diff options
Diffstat (limited to 'arch/arm')
38 files changed, 1524 insertions, 617 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 1e166c7..c0223d2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -10,7 +10,7 @@ config ARCH_LS1012A select SYS_HAS_SERDES select SYS_FSL_DDR_BE select SYS_FSL_MMDC - select SYS_FSL_ERRATUM_A010315 + select SYS_FSL_ERRATUM_A010315 if PCIE_LAYERSCAPE select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009007 @@ -77,7 +77,7 @@ config ARCH_LS1043A select SYS_FSL_ERRATUM_A009663 if !TFABOOT select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009942 if !TFABOOT - select SYS_FSL_ERRATUM_A010315 + select SYS_FSL_ERRATUM_A010315 if PCIE_LAYERSCAPE select SYS_FSL_ERRATUM_A010539 select SYS_FSL_HAS_DDR3 select SYS_FSL_HAS_DDR4 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 6eb7f9c..4ec0dbf 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -427,7 +427,7 @@ static void fdt_disable_multimedia(void *blob, unsigned int svr) fdt_status_disabled(blob, off); /* Disable GPU node */ - off = fdt_node_offset_by_compatible(blob, -1, "fsl,ls1028a-gpu"); + off = fdt_node_offset_by_compatible(blob, -1, "vivante,gc"); if (off != -FDT_ERR_NOTFOUND) fdt_status_disabled(blob, off); } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c index 49df8b3..86a49b1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c @@ -18,7 +18,7 @@ struct icid_id_table icid_tbl[] = { SET_SATA_ICID(1, "fsl,ls1028a-ahci", FSL_SATA1_STREAM_ID), SET_EDMA_ICID(FSL_EDMA_STREAM_ID), SET_QDMA_ICID("fsl,ls1028a-qdma", FSL_DMA_STREAM_ID), - SET_GPU_ICID("fsl,ls1028a-gpu", FSL_GPU_STREAM_ID), + SET_GPU_ICID("vivante,gc", FSL_GPU_STREAM_ID), SET_DISPLAY_ICID(FSL_DISPLAY_STREAM_ID), #ifdef CONFIG_FSL_CAAM SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c index 730d766..d28ab26 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c @@ -14,11 +14,12 @@ #include <asm/system.h> #include <asm/arch/mp.h> #include <asm/arch/soc.h> +#include <linux/compat.h> #include <linux/delay.h> #include <linux/psci.h> +#include <malloc.h> #include "cpu.h" #include <asm/arch-fsl-layerscape/soc.h> -#include <efi_loader.h> DECLARE_GLOBAL_DATA_PTR; @@ -83,8 +84,7 @@ int fsl_layerscape_wake_seconday_cores(void) int i, timeout = 10; u64 *table; #ifdef CONFIG_EFI_LOADER - u64 reloc_addr = U32_MAX; - efi_status_t ret; + void *reloc_addr; #endif #ifdef COUNTER_FREQUENCY_REAL @@ -102,27 +102,26 @@ int fsl_layerscape_wake_seconday_cores(void) * Keep this after the __real_cntfrq update, so we have it when we * copy the complete section here. */ - ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, - EFI_RESERVED_MEMORY_TYPE, - efi_size_in_pages(secondary_boot_code_size), - &reloc_addr); - if (ret == EFI_SUCCESS) { - debug("Relocating spin table from %llx to %llx (size %lx)\n", - (u64)secondary_boot_code_start, reloc_addr, + reloc_addr = memalign(PAGE_SIZE, + round_up(secondary_boot_code_size, PAGE_SIZE)); + if (reloc_addr) { + debug("Relocating spin table from %p to %p (size %lx)\n", + secondary_boot_code_start, reloc_addr, secondary_boot_code_size); - memcpy((void *)reloc_addr, secondary_boot_code_start, + memcpy(reloc_addr, secondary_boot_code_start, secondary_boot_code_size); - flush_dcache_range(reloc_addr, - reloc_addr + secondary_boot_code_size); + flush_dcache_range((unsigned long)reloc_addr, + (unsigned long)reloc_addr + + secondary_boot_code_size); /* set new entry point for secondary cores */ - secondary_boot_addr += (void *)reloc_addr - + secondary_boot_addr += reloc_addr - secondary_boot_code_start; flush_dcache_range((unsigned long)&secondary_boot_addr, (unsigned long)&secondary_boot_addr + 8); /* this will be used to reserve the memory */ - secondary_boot_code_start = (void *)reloc_addr; + secondary_boot_code_start = reloc_addr; } #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index a08ed3f..d3a5cfa 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -929,25 +929,23 @@ __weak int fsl_board_late_init(void) #define DWC3_GSBUSCFG0_CACHETYPE(n) (((n) & 0xffff) \ << DWC3_GSBUSCFG0_CACHETYPE_SHIFT) -void enable_dwc3_snooping(void) +static void enable_dwc3_snooping(void) { - int ret; - u32 val; - struct udevice *bus; - struct uclass *uc; + static const char * const compatibles[] = { + "fsl,layerscape-dwc3", + "fsl,ls1028a-dwc3", + }; fdt_addr_t dwc3_base; + ofnode node; + u32 val; + int i; - ret = uclass_get(UCLASS_USB, &uc); - if (ret) - return; - - uclass_foreach_dev(bus, uc) { - if (!strcmp(bus->driver->of_match->compatible, "fsl,layerscape-dwc3")) { - dwc3_base = devfdt_get_addr(bus); - if (dwc3_base == FDT_ADDR_T_NONE) { - dev_err(bus, "dwc3 regs missing\n"); + for (i = 0; i < ARRAY_SIZE(compatibles); i++) { + ofnode_for_each_compatible_node(node, compatibles[i]) { + dwc3_base = ofnode_get_addr(node); + if (dwc3_base == FDT_ADDR_T_NONE) continue; - } + val = in_le32(dwc3_base + DWC3_GSBUSCFG0); val &= ~DWC3_GSBUSCFG0_CACHETYPE(~0); val |= DWC3_GSBUSCFG0_CACHETYPE(0x2222); diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi index 2894842..0ea899c 100644 --- a/arch/arm/dts/fsl-ls1012a.dtsi +++ b/arch/arm/dts/fsl-ls1012a.dtsi @@ -49,7 +49,7 @@ interrupts = <0 64 0x4>; clock-names = "dspi"; clocks = <&clockgen 4 0>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -157,7 +157,7 @@ compatible = "fsl,ls1012a-ahci"; reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ 0x0 0x20140520 0x0 0x4>; /* ecc sata addr */ - reg-names = "sata-base", "ecc-addr"; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 4>; clocks = <&clockgen 4 0>; status = "disabled"; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index b3861ed..d4b8332 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -4,17 +4,20 @@ / { aliases { - mmc0 = &esdhc1; - mmc1 = &esdhc0; i2c0 = &i2c0; i2c1 = &i2c3; i2c2 = &i2c4; - rtc0 = &rtc; - ethernet2 = &enetc2; - ethernet3 = &enetc6; + ethernet2 = &enetc_port2; + ethernet3 = &enetc_port3; }; binman: binman { + multiple-images; + }; +}; + +&binman { + u_boot_rom: u-boot-rom { filename = "u-boot.rom"; pad-byte = <0xff>; @@ -133,6 +136,31 @@ }; }; +&binman { + u-boot-update { + filename = "u-boot.update"; + + fit { + description = "FIT update image"; + + images { + u-boot-bin { + description = "U-Boot"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <0>; /* unused */ + + blob { + filename = "u-boot.rom"; + }; + }; + }; + }; + }; +}; + #ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE / { chosen { @@ -142,7 +170,7 @@ #endif #ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31 -&binman { +&u_boot_rom { fit { images { bl31 { @@ -191,7 +219,7 @@ #endif #ifdef CONFIG_SL28_SPL_LOADS_OPTEE_BL32 -&binman { +&u_boot_rom { fit { images { bl32 { @@ -234,11 +262,6 @@ }; #endif -&i2c0 { - rtc: rtc@32 { - }; -}; - &fspi { u-boot,dm-pre-reloc; flash@0 { @@ -250,7 +273,7 @@ u-boot,dm-pre-reloc; }; -&esdhc0 { +&esdhc { u-boot,dm-pre-reloc; }; @@ -262,7 +285,28 @@ u-boot,dm-pre-reloc; }; -&serial0 { +&duart0 { + u-boot,dm-pre-reloc; +}; + +/* + * u-boot will enable the device in the linux device tree in place. Because + * we are using the linux device tree, we have to enable the PCI controller + * ourselves. + */ +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&soc { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi index 98e8939..a46e07d 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi @@ -3,6 +3,6 @@ / { aliases { - ethernet0 = &enetc1; + ethernet0 = &enetc_port1; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts index 33d85ed..7cd29ab 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts @@ -8,7 +8,7 @@ * None of the four SerDes lanes are used by the module, instead they are * all led out to the carrier for customer use. * - * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -21,28 +21,17 @@ compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a"; }; -&enetc0 { - status = "disabled"; - /delete-property/ phy-handle; -}; - -&enetc1 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; -}; +&enetc_mdio_pf3 { + /* Delete unused phy node */ + /delete-node/ ethernet-phy@5; -/delete-node/ &phy0; -&mdio0 { phy0: ethernet-phy@4 { reg = <0x4>; eee-broken-1000t; eee-broken-100tx; - qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; qca,keep-pll-enabled; - vddio-supply = <&vddio>; vddio: vddio-regulator { @@ -56,3 +45,15 @@ }; }; }; + +&enetc_port0 { + status = "disabled"; + /* Delete the phy-handle to the old phy0 label */ + /delete-property/ phy-handle; +}; + +&enetc_port1 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi index 4e0ce3f..c010ea0 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi @@ -7,3 +7,11 @@ ethernet1 = &mscc_felix_port1; }; }; + +&mscc_felix_port0 { + label = "gbe0"; +}; + +&mscc_felix_port1 { + label = "gbe1"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts index 7a3aa21..330e34f93 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts @@ -2,10 +2,10 @@ /* * Device Tree file for the Kontron SMARC-sAL28 board. * - * This is for the network variant 2 which has no ethernet support in the - * bootloader. + * This is for the network variant 2 which has two ethernet ports. These + * ports are connected to the internal switch. * - * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -17,12 +17,25 @@ compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a"; }; -&enetc0 { +&enetc_mdio_pf3 { + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + +&enetc_port0 { status = "disabled"; + /* + * In the base device tree the PHY at address 5 was assigned for + * this port. On this module this PHY is connected to a switch + * port instead. Therefore, delete the phy-handle property here. + */ /delete-property/ phy-handle; }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -31,35 +44,22 @@ }; &mscc_felix_port0 { - label = "gbe0"; + label = "swp0"; + managed = "in-band-status"; phy-handle = <&phy0>; phy-mode = "sgmii"; status = "okay"; }; &mscc_felix_port1 { - label = "gbe1"; + label = "swp1"; + managed = "in-band-status"; phy-handle = <&phy1>; phy-mode = "sgmii"; status = "okay"; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; - -/delete-node/ &phy0; -&mdio0 { - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; - - phy1: ethernet-phy@4 { - reg = <0x4>; - eee-broken-1000t; - eee-broken-100tx; - }; -}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi index 879a764..3d6bf5a 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi @@ -3,6 +3,6 @@ / { aliases { - ethernet0 = &enetc0; + ethernet0 = &enetc_port0; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi index fce4694..5d82973 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi @@ -3,7 +3,7 @@ / { aliases { - ethernet0 = &enetc0; - ethernet1 = &enetc1; + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts index b95e082..9b5e92f 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts @@ -5,7 +5,7 @@ * This is for the network variant 4 which has two ethernet ports. It * extends the base and provides one more port connected via RGMII. * - * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -18,22 +18,14 @@ compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; }; -&enetc1 { - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - status = "okay"; -}; - -&mdio0 { +&enetc_mdio_pf3 { phy1: ethernet-phy@4 { reg = <0x4>; eee-broken-1000t; eee-broken-100tx; - qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; qca,keep-pll-enabled; - vddio-supply = <&vddio>; vddio: vddio-regulator { @@ -47,3 +39,9 @@ }; }; }; + +&enetc_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts index 7f237c3..ab713b4 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts @@ -2,23 +2,61 @@ /* * Device Tree file for the Kontron SMARC-sAL28 board. * - * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Kontron SMARC-sAL28"; compatible = "kontron,sl28", "fsl,ls1028a"; aliases { - serial0 = &serial0; - serial1 = &serial1; + crypto = &crypto; + serial0 = &duart0; + serial1 = &duart1; serial2 = &lpuart1; spi0 = &fspi; spi1 = &dspi2; + mmc0 = &esdhc1; + mmc1 = &esdhc; + rtc0 = &rtc; + rtc1 = &ftm_alarm0; + }; + + buttons0 { + compatible = "gpio-keys"; + + power-button { + interrupts-extended = <&sl28cpld_intc + 4 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + label = "Power"; + }; + + sleep-button { + interrupts-extended = <&sl28cpld_intc + 5 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_SLEEP>; + label = "Sleep"; + }; + }; + + buttons1 { + compatible = "gpio-keys-polled"; + poll-interval = <200>; + + lid-switch { + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>; + label = "Lid"; + }; }; chosen { @@ -26,25 +64,38 @@ }; }; +&can0 { + status = "okay"; +}; + &dspi2 { status = "okay"; }; -&enetc0 { - phy-handle = <&phy0>; - phy-mode = "sgmii"; +&duart0 { + status = "okay"; +}; + +&duart1 { status = "okay"; }; -&enetc2 { - status = "disabled"; +&enetc_mdio_pf3 { + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; }; -&enetc6 { - status = "disabled"; +&enetc_port0 { + phy-handle = <&phy0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; }; -&esdhc0 { +&esdhc { sd-uhs-sdr104; sd-uhs-sdr50; sd-uhs-sdr25; @@ -63,8 +114,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <133000000>; @@ -72,17 +121,167 @@ /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */ spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x1d0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x1d0000>; + label = "bootloader"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; + }; }; }; +&gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "TDO", "TCK", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "TMS", "TDI", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c0 { status = "okay"; - rtc@32 { + rtc: rtc@32 { compatible = "microcrystal,rv8803"; reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; @@ -107,32 +306,3 @@ &lpuart1 { status = "okay"; }; - -&mdio0 { - status = "okay"; - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; -}; - -&sata { - status = "okay"; -}; - -&serial0 { - status = "okay"; -}; - -&serial1 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi index 4063d9a..f4c557e 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi @@ -13,8 +13,8 @@ #include "fsl-sch-30842.dtsi" }; -&enetc0 { +&enetc_port0 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi index 548ab2b..69274ee 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi @@ -12,8 +12,8 @@ #include "fsl-sch-30842.dtsi" }; -&enetc0 { +&enetc_port0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi index 3991fb7..90da665 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi @@ -20,7 +20,7 @@ #include "fsl-sch-30841.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -31,28 +31,28 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi index d68c8c2..27c3d65 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi @@ -9,7 +9,7 @@ #include "fsl-sch-30841.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -20,16 +20,16 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi index 94b5081..7d197c3 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi @@ -12,8 +12,8 @@ #include "fsl-sch-24801.dtsi" }; -&enetc0 { +&enetc_port0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi index 3b85026..992092e 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi @@ -34,7 +34,7 @@ #include "fsl-sch-24801.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -45,28 +45,28 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi index eb63214..a905d77 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi @@ -19,7 +19,7 @@ #include "fsl-sch-24801.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -30,28 +30,28 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-duart.dts b/arch/arm/dts/fsl-ls1028a-qds-duart.dts index 83264e0..81db21a 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-duart.dts +++ b/arch/arm/dts/fsl-ls1028a-qds-duart.dts @@ -10,6 +10,6 @@ / { chosen { - stdout-path = &serial0; + stdout-path = &duart0; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi index ed86da6..62e818f 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi @@ -19,7 +19,7 @@ #include "fsl-sch-30841.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -30,28 +30,28 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi index c9de4ec..6f1f6cb 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -13,7 +13,7 @@ #include "fsl-sch-28021.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -24,28 +24,28 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi index 7f78550..6c0d8b2 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi @@ -9,7 +9,7 @@ #include "fsl-sch-30842.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -20,10 +20,10 @@ &mscc_felix_port1 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi index 0fbe772..9af6a5a 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi @@ -9,7 +9,7 @@ #include "fsl-sch-30842.dtsi" }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -20,10 +20,10 @@ &mscc_felix_port2 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds.dtsi b/arch/arm/dts/fsl-ls1028a-qds.dtsi index 69632fa..0da0a7b 100644 --- a/arch/arm/dts/fsl-ls1028a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds.dtsi @@ -105,7 +105,7 @@ }; }; -&esdhc0 { +&esdhc { status = "okay"; }; @@ -130,7 +130,6 @@ &i2c0 { status = "okay"; - u-boot,dm-pre-reloc; fpga@66 { #address-cells = <1>; @@ -145,7 +144,7 @@ reg = <0x54>; #mux-control-cells = <1>; mux-reg-masks = <0x54 0xf0>; - mdio-parent-bus = <&mdio0>; + mdio-parent-bus = <&enetc_mdio_pf3>; /* on-board MDIO with a single RGMII PHY */ mdio@00 { @@ -233,29 +232,37 @@ status = "okay"; }; -&serial0 { +&duart0 { status = "okay"; }; -&serial1 { +&duart1 { status = "okay"; }; -&usb1 { +&pcie1 { + status = "okay"; +}; + +&pcie2 { status = "okay"; }; -&usb2 { +&usb0 { + status = "okay"; +}; + +&usb1 { status = "okay"; }; -&enetc1 { +&enetc_port1 { status = "okay"; phy-mode = "rgmii-id"; phy-handle = <&qds_phy0>; }; -&mdio0 { +&enetc_mdio_pf3 { status = "okay"; }; diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index 82a8c0a..537ebbc 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -15,8 +15,8 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { spi0 = &fspi; - ethernet0 = &enetc0; - ethernet1 = &enetc2; + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port2; ethernet2 = &mscc_felix_port0; ethernet3 = &mscc_felix_port1; ethernet4 = &mscc_felix_port2; @@ -36,7 +36,7 @@ status = "okay"; }; -&esdhc0 { +&esdhc { status = "okay"; }; @@ -61,7 +61,6 @@ &i2c0 { status = "okay"; - u-boot,dm-pre-reloc; i2c-mux@77 { @@ -115,29 +114,37 @@ status = "okay"; }; -&serial0 { +&duart0 { status = "okay"; }; -&serial1 { +&duart1 { status = "okay"; }; -&usb1 { +&pcie1 { + status = "okay"; +}; + +&pcie2 { status = "okay"; }; -&usb2 { +&usb0 { + status = "okay"; +}; + +&usb1 { status = "okay"; }; -&enetc0 { +&enetc_port0 { status = "okay"; phy-mode = "sgmii"; phy-handle = <&rdb_phy0>; }; -&enetc2 { +&enetc_port2 { status = "okay"; }; @@ -174,11 +181,11 @@ }; &mscc_felix_port4 { - ethernet = <&enetc2>; + ethernet = <&enetc_port2>; status = "okay"; }; -&mdio0 { +&enetc_mdio_pf3 { status = "okay"; rdb_phy0: phy@2 { reg = <2>; diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 53b052e..06b36cc 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -1,12 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * NXP ls1028a SOC common device tree source + * Device Tree Include file for NXP Layerscape-1028A family SoC. * - * Copyright 2019-2020 NXP + * Copyright 2018-2020 NXP + * + * Harninder Rai <harninder.rai@nxp.com> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1028a"; @@ -14,6 +18,54 @@ #address-cells = <2>; #size-cells = <2>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "psci"; + + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -21,27 +73,33 @@ clock-output-names = "sysclk"; }; - clockgen: clocking@1300000 { - compatible = "fsl,ls1028a-clockgen"; - reg = <0x0 0x1300000 0x0 0xa0000>; - #clock-cells = <2>; - clocks = <&sysclk>; + osc_27m: clock-osc-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "phy_27m"; }; - memory@01080000 { - device_type = "memory"; - reg = <0x00000000 0x01080000 0 0x80000000>; - /* DRAM space - 1, size : 2 GB DRAM */ + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0xffff>; + #clock-cells = <0>; + clocks = <&osc_27m>; }; - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06040000 0 0x40000>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | - IRQ_TYPE_LEVEL_LOW)>; + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&rst>; + offset = <0>; + mask = <0x02>; }; timer { @@ -56,432 +114,1049 @@ IRQ_TYPE_LEVEL_LOW)>; }; - fspi: flexspi@20c0000 { - compatible = "nxp,lx2160a-fspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20c0000 0x0 0x10000>, - <0x0 0x20000000 0x0 0x10000000>; - reg-names = "fspi_base", "fspi_mmap"; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "fspi_en", "fspi"; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - serial0: serial@21c0500 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + gic: interrupt-controller@6000000 { + compatible= "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ + #interrupt-cells= <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ + }; }; - serial1: serial@21c0600 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + thermal-zones { + ddr-controller { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; - pcie1: pcie@3400000 { - compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; - reg = <0x00 0x03400000 0x0 0x80000 - 0x00 0x03480000 0x0 0x40000 /* lut registers */ - 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ - 0x80 0x00000000 0x0 0x20000>; /* configuration space */ - reg-names = "dbi", "lut", "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - }; + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; - pcie2: pcie@3500000 { - compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; - reg = <0x00 0x03500000 0x0 0x80000 - 0x00 0x03580000 0x0 0x40000 /* lut registers */ - 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ - 0x88 0x00000000 0x0 0x20000>; /* configuration space */ - reg-names = "dbi", "lut", "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; - pcie@1f0000000 { - compatible = "pci-host-ecam-generic"; - /* ECAM bus 0, HW has more space reserved but not populated */ - bus-range = <0x0 0x0>; - reg = <0x01 0xf0000000 0x0 0x100000>; - #address-cells = <3>; + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; #size-cells = <2>; - device_type = "pci"; - ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>; - enetc0: pci@0,0 { - reg = <0x000000 0 0 0 0>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + }; + + dcfg: syscon@1e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; + reg = <0x0 0x1e00000 0x0 0x10000>; + ranges = <0x0 0x0 0x1e00000 0x10000>; + little-endian; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; + clock-output-names = "fspi_clk"; + }; + }; + + rst: syscon@1e60000 { + compatible = "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + little-endian; + }; + + scfg: syscon@1fc0000 { + compatible = "fsl,ls1028a-scfg", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clock-controller@1300000 { + compatible = "fsl,ls1028a-clockgen"; + reg = <0x0 0x1300000 0x0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; - enetc1: pci@0,1 { - reg = <0x000100 0 0 0 0>; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; - enetc2: pci@0,2 { - reg = <0x000200 0 0 0 0>; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; - phy-mode = "internal"; + }; - fixed-link { - speed = <2500>; - full-duplex; - }; + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + status = "disabled"; }; - mdio0: pci@0,3 { - #address-cells=<0>; - #size-cells=<1>; - reg = <0x000300 0 0 0 0>; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; + }; - fixed-link { - speed = <1000>; - full-duplex; - }; + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + status = "disabled"; }; - mscc_felix: pci@0,5 { - reg = <0x000500 0 0 0 0>; + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + status = "disabled"; + }; - mscc_felix_port0: port@0 { - reg = <0>; - status = "disabled"; - }; + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&fspi_clk>, <&fspi_clk>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; - mscc_felix_port1: port@1 { - reg = <1>; - status = "disabled"; - }; + dspi0: spi@2100000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 62>, <&edma0 0 60>; + dma-names = "tx", "rx"; + spi-num-chipselects = <4>; + little-endian; + status = "disabled"; + }; - mscc_felix_port2: port@2 { - reg = <2>; - status = "disabled"; - }; + dspi1: spi@2110000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 58>, <&edma0 0 56>; + dma-names = "tx", "rx"; + spi-num-chipselects = <4>; + little-endian; + status = "disabled"; + }; - mscc_felix_port3: port@3 { - reg = <3>; - status = "disabled"; - }; + dspi2: spi@2120000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 54>, <&edma0 0 2>; + dma-names = "tx", "rx"; + spi-num-chipselects = <3>; + little-endian; + status = "disabled"; + }; - mscc_felix_port4: port@4 { - reg = <4>; - phy-mode = "internal"; - status = "disabled"; + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; - fixed-link { - speed = <2500>; - full-duplex; - }; - }; + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; + voltage-ranges = <1800 1800>; + sdhci,auto-cmd12; + non-removable; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + can0: can@2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - mscc_felix_port5: port@5 { - reg = <5>; - phy-mode = "internal"; - status = "disabled"; + can1: can@2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - fixed-link { - speed = <1000>; - full-duplex; - }; + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + status = "disabled"; + }; - }; + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + status = "disabled"; + }; + + + lpuart0: serial@2260000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2260000 0x0 0x1000>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + status = "disabled"; + }; + + lpuart1: serial@2270000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2270000 0x0 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + status = "disabled"; + }; + + lpuart2: serial@2280000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2280000 0x0 0x1000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + status = "disabled"; + }; + + lpuart3: serial@2290000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2290000 0x0 0x1000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + status = "disabled"; + }; + + lpuart4: serial@22a0000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x22a0000 0x0 0x1000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + status = "disabled"; + }; + + lpuart5: serial@22b0000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x22b0000 0x0 0x1000>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + status = "disabled"; + }; + + edma0: dma-controller@22c0000 { + #dma-cells = <2>; + compatible = "fsl,ls1028a-edma", "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; + + gpio1: gpio@2300000 { + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + little-endian; + }; + + gpio2: gpio@2310000 { + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + little-endian; + }; + + gpio3: gpio@2320000 { + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + little-endian; + }; + + usb0: usb@3100000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + usb1: usb@3110000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1028a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + status = "disabled"; + }; + + pcie1: pcie@3400000 { + compatible = "fsl,ls1028a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie2: pcie@3500000 { + compatible = "fsl,ls1028a-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <8>; + #iommu-cells = <1>; + stream-match-mask = <0x7c00>; + /* global secure fault */ + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + /* combined secure interrupt */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + /* global non-secure fault */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + /* combined non-secure interrupt */ + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + /* performance counter interrupts 0-7 */ + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + /* per context interrupt, 64 interrupts */ + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + }; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; - enetc6: pci@0,6 { - reg = <0x000600 0 0 0 0>; + qdma: dma-controller@8380000 { + compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + }; + + cluster1_core0_watchdog: watchdog@c000000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster1_core1_watchdog: watchdog@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + sai1: audio-controller@f100000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf100000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 4>, + <&edma0 1 3>; + fsl,sai-asynchronous; status = "disabled"; - phy-mode = "internal"; }; - }; - i2c0: i2c@2000000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + sai2: audio-controller@f110000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf110000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 6>, + <&edma0 1 5>; + fsl,sai-asynchronous; + status = "disabled"; + }; - i2c1: i2c@2010000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + sai3: audio-controller@f120000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf120000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 8>, + <&edma0 1 7>; + fsl,sai-asynchronous; + status = "disabled"; + }; - i2c2: i2c@2020000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + sai4: audio-controller@f130000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf130000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 10>, + <&edma0 1 9>; + fsl,sai-asynchronous; + status = "disabled"; + }; - i2c3: i2c@2030000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + sai5: audio-controller@f140000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf140000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 12>, + <&edma0 1 11>; + fsl,sai-asynchronous; + status = "disabled"; + }; - i2c4: i2c@2040000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2040000 0x0 0x10000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + sai6: audio-controller@f150000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf150000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 14>, + <&edma0 1 13>; + fsl,sai-asynchronous; + status = "disabled"; + }; - i2c5: i2c@2050000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2050000 0x0 0x10000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000024 + 0x00000001 0x0000002b + 0x00000002 0x00000031 + 0x00000003 0x00000038 + 0x00000004 0x0000003f + 0x00000005 0x00000045 + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x00000060 + 0x0000000a 0x00000066 + 0x0000000b 0x0000006d - i2c6: i2c@2060000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2060000 0x0 0x10000>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + 0x00010000 0x0000001c + 0x00010001 0x00000024 + 0x00010002 0x0000002c + 0x00010003 0x00000035 + 0x00010004 0x0000003d + 0x00010005 0x00000045 + 0x00010006 0x0000004d + 0x00010007 0x00000055 + 0x00010008 0x0000005e + 0x00010009 0x00000066 + 0x0001000a 0x0000006e - i2c7: i2c@2070000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2070000 0x0 0x10000>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; + 0x00020000 0x00000018 + 0x00020001 0x00000022 + 0x00020002 0x0000002d + 0x00020003 0x00000038 + 0x00020004 0x00000043 + 0x00020005 0x0000004d + 0x00020006 0x00000058 + 0x00020007 0x00000063 + 0x00020008 0x0000006e - lpuart0: serial@2260000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2260000 0x0 0x1000>; - interrupts = <0 232 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000029 + 0x00030003 0x00000036 + 0x00030004 0x00000042 + 0x00030005 0x0000004f + 0x00030006 0x0000005b + 0x00030007 0x00000068>; + little-endian; + #thermal-sensor-cells = <1>; + }; - lpuart1: serial@2270000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2270000 0x0 0x1000>; - interrupts = <0 233 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ + compatible = "pci-host-ecam-generic"; + reg = <0x01 0xf0000000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + msi-parent = <&its>; + device_type = "pci"; + bus-range = <0x0 0x0>; + dma-coherent; + msi-map = <0 &its 0x17 0xe>; + iommu-map = <0 &smmu 0x17 0xe>; + /* PF0-6 BAR0 - non-prefetchable memory */ + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 + /* PF0-6 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 + /* PF0: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 + /* PF0: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 + /* PF1: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 + /* PF1: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 + /* BAR4 (PF5) - non-prefetchable memory */ + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; - lpuart2: serial@2280000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2280000 0x0 0x1000>; - interrupts = <0 234 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + enetc_port0: ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + status = "disabled"; + }; - lpuart3: serial@2290000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x2290000 0x0 0x1000>; - interrupts = <0 235 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + enetc_port1: ethernet@0,1 { + compatible = "fsl,enetc"; + reg = <0x000100 0 0 0 0>; + status = "disabled"; + }; - lpuart4: serial@22a0000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x22a0000 0x0 0x1000>; - interrupts = <0 236 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + enetc_port2: ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + phy-mode = "internal"; + status = "disabled"; - lpuart5: serial@22b0000 { - compatible = "fsl,ls1021a-lpuart"; - reg = <0x0 0x22b0000 0x0 0x1000>; - interrupts = <0 237 0x4>; - clocks = <&sysclk>; - clock-names = "ipg"; - little-endian; - status = "disabled"; - }; + fixed-link { + speed = <2500>; + full-duplex; + }; + }; - usb1: usb3@3100000 { - compatible = "fsl,layerscape-dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - status = "disabled"; - }; + enetc_mdio_pf3: mdio@0,3 { + compatible = "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + }; - usb2: usb3@3110000 { - compatible = "fsl,layerscape-dwc3"; - reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - status = "disabled"; - }; + ethernet@0,4 { + compatible = "fsl,enetc-ptp"; + reg = <0x000400 0 0 0 0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; + little-endian; + fsl,extts-fifo; + }; - dspi0: dspi@2100000 { - compatible = "fsl,vf610-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "dspi"; - clocks = <&clockgen 4 0>; - num-cs = <5>; - litte-endian; - status = "disabled"; - }; + mscc_felix: ethernet-switch@0,5 { + reg = <0x000500 0 0 0 0>; + /* IEP INT_B */ + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; - dspi1: dspi@2110000 { - compatible = "fsl,vf610-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2110000 0x0 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "dspi"; - clocks = <&clockgen 4 0>; - num-cs = <5>; - little-endian; - status = "disabled"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - dspi2: dspi@2120000 { - compatible = "fsl,vf610-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2120000 0x0 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "dspi"; - clocks = <&clockgen 4 0>; - num-cs = <5>; - little-endian; - status = "disabled"; - }; + /* External ports */ + mscc_felix_port0: port@0 { + reg = <0>; + status = "disabled"; + }; - esdhc0: esdhc@2140000 { - compatible = "fsl,esdhc"; - reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - big-endian; - bus-width = <4>; - status = "disabled"; - }; + mscc_felix_port1: port@1 { + reg = <1>; + status = "disabled"; + }; - esdhc1: esdhc@2150000 { - compatible = "fsl,esdhc"; - reg = <0x0 0x2150000 0x0 0x10000>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - big-endian; - non-removable; - bus-width = <4>; - status = "disabled"; - }; + mscc_felix_port2: port@2 { + reg = <2>; + status = "disabled"; + }; - gpio0: gpio@2300000 { - compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; - reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - little-endian; - }; + mscc_felix_port3: port@3 { + reg = <3>; + status = "disabled"; + }; - gpio1: gpio@2310000 { - compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; - reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - little-endian; - }; + /* Internal ports */ + mscc_felix_port4: port@4 { + reg = <4>; + phy-mode = "internal"; + status = "disabled"; - gpio2: gpio@2320000 { - compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; - reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - little-endian; - }; + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mscc_felix_port5: port@5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; - sata: sata@3200000 { - compatible = "fsl,ls1028a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ - 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ - reg-names = "sata-base", "ecc-addr"; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + enetc_port3: ethernet@0,6 { + compatible = "fsl,enetc"; + reg = <0x000600 0 0 0 0>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* Integrated Endpoint Register Block */ + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; + }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + little-endian; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1028a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; }; - cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt"; - reg = <0x0 0xc000000 0x0 0x1000>; + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dp0_out: endpoint { + + }; + }; }; }; diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index d8171bd..52dc5a9 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -53,7 +53,7 @@ interrupts = <0 64 0x4>; clock-names = "dspi"; clocks = <&clockgen 4 0>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -66,7 +66,7 @@ interrupts = <0 65 0x4>; clock-names = "dspi"; clocks = <&clockgen 4 0>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -331,7 +331,7 @@ compatible = "fsl,ls1043a-ahci"; reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ 0x0 0x20140520 0x0 0x4>; /* ecc sata addr*/ - reg-names = "sata-base", "ecc-addr"; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 4>; clocks = <&clockgen 4 0>; status = "disabled"; diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi index 9df419a..a60cbf1 100644 --- a/arch/arm/dts/fsl-ls1046a.dtsi +++ b/arch/arm/dts/fsl-ls1046a.dtsi @@ -52,7 +52,7 @@ interrupts = <0 64 0x4>; clock-names = "dspi"; clocks = <&clockgen 4 0>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -65,7 +65,7 @@ interrupts = <0 65 0x4>; clock-names = "dspi"; clocks = <&clockgen 4 0>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -367,7 +367,7 @@ compatible = "fsl,ls1046a-ahci"; reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ 0x0 0x20140520 0x0 0x4>; /* ecc sata addr*/ - reg-names = "sata-base", "ecc-addr"; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 4>; clocks = <&clockgen 4 1>; status = "disabled"; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index 3a5a50f..f73fdfd 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -89,7 +89,7 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - num-cs = <6>; + spi-num-chipselects = <6>; }; qspi: quadspi@1550000 { @@ -99,7 +99,7 @@ reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; - num-cs = <4>; + status = "disabled"; }; esdhc: esdhc@2140000 { @@ -226,7 +226,7 @@ compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ - reg-names = "sata-base", "ecc-addr"; + reg-names = "ahci", "sata-ecc"; interrupts = <0 133 4>; status = "disabled"; }; diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index 278daee..72ba525 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -93,7 +93,7 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - num-cs = <6>; + spi-num-chipselects = <6>; }; qspi: quadspi@1550000 { diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index 3b5f0d1..52e4d72 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -172,7 +172,7 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - num-cs = <6>; + spi-num-chipselects = <6>; }; dspi1: dspi@2110000 { @@ -181,7 +181,7 @@ #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - num-cs = <6>; + spi-num-chipselects = <6>; }; dspi2: dspi@2120000 { @@ -190,7 +190,7 @@ #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <0 241 0x4>; /* Level high type */ - num-cs = <6>; + spi-num-chipselects = <6>; }; gpio0: gpio@2300000 { diff --git a/arch/arm/dts/hi3660.dtsi b/arch/arm/dts/hi3660.dtsi index 65a45b0..028f4db 100644 --- a/arch/arm/dts/hi3660.dtsi +++ b/arch/arm/dts/hi3660.dtsi @@ -1087,7 +1087,7 @@ }; watchdog0: watchdog@e8a06000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a06000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_OSC32K>; @@ -1095,7 +1095,7 @@ }; watchdog1: watchdog@e8a07000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a07000 0x0 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_OSC32K>; diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi index 7ba2dd2..86192cb 100644 --- a/arch/arm/dts/ls1021a.dtsi +++ b/arch/arm/dts/ls1021a.dtsi @@ -190,7 +190,7 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&platform_clk 1>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -203,7 +203,7 @@ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&platform_clk 1>; - num-cs = <6>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -469,7 +469,7 @@ sata: sata@3200000 { compatible = "fsl,ls1021a-ahci"; reg = <0x3200000 0x10000 0x20220520 0x4>; - reg-names = "sata-base", "ecc-addr"; + reg-names = "ahci", "sata-ecc"; interrupts = <0 101 4>; status = "disabled"; }; diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi index 5ba13dc..1bdaf3d 100644 --- a/arch/arm/dts/vf.dtsi +++ b/arch/arm/dts/vf.dtsi @@ -70,7 +70,7 @@ #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002c000 0x1000>; - num-cs = <5>; + spi-num-chipselects = <5>; status = "disabled"; }; @@ -79,7 +79,7 @@ #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002d000 0x1000>; - num-cs = <5>; + spi-num-chipselects = <5>; status = "disabled"; }; |