diff options
-rw-r--r-- | drivers/gpio/pca953x_gpio.c | 50 |
1 files changed, 40 insertions, 10 deletions
diff --git a/drivers/gpio/pca953x_gpio.c b/drivers/gpio/pca953x_gpio.c index dc8911a..e98e1e5 100644 --- a/drivers/gpio/pca953x_gpio.c +++ b/drivers/gpio/pca953x_gpio.c @@ -35,6 +35,12 @@ #define PCA953X_INVERT 2 #define PCA953X_DIRECTION 3 +#define PCA957X_INPUT 0 +#define PCA957X_OUTPUT 5 +#define PCA957X_INVERT 1 +#define PCA957X_DIRECTION 4 + + #define PCA_GPIO_MASK 0x00FF #define PCA_INT 0x0100 #define PCA953X_TYPE 0x1000 @@ -50,8 +56,29 @@ enum { #define MAX_BANK 5 #define BANK_SZ 8 +struct pca95xx_reg { + int input; + int output; + int invert; + int direction; +}; + +static const struct pca95xx_reg pca953x_regs = { + .direction = PCA953X_DIRECTION, + .output = PCA953X_OUTPUT, + .input = PCA953X_INPUT, + .invert = PCA953X_INVERT, +}; + +static const struct pca95xx_reg pca957x_regs = { + .direction = PCA957X_DIRECTION, + .output = PCA957X_OUTPUT, + .input = PCA957X_INPUT, + .invert = PCA957X_INVERT, +}; + /* - * struct pca953x_info - Data for pca953x + * struct pca953x_info - Data for pca953x/pca957x * * @dev: udevice structure for the device * @addr: i2c slave address @@ -61,6 +88,7 @@ enum { * @bank_count: the number of banks that the device supports * @reg_output: array to hold the value of output registers * @reg_direction: array to hold the value of direction registers + * @regs: struct to hold the registers addresses */ struct pca953x_info { struct udevice *dev; @@ -71,6 +99,7 @@ struct pca953x_info { int bank_count; u8 reg_output[MAX_BANK]; u8 reg_direction[MAX_BANK]; + const struct pca95xx_reg *regs; }; static int pca953x_write_single(struct udevice *dev, int reg, u8 val, @@ -171,12 +200,13 @@ static int pca953x_is_output(struct udevice *dev, int offset) static int pca953x_get_value(struct udevice *dev, uint offset) { + struct pca953x_info *info = dev_get_plat(dev); int ret; u8 val = 0; int off = offset % BANK_SZ; - ret = pca953x_read_single(dev, PCA953X_INPUT, &val, offset); + ret = pca953x_read_single(dev, info->regs->input, &val, offset); if (ret) return ret; @@ -196,7 +226,7 @@ static int pca953x_set_value(struct udevice *dev, uint offset, int value) else val = info->reg_output[bank] & ~(1 << off); - ret = pca953x_write_single(dev, PCA953X_OUTPUT, val, offset); + ret = pca953x_write_single(dev, info->regs->output, val, offset); if (ret) return ret; @@ -218,7 +248,7 @@ static int pca953x_set_direction(struct udevice *dev, uint offset, int dir) else val = info->reg_direction[bank] & ~(1 << off); - ret = pca953x_write_single(dev, PCA953X_DIRECTION, val, offset); + ret = pca953x_write_single(dev, info->regs->direction, val, offset); if (ret) return ret; @@ -296,14 +326,14 @@ static int pca953x_probe(struct udevice *dev) } info->chip_type = PCA_CHIP_TYPE(driver_data); - if (info->chip_type != PCA953X_TYPE) { - dev_err(dev, "Only support PCA953X chip type now.\n"); - return -EINVAL; - } + if (info->chip_type == PCA953X_TYPE) + info->regs = &pca953x_regs; + else + info->regs = &pca957x_regs; info->bank_count = DIV_ROUND_UP(info->gpio_count, BANK_SZ); - ret = pca953x_read_regs(dev, PCA953X_OUTPUT, info->reg_output); + ret = pca953x_read_regs(dev, info->regs->output, info->reg_output); if (ret) { dev_err(dev, "Error reading output register\n"); return ret; @@ -327,7 +357,7 @@ static int pca953x_probe(struct udevice *dev) /* Clear the polarity registers to no invert */ memset(val, 0, MAX_BANK); - ret = pca953x_write_regs(dev, PCA953X_INVERT, val); + ret = pca953x_write_regs(dev, info->regs->invert, val); if (ret < 0) { dev_err(dev, "Error writing invert register\n"); return ret; |