mtd: spi-nor-core: Clean up macros for Infineon(Cypress) S25 and S28

Some macro definitions used in Infineon(Cypress) S25 and S28 series are
redundant and some have inconsistent prefix. This patch removes
redundant ones and renames some to have same prefix as others.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

2 files changed, 17 insertions, 20 deletions

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 3f5f3c8..9120f86 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -331,7 +331,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy,
 				 u8 *val)
 {
 	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDAR, 1),
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1),
 			   SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
 			   SPI_MEM_OP_DUMMY(dummy / 8, 1),
 			   SPI_MEM_OP_DATA_IN(1, NULL, 1));
@@ -342,7 +342,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy,
 static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val)
 {
 	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRAR, 1),
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1),
 			   SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
 			   SPI_MEM_OP_NO_DUMMY,
 			   SPI_MEM_OP_DATA_OUT(1, NULL, 1));
@@ -714,7 +714,7 @@ static int set_4byte(struct spi_nor *nor, const struct flash_info *info,
  */
 static int spansion_sr_ready(struct spi_nor *nor, u32 addr_base, u8 dummy)
 {
-	u32 reg_addr = addr_base + SPINOR_REG_ADDR_STR1V;
+	u32 reg_addr = addr_base + SPINOR_REG_CYPRESS_STR1V;
 	u8 sr;
 	int ret;
 
@@ -1856,7 +1856,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
 static int spansion_quad_enable_volatile(struct spi_nor *nor, u32 addr_base,
 					 u8 dummy)
 {
-	u32 addr = addr_base + SPINOR_REG_ADDR_CFR1V;
+	u32 addr = addr_base + SPINOR_REG_CYPRESS_CFR1V;
 
 	u8 cr;
 	int ret;
@@ -3293,11 +3293,11 @@ static int s25fs_s_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * Read CR3V to check if uniform sector is selected. If not, assign an
 	 * erase hook that supports non-uniform erase.
 	 */
-	ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V,
+	ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V,
 				    S25FS_S_RDAR_DUMMY, &cfr3v);
 	if (ret)
 		return ret;
-	if (!(cfr3v & CFR3V_UNHYSA))
+	if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_UNISECT))
 		nor->erase = s25fs_s_erase_non_uniform;
 
 	return spi_nor_default_setup(nor, info, params);
@@ -3396,7 +3396,8 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * uniform 128KB only due to complexity of non-uniform layout.
 	 */
 	if (nor->info->id[4] == S25FS256T_ID4) {
-		ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_ARCFN, 8, &cr);
+		ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_ARCFN, 8,
+					    &cr);
 		if (ret)
 			return ret;
 
@@ -3410,10 +3411,10 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * Read CFR3V to check if uniform sector is selected. If not, assign an
 	 * erase hook that supports non-uniform erase.
 	 */
-	ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V, 0, &cr);
+	ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V, 0, &cr);
 	if (ret)
 		return ret;
-	if (!(cr & CFR3V_UNHYSA))
+	if (!(cr & SPINOR_REG_CYPRESS_CFR3_UNISECT))
 		nor->erase = s25_erase_non_uniform;
 
 	/*
@@ -3474,12 +3475,13 @@ static int s25_post_bfpt_fixup(struct spi_nor *nor,
 	 * dies are configured to 512B buffer.
 	 */
 	for (addr = 0; addr < params->size; addr += SZ_128M) {
-		ret = spansion_read_any_reg(nor, addr + SPINOR_REG_ADDR_CFR3V,
-					    0, &cfr3v);
+		ret = spansion_read_any_reg(nor,
+					    addr + SPINOR_REG_CYPRESS_CFR3V, 0,
+					    &cfr3v);
 		if (ret)
 			return ret;
 
-		if (!(cfr3v & CFR3V_PGMBUF)) {
+		if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_PGSZ)) {
 			params->page_size = 256;
 			return 0;
 		}
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 2861b73..f9a55c8 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -136,14 +136,6 @@
 #define SPINOR_OP_BRRD		0x16	/* Bank register read */
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 #define SPINOR_OP_EX4B_CYPRESS	0xB8	/* Exit 4-byte mode */
-#define SPINOR_OP_RDAR		0x65	/* Read any register */
-#define SPINOR_OP_WRAR		0x71	/* Write any register */
-#define SPINOR_REG_ADDR_STR1V	0x00800000
-#define SPINOR_REG_ADDR_CFR1V	0x00800002
-#define SPINOR_REG_ADDR_CFR3V	0x00800004
-#define SPINOR_REG_ADDR_ARCFN	0x00000006
-#define CFR3V_UNHYSA		BIT(3)	/* Uniform sectors or not */
-#define CFR3V_PGMBUF		BIT(4)	/* Program buffer size */
 
 /* Used for Micron flashes only. */
 #define SPINOR_OP_RD_EVCR	0x65	/* Read EVCR register */
@@ -189,6 +181,9 @@
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
 #define SPINOR_OP_S28_SE_4K			0x21
+#define SPINOR_REG_CYPRESS_ARCFN		0x00000006
+#define SPINOR_REG_CYPRESS_STR1V		0x00800000
+#define SPINOR_REG_CYPRESS_CFR1V		0x00800002
 #define SPINOR_REG_CYPRESS_CFR2V		0x00800003
 #define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR3V		0x00800004