diff options
51 files changed, 554 insertions, 169 deletions
diff --git a/arch/arm/dts/uniphier-ld11-global.dts b/arch/arm/dts/uniphier-ld11-global.dts index 7a650a0..5ffe7de 100644 --- a/arch/arm/dts/uniphier-ld11-global.dts +++ b/arch/arm/dts/uniphier-ld11-global.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "uniphier-ld11.dtsi" +#include "uniphier-ld11.dtsi" / { model = "UniPhier LD11 Global Board (REF_LD11_GP)"; @@ -68,3 +68,7 @@ &usb2 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ld11-ref.dts b/arch/arm/dts/uniphier-ld11-ref.dts index cc8ebe3..ffb473a 100644 --- a/arch/arm/dts/uniphier-ld11-ref.dts +++ b/arch/arm/dts/uniphier-ld11-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld11.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld11.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD11 Reference Board"; diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index 74f8f72..0f172c3 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -348,9 +348,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-ld11-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; gic: interrupt-controller@5fe00000 { @@ -376,6 +378,10 @@ compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; }; nand: nand@68000000 { @@ -387,9 +393,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-ld20-global.dts b/arch/arm/dts/uniphier-ld20-global.dts index 9f620d4..fc2bc9d 100644 --- a/arch/arm/dts/uniphier-ld20-global.dts +++ b/arch/arm/dts/uniphier-ld20-global.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "uniphier-ld20.dtsi" +#include "uniphier-ld20.dtsi" / { model = "UniPhier LD20 Global Board (REF_LD20_GP)"; @@ -50,3 +50,7 @@ &i2c0 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ld20-ref.dts b/arch/arm/dts/uniphier-ld20-ref.dts index 494166a..1ca0c86 100644 --- a/arch/arm/dts/uniphier-ld20-ref.dts +++ b/arch/arm/dts/uniphier-ld20-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld20.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld20.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD20 Reference Board"; diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 44257af..a7fdaa7 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -313,7 +313,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-ld20-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-ld20-sd-clock"; @@ -383,9 +383,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-ld20-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; gic: interrupt-controller@5fe00000 { @@ -411,6 +413,10 @@ compatible = "socionext,uniphier-ld20-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; }; usb: usb@65b00000 { @@ -440,9 +446,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-ld4-ref.dts b/arch/arm/dts/uniphier-ld4-ref.dts index 0520e3c..0f50acb 100644 --- a/arch/arm/dts/uniphier-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ld4-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld4.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld4.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD4 Reference Board"; diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index 18a105a..a3bcf22 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -424,9 +424,11 @@ interrupt-controller; }; - aidet@61830000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@61830000 { + compatible = "socionext,uniphier-ld4-aidet"; reg = <0x61830000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; sysctrl@61840000 { @@ -452,11 +454,10 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; + pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-ld6b-ref.dts b/arch/arm/dts/uniphier-ld6b-ref.dts index b4bb5b5..bdb7f50 100644 --- a/arch/arm/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ld6b-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld6b.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld6b.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD6b Reference Board"; diff --git a/arch/arm/dts/uniphier-ld6b.dtsi b/arch/arm/dts/uniphier-ld6b.dtsi index 8b9a797..9a7b25c 100644 --- a/arch/arm/dts/uniphier-ld6b.dtsi +++ b/arch/arm/dts/uniphier-ld6b.dtsi @@ -12,7 +12,7 @@ * The D-chip (digital chip) is the same as the PXs2 die. * Reuse the PXs2 device tree with some properties overridden. */ -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { compatible = "socionext,uniphier-ld6b"; diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi b/arch/arm/dts/uniphier-pinctrl.dtsi index f5c1552..d5e8aaf 100644 --- a/arch/arm/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/dts/uniphier-pinctrl.dtsi @@ -8,6 +8,11 @@ */ &pinctrl { + pinctrl_aout: aout_grp { + groups = "aout"; + function = "aout"; + }; + pinctrl_emmc: emmc_grp { groups = "emmc", "emmc_dat8"; function = "emmc"; diff --git a/arch/arm/dts/uniphier-pro4-ace.dts b/arch/arm/dts/uniphier-pro4-ace.dts index 9276f8d..8161ba8 100644 --- a/arch/arm/dts/uniphier-pro4-ace.dts +++ b/arch/arm/dts/uniphier-pro4-ace.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" +#include "uniphier-pro4.dtsi" / { model = "UniPhier Pro4 Ace Board"; diff --git a/arch/arm/dts/uniphier-pro4-ref.dts b/arch/arm/dts/uniphier-pro4-ref.dts index 13e1b3e..360b31d 100644 --- a/arch/arm/dts/uniphier-pro4-ref.dts +++ b/arch/arm/dts/uniphier-pro4-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-pro4.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier Pro4 Reference Board"; diff --git a/arch/arm/dts/uniphier-pro4-sanji.dts b/arch/arm/dts/uniphier-pro4-sanji.dts index 568dbd5..778e2bb 100644 --- a/arch/arm/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/dts/uniphier-pro4-sanji.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" +#include "uniphier-pro4.dtsi" / { model = "UniPhier Pro4 Sanji Board"; diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index cbb8482..b45f23c 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -531,9 +531,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; timer@60000200 { @@ -619,9 +621,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-pro5-4kbox.dts b/arch/arm/dts/uniphier-pro5-4kbox.dts index d593090..05597d3 100644 --- a/arch/arm/dts/uniphier-pro5-4kbox.dts +++ b/arch/arm/dts/uniphier-pro5-4kbox.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pro5.dtsi" +#include "uniphier-pro5.dtsi" / { model = "UniPhier Pro5 4KBOX Board"; @@ -26,7 +26,7 @@ i2c6 = &i2c6; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index 498354c..94eb656 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -500,7 +500,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pro5-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; u-boot,dm-pre-reloc; sd_clk: clock { @@ -542,9 +542,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; timer@60000200 { @@ -628,9 +630,8 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; + pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; emmc: sdhc@68400000 { @@ -670,4 +671,4 @@ }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-pxs2-gentil.dts b/arch/arm/dts/uniphier-pxs2-gentil.dts index 6f691a8..7f0f972 100644 --- a/arch/arm/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/dts/uniphier-pxs2-gentil.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { model = "UniPhier PXs2 Gentil Board"; diff --git a/arch/arm/dts/uniphier-pxs2-vodka.dts b/arch/arm/dts/uniphier-pxs2-vodka.dts index d13e5f2..ec9ffb7 100644 --- a/arch/arm/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/dts/uniphier-pxs2-vodka.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { model = "UniPhier PXs2 Vodka Board"; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 32844f7..c304d90 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -477,7 +477,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pxs2-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; u-boot,dm-pre-reloc; sd_clk: clock { @@ -554,9 +554,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; timer@60000200 { @@ -640,11 +642,10 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; + pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-pxs3-ref.dts b/arch/arm/dts/uniphier-pxs3-ref.dts index cb1eef4..1118dd7 100644 --- a/arch/arm/dts/uniphier-pxs3-ref.dts +++ b/arch/arm/dts/uniphier-pxs3-ref.dts @@ -4,13 +4,12 @@ * Copyright (C) 2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * SPDX-License-Identifier: GPL-2.0+ X11 + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; -/include/ "uniphier-pxs3.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-pxs3.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier PXs3 Reference Board"; @@ -39,7 +38,7 @@ }; ðsc { - interrupts = <0 48 4>; + interrupts = <0 52 4>; }; &serial0 { @@ -49,3 +48,23 @@ &i2c0 { status = "okay"; }; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index cdf7f90..8944005 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -4,46 +4,10 @@ * Copyright (C) 2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/memreserve/ 0x80000000 0x00080000; +/memreserve/ 0x80000000 0x02000000; / { compatible = "socionext,uniphier-pxs3"; @@ -76,28 +40,74 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x000>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x001>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x002>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x003>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + }; + + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + clock-latency-ns = <300>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + clock-latency-ns = <300>; + }; + opp-666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp-866667000 { + opp-hz = /bits/ 64 <866667000>; + clock-latency-ns = <300>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + clock-latency-ns = <300>; }; }; @@ -172,6 +182,22 @@ clock-frequency = <58820000>; }; + gpio: gpio@55000000 { + compatible = "socionext,uniphier-pxs3-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; @@ -205,6 +231,8 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; clock-frequency = <100000>; }; @@ -251,7 +279,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pxs3-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-pxs3-sd-clock"; @@ -282,7 +310,6 @@ emmc: sdhc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; - status = "disabled"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; pinctrl-names = "default"; @@ -291,6 +318,11 @@ bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + cdns,phy-input-delay-legacy = <4>; + cdns,phy-input-delay-mmc-highspeed = <2>; + cdns,phy-input-delay-mmc-ddr = <3>; + cdns,phy-dll-delay-sdclk = <21>; + cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; sd: sdhc@5a400000 { @@ -317,9 +349,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pxs3-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; gic: interrupt-controller@5fe00000 { @@ -345,10 +379,50 @@ compatible = "socionext,uniphier-pxs3-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; + + usb0: usb@65b00000 { + compatible = "socionext,uniphier-pxs3-dwc3"; + status = "disabled"; + reg = <0x65b00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + dwc3@65a00000 { + compatible = "snps,dwc3"; + reg = <0x65a00000 0x10000>; + interrupts = <0 134 4>; + dr_mode = "host"; + tx-fifo-resize; + }; + }; + + usb1: usb@65d00000 { + compatible = "socionext,uniphier-pxs3-dwc3"; + status = "disabled"; + reg = <0x65d00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + dwc3@65c00000 { + compatible = "snps,dwc3"; + reg = <0x65c00000 0x10000>; + interrupts = <0 137 4>; + dr_mode = "host"; + tx-fifo-resize; + }; }; nand: nand@68000000 { - compatible = "socionext,denali-nand-v5b"; + compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; @@ -356,9 +430,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/dts/uniphier-sld8-ref.dts b/arch/arm/dts/uniphier-sld8-ref.dts index 6ddf2a1..3557bb7 100644 --- a/arch/arm/dts/uniphier-sld8-ref.dts +++ b/arch/arm/dts/uniphier-sld8-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-sld8.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-sld8.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier sLD8 Reference Board"; diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index 7d6370f..a3de26b 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -424,9 +424,11 @@ interrupt-controller; }; - aidet@61830000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@61830000 { + compatible = "socionext,uniphier-sld8-aidet"; reg = <0x61830000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; sysctrl@61840000 { @@ -452,11 +454,10 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; + pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 6a7e239..ee22112 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -9,7 +9,6 @@ config ARCH_UNIPHIER_32BIT select CPU_V7_HAS_NONSEC select ARMV7_NONSEC select ARCH_SUPPORT_PSCI - imply NAND choice prompt "UniPhier SoC select" diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index ed58d07..a6ee22e 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -78,7 +78,6 @@ static void uniphier_ld20_misc_init(void) struct uniphier_initdata { unsigned int soc_id; - bool nand_2cs; void (*sbc_init)(void); void (*pll_init)(void); void (*clk_init)(void); @@ -89,7 +88,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD4) { .soc_id = UNIPHIER_LD4_ID, - .nand_2cs = true, .sbc_init = uniphier_ld4_sbc_init, .pll_init = uniphier_ld4_pll_init, .clk_init = uniphier_ld4_clk_init, @@ -98,7 +96,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO4) { .soc_id = UNIPHIER_PRO4_ID, - .nand_2cs = false, .sbc_init = uniphier_sbc_init_savepin, .pll_init = uniphier_pro4_pll_init, .clk_init = uniphier_pro4_clk_init, @@ -107,7 +104,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_SLD8) { .soc_id = UNIPHIER_SLD8_ID, - .nand_2cs = true, .sbc_init = uniphier_ld4_sbc_init, .pll_init = uniphier_ld4_pll_init, .clk_init = uniphier_ld4_clk_init, @@ -116,7 +112,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO5) { .soc_id = UNIPHIER_PRO5_ID, - .nand_2cs = true, .sbc_init = uniphier_sbc_init_savepin, .clk_init = uniphier_pro5_clk_init, }, @@ -124,7 +119,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PXS2) { .soc_id = UNIPHIER_PXS2_ID, - .nand_2cs = true, .sbc_init = uniphier_pxs2_sbc_init, .clk_init = uniphier_pxs2_clk_init, }, @@ -132,7 +126,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD6B) { .soc_id = UNIPHIER_LD6B_ID, - .nand_2cs = true, .sbc_init = uniphier_pxs2_sbc_init, .clk_init = uniphier_pxs2_clk_init, }, @@ -140,7 +133,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD11) { .soc_id = UNIPHIER_LD11_ID, - .nand_2cs = false, .sbc_init = uniphier_ld11_sbc_init, .pll_init = uniphier_ld11_pll_init, .clk_init = uniphier_ld11_clk_init, @@ -150,7 +142,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD20) { .soc_id = UNIPHIER_LD20_ID, - .nand_2cs = false, .sbc_init = uniphier_ld11_sbc_init, .pll_init = uniphier_ld20_pll_init, .clk_init = uniphier_ld20_clk_init, @@ -160,7 +151,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PXS3) { .soc_id = UNIPHIER_PXS3_ID, - .nand_2cs = false, .sbc_init = uniphier_pxs2_sbc_init, .pll_init = uniphier_pxs3_pll_init, .clk_init = uniphier_pxs3_clk_init, @@ -172,7 +162,6 @@ UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_initdata, uniphier_initdata) int board_init(void) { const struct uniphier_initdata *initdata; - int ret; led_puts("U0"); @@ -188,33 +177,24 @@ int board_init(void) led_puts("U0"); - if (IS_ENABLED(CONFIG_NAND_DENALI)) { - ret = uniphier_pin_init(initdata->nand_2cs ? - "nand2cs_grp" : "nand_grp"); - if (ret) - pr_err("failed to init NAND pins\n"); - } - - led_puts("U1"); - if (initdata->pll_init) initdata->pll_init(); - led_puts("U2"); + led_puts("U1"); if (initdata->clk_init) initdata->clk_init(); - led_puts("U3"); + led_puts("U2"); if (initdata->misc_init) initdata->misc_init(); - led_puts("U4"); + led_puts("U3"); uniphier_setup_xirq(); - led_puts("U5"); + led_puts("U4"); support_card_late_init(); diff --git a/arch/arm/mach-uniphier/clk/pll-base-ld20.c b/arch/arm/mach-uniphier/clk/pll-base-ld20.c index 697eb7a..3aa42f8 100644 --- a/arch/arm/mach-uniphier/clk/pll-base-ld20.c +++ b/arch/arm/mach-uniphier/clk/pll-base-ld20.c @@ -88,7 +88,7 @@ int uniphier_ld20_sscpll_set_regi(unsigned long reg_base, unsigned regi) if (!base) return -ENOMEM; - tmp = readl(base + 8); /* SSCPLLCTRL */ + tmp = readl(base + 8); /* SSCPLLCTRL3 */ tmp &= ~SC_PLLCTRL3_REGI_MASK; tmp |= regi << SC_PLLCTRL3_REGI_SHIFT; writel(tmp, base + 8); @@ -133,9 +133,9 @@ int uniphier_ld20_dspll_init(unsigned long reg_base) if (!base) return -ENOMEM; - tmp = readl(base + 8); /* DSPLLCTRL2 */ + tmp = readl(base + 4); /* DSPLLCTRL2 */ tmp |= SC_DSPLLCTRL2_K_LD; - writel(tmp, base + 8); + writel(tmp, base + 4); iounmap(base); diff --git a/arch/arm/mach-uniphier/clk/pll-ld11.c b/arch/arm/mach-uniphier/clk/pll-ld11.c index 02befa2..1a7ec29 100644 --- a/arch/arm/mach-uniphier/clk/pll-ld11.c +++ b/arch/arm/mach-uniphier/clk/pll-ld11.c @@ -4,13 +4,24 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/delay.h> #include <linux/io.h> #include "../init.h" #include "../sc64-regs.h" #include "pll.h" +/* PLL type: SSC */ +#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ +#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ +#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* DSP */ +#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x1440) /* Video codec, VPE etc. */ +#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1460) /* DDR memory */ + +/* PLL type: VPLL27 */ +#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) + void uniphier_ld11_pll_init(void) { uniphier_ld20_sscpll_init(SC_CPLLCTRL, 1960, 1, 2); /* 2000MHz -> 1960MHz */ diff --git a/arch/arm/mach-uniphier/clk/pll-ld20.c b/arch/arm/mach-uniphier/clk/pll-ld20.c index 121a369..5e072c6 100644 --- a/arch/arm/mach-uniphier/clk/pll-ld20.c +++ b/arch/arm/mach-uniphier/clk/pll-ld20.c @@ -5,12 +5,31 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/delay.h> #include "../init.h" #include "../sc64-regs.h" #include "pll.h" +/* PLL type: SSC */ +#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ +#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ +#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */ +#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* Video codec */ +#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* VPE etc. */ +#define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* GPU/Mali */ +#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* DDR memory 0 */ +#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* DDR memory 1 */ +#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 2 */ + +/* PLL type: VPLL27 */ +#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) + +/* PLL type: DSPLL */ +#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) +#define SC_A2PLLCTRL (SC_BASE_ADDR | 0x15C0) + void uniphier_ld20_pll_init(void) { uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); diff --git a/arch/arm/mach-uniphier/clk/pll-pxs3.c b/arch/arm/mach-uniphier/clk/pll-pxs3.c index 201d351..e84d52b 100644 --- a/arch/arm/mach-uniphier/clk/pll-pxs3.c +++ b/arch/arm/mach-uniphier/clk/pll-pxs3.c @@ -1,9 +1,64 @@ /* + * Copyright (C) 2017 Socionext Inc. + * * SPDX-License-Identifier: GPL-2.0+ */ +#include <linux/delay.h> + #include "../init.h" +#include "../sc64-regs.h" +#include "pll.h" + +/* PLL type: SSC */ +#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ +#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ +#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */ +#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1430) /* VPE */ +#define SC_VGPLLCTRL (SC_BASE_ADDR | 0x1440) +#define SC_DECPLLCTRL (SC_BASE_ADDR | 0x1450) +#define SC_ENCPLLCTRL (SC_BASE_ADDR | 0x1460) +#define SC_PXFPLLCTRL (SC_BASE_ADDR | 0x1470) +#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 0 */ +#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1490) /* DDR memory 1 */ +#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x14a0) /* DDR memory 2 */ +#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x14c0) + +/* PLL type: VPLL27 */ +#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) + +/* PLL type: DSPLL */ +#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) void uniphier_pxs3_pll_init(void) { + uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + /* do nothing for SPLL */ + uniphier_ld20_sscpll_init(SC_SPLL2CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + uniphier_ld20_sscpll_init(SC_VPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + uniphier_ld20_sscpll_init(SC_VGPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + uniphier_ld20_sscpll_init(SC_DECPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + uniphier_ld20_sscpll_init(SC_ENCPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + uniphier_ld20_sscpll_init(SC_PXFPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + uniphier_ld20_sscpll_init(SC_VSPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + + mdelay(1); + + uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_SPLL2CTRL); + uniphier_ld20_sscpll_ssc_en(SC_VPPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_VGPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_DECPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_ENCPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_PXFPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_DPLL0CTRL); + uniphier_ld20_sscpll_ssc_en(SC_DPLL1CTRL); + uniphier_ld20_sscpll_ssc_en(SC_DPLL2CTRL); + uniphier_ld20_sscpll_ssc_en(SC_VSPLLCTRL); + + uniphier_ld20_vpll27_init(SC_VPLL27FCTRL); + uniphier_ld20_vpll27_init(SC_VPLL27ACTRL); + + uniphier_ld20_dspll_init(SC_VPLL8KCTRL); } diff --git a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c b/arch/arm/mach-uniphier/sbc/sbc-pxs2.c index 342a086..0e0ba27 100644 --- a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c +++ b/arch/arm/mach-uniphier/sbc/sbc-pxs2.c @@ -16,4 +16,6 @@ void uniphier_pxs2_sbc_init(void) /* necessary for ROM boot ?? */ /* system bus output enable */ writel(0x17, PC0CTRL); + + uniphier_pin_init("system_bus_grp"); /* PXs3 */ } diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h index d3aa185..d0a51f2 100644 --- a/arch/arm/mach-uniphier/sc64-regs.h +++ b/arch/arm/mach-uniphier/sc64-regs.h @@ -12,27 +12,6 @@ #define SC_BASE_ADDR 0x61840000 -/* PLL type: SSC */ -#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* LD11/20: CPU/ARM */ -#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* LD11/20: misc */ -#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* LD20: IPP */ -#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* LD11/20: Video codec */ -#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x1440) /* LD11 */ -#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* LD20: VPE etc. */ -#define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* LD20: GPU/Mali */ -#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1460) /* LD11: DDR memory */ -#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* LD20: DDR memory 0 */ -#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* LD20: DDR memory 1 */ -#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* LD20: DDR memory 2 */ - -/* PLL type: VPLL27 */ -#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) -#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) - -/* PLL type: DSPLL */ -#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) -#define SC_A2PLLCTRL (SC_BASE_ADDR | 0x15C0) - #define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) #define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) #define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index be0ae70..53872f6 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -36,7 +36,9 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_MMC_UNIPHIER=y +CONFIG_NAND=y CONFIG_NAND_DENALI=y +CONFIG_NAND_DENALI_DT=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y diff --git a/configs/uniphier_pro4_defconfig b/configs/uniphier_pro4_defconfig index 5ba8879..baec769 100644 --- a/configs/uniphier_pro4_defconfig +++ b/configs/uniphier_pro4_defconfig @@ -35,7 +35,9 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_MMC_UNIPHIER=y +CONFIG_NAND=y CONFIG_NAND_DENALI=y +CONFIG_NAND_DENALI_DT=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig index 22c2154..4ab56d8 100644 --- a/configs/uniphier_pxs2_ld6b_defconfig +++ b/configs/uniphier_pxs2_ld6b_defconfig @@ -36,7 +36,9 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_MMC_UNIPHIER=y +CONFIG_NAND=y CONFIG_NAND_DENALI=y +CONFIG_NAND_DENALI_DT=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index 066685f..f4e1835 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -31,6 +31,11 @@ CONFIG_I2C_EEPROM=y CONFIG_MMC_UNIPHIER=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_NAND=y +CONFIG_NAND_DENALI=y +CONFIG_NAND_DENALI_DT=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_USB=y diff --git a/drivers/clk/uniphier/Makefile b/drivers/clk/uniphier/Makefile index ed623aa..54c7e09 100644 --- a/drivers/clk/uniphier/Makefile +++ b/drivers/clk/uniphier/Makefile @@ -1,2 +1,3 @@ obj-y += clk-uniphier-core.o +obj-y += clk-uniphier-sys.o obj-y += clk-uniphier-mio.o diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c index eed21b9..722cd6b 100644 --- a/drivers/clk/uniphier/clk-uniphier-core.c +++ b/drivers/clk/uniphier/clk-uniphier-core.c @@ -146,6 +146,36 @@ static int uniphier_clk_probe(struct udevice *dev) } static const struct udevice_id uniphier_clk_match[] = { + /* System clock */ + { + .compatible = "socionext,uniphier-ld4-clock", + .data = (ulong)&uniphier_pxs2_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-pro4-clock", + .data = (ulong)&uniphier_pxs2_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-sld8-clock", + .data = (ulong)&uniphier_pxs2_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-pro5-clock", + .data = (ulong)&uniphier_pxs2_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-pxs2-clock", + .data = (ulong)&uniphier_pxs2_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-ld11-clock", + .data = (ulong)&uniphier_ld20_sys_clk_data, + }, + { + .compatible = "socionext,uniphier-ld20-clock", + .data = (ulong)&uniphier_ld20_sys_clk_data, + }, + /* Media I/O clock */ { .compatible = "socionext,uniphier-ld4-mio-clock", .data = (ulong)&uniphier_mio_clk_data, diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c new file mode 100644 index 0000000..709fa50 --- /dev/null +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2016-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "clk-uniphier.h" + +const struct uniphier_clk_gate_data uniphier_pxs2_sys_clk_gate[] = { + UNIPHIER_CLK_GATE(8, 0x2104, 10), /* stdmac */ + UNIPHIER_CLK_GATE(12, 0x2104, 6), /* gio (Pro4, Pro5) */ + UNIPHIER_CLK_GATE(14, 0x2104, 16), /* usb30 (Pro4, Pro5, PXs2) */ + UNIPHIER_CLK_GATE(15, 0x2104, 17), /* usb31 (Pro4, Pro5, PXs2) */ + UNIPHIER_CLK_GATE(16, 0x2104, 19), /* usb30-phy (PXs2) */ + UNIPHIER_CLK_GATE(20, 0x2104, 20), /* usb31-phy (PXs2) */ + UNIPHIER_CLK_END +}; + +const struct uniphier_clk_data uniphier_pxs2_sys_clk_data = { + .gate = uniphier_pxs2_sys_clk_gate, +}; + +const struct uniphier_clk_gate_data uniphier_ld20_sys_clk_gate[] = { + UNIPHIER_CLK_GATE(8, 0x210c, 8), /* stdmac */ + UNIPHIER_CLK_GATE(14, 0x210c, 14), /* usb30 (LD20) */ + UNIPHIER_CLK_GATE(16, 0x210c, 12), /* usb30-phy0 (LD20) */ + UNIPHIER_CLK_GATE(17, 0x210c, 13), /* usb30-phy1 (LD20) */ + UNIPHIER_CLK_END +}; + +const struct uniphier_clk_data uniphier_ld20_sys_clk_data = { + .gate = uniphier_ld20_sys_clk_gate, +}; diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h index f9a560e..770a322 100644 --- a/drivers/clk/uniphier/clk-uniphier.h +++ b/drivers/clk/uniphier/clk-uniphier.h @@ -50,6 +50,8 @@ struct uniphier_clk_data { .rates = {(_reg),}, \ } +extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data; +extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data; extern const struct uniphier_clk_data uniphier_mio_clk_data; #endif /* __CLK_UNIPHIER_H__ */ diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index c1a2e9f..0685b68 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -627,3 +627,15 @@ int ofnode_read_resource(ofnode node, uint index, struct resource *res) return 0; } } + +int ofnode_read_resource_byname(ofnode node, const char *name, + struct resource *res) +{ + int index; + + index = ofnode_stringlist_search(node, "reg-names", name); + if (index < 0) + return index; + + return ofnode_read_resource(node, index, res); +} diff --git a/drivers/core/read.c b/drivers/core/read.c index fe40bed..6acb333 100644 --- a/drivers/core/read.c +++ b/drivers/core/read.c @@ -164,3 +164,9 @@ int dev_read_resource(struct udevice *dev, uint index, struct resource *res) { return ofnode_read_resource(dev_ofnode(dev), index, res); } + +int dev_read_resource_byname(struct udevice *dev, const char *name, + struct resource *res) +{ + return ofnode_read_resource_byname(dev_ofnode(dev), name, res); +} diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 71d678f..85b26d6 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -16,6 +16,13 @@ config NAND_DENALI help Enable support for the Denali NAND controller. +config NAND_DENALI_DT + bool "Support Denali NAND controller as a DT device" + depends on NAND_DENALI && OF_CONTROL && DM + help + Enable the driver for NAND flash on platforms using a Denali NAND + controller as a DT device. + config SYS_NAND_DENALI_64BIT bool "Use 64-bit variant of Denali NAND controller" depends on NAND_DENALI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index c3d4a99..9f7d9d6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_NAND_DENALI) += denali.o +obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 18280b0..47cf37d 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1175,7 +1175,7 @@ static void denali_hw_init(struct denali_nand_info *denali) static struct nand_ecclayout nand_oob; -static int denali_init(struct denali_nand_info *denali) +int denali_init(struct denali_nand_info *denali) { struct mtd_info *mtd = nand_to_mtd(&denali->nand); int ret; @@ -1273,6 +1273,7 @@ fail: return ret; } +#ifndef CONFIG_NAND_DENALI_DT static int __board_nand_init(void) { struct denali_nand_info *denali; @@ -1296,3 +1297,4 @@ void board_nand_init(void) if (__board_nand_init() < 0) pr_warn("Failed to initialize Denali NAND controller.\n"); } +#endif diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 0e098bd..694bce5 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -464,4 +464,6 @@ struct denali_nand_info { uint32_t max_banks; }; +int denali_init(struct denali_nand_info *denali); + #endif /* __DENALI_H__ */ diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c new file mode 100644 index 0000000..0a6155c --- /dev/null +++ b/drivers/mtd/nand/denali_dt.c @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <linux/io.h> +#include <linux/ioport.h> + +#include "denali.h" + +static const struct udevice_id denali_nand_dt_ids[] = { + { + .compatible = "altr,socfpga-denali-nand", + }, + { + .compatible = "socionext,uniphier-denali-nand-v5a", + }, + { + .compatible = "socionext,uniphier-denali-nand-v5b", + }, + { /* sentinel */ } +}; + +static int denali_dt_probe(struct udevice *dev) +{ + struct denali_nand_info *denali = dev_get_priv(dev); + struct resource res; + int ret; + + ret = dev_read_resource_byname(dev, "denali_reg", &res); + if (ret) + return ret; + + denali->flash_reg = devm_ioremap(dev, res.start, resource_size(&res)); + + ret = dev_read_resource_byname(dev, "nand_data", &res); + if (ret) + return ret; + + denali->flash_mem = devm_ioremap(dev, res.start, resource_size(&res)); + + return denali_init(denali); +} + +U_BOOT_DRIVER(denali_nand_dt) = { + .name = "denali-nand-dt", + .id = UCLASS_MISC, + .of_match = denali_nand_dt_ids, + .probe = denali_dt_probe, + .priv_auto_alloc_size = sizeof(struct denali_nand_info), +}; + +void board_nand_init(void) +{ + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(denali_nand_dt), + &dev); + if (ret && ret != -ENODEV) + printf("Failed to initialize Denali NAND controller. (error %d)\n", + ret); +} diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c index ebb2cae..c74d16f 100644 --- a/drivers/reset/reset-uniphier.c +++ b/drivers/reset/reset-uniphier.c @@ -77,6 +77,17 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = { UNIPHIER_RESET_END, }; +static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = { + UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */ + UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */ + UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */ + UNIPHIER_RESETX(12, 0x200c, 5), /* USB30 (GIO0) */ + UNIPHIER_RESETX(13, 0x200c, 6), /* USB31 (GIO1) */ + UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY */ + UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY */ + UNIPHIER_RESET_END, +}; + /* Media I/O reset data */ #define UNIPHIER_MIO_RESET_SD(id, ch) \ UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0) @@ -268,6 +279,10 @@ static const struct udevice_id uniphier_reset_match[] = { .compatible = "socionext,uniphier-ld20-reset", .data = (ulong)uniphier_ld20_sys_reset_data, }, + { + .compatible = "socionext,uniphier-pxs3-reset", + .data = (ulong)uniphier_pxs3_sys_reset_data, + }, /* Media I/O reset */ { .compatible = "socionext,uniphier-ld4-mio-reset", @@ -294,7 +309,15 @@ static const struct udevice_id uniphier_reset_match[] = { .data = (ulong)uniphier_mio_reset_data, }, { - .compatible = "socionext,uniphier-ld20-mio-reset", + .compatible = "socionext,uniphier-ld11-sd-reset", + .data = (ulong)uniphier_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-sd-reset", + .data = (ulong)uniphier_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs3-sd-reset", .data = (ulong)uniphier_mio_reset_data, }, /* Peripheral reset */ @@ -326,6 +349,10 @@ static const struct udevice_id uniphier_reset_match[] = { .compatible = "socionext,uniphier-ld20-peri-reset", .data = (ulong)uniphier_pro4_peri_reset_data, }, + { + .compatible = "socionext,uniphier-pxs3-peri-reset", + .data = (ulong)uniphier_pro4_peri_reset_data, + }, { /* sentinel */ } }; diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 9a64063..884e59c 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -83,7 +83,6 @@ #endif #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_NAND_DENALI_ECC_SIZE 1024 @@ -91,8 +90,6 @@ #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) - #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index 210ddb2..de2769e 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -625,5 +625,7 @@ int ofnode_read_simple_size_cells(ofnode node); bool ofnode_pre_reloc(ofnode node); int ofnode_read_resource(ofnode node, uint index, struct resource *res); +int ofnode_read_resource_byname(ofnode node, const char *name, + struct resource *res); #endif diff --git a/include/dm/read.h b/include/dm/read.h index c3a4a56..49d69c9 100644 --- a/include/dm/read.h +++ b/include/dm/read.h @@ -359,13 +359,24 @@ int dev_read_enabled(struct udevice *dev); /** * dev_read_resource() - obtain an indexed resource from a device. * - * @dev: devuce to examine + * @dev: device to examine * @index index of the resource to retrieve (0 = first) * @res returns the resource * @return 0 if ok, negative on error */ int dev_read_resource(struct udevice *dev, uint index, struct resource *res); +/** + * dev_read_resource_byname() - obtain a named resource from a device. + * + * @dev: device to examine + * @name: name of the resource to retrieve + * @res: returns the resource + * @return 0 if ok, negative on error + */ +int dev_read_resource_byname(struct udevice *dev, const char *name, + struct resource *res); + #else /* CONFIG_DM_DEV_READ_INLINE is enabled */ static inline int dev_read_u32_default(struct udevice *dev, @@ -513,6 +524,13 @@ static inline int dev_read_resource(struct udevice *dev, uint index, return ofnode_read_resource(dev_ofnode(dev), index, res); } +static inline int dev_read_resource_byname(struct udevice *dev, + const char *name, + struct resource *res) +{ + return ofnode_read_resource_byname(dev_ofnode(dev), name, res); +} + #endif /* CONFIG_DM_DEV_READ_INLINE */ /** |