aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/riscv/include/asm/arch-generic/gpio.h35
-rw-r--r--arch/riscv/include/asm/gpio.h6
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/sifive-gpio.c177
5 files changed, 226 insertions, 0 deletions
diff --git a/arch/riscv/include/asm/arch-generic/gpio.h b/arch/riscv/include/asm/arch-generic/gpio.h
new file mode 100644
index 0000000..dfcb753
--- /dev/null
+++ b/arch/riscv/include/asm/arch-generic/gpio.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 SiFive, Inc.
+ */
+
+#ifndef _GPIO_SIFIVE_H
+#define _GPIO_SIFIVE_H
+
+#define GPIO_INPUT_VAL 0x00
+#define GPIO_INPUT_EN 0x04
+#define GPIO_OUTPUT_EN 0x08
+#define GPIO_OUTPUT_VAL 0x0C
+#define GPIO_RISE_IE 0x18
+#define GPIO_RISE_IP 0x1C
+#define GPIO_FALL_IE 0x20
+#define GPIO_FALL_IP 0x24
+#define GPIO_HIGH_IE 0x28
+#define GPIO_HIGH_IP 0x2C
+#define GPIO_LOW_IE 0x30
+#define GPIO_LOW_IP 0x34
+#define GPIO_OUTPUT_XOR 0x40
+
+#define NR_GPIOS 16
+
+enum gpio_state {
+ LOW,
+ HIGH
+};
+
+/* Details about a GPIO bank */
+struct sifive_gpio_platdata {
+ void *base; /* address of registers in physical memory */
+};
+
+#endif /* _GPIO_SIFIVE_H */
diff --git a/arch/riscv/include/asm/gpio.h b/arch/riscv/include/asm/gpio.h
new file mode 100644
index 0000000..008d756
--- /dev/null
+++ b/arch/riscv/include/asm/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 SiFive, Inc.
+ */
+
+#include <asm-generic/gpio.h>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f2dabb5..39f2c7e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -285,6 +285,13 @@ config STM32_GPIO
usable on many stm32 families like stm32f4/f7/h7 and stm32mp1.
Tested on STM32F7.
+config SIFIVE_GPIO
+ bool "SiFive GPIO driver"
+ depends on DM_GPIO
+ help
+ Device model driver for GPIO controller present in SiFive FU540 SoC. This
+ driver enables GPIO interface on HiFive Unleashed A00 board.
+
config MVEBU_GPIO
bool "Marvell MVEBU GPIO driver"
depends on DM_GPIO && ARCH_MVEBU
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4a8aa0f..ccc49e2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_PM8916_GPIO) += pm8916_gpio.o
obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o
obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o
+obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
diff --git a/drivers/gpio/sifive-gpio.c b/drivers/gpio/sifive-gpio.c
new file mode 100644
index 0000000..76d5a1d3
--- /dev/null
+++ b/drivers/gpio/sifive-gpio.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SiFive GPIO driver
+ *
+ * Copyright (C) 2019 SiFive, Inc.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/gpio.h>
+
+static int sifive_gpio_probe(struct udevice *dev)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ char name[18], *str;
+
+ sprintf(name, "gpio@%4lx_", (uintptr_t)plat->base);
+ str = strdup(name);
+ if (!str)
+ return -ENOMEM;
+ uc_priv->bank_name = str;
+
+ /*
+ * Use the gpio count mentioned in device tree,
+ * if not specified in dt, set NR_GPIOS as default
+ */
+ uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", NR_GPIOS);
+
+ return 0;
+}
+
+static void sifive_update_gpio_reg(void *bptr, u32 offset, bool value)
+{
+ void __iomem *ptr = (void __iomem *)bptr;
+
+ u32 bit = BIT(offset);
+ u32 old = readl(ptr);
+
+ if (value)
+ writel(old | bit, ptr);
+ else
+ writel(old & ~bit, ptr);
+}
+
+static int sifive_gpio_direction_input(struct udevice *dev, u32 offset)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (offset > uc_priv->gpio_count)
+ return -EINVAL;
+
+ /* Configure gpio direction as input */
+ sifive_update_gpio_reg(plat->base + GPIO_INPUT_EN, offset, true);
+ sifive_update_gpio_reg(plat->base + GPIO_OUTPUT_EN, offset, false);
+
+ return 0;
+}
+
+static int sifive_gpio_direction_output(struct udevice *dev, u32 offset,
+ int value)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (offset > uc_priv->gpio_count)
+ return -EINVAL;
+
+ /* Configure gpio direction as output */
+ sifive_update_gpio_reg(plat->base + GPIO_OUTPUT_EN, offset, true);
+ sifive_update_gpio_reg(plat->base + GPIO_INPUT_EN, offset, false);
+
+ /* Set the output state of the pin */
+ sifive_update_gpio_reg(plat->base + GPIO_OUTPUT_VAL, offset, value);
+
+ return 0;
+}
+
+static int sifive_gpio_get_value(struct udevice *dev, u32 offset)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ int val;
+ int dir;
+
+ if (offset > uc_priv->gpio_count)
+ return -EINVAL;
+
+ /* Get direction of the pin */
+ dir = !(readl(plat->base + GPIO_OUTPUT_EN) & BIT(offset));
+
+ if (dir)
+ val = readl(plat->base + GPIO_INPUT_VAL) & BIT(offset);
+ else
+ val = readl(plat->base + GPIO_OUTPUT_VAL) & BIT(offset);
+
+ return val ? HIGH : LOW;
+}
+
+static int sifive_gpio_set_value(struct udevice *dev, u32 offset, int value)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (offset > uc_priv->gpio_count)
+ return -EINVAL;
+
+ sifive_update_gpio_reg(plat->base + GPIO_OUTPUT_VAL, offset, value);
+
+ return 0;
+}
+
+static int sifive_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ u32 outdir, indir, val;
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (offset > uc_priv->gpio_count)
+ return -1;
+
+ /* Get direction of the pin */
+ outdir = readl(plat->base + GPIO_OUTPUT_EN) & BIT(offset);
+ indir = readl(plat->base + GPIO_INPUT_EN) & BIT(offset);
+
+ if (outdir)
+ /* Pin at specified offset is configured as output */
+ val = GPIOF_OUTPUT;
+ else if (indir)
+ /* Pin at specified offset is configured as input */
+ val = GPIOF_INPUT;
+ else
+ /*The requested GPIO is not set as input or output */
+ val = GPIOF_UNUSED;
+
+ return val;
+}
+
+static const struct udevice_id sifive_gpio_match[] = {
+ { .compatible = "sifive,gpio0" },
+ { }
+};
+
+static const struct dm_gpio_ops sifive_gpio_ops = {
+ .direction_input = sifive_gpio_direction_input,
+ .direction_output = sifive_gpio_direction_output,
+ .get_value = sifive_gpio_get_value,
+ .set_value = sifive_gpio_set_value,
+ .get_function = sifive_gpio_get_function,
+};
+
+static int sifive_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->base = (void *)addr;
+ return 0;
+}
+
+U_BOOT_DRIVER(gpio_sifive) = {
+ .name = "gpio_sifive",
+ .id = UCLASS_GPIO,
+ .of_match = sifive_gpio_match,
+ .ofdata_to_platdata = of_match_ptr(sifive_gpio_ofdata_to_platdata),
+ .platdata_auto_alloc_size = sizeof(struct sifive_gpio_platdata),
+ .ops = &sifive_gpio_ops,
+ .probe = sifive_gpio_probe,
+};