diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/IceCube.h | 44 | ||||
| -rw-r--r-- | include/configs/eXalion.h | 6 | ||||
| -rw-r--r-- | include/mpc5xxx.h | 23 |
3 files changed, 68 insertions, 5 deletions
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 1dc9925..1d4daa7 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -81,6 +81,10 @@ #endif +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + /* USB */ #if 1 #define CONFIG_USB_OHCI @@ -94,8 +98,12 @@ /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ - CFG_CMD_I2C | CFG_CMD_EEPROM | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + ADD_PCI_CMD | \ ADD_USB_CMD) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -293,4 +301,36 @@ #define CFG_RESET_ADDRESS 0xff000000 +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005c) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + #endif /* __CONFIG_H */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 5ebc7a9..a014c7c 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -50,13 +50,13 @@ #error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif /* older kernels need clock in MHz newer in Hz */ - /* #define CONFIG_CLOCKS_IN_MHZ 1 *//* clocks passsed to Linux in MHz */ + /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz */ #undef CONFIG_CLOCKS_IN_MHZ #define CONFIG_BOOTDELAY 10 - /*#define CONFIG_DRAM_SPEED 66 *//* MHz */ + /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_FLASH | \ @@ -230,7 +230,7 @@ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ - /*#define CONFIG_133MHZ_DRAM 1 *//* For 133 MHZ DRAM only !!!!!!!!!!! */ + /*#define CONFIG_133MHZ_DRAM 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!! */ #if defined (CONFIG_MPC8245) /* Bit-field values for PMCR2. */ diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 8d4013a..fb0e41a 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -89,6 +89,7 @@ #define MPC5XXX_ICTL (CFG_MBAR + 0x0500) #define MPC5XXX_GPT (CFG_MBAR + 0x0600) #define MPC5XXX_GPIO (CFG_MBAR + 0x0b00) +#define MPC5XXX_WU_GPIO (CFG_MBAR + 0x0c00) #define MPC5XXX_PCI (CFG_MBAR + 0x0d00) #define MPC5XXX_USB (CFG_MBAR + 0x1000) #define MPC5XXX_SDMA (CFG_MBAR + 0x1200) @@ -108,6 +109,7 @@ #endif #define MPC5XXX_FEC (CFG_MBAR + 0x3000) +#define MPC5XXX_ATA (CFG_MBAR + 0x3A00) #define MPC5XXX_I2C1 (CFG_MBAR + 0x3D00) #define MPC5XXX_I2C2 (CFG_MBAR + 0x3D40) @@ -163,6 +165,12 @@ /* GPIO registers */ #define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000) +/* WakeUp GPIO registers */ +#define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000) +#define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004) +#define MPC5XXX_WU_GPIO_DIR (MPC5XXX_WU_GPIO + 0x0008) +#define MPC5XXX_WU_GPIO_DATA (MPC5XXX_WU_GPIO + 0x000c) + /* PCI registers */ #define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) #define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c) @@ -209,6 +217,12 @@ #define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) #define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) +/* ATA registers */ +#define MPC5XXX_ATA_HOST_CONFIG (MPC5XXX_ATA + 0x0000) +#define MPC5XXX_ATA_PIO1 (MPC5XXX_ATA + 0x0008) +#define MPC5XXX_ATA_PIO2 (MPC5XXX_ATA + 0x000C) +#define MPC5XXX_ATA_SHARE_COUNT (MPC5XXX_ATA + 0x002C) + /* I2Cn control register bits */ #define I2C_EN 0x80 #define I2C_IEN 0x40 @@ -287,6 +301,15 @@ #define PSC_MODE_ONE_STOP 0x07 #define PSC_MODE_TWO_STOP 0x0f +/* ATA config fields */ +#define MPC5xxx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine + reset */ +#define MPC5xxx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */ +#define MPC5xxx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt + in PIO */ +#define MPC5xxx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports + IORDY protocol */ + #ifndef __ASSEMBLY__ struct mpc5xxx_psc { volatile u8 mode; /* PSC + 0x00 */ |