diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/P2041RDB.h | 31 | ||||
-rw-r--r-- | include/configs/T102xRDB.h | 32 | ||||
-rw-r--r-- | include/configs/T104xRDB.h | 29 | ||||
-rw-r--r-- | include/configs/T208xQDS.h | 27 | ||||
-rw-r--r-- | include/configs/T208xRDB.h | 29 | ||||
-rw-r--r-- | include/configs/T4240RDB.h | 18 | ||||
-rw-r--r-- | include/configs/corenet_ds.h | 31 | ||||
-rw-r--r-- | include/configs/km/km-mpc8309.h | 3 | ||||
-rw-r--r-- | include/configs/km/pg-wcom-ls102xa.h | 1 | ||||
-rw-r--r-- | include/configs/kmcent2.h | 4 | ||||
-rw-r--r-- | include/configs/kontron_sl28.h | 2 | ||||
-rw-r--r-- | include/configs/ls1012a_common.h | 4 | ||||
-rw-r--r-- | include/configs/ls1021aiot.h | 2 | ||||
-rw-r--r-- | include/configs/ls1021aqds.h | 3 | ||||
-rw-r--r-- | include/configs/ls1021atwr.h | 2 | ||||
-rw-r--r-- | include/configs/ls1043a_common.h | 23 | ||||
-rw-r--r-- | include/configs/ls1046a_common.h | 20 | ||||
-rw-r--r-- | include/configs/ls1046aqds.h | 7 | ||||
-rw-r--r-- | include/configs/lx2162aqds.h | 4 | ||||
-rw-r--r-- | include/configs/p1_p2_rdb_pc.h | 6 |
20 files changed, 8 insertions, 270 deletions
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 198b698..bf8a92c 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2011-2012 Freescale Semiconductor, Inc. - * Copyright 2020 NXP + * Copyright 2020-2021 NXP */ /* @@ -361,35 +361,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 825KB (1650 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) -#elif defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FMAN_FW_ADDR (8 * (128 * 1024)) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #ifdef CONFIG_PCI diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index ef79c1b..89bbeb7 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2020 NXP + * Copyright 2020-2021 NXP */ /* @@ -500,36 +500,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_DPAA_FMAN -/* Default address of microcode for the Linux FMan driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#define CONFIG_SYS_QE_FW_ADDR 0x130000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 4485f40..48fc8a2 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2020 NXP + * Copyright 2020-2021 NXP */ #ifndef __CONFIG_H @@ -501,33 +501,6 @@ #define CONFIG_U_QE -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif - -#if defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_QE_FW_ADDR 0x130000 -#elif defined(CONFIG_SDCARD) -#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) -#else -#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 -#endif - -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index e70d108..78562bc 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -482,33 +482,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_DPAA_RMAN /* RMan */ #define CONFIG_SYS_INTERLAKEN -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index fbe8852..471ed94 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -434,35 +434,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_DPAA_RMAN /* RMan */ #define CONFIG_SYS_INTERLAKEN -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 - -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) - -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 87e3e67..f6ccaf4 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -456,24 +456,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_DPAA_RMAN #define CONFIG_SYS_INTERLAKEN -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 8819935..1e55d52 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2009-2012 Freescale Semiconductor, Inc. - * Copyright 2020 NXP + * Copyright 2020-2021 NXP */ /* @@ -365,35 +365,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 825KB (1650 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) -#elif defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FMAN_FW_ADDR (8 * (128 * 1024)) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #ifdef CONFIG_PCI diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index ff97c6c..869bd9b 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -13,9 +13,6 @@ /* QE microcode/firmware address */ /* between the u-boot partition and env */ -#ifndef CONFIG_SYS_QE_FW_ADDR -#define CONFIG_SYS_QE_FW_ADDR 0xF00C0000 -#endif /* * System IO Config diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index a5bc689..743d09e 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -212,7 +212,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */ -#define CONFIG_SYS_QE_FW_ADDR 0x60020000 #define CONFIG_SYS_BOOTCOUNT_BE diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 91b50cb..8274dd3 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -411,10 +411,6 @@ int get_scl(void); #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -/* Default address of microcode for the Linux Fman driver */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xE8020000 -#define CONFIG_SYS_QE_FW_ADDR 0xE8040000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) /* Qman / Bman */ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 6769592..4152851 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -88,6 +88,8 @@ "envload=env import -d -b ${env_addr}\0" \ "install_rcw=source 20200000\0" \ "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \ + "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \ + "u-boot-env raw 0x3e0000 0x20000\0" \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index d072eaa..4e654ca 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -29,10 +29,6 @@ /* CSU */ #define CONFIG_LAYERSCAPE_NS_ACCESS -/* PFE */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x300000 - /*SPI device */ #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index f73dafe..222caa1 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -174,8 +174,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #endif -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 - #define CONFIG_OF_BOARD_SETUP #define CONFIG_OF_STDOUT_VIA_ALIAS diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 748c04b..27b97ff 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -390,9 +390,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_FSL_DEVICE_DISABLE - -#define CONFIG_SYS_QE_FW_ADDR 0x60940000 - #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 067d4f7..c099629 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -408,8 +408,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x60940000 - /* * Environment */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 6e8eebf..bdf1b43 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -168,29 +168,6 @@ #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_FMAN_FW_ADDR 0x900000 -#define CONFIG_SYS_QE_FW_ADDR 0x940000 - - -#else -#if defined(CONFIG_SD_BOOT) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2040 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) -#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4A00) -#elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 -#else -/* FMan fireware Pre-load address */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 -#define CONFIG_SYS_QE_FW_ADDR 0x60940000 -#endif -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif #endif diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 7822e9d..515f420 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -145,26 +145,6 @@ #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #endif - -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_FMAN_FW_ADDR 0x900000 -#else -#ifdef CONFIG_SD_BOOT -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800). - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) -#elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 -#elif defined(CONFIG_NAND_BOOT) -#define CONFIG_SYS_FMAN_FW_ADDR (36 * (256 * 1024)) -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 -#endif -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 987df5f..8bc09d0 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -27,13 +27,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -/* DSPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif - #ifdef CONFIG_SYS_DPAA_FMAN #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index 7fa3c25..f1b4e1c 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2020 NXP + * Copyright 2020-2021 NXP */ #ifndef __LX2162_QDS_H @@ -60,7 +60,7 @@ u8 qixis_esdhc_detect_quirk(void); "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" \ - "emmc_bootcmd=echo Trying load from emmc card..;" \ + "sd2_bootcmd=echo Trying load from emmc card..;" \ "mmc dev 1; mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd ;" \ "env exists secureboot && mmc read $kernelheader_addr_r "\ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index d3ac057..6b4fc39 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -528,12 +528,6 @@ #define CONFIG_HAS_ETH2 #endif /* CONFIG_TSEC_ENET */ -#ifdef CONFIG_QE -/* QE microcode/firmware address */ -#define CONFIG_SYS_QE_FW_ADDR 0xefec0000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#endif /* CONFIG_QE */ - /* * Environment */ |