diff options
| -rw-r--r-- | drivers/mtd/spi/spi-nor-core.c | 26 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 11 |
2 files changed, 17 insertions, 20 deletions
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 3f5f3c8..9120f86 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -331,7 +331,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy, u8 *val) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDAR, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1), SPI_MEM_OP_DUMMY(dummy / 8, 1), SPI_MEM_OP_DATA_IN(1, NULL, 1)); @@ -342,7 +342,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy, static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRAR, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1), SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, NULL, 1)); @@ -714,7 +714,7 @@ static int set_4byte(struct spi_nor *nor, const struct flash_info *info, */ static int spansion_sr_ready(struct spi_nor *nor, u32 addr_base, u8 dummy) { - u32 reg_addr = addr_base + SPINOR_REG_ADDR_STR1V; + u32 reg_addr = addr_base + SPINOR_REG_CYPRESS_STR1V; u8 sr; int ret; @@ -1856,7 +1856,7 @@ static int macronix_quad_enable(struct spi_nor *nor) static int spansion_quad_enable_volatile(struct spi_nor *nor, u32 addr_base, u8 dummy) { - u32 addr = addr_base + SPINOR_REG_ADDR_CFR1V; + u32 addr = addr_base + SPINOR_REG_CYPRESS_CFR1V; u8 cr; int ret; @@ -3293,11 +3293,11 @@ static int s25fs_s_setup(struct spi_nor *nor, const struct flash_info *info, * Read CR3V to check if uniform sector is selected. If not, assign an * erase hook that supports non-uniform erase. */ - ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V, + ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V, S25FS_S_RDAR_DUMMY, &cfr3v); if (ret) return ret; - if (!(cfr3v & CFR3V_UNHYSA)) + if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_UNISECT)) nor->erase = s25fs_s_erase_non_uniform; return spi_nor_default_setup(nor, info, params); @@ -3396,7 +3396,8 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info, * uniform 128KB only due to complexity of non-uniform layout. */ if (nor->info->id[4] == S25FS256T_ID4) { - ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_ARCFN, 8, &cr); + ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_ARCFN, 8, + &cr); if (ret) return ret; @@ -3410,10 +3411,10 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info, * Read CFR3V to check if uniform sector is selected. If not, assign an * erase hook that supports non-uniform erase. */ - ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V, 0, &cr); + ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V, 0, &cr); if (ret) return ret; - if (!(cr & CFR3V_UNHYSA)) + if (!(cr & SPINOR_REG_CYPRESS_CFR3_UNISECT)) nor->erase = s25_erase_non_uniform; /* @@ -3474,12 +3475,13 @@ static int s25_post_bfpt_fixup(struct spi_nor *nor, * dies are configured to 512B buffer. */ for (addr = 0; addr < params->size; addr += SZ_128M) { - ret = spansion_read_any_reg(nor, addr + SPINOR_REG_ADDR_CFR3V, - 0, &cfr3v); + ret = spansion_read_any_reg(nor, + addr + SPINOR_REG_CYPRESS_CFR3V, 0, + &cfr3v); if (ret) return ret; - if (!(cfr3v & CFR3V_PGMBUF)) { + if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_PGSZ)) { params->page_size = 256; return 0; } diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 2861b73..f9a55c8 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -136,14 +136,6 @@ #define SPINOR_OP_BRRD 0x16 /* Bank register read */ #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ #define SPINOR_OP_EX4B_CYPRESS 0xB8 /* Exit 4-byte mode */ -#define SPINOR_OP_RDAR 0x65 /* Read any register */ -#define SPINOR_OP_WRAR 0x71 /* Write any register */ -#define SPINOR_REG_ADDR_STR1V 0x00800000 -#define SPINOR_REG_ADDR_CFR1V 0x00800002 -#define SPINOR_REG_ADDR_CFR3V 0x00800004 -#define SPINOR_REG_ADDR_ARCFN 0x00000006 -#define CFR3V_UNHYSA BIT(3) /* Uniform sectors or not */ -#define CFR3V_PGMBUF BIT(4) /* Program buffer size */ /* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ @@ -189,6 +181,9 @@ #define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ #define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ #define SPINOR_OP_S28_SE_4K 0x21 +#define SPINOR_REG_CYPRESS_ARCFN 0x00000006 +#define SPINOR_REG_CYPRESS_STR1V 0x00800000 +#define SPINOR_REG_CYPRESS_CFR1V 0x00800002 #define SPINOR_REG_CYPRESS_CFR2V 0x00800003 #define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24 0xb #define SPINOR_REG_CYPRESS_CFR3V 0x00800004 |