diff options
141 files changed, 2396 insertions, 116 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 80f0960..b2f7fcb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1620,6 +1620,16 @@ config TARGET_LS1046AFRWY development platform that supports the QorIQ LS1046A Layerscape Architecture processor. +config TARGET_SL28 + bool "Support sl28" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + select SUPPORT_SPL + select BINMAN + help + Support for Kontron SMARC-sAL28 board. + config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA @@ -1998,6 +2008,7 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" +source "board/kontron/sl28/Kconfig" source "board/myir/mys_6ulx/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index e610528..596b88d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1147,15 +1147,15 @@ int arch_early_init_r(void) * EC*_PMUX(rgmii) bits in RCW. * e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from * serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits - * Now if a dpmac is enabled by serdes bits then it takes precedence - * over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol - * that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, - * then the dpmac is SGMII and not RGMII. + * Now if a dpmac is enabled as RGMII through ECx_PMUX then it takes + * precedence over SerDes protocol. i.e. in LX2160A if we select serdes + * protocol that configures dpmac17 as SGMII and set the EC1_PMUX as + * RGMII, then the dpmac is RGMII and not SGMII. * - * Therefore, move the fsl_rgmii_init after fsl_serdes_init. in - * fsl_rgmii_init function of SOC, we will check if the dpmac is enabled - * or not? if it is (fsl_serdes_init has already enabled the dpmac), - * then don't enable it. + * Therefore, even thought fsl_rgmii_init is after fsl_serdes_init + * function of SOC, the dpmac will be enabled as RGMII even if it was + * also enabled before as SGMII. If ECx_PMUX is not configured for + * RGMII, DPMAC will remain configured as SGMII from fsl_serdes_init(). */ fsl_rgmii_init(); #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra new file mode 100644 index 0000000..43db4d8 --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra @@ -0,0 +1,67 @@ +# +# Copyright 2020 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +Specifying extra IOMMU mappings for PCI controllers + +This feature can be enabled through the PCI_IOMMU_EXTRA_MAPPINGS Kconfig option. + +The "pci_iommu_extra" env var or "pci-iommu-extra" device tree property (to be +used for example in more static scenarios such as hardwired PCI endpoints that +get initialized later in the system setup) allows two things: + - for a SRIOV capable PCI EP identified by its B.D.F specify the maximum number + of VFs that will ever be created for it + - for hot-plug case, specify the B.D.F with which the device will show up on + the PCI bus + +The env var consists of a list of <bdf>,<action> pairs for a certain pci bus +identified by its controller's base register address, as defined in the "reg" +property in the device tree. + +pci_iommu_extra = pci@<addr1>,<bdf>,<action>,<bdf>,<action>, + pci@<addr2>,<bdf>,<action>,<bdf>,<action>,... + +where: + <addr> is the base register address of the pci controller for which the + subsequent <bdf>,<action> pairs apply + <bdf> identifies to which B.D.F the action applies to + <action> can be: + - "vfs=<number>" to specify that for the PCI EP identified previously by + the <bdf> to include mappings for <number> of VFs. + The variant "noari_vfs=<number>" is available to disable taking ARI into + account. + - "hp" to specify that on this <bdf> there will be a hot-plugged device so + it needs a mapping +The device tree property must be placed under the correct pci controller node +and only the bdf and action pairs need to be specified, like this: + +pci-iommu-extra = "<bdf>,<action>,<bdf>,<action>,..."; + +Note: the env var has priority over the device tree property. + +For example, given this configuration on bus 6: + +=> pci 6 +Scanning PCI devices on bus 6 +BusDevFun VendorId DeviceId Device Class Sub-Class +_____________________________________________________________ +06.00.00 0x8086 0x1572 Network controller 0x00 +06.00.01 0x8086 0x1572 Network controller 0x00 + +The following u-boot env var will create iommu mappings for 3 VFs for each PF: + +=> setenv pci_iommu_extra pci@0x3800000,6.0.0,vfs=3,6.0.1,vfs=3 + +For the device tree case, this would be specified like this: + +pci-iommu-extra = "6.0.0,vfs=3,6.0.1,vfs=3"; + +To add an iommu mapping for a hot-plugged device, please see following example: + +=> setenv pci_iommu_extra pci@0x3800000,2.16.0,hp + +For the device tree case, this would be specified like this: + +pci-iommu-extra = "2.16.0,hp"; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 7400b2c..6d3391d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -437,13 +437,52 @@ __weak void fdt_fixup_ecam(void *blob) } #endif +/* + * If it is a non-E part the crypto is disabled on the following SoCs: + * - LS1043A + * - LS1088A + * - LS2080A + * - LS2088A + * and their personalities. + * + * On all other SoCs just the export-controlled ciphers are disabled, that + * means that the following is still working: + * - hashing (using MDHA - message digest hash accelerator) + * - random number generation (using RNG4) + * - cyclic redundancy checking (using CRCA) + * - runtime integrity checker (RTIC) + * + * The linux driver will figure out what is available and what is not. + * Therefore, we just remove the crypto node on the SoCs which have no crypto + * support at all. + */ +static bool crypto_is_disabled(unsigned int svr) +{ + if (IS_E_PROCESSOR(svr)) + return false; + + if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS1043A))) + return true; + + if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS1088A))) + return true; + + if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS2080A))) + return true; + + if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS2088A))) + return true; + + return false; +} + void ft_cpu_setup(void *blob, struct bd_info *bd) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); unsigned int svr = gur_in32(&gur->svr); /* delete crypto node if not on an E-processor */ - if (!IS_E_PROCESSOR(svr)) + if (crypto_is_disabled(svr)) fdt_fixup_crypto_node(blob, 0); #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 else { diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b195723..d8b0a91 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -424,6 +424,9 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1012a-2g5rdb.dtb \ fsl-ls1012a-frdm.dtb \ fsl-ls1012a-frwy.dtb +dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \ + fsl-ls1028a-kontron-sl28-var3.dtb \ + fsl-ls1028a-kontron-sl28-var4.dtb \ dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi new file mode 100644 index 0000000..2375549 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <config.h> + +/ { + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + i2c0 = &i2c0; + i2c1 = &i2c3; + i2c2 = &i2c4; + rtc0 = &rtc; + ethernet0 = &enetc0; + ethernet1 = &enetc1; + ethernet2 = &enetc2; + ethernet3 = &enetc6; + }; + + binman { + filename = "u-boot.rom"; + pad-byte = <0xff>; + + u-boot-spl { + }; + + fit { + offset = <CONFIG_SPL_PAD_TO>; + description = "FIT image with multiple configurations"; + + images { + uboot { + description = "U-Boot"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <CONFIG_SYS_TEXT_BASE>; + + u-boot-nodtb { + }; + }; + + fdt-1 { + description = "fsl-ls1028a-kontron-sl28"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + + blob { + filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28.dtb"; + }; + }; + + fdt-2 { + description = "fsl-ls1028a-kontron-sl28-var3"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + + blob { + filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dtb"; + }; + }; + + fdt-3 { + description = "fsl-ls1028a-kontron-sl28-var4"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + + blob { + filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dtb"; + }; + }; + }; + + configurations { + default = "conf-1"; + + conf-1 { + description = "fsl-ls1028a-kontron-sl28"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + + conf-2 { + description = "fsl-ls1028a-kontron-sl28-var3"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-2"; + }; + + conf-3 { + description = "fsl-ls1028a-kontron-sl28-var4"; + firmware = "uboot"; + loadables = "uboot"; + fdt = "fdt-3"; + }; + }; + }; + }; +}; + +&i2c0 { + rtc: rtc@32 { + }; +}; + +&fspi { + u-boot,dm-pre-reloc; + flash@0 { + u-boot,dm-pre-reloc; + }; +}; + +&dspi2 { + u-boot,dm-pre-reloc; +}; + +&esdhc0 { + u-boot,dm-pre-reloc; +}; + +&esdhc1 { + u-boot,dm-pre-reloc; +}; + +&serial0 { + u-boot,dm-pre-reloc; +}; + +&sysclk { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi new file mode 100644 index 0000000..79b771e --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi" diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts new file mode 100644 index 0000000..0c8b2af --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + model = "Kontron SMARC-sAL28 (Single PHY)"; + compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi new file mode 100644 index 0000000..79b771e --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi" diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts new file mode 100644 index 0000000..33b1630 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 4 which has two ethernet ports. It + * extends the base and provides one more port connected via RGMII. + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" +#include <dt-bindings/net/qca-ar803x.h> + +/ { + model = "Kontron SMARC-sAL28 (Dual PHY)"; + compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&mdio0 { + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + + vddio-supply = <&vddh>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; +}; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts new file mode 100644 index 0000000..9561a58 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a.dtsi" + +/ { + model = "Kontron SMARC-sAL28"; + compatible = "kontron,sl28", "fsl,ls1028a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &lpuart1; + spi0 = &fspi; + spi1 = &dspi2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dspi2 { + status = "okay"; +}; + +&enetc0 { + phy-handle = <&phy0>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enetc2 { + status = "disabled"; +}; + +&enetc6 { + status = "disabled"; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <133000000>; + reg = <0>; + /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x0f0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x040000>; + label = "failsafe DP firmware"; + read-only; + }; + + partition@140000 { + reg = <0x140000 0x0a0000>; + label = "failsafe trusted firmware"; + read-only; + }; + + partition@1e0000 { + reg = <0x1e0000 0x020000>; + label = "reserved"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x0f0000>; + label = "bootloader"; + }; + + partition@300000 { + reg = <0x300000 0x040000>; + label = "DP firmware"; + }; + + partition@340000 { + reg = <0x340000 0x0a0000>; + label = "trusted firmware"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; + }; +}; + +&i2c0 { + status = "okay"; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&lpuart1 { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index baa9fa8..24a64b7 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -396,7 +396,7 @@ struct ccsr_gur { #define FSL_CHASSIS3_EC2_REGSR 27 #define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK 0x00000003 #define FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT 0 -#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK 0x00000007 +#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK 0x0000000C #define FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT 2 #define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK 0x001F0000 #define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT 16 diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 20c97aa..9c51f50 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -379,6 +379,7 @@ static int set_voltage_to_LTC(int i2caddress, int vdd) { int ret, vdd_last, vdd_target = vdd; int count = 100, temp = 0; + unsigned char value; /* Scale up to the LTC resolution is 1/4096V */ vdd = (vdd * 4096) / 1000; @@ -391,16 +392,51 @@ static int set_voltage_to_LTC(int i2caddress, int vdd) /* Write the desired voltage code to the regulator */ #ifndef CONFIG_DM_I2C + /* Check write protect state */ + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_WRITE_PROTECT, 1, + (void *)&value, sizeof(value)); + if (ret) + goto exit; + + if (value != EN_WRITE_ALL_CMD) { + value = EN_WRITE_ALL_CMD; + ret = i2c_write(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_WRITE_PROTECT, 1, + (void *)&value, sizeof(value)); + if (ret) + goto exit; + } + ret = i2c_write(I2C_VOL_MONITOR_ADDR, - PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5); + PMBUS_CMD_PAGE_PLUS_WRITE, 1, + (void *)&buff, sizeof(buff)); #else struct udevice *dev; ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev); - if (!ret) + if (!ret) { + /* Check write protect state */ + ret = dm_i2c_read(dev, + PMBUS_CMD_WRITE_PROTECT, + (void *)&value, sizeof(value)); + if (ret) + goto exit; + + if (value != EN_WRITE_ALL_CMD) { + value = EN_WRITE_ALL_CMD; + ret = dm_i2c_write(dev, + PMBUS_CMD_WRITE_PROTECT, + (void *)&value, sizeof(value)); + if (ret) + goto exit; + } + ret = dm_i2c_write(dev, PMBUS_CMD_PAGE_PLUS_WRITE, - (void *)&buff, 5); + (void *)&buff, sizeof(buff)); + } #endif +exit: if (ret) { printf("VID: I2C failed to write to the volatge regulator\n"); return -1; @@ -892,7 +928,7 @@ exit: static int print_vdd(void) { - int vdd_last, ret, i2caddress; + int vdd_last, ret, i2caddress = 0; ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR); if (ret) { diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h index 99778e9..65b348e 100644 --- a/board/freescale/common/vid.h +++ b/board/freescale/common/vid.h @@ -18,6 +18,25 @@ /* step the IR regulator in 5mV increments */ #define IR_VDD_STEP_DOWN 5 #define IR_VDD_STEP_UP 5 + +/* LTC3882 */ +#define PMBUS_CMD_WRITE_PROTECT 0x10 +/* + * WRITE_PROTECT command supported values + * 0x80: Disable all writes except WRITE_PROTECT, PAGE, + * STORE_USER_ALL and MFR_EE_UNLOCK commands. + * 0x40: Disable all writes except WRITE_PROTECT, PAGE, STORE_USER_ALL, + * MFR_EE_UNLOCK, OPERATION, CLEAR_PEAKS and CLEAR_FAULTS commands. + * Individual faults can also be cleared by writing a 1 to the + * respective status bit. + * 0x20: Disable all writes except WRITE_PROTECT, PAGE, STORE_USER_ ALL, + * MFR_EE_UNLOCK, OPERATION, CLEAR_PEAKS, CLEAR_FAULTS, ON_OFF_CONFIG + * and VOUT_COMMAND commands. Individual faults can be cleared by + * writing a 1 to the respective status bit. + * 0x00: Enables write to all commands + */ +#define EN_WRITE_ALL_CMD (0) + int adjust_vdd(ulong vdd_override); #endif /* __VID_H_ */ diff --git a/board/kontron/sl28/Kconfig b/board/kontron/sl28/Kconfig new file mode 100644 index 0000000..cdec39b --- /dev/null +++ b/board/kontron/sl28/Kconfig @@ -0,0 +1,18 @@ +if TARGET_SL28 + +config SYS_BOARD + default "sl28" + +config SYS_VENDOR + default "kontron" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "kontron_sl28" + +config SYS_TEXT_BASE + default 0x96000000 + +endif diff --git a/board/kontron/sl28/MAINTAINERS b/board/kontron/sl28/MAINTAINERS new file mode 100644 index 0000000..a7b0fbb --- /dev/null +++ b/board/kontron/sl28/MAINTAINERS @@ -0,0 +1,7 @@ +Kontron SMARC-sAL28 board +M: Michael Walle <michael@walle.cc> +S: Maintained +F: arch/arm/dts/fsl-ls1028a-kontron-sl28-* +F: board/kontron/sl28/ +F: configs/kontron_sl28_defconfig +F: include/configs/kontron_sl28.h diff --git a/board/kontron/sl28/Makefile b/board/kontron/sl28/Makefile new file mode 100644 index 0000000..74d8012 --- /dev/null +++ b/board/kontron/sl28/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ + +ifndef CONFIG_SPL_BUILD +obj-y += sl28.o cmds.o +endif + +obj-y += common.o ddr.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/board/kontron/sl28/cmds.c b/board/kontron/sl28/cmds.c new file mode 100644 index 0000000..046d3b4 --- /dev/null +++ b/board/kontron/sl28/cmds.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * sl28 extension commands + * + * Copyright (c) 2020 Kontron Europe GmbH + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <linux/delay.h> + +#define CPLD_I2C_ADDR 0x4a +#define REG_UFM_CTRL 0x02 +#define UFM_CTRL_DCLK BIT(1) +#define UFM_CTRL_DIN BIT(2) +#define UFM_CTRL_PROGRAM BIT(3) +#define UFM_CTRL_ERASE BIT(4) +#define UFM_CTRL_DSHIFT BIT(5) +#define UFM_CTRL_DOUT BIT(6) +#define UFM_CTRL_BUSY BIT(7) + +static int ufm_shift_data(struct udevice *dev, u16 data_in, u16 *data_out) +{ + int i; + int ret; + u16 data = 0; + + /* latch data */ + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, 0); + if (ret < 0) + return ret; + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, UFM_CTRL_DCLK); + if (ret < 0) + return ret; + + /* assert drshift */ + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, + UFM_CTRL_DSHIFT | UFM_CTRL_DCLK); + if (ret < 0) + return ret; + + /* clock 16 data bits, reverse order */ + for (i = 15; i >= 0; i--) { + u8 din = (data_in & (1 << i)) ? UFM_CTRL_DIN : 0; + + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, UFM_CTRL_DSHIFT + | din); + if (ret < 0) + return ret; + if (data_out) { + ret = dm_i2c_reg_read(dev, REG_UFM_CTRL); + if (ret < 0) + return ret; + if (ret & UFM_CTRL_DOUT) + data |= (1 << i); + } + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, + UFM_CTRL_DSHIFT | UFM_CTRL_DCLK | din); + if (ret < 0) + return ret; + } + + /* deassert drshift */ + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, UFM_CTRL_DCLK); + if (ret < 0) + return ret; + + if (data_out) + *data_out = data; + + return ret; +} + +static int ufm_erase(struct udevice *dev) +{ + int ret; + + /* erase, tEPMX is 500ms */ + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, + UFM_CTRL_DCLK | UFM_CTRL_ERASE); + if (ret < 0) + return ret; + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, UFM_CTRL_DCLK); + if (ret < 0) + return ret; + mdelay(500); + + return 0; +} + +static int ufm_program(struct udevice *dev) +{ + int ret; + + /* program, tPPMX is 100us */ + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, + UFM_CTRL_DCLK | UFM_CTRL_PROGRAM); + if (ret < 0) + return ret; + ret = dm_i2c_reg_write(dev, REG_UFM_CTRL, UFM_CTRL_DCLK); + if (ret < 0) + return ret; + udelay(100); + + return 0; +} + +static int ufm_write(struct udevice *dev, u16 data) +{ + int ret; + + ret = ufm_shift_data(dev, data, NULL); + if (ret < 0) + return ret; + + ret = ufm_erase(dev); + if (ret < 0) + return ret; + + return ufm_program(dev); +} + +static int ufm_read(struct udevice *dev, u16 *data) +{ + return ufm_shift_data(dev, 0, data); +} + +static int do_sl28_nvm(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + struct udevice *dev; + u16 nvm; + int ret; + char *endp; + + if (i2c_get_chip_for_busnum(0, CPLD_I2C_ADDR, 1, &dev)) + return CMD_RET_FAILURE; + + if (argc > 1) { + nvm = simple_strtoul(argv[1], &endp, 16); + if (*endp != '\0') { + printf("ERROR: argument is not a valid number\n"); + ret = -EINVAL; + goto out; + } + + /* + * We swap all bits, because the a zero bit in hardware means the + * feature is enabled. But this is hard for the user. + */ + nvm ^= 0xffff; + + ret = ufm_write(dev, nvm); + if (ret) + goto out; + printf("New settings will be activated after the next power cycle!\n"); + } else { + ret = ufm_read(dev, &nvm); + if (ret) + goto out; + nvm ^= 0xffff; + + printf("%04hx\n", nvm); + } + + return CMD_RET_SUCCESS; + +out: + printf("command failed (%d)\n", ret); + return CMD_RET_FAILURE; +} + +static char sl28_help_text[] = + "nvm [<hex>] - display/set the 16 non-volatile bits\n"; + +U_BOOT_CMD_WITH_SUBCMDS(sl28, "SMARC-sAL28 specific", sl28_help_text, + U_BOOT_SUBCMD_MKENT(nvm, 2, 1, do_sl28_nvm)); diff --git a/board/kontron/sl28/common.c b/board/kontron/sl28/common.c new file mode 100644 index 0000000..14704f7 --- /dev/null +++ b/board/kontron/sl28/common.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/arch-fsl-layerscape/soc.h> + +int board_early_init_f(void) +{ + fsl_lsch3_early_init_f(); + return 0; +} diff --git a/board/kontron/sl28/ddr.c b/board/kontron/sl28/ddr.c new file mode 100644 index 0000000..d111b6d --- /dev/null +++ b/board/kontron/sl28/ddr.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/io.h> +#include <fsl_ddr_sdram.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DCFG_GPPORCR1 0x20 + +#define GPPORCR1_MEM_MASK (0x7 << 5) +#define GPPORCR1_MEM_512MB_CS0 (0x0 << 5) +#define GPPORCR1_MEM_1GB_CS0 (0x1 << 5) +#define GPPORCR1_MEM_2GB_CS0 (0x2 << 5) +#define GPPORCR1_MEM_4GB_CS0_1 (0x3 << 5) +#define GPPORCR1_MEM_4GB_CS0_2 (0x4 << 5) +#define GPPORCR1_MEM_8GB_CS0_1_2_3 (0x5 << 5) +#define GPPORCR1_MEM_8GB_CS0_1 (0x6 << 5) + +static fsl_ddr_cfg_regs_t __maybe_unused ddr_cfg_regs = { + .cs[0].bnds = 0x0000007f, + .cs[0].config = 0x80044402, + .cs[1].bnds = 0x008000ff, + .cs[1].config = 0x80004402, + + .timing_cfg_0 = 0x9011010c, + .timing_cfg_3 = 0x010c1000, + .timing_cfg_1 = 0xbcb48c66, + .timing_cfg_2 = 0x0fc0d118, + .ddr_sdram_cfg = 0xe70c000c, + .ddr_sdram_cfg_2 = 0x24401111, + .ddr_sdram_mode = 0x00441c70, + .ddr_sdram_mode_3 = 0x00001c70, + .ddr_sdram_mode_5 = 0x00001c70, + .ddr_sdram_mode_7 = 0x00001c70, + .ddr_sdram_mode_2 = 0x00180000, + .ddr_sdram_mode_4 = 0x00180000, + .ddr_sdram_mode_6 = 0x00180000, + .ddr_sdram_mode_8 = 0x00180000, + + .ddr_sdram_interval = 0x0c30030c, + .ddr_data_init = 0xdeadbeef, + + .ddr_sdram_clk_cntl = 0x02400000, + + .timing_cfg_4 = 0x00000001, + .timing_cfg_5 = 0x04401400, + + .ddr_zq_cntl = 0x89080600, + .ddr_wrlvl_cntl = 0x8675f606, + .ddr_wrlvl_cntl_2 = 0x04080700, + .ddr_wrlvl_cntl_3 = 0x00000009, + + .ddr_cdr1 = 0x80040000, + .ddr_cdr2 = 0x0000bc01, +}; + +int fsl_initdram(void) +{ + u32 gpporcr1 = in_le32(DCFG_BASE + DCFG_GPPORCR1); + phys_size_t dram_size; + + switch (gpporcr1 & GPPORCR1_MEM_MASK) { + case GPPORCR1_MEM_2GB_CS0: + dram_size = 0x80000000; + ddr_cfg_regs.cs[1].bnds = 0; + ddr_cfg_regs.cs[1].config = 0; + ddr_cfg_regs.cs[1].config_2 = 0; + break; + case GPPORCR1_MEM_4GB_CS0_1: + dram_size = 0x100000000ULL; + break; + case GPPORCR1_MEM_512MB_CS0: + dram_size = 0x20000000; + fallthrough; /* for now */ + case GPPORCR1_MEM_1GB_CS0: + dram_size = 0x40000000; + fallthrough; /* for now */ + case GPPORCR1_MEM_4GB_CS0_2: + dram_size = 0x100000000ULL; + fallthrough; /* for now */ + case GPPORCR1_MEM_8GB_CS0_1: + case GPPORCR1_MEM_8GB_CS0_1_2_3: + dram_size = 0x200000000ULL; + fallthrough; /* for now */ + default: + panic("Unsupported memory configuration (%08x)\n", + gpporcr1 & GPPORCR1_MEM_MASK); + break; + } + + if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); + + gd->ram_size = dram_size; + + return 0; +} diff --git a/board/kontron/sl28/sl28.c b/board/kontron/sl28/sl28.c new file mode 100644 index 0000000..b18127c --- /dev/null +++ b/board/kontron/sl28/sl28.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <fsl_ddr.h> +#include <fdt_support.h> +#include <linux/libfdt.h> +#include <env_internal.h> +#include <asm/arch-fsl-layerscape/soc.h> +#include <asm/arch-fsl-layerscape/fsl_icid.h> +#include <i2c.h> +#include <asm/arch/soc.h> +#include <fsl_immap.h> +#include <netdev.h> + +#include <fdtdec.h> +#include <miiphy.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + if (CONFIG_IS_ENABLED(FSL_CAAM)) + sec_init(); + + return 0; +} + +int board_eth_init(struct bd_info *bis) +{ + return pci_eth_init(bis); +} + +int checkboard(void) +{ + printf("EL: %d\n", current_el()); + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + int nbanks = CONFIG_NR_DRAM_BANKS; + int i; + + ft_cpu_setup(blob, bd); + + /* fixup DT for the two GPP DDR banks */ + for (i = 0; i < nbanks; i++) { + base[i] = gd->bd->bi_dram[i].start; + size[i] = gd->bd->bi_dram[i].size; + } + + fdt_fixup_memory_banks(blob, base, size, nbanks); + + fdt_fixup_icid(blob); + + return 0; +} diff --git a/board/kontron/sl28/spl.c b/board/kontron/sl28/spl.c new file mode 100644 index 0000000..fa5829e --- /dev/null +++ b/board/kontron/sl28/spl.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/io.h> +#include <asm/spl.h> + +#define DCFG_RCWSR25 0x160 +#define GPINFO_HW_VARIANT_MASK 0xff + +int sl28_variant(void) +{ + return in_le32(DCFG_BASE + DCFG_RCWSR25) & GPINFO_HW_VARIANT_MASK; +} + +int board_fit_config_name_match(const char *name) +{ + int variant = sl28_variant(); + + switch (variant) { + case 3: + return strcmp(name, "fsl-ls1028a-kontron-sl28-var3"); + case 4: + return strcmp(name, "fsl-ls1028a-kontron-sl28-var4"); + default: + return strcmp(name, "fsl-ls1028a-kontron-sl28"); + } +} + +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = BOOT_DEVICE_SPI; +} diff --git a/cmd/Kconfig b/cmd/Kconfig index 58864f6..9f36290 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1074,6 +1074,14 @@ config CMD_CLONE initial flashing by external block device without network or usb support. +config CMD_OPTEE_RPMB + bool "Enable read/write support on RPMB via OPTEE" + depends on SUPPORT_EMMC_RPMB && OPTEE + help + Enable the commands for reading, writing persistent named values + in the Replay Protection Memory Block partition in eMMC by + using Persistent Objects in OPTEE + config CMD_MTD bool "mtd" depends on MTD diff --git a/cmd/Makefile b/cmd/Makefile index 0cbee6c..dd86675 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_CMD_MISC) += misc.o obj-$(CONFIG_CMD_MDIO) += mdio.o obj-$(CONFIG_CMD_SLEEP) += sleep.o obj-$(CONFIG_CMD_MMC) += mmc.o +obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_CMD_MTD) += mtd.o obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o diff --git a/cmd/optee_rpmb.c b/cmd/optee_rpmb.c new file mode 100644 index 0000000..0d6b1cb --- /dev/null +++ b/cmd/optee_rpmb.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +#include <command.h> +#include <common.h> +#include <env.h> +#include <errno.h> +#include <image.h> +#include <malloc.h> +#include <mmc.h> +#include <tee.h> +#include <tee/optee_ta_avb.h> + +static struct udevice *tee; +static u32 session; + +static int avb_ta_open_session(void) +{ + const struct tee_optee_ta_uuid uuid = TA_AVB_UUID; + struct tee_open_session_arg arg; + int rc; + + tee = tee_find_device(tee, NULL, NULL, NULL); + if (!tee) + return -ENODEV; + + memset(&arg, 0, sizeof(arg)); + tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); + rc = tee_open_session(tee, &arg, 0, NULL); + if (!rc) + session = arg.session; + + return 0; +} + +static int invoke_func(u32 func, ulong num_param, struct tee_param *param) +{ + struct tee_invoke_arg arg; + + if (!tee) + if (avb_ta_open_session()) + return -ENODEV; + + memset(&arg, 0, sizeof(arg)); + arg.func = func; + arg.session = session; + + if (tee_invoke_func(tee, &arg, num_param, param)) + return -EFAULT; + switch (arg.ret) { + case TEE_SUCCESS: + return 0; + case TEE_ERROR_OUT_OF_MEMORY: + case TEE_ERROR_STORAGE_NO_SPACE: + return -ENOSPC; + case TEE_ERROR_ITEM_NOT_FOUND: + return -EIO; + case TEE_ERROR_TARGET_DEAD: + /* + * The TA has paniced, close the session to reload the TA + * for the next request. + */ + tee_close_session(tee, session); + tee = NULL; + return -EIO; + default: + return -EIO; + } +} + +static int read_persistent_value(const char *name, + size_t buffer_size, + u8 *out_buffer, + size_t *out_num_bytes_read) +{ + int rc = 0; + struct tee_shm *shm_name; + struct tee_shm *shm_buf; + struct tee_param param[2]; + size_t name_size = strlen(name) + 1; + + if (!tee) + if (avb_ta_open_session()) + return -ENODEV; + + rc = tee_shm_alloc(tee, name_size, + TEE_SHM_ALLOC, &shm_name); + if (rc) + return -ENOMEM; + + rc = tee_shm_alloc(tee, buffer_size, + TEE_SHM_ALLOC, &shm_buf); + if (rc) { + rc = -ENOMEM; + goto free_name; + } + + memcpy(shm_name->addr, name, name_size); + + memset(param, 0, sizeof(param)); + param[0].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT; + param[0].u.memref.shm = shm_name; + param[0].u.memref.size = name_size; + param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT; + param[1].u.memref.shm = shm_buf; + param[1].u.memref.size = buffer_size; + + rc = invoke_func(TA_AVB_CMD_READ_PERSIST_VALUE, + 2, param); + if (rc) + goto out; + + if (param[1].u.memref.size > buffer_size) { + rc = -EINVAL; + goto out; + } + + *out_num_bytes_read = param[1].u.memref.size; + + memcpy(out_buffer, shm_buf->addr, *out_num_bytes_read); + +out: + tee_shm_free(shm_buf); +free_name: + tee_shm_free(shm_name); + + return rc; +} + +static int write_persistent_value(const char *name, + size_t value_size, + const u8 *value) +{ + int rc = 0; + struct tee_shm *shm_name; + struct tee_shm *shm_buf; + struct tee_param param[2]; + size_t name_size = strlen(name) + 1; + + if (!tee) { + if (avb_ta_open_session()) + return -ENODEV; + } + if (!value_size) + return -EINVAL; + + rc = tee_shm_alloc(tee, name_size, + TEE_SHM_ALLOC, &shm_name); + if (rc) + return -ENOMEM; + + rc = tee_shm_alloc(tee, value_size, + TEE_SHM_ALLOC, &shm_buf); + if (rc) { + rc = -ENOMEM; + goto free_name; + } + + memcpy(shm_name->addr, name, name_size); + memcpy(shm_buf->addr, value, value_size); + + memset(param, 0, sizeof(param)); + param[0].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT; + param[0].u.memref.shm = shm_name; + param[0].u.memref.size = name_size; + param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT; + param[1].u.memref.shm = shm_buf; + param[1].u.memref.size = value_size; + + rc = invoke_func(TA_AVB_CMD_WRITE_PERSIST_VALUE, + 2, param); + if (rc) + goto out; + +out: + tee_shm_free(shm_buf); +free_name: + tee_shm_free(shm_name); + + return rc; +} + +int do_optee_rpmb_read(struct cmd_tbl *cmdtp, int flag, int argc, + char * const argv[]) +{ + const char *name; + size_t bytes; + size_t bytes_read; + void *buffer; + char *endp; + + if (argc != 3) + return CMD_RET_USAGE; + + name = argv[1]; + bytes = simple_strtoul(argv[2], &endp, 10); + if (*endp && *endp != '\n') + return CMD_RET_USAGE; + + buffer = malloc(bytes); + if (!buffer) + return CMD_RET_FAILURE; + + if (read_persistent_value(name, bytes, buffer, &bytes_read) == 0) { + printf("Read %zu bytes, value = %s\n", bytes_read, + (char *)buffer); + free(buffer); + return CMD_RET_SUCCESS; + } + + printf("Failed to read persistent value\n"); + + free(buffer); + + return CMD_RET_FAILURE; +} + +int do_optee_rpmb_write(struct cmd_tbl *cmdtp, int flag, int argc, + char * const argv[]) +{ + const char *name; + const char *value; + + if (argc != 3) + return CMD_RET_USAGE; + + name = argv[1]; + value = argv[2]; + + if (write_persistent_value(name, strlen(value) + 1, + (const uint8_t *)value) == 0) { + printf("Wrote %zu bytes\n", strlen(value) + 1); + return CMD_RET_SUCCESS; + } + + printf("Failed to write persistent value\n"); + + return CMD_RET_FAILURE; +} + +static struct cmd_tbl cmd_optee_rpmb[] = { + U_BOOT_CMD_MKENT(read_pvalue, 3, 0, do_optee_rpmb_read, "", ""), + U_BOOT_CMD_MKENT(write_pvalue, 3, 0, do_optee_rpmb_write, "", ""), +}; + +static int do_optee_rpmb(struct cmd_tbl *cmdtp, int flag, int argc, + char * const argv[]) +{ + struct cmd_tbl *cp; + + cp = find_cmd_tbl(argv[1], cmd_optee_rpmb, ARRAY_SIZE(cmd_optee_rpmb)); + + argc--; + argv++; + + if (!cp || argc > cp->maxargs) + return CMD_RET_USAGE; + + if (flag == CMD_FLAG_REPEAT) + return CMD_RET_FAILURE; + + return cp->cmd(cmdtp, flag, argc, argv); +} + +U_BOOT_CMD ( + optee_rpmb, 29, 0, do_optee_rpmb, + "Provides commands for testing secure storage on RPMB on OPTEE", + "read_pvalue <name> <bytes> - read a persistent value <name>\n" + "optee_rpmb write_pvalue <name> <value> - write a persistent value <name>\n" + ); diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig new file mode 100644 index 0000000..c1a0967 --- /dev/null +++ b/configs/kontron_sl28_defconfig @@ -0,0 +1,107 @@ +CONFIG_ARM=y +CONFIG_TARGET_SL28=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x3e0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000 +CONFIG_DM_GPIO=y +CONFIG_SPL_DM_SPI=y +CONFIG_SPL_TEXT_BASE=0x18010000 +CONFIG_SYS_FSL_SDHC_CLK_DIV=1 +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SIZE_LIMIT=0x20000 +CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 +CONFIG_SPL=y +CONFIG_ENV_OFFSET_REDUND=0x3f0000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +# CONFIG_PSCI_RESET is not set +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28" +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_PCI_INIT_R=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_SPL_DM_SPI_FLASH=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_RNG=y +CONFIG_MP=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIST="" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_FSL_CAAM=y +CONFIG_SYS_FSL_DDR3=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0 +CONFIG_I2C_MUX=y +CONFIG_DM_MMC=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_ESDHC=y +CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_FSL_ENETC=y +CONFIG_NVME=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_ECAM_GENERIC=y +CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_DM_RNG=y +CONFIG_DM_RTC=y +CONFIG_RTC_RV8803=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_NXP_FSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 1af77dc..6a95dd5 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -61,3 +61,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig index a94887d..95fdc0f 100644 --- a/configs/ls1012afrdm_tfa_defconfig +++ b/configs/ls1012afrdm_tfa_defconfig @@ -61,3 +61,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index 78e1f66..f73b791 100644 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -62,3 +62,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig index bdd4dbe..5740a1f 100644 --- a/configs/ls1012afrwy_qspi_defconfig +++ b/configs/ls1012afrwy_qspi_defconfig @@ -63,3 +63,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index 5a58f7c..be8c9fd 100644 --- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -62,3 +62,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig index 7a15c8f..cdb8bf5 100644 --- a/configs/ls1012afrwy_tfa_defconfig +++ b/configs/ls1012afrwy_tfa_defconfig @@ -68,3 +68,5 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 1e8e311..9fdaf79 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -84,3 +84,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig index dc405c7..3216e18 100644 --- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig @@ -75,3 +75,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index bf03216..829eb2f 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -84,3 +84,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index 552364a..40f37cc 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -66,3 +66,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index f500479..99e80d6 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -68,3 +68,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index cf43243..d8d2cfa 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -67,3 +67,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index 1bcf80c..705ed2f 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -67,3 +67,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index 78c4d61..b258217 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -55,3 +55,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index bb4b9dd..bb06319 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -60,3 +60,5 @@ CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index b6ac523..7585f2b 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -73,3 +73,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 1bb657d..0f45df1 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -73,3 +73,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index f0d49ba..1cd6696 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -88,3 +88,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 0ba4124..f136cb1 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -72,3 +72,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index da2a761..e20fcf5 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -74,3 +74,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index d3d8fcb..52bdb8d 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -74,3 +74,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 08b9ec2..b68041d 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -73,3 +73,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index ef194df..431d53f 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -87,3 +87,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index e64cb38..ba9d499 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -85,3 +85,5 @@ CONFIG_USB_STORAGE=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig index 43f9e51..e060f14 100644 --- a/configs/ls1021atsn_qspi_defconfig +++ b/configs/ls1021atsn_qspi_defconfig @@ -61,3 +61,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig index 49197ee..c611995 100644 --- a/configs/ls1021atsn_sdcard_defconfig +++ b/configs/ls1021atsn_sdcard_defconfig @@ -72,3 +72,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index df99a75..3828d6d 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -66,3 +66,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index a71f7b3..c91fa0b 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -68,3 +68,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index d24b368..b59ec99 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -69,3 +69,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 2b11730..e8e1aa3 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -71,3 +71,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 70154bc..2b4ebef 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -80,3 +80,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index af2b5aa..fccdc72 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -81,3 +81,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index dd80eb4..9611349 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -82,3 +82,5 @@ CONFIG_USB_XHCI_DWC3=y # CONFIG_VIDEO_FSL_DCU_FB is not set # CONFIG_VIDEO is not set # CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 1dc9d31..c31bb06 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -84,3 +84,5 @@ CONFIG_WDT_SP805=y CONFIG_RSA=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index bf9fee9..374eacb 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -89,3 +89,5 @@ CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 3fccd4b..3f58f17 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -91,3 +91,5 @@ CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 5257080..11e61d9 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -81,3 +81,5 @@ CONFIG_WDT_SP805=y CONFIG_RSA=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 9435e70..9ccbb7a 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -90,3 +90,5 @@ CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index 4846ddd..e839e5f 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -68,3 +68,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index 6d8b6f3..86692bb 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -70,3 +70,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index 98a9af5..9185c8c 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -84,3 +84,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index 87651a7..fd84464 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -69,3 +69,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 2e2d4db..ec1b10e 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -65,3 +65,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index ca825d7..e814935 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -85,3 +85,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index 3b24e19..2c3923d 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -79,3 +79,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 1aa657a..d89ca73 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -71,3 +71,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index d306773..2b1d958 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -78,3 +78,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index bd723a5..3e94602 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -61,3 +61,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index 59e88fd..63f1bb8 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -61,3 +61,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index a535109..da1861d 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -81,3 +81,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 9a43ea8..fbc57c7 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -80,3 +80,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y # CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 34cbd24..903c4bb 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -81,3 +81,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index cf5b597..54a7d22 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -80,3 +80,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y # CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index aac3175..b719444 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -62,3 +62,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index d15869f..6da10c3 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -65,3 +65,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index 2d76b35..1f70bc6 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -68,3 +68,5 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index 26b42fa..0e18f14 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -69,3 +69,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index dfa1882..d759681 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -71,3 +71,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index f37cdf7..de21e30 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -73,3 +73,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 5256f30..a65760d 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -79,3 +79,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index 466d7ca..b479988 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -69,3 +69,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index 959b8ff..9f99cce 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -89,3 +89,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 527eb08..34a6d0b1 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -84,3 +84,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index 6860e48..14fbcc1 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -71,3 +71,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index f481add..8730315 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -81,3 +81,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index cd0ba8f..9ec38c8 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -81,3 +81,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index d7ee89c..3e168a4 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -64,3 +64,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index 481c42c..876b775 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -67,3 +67,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 3270286..398faa8 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -86,3 +86,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_SPL_GZIP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index 525caa6..c353c03 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -78,3 +78,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index d5e519f..f431b09 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -80,3 +80,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig index 6ef4e24..7190c65 100644 --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig @@ -63,3 +63,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig index d123a8d..711e21f 100644 --- a/configs/ls1046ardb_tfa_defconfig +++ b/configs/ls1046ardb_tfa_defconfig @@ -68,3 +68,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index 9642de2..ddc4ed8 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -72,3 +72,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index 0d35e91..d4b9f58 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -74,3 +73,5 @@ CONFIG_USB_GADGET=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index fcb7678..6c089e4 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -75,3 +74,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 1f8398c..99a5130 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -80,3 +80,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index 6558c16..da14230 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -42,7 +42,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -84,3 +83,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index 582cd85..07b385f 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -100,3 +99,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 40f66fa..b698d76 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -33,7 +33,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -76,3 +75,5 @@ CONFIG_USB_GADGET=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index d7ecff2..a9d29f6 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -77,3 +76,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index ffc4588..db6c59c 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -45,7 +45,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -85,3 +84,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 6adfadf..cd07f9e 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -44,7 +44,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -86,3 +85,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 7677159..f4eee9e 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -86,3 +85,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index c6c860c..cacbe40 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -37,7 +37,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MDIO is not set CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y @@ -92,3 +91,5 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index bb421db..fc23823 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -68,3 +68,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index 76ee054..0010bb8 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -69,3 +69,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index abc16a2..217e982 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -76,3 +76,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index 2604ac2..08a7bd2 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -68,3 +68,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index 908a548..ed3bfe2 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -75,3 +75,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index 4341e61..231d420 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -66,3 +66,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 4cf27d1..1d7559c 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -67,3 +67,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 19436bd..8f933d9 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -72,3 +72,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index 39e5d7d..a76e780 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -65,3 +65,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig index 6127e98..bde3755 100644 --- a/configs/ls2088aqds_tfa_defconfig +++ b/configs/ls2088aqds_tfa_defconfig @@ -89,3 +89,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index d3f8d53..30984f4 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -65,3 +65,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index 972e7f8..129aa2a 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -70,3 +70,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index c5da5a3..5916299 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -82,3 +82,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index faecc7b..1fe0c1f 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -87,3 +87,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig index 461d719d..1be2231 100644 --- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig @@ -84,3 +84,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig index 6dde093..a6ac66d 100644 --- a/configs/lx2160aqds_tfa_defconfig +++ b/configs/lx2160aqds_tfa_defconfig @@ -90,3 +90,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SBSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index 159ae9d..d339ab2 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -75,3 +75,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index 8a4e6ef..81bbebd 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -81,3 +81,10 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SBSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y +CONFIG_TEE=y +CONFIG_OPTEE=y +CONFIG_OPTEE_TA_AVB=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_CMD_OPTEE_RPMB=y diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig index bd9c1e9..69eb4db 100644 --- a/configs/lx2160ardb_tfa_stmm_defconfig +++ b/configs/lx2160ardb_tfa_stmm_defconfig @@ -84,3 +84,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_MM_COMM_TEE=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_CMD_NVME=y +CONFIG_NVME=y diff --git a/doc/board/index.rst b/doc/board/index.rst index 63935ab..4b6a996 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -15,6 +15,7 @@ Board-specific doc freescale/index google/index intel/index + kontron/index renesas/index rockchip/index sifive/index diff --git a/doc/board/kontron/index.rst b/doc/board/kontron/index.rst new file mode 100644 index 0000000..543b22e --- /dev/null +++ b/doc/board/kontron/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Kontron +======= + +.. toctree:: + :maxdepth: 2 + + sl28 diff --git a/doc/board/kontron/sl28.rst b/doc/board/kontron/sl28.rst new file mode 100644 index 0000000..e458fbc --- /dev/null +++ b/doc/board/kontron/sl28.rst @@ -0,0 +1,160 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Summary +======= + +The Kontron SMARC-sAL28 board is a TSN-enabled dual-core ARM A72 +processor module with an on-chip 6-port TSN switch and a 3D GPU. + + +Quickstart +========== + +Compile U-Boot +-------------- + +Configure and compile the binary:: + + $ make kontron_sl28_defconfig + $ CROSS_COMPILE=aarch64-linux-gnu make + +Copy u-boot.rom to a TFTP server. + +Install the bootloader on the board +----------------------------------- + +Please note, this bootloader doesn't support the builtin watchdog (yet), +therefore you have to disable it, see below. Otherwise you'll end up in +the failsafe bootloader on every reset:: + + > tftp path/to/u-boot.rom + > sf probe 0 + > sf update $fileaddr 0x210000 $filesize + +The board is fully failsafe, you can't break anything. But because you've +disabled the builtin watchdog you might have to manually enter failsafe +mode by asserting the ``FORCE_RECOV#`` line during board reset. + +Disable the builtin watchdog +---------------------------- + +- boot into the failsafe bootloader, either by asserting the + ``FORCE_RECOV#`` line or if you still have the original bootloader + installed you can use the command:: + + > wdt dev cpld_watchdog@4a; wdt expire 1 + +- in the failsafe bootloader use the "sl28 nvm" command to disable + the automatic start of the builtin watchdog:: + + > sl28 nvm 0008 + +- power-cycle the board + + +Useful I2C tricks +================= + +The board has a board management controller which is not supported in +u-boot (yet). But you can use the i2c command to access it. + +- reset into failsafe bootloader:: + + > i2c mw 4a 5.1 0; i2c mw 4a 6.1 6b; i2c mw 4a 4.1 42 + +- read board management controller version:: + + > i2c md 4a 3.1 1 + + +Non-volatile Board Configuration Bits +===================================== + +The board has 16 configuration bits which are stored in the CPLD and are +non-volatile. These can be changed by the `sl28 nvm` command. + +=== =============================================================== +Bit Description +=== =============================================================== + 0 Power-on inhibit + 1 Enable eMMC boot + 2 Enable watchdog by default + 3 Disable failsafe watchdog by default + 4 Clock generator selection bit 0 + 5 Clock generator selection bit 1 + 6 Disable CPU SerDes clock #2 and PCIe-A clock output + 7 Disable PCIe-B and PCIe-C clock output + 8 Keep onboard PHYs in reset + 9 Keep USB hub in reset + 10 Keep eDP-to-LVDS converter in reset + 11 Enable I2C stuck recovery on I2C PM and I2C GP busses + 12 Enable automatic onboard PHY H/W reset + 13 reserved + 14 Used by the RCW to determine boot source + 15 Used by the RCW to determine boot source +=== =============================================================== + +Please note, that if the board is in failsafe mode, the bits will have the +factory defaults, ie. all bits are off. + +Power-On Inhibit +---------------- + +If this is set, the board doesn't automatically turn on when power is +applied. Instead, the user has to either toggle the ``PWR_BTN#`` line or +use any other wake-up source such as RTC alarm or Wake-on-LAN. + +eMMC Boot +--------- + +If this is set, the RCW will be fetched from the on-board eMMC at offset +1MiB. For further details, have a look at the `Reset Configuration Word +Documentation`_. + +Watchdog +-------- + +By default, the CPLD watchdog is enabled in failsafe mode. Using bits 2 and +3, the user can change its mode or disable it altogether. + +===== ===== =============================== +Bit 2 Bit 3 Description +===== ===== =============================== + 0 0 Watchdog enabled, failsafe mode + 0 1 Watchdog disabled + 1 0 Watchdog enabled, failsafe mode + 1 1 Watchdog enabled, normal mode +===== ===== =============================== + +Clock Generator Select +---------------------- + +The board is prepared to supply different SerDes clock speeds. But for now, +only setting 0 is supported, otherwise the CPU will hang because the PLL +will not lock. + +Clock Output Disable And Keep Devices In Reset +---------------------------------------------- + +To safe power, the user might disable different devices and clock output of +the board. It is not supported to disable the "CPU SerDes clock #2" for +now, otherwise the CPU will hang because the PLL will not lock. + +Automatic reset of the onboard PHYs +----------------------------------- + +By default, there is no hardware reset of the onboard PHY. This is because +for Wake-on-LAN, some registers have to retain their values. If you don't +use the WOL feature and a soft reset of the PHY is not enough you can +enable the hardware reset. The onboard PHY hardware reset follows the +power-on reset. + + +Further documentation +===================== + +- `Vendor Documentation`_ +- `Reset Configuration Word Documentation`_ + +.. _Reset Configuration Word Documentation: https://raw.githubusercontent.com/kontron/rcw-smarc-sal28/master/README.md +.. _Vendor Documentation: https://raw.githubusercontent.com/kontron/u-boot-smarc-sal28/master/board/kontron/sl28/README.md diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c index 1dfd225..27881a7 100644 --- a/drivers/gpio/mpc8xxx_gpio.c +++ b/drivers/gpio/mpc8xxx_gpio.c @@ -6,12 +6,15 @@ * based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is * * Copyright 2010 eXMeritus, A Boeing Company + * Copyright 2020 NXP */ #include <common.h> #include <dm.h> #include <mapmem.h> #include <asm/gpio.h> +#include <asm/io.h> +#include <dm/of_access.h> struct ccsr_gpio { u32 gpdir; @@ -20,6 +23,7 @@ struct ccsr_gpio { u32 gpier; u32 gpimr; u32 gpicr; + u32 gpibe; }; struct mpc8xxx_gpio_data { @@ -35,6 +39,7 @@ struct mpc8xxx_gpio_data { */ u32 dat_shadow; ulong type; + bool little_endian; }; enum { @@ -47,33 +52,56 @@ inline u32 gpio_mask(uint gpio) return (1U << (31 - (gpio))); } -static inline u32 mpc8xxx_gpio_get_val(struct ccsr_gpio *base, u32 mask) +static inline u32 mpc8xxx_gpio_get_val(struct udevice *dev, u32 mask) { - return in_be32(&base->gpdat) & mask; + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); + + if (data->little_endian) + return in_le32(&data->base->gpdat) & mask; + else + return in_be32(&data->base->gpdat) & mask; } -static inline u32 mpc8xxx_gpio_get_dir(struct ccsr_gpio *base, u32 mask) +static inline u32 mpc8xxx_gpio_get_dir(struct udevice *dev, u32 mask) { - return in_be32(&base->gpdir) & mask; + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); + + if (data->little_endian) + return in_le32(&data->base->gpdir) & mask; + else + return in_be32(&data->base->gpdir) & mask; } -static inline int mpc8xxx_gpio_open_drain_val(struct ccsr_gpio *base, u32 mask) +static inline int mpc8xxx_gpio_open_drain_val(struct udevice *dev, u32 mask) { - return in_be32(&base->gpodr) & mask; + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); + + if (data->little_endian) + return in_le32(&data->base->gpodr) & mask; + else + return in_be32(&data->base->gpodr) & mask; } -static inline void mpc8xxx_gpio_open_drain_on(struct ccsr_gpio *base, u32 +static inline void mpc8xxx_gpio_open_drain_on(struct udevice *dev, u32 gpios) { + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); /* GPODR register 1 -> open drain on */ - setbits_be32(&base->gpodr, gpios); + if (data->little_endian) + setbits_le32(&data->base->gpodr, gpios); + else + setbits_be32(&data->base->gpodr, gpios); } -static inline void mpc8xxx_gpio_open_drain_off(struct ccsr_gpio *base, +static inline void mpc8xxx_gpio_open_drain_off(struct udevice *dev, u32 gpios) { + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); /* GPODR register 0 -> open drain off (actively driven) */ - clrbits_be32(&base->gpodr, gpios); + if (data->little_endian) + clrbits_le32(&data->base->gpodr, gpios); + else + clrbits_be32(&data->base->gpodr, gpios); } static int mpc8xxx_gpio_direction_input(struct udevice *dev, uint gpio) @@ -82,7 +110,10 @@ static int mpc8xxx_gpio_direction_input(struct udevice *dev, uint gpio) u32 mask = gpio_mask(gpio); /* GPDIR register 0 -> input */ - clrbits_be32(&data->base->gpdir, mask); + if (data->little_endian) + clrbits_le32(&data->base->gpdir, mask); + else + clrbits_be32(&data->base->gpdir, mask); return 0; } @@ -100,10 +131,20 @@ static int mpc8xxx_gpio_set_value(struct udevice *dev, uint gpio, int value) data->dat_shadow &= ~mask; } - gpdir = in_be32(&base->gpdir); + if (data->little_endian) + gpdir = in_le32(&base->gpdir); + else + gpdir = in_be32(&base->gpdir); + gpdir |= gpio_mask(gpio); - out_be32(&base->gpdat, gpdir & data->dat_shadow); - out_be32(&base->gpdir, gpdir); + + if (data->little_endian) { + out_le32(&base->gpdat, gpdir & data->dat_shadow); + out_le32(&base->gpdir, gpdir); + } else { + out_be32(&base->gpdat, gpdir & data->dat_shadow); + out_be32(&base->gpdir, gpdir); + } return 0; } @@ -124,21 +165,20 @@ static int mpc8xxx_gpio_get_value(struct udevice *dev, uint gpio) { struct mpc8xxx_gpio_data *data = dev_get_priv(dev); - if (!!mpc8xxx_gpio_get_dir(data->base, gpio_mask(gpio))) { + if (!!mpc8xxx_gpio_get_dir(dev, gpio_mask(gpio))) { /* Output -> use shadowed value */ return !!(data->dat_shadow & gpio_mask(gpio)); } /* Input -> read value from GPDAT register */ - return !!mpc8xxx_gpio_get_val(data->base, gpio_mask(gpio)); + return !!mpc8xxx_gpio_get_val(dev, gpio_mask(gpio)); } static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio) { - struct mpc8xxx_gpio_data *data = dev_get_priv(dev); int dir; - dir = !!mpc8xxx_gpio_get_dir(data->base, gpio_mask(gpio)); + dir = !!mpc8xxx_gpio_get_dir(dev, gpio_mask(gpio)); return dir ? GPIOF_OUTPUT : GPIOF_INPUT; } @@ -146,14 +186,33 @@ static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio) static int mpc8xxx_gpio_ofdata_to_platdata(struct udevice *dev) { struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev); + struct mpc8xxx_gpio_data *data = dev_get_priv(dev); fdt_addr_t addr; - u32 reg[2]; + u32 i; + u32 reg[4]; + + if (ofnode_read_bool(dev->node, "little-endian")) + data->little_endian = true; + + if (data->little_endian) + dev_read_u32_array(dev, "reg", reg, 4); + else + dev_read_u32_array(dev, "reg", reg, 2); + + if (data->little_endian) { + for (i = 0; i < 2; i++) + reg[i] = be32_to_cpu(reg[i]); + } - dev_read_u32_array(dev, "reg", reg, 2); addr = dev_translate_address(dev, reg); plat->addr = addr; - plat->size = reg[1]; + + if (data->little_endian) + plat->size = reg[3]; + else + plat->size = reg[1]; + plat->ngpios = dev_read_u32_default(dev, "ngpios", 32); return 0; @@ -198,6 +257,13 @@ static int mpc8xxx_gpio_probe(struct udevice *dev) if (!str) return -ENOMEM; + if (ofnode_device_is_compatible(dev->node, "fsl,qoriq-gpio")) { + unsigned long gpibe = data->addr + sizeof(struct ccsr_gpio) + - sizeof(u32); + + out_be32((unsigned int *)gpibe, 0xffffffff); + } + uc_priv->bank_name = str; uc_priv->gpio_count = data->gpio_count; diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c index 1e62c64..e57f1a1 100644 --- a/drivers/net/ldpaa_eth/lx2160a.c +++ b/drivers/net/ldpaa_eth/lx2160a.c @@ -92,7 +92,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT; - if (!ec && (wriop_is_enabled_dpmac(17) == -ENODEV)) + if (!ec) wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID); #endif @@ -101,7 +101,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT; - if (!ec && (wriop_is_enabled_dpmac(18) == -ENODEV)) + if (!ec) wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID); #endif } diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index dd1cc65..af92784 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -179,6 +179,18 @@ config PCIE_LAYERSCAPE_RC configured to Root Complex mode by clearing the corresponding bit of RCW[HOST_AGT_PEX]. +config PCI_IOMMU_EXTRA_MAPPINGS + bool "Support for specifying extra IOMMU mappings for PCI" + depends on PCIE_LAYERSCAPE_RC + help + Enable support for specifying extra IOMMU mappings for PCI + controllers through a special env var called "pci_iommu_extra" or + through a device tree property named "pci-iommu-extra" placed in + the node describing the PCI controller. + The intent is to cover SR-IOV scenarios which need mappings for VFs + and PCI hot-plug scenarios. More documentation can be found under: + arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra + config PCIE_LAYERSCAPE_EP bool "Layerscape PCIe Endpoint mode support" depends on DM_PCI diff --git a/drivers/pci/pcie_fsl.c b/drivers/pci/pcie_fsl.c index ab33459..fb50b8f 100644 --- a/drivers/pci/pcie_fsl.c +++ b/drivers/pci/pcie_fsl.c @@ -396,6 +396,19 @@ static int fsl_pcie_init_atmu(struct fsl_pcie *pcie) return 0; } +static void fsl_pcie_dbi_read_only_reg_write_enable(struct fsl_pcie *pcie, + bool enable) +{ + u32 val; + + fsl_pcie_hose_read_config_dword(pcie, DBI_RO_WR_EN, &val); + if (enable) + val |= 1; + else + val &= ~1; + fsl_pcie_hose_write_config_dword(pcie, DBI_RO_WR_EN, val); +} + static int fsl_pcie_init_port(struct fsl_pcie *pcie) { ccsr_fsl_pci_t *regs = pcie->regs; @@ -470,7 +483,7 @@ static int fsl_pcie_init_port(struct fsl_pcie *pcie) * Set to 0 to protect the read-only registers. */ #ifdef CONFIG_SYS_FSL_ERRATUM_A007815 - clrbits_be32(®s->dbi_ro_wr_en, 0x01); + fsl_pcie_dbi_read_only_reg_write_enable(pcie, false); #endif /* @@ -504,13 +517,12 @@ static int fsl_pcie_init_port(struct fsl_pcie *pcie) static int fsl_pcie_fixup_classcode(struct fsl_pcie *pcie) { - ccsr_fsl_pci_t *regs = pcie->regs; u32 classcode_reg; u32 val; if (pcie->block_rev >= PEX_IP_BLK_REV_3_0) { classcode_reg = PCI_CLASS_REVISION; - setbits_be32(®s->dbi_ro_wr_en, 0x01); + fsl_pcie_dbi_read_only_reg_write_enable(pcie, true); } else { classcode_reg = CSR_CLASSCODE; } @@ -521,7 +533,7 @@ static int fsl_pcie_fixup_classcode(struct fsl_pcie *pcie) fsl_pcie_hose_write_config_dword(pcie, classcode_reg, val); if (pcie->block_rev >= PEX_IP_BLK_REV_3_0) - clrbits_be32(®s->dbi_ro_wr_en, 0x01); + fsl_pcie_dbi_read_only_reg_write_enable(pcie, false); return 0; } diff --git a/drivers/pci/pcie_fsl.h b/drivers/pci/pcie_fsl.h index dc8368d..70c5f4e 100644 --- a/drivers/pci/pcie_fsl.h +++ b/drivers/pci/pcie_fsl.h @@ -26,6 +26,8 @@ /* PCIe Link Status Register */ #define PCI_LSR (FSL_PCIE_CAP_ID + 0x12) +#define DBI_RO_WR_EN 0x8bc + #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS 0 #endif diff --git a/drivers/pci/pcie_layerscape_fixup.c b/drivers/pci/pcie_layerscape_fixup.c index 1709cd3..c75cf26 100644 --- a/drivers/pci/pcie_layerscape_fixup.c +++ b/drivers/pci/pcie_layerscape_fixup.c @@ -19,9 +19,39 @@ #ifdef CONFIG_ARM #include <asm/arch/clock.h> #endif +#include <malloc.h> +#include <env.h> #include "pcie_layerscape.h" #include "pcie_layerscape_fixup_common.h" +static int fdt_pcie_get_nodeoffset(void *blob, struct ls_pcie_rc *pcie_rc) +{ + int nodeoffset; + uint svr; + char *compat = NULL; + + /* find pci controller node */ + nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie", + pcie_rc->dbi_res.start); + if (nodeoffset < 0) { +#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */ + svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; + if (svr == SVR_LS2088A || svr == SVR_LS2084A || + svr == SVR_LS2048A || svr == SVR_LS2044A || + svr == SVR_LS2081A || svr == SVR_LS2041A) + compat = "fsl,ls2088a-pcie"; + else + compat = CONFIG_FSL_PCIE_COMPAT; + + nodeoffset = + fdt_node_offset_by_compat_reg(blob, compat, + pcie_rc->dbi_res.start); +#endif + } + + return nodeoffset; +} + #if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2) /* * Return next available LUT index. @@ -127,30 +157,11 @@ static void fdt_pcie_set_iommu_map_entry_ls(void *blob, u32 iommu_map[4]; int nodeoffset; int lenp; - uint svr; - char *compat = NULL; struct ls_pcie *pcie = pcie_rc->pcie; - /* find pci controller node */ - nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie", - pcie_rc->dbi_res.start); - if (nodeoffset < 0) { -#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */ - svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; - if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A || - svr == SVR_LS2081A || svr == SVR_LS2041A) - compat = "fsl,ls2088a-pcie"; - else - compat = CONFIG_FSL_PCIE_COMPAT; - - if (compat) - nodeoffset = fdt_node_offset_by_compat_reg(blob, - compat, pcie_rc->dbi_res.start); -#endif - if (nodeoffset < 0) - return; - } + nodeoffset = fdt_pcie_get_nodeoffset(blob, pcie_rc); + if (nodeoffset < 0) + return; /* get phandle to iommu controller */ prop = fdt_getprop_w(blob, nodeoffset, "iommu-map", &lenp); @@ -174,13 +185,323 @@ static void fdt_pcie_set_iommu_map_entry_ls(void *blob, } } +static int fdt_fixup_pcie_device_ls(void *blob, pci_dev_t bdf, + struct ls_pcie_rc *pcie_rc) +{ + int streamid, index; + + streamid = pcie_next_streamid(pcie_rc->stream_id_cur, + pcie_rc->pcie->idx); + if (streamid < 0) { + printf("ERROR: out of stream ids for BDF %d.%d.%d\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + return -ENOENT; + } + pcie_rc->stream_id_cur++; + + index = ls_pcie_next_lut_index(pcie_rc); + if (index < 0) { + printf("ERROR: out of LUT indexes for BDF %d.%d.%d\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + return -ENOENT; + } + + /* map PCI b.d.f to streamID in LUT */ + ls_pcie_lut_set_mapping(pcie_rc, index, bdf >> 8, streamid); + /* update msi-map in device tree */ + fdt_pcie_set_msi_map_entry_ls(blob, pcie_rc, bdf >> 8, streamid); + /* update iommu-map in device tree */ + fdt_pcie_set_iommu_map_entry_ls(blob, pcie_rc, bdf >> 8, streamid); + + return 0; +} + +struct extra_iommu_entry { + int action; + pci_dev_t bdf; + int num_vfs; + bool noari; +}; + +#define EXTRA_IOMMU_ENTRY_HOTPLUG 1 +#define EXTRA_IOMMU_ENTRY_VFS 2 + +static struct extra_iommu_entry *get_extra_iommu_ents(void *blob, + int nodeoffset, + phys_addr_t addr, + int *cnt) +{ + const char *s, *p, *tok; + struct extra_iommu_entry *entries; + int i = 0, b, d, f; + + /* + * Retrieve extra IOMMU configuration from env var or from device tree. + * Env var is given priority. + */ + s = env_get("pci_iommu_extra"); + if (!s) { + s = fdt_getprop(blob, nodeoffset, "pci-iommu-extra", NULL); + } else { + phys_addr_t pci_base; + char *endp; + + /* + * In env var case the config string has "pci@0x..." in + * addition. Parse this part and match it by address against + * the input pci controller's registers base address. + */ + tok = s; + p = strchrnul(s + 1, ','); + s = NULL; + do { + if (!strncmp(tok, "pci", 3)) { + pci_base = simple_strtoul(tok + 4, &endp, 0); + if (pci_base == addr) { + s = endp + 1; + break; + } + } + p = strchrnul(p + 1, ','); + tok = p + 1; + } while (*p); + } + + /* + * If no env var or device tree property found or pci register base + * address mismatches, bail out + */ + if (!s) + return NULL; + + /* + * In order to find how many action entries to allocate, count number + * of actions by interating through the pairs of bdfs and actions. + */ + *cnt = 0; + p = s; + while (*p && strncmp(p, "pci", 3)) { + if (*p == ',') + (*cnt)++; + p++; + } + if (!(*p)) + (*cnt)++; + + if (!(*cnt) || (*cnt) % 2) { + printf("ERROR: invalid or odd extra iommu token count %d\n", + *cnt); + return NULL; + } + *cnt = (*cnt) / 2; + + entries = malloc((*cnt) * sizeof(*entries)); + if (!entries) { + printf("ERROR: fail to allocate extra iommu entries\n"); + return NULL; + } + + /* + * Parse action entries one by one and store the information in the + * newly allocated actions array. + */ + p = s; + while (p) { + /* Extract BDF */ + b = simple_strtoul(p, (char **)&p, 0); p++; + d = simple_strtoul(p, (char **)&p, 0); p++; + f = simple_strtoul(p, (char **)&p, 0); p++; + entries[i].bdf = PCI_BDF(b, d, f); + + /* Parse action */ + if (!strncmp(p, "hp", 2)) { + /* Hot-plug entry */ + entries[i].action = EXTRA_IOMMU_ENTRY_HOTPLUG; + p += 2; + } else if (!strncmp(p, "vfs", 3) || + !strncmp(p, "noari_vfs", 9)) { + /* VFs or VFs with ARI disabled entry */ + entries[i].action = EXTRA_IOMMU_ENTRY_VFS; + entries[i].noari = !strncmp(p, "noari_vfs", 9); + + /* + * Parse and store total number of VFs to allocate + * IOMMU entries for. + */ + p = strchr(p, '='); + entries[i].num_vfs = simple_strtoul(p + 1, (char **)&p, + 0); + if (*p) + p++; + } else { + printf("ERROR: invalid action in extra iommu entry\n"); + free(entries); + + return NULL; + } + + if (!(*p) || !strncmp(p, "pci", 3)) + break; + + i++; + } + + return entries; +} + +static void get_vf_offset_and_stride(struct udevice *dev, int sriov_pos, + struct extra_iommu_entry *entry, + u16 *offset, u16 *stride) +{ + u16 tmp16; + u32 tmp32; + bool have_ari = false; + int pos; + struct udevice *pf_dev; + + dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_TOTAL_VF, &tmp16); + if (entry->num_vfs > tmp16) { + printf("WARN: requested no. of VFs %d exceeds total of %d\n", + entry->num_vfs, tmp16); + } + + /* + * The code below implements the VF Discovery recomandations specified + * in PCIe base spec "9.2.1.2 VF Discovery", quoted below: + * + * VF Discovery + * + * The First VF Offset and VF Stride fields in the SR-IOV extended + * capability are 16-bit Routing ID offsets. These offsets are used to + * compute the Routing IDs for the VFs with the following restrictions: + * - The value in NumVFs in a PF (Section 9.3.3.7) may affect the + * values in First VF Offset (Section 9.3.3.9) and VF Stride + * (Section 9.3.3.10) of that PF. + * - The value in ARI Capable Hierarchy (Section 9.3.3.3.5) in the + * lowest-numbered PF of the Device (for example PF0) may affect + * the values in First VF Offset and VF Stride in all PFs of the + * Device. + * - NumVFs of a PF may only be changed when VF Enable + * (Section 9.3.3.3.1) of that PF is Clear. + * - ARI Capable Hierarchy (Section 9.3.3.3.5) may only be changed + * when VF Enable is Clear in all PFs of a Device. + */ + + /* Clear VF enable for all PFs */ + device_foreach_child(pf_dev, dev->parent) { + dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + &tmp16); + tmp16 &= ~PCI_SRIOV_CTRL_VFE; + dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + tmp16); + } + + /* Obtain a reference to PF0 device */ + if (dm_pci_bus_find_bdf(PCI_BDF(PCI_BUS(entry->bdf), + PCI_DEV(entry->bdf), 0), &pf_dev)) { + printf("WARN: failed to get PF0\n"); + } + + if (entry->noari) + goto skip_ari; + + /* Check that connected downstream port supports ARI Forwarding */ + pos = dm_pci_find_capability(dev->parent, PCI_CAP_ID_EXP); + dm_pci_read_config32(dev->parent, pos + PCI_EXP_DEVCAP2, &tmp32); + if (!(tmp32 & PCI_EXP_DEVCAP2_ARI)) + goto skip_ari; + + /* Check that PF supports Alternate Routing ID */ + if (!dm_pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI)) + goto skip_ari; + + /* Set ARI Capable Hierarcy for PF0 */ + dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, &tmp16); + tmp16 |= PCI_SRIOV_CTRL_ARI; + dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, tmp16); + have_ari = true; + +skip_ari: + if (!have_ari) { + /* + * No ARI support or disabled so clear ARI Capable Hierarcy + * for PF0 + */ + dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + &tmp16); + tmp16 &= ~PCI_SRIOV_CTRL_ARI; + dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + tmp16); + } + + /* Set requested number of VFs */ + dm_pci_write_config16(dev, sriov_pos + PCI_SRIOV_NUM_VF, + entry->num_vfs); + + /* Read VF stride and offset with the configs just made */ + dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_VF_OFFSET, offset); + dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_VF_STRIDE, stride); + + if (have_ari) { + /* Reset to default ARI Capable Hierarcy bit for PF0 */ + dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + &tmp16); + tmp16 &= ~PCI_SRIOV_CTRL_ARI; + dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, + tmp16); + } + /* Reset to default the number of VFs */ + dm_pci_write_config16(dev, sriov_pos + PCI_SRIOV_NUM_VF, 0); +} + +static int fdt_fixup_pci_vfs(void *blob, struct extra_iommu_entry *entry, + struct ls_pcie_rc *pcie_rc) +{ + struct udevice *dev, *bus; + u16 vf_offset, vf_stride; + int i, sriov_pos; + pci_dev_t bdf; + + if (dm_pci_bus_find_bdf(entry->bdf, &dev)) { + printf("ERROR: BDF %d.%d.%d not found\n", PCI_BUS(entry->bdf), + PCI_DEV(entry->bdf), PCI_FUNC(entry->bdf)); + return 0; + } + + sriov_pos = dm_pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!sriov_pos) { + printf("WARN: trying to set VFs on non-SRIOV dev\n"); + return 0; + } + + get_vf_offset_and_stride(dev, sriov_pos, entry, &vf_offset, &vf_stride); + + for (bus = dev; device_is_on_pci_bus(bus);) + bus = bus->parent; + + bdf = entry->bdf - PCI_BDF(bus->seq, 0, 0) + (vf_offset << 8); + + for (i = 0; i < entry->num_vfs; i++) { + if (fdt_fixup_pcie_device_ls(blob, bdf, pcie_rc) < 0) + return -1; + bdf += vf_stride << 8; + } + + printf("Added %d iommu VF mappings for PF %d.%d.%d\n", + entry->num_vfs, PCI_BUS(entry->bdf), + PCI_DEV(entry->bdf), PCI_FUNC(entry->bdf)); + + return 0; +} + static void fdt_fixup_pcie_ls(void *blob) { struct udevice *dev, *bus; struct ls_pcie_rc *pcie_rc; - int streamid; - int index; pci_dev_t bdf; + struct extra_iommu_entry *entries; + int i, cnt, nodeoffset; + /* Scan all known buses */ for (pci_find_first_device(&dev); @@ -196,33 +517,57 @@ static void fdt_fixup_pcie_ls(void *blob) pcie_rc = dev_get_priv(bus); - streamid = pcie_next_streamid(pcie_rc->stream_id_cur, - pcie_rc->pcie->idx); - if (streamid < 0) { - debug("ERROR: no stream ids free\n"); + /* the DT fixup must be relative to the hose first_busno */ + bdf = dm_pci_get_bdf(dev) - PCI_BDF(bus->seq, 0, 0); + + if (fdt_fixup_pcie_device_ls(blob, bdf, pcie_rc) < 0) + break; + } + + if (!IS_ENABLED(CONFIG_PCI_IOMMU_EXTRA_MAPPINGS)) + goto skip; + + list_for_each_entry(pcie_rc, &ls_pcie_list, list) { + nodeoffset = fdt_pcie_get_nodeoffset(blob, pcie_rc); + if (nodeoffset < 0) { + printf("ERROR: couldn't find pci node\n"); continue; - } else { - pcie_rc->stream_id_cur++; } - index = ls_pcie_next_lut_index(pcie_rc); - if (index < 0) { - debug("ERROR: no LUT indexes free\n"); + entries = get_extra_iommu_ents(blob, nodeoffset, + pcie_rc->dbi_res.start, &cnt); + if (!entries) continue; - } - /* the DT fixup must be relative to the hose first_busno */ - bdf = dm_pci_get_bdf(dev) - PCI_BDF(bus->seq, 0, 0); - /* map PCI b.d.f to streamID in LUT */ - ls_pcie_lut_set_mapping(pcie_rc, index, bdf >> 8, - streamid); - /* update msi-map in device tree */ - fdt_pcie_set_msi_map_entry_ls(blob, pcie_rc, bdf >> 8, - streamid); - /* update iommu-map in device tree */ - fdt_pcie_set_iommu_map_entry_ls(blob, pcie_rc, bdf >> 8, - streamid); + for (i = 0; i < cnt; i++) { + if (entries[i].action == EXTRA_IOMMU_ENTRY_HOTPLUG) { + bdf = entries[i].bdf; + printf("Added iommu map for hotplug %d.%d.%d\n", + PCI_BUS(bdf), PCI_DEV(bdf), + PCI_FUNC(bdf)); + if (fdt_fixup_pcie_device_ls(blob, bdf, + pcie_rc) < 0) { + free(entries); + return; + } + } else if (entries[i].action == EXTRA_IOMMU_ENTRY_VFS) { + if (fdt_fixup_pci_vfs(blob, &entries[i], + pcie_rc) < 0) { + free(entries); + return; + } + } else { + printf("Invalid action %d for BDF %d.%d.%d\n", + entries[i].action, + PCI_BUS(entries[i].bdf), + PCI_DEV(entries[i].bdf), + PCI_FUNC(entries[i].bdf)); + } + } + free(entries); } + +skip: pcie_board_fix_fdt(blob); } #endif @@ -230,28 +575,11 @@ static void fdt_fixup_pcie_ls(void *blob) static void ft_pcie_rc_fix(void *blob, struct ls_pcie_rc *pcie_rc) { int off; - uint svr; - char *compat = NULL; struct ls_pcie *pcie = pcie_rc->pcie; - off = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie", - pcie_rc->dbi_res.start); - if (off < 0) { -#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */ - svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; - if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A || - svr == SVR_LS2081A || svr == SVR_LS2041A) - compat = "fsl,ls2088a-pcie"; - else - compat = CONFIG_FSL_PCIE_COMPAT; - if (compat) - off = fdt_node_offset_by_compat_reg(blob, - compat, pcie_rc->dbi_res.start); -#endif - if (off < 0) - return; - } + off = fdt_pcie_get_nodeoffset(blob, pcie_rc); + if (off < 0) + return; if (pcie_rc->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE) fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h new file mode 100644 index 0000000..afe512a --- /dev/null +++ b/include/configs/kontron_sl28.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __SL28_H +#define __SL28_H + +#include <asm/arch/stream_id_lsch3.h> +#include <asm/arch/config.h> +#include <asm/arch/soc.h> + +/* we don't use hwconfig but this has to be defined.. */ +#define HWCONFIG_BUFFER_SIZE 256 + +/* we don't have secure memory unless we have a BL31 */ +#ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT +#undef CONFIG_SYS_MEM_RESERVE_SECURE +#endif + +/* DDR */ +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef + +#define CONFIG_VERY_BIG_RAM +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 + +/* early stack pointer */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0) + +/* memtest command */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* SMP */ +#define CPU_RELEASE_ADDR secondary_boot_addr + +/* generic timer */ +#define COUNTER_FREQUENCY 25000000 + +/* size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) + +/* early heap for SPL DM */ +#define CONFIG_MALLOC_F_ADDR CONFIG_SYS_FSL_OCRAM_BASE + +/* serial port */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +/* ethernet */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 + +/* SPL */ +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SPL_MAX_SIZE 0x20000 +#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) + +/* environment */ +/* see include/configs/ti_armv7_common.h */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define ENV_MEM_LAYOUT_SETTINGS \ + "loadaddr=0x82000000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "bootm_size=0x10000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "scriptaddr=0x80000000\0" \ + "ramdisk_addr_r=0x88080000\0" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(NVME, nvme, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, 0) \ + func(PXE, pxe, 0) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "env_addr=0x203e0004\0" \ + "envload=env import -d -b ${env_addr}\0" \ + "install_rcw=source 20200000\0" \ + "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV + +#endif /* __SL28_H */ diff --git a/include/pci.h b/include/pci.h index 1c5b366..d1ccf6c 100644 --- a/include/pci.h +++ b/include/pci.h @@ -495,12 +495,18 @@ #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* ARI Forwarding Supported */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ + #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ /* Single Root I/O Virtualization Registers */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ #define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ #define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ #define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ #define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ #define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ #define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ |