diff options
Diffstat (limited to 'include/phy.h')
-rw-r--r-- | include/phy.h | 112 |
1 files changed, 101 insertions, 11 deletions
diff --git a/include/phy.h b/include/phy.h index b5de14c..fedd146 100644 --- a/include/phy.h +++ b/include/phy.h @@ -170,6 +170,13 @@ struct fixed_link { int asym_pause; }; +/** + * phy_read - Convenience function for reading a given PHY register + * @phydev: the phy_device struct + * @devad: The MMD to read from + * @regnum: register number to read + * @return: value for success or negative errno for failure + */ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) { struct mii_dev *bus = phydev->bus; @@ -182,6 +189,14 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) return bus->read(bus, phydev->addr, devad, regnum); } +/** + * phy_write - Convenience function for writing a given PHY register + * @phydev: the phy_device struct + * @devad: The MMD to read from + * @regnum: register number to write + * @val: value to write to @regnum + * @return: 0 for success or negative errno for failure + */ static inline int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val) { @@ -195,6 +210,13 @@ static inline int phy_write(struct phy_device *phydev, int devad, int regnum, return bus->write(bus, phydev->addr, devad, regnum, val); } +/** + * phy_mmd_start_indirect - Convenience function for writing MMD registers + * @phydev: the phy_device struct + * @devad: The MMD to read from + * @regnum: register number to write + * @return: None + */ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum) { @@ -209,6 +231,14 @@ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad, (devad | MII_MMD_CTRL_NOINCR)); } +/** + * phy_read_mmd - Convenience function for reading a register + * from an MMD on a given PHY. + * @phydev: The phy_device struct + * @devad: The MMD to read from + * @regnum: The register on the MMD to read + * @return: Value for success or negative errno for failure + */ static inline int phy_read_mmd(struct phy_device *phydev, int devad, int regnum) { @@ -233,6 +263,15 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA); } +/** + * phy_write_mmd - Convenience function for writing a register + * on an MMD on a given PHY. + * @phydev: The phy_device struct + * @devad: The MMD to read from + * @regnum: The register on the MMD to read + * @val: value to write to @regnum + * @return: 0 for success or negative errno for failure + */ static inline int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val) { @@ -257,6 +296,60 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad, return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val); } +/** + * phy_set_bits_mmd - Convenience function for setting bits in a register + * on MMD + * @phydev: the phy_device struct + * @devad: the MMD containing register to modify + * @regnum: register number to modify + * @val: bits to set + * @return: 0 for success or negative errno for failure + */ +static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, + u32 regnum, u16 val) +{ + int value, ret; + + value = phy_read_mmd(phydev, devad, regnum); + if (value < 0) + return value; + + value |= val; + + ret = phy_write_mmd(phydev, devad, regnum, value); + if (ret < 0) + return ret; + + return 0; +} + +/** + * phy_clear_bits_mmd - Convenience function for clearing bits in a register + * on MMD + * @phydev: the phy_device struct + * @devad: the MMD containing register to modify + * @regnum: register number to modify + * @val: bits to clear + * @return: 0 for success or negative errno for failure + */ +static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, + u32 regnum, u16 val) +{ + int value, ret; + + value = phy_read_mmd(phydev, devad, regnum); + if (value < 0) + return value; + + value &= ~val; + + ret = phy_write_mmd(phydev, devad, regnum, value); + if (ret < 0) + return ret; + + return 0; +} + #ifdef CONFIG_PHYLIB_10G extern struct phy_driver gen10g_driver; @@ -275,26 +368,23 @@ static inline int is_10g_interface(phy_interface_t interface) /** * phy_init() - Initializes the PHY drivers - * * This function registers all available PHY drivers * - * @return 0 if OK, -ve on error + * @return: 0 if OK, -ve on error */ int phy_init(void); /** * phy_reset() - Resets the specified PHY - * * Issues a reset of the PHY and waits for it to complete * * @phydev: PHY to reset - * @return 0 if OK, -ve on error + * @return: 0 if OK, -ve on error */ int phy_reset(struct phy_device *phydev); /** * phy_find_by_mask() - Searches for a PHY on the specified MDIO bus - * * The function checks the PHY addresses flagged in phy_mask and returns a * phy_device pointer if it detects a PHY. * This function should only be called if just one PHY is expected to be present @@ -304,7 +394,7 @@ int phy_reset(struct phy_device *phydev); * @bus: MII/MDIO bus to scan * @phy_mask: bitmap of PYH addresses to scan * @interface: type of MAC-PHY interface - * @return pointer to phy_device if a PHY is found, or NULL otherwise + * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask, phy_interface_t interface); @@ -320,7 +410,6 @@ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev); /** * phy_connect() - Creates a PHY device for the Ethernet interface - * * Creates a PHY device for the PHY at the given address, if one doesn't exist * already, and associates it with the Ethernet device. * The function may be called with addr <= 0, in this case addr value is ignored @@ -332,7 +421,7 @@ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev); * @addr: PHY address on MDIO bus * @dev: Ethernet device to associate to the PHY * @interface: type of MAC-PHY interface - * @return pointer to phy_device if a PHY is found, or NULL otherwise + * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_connect(struct mii_dev *bus, int addr, struct udevice *dev, @@ -356,7 +445,6 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev); /** * phy_connect() - Creates a PHY device for the Ethernet interface - * * Creates a PHY device for the PHY at the given address, if one doesn't exist * already, and associates it with the Ethernet device. * The function may be called with addr <= 0, in this case addr value is ignored @@ -368,7 +456,7 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev); * @addr: PHY address on MDIO bus * @dev: Ethernet device to associate to the PHY * @interface: type of MAC-PHY interface - * @return pointer to phy_device if a PHY is found, or NULL otherwise + * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_connect(struct mii_dev *bus, int addr, struct eth_device *dev, @@ -428,7 +516,7 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id); * phy_get_interface_by_name() - Look up a PHY interface name * * @str: PHY interface name, e.g. "mii" - * @return PHY_INTERFACE_MODE_... value, or -1 if not found + * @return: PHY_INTERFACE_MODE_... value, or -1 if not found */ int phy_get_interface_by_name(const char *str); @@ -436,6 +524,7 @@ int phy_get_interface_by_name(const char *str); * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct + * @return: true if MII bus is RGMII or false if it is not */ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) { @@ -447,6 +536,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) * phy_interface_is_sgmii - Convenience function for testing if a PHY interface * is SGMII (all variants) * @phydev: the phy_device struct + * @return: true if MII bus is SGMII or false if it is not */ static inline bool phy_interface_is_sgmii(struct phy_device *phydev) { |