aboutsummaryrefslogtreecommitdiff
path: root/drivers/ali512x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ali512x.c')
-rw-r--r--drivers/ali512x.c124
1 files changed, 62 insertions, 62 deletions
diff --git a/drivers/ali512x.c b/drivers/ali512x.c
index e52edd0..7b7edc0 100644
--- a/drivers/ali512x.c
+++ b/drivers/ali512x.c
@@ -58,7 +58,7 @@
*/
static void ali_write(u8 index, u8 value)
-{
+{
/* write an arbirary register */
outb(index, ALI_INDEX);
outb(value, ALI_DATA);
@@ -74,7 +74,7 @@ static int ali_read(u8 index)
#define ALI_OPEN() \
outb(0x51, ALI_INDEX); \
- outb(0x23, ALI_INDEX)
+ outb(0x23, ALI_INDEX)
#define ALI_CLOSE() \
@@ -82,7 +82,7 @@ static int ali_read(u8 index)
/* Select a logical device */
#define ALI_SELDEV(dev) \
- ali_write(0x07, dev)
+ ali_write(0x07, dev)
void ali512x_init(void)
@@ -102,14 +102,14 @@ void ali512x_set_fdc(int enabled, u16 io, u8 irq, u8 dma_channel)
{
ALI_OPEN();
ALI_SELDEV(0);
-
+
ali_write(0x30, enabled?1:0);
if (enabled) {
ali_write(0x60, io >> 8);
ali_write(0x61, io & 0xff);
ali_write(0x70, irq);
ali_write(0x74, dma_channel);
-
+
/* AT mode, no drive swap */
ali_write(0xf0, 0x08);
ali_write(0xf1, 0x00);
@@ -124,14 +124,14 @@ void ali512x_set_pp(int enabled, u16 io, u8 irq, u8 dma_channel)
{
ALI_OPEN();
ALI_SELDEV(3);
-
+
ali_write(0x30, enabled?1:0);
if (enabled) {
ali_write(0x60, io >> 8);
ali_write(0x61, io & 0xff);
ali_write(0x70, irq);
ali_write(0x74, dma_channel);
-
+
/* mode: EPP 1.9, ECP FIFO threshold = 7, IRQ active low */
ali_write(0xf0, 0xbc);
/* 12 MHz, Burst DMA in ECP */
@@ -145,18 +145,18 @@ void ali512x_set_uart(int enabled, int index, u16 io, u8 irq)
{
ALI_OPEN();
ALI_SELDEV(index?5:4);
-
+
ali_write(0x30, enabled?1:0);
if (enabled) {
ali_write(0x60, io >> 8);
ali_write(0x61, io & 0xff);
ali_write(0x70, irq);
-
+
ali_write(0xf0, 0x00);
ali_write(0xf1, 0x00);
-
+
/* huh? write 0xf2 twice - a typo in rolo
- * or some secret ali errata? Who knows?
+ * or some secret ali errata? Who knows?
*/
if (index) {
ali_write(0xf2, 0x00);
@@ -171,7 +171,7 @@ void ali512x_set_uart2_irda(int enabled)
{
ALI_OPEN();
ALI_SELDEV(5);
-
+
ali_write(0xf1, enabled?0x48:0x00); /* fullduplex IrDa */
ALI_CLOSE();
@@ -181,7 +181,7 @@ void ali512x_set_rtc(int enabled, u16 io, u8 irq)
{
ALI_OPEN();
ALI_SELDEV(6);
-
+
ali_write(0x30, enabled?1:0);
if (enabled) {
ali_write(0x60, io >> 8);
@@ -197,12 +197,12 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
{
ALI_OPEN();
ALI_SELDEV(7);
-
+
ali_write(0x30, enabled?1:0);
if (enabled) {
ali_write(0x70, kbc_irq);
- ali_write(0x72, mouse_irq);
-
+ ali_write(0x72, mouse_irq);
+
ali_write(0xf0, 0x00);
}
ALI_CLOSE();
@@ -210,21 +210,21 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
/* Common I/O
- *
+ *
* (This descripotsion is base on several incompete sources
* since I have not been able to obtain any datasheet for the device
- * there may be some mis-understandings burried in here.
+ * there may be some mis-understandings burried in here.
* -- Daniel daniel@omicron.se)
- *
+ *
* There are 22 CIO pins numbered
* 10-17
* 20-25
* 30-37
- *
+ *
* 20-24 are dedicated CIO pins, the other 17 are muliplexed with
* other functions.
- *
- * Secondary
+ *
+ * Secondary
* CIO Pin Function Decription
* =======================================================
* CIO10 IRQIN1 Interrupt input 1?
@@ -235,14 +235,14 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
* CIO15 P20 KBC P21 fucntion
* CIO16 I2C_CLK I2C Clock
* CIO17 I2C_DAT I2C Data
- *
+ *
* CIO20 -
* CIO21 -
* CIO22 -
* CIO23 -
* CIO24 -
* CIO25 LOCK Keylock
- *
+ *
* CIO30 KBC_CLK Keybaord Clock
* CIO31 CS0J General Chip Select decoder CS0J
* CIO32 CS1J General Chip Select decoder CS1J
@@ -252,13 +252,13 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
* CIO36 ALT_MDAT Alternative Mouse Data
* CIO37 ALT_KBC Alternative KBC select
*
- * The CIO use an indirect address scheme.
- *
+ * The CIO use an indirect address scheme.
+ *
* Reigster 3 in the SIO is used to select the index and data
* port addresses where the CIO I/O registers show up.
- * The function selection registers are accessible under
- * function SIO 8.
- *
+ * The function selection registers are accessible under
+ * function SIO 8.
+ *
* SIO reigster 3 (CIO Address Selection) bit definitions:
* bit 7 CIO index and data registers enabled
* bit 1-0 CIO indirect registers port address select
@@ -266,23 +266,23 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
* 1 index = 0xE2 data = 0xE3
* 2 index = 0xE4 data = 0xE5
* 3 index = 0xEA data = 0xEB
- *
+ *
* There are three CIO I/O register accessed via CIO index port and CIO data port
* 0x01 CIO 10-17 data
* 0x02 CIO 20-25 data (bits 7-6 unused)
* 0x03 CIO 30-37 data
- *
- *
- * The pin function is accessed through normal
+ *
+ *
+ * The pin function is accessed through normal
* SIO registers, each register have the same format:
- *
+ *
* Bit Function Value
- * 0 Input/output 1=input
+ * 0 Input/output 1=input
* 1 Polarity of signal 1=inverted
* 2 Unused ??
* 3 Function (normal or special) 1=special
* 7-4 Unused
- *
+ *
* SIO REG
* 0xe0 CIO 10 Config
* 0xe1 CIO 11 Config
@@ -308,7 +308,7 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
* 0xfa CIO 35 Config
* 0xfb CIO 36 Config
* 0xfc CIO 37 Config
- *
+ *
*/
#define ALI_CIO_PORT_SEL 0x83
@@ -318,28 +318,28 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
void ali512x_set_cio(int enabled)
{
int i;
-
+
ALI_OPEN();
-
+
if (enabled) {
ali_write(0x3, ALI_CIO_PORT_SEL); /* Enable CIO data register */
} else {
ali_write(0x3, ALI_CIO_PORT_SEL & ~0x80);
}
-
+
ALI_SELDEV(8);
-
+
ali_write(0x30, enabled?1:0);
-
+
/* set all pins to input to start with */
for (i=0xe0;i<0xee;i++) {
ali_write(i, 1);
}
-
+
for (i=0xf5;i<0xfe;i++) {
ali_write(i, 1);
}
-
+
ALI_CLOSE();
}
@@ -348,23 +348,23 @@ void ali512x_cio_function(int pin, int special, int inv, int input)
{
u8 data;
u8 addr;
-
+
/* valid pins are 10-17, 20-25 and 30-37 */
- if (pin >= 10 && pin <= 17) {
+ if (pin >= 10 && pin <= 17) {
addr = 0xe0+(pin&7);
} else if (pin >= 20 && pin <= 25) {
addr = 0xe8+(pin&7);
- } else if (pin >= 30 && pin <= 37) {
+ } else if (pin >= 30 && pin <= 37) {
addr = 0xf5+(pin&7);
} else {
return;
}
-
+
ALI_OPEN();
ALI_SELDEV(8);
-
-
+
+
data=0xf4;
if (special) {
data |= 0x08;
@@ -376,22 +376,22 @@ void ali512x_cio_function(int pin, int special, int inv, int input)
data |= 0x01;
}
}
-
+
ali_write(addr, data);
-
+
ALI_CLOSE();
}
-void ali512x_cio_out(int pin, int value)
+void ali512x_cio_out(int pin, int value)
{
u8 reg;
u8 data;
u8 bit;
-
+
reg = pin/10;
bit = 1 << (pin%10);
-
-
+
+
outb(reg, ALI_CIO_INDEX); /* select I/O register */
data = inb(ALI_CIO_DATA);
if (value) {
@@ -407,17 +407,17 @@ int ali512x_cio_in(int pin)
u8 reg;
u8 data;
u8 bit;
-
+
/* valid pins are 10-17, 20-25 and 30-37 */
reg = pin/10;
bit = 1 << (pin%10);
-
-
+
+
outb(reg, ALI_CIO_INDEX); /* select I/O register */
data = inb(ALI_CIO_DATA);
-
- return data & bit;
+
+ return data & bit;
}
-
+
#endif
generated by cgit v1.1 at 2024-11-01 22:49:36 +0000