOD_LEVEL_SHIFT 8
+#define LVDS_BL_MOD_EN (1 << 16)
+#define LVDS_DIGON (1 << 18)
+#define LVDS_BLON (1 << 19)
+#define LVDS_SEL_CRTC2 (1 << 23)
+#define LVDS_STATE_MASK \
+ (LVDS_ON | LVDS_DISPLAY_DIS | LVDS_BL_MOD_LEVEL_MASK | LVDS_BLON)
+
+/* LVDS_PLL_CNTL bit constatns */
+#define HSYNC_DELAY_SHIFT 0x1c
+#define HSYNC_DELAY_MASK (0xf << 0x1c)
+
+/* TMDS_TRANSMITTER_CNTL bit constants */
+#define TMDS_PLL_EN (1 << 0)
+#define TMDS_PLLRST (1 << 1)
+#define TMDS_RAN_PAT_RST (1 << 7)
+#define TMDS_ICHCSEL (1 << 28)
+
+/* FP_HORZ_STRETCH bit constants */
+#define HORZ_STRETCH_RATIO_MASK 0xffff
+#define HORZ_STRETCH_RATIO_MAX 4096
+#define HORZ_PANEL_SIZE (0x1ff << 16)
+#define HORZ_PANEL_SHIFT 16
+#define HORZ_STRETCH_PIXREP (0 << 25)
+#define HORZ_STRETCH_BLEND (1 << 26)
+#define HORZ_STRETCH_ENABLE (1 << 25)
+#define HORZ_AUTO_RATIO (1 << 27)
+#define HORZ_FP_LOOP_STRETCH (0x7 << 28)
+#define HORZ_AUTO_RATIO_INC (1 << 31)
+
+
+/* FP_VERT_STRETCH bit constants */
+#define VERT_STRETCH_RATIO_MASK 0xfff
+#define VERT_STRETCH_RATIO_MAX 4096
+#define VERT_PANEL_SIZE (0xfff << 12)
+#define VERT_PANEL_SHIFT 12
+#define VERT_STRETCH_LINREP (0 << 26)
+#define VERT_STRETCH_BLEND (1 << 26)
+#define VERT_STRETCH_ENABLE (1 << 25)
+#define VERT_AUTO_RATIO_EN (1 << 27)
+#define VERT_FP_LOOP_STRETCH (0x7 << 28)
+#define VERT_STRETCH_RESERVED 0xf1000000
+
+/* DAC_CNTL bit constants */
+#define DAC_8BIT_EN 0x00000100
+#define DAC_4BPP_PIX_ORDER 0x00000200
+#define DAC_CRC_EN 0x00080000
+#define DAC_MASK_ALL (0xff << 24)
+#define DAC_PDWN (1 << 15)
+#define DAC_EXPAND_MODE (1 << 14)
+#define DAC_VGA_ADR_EN (1 << 13)
+#define DAC_RANGE_CNTL (3 << 0)
+#define DAC_RANGE_CNTL_MASK 0x03
+#define DAC_BLANKING (1 << 2)
+#define DAC_CMP_EN (1 << 3)
+#define DAC_CMP_OUTPUT (1 << 7)
+
+/* DAC_CNTL2 bit constants */
+#define DAC2_EXPAND_MODE (1 << 14)
+#define DAC2_CMP_EN (1 << 7)
+#define DAC2_PALETTE_ACCESS_CNTL (1 << 5)
+
+/* DAC_EXT_CNTL bit constants */
+#define DAC_FORCE_BLANK_OFF_EN (1 << 4)
+#define DAC_FORCE_DATA_EN (1 << 5)
+#define DAC_FORCE_DATA_SEL_MASK (3 << 6)
+#define DAC_FORCE_DATA_MASK 0x0003ff00
+#define DAC_FORCE_DATA_SHIFT 8
+
+/* GEN_RESET_CNTL bit constants */
+#define SOFT_RESET_GUI 0x00000001
+#define SOFT_RESET_VCLK 0x00000100
+#define SOFT_RESET_PCLK 0x00000200
+#define SOFT_RESET_ECP 0x00000400
+#define SOFT_RESET_DISPENG_XCLK 0x00000800
+
+/* MEM_CNTL bit constants */
+#define MEM_CTLR_STATUS_IDLE 0x00000000
+#define MEM_CTLR_STATUS_BUSY 0x00100000
+#define MEM_SEQNCR_STATUS_IDLE 0x00000000
+#define MEM_SEQNCR_STATUS_BUSY 0x00200000
+#define MEM_ARBITER_STATUS_IDLE 0x00000000
+#define MEM_ARBITER_STATUS_BUSY 0x00400000
+#define MEM_REQ_UNLOCK 0x00000000
+#define MEM_REQ_LOCK 0x00800000
+#define MEM_NUM_CHANNELS_MASK 0x00000001
+#define MEM_USE_B_CH_ONLY 0x00000002
+#define RV100_MEM_HALF_MODE 0x00000008
+#define R300_MEM_NUM_CHANNELS_MASK 0x00000003
+#define R300_MEM_USE_CD_CH_ONLY 0x00000004
+
+
+/* RBBM_SOFT_RESET bit constants */
+#define SOFT_RESET_CP (1 << 0)
+#define SOFT_RESET_HI (1 << 1)
+#define SOFT_RESET_SE (1 << 2)
+#define SOFT_RESET_RE (1 << 3)
+#define SOFT_RESET_PP (1 << 4)
+#define SOFT_RESET_E2 (1 << 5)
+#define SOFT_RESET_RB (1 << 6)
+#define SOFT_RESET_HDP (1 << 7)
+
+/* SURFACE_CNTL bit consants */
+#define SURF_TRANSLATION_DIS (1 << 8)
+#define NONSURF_AP0_SWP_16BPP (1 << 20)
+#define NONSURF_AP0_SWP_32BPP (1 << 21)
+#define NONSURF_AP1_SWP_16BPP (1 << 22)
+#define NONSURF_AP1_SWP_32BPP (1 << 23)
+
+/* DEFAULT_SC_BOTTOM_RIGHT bit constants */
+#define DEFAULT_SC_RIGHT_MAX (0x1fff << 0)
+#define DEFAULT_SC_BOTTOM_MAX (0x1fff << 16)
+
+/* MM_INDEX bit constants */
+#define MM_APER 0x80000000
+
+/* CLR_CMP_CNTL bit constants */
+#define COMPARE_SRC_FALSE 0x00000000
+#define COMPARE_SRC_TRUE 0x00000001
+#define COMPARE_SRC_NOT_EQUAL 0x00000004
+#define COMPARE_SRC_EQUAL 0x00000005
+#define COMPARE_SRC_EQUAL_FLIP 0x00000007
+#define COMPARE_DST_FALSE 0x00000000
+#define COMPARE_DST_TRUE 0x00000100
+#define COMPARE_DST_NOT_EQUAL 0x00000400
+#define COMPARE_DST_EQUAL 0x00000500
+#define COMPARE_DESTINATION 0x00000000
+#define COMPARE_SOURCE 0x01000000
+#define COMPARE_SRC_AND_DST 0x02000000
+
+
+/* DP_CNTL bit constants */
+#define DST_X_RIGHT_TO_LEFT 0x00000000
+#define DST_X_LEFT_TO_RIGHT 0x00000001
+#define DST_Y_BOTTOM_TO_TOP 0x00000000
+#define DST_Y_TOP_TO_BOTTOM 0x00000002
+#define DST_X_MAJOR 0x00000000
+#define DST_Y_MAJOR 0x00000004
+#define DST_X_TILE 0x00000008
+#define DST_Y_TILE 0x00000010
+#define DST_LAST_PEL 0x00000020
+#define DST_TRAIL_X_RIGHT_TO_LEFT 0x00000000
+#define DST_TRAIL_X_LEFT_TO_RIGHT 0x00000040
+#define DST_TRAP_FILL_RIGHT_TO_LEFT 0x00000000
+#define DST_TRAP_FILL_LEFT_TO_RIGHT 0x00000080
+#define DST_BRES_SIGN 0x00000100
+#define DST_HOST_BIG_ENDIAN_EN 0x00000200
+#define DST_POLYLINE_NONLAST 0x00008000
+#define DST_RASTER_STALL 0x00010000
+#define DST_POLY_EDGE 0x00040000
+
+
+/* DP_CNTL_YDIR_XDIR_YMAJOR bit constants (short version of DP_CNTL) */
+#define DST_X_MAJOR_S 0x00000000
+#define DST_Y_MAJOR_S 0x00000001
+#define DST_Y_BOTTOM_TO_TOP_S 0x00000000
+#define DST_Y_TOP_TO_BOTTOM_S 0x00008000
+#define DST_X_RIGHT_TO_LEFT_S 0x00000000
+#define DST_X_LEFT_TO_RIGHT_S 0x80000000
+
+
+/* DP_DATATYPE bit constants */
+#define DST_8BPP 0x00000002
+#define DST_15BPP 0x00000003
+#define DST_16BPP 0x00000004
+#define DST_24BPP 0x00000005
+#define DST_32BPP 0x00000006
+#define DST_8BPP_RGB332 0x00000007
+#define DST_8BPP_Y8 0x00000008
+#define DST_8BPP_RGB8 0x00000009
+#define DST_16BPP_VYUY422 0x0000000b
+#define DST_16BPP_YVYU422 0x0000000c
+#define DST_32BPP_AYUV444 0x0000000e
+#define DST_16BPP_ARGB4444 0x0000000f
+#define BRUSH_SOLIDCOLOR 0x00000d00
+#define SRC_MONO 0x00000000
+#define SRC_MONO_LBKGD 0x00010000
+#define SRC_DSTCOLOR 0x00030000
+#define BYTE_ORDER_MSB_TO_LSB 0x00000000
+#define BYTE_ORDER_LSB_TO_MSB 0x40000000
+#define DP_CONVERSION_TEMP 0x80000000
+#define HOST_BIG_ENDIAN_EN (1 << 29)
+
+
+/* DP_GUI_MASTER_CNTL bit constants */
+#define GMC_SRC_PITCH_OFFSET_DEFAULT 0x00000000
+#define GMC_SRC_PITCH_OFFSET_LEAVE 0x00000001
+#define GMC_DST_PITCH_OFFSET_DEFAULT 0x00000000
+#define GMC_DST_PITCH_OFFSET_LEAVE 0x00000002
+#define GMC_SRC_CLIP_DEFAULT 0x00000000
+#define GMC_SRC_CLIP_LEAVE 0x00000004
+#define GMC_DST_CLIP_DEFAULT 0x00000000
+#define GMC_DST_CLIP_LEAVE 0x00000008
+#define GMC_BRUSH_8x8MONO 0x00000000
+#define GMC_BRUSH_8x8MONO_LBKGD 0x00000010
+#define GMC_BRUSH_8x1MONO 0x00000020
+#define GMC_BRUSH_8x1MONO_LBKGD 0x00000030
+#define GMC_BRUSH_1x8MONO 0x00000040
+#define GMC_BRUSH_1x8MONO_LBKGD 0x00000050
+#define GMC_BRUSH_32x1MONO 0x00000060
+#define GMC_BRUSH_32x1MONO_LBKGD 0x00000070
+#define GMC_BRUSH_32x32MONO 0x00000080
+#define GMC_BRUSH_32x32MONO_LBKGD 0x00000090
+#define GMC_BRUSH_8x8COLOR 0x000000a0
+#define GMC_BRUSH_8x1COLOR 0x000000b0
+#define GMC_BRUSH_1x8COLOR 0x000000c0
+#define GMC_BRUSH_SOLID_COLOR 0x000000d0
+#define GMC_DST_8BPP 0x00000200
+#define GMC_DST_15BPP 0x00000300
+#define GMC_DST_16BPP 0x00000400
+#define GMC_DST_24BPP 0x00000500
+#define GMC_DST_32BPP 0x00000600
+#define GMC_DST_8BPP_RGB332 0x00000700
+#define GMC_DST_8BPP_Y8 0x00000800
+#define GMC_DST_8BPP_RGB8 0x00000900
+#define GMC_DST_16BPP_VYUY422 0x00000b00
+#define GMC_DST_16BPP_YVYU422 0x00000c00
+#define GMC_DST_32BPP_AYUV444 0x00000e00
+#define GMC_DST_16BPP_ARGB4444 0x00000f00
+#define GMC_SRC_MONO 0x00000000
+#define GMC_SRC_MONO_LBKGD 0x00001000
+#define GMC_SRC_DSTCOLOR 0x00003000
+#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000
+#define GMC_BYTE_ORDER_LSB_TO_MSB 0x00004000
+#define GMC_DP_CONVERSION_TEMP_9300 0x00008000
+#define GMC_DP_CONVERSION_TEMP_6500 0x00000000
+#define GMC_DP_SRC_RECT 0x02000000
+#define GMC_DP_SRC_HOST 0x03000000
+#define GMC_DP_SRC_HOST_BYTEALIGN 0x04000000
+#define GMC_3D_FCN_EN_CLR 0x00000000
+#define GMC_3D_FCN_EN_SET 0x08000000
+#define GMC_DST_CLR_CMP_FCN_LEAVE 0x00000000
+#define GMC_DST_CLR_CMP_FCN_CLEAR 0x10000000
+#define GMC_AUX_CLIP_LEAVE 0x00000000
+#define GMC_AUX_CLIP_CLEAR 0x20000000
+#define GMC_WRITE_MASK_LEAVE 0x00000000
+#define GMC_WRITE_MASK_SET 0x40000000
+#define GMC_CLR_CMP_CNTL_DIS (1 << 28)
+#define GMC_SRC_DATATYPE_COLOR (3 << 12)
+#define ROP3_S 0x00cc0000
+#define ROP3_SRCCOPY 0x00cc0000
+#define ROP3_P 0x00f00000
+#define ROP3_PATCOPY 0x00f00000
+#define DP_SRC_SOURCE_MASK (7 << 24)
+#define GMC_BRUSH_NONE (15 << 4)
+#define DP_SRC_SOURCE_MEMORY (2 << 24)
+#define GMC_BRUSH_SOLIDCOLOR 0x000000d0
+
+/* DP_MIX bit constants */
+#define DP_SRC_RECT 0x00000200
+#define DP_SRC_HOST 0x00000300
+#define DP_SRC_HOST_BYTEALIGN 0x00000400
+
+/* MPLL_CNTL bit constants */
+#define MPLL_RESET 0x00000001
+
+/* MDLL_CKO bit constants */
+#define MCKOA_SLEEP 0x00000001
+#define MCKOA_RESET 0x00000002
+#define MCKOA_REF_SKEW_MASK 0x00000700
+#define MCKOA_FB_SKEW_MASK 0x00007000
+
+/* MDLL_RDCKA bit constants */
+#define MRDCKA0_SLEEP 0x00000001
+#define MRDCKA0_RESET 0x00000002
+#define MRDCKA1_SLEEP 0x00010000
+#define MRDCKA1_RESET 0x00020000
+
+/* VCLK_ECP_CNTL constants */
+#define VCLK_SRC_SEL_MASK 0x03
+#define VCLK_SRC_SEL_CPUCLK 0x00
+#define VCLK_SRC_SEL_PSCANCLK 0x01
+#define VCLK_SRC_SEL_BYTECLK 0x02
+#define VCLK_SRC_SEL_PPLLCLK 0x03
+#define PIXCLK_ALWAYS_ONb 0x00000040
+#define PIXCLK_DAC_ALWAYS_ONb 0x00000080
+
+/* BUS_CNTL1 constants */
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK 0x0c000000
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT 26
+#define BUS_CNTL1_AGPCLK_VALID 0x80000000
+
+/* PLL_PWRMGT_CNTL constants */
+#define PLL_PWRMGT_CNTL_SPLL_TURNOFF 0x00000002
+#define PLL_PWRMGT_CNTL_PPLL_TURNOFF 0x00000004
+#define PLL_PWRMGT_CNTL_P2PLL_TURNOFF 0x00000008
+#define PLL_PWRMGT_CNTL_TVPLL_TURNOFF 0x00000010
+#define PLL_PWRMGT_CNTL_MOBILE_SU 0x00010000
+#define PLL_PWRMGT_CNTL_SU_SCLK_USE_BCLK 0x00020000
+#define PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK 0x00040000
+
+/* TV_DAC_CNTL constants */
+#define TV_DAC_CNTL_BGSLEEP 0x00000040
+#define TV_DAC_CNTL_DETECT 0x00000010
+#define TV_DAC_CNTL_BGADJ_MASK 0x000f0000
+#define TV_DAC_CNTL_DACADJ_MASK 0x00f00000
+#define TV_DAC_CNTL_BGADJ__SHIFT 16
+#define TV_DAC_CNTL_DACADJ__SHIFT 20
+#define TV_DAC_CNTL_RDACPD 0x01000000
+#define TV_DAC_CNTL_GDACPD 0x02000000
+#define TV_DAC_CNTL_BDACPD 0x04000000
+
+/* DISP_MISC_CNTL constants */
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_PP (1 << 0)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_PP (1 << 1)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_PP (1 << 2)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_SCLK (1 << 4)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_SCLK (1 << 5)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_SCLK (1 << 6)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_PP (1 << 12)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_SCLK (1 << 15)
+#define DISP_MISC_CNTL_SOFT_RESET_LVDS (1 << 16)
+#define DISP_MISC_CNTL_SOFT_RESET_TMDS (1 << 17)
+#define DISP_MISC_CNTL_SOFT_RESET_DIG_TMDS (1 << 18)
+#define DISP_MISC_CNTL_SOFT_RESET_TV (1 << 19)
+
+/* DISP_PWR_MAN constants */
+#define DISP_PWR_MAN_DISP_PWR_MAN_D3_CRTC_EN (1 << 0)
+#define DISP_PWR_MAN_DISP2_PWR_MAN_D3_CRTC2_EN (1 << 4)
+#define DISP_PWR_MAN_DISP_D3_RST (1 << 16)
+#define DISP_PWR_MAN_DISP_D3_REG_RST (1 << 17)
+#define DISP_PWR_MAN_DISP_D3_GRPH_RST (1 << 18)
+#define DISP_PWR_MAN_DISP_D3_SUBPIC_RST (1 << 19)
+#define DISP_PWR_MAN_DISP_D3_OV0_RST (1 << 20)
+#define DISP_PWR_MAN_DISP_D1D2_GRPH_RST (1 << 21)
+#define DISP_PWR_MAN_DISP_D1D2_SUBPIC_RST (1 << 22)
+#define DISP_PWR_MAN_DISP_D1D2_OV0_RST (1 << 23)
+#define DISP_PWR_MAN_DIG_TMDS_ENABLE_RST (1 << 24)
+#define DISP_PWR_MAN_TV_ENABLE_RST (1 << 25)
+#define DISP_PWR_MAN_AUTO_PWRUP_EN (1 << 26)
+
+/* masks */
+
+#define CONFIG_MEMSIZE_MASK 0x1f000000
+#define MEM_CFG_TYPE 0x40000000
+#define DST_OFFSET_MASK 0x003fffff
+#define DST_PITCH_MASK 0x3fc00000
+#define DEFAULT_TILE_MASK 0xc0000000
+#define PPLL_DIV_SEL_MASK 0x00000300
+#define PPLL_RESET 0x00000001
+#define PPLL_SLEEP 0x00000002
+#define PPLL_ATOMIC_UPDATE_EN 0x00010000
+#define PPLL_REF_DIV_MASK 0x000003ff
+#define PPLL_FB3_DIV_MASK 0x000007ff
+#define PPLL_POST3_DIV_MASK 0x00070000
+#define PPLL_ATOMIC_UPDATE_R 0x00008000
+#define PPLL_ATOMIC_UPDATE_W 0x00008000
+#define PPLL_VGA_ATOMIC_UPDATE_EN 0x00020000
+#define R300_PPLL_REF_DIV_ACC_MASK (0x3ff << 18)
+#define R300_PPLL_REF_DIV_ACC_SHIFT 18
+
+#define GUI_ACTIVE 0x80000000
+
+
+#define MC_IND_INDEX 0x01F8
+#define MC_IND_DATA 0x01FC
+
+/* PAD_CTLR_STRENGTH */
+#define PAD_MANUAL_OVERRIDE 0x80000000
+
+/* pllCLK_PIN_CNTL */
+#define CLK_PIN_CNTL__OSC_EN_MASK 0x00000001L
+#define CLK_PIN_CNTL__OSC_EN 0x00000001L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN_MASK 0x00000004L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN 0x00000004L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN_MASK 0x00000010L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN 0x00000010L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE_MASK 0x00000020L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE 0x00000020L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN_MASK 0x00000800L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN 0x00000800L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN_MASK 0x00001000L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN 0x00001000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND_MASK 0x00002000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND 0x00002000L
+#define CLK_PIN_CNTL__CG_SPARE_MASK 0x00004000L
+#define CLK_PIN_CNTL__CG_SPARE 0x00004000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL_MASK 0x00008000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL 0x00008000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING_MASK 0x00010000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING 0x00010000L
+#define CLK_PIN_CNTL__CG_SPARE_RD_MASK 0x00060000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb_MASK 0x00080000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb 0x00080000L
+#define CLK_PIN_CNTL__PWRSEQ_DELAY_MASK 0xff000000L
+
+/* pllCLK_PWRMGT_CNTL */
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF__SHIFT 0x00000000
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF__SHIFT 0x00000001
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF__SHIFT 0x00000002
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF__SHIFT 0x00000003
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF__SHIFT 0x00000004
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF__SHIFT 0x00000005
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF__SHIFT 0x00000006
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF__SHIFT 0x00000007
+#define CLK_PWRMGT_CNTL__MC_CH_MODE__SHIFT 0x00000008
+#define CLK_PWRMGT_CNTL__TEST_MODE__SHIFT 0x00000009
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN__SHIFT 0x0000000a
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE__SHIFT 0x0000000c
+#define CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT__SHIFT 0x0000000d
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT__SHIFT 0x0000000f
+#define CLK_PWRMGT_CNTL__MC_BUSY__SHIFT 0x00000010
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL__SHIFT 0x00000011
+#define CLK_PWRMGT_CNTL__MC_SWITCH__SHIFT 0x00000012
+#define CLK_PWRMGT_CNTL__DLL_READY__SHIFT 0x00000013
+#define CLK_PWRMGT_CNTL__DISP_PM__SHIFT 0x00000014
+#define CLK_PWRMGT_CNTL__DYN_STOP_MODE__SHIFT 0x00000015
+#define CLK_PWRMGT_CNTL__CG_NO1_DEBUG__SHIFT 0x00000018
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF__SHIFT 0x0000001e
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF__SHIFT 0x0000001f
+
+/* pllP2PLL_CNTL */
+#define P2PLL_CNTL__P2PLL_RESET_MASK 0x00000001L
+#define P2PLL_CNTL__P2PLL_RESET 0x00000001L
+#define P2PLL_CNTL__P2PLL_SLEEP_MASK 0x00000002L
+#define P2PLL_CNTL__P2PLL_SLEEP 0x00000002L
+#define P2PLL_CNTL__P2PLL_TST_EN_MASK 0x00000004L
+#define P2PLL_CNTL__P2PLL_TST_EN 0x00000004L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL_MASK 0x00000010L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL 0x00000010L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL_MASK 0x00000020L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL 0x00000020L
+#define P2PLL_CNTL__P2PLL_TCPOFF_MASK 0x00000040L
+#define P2PLL_CNTL__P2PLL_TCPOFF 0x00000040L
+#define P2PLL_CNTL__P2PLL_TVCOMAX_MASK 0x00000080L
+#define P2PLL_CNTL__P2PLL_TVCOMAX 0x00000080L
+#define P2PLL_CNTL__P2PLL_PCP_MASK 0x00000700L
+#define P2PLL_CNTL__P2PLL_PVG_MASK 0x00003800L
+#define P2PLL_CNTL__P2PLL_PDC_MASK 0x0000c000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN_MASK 0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN 0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC_MASK 0x00040000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC 0x00040000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET_MASK 0x00080000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET 0x00080000L
+
+/* pllPIXCLKS_CNTL */
+#define PIXCLKS_CNTL__PIX2CLK_SRC_SEL__SHIFT 0x00000000
+#define PIXCLKS_CNTL__PIX2CLK_INVERT__SHIFT 0x00000004
+#define PIXCLKS_CNTL__PIX2CLK_SRC_INVERT__SHIFT 0x00000005
+#define PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb__SHIFT 0x00000006
+#define PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb__SHIFT 0x00000007
+#define PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL__SHIFT 0x00000008
+#define PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb__SHIFT 0x0000000b
+#define PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb__SHIFT 0x0000000c
+#define PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb__SHIFT 0x0000000d
+#define PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb__SHIFT 0x0000000e
+#define PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb__SHIFT 0x0000000f
+
+
+/* pllPIXCLKS_CNTL */
+#define PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK 0x00000003L
+#define PIXCLKS_CNTL__PIX2CLK_INVERT 0x00000010L
+#define PIXCLKS_CNTL__PIX2CLK_SRC_INVERT 0x00000020L
+#define PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb 0x00000040L
+#define PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb 0x00000080L
+#define PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL 0x00000100L
+#define PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb 0x00000800L
+#define PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb 0x00001000L
+#define PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb 0x00002000L
+#define PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb 0x00004000L
+#define PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb 0x00008000L
+#define PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb (1 << 9)
+#define PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb (1 << 10)
+#define PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb (1 << 13)
+#define PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb (1 << 16)
+#define PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb (1 << 17)
+#define PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb (1 << 18)
+#define PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb (1 << 19)
+#define PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF (1 << 23)
+
+
+/* pllP2PLL_DIV_0 */
+#define P2PLL_DIV_0__P2PLL_FB_DIV_MASK 0x000007ffL
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W_MASK 0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W 0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R_MASK 0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R 0x00008000L
+#define P2PLL_DIV_0__P2PLL_POST_DIV_MASK 0x00070000L
+
+/* pllSCLK_CNTL */
+#define SCLK_CNTL__SCLK_SRC_SEL_MASK 0x00000007L
+#define SCLK_CNTL__CP_MAX_DYN_STOP_LAT 0x00000008L
+#define SCLK_CNTL__HDP_MAX_DYN_STOP_LAT 0x00000010L
+#define SCLK_CNTL__TV_MAX_DYN_STOP_LAT 0x00000020L
+#define SCLK_CNTL__E2_MAX_DYN_STOP_LAT 0x00000040L
+#define SCLK_CNTL__SE_MAX_DYN_STOP_LAT 0x00000080L
+#define SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT 0x00000100L
+#define SCLK_CNTL__VIP_MAX_DYN_STOP_LAT 0x00000200L
+#define SCLK_CNTL__RE_MAX_DYN_STOP_LAT 0x00000400L
+#define SCLK_CNTL__PB_MAX_DYN_STOP_LAT 0x00000800L
+#define SCLK_CNTL__TAM_MAX_DYN_STOP_LAT 0x00001000L
+#define SCLK_CNTL__TDM_MAX_DYN_STOP_LAT 0x00002000L
+#define SCLK_CNTL__RB_MAX_DYN_STOP_LAT 0x00004000L
+#define SCLK_CNTL__DYN_STOP_LAT_MASK 0x00007ff8
+#define SCLK_CNTL__FORCE_DISP2 0x00008000L
+#define SCLK_CNTL__FORCE_CP 0x00010000L
+#define SCLK_CNTL__FORCE_HDP 0x00020000L
+#define SCLK_CNTL__FORCE_DISP1 0x00040000L
+#define SCLK_CNTL__FORCE_TOP 0x00080000L
+#define SCLK_CNTL__FORCE_E2 0x00100000L
+#define SCLK_CNTL__FORCE_SE 0x00200000L
+#define SCLK_CNTL__FORCE_IDCT 0x00400000L
+#define SCLK_CNTL__FORCE_VIP 0x00800000L
+#define SCLK_CNTL__FORCE_RE 0x01000000L
+#define SCLK_CNTL__FORCE_PB 0x02000000L
+#define SCLK_CNTL__FORCE_TAM 0x04000000L
+#define SCLK_CNTL__FORCE_TDM 0x08000000L
+#define SCLK_CNTL__FORCE_RB 0x10000000L
+#define SCLK_CNTL__FORCE_TV_SCLK 0x20000000L
+#define SCLK_CNTL__FORCE_SUBPIC 0x40000000L
+#define SCLK_CNTL__FORCE_OV0 0x80000000L
+#define SCLK_CNTL__R300_FORCE_VAP (1<<21)
+#define SCLK_CNTL__R300_FORCE_SR (1<<25)
+#define SCLK_CNTL__R300_FORCE_PX (1<<26)
+#define SCLK_CNTL__R300_FORCE_TX (1<<27)
+#define SCLK_CNTL__R300_FORCE_US (1<<28)
+#define SCLK_CNTL__R300_FORCE_SU (1<<30)
+#define SCLK_CNTL__FORCEON_MASK 0xffff8000L
+
+/* pllSCLK_CNTL2 */
+#define SCLK_CNTL2__R300_TCL_MAX_DYN_STOP_LAT (1<<10)
+#define SCLK_CNTL2__R300_GA_MAX_DYN_STOP_LAT (1<<11)
+#define SCLK_CNTL2__R300_CBA_MAX_DYN_STOP_LAT (1<<12)
+#define SCLK_CNTL2__R300_FORCE_TCL (1<<13)
+#define SCLK_CNTL2__R300_FORCE_CBA (1<<14)
+#define SCLK_CNTL2__R300_FORCE_GA (1<<15)
+
+/* SCLK_MORE_CNTL */
+#define SCLK_MORE_CNTL__DISPREGS_MAX_DYN_STOP_LAT 0x00000001L
+#define SCLK_MORE_CNTL__MC_GUI_MAX_DYN_STOP_LAT 0x00000002L
+#define SCLK_MORE_CNTL__MC_HOST_MAX_DYN_STOP_LAT 0x00000004L
+#define SCLK_MORE_CNTL__FORCE_DISPREGS 0x00000100L
+#define SCLK_MORE_CNTL__FORCE_MC_GUI 0x00000200L
+#define SCLK_MORE_CNTL__FORCE_MC_HOST 0x00000400L
+#define SCLK_MORE_CNTL__STOP_SCLK_EN 0x00001000L
+#define SCLK_MORE_CNTL__STOP_SCLK_A 0x00002000L
+#define SCLK_MORE_CNTL__STOP_SCLK_B 0x00004000L
+#define SCLK_MORE_CNTL__STOP_SCLK_C 0x00008000L
+#define SCLK_MORE_CNTL__HALF_SPEED_SCLK 0x00010000L
+#define SCLK_MORE_CNTL__IO_CG_VOLTAGE_DROP 0x00020000L
+#define SCLK_MORE_CNTL__TVFB_SOFT_RESET 0x00040000L
+#define SCLK_MORE_CNTL__VOLTAGE_DROP_SYNC 0x00080000L
+#define SCLK_MORE_CNTL__IDLE_DELAY_HALF_SCLK 0x00400000L
+#define SCLK_MORE_CNTL__AGP_BUSY_HALF_SCLK 0x00800000L
+#define SCLK_MORE_CNTL__CG_SPARE_RD_C_MASK 0xff000000L
+#define SCLK_MORE_CNTL__FORCEON 0x00000700L
+
+/* MCLK_CNTL */
+#define MCLK_CNTL__MCLKA_SRC_SEL_MASK 0x00000007L
+#define MCLK_CNTL__YCLKA_SRC_SEL_MASK 0x00000070L
+#define MCLK_CNTL__MCLKB_SRC_SEL_MASK 0x00000700L
+#define MCLK_CNTL__YCLKB_SRC_SEL_MASK 0x00007000L
+#define MCLK_CNTL__FORCE_MCLKA_MASK 0x00010000L
+#define MCLK_CNTL__FORCE_MCLKA 0x00010000L
+#define MCLK_CNTL__FORCE_MCLKB_MASK 0x00020000L
+#define MCLK_CNTL__FORCE_MCLKB 0x00020000L
+#define MCLK_CNTL__FORCE_YCLKA_MASK 0x00040000L
+#define MCLK_CNTL__FORCE_YCLKA 0x00040000L
+#define MCLK_CNTL__FORCE_YCLKB_MASK 0x00080000L
+#define MCLK_CNTL__FORCE_YCLKB 0x00080000L
+#define MCLK_CNTL__FORCE_MC_MASK 0x00100000L
+#define MCLK_CNTL__FORCE_MC 0x00100000L
+#define MCLK_CNTL__FORCE_AIC_MASK 0x00200000L
+#define MCLK_CNTL__FORCE_AIC 0x00200000L
+#define MCLK_CNTL__MRDCKA0_SOUTSEL_MASK 0x03000000L
+#define MCLK_CNTL__MRDCKA1_SOUTSEL_MASK 0x0c000000L
+#define MCLK_CNTL__MRDCKB0_SOUTSEL_MASK 0x30000000L
+#define MCLK_CNTL__MRDCKB1_SOUTSEL_MASK 0xc0000000L
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKA (1 << 21)
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKB (1 << 21)
+
+/* MCLK_MISC */
+#define MCLK_MISC__SCLK_SOURCED_FROM_MPLL_SEL_MASK 0x00000003L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL_MASK 0x00000004L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL 0x00000004L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL_MASK 0x00000008L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL 0x00000008L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN_MASK 0x00000010L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN 0x00000010L
+#define MCLK_MISC__DLL_READY_LAT_MASK 0x00000100L
+#define MCLK_MISC__DLL_READY_LAT 0x00000100L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT_MASK 0x00001000L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT 0x00001000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT_MASK 0x00002000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT 0x00002000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE_MASK 0x00004000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE 0x00004000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE_MASK 0x00008000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE 0x00008000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN_MASK 0x00010000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN 0x00010000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL_MASK 0x00020000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL 0x00020000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND_MASK 0x00040000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND 0x00040000L
+#define MCLK_MISC__CGM_SPARE_RD_MASK 0x00300000L
+#define MCLK_MISC__CGM_SPARE_A_RD_MASK 0x00c00000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN_MASK 0x01000000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN 0x01000000L
+#define MCLK_MISC__CGM_SPARE_A_MASK 0x0e000000L
+
+/* VCLK_ECP_CNTL */
+#define VCLK_ECP_CNTL__VCLK_SRC_SEL_MASK 0x00000003L
+#define VCLK_ECP_CNTL__VCLK_INVERT 0x00000010L
+#define VCLK_ECP_CNTL__PIXCLK_SRC_INVERT 0x00000020L
+#define VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb 0x00000040L
+#define VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb 0x00000080L
+#define VCLK_ECP_CNTL__ECP_DIV_MASK 0x00000300L
+#define VCLK_ECP_CNTL__ECP_FORCE_ON 0x00040000L
+#define VCLK_ECP_CNTL__SUBCLK_FORCE_ON 0x00080000L
+#define VCLK_ECP_CNTL__R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF (1<<23)
+
+/* PLL_PWRMGT_CNTL */
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF_MASK 0x00000001L
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF 0x00000001L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF_MASK 0x00000002L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF 0x00000002L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF_MASK 0x00000004L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF 0x00000004L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF_MASK 0x00000008L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF 0x00000008L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF_MASK 0x00000010L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF 0x00000010L
+#define PLL_PWRMGT_CNTL__AGPCLK_DYN_STOP_LAT_MASK 0x000001e0L
+#define PLL_PWRMGT_CNTL__APM_POWER_STATE_MASK 0x00000600L
+#define PLL_PWRMGT_CNTL__APM_PWRSTATE_RD_MASK 0x00001800L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL_MASK 0x00002000L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL 0x00002000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND_MASK 0x00004000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND 0x00004000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND_MASK 0x00008000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND 0x00008000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU_MASK 0x00010000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU 0x00010000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK_MASK 0x00020000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK 0x00020000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK_MASK 0x00040000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK 0x00040000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE_MASK 0x00080000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE 0x00080000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE_MASK 0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE 0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_CTIVE_RD_MASK 0x00200000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_ACTIVE_RD 0x00200000L
+#define PLL_PWRMGT_CNTL__CG_NO2_DEBUG_MASK 0xff000000L
+
+/* CLK_PWRMGT_CNTL */
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF_MASK 0x00000001L
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF 0x00000001L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF_MASK 0x00000002L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF 0x00000002L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF_MASK 0x00000004L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF 0x00000004L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF_MASK 0x00000008L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF 0x00000008L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF_MASK 0x00000010L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF 0x00000010L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF_MASK 0x00000020L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF 0x00000020L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF_MASK 0x00000040L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF 0x00000040L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF_MASK 0x00000080L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF 0x00000080L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE_MASK 0x00000100L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE 0x00000100L
+#define CLK_PWRMGT_CNTL__TEST_MODE_MASK 0x00000200L
+#define CLK_PWRMGT_CNTL__TEST_MODE 0x00000200L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN_MASK 0x00000400L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN 0x00000400L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE_MASK 0x00001000L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE 0x00001000L
+#define CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK 0x00006000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT_MASK 0x00008000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT 0x00008000L
+#define CLK_PWRMGT_CNTL__MC_BUSY_MASK 0x00010000L
+#define CLK_PWRMGT_CNTL__MC_BUSY 0x00010000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL_MASK 0x00020000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL 0x00020000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH_MASK 0x00040000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH 0x00040000L
+#define CLK_PWRMGT_CNTL__DLL_READY_MASK 0x00080000L
+#define CLK_PWRMGT_CNTL__DLL_READY 0x00080000L
+#define CLK_PWRMGT_CNTL__DISP_PM_MASK 0x00100000L
+#define CLK_PWRMGT_CNTL__DISP_PM 0x00100000L
+#define CLK_PWRMGT_CNTL__DYN_STOP_MODE_MASK 0x00e00000L
+#define CLK_PWRMGT_CNTL__CG_NO1_DEBUG_MASK 0x3f000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF_MASK 0x40000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF 0x40000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF_MASK 0x80000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF 0x80000000L
+
+/* BUS_CNTL1 */
+#define BUS_CNTL1__PMI_IO_DISABLE_MASK 0x00000001L
+#define BUS_CNTL1__PMI_IO_DISABLE 0x00000001L
+#define BUS_CNTL1__PMI_MEM_DISABLE_MASK 0x00000002L
+#define BUS_CNTL1__PMI_MEM_DISABLE 0x00000002L
+#define BUS_CNTL1__PMI_BM_DISABLE_MASK 0x00000004L
+#define BUS_CNTL1__PMI_BM_DISABLE 0x00000004L
+#define BUS_CNTL1__PMI_INT_DISABLE_MASK 0x00000008L
+#define BUS_CNTL1__PMI_INT_DISABLE 0x00000008L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE_MASK 0x00000020L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE 0x00000020L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS_MASK 0x00000100L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS 0x00000100L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS_MASK 0x00000200L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS 0x00000200L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS_MASK 0x00000400L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS 0x00000400L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS_MASK 0x00000800L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS 0x00000800L
+#define BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK 0x0c000000L
+#define BUS_CNTL1__SEND_SBA_LATENCY_MASK 0x70000000L
+#define BUS_CNTL1__AGPCLK_VALID_MASK 0x80000000L
+#define BUS_CNTL1__AGPCLK_VALID 0x80000000L
+
+/* BUS_CNTL1 */
+#define BUS_CNTL1__PMI_IO_DISABLE__SHIFT 0x00000000
+#define BUS_CNTL1__PMI_MEM_DISABLE__SHIFT 0x00000001
+#define BUS_CNTL1__PMI_BM_DISABLE__SHIFT 0x00000002
+#define BUS_CNTL1__PMI_INT_DISABLE__SHIFT 0x00000003
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE__SHIFT 0x00000005
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS__SHIFT 0x00000008
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS__SHIFT 0x00000009
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS__SHIFT 0x0000000a
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS__SHIFT 0x0000000b
+#define BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT 0x0000001a
+#define BUS_CNTL1__SEND_SBA_LATENCY__SHIFT 0x0000001c
+#define BUS_CNTL1__AGPCLK_VALID__SHIFT 0x0000001f
+
+/* CRTC_OFFSET_CNTL */
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_MASK 0x0000000fL
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_RIGHT_MASK 0x000000f0L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT_MASK 0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT 0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_MASK 0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN 0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL_MASK 0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL 0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN_MASK 0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN 0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_EN_MASK 0x000c0000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN_MASK 0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN 0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_MASK 0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC 0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN_MASK 0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN 0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN_MASK 0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN 0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_MASK 0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET 0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK_MASK 0x80000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK 0x80000000L
+
+/* CRTC_GEN_CNTL */
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN_MASK 0x00000001L
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN 0x00000001L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN_MASK 0x00000002L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN 0x00000002L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN_MASK 0x00000010L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN 0x00000010L
+#define CRTC_GEN_CNTL__CRTC_PIX_WIDTH_MASK 0x00000f00L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN_MASK 0x00008000L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN 0x00008000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN_MASK 0x00010000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN 0x00010000L
+#define CRTC_GEN_CNTL__CRTC_VSTAT_MODE_MASK 0x00060000L
+#define CRTC_GEN_CNTL__CRTC_CUR_MODE_MASK 0x00700000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN_MASK 0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN 0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EN_MASK 0x02000000L
+#define CRTC_GEN_CNTL__CRTC_EN 0x02000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B_MASK 0x04000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B 0x04000000L
+
+/* CRTC2_GEN_CNTL */
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN_MASK 0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN 0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN_MASK 0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN 0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE_MASK 0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE 0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE_MASK 0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE 0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE_MASK 0x00000040L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE 0x00000040L
+#define CRTC2_GEN_CNTL__CRT2_ON_MASK 0x00000080L
+#define CRTC2_GEN_CNTL__CRT2_ON 0x00000080L
+#define CRTC2_GEN_CNTL__CRTC2_PIX_WIDTH_MASK 0x00000f00L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN_MASK 0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN 0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN_MASK 0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN 0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_MODE_MASK 0x00700000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS_MASK 0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS 0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_EN_MASK 0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_EN 0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B_MASK 0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B 0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN_MASK 0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN 0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS_MASK 0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS 0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS_MASK 0x20000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS 0x20000000L
+
+/* AGP_CNTL */
+#define AGP_CNTL__MAX_IDLE_CLK_MASK 0x000000ffL
+#define AGP_CNTL__HOLD_RD_FIFO_MASK 0x00000100L
+#define AGP_CNTL__HOLD_RD_FIFO 0x00000100L
+#define AGP_CNTL__HOLD_RQ_FIFO_MASK 0x00000200L
+#define AGP_CNTL__HOLD_RQ_FIFO 0x00000200L
+#define AGP_CNTL__EN_2X_STBB_MASK 0x00000400L
+#define AGP_CNTL__EN_2X_STBB 0x00000400L
+#define AGP_CNTL__FORCE_FULL_SBA_MASK 0x00000800L
+#define AGP_CNTL__FORCE_FULL_SBA 0x00000800L
+#define AGP_CNTL__SBA_DIS_MASK 0x00001000L
+#define AGP_CNTL__SBA_DIS 0x00001000L
+#define AGP_CNTL__AGP_REV_ID_MASK 0x00002000L
+#define AGP_CNTL__AGP_REV_ID 0x00002000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X_MASK 0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X 0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X_MASK 0x00008000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X 0x00008000L
+#define AGP_CNTL__FORCE_INT_VREF_MASK 0x00010000L
+#define AGP_CNTL__FORCE_INT_VREF 0x00010000L
+#define AGP_CNTL__PENDING_SLOTS_VAL_MASK 0x00060000L
+#define AGP_CNTL__PENDING_SLOTS_SEL_MASK 0x00080000L
+#define AGP_CNTL__PENDING_SLOTS_SEL 0x00080000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X_MASK 0x00100000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X 0x00100000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX_MASK 0x00200000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX 0x00200000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET_MASK 0x00400000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET 0x00400000L
+#define AGP_CNTL__EN_RBFCALM_MASK 0x00800000L
+#define AGP_CNTL__EN_RBFCALM 0x00800000L
+#define AGP_CNTL__FORCE_EXT_VREF_MASK 0x01000000L
+#define AGP_CNTL__FORCE_EXT_VREF 0x01000000L
+#define AGP_CNTL__DIS_RBF_MASK 0x02000000L
+#define AGP_CNTL__DIS_RBF 0x02000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN_MASK 0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN 0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_VAL_MASK 0x38000000L
+#define AGP_CNTL__AGP_MISC_MASK 0xc0000000L
+
+/* AGP_CNTL */
+#define AGP_CNTL__MAX_IDLE_CLK__SHIFT 0x00000000
+#define AGP_CNTL__HOLD_RD_FIFO__SHIFT 0x00000008
+#define AGP_CNTL__HOLD_RQ_FIFO__SHIFT 0x00000009
+#define AGP_CNTL__EN_2X_STBB__SHIFT 0x0000000a
+#define AGP_CNTL__FORCE_FULL_SBA__SHIFT 0x0000000b
+#define AGP_CNTL__SBA_DIS__SHIFT 0x0000000c
+#define AGP_CNTL__AGP_REV_ID__SHIFT 0x0000000d
+#define AGP_CNTL__REG_CRIPPLE_AGP4X__SHIFT 0x0000000e
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X__SHIFT 0x0000000f
+#define AGP_CNTL__FORCE_INT_VREF__SHIFT 0x00000010
+#define AGP_CNTL__PENDING_SLOTS_VAL__SHIFT 0x00000011
+#define AGP_CNTL__PENDING_SLOTS_SEL__SHIFT 0x00000013
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X__SHIFT 0x00000014
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX__SHIFT 0x00000015
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET__SHIFT 0x00000016
+#define AGP_CNTL__EN_RBFCALM__SHIFT 0x00000017
+#define AGP_CNTL__FORCE_EXT_VREF__SHIFT 0x00000018
+#define AGP_CNTL__DIS_RBF__SHIFT 0x00000019
+#define AGP_CNTL__DELAY_FIRST_SBA_EN__SHIFT 0x0000001a
+#define AGP_CNTL__DELAY_FIRST_SBA_VAL__SHIFT 0x0000001b
+#define AGP_CNTL__AGP_MISC__SHIFT 0x0000001e
+
+/* DISP_MISC_CNTL */
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP_MASK 0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP 0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP_MASK 0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP 0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP_MASK 0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP 0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK_MASK 0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK 0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK_MASK 0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK 0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK_MASK 0x00000040L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK 0x00000040L
+#define DISP_MISC_CNTL__SYNC_STRENGTH_MASK 0x00000300L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN_MASK 0x00000400L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN 0x00000400L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP_MASK 0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP 0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK_MASK 0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK 0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS_MASK 0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS 0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS_MASK 0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS 0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS_MASK 0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS 0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV_MASK 0x00080000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV 0x00080000L
+#define DISP_MISC_CNTL__PALETTE2_MEM_RD_MARGIN_MASK 0x00f00000L
+#define DISP_MISC_CNTL__PALETTE_MEM_RD_MARGIN_MASK 0x0f000000L
+#define DISP_MISC_CNTL__RMX_BUF_MEM_RD_MARGIN_MASK 0xf0000000L
+
+/* DISP_PWR_MAN */
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN_MASK 0x00000001L
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN 0x00000001L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN_MASK 0x00000010L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN 0x00000010L
+#define DISP_PWR_MAN__DISP_PWR_MAN_DPMS_MASK 0x00000300L
+#define DISP_PWR_MAN__DISP_D3_RST_MASK 0x00010000L
+#define DISP_PWR_MAN__DISP_D3_RST 0x00010000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST_MASK 0x00020000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST 0x00020000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST_MASK 0x00040000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST 0x00040000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST_MASK 0x00080000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST 0x00080000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST_MASK 0x00100000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST 0x00100000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST_MASK 0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST 0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST_MASK 0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST 0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST_MASK 0x00800000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST 0x00800000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST_MASK 0x01000000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST 0x01000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST_MASK 0x02000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST 0x02000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN_MASK 0x04000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN 0x04000000L
+
+/* MC_IND_INDEX */
+#define MC_IND_INDEX__MC_IND_ADDR_MASK 0x0000001fL
+#define MC_IND_INDEX__MC_IND_WR_EN_MASK 0x00000100L
+#define MC_IND_INDEX__MC_IND_WR_EN 0x00000100L
+
+/* MC_IND_DATA */
+#define MC_IND_DATA__MC_IND_DATA_MASK 0xffffffffL
+
+/* MC_CHP_IO_CNTL_A1 */
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA__SHIFT 0x00000000
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA__SHIFT 0x00000001
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA__SHIFT 0x00000002
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA__SHIFT 0x00000003
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA__SHIFT 0x00000004
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA__SHIFT 0x00000005
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA__SHIFT 0x00000006
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA__SHIFT 0x00000007
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA__SHIFT 0x00000008
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA__SHIFT 0x00000009
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA__SHIFT 0x0000000a
+#define MC_CHP_IO_CNTL_A1__MEM_IO_MODEA__SHIFT 0x0000000c
+#define MC_CHP_IO_CNTL_A1__MEM_REC_CKA__SHIFT 0x0000000e
+#define MC_CHP_IO_CNTL_A1__MEM_REC_AA__SHIFT 0x00000010
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQMA__SHIFT 0x00000012
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQSA__SHIFT 0x00000014
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA__SHIFT 0x00000016
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA__SHIFT 0x00000017
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT 0x00000018
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_SELA__SHIFT 0x0000001a
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA__SHIFT 0x0000001c
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A__SHIFT 0x0000001e
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A__SHIFT 0x0000001f
+
+/* MC_CHP_IO_CNTL_B1 */
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB__SHIFT 0x00000000
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB__SHIFT 0x00000001
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB__SHIFT 0x00000002
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB__SHIFT 0x00000003
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB__SHIFT 0x00000004
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB__SHIFT 0x00000005
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB__SHIFT 0x00000006
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB__SHIFT 0x00000007
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB__SHIFT 0x00000008
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB__SHIFT 0x00000009
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB__SHIFT 0x0000000a
+#define MC_CHP_IO_CNTL_B1__MEM_IO_MODEB__SHIFT 0x0000000c
+#define MC_CHP_IO_CNTL_B1__MEM_REC_CKB__SHIFT 0x0000000e
+#define MC_CHP_IO_CNTL_B1__MEM_REC_AB__SHIFT 0x00000010
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQMB__SHIFT 0x00000012
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQSB__SHIFT 0x00000014
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB__SHIFT 0x00000016
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB__SHIFT 0x00000017
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT 0x00000018
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_SELB__SHIFT 0x0000001a
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB__SHIFT 0x0000001c
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B__SHIFT 0x0000001e
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B__SHIFT 0x0000001f
+
+/* MC_CHP_IO_CNTL_A1 */
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA_MASK 0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA 0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA_MASK 0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA 0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA_MASK 0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA 0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA_MASK 0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA 0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA_MASK 0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA 0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA_MASK 0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA 0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA_MASK 0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA 0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA_MASK 0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA 0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA_MASK 0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA 0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA_MASK 0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA 0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA_MASK 0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA 0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_IO_MODEA_MASK 0x00003000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_CKA_MASK 0x0000c000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_AA_MASK 0x00030000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQMA_MASK 0x000c0000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQSA_MASK 0x00300000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA_MASK 0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA 0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA_MASK 0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA 0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK 0x03000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_SELA_MASK 0x0c000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA_MASK 0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA 0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A_MASK 0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A 0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A_MASK 0x80000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A 0x80000000L
+
+/* MC_CHP_IO_CNTL_B1 */
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB_MASK 0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB 0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB_MASK 0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB 0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB_MASK 0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB 0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB_MASK 0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB 0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB_MASK 0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB 0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB_MASK 0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB 0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB_MASK 0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB 0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB_MASK 0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB 0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB_MASK 0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB 0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB_MASK 0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB 0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB_MASK 0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB 0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_IO_MODEB_MASK 0x00003000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_CKB_MASK 0x0000c000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_AB_MASK 0x00030000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQMB_MASK 0x000c0000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQSB_MASK 0x00300000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB_MASK 0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB 0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB_MASK 0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB 0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK 0x03000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_SELB_MASK 0x0c000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB_MASK 0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB 0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B_MASK 0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B 0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B_MASK 0x80000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B 0x80000000L
+
+/* MEM_SDRAM_MODE_REG */
+#define MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK 0x00007fffL
+#define MEM_SDRAM_MODE_REG__MEM_WR_LATENCY_MASK 0x000f0000L
+#define MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY_MASK 0x00700000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY_MASK 0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY 0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY_MASK 0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY 0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD_MASK 0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD 0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA_MASK 0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA 0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR_MASK 0x08000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR 0x08000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE_MASK 0x10000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE 0x10000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL_MASK 0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL 0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE_MASK 0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE 0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET_MASK 0x80000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET 0x80000000L
+
+/* MEM_SDRAM_MODE_REG */
+#define MEM_SDRAM_MODE_REG__MEM_MODE_REG__SHIFT 0x00000000
+#define MEM_SDRAM_MODE_REG__MEM_WR_LATENCY__SHIFT 0x00000010
+#define MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY__SHIFT 0x00000014
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY__SHIFT 0x00000017
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY__SHIFT 0x00000018
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD__SHIFT 0x00000019
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA__SHIFT 0x0000001a
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR__SHIFT 0x0000001b
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE__SHIFT 0x0000001c
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL__SHIFT 0x0000001d
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE__SHIFT 0x0000001e
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET__SHIFT 0x0000001f
+
+/* MEM_REFRESH_CNTL */
+#define MEM_REFRESH_CNTL__MEM_REFRESH_RATE_MASK 0x000000ffL
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS_MASK 0x00000100L
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS 0x00000100L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE_MASK 0x00000200L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE 0x00000200L
+#define MEM_REFRESH_CNTL__MEM_TRFC_MASK 0x0000f000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE_MASK 0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE 0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE_MASK 0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE 0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE_MASK 0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE 0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE_MASK 0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE 0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE_MASK 0x00100000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE 0x00100000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKA_MASK 0x00c00000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE_MASK 0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE 0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE_MASK 0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE 0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE_MASK 0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE 0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE_MASK 0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE 0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE_MASK 0x10000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE 0x10000000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKB_MASK 0xc0000000L
+
+/* MC_STATUS */
+#define MC_STATUS__MEM_PWRUP_COMPL_A_MASK 0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_A 0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_B_MASK 0x00000002L
+#define MC_STATUS__MEM_PWRUP_COMPL_B 0x00000002L
+#define MC_STATUS__MC_IDLE_MASK 0x00000004L
+#define MC_STATUS__MC_IDLE 0x00000004L
+#define MC_STATUS__IMP_N_VALUE_R_BACK_MASK 0x00000078L
+#define MC_STATUS__IMP_P_VALUE_R_BACK_MASK 0x00000780L
+#define MC_STATUS__TEST_OUT_R_BACK_MASK 0x00000800L
+#define MC_STATUS__TEST_OUT_R_BACK 0x00000800L
+#define MC_STATUS__DUMMY_OUT_R_BACK_MASK 0x00001000L
+#define MC_STATUS__DUMMY_OUT_R_BACK 0x00001000L
+#define MC_STATUS__IMP_N_VALUE_A_R_BACK_MASK 0x0001e000L
+#define MC_STATUS__IMP_P_VALUE_A_R_BACK_MASK 0x001e0000L
+#define MC_STATUS__IMP_N_VALUE_CK_R_BACK_MASK 0x01e00000L
+#define MC_STATUS__IMP_P_VALUE_CK_R_BACK_MASK 0x1e000000L
+
+/* MDLL_CKO */
+#define MDLL_CKO__MCKOA_SLEEP_MASK 0x00000001L
+#define MDLL_CKO__MCKOA_SLEEP 0x00000001L
+#define MDLL_CKO__MCKOA_RESET_MASK 0x00000002L
+#define MDLL_CKO__MCKOA_RESET 0x00000002L
+#define MDLL_CKO__MCKOA_RANGE_MASK 0x0000000cL
+#define MDLL_CKO__ERSTA_SOUTSEL_MASK 0x00000030L
+#define MDLL_CKO__MCKOA_FB_SEL_MASK 0x000000c0L
+#define MDLL_CKO__MCKOA_REF_SKEW_MASK 0x00000700L
+#define MDLL_CKO__MCKOA_FB_SKEW_MASK 0x00007000L
+#define MDLL_CKO__MCKOA_BP_SEL_MASK 0x00008000L
+#define MDLL_CKO__MCKOA_BP_SEL 0x00008000L
+#define MDLL_CKO__MCKOB_SLEEP_MASK 0x00010000L
+#define MDLL_CKO__MCKOB_SLEEP 0x00010000L
+#define MDLL_CKO__MCKOB_RESET_MASK 0x00020000L
+#define MDLL_CKO__MCKOB_RESET 0x00020000L
+#define MDLL_CKO__MCKOB_RANGE_MASK 0x000c0000L
+#define MDLL_CKO__ERSTB_SOUTSEL_MASK 0x00300000L
+#define MDLL_CKO__MCKOB_FB_SEL_MASK 0x00c00000L
+#define MDLL_CKO__MCKOB_REF_SKEW_MASK 0x07000000L
+#define MDLL_CKO__MCKOB_FB_SKEW_MASK 0x70000000L
+#define MDLL_CKO__MCKOB_BP_SEL_MASK 0x80000000L
+#define MDLL_CKO__MCKOB_BP_SEL 0x80000000L
+
+/* MDLL_RDCKA */
+#define MDLL_RDCKA__MRDCKA0_SLEEP_MASK 0x00000001L
+#define MDLL_RDCKA__MRDCKA0_SLEEP 0x00000001L
+#define MDLL_RDCKA__MRDCKA0_RESET_MASK 0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RESET 0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RANGE_MASK 0x0000000cL
+#define MDLL_RDCKA__MRDCKA0_REF_SEL_MASK 0x00000030L
+#define MDLL_RDCKA__MRDCKA0_FB_SEL_MASK 0x000000c0L
+#define MDLL_RDCKA__MRDCKA0_REF_SKEW_MASK 0x00000700L
+#define MDLL_RDCKA__MRDCKA0_SINSEL_MASK 0x00000800L
+#define MDLL_RDCKA__MRDCKA0_SINSEL 0x00000800L
+#define MDLL_RDCKA__MRDCKA0_FB_SKEW_MASK 0x00007000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL_MASK 0x00008000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL 0x00008000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP_MASK 0x00010000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP 0x00010000L
+#define MDLL_RDCKA__MRDCKA1_RESET_MASK 0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RESET 0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RANGE_MASK 0x000c0000L
+#define MDLL_RDCKA__MRDCKA1_REF_SEL_MASK 0x00300000L
+#define MDLL_RDCKA__MRDCKA1_FB_SEL_MASK 0x00c00000L
+#define MDLL_RDCKA__MRDCKA1_REF_SKEW_MASK 0x07000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL_MASK 0x08000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL 0x08000000L
+#define MDLL_RDCKA__MRDCKA1_FB_SKEW_MASK 0x70000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL_MASK 0x80000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL 0x80000000L
+
+/* MDLL_RDCKB */
+#define MDLL_RDCKB__MRDCKB0_SLEEP_MASK 0x00000001L
+#define MDLL_RDCKB__MRDCKB0_SLEEP 0x00000001L
+#define MDLL_RDCKB__MRDCKB0_RESET_MASK 0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RESET 0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RANGE_MASK 0x0000000cL
+#define MDLL_RDCKB__MRDCKB0_REF_SEL_MASK 0x00000030L
+#define MDLL_RDCKB__MRDCKB0_FB_SEL_MASK 0x000000c0L
+#define MDLL_RDCKB__MRDCKB0_REF_SKEW_MASK 0x00000700L
+#define MDLL_RDCKB__MRDCKB0_SINSEL_MASK 0x00000800L
+#define MDLL_RDCKB__MRDCKB0_SINSEL 0x00000800L
+#define MDLL_RDCKB__MRDCKB0_FB_SKEW_MASK 0x00007000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL_MASK 0x00008000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL 0x00008000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP_MASK 0x00010000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP 0x00010000L
+#define MDLL_RDCKB__MRDCKB1_RESET_MASK 0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RESET 0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RANGE_MASK 0x000c0000L
+#define MDLL_RDCKB__MRDCKB1_REF_SEL_MASK 0x00300000L
+#define MDLL_RDCKB__MRDCKB1_FB_SEL_MASK 0x00c00000L
+#define MDLL_RDCKB__MRDCKB1_REF_SKEW_MASK 0x07000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL_MASK 0x08000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL 0x08000000L
+#define MDLL_RDCKB__MRDCKB1_FB_SKEW_MASK 0x70000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL_MASK 0x80000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL 0x80000000L
+
+#define MDLL_R300_RDCK__MRDCKA_SLEEP 0x00000001L
+#define MDLL_R300_RDCK__MRDCKA_RESET 0x00000002L
+#define MDLL_R300_RDCK__MRDCKB_SLEEP 0x00000004L
+#define MDLL_R300_RDCK__MRDCKB_RESET 0x00000008L
+#define MDLL_R300_RDCK__MRDCKC_SLEEP 0x00000010L
+#define MDLL_R300_RDCK__MRDCKC_RESET 0x00000020L
+#define MDLL_R300_RDCK__MRDCKD_SLEEP 0x00000040L
+#define MDLL_R300_RDCK__MRDCKD_RESET 0x00000080L
+
+#define pllCLK_PIN_CNTL 0x0001
+#define pllPPLL_CNTL 0x0002
+#define pllPPLL_REF_DIV 0x0003
+#define pllPPLL_DIV_0 0x0004
+#define pllPPLL_DIV_1 0x0005
+#define pllPPLL_DIV_2 0x0006
+#define pllPPLL_DIV_3 0x0007
+#define pllVCLK_ECP_CNTL 0x0008
+#define pllHTOTAL_CNTL 0x0009
+#define pllM_SPLL_REF_FB_DIV 0x000A
+#define pllAGP_PLL_CNTL 0x000B
+#define pllSPLL_CNTL 0x000C
+#define pllSCLK_CNTL 0x000D
+#define pllMPLL_CNTL 0x000E
+#define pllMDLL_CKO 0x000F
+#define pllMDLL_RDCKA 0x0010
+#define pllMDLL_RDCKB 0x0011
+#define pllMCLK_CNTL 0x0012
+#define pllPLL_TEST_CNTL 0x0013
+#define pllCLK_PWRMGT_CNTL 0x0014
+#define pllPLL_PWRMGT_CNTL 0x0015
+#define pllCG_TEST_MACRO_RW_WRITE 0x0016
+#define pllCG_TEST_MACRO_RW_READ 0x0017
+#define pllCG_TEST_MACRO_RW_DATA 0x0018
+#define pllCG_TEST_MACRO_RW_CNTL 0x0019
+#define pllDISP_TEST_MACRO_RW_WRITE 0x001A
+#define pllDISP_TEST_MACRO_RW_READ 0x001B
+#define pllDISP_TEST_MACRO_RW_DATA 0x001C
+#define pllDISP_TEST_MACRO_RW_CNTL 0x001D
+#define pllSCLK_CNTL2 0x001E
+#define pllMCLK_MISC 0x001F
+#define pllTV_PLL_FINE_CNTL 0x0020
+#define pllTV_PLL_CNTL 0x0021
+#define pllTV_PLL_CNTL1 0x0022
+#define pllTV_DTO_INCREMENTS 0x0023
+#define pllSPLL_AUX_CNTL 0x0024
+#define pllMPLL_AUX_CNTL 0x0025
+#define pllP2PLL_CNTL 0x002A
+#define pllP2PLL_REF_DIV 0x002B
+#define pllP2PLL_DIV_0 0x002C
+#define pllPIXCLKS_CNTL 0x002D
+#define pllHTOTAL2_CNTL 0x002E
+#define pllSSPLL_CNTL 0x0030
+#define pllSSPLL_REF_DIV 0x0031
+#define pllSSPLL_DIV_0 0x0032
+#define pllSS_INT_CNTL 0x0033
+#define pllSS_TST_CNTL 0x0034
+#define pllSCLK_MORE_CNTL 0x0035
+
+#define ixMC_PERF_CNTL 0x0000
+#define ixMC_PERF_SEL 0x0001
+#define ixMC_PERF_REGION_0 0x0002
+#define ixMC_PERF_REGION_1 0x0003
+#define ixMC_PERF_COUNT_0 0x0004
+#define ixMC_PERF_COUNT_1 0x0005
+#define ixMC_PERF_COUNT_2 0x0006
+#define ixMC_PERF_COUNT_3 0x0007
+#define ixMC_PERF_COUNT_MEMCH_A 0x0008
+#define ixMC_PERF_COUNT_MEMCH_B 0x0009
+#define ixMC_IMP_CNTL 0x000A
+#define ixMC_CHP_IO_CNTL_A0 0x000B
+#define ixMC_CHP_IO_CNTL_A1 0x000C
+#define ixMC_CHP_IO_CNTL_B0 0x000D
+#define ixMC_CHP_IO_CNTL_B1 0x000E
+#define ixMC_IMP_CNTL_0 0x000F
+#define ixTC_MISMATCH_1 0x0010
+#define ixTC_MISMATCH_2 0x0011
+#define ixMC_BIST_CTRL 0x0012
+#define ixREG_COLLAR_WRITE 0x0013
+#define ixREG_COLLAR_READ 0x0014
+#define ixR300_MC_IMP_CNTL 0x0018
+#define ixR300_MC_CHP_IO_CNTL_A0 0x0019
+#define ixR300_MC_CHP_IO_CNTL_A1 0x001a
+#define ixR300_MC_CHP_IO_CNTL_B0 0x001b
+#define ixR300_MC_CHP_IO_CNTL_B1 0x001c
+#define ixR300_MC_CHP_IO_CNTL_C0 0x001d
+#define ixR300_MC_CHP_IO_CNTL_C1 0x001e
+#define ixR300_MC_CHP_IO_CNTL_D0 0x001f
+#define ixR300_MC_CHP_IO_CNTL_D1 0x0020
+#define ixR300_MC_IMP_CNTL_0 0x0021
+#define ixR300_MC_ELPIDA_CNTL 0x0022
+#define ixR300_MC_CHP_IO_OE_CNTL_CD 0x0023
+#define ixR300_MC_READ_CNTL_CD 0x0024
+#define ixR300_MC_MC_INIT_WR_LAT_TIMER 0x0025
+#define ixR300_MC_DEBUG_CNTL 0x0026
+#define ixR300_MC_BIST_CNTL_0 0x0028
+#define ixR300_MC_BIST_CNTL_1 0x0029
+#define ixR300_MC_BIST_CNTL_2 0x002a
+#define ixR300_MC_BIST_CNTL_3 0x002b
+#define ixR300_MC_BIST_CNTL_4 0x002c
+#define ixR300_MC_BIST_CNTL_5 0x002d
+#define ixR300_MC_IMP_STATUS 0x002e
+#define ixR300_MC_DLL_CNTL 0x002f
+#define NB_TOM 0x15C
+
+#endif /* _RADEON_H */
diff --git a/include/sha1.h b/include/sha1.h
new file mode 100644
index 0000000..15ea13c
--- /dev/null
+++ b/include/sha1.h
@@ -0,0 +1,115 @@
+/**
+ * \file sha1.h
+ * based from http://xyssl.org/code/source/sha1/
+ * FIPS-180-1 compliant SHA-1 implementation
+ *
+ * Copyright (C) 2003-2006 Christophe Devine
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License, version 2.1 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+/*
+ * The SHA-1 standard was published by NIST in 1993.
+ *
+ * http://www.itl.nist.gov/fipspubs/fip180-1.htm
+ */
+#ifndef _SHA1_H
+#define _SHA1_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define SHA1_SUM_POS -0x20
+#define SHA1_SUM_LEN 20
+
+/**
+ * \brief SHA-1 context structure
+ */
+typedef struct
+{
+ unsigned long total[2]; /*!< number of bytes processed */
+ unsigned long state[5]; /*!< intermediate digest state */
+ unsigned char buffer[64]; /*!< data block being processed */
+}
+sha1_context;
+
+/**
+ * \brief SHA-1 context setup
+ *
+ * \param ctx SHA-1 context to be initialized
+ */
+void sha1_starts( sha1_context *ctx );
+
+/**
+ * \brief SHA-1 process buffer
+ *
+ * \param ctx SHA-1 context
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ */
+void sha1_update( sha1_context *ctx, unsigned char *input, int ilen );
+
+/**
+ * \brief SHA-1 final digest
+ *
+ * \param ctx SHA-1 context
+ * \param output SHA-1 checksum result
+ */
+void sha1_finish( sha1_context *ctx, unsigned char output[20] );
+
+/**
+ * \brief Output = SHA-1( input buffer )
+ *
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ * \param output SHA-1 checksum result
+ */
+void sha1_csum( unsigned char *input, int ilen,
+ unsigned char output[20] );
+
+/**
+ * \brief Output = SHA-1( file contents )
+ *
+ * \param path input file name
+ * \param output SHA-1 checksum result
+ * \return 0 if successful, or 1 if fopen failed
+ */
+int sha1_file( char *path, unsigned char output[20] );
+
+/**
+ * \brief Output = HMAC-SHA-1( input buffer, hmac key )
+ *
+ * \param key HMAC secret key
+ * \param keylen length of the HMAC key
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ * \param output HMAC-SHA-1 result
+ */
+void sha1_hmac( unsigned char *key, int keylen,
+ unsigned char *input, int ilen,
+ unsigned char output[20] );
+
+/**
+ * \brief Checkup routine
+ *
+ * \return 0 if successful, or 1 if the test failed
+ */
+int sha1_self_test( void );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* sha1.h */
diff --git a/include/spartan3.h b/include/spartan3.h
index b14db03..65a3f5a 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -73,6 +73,13 @@ typedef struct {
#define XILINX_XC3S4000_SIZE 11316864/8
#define XILINX_XC3S5000_SIZE 13271936/8
+/* Spartan-3E (v3.4) */
+#define XILINX_XC3S100E_SIZE 581344/8
+#define XILINX_XC3S250E_SIZE 1353728/8
+#define XILINX_XC3S500E_SIZE 2270208/8
+#define XILINX_XC3S1200E_SIZE 3841184/8
+#define XILINX_XC3S1600E_SIZE 5969696/8
+
/* Descriptor Macros
*********************************************************************/
/* Spartan-II devices */
@@ -100,4 +107,21 @@ typedef struct {
#define XILINX_XC3S5000_DESC(iface, fn_table, cookie) \
{ Xilinx_Spartan3, iface, XILINX_XC3S5000E_SIZE, fn_table, cookie }
+
+/* Spartan-3E devices */
+#define XILINX_XC3S100E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie }
+
+#define XILINX_XC3S250E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie }
+
+#define XILINX_XC3S500E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie }
+
+#define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie }
+
+#define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie }
+
#endif /* _SPARTAN3_H_ */
diff --git a/include/status_led.h b/include/status_led.h
index 71a202f..a646814 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -367,6 +367,13 @@ void status_led_set (int led, int state);
#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+extern void __led_toggle (led_id_t mask);
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
#else
# error Status LED configuration missing
#endif
diff --git a/include/usb.h b/include/usb.h
index bf71554..4e1539f 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,10 @@ struct usb_device {
* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
+ defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
+ defined(CONFIG_USB_ISP116X_HCD)
+
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
@@ -177,6 +180,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len,struct devrequest *setup);
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
+void usb_event_poll(void);
/* Defines */
#define USB_UHCI_VEND_ID 0x8086
@@ -230,16 +234,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
/* big endian -> little endian conversion */
/* some CPUs are already little endian e.g. the ARM920T */
-#ifdef LITTLEENDIAN
-#define swap_16(x) ((unsigned short)(x))
-#define swap_32(x) ((unsigned long)(x))
-#else
-#define swap_16(x) \
+#define __swap_16(x) \
({ unsigned short x_ = (unsigned short)x; \
(unsigned short)( \
((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \
})
-#define swap_32(x) \
+#define __swap_32(x) \
({ unsigned long x_ = (unsigned long)x; \
(unsigned long)( \
((x_ & 0x000000FFUL) << 24) | \
@@ -247,6 +247,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
((x_ & 0x00FF0000UL) >> 8) | \
((x_ & 0xFF000000UL) >> 24) ); \
})
+
+#ifdef LITTLEENDIAN
+# define swap_16(x) (x)
+# define swap_32(x) (x)
+#else
+# define swap_16(x) __swap_16(x)
+# define swap_32(x) __swap_32(x)
#endif /* LITTLEENDIAN */
/*
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
new file mode 100644
index 0000000..87bf50c
--- /dev/null
+++ b/include/usb_cdc_acm.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* ACM Control Requests */
+#define ACM_SEND_ENCAPSULATED_COMMAND 0x00
+#define ACM_GET_ENCAPSULATED_RESPONSE 0x01
+#define ACM_SET_COMM_FEATURE 0x02
+#define ACM_GET_COMM_FEATRUE 0x03
+#define ACM_CLEAR_COMM_FEATURE 0x04
+#define ACM_SET_LINE_ENCODING 0x20
+#define ACM_GET_LINE_ENCODING 0x21
+#define ACM_SET_CONTROL_LINE_STATE 0x22
+#define ACM_SEND_BREAK 0x23
+
+/* ACM Notification Codes */
+#define ACM_NETWORK_CONNECTION 0x00
+#define ACM_RESPONSE_AVAILABLE 0x01
+#define ACM_SERIAL_STATE 0x20
+
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */
+struct rs232_emu{
+ unsigned long dter;
+ unsigned char stop_bits;
+ unsigned char parity;
+ unsigned char data_bits;
+}__attribute__((packed));
diff --git a/include/usbdcore.h b/include/usbdcore.h
index 6e92df1..cb2be72 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -576,6 +576,9 @@ struct usb_device_instance {
void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
+ /* Do cdc device specific control requests */
+ int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
+
/* bus interface */
struct usb_bus_instance *bus; /* which bus interface driver */
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
new file mode 100644
index 0000000..9df62f4
--- /dev/null
+++ b/include/usbdcore_mpc8xx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit
+ * bodonoghue@codehermit.ie
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <commproc.h>
+
+/* Mode Register */
+#define USMOD_EN 0x01
+#define USMOD_HOST 0x02
+#define USMOD_TEST 0x04
+#define USMOD_SFTE 0x08
+#define USMOD_RESUME 0x40
+#define USMOD_LSS 0x80
+
+/* Endpoint Registers */
+#define USEP_RHS_NORM 0x00
+#define USEP_RHS_IGNORE 0x01
+#define USEP_RHS_NAK 0x02
+#define USEP_RHS_STALL 0x03
+
+#define USEP_THS_NORM 0x00
+#define USEP_THS_IGNORE 0x04
+#define USEP_THS_NAK 0x08
+#define USEP_THS_STALL 0x0C
+
+#define USEP_RTE 0x10
+#define USEP_MF 0x20
+
+#define USEP_TM_CONTROL 0x00
+#define USEP_TM_INT 0x100
+#define USEP_TM_BULK 0x200
+#define USEP_TM_ISO 0x300
+
+/* Command Register */
+#define USCOM_EP0 0x00
+#define USCOM_EP1 0x01
+#define USCOM_EP2 0x02
+#define USCOM_EP3 0x03
+
+#define USCOM_FLUSH 0x40
+#define USCOM_STR 0x80
+
+/* Event Register */
+#define USB_E_RXB 0x0001
+#define USB_E_TXB 0x0002
+#define USB_E_BSY 0x0004
+#define USB_E_SOF 0x0008
+#define USB_E_TXE1 0x0010
+#define USB_E_TXE2 0x0020
+#define USB_E_TXE3 0x0040
+#define USB_E_TXE4 0x0080
+#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4)
+#define USB_E_IDLE 0x0100
+#define USB_E_RESET 0x0200
+
+/* Mask Register */
+#define USBS_IDLE 0x01
+
+/* RX Buffer Descriptor */
+#define RX_BD_OV 0x02
+#define RX_BD_CR 0x04
+#define RX_BD_AB 0x08
+#define RX_BD_NO 0x10
+#define RX_BD_PID_DATA0 0x00
+#define RX_BD_PID_DATA1 0x40
+#define RX_BD_PID_SETUP 0x80
+#define RX_BD_F 0x400
+#define RX_BD_L 0x800
+#define RX_BD_I 0x1000
+#define RX_BD_W 0x2000
+#define RX_BD_E 0x8000
+
+/* Useful masks */
+#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP)
+#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL)
+#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK)
+#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF)
+
+/* TX Buffer Descriptor */
+#define TX_BD_UN 0x02
+#define TX_BD_TO 0x04
+#define TX_BD_NO_PID 0x00
+#define TX_BD_PID_DATA0 0x80
+#define TX_BD_PID_DATA1 0xC0
+#define TX_BD_CNF 0x200
+#define TX_BD_TC 0x400
+#define TX_BD_L 0x800
+#define TX_BD_I 0x1000
+#define TX_BD_W 0x2000
+#define TX_BD_R 0x8000
+
+/* Implementation specific defines */
+
+#define EP_MIN_PACKET_SIZE 0x08
+#define MAX_ENDPOINTS 0x04
+#define FIFO_SIZE 0x10
+#define EP_MAX_PKT FIFO_SIZE
+#define TX_RING_SIZE 0x04
+#define RX_RING_SIZE 0x06
+#define USB_MAX_PKT 0x40
+#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80
+#define TOGGLE_RX_PID(x) x^= 0x40
+#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */
+#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */
+
+#define PROFF_USB 0x00000000
+#define CPM_USB_BASE 0x00000A00
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE EP_MAX_PKT
+#define UDC_OUT_ENDPOINT 0x02
+#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_IN_ENDPOINT 0x03
+#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_INT_ENDPOINT 0x01
+#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE
+
+struct mpc8xx_ep {
+ struct urb * urb;
+ unsigned char pid;
+ unsigned char sc;
+ volatile cbd_t * prx;
+};
+
+typedef struct mpc8xx_usb{
+ char usmod; /* Mode Register */
+ char usaddr; /* Slave Address Register */
+ char uscom; /* Command Register */
+ char res1; /* Reserved */
+ ushort usep[4];
+ ulong res2; /* Reserved */
+ ushort usber; /* Event Register */
+ ushort res3; /* Reserved */
+ ushort usbmr; /* Mask Register */
+ char res4; /* Reserved */
+ char usbs; /* Status Register */
+ char res5[8]; /* Reserved */
+}usb_t;
+
+typedef struct mpc8xx_parameter_ram{
+ ushort ep0ptr; /* Endpoint Pointer Register 0 */
+ ushort ep1ptr; /* Endpoint Pointer Register 1 */
+ ushort ep2ptr; /* Endpoint Pointer Register 2 */
+ ushort ep3ptr; /* Endpoint Pointer Register 3 */
+ uint rstate; /* Receive state */
+ uint rptr; /* Receive internal data pointer */
+ ushort frame_n; /* Frame number */
+ ushort rbcnt; /* Receive byte count */
+ uint rtemp; /* Receive temp cp use only */
+ uint rxusb; /* Rx Data Temp */
+ ushort rxuptr; /* Rx microcode return address temp */
+}usb_pram_t;
+
+typedef struct endpoint_parameter_block_pointer{
+ ushort rbase; /* RxBD base address */
+ ushort tbase; /* TxBD base address */
+ char rfcr; /* Rx Function code */
+ char tfcr; /* Tx Function code */
+ ushort mrblr; /* Maximum Receive Buffer Length */
+ ushort rbptr; /* RxBD pointer Next Buffer Descriptor */
+ ushort tbptr; /* TxBD pointer Next Buffer Descriptor */
+ ulong tstate; /* Transmit internal state */
+ ulong tptr; /* Transmit internal data pointer */
+ ushort tcrc; /* Transmit temp CRC */
+ ushort tbcnt; /* Transmit internal bye count */
+ ulong ttemp; /* Tx temp */
+ ushort txuptr; /* Tx microcode return address */
+ ushort res1; /* Reserved */
+}usb_epb_t;
+
+typedef enum mpc8xx_udc_state{
+ STATE_NOT_READY,
+ STATE_ERROR,
+ STATE_READY,
+}mpc8xx_udc_state_t;
+
+/* Declarations */
+int udc_init(void);
+void udc_irq(void);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 6ea3331..526fcd9 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -161,10 +161,20 @@
#define UDC_VBUS_CTRL (1 << 19)
#define UDC_VBUS_MODE (1 << 18)
-
-void omap1510_udc_irq(void);
-void omap1510_udc_noniso_irq(void);
-
+/* OMAP Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT 1
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_INT_ENDPOINT 5
+#define UDC_INT_PKTSIZE 16
+#define UDC_BULK_PKTSIZE 16
+
+void udc_irq (void);
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
/* Higher level functions for abstracting away from specific device */
void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2d9f739..a752097 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -92,33 +92,42 @@
#define COMMUNICATIONS_DEVICE_CLASS 0x02
/* c.f. CDC 4.2 Table 15 */
-#define COMMUNICATIONS_INTERFACE_CLASS 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A
+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF
/* c.f. CDC 4.3 Table 16 */
-#define COMMUNICATIONS_NO_SUBCLASS 0x00
+#define COMMUNICATIONS_NO_SUBCLASS 0x00
#define COMMUNICATIONS_DLCM_SUBCLASS 0x01
-#define COMMUNICATIONS_ACM_SUBCLASS 0x02
-#define COMMUNICATIONS_TCM_SUBCLASS 0x03
+#define COMMUNICATIONS_ACM_SUBCLASS 0x02
+#define COMMUNICATIONS_TCM_SUBCLASS 0x03
#define COMMUNICATIONS_MCCM_SUBCLASS 0x04
-#define COMMUNICATIONS_CCM_SUBCLASS 0x05
+#define COMMUNICATIONS_CCM_SUBCLASS 0x05
#define COMMUNICATIONS_ENCM_SUBCLASS 0x06
#define COMMUNICATIONS_ANCM_SUBCLASS 0x07
/* c.f. WMCD 5.1 */
#define COMMUNICATIONS_WHCM_SUBCLASS 0x08
-#define COMMUNICATIONS_DMM_SUBCLASS 0x09
+#define COMMUNICATIONS_DMM_SUBCLASS 0x09
#define COMMUNICATIONS_MDLM_SUBCLASS 0x0a
#define COMMUNICATIONS_OBEX_SUBCLASS 0x0b
-/* c.f. CDC 4.6 Table 18 */
+/* c.f. CDC 4.4 Table 17 */
+#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/
+
+/* c.f. CDC 4.5 Table 18 */
#define DATA_INTERFACE_CLASS 0x0a
+/* c.f. CDC 4.6 No Table */
+#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */
+
/* c.f. CDC 4.7 Table 19 */
-#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */
/* c.f. CDC 5.2.3 Table 24 */
-#define CS_INTERFACE 0x24
+#define CS_INTERFACE 0x24
#define CS_ENDPOINT 0x25
/*
@@ -128,7 +137,7 @@
* c.f. WMCD 5.3 Table 5.3
*/
-#define USB_ST_HEADER 0x00
+#define USB_ST_HEADER 0x00
#define USB_ST_CMF 0x01
#define USB_ST_ACMF 0x02
#define USB_ST_DLMF 0x03
@@ -137,18 +146,18 @@
#define USB_ST_UF 0x06
#define USB_ST_CSF 0x07
#define USB_ST_TOMF 0x08
-#define USB_ST_USBTF 0x09
+#define USB_ST_USBTF 0x09
#define USB_ST_NCT 0x0a
#define USB_ST_PUF 0x0b
#define USB_ST_EUF 0x0c
#define USB_ST_MCMF 0x0d
#define USB_ST_CCMF 0x0e
#define USB_ST_ENF 0x0f
-#define USB_ST_ATMNF 0x10
+#define USB_ST_ATMNF 0x10
#define USB_ST_WHCM 0x11
#define USB_ST_MDLM 0x12
-#define USB_ST_MDLMD 0x13
+#define USB_ST_MDLMD 0x13
#define USB_ST_DMM 0x14
#define USB_ST_OBEX 0x15
#define USB_ST_CS 0x16
@@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor {
u8 bDescriptorType;
u8 bDescriptorSubtype; /* 0x06 */
u8 bMasterInterface;
- u8 bSlaveInterface0[0];
+ /* u8 bSlaveInterface0[0]; */
+ u8 bSlaveInterface0;
} __attribute__ ((packed));
struct usb_class_country_selection_descriptor {