diff options
| -rw-r--r-- | board/abilis/tb100/Makefile | 7 | ||||
| -rw-r--r-- | board/abilis/tb100/tb100.c | 23 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | include/configs/tb100.h | 123 |
4 files changed, 154 insertions, 0 deletions
diff --git a/board/abilis/tb100/Makefile b/board/abilis/tb100/Makefile new file mode 100644 index 0000000..4f273b3 --- /dev/null +++ b/board/abilis/tb100/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2014 Pierrick Hascoet, Abilis Systems +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += tb100.o diff --git a/board/abilis/tb100/tb100.c b/board/abilis/tb100/tb100.c new file mode 100644 index 0000000..ff3632f --- /dev/null +++ b/board/abilis/tb100/tb100.c @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2014 Pierrick Hascoet, Abilis Systems + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> + +void reset_cpu(ulong addr) +{ +#define CRM_SWRESET 0xff101044 + writel(0x1, (void *)CRM_SWRESET); +} + +int board_eth_init(bd_t *bis) +{ + if (designware_initialize(ETH0_BASE_ADDRESS, 0) >= 0) + return 1; + + return 0; +} @@ -47,6 +47,7 @@ Active aarch64 armv8 - armltd vexpress64 Active arc arc700 - synopsys - axs101 - Alexey Brodkin <abrodkin@synopsys.com> Active arc arc700 - synopsys <none> arcangel4 - Alexey Brodkin <abrodkin@synopsys.com> Active arc arc700 - synopsys <none> arcangel4-be - Alexey Brodkin <abrodkin@synopsys.com> +Active arc arc700 - abilis - tb100 - Alexey Brodkin <abrodkin@synopsys.com> Active arm arm1136 - armltd integrator integratorcp_cm1136 integratorcp:CM1136 Linus Walleij <linus.walleij@linaro.org> Active arm arm1136 mx31 - - imx31_phycore - - Active arm arm1136 mx31 davedenx - qong - Wolfgang Denk <wd@denx.de> diff --git a/include/configs/tb100.h b/include/configs/tb100.h new file mode 100644 index 0000000..8a861a8 --- /dev/null +++ b/include/configs/tb100.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_TB100_H_ +#define _CONFIG_TB100_H_ + +#include <linux/sizes.h> + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CLK_FREQ 500000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x84000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE SZ_128M + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN SZ_128K +#define CONFIG_SYS_BOOTM_LEN SZ_32M +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 166666666 +#define CONFIG_SYS_NS16550_COM1 0xFF100000 +#define CONFIG_SYS_NS16550_MEM32 + +#define CONFIG_BAUDRATE 115200 + +/* + * Ethernet PHY configuration + */ +#define CONFIG_PHYLIB +#define CONFIG_PHY_GIGE + +/* + * Even though the board houses Realtek RTL8211E PHY + * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly. + * In particular "parse_status" reports link is down. + * + * Until Realtek PHY driver is fixed fall back to generic PHY driver + * which implements all required functionality and behaves much more stable. + * + * #define CONFIG_PHY_REALTEK + * + */ + +/* + * Ethernet configuration + */ +#define CONFIG_DESIGNWARE_ETH +#define ETH0_BASE_ADDRESS 0xFE100000 +#define ETH1_BASE_ADDRESS 0xFE110000 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE SZ_2K +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "[tb100]:~# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_TB100_H_ */ |