diff options
31 files changed, 5847 insertions, 89 deletions
@@ -2,6 +2,8 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Add support for AMCC 440SPe CPU based eval board (Yucca). + * Call serial_initialize() before first debug() is used. * Changes to Yellowstone & Yosemite 440EP/GR eval boards: @@ -74,7 +74,7 @@ LIST_4xx=" \ PLU405 PMC405 PPChameleonEVB sbc405 \ VOH405 VOM405 W7OLMC W7OLMG \ walnut WUH405 XPEDITE1K yellowstone \ - yosemite \ + yosemite yucca \ " ######################################################################### @@ -922,6 +922,9 @@ yosemite_config: unconfig yellowstone_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc +yucca_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc + ######################################################################### ## MPC8220 Systems ######################################################################### diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile new file mode 100644 index 0000000..c85fa31 --- /dev/null +++ b/board/amcc/yucca/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o cmd_yucca.o +SOBJS = init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c new file mode 100644 index 0000000..9c7afb2 --- /dev/null +++ b/board/amcc/yucca/cmd_yucca.c @@ -0,0 +1,288 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * hacked for evb440spe + */ + +#include <common.h> +#include <command.h> +#include "yucca.h" +#include <i2c.h> +#include <asm/byteorder.h> + +extern void print_evb440spe_info(void); +static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, + int flag, int argc, char *argv[]); + +extern int cmd_get_data_size(char* arg, int default_size); + +/* ------------------------------------------------------------------------- */ +int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + return setBootStrapClock (cmdtp, 1, flag, argc, argv); +} + +/* ------------------------------------------------------------------------- */ +/* Modify memory. + * + * Syntax: + * evb440spe wrclk prom0,prom1 + */ +static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, + int argc, char *argv[]) +{ + uchar chip; + ulong data; + int nbytes; + extern char console_buffer[]; + + char sysClock[4]; + char cpuClock[4]; + char plbClock[4]; + char pcixClock[4]; + + if (argc < 3) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp(argv[2], "prom0") == 0) + chip = IIC0_BOOTPROM_ADDR; + else + chip = IIC0_ALT_BOOTPROM_ADDR; + + do { + printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n"); + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if ((strcmp(console_buffer, "33") != 0) & + (strcmp(console_buffer, "66") != 0)) + nbytes=0; + + strcpy(sysClock, console_buffer); + + } while (nbytes == 0); + + do { + if (strcmp(sysClock, "66") == 0) { + printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n"); + } else { +#ifdef CONFIG_STRESS + printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n"); +#else + printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n"); +#endif + } + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if (strcmp(sysClock, "66") == 0) { + if ((strcmp(console_buffer, "400") != 0) & + (strcmp(console_buffer, "533") != 0) +#ifdef CONFIG_STRESS + & (strcmp(console_buffer, "667") != 0) +#endif + ) { + nbytes = 0; + } + } else { + if ((strcmp(console_buffer, "400") != 0) & + (strcmp(console_buffer, "500") != 0) & + (strcmp(console_buffer, "533") != 0) +#ifdef CONFIG_STRESS + & (strcmp(console_buffer, "667") != 0) +#endif + ) { + nbytes = 0; + } + } + + strcpy(cpuClock, console_buffer); + + } while (nbytes == 0); + + if (strcmp(cpuClock, "500") == 0){ + strcpy(plbClock, "166"); + } else if (strcmp(cpuClock, "533") == 0){ + strcpy(plbClock, "133"); + } else { + do { + if (strcmp(cpuClock, "400") == 0) + printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n"); + +#ifdef CONFIG_STRESS + if (strcmp(cpuClock, "667") == 0) + printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n"); + +#endif + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if (strcmp(cpuClock, "400") == 0) { + if ((strcmp(console_buffer, "100") != 0) & + (strcmp(console_buffer, "133") != 0)) + nbytes = 0; + } +#ifdef CONFIG_STRESS + if (strcmp(cpuClock, "667") == 0) { + if ((strcmp(console_buffer, "133") != 0) & + (strcmp(console_buffer, "166") != 0)) + nbytes = 0; + } +#endif + strcpy(plbClock, console_buffer); + + } while (nbytes == 0); + } + + do { + printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n"); + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if ((strcmp(console_buffer, "33") != 0) & + (strcmp(console_buffer, "66") != 0) & + (strcmp(console_buffer, "100") != 0) & + (strcmp(console_buffer, "133") != 0)) { + nbytes = 0; + } + strcpy(pcixClock, console_buffer); + + } while (nbytes == 0); + + printf("\nsys clk = %sMhz\n", sysClock); + printf("cpu clk = %sMhz\n", cpuClock); + printf("plb clk = %sMhz\n", plbClock); + printf("Pci-X clk = %sMhz\n", pcixClock); + + do { + printf("\npress [y] to write I2C bootstrap \n"); + printf("or [n] to abort. \n"); + printf("Don't forget to set board switches \n"); + printf("according to your choice before re-starting \n"); + printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n"); + + nbytes = readline (" ? "); + if (strcmp(console_buffer, "n") == 0) + return 0; + + } while (nbytes == 0); + + if (strcmp(sysClock, "33") == 0) { + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "100") == 0)) + data = 0x8678c206; + + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x8678c2c6; + + if ((strcmp(cpuClock, "500") == 0)) + data = 0x8778f2c6; + + if ((strcmp(cpuClock, "533") == 0)) + data = 0x87790252; + +#ifdef CONFIG_STRESS + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x87794256; + + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "166") == 0)) + data = 0x87794206; + +#endif + } + if (strcmp(sysClock, "66") == 0) { + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "100") == 0)) + data = 0x84706206; + + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x847062c6; + + if ((strcmp(cpuClock, "533") == 0)) + data = 0x85708206; + +#ifdef CONFIG_STRESS + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x8570a256; + + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "166") == 0)) + data = 0x8570a206; + +#endif + } + +#ifdef DEBUG + printf(" pin strap0 to write in i2c = %x\n", data); +#endif /* DEBUG */ + + if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0) + printf("Error writing strap0 in %s\n", argv[2]); + + if (strcmp(pcixClock, "33") == 0) + data = 0x00000701; + + if (strcmp(pcixClock, "66") == 0) + data = 0x00000601; + + if (strcmp(pcixClock, "100") == 0) + data = 0x00000501; + + if (strcmp(pcixClock, "133") == 0) + data = 0x00000401; + + if (strcmp(plbClock, "166") == 0) + data = data | 0x05950000; + else + data = data | 0x05A50000; + +#ifdef DEBUG + printf(" pin strap1 to write in i2c = %x\n", data); +#endif /* DEBUG */ + + udelay(1000); + if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0) + printf("Error writing strap1 in %s\n", argv[2]); + + return 0; +} + +U_BOOT_CMD( + evb440spe, 3, 1, do_evb440spe, + "evb440spe - program the serial device strap\n", + "wrclk [prom0|prom1] - program the serial device strap\n" +); diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk new file mode 100644 index 0000000..ff454eb --- /dev/null +++ b/board/amcc/yucca/config.mk @@ -0,0 +1,42 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AMCC 440SPe Reference Platform (yucca) board +# + +ifeq ($(ramsym),1) +TEXT_BASE = 0x07FD0000 +else +TEXT_BASE = 0xfffb0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c new file mode 100644 index 0000000..c5a2e31 --- /dev/null +++ b/board/amcc/yucca/flash.c @@ -0,0 +1,1054 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 Jun Gu <jung@artesyncp.com> + * Add support for Am29F016D and dynamic switch setting. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <ppc440.h> +#include "yucca.h" + +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* + * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0 + */ +static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { + {0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */ + {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */ + {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */ + {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/ + {0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/ + {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */ + {0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */ + {0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */ + {0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */ +}; + +/* + * include common flash code (for amcc boards) + */ +/*----------------------------------------------------------------------- + * Functions + */ +static int write_word(flash_info_t * info, ulong dest, ulong data); +#ifdef CFG_FLASH_2ND_16BIT_DEV +static int write_word_1(flash_info_t * info, ulong dest, ulong data); +static int write_word_2(flash_info_t * info, ulong dest, ulong data); +static int flash_erase_1(flash_info_t * info, int s_first, int s_last); +static int flash_erase_2(flash_info_t * info, int s_first, int s_last); +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); +#endif + +void flash_print_info(flash_info_t * info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf("AMD "); + break; + case FLASH_MAN_STM: + printf("STM "); + break; + case FLASH_MAN_FUJ: + printf("FUJITSU "); + break; + case FLASH_MAN_SST: + printf("SST "); + break; + case FLASH_MAN_MX: + printf("MIXC "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + printf("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_AM400B: + printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: + printf("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: + printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: + printf("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AMD016: + printf("AM29F016D (16 Mbit, uniform sector size)\n"); + break; + case FLASH_AM160B: + printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: + printf("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: + printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: + printf("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_AM033C: + printf("AM29LV033C (32 Mbit, top boot sector)\n"); + break; + case FLASH_SST800A: + printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); + break; + case FLASH_SST160A: + printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); + break; + case FLASH_STMW320DT: + printf ("M29W320DT (32 M, top sector)\n"); + break; + case FLASH_MXLV320T: + printf ("MXLV320T (32 Mbit, top sector)\n"); + break; + default: + printf("Unknown Chip Type\n"); + break; + } + + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k = 0; k < size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); + } + printf("\n"); + return; +} + + +/* + * The following code cannot be run from FLASH! + */ +#ifdef CFG_FLASH_2ND_16BIT_DEV +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +{ + /* bit 0 used for big flash marking */ + if ((ulong)addr & 0x1) + return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info); + else + return flash_get_size_1(addr, info); +} + +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) +#else +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +#endif +{ + short i; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return (info->size); +} + +static int wait_for_DQ7_1(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +#ifdef CFG_FLASH_2ND_16BIT_DEV +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { + return flash_erase_2(info, s_first, s_last); + } else { + return flash_erase_1(info, s_first, s_last); + } +} + +static int flash_erase_1(flash_info_t * info, int s_first, int s_last) +#else +int flash_erase(flash_info_t * info, int s_first, int s_last) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!", prot); + + printf("\n"); + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_1(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + for (; i < 4 && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < 4; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_word(info, wp, data)) != 0) + return (rc); + + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i = 0; i < 4; ++i) + data = (data << 8) | *src++; + + if ((rc = write_word(info, wp, data)) != 0) + return (rc); + + wp += 4; + cnt -= 4; + } + + if (cnt == 0) + return (0); + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < 4; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +#ifdef CFG_FLASH_2ND_16BIT_DEV +static int write_word(flash_info_t * info, ulong dest, ulong data) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { + return write_word_2(info, dest, data); + } else { + return write_word_1(info, dest, data); + } +} + +static int write_word_1(flash_info_t * info, ulong dest, ulong data) +#else +static int write_word(flash_info_t * info, ulong dest, ulong data) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i, flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) + return (2); + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) + return (1); + } + } + + return (0); +} + +#ifdef CFG_FLASH_2ND_16BIT_DEV + +#undef CFG_FLASH_WORD_SIZE +#define CFG_FLASH_WORD_SIZE unsigned short + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) +{ + short i; + int n; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + case (CFG_FLASH_WORD_SIZE) MX_MANUFACT: + info->flash_id = FLASH_MAN_MX; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: + info->flash_id += FLASH_AM320T; + info->sector_count = 71; + info->size = 0x00400000; + break; /* => 4 MB */ + case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: + info->flash_id += FLASH_AM320B; + info->sector_count = 71; + info->size = 0x00400000; + break; /* => 4 MB */ + case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT: + info->flash_id += FLASH_STMW320DT; + info->sector_count = 67; + info->size = 0x00400000; + break; /* => 4 MB */ + case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T: + info->flash_id += FLASH_MXLV320T; + info->sector_count = 71; + info->size = 0x00400000; + break; /* => 4 MB */ + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) { + /* set sector offsets for top boot block type */ + base += info->size; + i = info->sector_count; + /* 1 x 16k boot sector */ + base -= 16 << 10; + --i; + info->start[i] = base; + /* 2 x 8k boot sectors */ + for (n = 0; n < 2; ++n) { + base -= 8 << 10; + --i; + info->start[i] = base; + } + /* 1 x 32k boot sector */ + base -= 32 << 10; + --i; + info->start[i] = base; + + while (i > 0) { /* 64k regular sectors */ + base -= 64 << 10; + --i; + info->start[i] = base; + } + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) { + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00002000; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + info->start[i--] = base + info->size - 0x0000a000; + info->start[i--] = base + info->size - 0x0000c000; + info->start[i--] = base + info->size - 0x0000e000; + info->start[i--] = base + info->size - 0x00010000; + + for (; i >= 0; i--) + info->start[i] = base + i * 0x00010000; + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + + for (i = 4; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000) - 0x00030000; + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + + for (; i >= 0; i--) + info->start[i] = base + i * 0x00010000; + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return (info->size); +} + +static int wait_for_DQ7_2(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +static int flash_erase_2(flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!", prot); + + printf("\n"); + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_2(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +static int write_word_2(flash_info_t * info, ulong dest, ulong data) +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) + return (2); + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) + return (1); + } + } + + return (0); +} +#endif /* CFG_FLASH_2ND_16BIT_DEV */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(vu_long * addr, flash_info_t * info); +static int write_word(flash_info_t * info, ulong dest, ulong data); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init(void) +{ + unsigned long total_b = 0; + unsigned long size_b[CFG_MAX_FLASH_BANKS]; + unsigned short index = 0; + int i; + unsigned long val; + unsigned long ebc_boot_size; + unsigned long boot_selection; + + mfsdr(sdr_pstrp0, val); + index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28; + + if ((index == 0xc) || (index == 8)) { + /* + * Boot Settings in IIC EEprom address 0xA8 or 0xA0 + * Read Serial Device Strap Register1 in PPC440SPe + */ + mfsdr(sdr_sdstp1, val); + boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK; + ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK; + + switch(boot_selection) { + case SDR0_SDSTP1_BOOT_SEL_EBC: + switch(ebc_boot_size) { + case SDR0_SDSTP1_EBC_ROM_BS_16BIT: + index = 3; + break; + case SDR0_SDSTP1_EBC_ROM_BS_8BIT: + index = 0; + break; + } + break; + + case SDR0_SDSTP1_BOOT_SEL_PCI: + index = 1; + break; + + } + } /*else if (index == 0) {*/ +/* if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/ +/* index = 8;*//* sram below op code flash -> new index 8*/ +/* }*/ + + DEBUGF("\n"); + DEBUGF("FLASH: Index: %d\n", index); + + /* Init: no FLASHes known */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + + /* check whether the address is 0 */ + if (flash_addr_table[index][i] == 0) + continue; + + /* call flash_get_size() to initialize sector address */ + size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], + &flash_info[i]); + + flash_info[i].size = size_b[i]; + + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", + i, size_b[i], size_b[i] << 20); + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + } + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + &flash_info[i]); +#if defined(CFG_ENV_IS_IN_FLASH) + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[i]); +#if defined(CFG_ENV_ADDR_REDUND) + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + &flash_info[i]); +#endif +#endif + total_b += flash_info[i].size; + } + + return total_b; +} diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S new file mode 100644 index 0000000..8cf2636 --- /dev/null +++ b/board/amcc/yucca/init.S @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* port to AMCC 440SPE evaluatioon board - SG April 12,2005 */ + +#include <ppc_asm.tmpl> +#include <config.h> + +/* General */ +#define TLB_VALID 0x00000200 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID )) +#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn)) +#define TLB2(a) ((a) & 0x00000fbf) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ;\ +0: mflr r0 ;\ + mtlr r1 ;\ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G) + + tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + + tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CFG_FPGA_BASE,SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I) + + tlbentry(CFG_OPER_FLASH,SZ_16M,0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbtab_end + diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds new file mode 100644 index 0000000..9df4f92 --- /dev/null +++ b/board/amcc/yucca/u-boot.lds @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/amcc/yucca/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/yucca/u-boot.lds.debug b/board/amcc/yucca/u-boot.lds.debug new file mode 100644 index 0000000..474f922 --- /dev/null +++ b/board/amcc/yucca/u-boot.lds.debug @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2002-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/amcc/yucca/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* common/environment.o(.text) */ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c new file mode 100644 index 0000000..8fb4cfa --- /dev/null +++ b/board/amcc/yucca/yucca.c @@ -0,0 +1,1100 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Port to AMCC-440SPE Evaluation Board SOP - April 2005 + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <i2c.h> +#include "yucca.h" + +void fpga_init (void); + +void get_sys_info(PPC440_SYS_INFO *board_cfg ); +int compare_to_true(char *str ); +char *remove_l_w_space(char *in_str ); +char *remove_t_w_space(char *in_str ); +int get_console_port(void); +unsigned long ppcMfcpr(unsigned long cpr_reg); +unsigned long ppcMfsdr(unsigned long sdr_reg); + +#define DEBUG_ENV +#ifdef DEBUG_ENV +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif + +#define FALSE 0 +#define TRUE 1 + +int board_early_init_f (void) +{ +/*----------------------------------------------------------------------------+ +| Define Boot devices ++----------------------------------------------------------------------------*/ +#define BOOT_FROM_SMALL_FLASH 0x00 +#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 +#define BOOT_FROM_PCI 0x02 +#define BOOT_DEVICE_UNKNOWN 0x03 + +/*----------------------------------------------------------------------------+ +| EBC Devices Characteristics +| Peripheral Bank Access Parameters - EBC_BxAP +| Peripheral Bank Configuration Register - EBC_BxCR ++----------------------------------------------------------------------------*/ + +/* + * Small Flash and FRAM + * BU Value + * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 + * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 + */ +#define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +/* + * Large Flash and SRAM + * BU Value + * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 + * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 +*/ +#define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +/* + * FPGA + * BU value : + * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 + * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 + */ +#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(11) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(10) | \ + EBC_BXAP_OEN_ENCODE(1) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(1) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_RW | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + + unsigned long mfr; + /* + * Define Variables for EBC initialization depending on BOOTSTRAP option + */ + unsigned long sdr0_pinstp, sdr0_sdstp1 ; + unsigned long bootstrap_settings, ebc_data_width, boot_selection; + int computed_boot_device = BOOT_DEVICE_UNKNOWN; + + /*-------------------------------------------------------------------+ + | Initialize EBC CONFIG - + | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + | default value : + | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + | + +-------------------------------------------------------------------*/ + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | + EBC_CFG_RTC_16PERCLK | + EBC_CFG_ATC_PREVIOUS | + EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | + EBC_CFG_OEO_PREVIOUS | + EBC_CFG_EMC_DEFAULT | + EBC_CFG_PME_DISABLE | + EBC_CFG_PR_16); + + /*-------------------------------------------------------------------+ + | + | PART 1 : Initialize EBC Bank 1 + | ============================== + | Bank1 is always associated to the EPLD. + | It has to be initialized prior to other banks settings computation + | since some board registers values may be needed to determine the + | boot type + | + +-------------------------------------------------------------------*/ + mtebc(pb1ap, EBC_BXAP_FPGA); + mtebc(pb1cr, EBC_BXCR_FPGA_CS1); + + /*-------------------------------------------------------------------+ + | + | PART 2 : Determine which boot device was selected + | ================================================= + | + | Read Pin Strap Register in PPC440SPe + | Result can either be : + | - Boot strap = boot from EBC 8bits => Small Flash + | - Boot strap = boot from PCI + | - Boot strap = IIC + | In case of boot from IIC, read Serial Device Strap Register1 + | + | Result can either be : + | - Boot from EBC - EBC Bus Width = 8bits => Small Flash + | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM + | - Boot from PCI + | + +-------------------------------------------------------------------*/ + /* Read Pin Strap Register in PPC440SP */ + sdr0_pinstp = ppcMfsdr(SDR0_PINSTP); + bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK; + + switch (bootstrap_settings) { + case SDR0_PINSTP_BOOTSTRAP_SETTINGS0: + /* + * Strapping Option A + * Boot from EBC - 8 bits , Small Flash + */ + computed_boot_device = BOOT_FROM_SMALL_FLASH; + break; + case SDR0_PINSTP_BOOTSTRAP_SETTINGS1: + /* + * Strappping Option B + * Boot from PCI + */ + computed_boot_device = BOOT_FROM_PCI; + break; + case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN: + case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN: + /* + * Strapping Option C or D + * Boot Settings in IIC EEprom address 0x50 or 0x54 + * Read Serial Device Strap Register1 in PPC440SPe + */ + sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1); + boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK; + ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK; + + switch (boot_selection) { + case SDR0_SDSTP1_ERPN_EBC: + switch (ebc_data_width) { + case SDR0_SDSTP1_EBCW_16_BITS: + computed_boot_device = + BOOT_FROM_LARGE_FLASH_OR_SRAM; + break; + case SDR0_SDSTP1_EBCW_8_BITS : + computed_boot_device = BOOT_FROM_SMALL_FLASH; + break; + } + break; + + case SDR0_SDSTP1_ERPN_PCI: + computed_boot_device = BOOT_FROM_PCI; + break; + default: + /* should not occure */ + computed_boot_device = BOOT_DEVICE_UNKNOWN; + } + break; + default: + /* should not be */ + computed_boot_device = BOOT_DEVICE_UNKNOWN; + break; + } + + /*-------------------------------------------------------------------+ + | + | PART 3 : Compute EBC settings depending on selected boot device + | ====== ====================================================== + | + | Resulting EBC init will be among following configurations : + | + | - Boot from EBC 8bits => boot from Small Flash selected + | EBC-CS0 = Small Flash + | EBC-CS2 = Large Flash and SRAM + | + | - Boot from EBC 16bits => boot from Large Flash or SRAM + | EBC-CS0 = Large Flash or SRAM + | EBC-CS2 = Small Flash + | + | - Boot from PCI + | EBC-CS0 = not initialized to avoid address contention + | EBC-CS2 = same as boot from Small Flash selected + | + +-------------------------------------------------------------------*/ + unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; + unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; + + switch (computed_boot_device) { + /*-------------------------------------------------------------------*/ + case BOOT_FROM_PCI: + /*-------------------------------------------------------------------*/ + /* + * By Default CS2 is affected to LARGE Flash + * do not initialize SMALL FLASH to avoid address contention + * Large Flash + */ + ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; + ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_SMALL_FLASH: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH; + ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0; + + /* + * Large Flash or SRAM + */ + /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */ + ebc0_cs2_bxap_value = 0x048ff240; + ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_LARGE_FLASH_OR_SRAM: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH; + ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0; + + /* Small flash */ + ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH; + ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + default: + /*-------------------------------------------------------------------*/ + /* BOOT_DEVICE_UNKNOWN */ + break; + } + + mtebc(pb0ap, ebc0_cs0_bxap_value); + mtebc(pb0cr, ebc0_cs0_bxcr_value); + mtebc(pb2ap, ebc0_cs2_bxap_value); + mtebc(pb2cr, ebc0_cs2_bxcr_value); + + /*--------------------------------------------------------------------+ + | Interrupt controller setup for the AMCC 440SPe Evaluation board. + +--------------------------------------------------------------------+ + +---------------------------------------------------------------------+ + |Interrupt| Source | Pol. | Sensi.| Crit. | + +---------+-----------------------------------+-------+-------+-------+ + | IRQ 00 | UART0 | High | Level | Non | + | IRQ 01 | UART1 | High | Level | Non | + | IRQ 02 | IIC0 | High | Level | Non | + | IRQ 03 | IIC1 | High | Level | Non | + | IRQ 04 | PCI0X0 MSG IN | High | Level | Non | + | IRQ 05 | PCI0X0 CMD Write | High | Level | Non | + | IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | + | IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | + | IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | + | IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | + | IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | + | IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | + | IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | + | IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | + | IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | + | IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | + | IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | + | IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | + | IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | + | IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | + | IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | + | IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | + | IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | + | IRQ 23 | I2O Inbound Doorbell | High | Level | Non | + | IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | + | IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | + | IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | + | IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | + | IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | + | IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | + | IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | + | IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | + |---------------------------------------------------------------------- + | IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | + | IRQ 33 | MAL Serr | High | Level | Non | + | IRQ 34 | MAL Txde | High | Level | Non | + | IRQ 35 | MAL Rxde | High | Level | Non | + | IRQ 36 | DMC CE or DMC UE | High | Level | Non | + | IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | + | IRQ 38 | MAL TX EOB | High | Level | Non | + | IRQ 39 | MAL RX EOB | High | Level | Non | + | IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | + | IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | + | IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | + | IRQ 43 | L2 Cache | Risin | Edge | Non | + | IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | + | IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | + | IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | + | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + | IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | + | IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | + | IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | + | IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + | IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | + | IRQ 54 | DMA Error | High | Level | Non | + | IRQ 55 | DMA I2O Error | High | Level | Non | + | IRQ 56 | Serial ROM | High | Level | Non | + | IRQ 57 | PCIX0 Error | High | Edge | Non | + | IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | + | IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | + | IRQ 60 | EMAC0 Interrupt | High | Level | Non | + | IRQ 61 | EMAC0 Wake-up | High | Level | Non | + | IRQ 62 | Reserved | High | Level | Non | + | IRQ 63 | XOR | High | Level | Non | + |---------------------------------------------------------------------- + | IRQ 64 | PE0 AL | High | Level | Non | + | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + | IRQ 68 | PE0 TCR | High | Level | Non | + | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + | IRQ 70 | PE0 DCR Error | High | Level | Non | + | IRQ 71 | Reserved | N/A | N/A | Non | + | IRQ 72 | PE1 AL | High | Level | Non | + | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + | IRQ 76 | PE1 TCR | High | Level | Non | + | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + | IRQ 78 | PE1 DCR Error | High | Level | Non | + | IRQ 79 | Reserved | N/A | N/A | Non | + | IRQ 80 | PE2 AL | High | Level | Non | + | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + | IRQ 84 | PE2 TCR | High | Level | Non | + | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + | IRQ 86 | PE2 DCR Error | High | Level | Non | + | IRQ 87 | Reserved | N/A | N/A | Non | + | IRQ 88 | External IRQ(5) | Progr | Progr | Non | + | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + | IRQ 94 | Reserved | N/A | N/A | Non | + | IRQ 95 | Reserved | N/A | N/A | Non | + |--------------------------------------------------------------------- + | IRQ 96 | PE0 INTA | High | Level | Non | + | IRQ 97 | PE0 INTB | High | Level | Non | + | IRQ 98 | PE0 INTC | High | Level | Non | + | IRQ 99 | PE0 INTD | High | Level | Non | + | IRQ 100 | PE1 INTA | High | Level | Non | + | IRQ 101 | PE1 INTB | High | Level | Non | + | IRQ 102 | PE1 INTC | High | Level | Non | + | IRQ 103 | PE1 INTD | High | Level | Non | + | IRQ 104 | PE2 INTA | High | Level | Non | + | IRQ 105 | PE2 INTB | High | Level | Non | + | IRQ 106 | PE2 INTC | High | Level | Non | + | IRQ 107 | PE2 INTD | Risin | Edge | Non | + | IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | + | IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | + | IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | + | IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | + | IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | + | IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | + | IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | + | IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | + | IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | + | IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | + | IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | + | IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | + | IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | + | IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | + | IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | + | IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | + | IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | + | IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | + | IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | + | IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | + +---------+-----------------------------------+-------+-------+------*/ + /*--------------------------------------------------------------------+ + | Put UICs in PowerPC440SPemode. + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic3er, 0x00000000); /* disable all interrupts */ + mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic3sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic2er, 0x00000000); /* disable all interrupts */ + mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */ + mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic1er, 0x00000000); /* disable all interrupts */ + mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */ + mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted + * cascade to be checked */ + mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ + mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + + /* SDR0_MFR should be part of Ethernet init */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ECS_MASK; + /*mtsdr(sdr_mfr, mfr);*/ + fpga_init(); + + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + + get_sys_info (&sysinfo); + + printf ("Board: AMCC 440SPe Evaluation Board\n"); + printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000); + printf ("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000); + printf ("\tDDR: %lu MHz\n", sysinfo.freqDDR / 1000000); + return 0; +} + +static long int yucca_probe_for_dimms(void) +{ + long int dimm_installed[MAXDIMMS]; + long int dimm_num, probe_result; + long int dimms_found = 0; + uchar dimm_addr = IIC0_DIMM0_ADDR; + + for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { + /* check if there is a chip at the dimm address */ + switch (dimm_num) { + case 0: + dimm_addr = IIC0_DIMM0_ADDR; + break; + case 1: + dimm_addr = IIC0_DIMM1_ADDR; + break; + } + probe_result = i2c_probe(dimm_addr); + + if (probe_result == 0) { + dimm_installed[dimm_num] = TRUE; + dimms_found++; + debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num); + } else { + dimm_installed[dimm_num] = FALSE; + debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num); + } + } + + if (dimms_found == 0) { + printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); + hang(); + } + + if (dimm_installed[0] != TRUE) { + printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n"); + printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n"); + hang(); + } + + return dimms_found; +} + +/************************************************************************* + * init SDRAM controller with fixed value + * the initialization values are for 2x MICRON DDR2 + * PN: MT18HTF6472DY-53EB2 + * 512MB, DDR2, 533, CL4, ECC, REG + ************************************************************************/ +static long int fixed_sdram(void) +{ + long int yucca_dimms = 0; + + yucca_dimms = yucca_probe_for_dimms(); + + /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */ + mtdcr( 0x10, 0x00000021 ); + mtdcr( 0x11, 0x84000000 ); + + /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */ + mtdcr( 0x10, 0x00000020 ); + mtdcr( 0x11, 0x2D122000 ); + + /* SET MCIF0_CODT Die Termination On */ + mtdcr( 0x10, 0x00000026 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x2A800021 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x02800021 ); + + /* On-Die Termination for Bank 0 */ + mtdcr( 0x10, 0x00000022 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x18000000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x06000000 ); + + /* On-Die Termination for Bank 1 */ + mtdcr( 0x10, 0x00000023 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x18000000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x01800000 ); + + /* On-Die Termination for Bank 2 */ + mtdcr( 0x10, 0x00000024 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x01800000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* On-Die Termination for Bank 3 */ + mtdcr( 0x10, 0x00000025 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x01800000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* Refresh Time register (0x30) Refresh every 7.8125uS */ + mtdcr( 0x10, 0x00000030 ); + mtdcr( 0x11, 0x08200000 ); + + /* SET MCIF0_MMODE CL 4 */ + mtdcr( 0x10, 0x00000088 ); + mtdcr( 0x11, 0x00000642 ); + + /* MCIF0_MEMODE */ + mtdcr( 0x10, 0x00000089 ); + mtdcr( 0x11, 0x00000004 ); + + /*SET MCIF0_MB0CF */ + mtdcr( 0x10, 0x00000040 ); + mtdcr( 0x11, 0x00000201 ); + + /* SET MCIF0_MB1CF */ + mtdcr( 0x10, 0x00000044 ); + mtdcr( 0x11, 0x00000201 ); + + /* SET MCIF0_MB2CF */ + mtdcr( 0x10, 0x00000048 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x00000201 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* SET MCIF0_MB3CF */ + mtdcr( 0x10, 0x0000004c ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x00000201 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* SET MCIF0_INITPLR0 # NOP */ + mtdcr( 0x10, 0x00000050 ); + mtdcr( 0x11, 0xB5380000 ); + + /* SET MCIF0_INITPLR1 # PRE */ + mtdcr( 0x10, 0x00000051 ); + mtdcr( 0x11, 0x82100400 ); + + /* SET MCIF0_INITPLR2 # EMR2 */ + mtdcr( 0x10, 0x00000052 ); + mtdcr( 0x11, 0x80820000 ); + + /* SET MCIF0_INITPLR3 # EMR3 */ + mtdcr( 0x10, 0x00000053 ); + mtdcr( 0x11, 0x80830000 ); + + /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */ + mtdcr( 0x10, 0x00000054 ); + mtdcr( 0x11, 0x80810000 ); + + /* SET MCIF0_INITPLR5 # MR DLL RESET */ + mtdcr( 0x10, 0x00000055 ); + mtdcr( 0x11, 0x80800542 ); + + /* SET MCIF0_INITPLR6 # PRE */ + mtdcr( 0x10, 0x00000056 ); + mtdcr( 0x11, 0x82100400 ); + + /* SET MCIF0_INITPLR7 # Refresh */ + mtdcr( 0x10, 0x00000057 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR8 # Refresh */ + mtdcr( 0x10, 0x00000058 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR9 # Refresh */ + mtdcr( 0x10, 0x00000059 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR10 # Refresh */ + mtdcr( 0x10, 0x0000005A ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR11 # MR */ + mtdcr( 0x10, 0x0000005B ); + mtdcr( 0x11, 0x80800442 ); + + /* SET MCIF0_INITPLR12 # EMR OCD Default*/ + mtdcr( 0x10, 0x0000005C ); + mtdcr( 0x11, 0x80810380 ); + + /* SET MCIF0_INITPLR13 # EMR OCD Exit */ + mtdcr( 0x10, 0x0000005D ); + mtdcr( 0x11, 0x80810000 ); + + /* 0x80: Adv Addr clock by 180 deg */ + mtdcr( 0x10, 0x00000080 ); + mtdcr( 0x11, 0x80000000 ); + + /* 0x21: Exit self refresh, set DC_EN */ + mtdcr( 0x10, 0x00000021 ); + mtdcr( 0x11, 0x28000000 ); + + /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */ + mtdcr( 0x10, 0x00000081 ); + mtdcr( 0x11, 0x80000800 ); + + /* MCIF0_SDTR1 */ + mtdcr( 0x10, 0x00000085 ); + mtdcr( 0x11, 0x80201000 ); + + /* MCIF0_SDTR2 */ + mtdcr( 0x10, 0x00000086 ); + mtdcr( 0x11, 0x42103242 ); + + /* MCIF0_SDTR3 */ + mtdcr( 0x10, 0x00000087 ); + mtdcr( 0x11, 0x0C100D14 ); + + /* SET MQ0_B0BAS base addr 00000000 / 256MB */ + mtdcr( 0x40, 0x0000F800 ); + + /* SET MQ0_B1BAS base addr 10000000 / 256MB */ + mtdcr( 0x41, 0x0400F800 ); + + /* SET MQ0_B2BAS base addr 20000000 / 256MB */ + if (yucca_dimms == 2) + mtdcr( 0x42, 0x0800F800 ); + else if (yucca_dimms == 1) + mtdcr( 0x42, 0x00000000 ); + + /* SET MQ0_B3BAS base addr 30000000 / 256MB */ + if (yucca_dimms == 2) + mtdcr( 0x43, 0x0C00F800 ); + else if (yucca_dimms == 1) + mtdcr( 0x43, 0x00000000 ); + + /* SDRAM_RQDC */ + mtdcr( 0x10, 0x00000070 ); + mtdcr( 0x11, 0x8000003F ); + + /* SDRAM_RDCC */ + mtdcr( 0x10, 0x00000078 ); + mtdcr( 0x11, 0x80000000 ); + + /* SDRAM_RFDC */ + mtdcr( 0x10, 0x00000074 ); + mtdcr( 0x11, 0x00000220 ); + + return (yucca_dimms * 512) << 20; +} + +long int initdram (int board_type) +{ + long dram_size = 0; + + dram_size = fixed_sdram(); + + return dram_size; +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*-------------------------------------------------------------------+ + * The yucca board is always configured as the host & requires the + * PCI arbiter to be enabled. + *-------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*-------------------------------------------------------------------+ + * Disable everything + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*-------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options to not support sizes such as 128/256 MB. + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIX0_BAR0, 0 ); + + /*-------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *-------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The yucca board is always configured as host. */ + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +int misc_init_f (void) +{ + uint reg; +#if defined(CONFIG_STRESS) + uint i ; + uint disp; +#endif + + out16(FPGA_REG10, (in16(FPGA_REG10) & + ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) | + FPGA_REG10_10MHZ_ENABLE | + FPGA_REG10_100MHZ_ENABLE | + FPGA_REG10_GIGABIT_ENABLE | + FPGA_REG10_FULL_DUPLEX ); + + udelay(10000); /* wait 10ms */ + + out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH)); + + /* minimal init for PCIe */ + /* pci express 0 Endpoint Mode */ + mfsdr(SDR0_PE0DLPSET, reg); + reg &= (~0x00400000); + mtsdr(SDR0_PE0DLPSET, reg); + /* pci express 1 Rootpoint Mode */ + mfsdr(SDR0_PE1DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE1DLPSET, reg); + /* pci express 2 Rootpoint Mode */ + mfsdr(SDR0_PE2DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE2DLPSET, reg); + + out16(FPGA_REG1C,(in16 (FPGA_REG1C) & + ~FPGA_REG1C_PE0_ROOTPOINT & + ~FPGA_REG1C_PE1_ENDPOINT & + ~FPGA_REG1C_PE2_ENDPOINT)); + +#if defined(CONFIG_STRESS) + /* + * all this setting done by linux only needed by stress an charac. test + * procedure + * PCIe 1 Rootpoint PCIe2 Endpoint + * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 8; i++, disp += 3) { + mfsdr(SDR0_PE0HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE0HSSSET1L0 + disp, reg); + } + + /* + * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 4; i++, disp += 3) { + mfsdr(SDR0_PE1HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE1HSSSET1L0 + disp, reg); + } + + /* + * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 4; i++, disp += 3) { + mfsdr(SDR0_PE2HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE2HSSSET1L0 + disp, reg); + } + + reg = 0x21242222; + mtsdr(SDR0_PE2UTLSET1, reg); + reg = 0x11000000; + mtsdr(SDR0_PE2UTLSET2, reg); + /* pci express 1 Endpoint Mode */ + reg = 0x00004000; + mtsdr(SDR0_PE2DLPSET, reg); + + mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */ +#endif + return 0; +} + +void fpga_init(void) +{ + /* + * by default sdram access is disabled by fpga + */ + out16(FPGA_REG10, (in16 (FPGA_REG10) | + FPGA_REG10_SDRAM_ENABLE | + FPGA_REG10_ENABLE_DISPLAY )); + + return; +} + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif + +/*---------------------------------------------------------------------------+ + | onboard_pci_arbiter_selected => from EPLD + +---------------------------------------------------------------------------*/ +int onboard_pci_arbiter_selected(int core_pci) +{ +#if 0 + unsigned long onboard_pci_arbiter_sel; + + onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK; + + if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL) + return (BOARD_OPTION_SELECTED); + else +#endif + return (BOARD_OPTION_NOT_SELECTED); +} + +/*---------------------------------------------------------------------------+ + | ppcMfcpr. + +---------------------------------------------------------------------------*/ +unsigned long ppcMfcpr(unsigned long cpr_reg) +{ + unsigned long msr; + unsigned long cpr_cfgaddr_temp; + unsigned long cpr_value; + + msr = (mfmsr () & ~(MSR_EE)); + cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR); + mtdcr(CPR0_CFGADDR, cpr_reg); + cpr_value = mfdcr(CPR0_CFGDATA); + mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp); + mtmsr(msr); + + return (cpr_value); +} + +/*----------------------------------------------------------------------------+ +| Indirect Access of the System DCR's (SDR) +| ppcMfsdr ++----------------------------------------------------------------------------*/ +unsigned long ppcMfsdr(unsigned long sdr_reg) +{ + unsigned long msr; + unsigned long sdr_cfgaddr_temp; + unsigned long sdr_value; + + msr = (mfmsr () & ~(MSR_EE)); + sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR); + mtdcr(SDR0_CFGADDR, sdr_reg); + sdr_value = mfdcr(SDR0_CFGDATA); + mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp); + mtmsr(msr); + + return (sdr_value); +} + diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h new file mode 100644 index 0000000..91caee8 --- /dev/null +++ b/board/amcc/yucca/yucca.h @@ -0,0 +1,382 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __YUCCA_H_ +#define __YUCCA_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------------------------+ +| Defines ++----------------------------------------------------------------------------*/ + +#define TMR_FREQ_EXT 25000000 +#define BOARD_UART_CLOCK 11059200 + +#define BOARD_OPTION_SELECTED 1 +#define BOARD_OPTION_NOT_SELECTED 0 + +#define ENGINEERING_CLOCK_CHECKING "clk_chk" +#define ENGINEERING_EXTERNAL_CLOCK "ext_clk" + +#define ENGINEERING_CLOCK_CHECKING_DATA 1 +#define ENGINEERING_EXTERNAL_CLOCK_DATA 2 + +/* ethernet definition */ +#define MAX_ENETMODE_PARM 3 +#define ENETMODE_NEG 0 +#define ENETMODE_SPEED 1 +#define ENETMODE_DUPLEX 2 + +#define ENETMODE_AUTONEG 0 +#define ENETMODE_NO_AUTONEG 1 +#define ENETMODE_10 2 +#define ENETMODE_100 3 +#define ENETMODE_1000 4 +#define ENETMODE_HALF 5 +#define ENETMODE_FULL 6 + +#define NUM_TLB_ENTRIES 64 + +/*----------------------------------------------------------------------------+ +| TLB specific defines. ++----------------------------------------------------------------------------*/ +#define TLB_256MB_ALIGN_MASK 0xF0000000 +#define TLB_16MB_ALIGN_MASK 0xFF000000 +#define TLB_1MB_ALIGN_MASK 0xFFF00000 +#define TLB_256KB_ALIGN_MASK 0xFFFC0000 +#define TLB_64KB_ALIGN_MASK 0xFFFF0000 +#define TLB_16KB_ALIGN_MASK 0xFFFFC000 +#define TLB_4KB_ALIGN_MASK 0xFFFFF000 +#define TLB_1KB_ALIGN_MASK 0xFFFFFC00 +#define TLB_256MB_SIZE 0x10000000 +#define TLB_16MB_SIZE 0x01000000 +#define TLB_1MB_SIZE 0x00100000 +#define TLB_256KB_SIZE 0x00040000 +#define TLB_64KB_SIZE 0x00010000 +#define TLB_16KB_SIZE 0x00004000 +#define TLB_4KB_SIZE 0x00001000 +#define TLB_1KB_SIZE 0x00000400 + +#define TLB_WORD0_EPN_MASK 0xFFFFFC00 +#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD0_V_MASK 0x00000200 +#define TLB_WORD0_V_ENABLE 0x00000200 +#define TLB_WORD0_V_DISABLE 0x00000000 +#define TLB_WORD0_TS_MASK 0x00000100 +#define TLB_WORD0_TS_1 0x00000100 +#define TLB_WORD0_TS_0 0x00000000 +#define TLB_WORD0_SIZE_MASK 0x000000F0 +#define TLB_WORD0_SIZE_1KB 0x00000000 +#define TLB_WORD0_SIZE_4KB 0x00000010 +#define TLB_WORD0_SIZE_16KB 0x00000020 +#define TLB_WORD0_SIZE_64KB 0x00000030 +#define TLB_WORD0_SIZE_256KB 0x00000040 +#define TLB_WORD0_SIZE_1MB 0x00000050 +#define TLB_WORD0_SIZE_16MB 0x00000070 +#define TLB_WORD0_SIZE_256MB 0x00000090 +#define TLB_WORD0_TPAR_MASK 0x0000000F +#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) +#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) + +#define TLB_WORD1_RPN_MASK 0xFFFFFC00 +#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD1_PAR1_MASK 0x00000300 +#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) +#define TLB_WORD1_PAR1_0 0x00000000 +#define TLB_WORD1_PAR1_1 0x00000100 +#define TLB_WORD1_PAR1_2 0x00000200 +#define TLB_WORD1_PAR1_3 0x00000300 +#define TLB_WORD1_ERPN_MASK 0x0000000F +#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) +#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) + +#define TLB_WORD2_PAR2_MASK 0xC0000000 +#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) +#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) +#define TLB_WORD2_PAR2_0 0x00000000 +#define TLB_WORD2_PAR2_1 0x40000000 +#define TLB_WORD2_PAR2_2 0x80000000 +#define TLB_WORD2_PAR2_3 0xC0000000 +#define TLB_WORD2_U0_MASK 0x00008000 +#define TLB_WORD2_U0_ENABLE 0x00008000 +#define TLB_WORD2_U0_DISABLE 0x00000000 +#define TLB_WORD2_U1_MASK 0x00004000 +#define TLB_WORD2_U1_ENABLE 0x00004000 +#define TLB_WORD2_U1_DISABLE 0x00000000 +#define TLB_WORD2_U2_MASK 0x00002000 +#define TLB_WORD2_U2_ENABLE 0x00002000 +#define TLB_WORD2_U2_DISABLE 0x00000000 +#define TLB_WORD2_U3_MASK 0x00001000 +#define TLB_WORD2_U3_ENABLE 0x00001000 +#define TLB_WORD2_U3_DISABLE 0x00000000 +#define TLB_WORD2_W_MASK 0x00000800 +#define TLB_WORD2_W_ENABLE 0x00000800 +#define TLB_WORD2_W_DISABLE 0x00000000 +#define TLB_WORD2_I_MASK 0x00000400 +#define TLB_WORD2_I_ENABLE 0x00000400 +#define TLB_WORD2_I_DISABLE 0x00000000 +#define TLB_WORD2_M_MASK 0x00000200 +#define TLB_WORD2_M_ENABLE 0x00000200 +#define TLB_WORD2_M_DISABLE 0x00000000 +#define TLB_WORD2_G_MASK 0x00000100 +#define TLB_WORD2_G_ENABLE 0x00000100 +#define TLB_WORD2_G_DISABLE 0x00000000 +#define TLB_WORD2_E_MASK 0x00000080 +#define TLB_WORD2_E_ENABLE 0x00000080 +#define TLB_WORD2_E_DISABLE 0x00000000 +#define TLB_WORD2_UX_MASK 0x00000020 +#define TLB_WORD2_UX_ENABLE 0x00000020 +#define TLB_WORD2_UX_DISABLE 0x00000000 +#define TLB_WORD2_UW_MASK 0x00000010 +#define TLB_WORD2_UW_ENABLE 0x00000010 +#define TLB_WORD2_UW_DISABLE 0x00000000 +#define TLB_WORD2_UR_MASK 0x00000008 +#define TLB_WORD2_UR_ENABLE 0x00000008 +#define TLB_WORD2_UR_DISABLE 0x00000000 +#define TLB_WORD2_SX_MASK 0x00000004 +#define TLB_WORD2_SX_ENABLE 0x00000004 +#define TLB_WORD2_SX_DISABLE 0x00000000 +#define TLB_WORD2_SW_MASK 0x00000002 +#define TLB_WORD2_SW_ENABLE 0x00000002 +#define TLB_WORD2_SW_DISABLE 0x00000000 +#define TLB_WORD2_SR_MASK 0x00000001 +#define TLB_WORD2_SR_ENABLE 0x00000001 +#define TLB_WORD2_SR_DISABLE 0x00000000 + +/*----------------------------------------------------------------------------+ +| Board specific defines. ++----------------------------------------------------------------------------*/ +#define NONCACHE_MEMORY_SIZE (64*1024) +#define NONCACHE_AREA0_ENDOFFSET (64*1024) +#define NONCACHE_AREA1_ENDOFFSET (32*1024) + +#define FLASH_SECTORSIZE 0x00010000 + +/* SDRAM MICRON */ +#define SDRAM_MICRON 0x2C + +#define SDRAM_TRUE 1 +#define SDRAM_FALSE 0 +#define SDRAM_DDR1 1 +#define SDRAM_DDR2 2 +#define SDRAM_NONE 0 +#define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */ +#define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */ +#define MAXBANKSPERDIMM 2 +#define MAXRANKSPERDIMM 2 +#define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */ +#define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */ +#define ERROR_STR_LENGTH 256 +#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ + +/*----------------------------------------------------------------------------+ +| SDR Configuration registers ++----------------------------------------------------------------------------*/ +/* Serial Device Strap Reg 0 */ +#define sdr_pstrp0 0x0040 + +#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */ +#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */ +#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ + +#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */ +#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ +#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */ + +#define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */ +#define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */ +#define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */ +#define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */ +#define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */ + +/* Serial Device Enabled - Addr = 0xA8 */ +#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 +/* Serial Device Enabled - Addr = 0xA4 */ +#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 + +/* Pin Straps Reg */ +#define SDR0_PSTRP0 0x0040 +#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ + +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ +#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ + +/* fpgareg - defines are in include/config/YUCCA.h */ + +#define SDR0_CUST0_ENET3_MASK 0x00000080 +#define SDR0_CUST0_ENET3_COPPER 0x00000000 +#define SDR0_CUST0_ENET3_FIBER 0x00000080 +#define SDR0_CUST0_RGMII3_MASK 0x00000070 +#define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) +#define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) +#define SDR0_CUST0_RGMII3_DISAB 0x00000000 +#define SDR0_CUST0_RGMII3_RTBI 0x00000040 +#define SDR0_CUST0_RGMII3_RGMII 0x00000050 +#define SDR0_CUST0_RGMII3_TBI 0x00000060 +#define SDR0_CUST0_RGMII3_GMII 0x00000070 +#define SDR0_CUST0_ENET2_MASK 0x00000008 +#define SDR0_CUST0_ENET2_COPPER 0x00000000 +#define SDR0_CUST0_ENET2_FIBER 0x00000008 +#define SDR0_CUST0_RGMII2_MASK 0x00000007 +#define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) +#define SDR0_CUST0_RGMII2_DISAB 0x00000000 +#define SDR0_CUST0_RGMII2_RTBI 0x00000004 +#define SDR0_CUST0_RGMII2_RGMII 0x00000005 +#define SDR0_CUST0_RGMII2_TBI 0x00000006 +#define SDR0_CUST0_RGMII2_GMII 0x00000007 + +#define ONE_MILLION 1000000 +#define ONE_BILLION 1000000000 + +/*----------------------------------------------------------------------------+ +| X +| XX +| XX XXX XXXXX XX XXX XXXXX +| XX XX X XXX XX XX +| XX XX XXXXXX XX XX +| XX XX X XX XX XX XX +| XXX XX XXXXX X XXXX XXX ++----------------------------------------------------------------------------*/ +/*----------------------------------------------------------------------------+ +| Declare Configuration values ++----------------------------------------------------------------------------*/ + +typedef enum config_selection { + CONFIG_NOT_SELECTED, + CONFIG_SELECTED +} config_selection_t; + +typedef enum config_list { + UART2_IN_SERVICE_MODE, + CPU_TRACE_MODE, + UART1_CTS_RTS, + CONFIG_NB +} config_list_t; + +#define MAX_CONFIG_SELECT_NB 3 + +#define BOARD_INFO_UART2_IN_SERVICE_MODE 1 +#define BOARD_INFO_CPU_TRACE_MODE 2 +#define BOARD_INFO_UART1_CTS_RTS_MODE 4 + +void force_bup_config_selection(config_selection_t *confgi_select_P); +void update_config_selection_table(config_selection_t *config_select_P); +void display_config_selection(config_selection_t *config_select_P); + +/*----------------------------------------------------------------------------+ +| XX +| +| XXXX XX XXX XXX XXXX +| XX XX XX XX XX XX +| XX XXX XX XX XX XX XX +| XX XX XXXXX XX XX XX +| XXXX XX XXXX XXXX +| XXXX +| +| +| +| +------------------------------------------------------------------+ +| | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O | +| +----------------------+------------------+-----+------------+-----+ +| | | | | | | +| | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | | +| | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | | +| | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | | +| | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | | +| | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | | +| | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | | +| | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA | +| | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA | +| | GPIO0_8 | PERREADY | I | TRCES4 | NA | +| | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA | +| | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA | +| | GPIO0_11 | IRQ0 | I | TRCTS2 | NA | +| | GPIO0_12 | IRQ1 | I | TRCTS3 | NA | +| | GPIO0_13 | IRQ2 | I | TRCTS4 | NA | +| | GPIO0_14 | IRQ3 | I | TRCTS5 | NA | +| | GPIO0_15 | IRQ4 | I | TRCTS6 | NA | +| | GPIO0_16 | IRQ5 | I | UART2RX | I | +| | GPIO0_17 | PERBE0_N | O | UART2TX | O | +| | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA | +| | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA | +| | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA | +| | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA | +| | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA | +| | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA | +| | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA | +| | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA | +| | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA | +| | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA | +| | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA | +| | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA | +| | GPIO0_30 | UART1RX | I | NA | NA | +| | GPIO0_31 | UART1TX | O | NA | NA | +| | | | | | | +| +----------------------+------------------+-----+------------+-----+ +| ++----------------------------------------------------------------------------*/ + +#define GPIO_MAX 32 +#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ +#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ +#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ +#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ +#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ + /* For the other GPIO number, you must shift */ +/*----------------------------------------------------------------------------+ +| Declare GPIO Configuration values ++----------------------------------------------------------------------------*/ +typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; +typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; + +typedef struct { + unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ +} gpio_param_s; + +unsigned long auto_calc_speed(void); +/*----------------------------------------------------------------------------+ +| Prototypes ++----------------------------------------------------------------------------*/ +void print_evb440spe_info(void); + +int onboard_pci_arbiter_selected(int core_pci); + +#ifdef __cplusplus +} +#endif +#endif /* __YUCCA_H_ */ diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 40e28dd..90a6ad0 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -62,11 +62,12 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) print_num ("bootflags", bd->bi_bootflags ); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440SP) print_str ("procfreq", strmhz(buf, bd->bi_procfreq)); print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq)); #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq)); #endif #else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */ diff --git a/common/serial.c b/common/serial.c index 22d8fd0..d725a3c 100644 --- a/common/serial.c +++ b/common/serial.c @@ -40,7 +40,11 @@ struct serial_device *default_serial_console (void) return &serial_scc_device; #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ || defined(CONFIG_405EP) - return &serial0_device; +#if defined(CONFIG_UART1_CONSOLE) + return &serial1_device; +#else + return &serial0_device; +#endif #else #error No default console #endif diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 64431ab..2fda60e 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -437,7 +437,7 @@ void pci_440_init (struct pci_controller *hose) * The PCI initialization sequence enable bit must be set ... if not abort * pci setup since updating the bit requires chip reset. *--------------------------------------------------------------------------*/ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long strap; mfsdr(sdr_sdstp1,strap); @@ -501,7 +501,7 @@ void pci_440_init (struct pci_controller *hose) out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ #endif -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ #elif defined(PCIX0_BRDGOPT1) @@ -519,8 +519,13 @@ void pci_440_init (struct pci_controller *hose) out32r( PCIX0_POM0SA, 0 ); /* disable */ out32r( PCIX0_POM1SA, 0 ); /* disable */ out32r( PCIX0_POM2SA, 0 ); /* disable */ +#if defined(CONFIG_440SPE) + out32r( PCIX0_POM0LAL, 0x10000000 ); + out32r( PCIX0_POM0LAH, 0x0000000c ); +#else out32r( PCIX0_POM0LAL, 0x00000000 ); out32r( PCIX0_POM0LAH, 0x00000003 ); +#endif out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE ); out32r( PCIX0_POM0PCIAH, 0x00000000 ); out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 86dc2d0..fab65af 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -181,6 +181,9 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; uint32_t failsafe = 10000; +#if defined(CONFIG_440SPE) + unsigned long mfr; +#endif out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ @@ -202,8 +205,23 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) } /* EMAC RESET */ +#if defined(CONFIG_440SPE) + /* provide clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr |= 0x08000000; + mtsdr(sdr_mfr, mfr); +#endif + out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); +#if defined(CONFIG_440SPE) + /* remove clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr &= ~0x08000000; + mtsdr(sdr_mfr, mfr); +#endif + + #ifndef CONFIG_NETCONSOLE hw_p->print_speed = 1; /* print speed message again next time */ #endif @@ -301,7 +319,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) return ((int)pfc1); } -#endif +#endif /* CONFIG_440_GX */ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) { @@ -314,12 +332,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) unsigned mode_reg; unsigned short devnum; unsigned short reg_short; -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) sys_info_t sysinfo; -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) int ethgroup = -1; #endif #endif +#if defined(CONFIG_440SPE) + unsigned long mfr; +#endif + EMAC_4XX_HW_PST hw_p = dev->priv; @@ -330,7 +352,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) return -1; } -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* Need to get the OPB frequency so we can access the PHY */ get_sys_info (&sysinfo); #endif @@ -360,6 +382,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) hw_p->stats.pkts_tx = 0; hw_p->stats.pkts_rx = 0; hw_p->stats.pkts_handled = 0; + hw_p->print_speed = 1; /* print speed message again next time */ #endif hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */ @@ -373,7 +396,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */ hw_p->tx_u_index = 0; /* Transmit User Queue Index */ -#if defined(CONFIG_440) && !defined(CONFIG_440SP) +#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) /* set RMII mode */ /* NOTE: 440GX spec states that mode is mutually exclusive */ /* NOTE: Therefore, disable all other EMACS, since we handle */ @@ -406,6 +429,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) __asm__ volatile ("eieio"); /* reset emac so we have access to the phy */ +#if defined(CONFIG_440SPE) + /* provide clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr |= 0x08000000; + mtsdr(sdr_mfr, mfr); +#endif out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); __asm__ volatile ("eieio"); @@ -416,7 +445,14 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) failsafe--; } -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440SPE) + /* remove clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr &= ~0x08000000; + mtsdr(sdr_mfr, mfr); +#endif + +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* Whack the M1 register */ mode_reg = 0x0; mode_reg &= ~0x00000038; @@ -468,7 +504,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) if (hw_p->first_init == 0) { miiphy_reset (dev->name, reg); -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #if defined(CONFIG_CIS8201_PHY) /* * Cicada 8201 PHY needs to have an extended register whacked @@ -544,7 +580,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) (int) speed, (duplex == HALF) ? "HALF" : "FULL"); } -#if defined(CONFIG_440) && !defined(CONFIG_440SP) +#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mfsdr(sdr_mfr, reg); if (speed == 100) { @@ -575,7 +611,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ /* set the Mal configuration reg */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); #else @@ -759,8 +795,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* set speed */ if (speed == _1000BASET) { -#if defined(CONFIG_440SP) -#define SDR0_PFC1_EM_1000 0x00200000 +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long pfc1; mfsdr (sdr_pfc1, pfc1); pfc1 |= SDR0_PFC1_EM_1000; @@ -787,7 +822,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* set receive low/high water mark register */ #if defined(CONFIG_440) - /* 440GP has a 64 byte burst length */ + /* 440s has a 64 byte burst length */ out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); #else /* 405s have a 16 byte burst length */ @@ -895,7 +930,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, #if defined (CONFIG_440) -#if defined(CONFIG_440SP) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* * Hack: On 440SP all enet irq sources are located on UIC1 * Needs some cleanup. --sr @@ -1367,21 +1402,20 @@ int ppc_4xx_eth_initialize (bd_t * bis) #endif /* set phy num and mode */ bis->bi_phynum[0] = CONFIG_PHY_ADDR; + bis->bi_phymode[0] = 0; + #if defined(CONFIG_PHY1_ADDR) bis->bi_phynum[1] = CONFIG_PHY1_ADDR; + bis->bi_phymode[1] = 0; #endif #if defined(CONFIG_440GX) bis->bi_phynum[2] = CONFIG_PHY2_ADDR; bis->bi_phynum[3] = CONFIG_PHY3_ADDR; - bis->bi_phymode[0] = 0; - bis->bi_phymode[1] = 0; bis->bi_phymode[2] = 2; bis->bi_phymode[3] = 2; -#if defined (CONFIG_440GX) ppc_4xx_eth_setup_bridge(0, bis); #endif -#endif for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { @@ -1478,9 +1512,15 @@ int ppc_4xx_eth_initialize (bd_t * bis) if (0 == virgin) { /* set the MAL IER ??? names may change with new spec ??? */ +#if defined(CONFIG_440SPE) + mal_ier = + MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | + MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ; +#else mal_ier = MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | MAL_IER_OPBE | MAL_IER_PLBE; +#endif mtdcr (malesr, 0xffffffff); /* clear pending interrupts */ mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */ mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */ @@ -1510,11 +1550,13 @@ int ppc_4xx_eth_initialize (bd_t * bis) #else emac0_dev = dev; #endif + +#if defined(CONFIG_NET_MULTI) #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) miiphy_register (dev->name, emac4xx_miiphy_read, emac4xx_miiphy_write); #endif - +#endif } /* end for each supported device */ return (1); } diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index a26533c..3e85a88 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -78,7 +78,9 @@ int pci_arbiter_enabled(void) return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) unsigned long val; mfsdr(sdr_sdstp1, val); @@ -87,8 +89,8 @@ int pci_arbiter_enabled(void) } #endif -#if defined(CONFIG_405EP)|| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define I2C_BOOTROM @@ -98,7 +100,9 @@ int i2c_bootrom_enabled(void) return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) unsigned long val; mfsdr(sdr_sdcs, val); @@ -237,6 +241,12 @@ int checkcpu (void) puts("SP Rev. B"); break; + case PVR_440SPe_RA: + puts("SPe 3GA533C"); + break; + case PVR_440SPe_RB: + puts("SPe 3GB533C"); + break; default: printf (" UNKNOWN (PVR=%08x)", pvr); break; diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 1d8dc7c..fdae846 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -48,18 +48,22 @@ struct irq_action { }; static struct irq_action irq_vecs[32]; +void uic0_interrupt( void * parms); /* UIC0 handler */ #if defined(CONFIG_440) static struct irq_action irq_vecs1[32]; /* For UIC1 */ void uic1_interrupt( void * parms); /* UIC1 handler */ -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) static struct irq_action irq_vecs2[32]; /* For UIC2 */ - -void uic0_interrupt( void * parms); /* UIC0 handler */ void uic2_interrupt( void * parms); /* UIC2 handler */ -#endif /* CONFIG_440GX */ +#endif /* CONFIG_440GX CONFIG_440SPE */ + +#if defined(CONFIG_440SPE) +static struct irq_action irq_vecs3[32]; /* For UIC3 */ +void uic3_interrupt( void * parms); /* UIC3 handler */ +#endif /* CONFIG_440SPE */ #endif /* CONFIG_440 */ @@ -115,11 +119,16 @@ int interrupt_init_cpu (unsigned *decrementer_count) irq_vecs1[vec].handler = NULL; irq_vecs1[vec].arg = NULL; irq_vecs1[vec].count = 0; -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) irq_vecs2[vec].handler = NULL; irq_vecs2[vec].arg = NULL; irq_vecs2[vec].count = 0; #endif /* CONFIG_440GX */ +#if defined(CONFIG_440SPE) + irq_vecs3[vec].handler = NULL; + irq_vecs3[vec].arg = NULL; + irq_vecs3[vec].count = 0; +#endif /* CONFIG_440SPE */ #endif } @@ -221,6 +230,34 @@ void external_interrupt(struct pt_regs *regs) } /* external_interrupt CONFIG_440GX */ +#elif defined(CONFIG_440SPE) +void external_interrupt(struct pt_regs *regs) +{ + ulong uic_msr; + + /* + * Read masked interrupt status register to determine interrupt source + */ + /* 440 SPe uses base uic register */ + uic_msr = mfdcr(uic0msr); + + if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) ) + uic1_interrupt(0); + + if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) ) + uic2_interrupt(0); + + if ( (UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr) ) + uic3_interrupt(0); + + if (uic_msr & ~(UICB0_ALL)) + uic0_interrupt(0); + + mtdcr(uic0sr, uic_msr); + + return; +} /* external_interrupt CONFIG_440SPE */ + #else void external_interrupt(struct pt_regs *regs) @@ -266,7 +303,7 @@ void external_interrupt(struct pt_regs *regs) } #endif -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) /* Handler for UIC0 interrupt */ void uic0_interrupt( void * parms) { @@ -357,8 +394,8 @@ void uic1_interrupt( void * parms) } #endif /* defined(CONFIG_440) */ -#if defined(CONFIG_440GX) -/* Handler for UIC1 interrupt */ +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +/* Handler for UIC2 interrupt */ void uic2_interrupt( void * parms) { ulong uic2_msr; @@ -384,7 +421,7 @@ void uic2_interrupt( void * parms) (*irq_vecs2[vec].handler)(irq_vecs2[vec].arg); } else { mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> vec)); - printf ("Masking bogus interrupt vector (uic1) 0x%x\n", vec); + printf ("Masking bogus interrupt vector (uic2) 0x%x\n", vec); } /* @@ -402,6 +439,51 @@ void uic2_interrupt( void * parms) } #endif /* defined(CONFIG_440GX) */ +#if defined(CONFIG_440SPE) +/* Handler for UIC3 interrupt */ +void uic3_interrupt( void * parms) +{ + ulong uic3_msr; + ulong msr_shift; + int vec; + + /* + * Read masked interrupt status register to determine interrupt source + */ + uic3_msr = mfdcr(uic3msr); + msr_shift = uic3_msr; + vec = 0; + + while (msr_shift != 0) { + if (msr_shift & 0x80000000) { + /* + * Increment irq counter (for debug purpose only) + */ + irq_vecs3[vec].count++; + + if (irq_vecs3[vec].handler != NULL) { + /* call isr */ + (*irq_vecs3[vec].handler)(irq_vecs3[vec].arg); + } else { + mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> vec)); + printf ("Masking bogus interrupt vector (uic3) 0x%x\n", vec); + } + + /* + * After servicing the interrupt, we have to remove the status indicator. + */ + mtdcr(uic3sr, (0x80000000 >> vec)); + } + + /* + * Shift msr to next position and increment vector + */ + msr_shift <<= 1; + vec++; + } +} +#endif /* defined(CONFIG_440SPE) */ + /****************************************************************************/ /* @@ -414,7 +496,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) int i = vec; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) if ((vec > 31) && (vec < 64)) { i = vec - 32; irqa = irq_vecs1; @@ -441,7 +523,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) irqa[i].arg = arg; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) if ((vec > 31) && (vec < 64)) mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i)); else if (vec > 63) @@ -464,7 +546,7 @@ void irq_free_handler (int vec) int i = vec; #if defined(CONFIG_440) -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) if ((vec > 31) && (vec < 64)) { irqa = irq_vecs1; i = vec - 32; @@ -485,7 +567,7 @@ void irq_free_handler (int vec) #endif #if defined(CONFIG_440) -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) if ((vec > 31) && (vec < 64)) mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i)); else if (vec > 63) @@ -553,7 +635,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf("\n"); #endif -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) printf ("\nUIC 2\n"); printf ("Nr Routine Arg Count\n"); @@ -566,6 +648,19 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf("\n"); #endif +#if defined(CONFIG_440SPE) + printf ("\nUIC 3\n"); + printf ("Nr Routine Arg Count\n"); + + for (vec=0; vec<32; vec++) { + if (irq_vecs3[vec].handler != NULL) + printf ("%02d %08lx %08lx %d\n", + vec+63, (ulong)irq_vecs3[vec].handler, + (ulong)irq_vecs3[vec].arg, irq_vecs3[vec].count); + } + printf("\n"); +#endif + return 0; } #endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */ diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c index f26f2a2..aa580ed 100644 --- a/cpu/ppc4xx/miiphy.c +++ b/cpu/ppc4xx/miiphy.c @@ -50,7 +50,7 @@ #include <405_mal.h> #include <miiphy.h> - +#undef ET_DEBUG /***********************************************************/ /* Dump out to the screen PHY regs */ /***********************************************************/ @@ -90,6 +90,10 @@ int phy_setup_aneg (char *devname, unsigned char addr) PHY_ANLPAR_10); miiphy_write (devname, addr, PHY_ANAR, adv); + miiphy_read (devname, addr, PHY_1000BTCR, &adv); + adv |= (0x0300); + miiphy_write (devname, addr, PHY_1000BTCR, adv); + /* Start/Restart aneg */ miiphy_read (devname, addr, PHY_BMCR, &ctl); ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); @@ -104,7 +108,7 @@ int phy_setup_aneg (char *devname, unsigned char addr) /***********************************************************/ unsigned int miiphy_getemac_offset (void) { -#if (defined(CONFIG_440) && !defined(CONFIG_440SP)) && defined(CONFIG_NET_MULTI) +#if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI) unsigned long zmii; unsigned long eoffset; @@ -155,10 +159,12 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, i = 0; /* see if it is ready for sec */ - while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) { + while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) { -#if 0 +#ifdef ET_DEBUG + sta_reg = in32 (EMAC_STACR + emac_reg); + printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ printf ("read err 1\n"); #endif return -1; @@ -167,31 +173,41 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, } sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ -#if defined(CONFIG_440GX) - sta_reg |= EMAC_STACR_READ; +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ + sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ; +#else + sta_reg |= EMAC_STACR_READ; +#endif #else sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ; #endif -#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) +#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; #endif sta_reg = sta_reg | (addr << 5); /* Phy address */ - + sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ out32 (EMAC_STACR + emac_reg, sta_reg); -#if 0 /* test-only */ +#ifdef ET_DEBUG printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif sta_reg = in32 (EMAC_STACR + emac_reg); +#ifdef ET_DEBUG + printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ +#endif i = 0; - while ((sta_reg & EMAC_STACR_OC) == 0) { + while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) { return -1; } i++; sta_reg = in32 (EMAC_STACR + emac_reg); +#ifdef ET_DEBUG + printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ +#endif } if ((sta_reg & EMAC_STACR_PHYE) != 0) { return -1; @@ -219,7 +235,7 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, /* see if it is ready for 1000 nsec */ i = 0; - while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) { + while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { if (i > 5) return -1; udelay (7); @@ -228,16 +244,21 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, sta_reg = 0; sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ -#if defined(CONFIG_440GX) - sta_reg |= EMAC_STACR_WRITE; +#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) +#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ + sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE; +#else + sta_reg |= EMAC_STACR_WRITE; +#endif #else sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ; #endif -#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) +#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */ #endif - sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */ + sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */ + sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ memcpy (&sta_reg, &value, 2); /* put in data */ out32 (EMAC_STACR + emac_reg, sta_reg); @@ -245,12 +266,18 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, /* wait for completion */ i = 0; sta_reg = in32 (EMAC_STACR + emac_reg); - while ((sta_reg & EMAC_STACR_OC) == 0) { +#ifdef ET_DEBUG + printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ +#endif + while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) return -1; i++; sta_reg = in32 (EMAC_STACR + emac_reg); +#ifdef ET_DEBUG + printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ +#endif } if ((sta_reg & EMAC_STACR_PHYE) != 0) diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index e7f6bcb..2734520 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -277,11 +277,11 @@ int serial_tstc () #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300 #endif -#if defined(CONFIG_440SP) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600 #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define CR0_MASK 0xdfffffff #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 @@ -311,14 +311,18 @@ int serial_tstc () #if defined(CONFIG_UART1_CONSOLE) #define ACTING_UART0_BASE UART1_BASE #define ACTING_UART1_BASE UART0_BASE -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) #define UART0_SDR sdr_uart1 #define UART1_SDR sdr_uart0 #endif /* CONFIG_440GX */ #else #define ACTING_UART0_BASE UART0_BASE #define ACTING_UART1_BASE UART1_BASE -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) #define UART0_SDR sdr_uart0 #define UART1_SDR sdr_uart1 #endif /* CONFIG_440GX */ @@ -441,7 +445,8 @@ int serial_init(void) unsigned long tmp; #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) #if defined(CONFIG_SERIAL_MULTI) if (UART0_BASE == dev_base) { mfsdr(UART0_SDR,reg); @@ -470,7 +475,9 @@ int serial_init(void) serial_divs (gd->baudrate, &udiv, &bdiv); #endif -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */ #if defined(CONFIG_SERIAL_MULTI) if (UART0_BASE == dev_base) { @@ -615,8 +622,28 @@ void serial_setbrg (void) #else udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1; #endif /* CONFIG_405EP */ + +#if !defined(CFG_EXT_SERIAL_CLOCK) && \ + ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) ) + serial_divs (gd->baudrate, &udiv, &bdiv); + tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */ +#if defined(CONFIG_SERIAL_MULTI) + if (UART0_BASE == dev_base) { + mtsdr (UART0_SDR, tmp); + } else { + mtsdr (UART1_SDR, tmp); + } +#else + mtsdr (UART0_SDR, tmp); +#endif + +#else + tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; +#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */ #if defined(CONFIG_SERIAL_MULTI) out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */ diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 553c491..7778271 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -29,7 +29,11 @@ /* ------------------------------------------------------------------------- */ #define ONE_BILLION 1000000000 - +#ifdef DEBUG +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif #if defined(CONFIG_405GP) || defined(CONFIG_405CR) @@ -283,7 +287,7 @@ ulong get_PCI_freq (void) return sys_info.freqPCI; } -#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) +#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) void get_sys_info (sys_info_t * sysInfo) { unsigned long strp0; @@ -326,6 +330,26 @@ void get_sys_info (sys_info_t * sysInfo) unsigned long m; unsigned long prbdv0; +#if defined(CONFIG_440SPE) + unsigned long sys_freq; + unsigned long sys_per=0; + unsigned long msr; + unsigned long pci_clock_per; + unsigned long sdr_ddrpll; + + /*-------------------------------------------------------------------------+ + | Get the system clock period. + +-------------------------------------------------------------------------*/ + sys_per = determine_sysper(); + + msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */ + + /*-------------------------------------------------------------------------+ + | Calculate the system clock speed from the period. + +-------------------------------------------------------------------------*/ + sys_freq=(ONE_BILLION/sys_per)*1000; +#endif + /* Extract configured divisors */ mfsdr( sdr_sdstp0,strp0 ); mfsdr( sdr_sdstp1,strp1 ); @@ -360,12 +384,238 @@ void get_sys_info (sys_info_t * sysInfo) m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB; /* Now calculate the individual clocks */ +#if defined(CONFIG_440SPE) + sysInfo->freqVCOMhz = (m * sys_freq) ; +#else sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1); +#endif sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA; sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0; sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv; sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv; +#if defined(CONFIG_440SPE) + /* Determine PCI Clock Period */ + pci_clock_per = determine_pci_clock_per(); + sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000; + mfsdr(sdr_ddr0, sdr_ddrpll); + sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); +#endif + + +} + +#endif + +#if defined(CONFIG_440SPE) +unsigned long determine_sysper(void) +{ + unsigned int fpga_clocking_reg; + unsigned int master_clock_selection; + unsigned long master_clock_per = 0; + unsigned long fb_div_selection; + unsigned int vco_div_reg_value; + unsigned long vco_div_selection; + unsigned long sys_per = 0; + int extClkVal; + + /*-------------------------------------------------------------------------+ + | Read FPGA reg 0 and reg 1 to get FPGA reg information + +-------------------------------------------------------------------------*/ + fpga_clocking_reg = in16(FPGA_REG16); + + + /* Determine Master Clock Source Selection */ + master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK; + + switch(master_clock_selection) { + case FPGA_REG16_MASTER_CLK_66_66: + master_clock_per = PERIOD_66_66MHZ; + break; + case FPGA_REG16_MASTER_CLK_50: + master_clock_per = PERIOD_50_00MHZ; + break; + case FPGA_REG16_MASTER_CLK_33_33: + master_clock_per = PERIOD_33_33MHZ; + break; + case FPGA_REG16_MASTER_CLK_25: + master_clock_per = PERIOD_25_00MHZ; + break; + case FPGA_REG16_MASTER_CLK_EXT: + if ((extClkVal==EXTCLK_33_33) + && (extClkVal==EXTCLK_50) + && (extClkVal==EXTCLK_66_66) + && (extClkVal==EXTCLK_83)) { + /* calculate master clock period from external clock value */ + master_clock_per=(ONE_BILLION/extClkVal) * 1000; + } else { + /* Unsupported */ + DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__); + hang(); + } + break; + default: + /* Unsupported */ + DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__); + hang(); + break; + } + + /* Determine FB divisors values */ + if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) { + if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW) + fb_div_selection = FPGA_FB_DIV_6; + else + fb_div_selection = FPGA_FB_DIV_12; + } else { + if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW) + fb_div_selection = FPGA_FB_DIV_10; + else + fb_div_selection = FPGA_FB_DIV_20; + } + + /* Determine VCO divisors values */ + vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK; + + switch(vco_div_reg_value) { + case FPGA_REG16_VCO_DIV_4: + vco_div_selection = FPGA_VCO_DIV_4; + break; + case FPGA_REG16_VCO_DIV_6: + vco_div_selection = FPGA_VCO_DIV_6; + break; + case FPGA_REG16_VCO_DIV_8: + vco_div_selection = FPGA_VCO_DIV_8; + break; + case FPGA_REG16_VCO_DIV_10: + default: + vco_div_selection = FPGA_VCO_DIV_10; + break; + } + + if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) { + switch(master_clock_per) { + case PERIOD_25_00MHZ: + if (fb_div_selection == FPGA_FB_DIV_12) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_75_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_50_00MHZ; + } + break; + case PERIOD_33_33MHZ: + if (fb_div_selection == FPGA_FB_DIV_6) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_50_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_33_33MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_10) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_83_33MHZ; + if (vco_div_selection == FPGA_VCO_DIV_10) + sys_per = PERIOD_33_33MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_12) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_100_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_66_66MHZ; + if (vco_div_selection == FPGA_VCO_DIV_8) + sys_per = PERIOD_50_00MHZ; + } + break; + case PERIOD_50_00MHZ: + if (fb_div_selection == FPGA_FB_DIV_6) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_75_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_50_00MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_10) { + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_83_33MHZ; + if (vco_div_selection == FPGA_VCO_DIV_10) + sys_per = PERIOD_50_00MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_12) { + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_100_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_8) + sys_per = PERIOD_75_00MHZ; + } + break; + case PERIOD_66_66MHZ: + if (fb_div_selection == FPGA_FB_DIV_6) { + if (vco_div_selection == FPGA_VCO_DIV_4) + sys_per = PERIOD_100_00MHZ; + if (vco_div_selection == FPGA_VCO_DIV_6) + sys_per = PERIOD_66_66MHZ; + if (vco_div_selection == FPGA_VCO_DIV_8) + sys_per = PERIOD_50_00MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_10) { + if (vco_div_selection == FPGA_VCO_DIV_8) + sys_per = PERIOD_83_33MHZ; + if (vco_div_selection == FPGA_VCO_DIV_10) + sys_per = PERIOD_66_66MHZ; + } + if (fb_div_selection == FPGA_FB_DIV_12) { + if (vco_div_selection == FPGA_VCO_DIV_8) + sys_per = PERIOD_100_00MHZ; + } + break; + default: + break; + } + + if (sys_per == 0) { + /* Other combinations are not supported */ + DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__); + hang(); + } + } else { + /* calcul system clock without cheking */ + /* if engineering option clock no check is selected */ + /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */ + sys_per = (master_clock_per/fb_div_selection) * vco_div_selection; + } + + return(sys_per); + +} + +/*-------------------------------------------------------------------------+ +| determine_pci_clock_per. ++-------------------------------------------------------------------------*/ +unsigned long determine_pci_clock_per(void) +{ + unsigned long pci_clock_selection, pci_period; + + /*-------------------------------------------------------------------------+ + | Read FPGA reg 6 to get PCI 0 FPGA reg information + +-------------------------------------------------------------------------*/ + pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */ + + + pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK; + + switch (pci_clock_selection) { + case FPGA_REG16_PCI0_CLK_133_33: + pci_period = PERIOD_133_33MHZ; + break; + case FPGA_REG16_PCI0_CLK_100: + pci_period = PERIOD_100_00MHZ; + break; + case FPGA_REG16_PCI0_CLK_66_66: + pci_period = PERIOD_66_66MHZ; + break; + default: + pci_period = PERIOD_33_33MHZ;; + break; + } + + return(pci_period); } #endif diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 48b430d..c1e787f 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -155,6 +155,11 @@ /**************************************************************************/ _start_440: + /*----------------------------------------------------------------+ + | Core bug fix. Clear the esr + +-----------------------------------------------------------------*/ + addi r0,r0,0x0000 + mtspr esr,r0 /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ @@ -166,7 +171,7 @@ _start_440: mtspr srr1,r0 mtspr csrr0,r0 mtspr csrr1,r0 -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) /* NOTE: 440GX adds machine check status regs */ +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */ mtspr mcsrr0,r0 mtspr mcsrr1,r0 mfspr r1, mcsr @@ -200,6 +205,33 @@ _start_440: ori r1,r1,0x6000 /* cache touch */ mtspr ccr0,r1 +#if defined (CONFIG_440SPE) + /*----------------------------------------------------------------+ + | Initialize Core Configuration Reg1. + | a. ICDPEI: Record even parity. Normal operation. + | b. ICTPEI: Record even parity. Normal operation. + | c. DCTPEI: Record even parity. Normal operation. + | d. DCDPEI: Record even parity. Normal operation. + | e. DCUPEI: Record even parity. Normal operation. + | f. DCMPEI: Record even parity. Normal operation. + | g. FCOM: Normal operation + | h. MMUPEI: Record even parity. Normal operation. + | i. FFF: Flush only as much data as necessary. + | j. TCS: Timebase increments from externally supplied clock + +-----------------------------------------------------------------*/ + addis r0, r0, 0x0000 + ori r0, r0, 0x0080 + mtspr ccr1, r0 + + /*----------------------------------------------------------------+ + | Reset the timebase. + | The previous write to CCR1 sets the timebase source. + +-----------------------------------------------------------------*/ + addi r0, r0, 0x0000 + mtspr tbl, r0 + mtspr tbu, r0 +#endif + /*----------------------------------------------------------------*/ /* Setup interrupt vectors */ /*----------------------------------------------------------------*/ @@ -261,15 +293,26 @@ _start_440: mtspr ivlim,r1 mtspr dvlim,r1 + /*----------------------------------------------------------------+ + |Initialize MMUCR[STID] = 0. + +-----------------------------------------------------------------*/ + mfspr r0,mmucr + addis r1,0,0xFFFF + ori r1,r1,0xFF00 + and r0,r0,r1 + mtspr mmucr,r0 + /*----------------------------------------------------------------*/ /* Clear all TLB entries -- TID = 0, TS = 0 */ /*----------------------------------------------------------------*/ - mtspr mmucr,r0 + addis r0,0,0x0000 li r1,0x003f /* 64 TLB entries */ mtctr r1 -0: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ +rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ + tlbwe r0,r1,0x0001 + tlbwe r0,r1,0x0002 subi r1,r1,0x0001 - bdnz 0b + bdnz rsttlb /*----------------------------------------------------------------*/ /* TLB entry setup -- step thru tlbtab */ @@ -340,7 +383,7 @@ _start: mtspr tcr,r0 /* disable all */ mtspr esr,r0 /* clear exception syndrome register */ mtxer r0 /* clear integer exception register */ -#if !defined(CONFIG_440GX) +#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE) lis r1,0x0002 /* set CE bit (Critical Exceptions) */ ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */ mtmsr r1 /* change MSR */ @@ -394,7 +437,7 @@ __440gx_msr_continue: addi r3,r3,32 bdnz ..d_ag #else -#if defined (CONFIG_440GX) || defined(CONFIG_440SP) +#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */ #endif mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ @@ -421,6 +464,19 @@ __440gx_msr_continue: lis r1, 0x8003 ori r1,r1, 0x0980 /* fourth 64k */ mtdcr isram0_sb3cr,r1 +#elif defined(CONFIG_440SPE) + lis r1,0x0000 /* BAS = 0000_0000 */ + ori r1,r1,0x0984 /* first 64k */ + mtdcr isram0_sb0cr,r1 + lis r1,0x0001 + ori r1,r1,0x0984 /* second 64k */ + mtdcr isram0_sb1cr,r1 + lis r1, 0x0002 + ori r1,r1, 0x0984 /* third 64k */ + mtdcr isram0_sb2cr,r1 + lis r1, 0x0003 + ori r1,r1, 0x0984 /* fourth 64k */ + mtdcr isram0_sb3cr,r1 #else ori r1,r1,0x0380 /* 8k rw */ mtdcr isram0_sb0cr,r1 @@ -1220,7 +1276,7 @@ ppcSync: */ .globl relocate_code relocate_code: -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) dccci 0,0 /* Invalidate data cache, now no longer our stack */ sync addi r1,r0,0x0000 /* TLB entry #0 */ diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h index cbfe41d..93cef02 100644 --- a/cpu/ppc4xx/vecnum.h +++ b/cpu/ppc4xx/vecnum.h @@ -31,7 +31,48 @@ #ifndef _VECNUMS_H_ #define _VECNUMS_H_ -#if defined(CONFIG_440SP) +#if defined(CONFIG_440SPE) +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_MSI0 7 /* PCI MSI level 0 */ +#define VECNUM_MSI1 8 /* PCI MSI level 0 */ +#define VECNUM_MSI2 9 /* PCI MSI level 0 */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 1 ) /* MAL SERR */ +#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */ +#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */ +#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */ +#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */ +#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ + +/* UIC 2 */ +#define VECNUM_EIR5 (62 + 24) /* External interrupt 5 */ +#define VECNUM_EIR4 (62 + 25) /* External interrupt 4 */ +#define VECNUM_EIR3 (62 + 26) /* External interrupt 3 */ +#define VECNUM_EIR2 (62 + 27) /* External interrupt 2 */ +#define VECNUM_EIR1 (62 + 28) /* External interrupt 1 */ +#define VECNUM_EIR0 (62 + 29) /* External interrupt 0 */ + +#elif defined(CONFIG_440SP) /* UIC 0 */ #define VECNUM_U0 0 /* UART0 */ diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c index e8f19f5..0ae4701 100644 --- a/drivers/pci_indirect.c +++ b/drivers/pci_indirect.c @@ -52,7 +52,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ return 0; \ } -#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ indirect_##rw##_config_##size(struct pci_controller *hose, \ diff --git a/include/405_mal.h b/include/405_mal.h index 69d20c9..0598586 100644 --- a/include/405_mal.h +++ b/include/405_mal.h @@ -92,11 +92,21 @@ #define MAL_ESR_PBEI 0x00000001 /* ^^ ^^ */ /* Mal IER */ +#ifdef CONFIG_440SPE +#define MAL_IER_PT 0x00000080 +#define MAL_IER_PRE 0x00000040 +#define MAL_IER_PWE 0x00000020 +#define MAL_IER_DE 0x00000010 +#define MAL_IER_OTE 0x00000004 +#define MAL_IER_OE 0x00000002 +#define MAL_IER_PE 0x00000001 +#else #define MAL_IER_DE 0x00000010 #define MAL_IER_NE 0x00000008 #define MAL_IER_TE 0x00000004 #define MAL_IER_OPBE 0x00000002 #define MAL_IER_PLBE 0x00000001 +#endif /* MAL Channel Active Set and Reset Registers */ #define MAL_TXRX_CASR (0x80000000) diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 2606b79..baaf6f7 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -470,4 +470,45 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19) #define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20) +#ifdef CONFIG_440SPE +/*----------------------------------------------------------------------------+ +| Following instructions are not available in Book E mode of the GNU assembler. ++----------------------------------------------------------------------------*/ +#define DCCCI(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(454<<1) + +#define ICCCI(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(966<<1) + +#define DCREAD(rt,ra,rb) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(rb<<11)|(486<<1) + +#define ICREAD(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(998<<1) + +#define TLBSX(rt,ra,rb) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(rb<<11)|(914<<1) + +#define TLBWE(rs,ra,ws) .long 0x7c000000|\ + (rs<<21)|(ra<<16)|(ws<<11)|(978<<1) + +#define TLBRE(rt,ra,ws) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(ws<<11)|(946<<1) + +#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\ + (rt<<21)|(ra<<16)|(rb<<11)|(914<<1) + +#define MSYNC .long 0x7c000000|\ + (598<<1) + +#define MBAR_INST .long 0x7c000000|\ + (854<<1) + +/*----------------------------------------------------------------------------+ +| Following instruction is not available in PPC405 mode of the GNU assembler. ++----------------------------------------------------------------------------*/ +#define TLBRE(rt,ra,ws) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(ws<<11)|(946<<1) + +#endif #endif /* _PPC_MMU_H_ */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 8113783..9a9b8ba 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -733,6 +733,8 @@ #define PVR_405EP_RB 0x51210950 #define PVR_440SP_RA 0x53221850 #define PVR_440SP_RB 0x53221891 +#define PVR_440SPe_RA 0x53421890 +#define PVR_440SPe_RB 0x53521891 #define PVR_601 0x00010000 #define PVR_602 0x00050000 #define PVR_603 0x00030000 diff --git a/include/common.h b/include/common.h index d2570a8..408d142 100644 --- a/include/common.h +++ b/include/common.h @@ -457,6 +457,10 @@ void get_sys_info ( sys_info_t * ); #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) # if defined(CONFIG_440) typedef PPC440_SYS_INFO sys_info_t; +# if defined(CONFIG_440SPE) + unsigned long determine_sysper(void); + unsigned long determine_pci_clock_per(void); +# endif # else typedef PPC405_SYS_INFO sys_info_t; # endif diff --git a/include/configs/yucca.h b/include/configs/yucca.h new file mode 100644 index 0000000..95de1ea --- /dev/null +++ b/include/configs/yucca.h @@ -0,0 +1,518 @@ +/* + * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * 1 january 2005 Alain Saurel <asaurel@amcc.com> + * Adapted to current Das U-Boot source + ***********************************************************************/ +/************************************************************************ + * yucca.h - configuration for AMCC 440SPe Ref (yucca) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define DEBUG +#undef DEBUG + +#define CONFIG_IDENT_STRING "\nU_440SPe_V1R01 level06" +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_440SPE 1 /* Specifc SPe support */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define EXTCLK_33_33 33333333 +#define EXTCLK_66_66 66666666 +#define EXTCLK_50 50000000 +#define EXTCLK_83 83333333 + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#undef CONFIG_SHOW_BOOT_PROGRESS +#undef CONFIG_STRESS +#undef ENABLE_ECC +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfffb0000 /* start of monitor */ +#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ + +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 0x90000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE2 0xa0000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE3 0xb0000000 /* mapped pci memory */ + +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_TARGBASE 0x80000000 /*PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* #define CFG_PCI_BASE_IO 0xB8000000 */ /* internal PCI I-O */ +/* #define CFG_PCI_BASE_REGS 0xBEC00000 */ /* internal PCI regs */ +/* #define CFG_PCI_BASE_CYCLE 0xBED00000 */ /* internal PCI regs */ + +#define CFG_FPGA_BASE 0xe2000000 /* epld */ +#define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ + +/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */ +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_SERIAL_MULTI 1 +#undef CONFIG_UART1_CONSOLE + +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK +/* #define CFG_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */ + +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */ +#define IIC0_DIMM0_ADDR 0x53 +#define IIC0_DIMM1_ADDR 0x52 + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define IIC0_BOOTPROM_ADDR 0x50 +#define IIC0_ALT_BOOTPROM_ADDR 0x54 + +/* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} + +/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ +/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +/* #endif */ + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +/* #define CFG_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */ + +#undef CFG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ +#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_BOOTARGS "console=ttyS0,115200n8 root=/dev/nfs rw" +#define CONFIG_BOOTCOMMAND "bootm E7C00000" /* autoboot command */ +#define CONFIG_BOOTDELAY -1 /* -1 to disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#undef CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.80.10 +#define CONFIG_ETHADDR 00:04:AC:01:CA:FE +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_SERVERIP 192.168.1.1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loads_echo=1\0" \ + "netdev=eth0\0" \ + "hostname=yucca\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk-4.0/ppc_4xx\0" \ + "bootfile=yucca/uImage\0" \ + "kernel_addr=E7F10000\0" \ + "ramdisk_addr=E7F20000\0" \ + "load=tftp 100000 yuca/u-boot.bin\0" \ + "update=protect off 2:4-7;era 2:4-7;" \ + "cp.b ${fileaddr} fffc0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PCI | \ + CFG_CMD_IRQ | \ + CFG_CMD_I2C | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x5555 +#define CFG_FLASH_ADDR1 0x2aaa +#define CFG_FLASH_WORD_SIZE unsigned char + +#define CFG_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */ +#define CFG_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR 0xfffa0000 +/* #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */ +#define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */ +#endif /* CFG_ENV_IS_IN_FLASH */ +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW i /* show pci devices on startup */ +#undef CONFIG_PCI_CONFIG_HOST_BRIDGE + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#undef CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */ + +/* + * NETWORK Support (PCI): + */ +/* Support for Intel 82557/82559/82559ER chips. */ +#define CONFIG_EEPRO100 +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* FB Divisor selection */ +#define FPGA_FB_DIV_6 6 +#define FPGA_FB_DIV_10 10 +#define FPGA_FB_DIV_12 12 +#define FPGA_FB_DIV_20 20 + +/* VCO Divisor selection */ +#define FPGA_VCO_DIV_4 4 +#define FPGA_VCO_DIV_6 6 +#define FPGA_VCO_DIV_8 8 +#define FPGA_VCO_DIV_10 10 + +/*----------------------------------------------------------------------------+ +| FPGA registers and bit definitions ++----------------------------------------------------------------------------*/ +/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */ +/* TLB initialization makes it correspond to logical address 0xE2000000. */ +/* => Done init_chip.s in bootlib */ +#define FPGA_REG_BASE_ADDR 0xE2000000 +#define FPGA_GPIO_BASE_ADDR 0xE2010000 +#define FPGA_INT_BASE_ADDR 0xE2020000 + +/*----------------------------------------------------------------------------+ +| Display ++----------------------------------------------------------------------------*/ +#define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR + +#define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06) +#define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04) +#define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02) +#define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00) +/*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/ +/*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/ + +/*----------------------------------------------------------------------------+ +| ethernet/reset/boot Register 1 ++----------------------------------------------------------------------------*/ +#define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10) + +#define FPGA_REG10_10MHZ_ENABLE 0x8000 +#define FPGA_REG10_100MHZ_ENABLE 0x4000 +#define FPGA_REG10_GIGABIT_ENABLE 0x2000 +#define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/ +#define FPGA_REG10_RESET_ETH 0x0800 +#define FPGA_REG10_AUTO_NEG_DIS 0x0400 +#define FPGA_REG10_INTP_ETH 0x0200 + +#define FPGA_REG10_RESET_HISR 0x0080 +#define FPGA_REG10_ENABLE_DISPLAY 0x0040 +#define FPGA_REG10_RESET_SDRAM 0x0020 +#define FPGA_REG10_OPER_BOOT 0x0010 +#define FPGA_REG10_SRAM_BOOT 0x0008 +#define FPGA_REG10_SMALL_BOOT 0x0004 +#define FPGA_REG10_FORCE_COLA 0x0002 +#define FPGA_REG10_COLA_MANUAL 0x0001 + +#define FPGA_REG10_SDRAM_ENABLE 0x0020 + +#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/ +#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/ + +/*----------------------------------------------------------------------------+ +| MUX control ++----------------------------------------------------------------------------*/ +#define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12) + +#define FPGA_REG12_EBC_CTL 0x8000 +#define FPGA_REG12_UART1_CTS_RTS 0x4000 +#define FPGA_REG12_UART0_RX_ENABLE 0x2000 +#define FPGA_REG12_UART1_RX_ENABLE 0x1000 +#define FPGA_REG12_UART2_RX_ENABLE 0x0800 +#define FPGA_REG12_EBC_OUT_ENABLE 0x0400 +#define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200 +#define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100 +#define FPGA_REG12_GPIO_SELECT 0x0010 +#define FPGA_REG12_GPIO_CHREG 0x0008 +#define FPGA_REG12_GPIO_CLK_CHREG 0x0004 +#define FPGA_REG12_GPIO_OETRI 0x0002 +#define FPGA_REG12_EBC_ERROR 0x0001 + +/*----------------------------------------------------------------------------+ +| PCI Clock control ++----------------------------------------------------------------------------*/ +#define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16) + +#define FPGA_REG16_PCI_CLK_CTL0 0x8000 +#define FPGA_REG16_PCI_CLK_CTL1 0x4000 +#define FPGA_REG16_PCI_CLK_CTL2 0x2000 +#define FPGA_REG16_PCI_CLK_CTL3 0x1000 +#define FPGA_REG16_PCI_CLK_CTL4 0x0800 +#define FPGA_REG16_PCI_CLK_CTL5 0x0400 +#define FPGA_REG16_PCI_CLK_CTL6 0x0200 +#define FPGA_REG16_PCI_CLK_CTL7 0x0100 +#define FPGA_REG16_PCI_CLK_CTL8 0x0080 +#define FPGA_REG16_PCI_CLK_CTL9 0x0040 +#define FPGA_REG16_PCI_EXT_ARB0 0x0020 +#define FPGA_REG16_PCI_MODE_1 0x0010 +#define FPGA_REG16_PCI_TARGET_MODE 0x0008 +#define FPGA_REG16_PCI_INTP_MODE 0x0004 + +/* FB1 Divisor selection */ +#define FPGA_REG16_FB2_DIV_MASK 0x1000 +#define FPGA_REG16_FB2_DIV_LOW 0x0000 +#define FPGA_REG16_FB2_DIV_HIGH 0x1000 +/* FB2 Divisor selection */ +/* S3 switch on Board */ +#define FPGA_REG16_FB1_DIV_MASK 0x2000 +#define FPGA_REG16_FB1_DIV_LOW 0x0000 +#define FPGA_REG16_FB1_DIV_HIGH 0x2000 +/* PCI0 Clock Selection */ +/* S3 switch on Board */ +#define FPGA_REG16_PCI0_CLK_MASK 0x0c00 +#define FPGA_REG16_PCI0_CLK_33_33 0x0000 +#define FPGA_REG16_PCI0_CLK_66_66 0x0800 +#define FPGA_REG16_PCI0_CLK_100 0x0400 +#define FPGA_REG16_PCI0_CLK_133_33 0x0c00 +/* VCO Divisor selection */ +/* S3 switch on Board */ +#define FPGA_REG16_VCO_DIV_MASK 0xc000 +#define FPGA_REG16_VCO_DIV_4 0x0000 +#define FPGA_REG16_VCO_DIV_8 0x4000 +#define FPGA_REG16_VCO_DIV_6 0x8000 +#define FPGA_REG16_VCO_DIV_10 0xc000 +/* Master Clock Selection */ +/* S3, S4 switches on Board */ +#define FPGA_REG16_MASTER_CLK_MASK 0x01c0 +#define FPGA_REG16_MASTER_CLK_EXT 0x0000 +#define FPGA_REG16_MASTER_CLK_66_66 0x0040 +#define FPGA_REG16_MASTER_CLK_50 0x0080 +#define FPGA_REG16_MASTER_CLK_33_33 0x00c0 +#define FPGA_REG16_MASTER_CLK_25 0x0100 + +/*----------------------------------------------------------------------------+ +| PCI Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18) + +#define FPGA_REG18_PCI_PRSNT1 0x8000 +#define FPGA_REG18_PCI_PRSNT2 0x4000 +#define FPGA_REG18_PCI_INTA 0x2000 +#define FPGA_REG18_PCI_SLOT0_INTP 0x1000 +#define FPGA_REG18_PCI_SLOT1_INTP 0x0800 +#define FPGA_REG18_PCI_SLOT2_INTP 0x0400 +#define FPGA_REG18_PCI_SLOT3_INTP 0x0200 +#define FPGA_REG18_PCI_PCI0_VC 0x0100 +#define FPGA_REG18_PCI_PCI0_VTH1 0x0080 +#define FPGA_REG18_PCI_PCI0_VTH2 0x0040 +#define FPGA_REG18_PCI_PCI0_VTH3 0x0020 + +/*----------------------------------------------------------------------------+ +| PCIe Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A) + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +/*----------------------------------------------------------------------------+ +| PCIe Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C) + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0080 +#define FPGA_REG1C_PE2_PERST 0x0040 + +/*----------------------------------------------------------------------------+ +| Defines ++----------------------------------------------------------------------------*/ +#define PERIOD_133_33MHZ 7500 /* 7,5ns */ +#define PERIOD_100_00MHZ 10000 /* 10ns */ +#define PERIOD_83_33MHZ 12000 /* 12ns */ +#define PERIOD_75_00MHZ 13333 /* 13,333ns */ +#define PERIOD_66_66MHZ 15000 /* 15ns */ +#define PERIOD_50_00MHZ 20000 /* 20ns */ +#define PERIOD_33_33MHZ 30000 /* 30ns */ +#define PERIOD_25_00MHZ 40000 /* 40ns */ + +/*---------------------------------------------------------------------------*/ + +#endif /* __CONFIG_H */ diff --git a/include/ppc440.h b/include/ppc440.h index 018f7be..6f73c32 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -25,6 +25,8 @@ /*--------------------------------------------------------------------- */ /* Special Purpose Registers */ /*--------------------------------------------------------------------- */ +#define xer_reg 0x001 +#define lr_reg 0x008 #define dec 0x016 /* decrementer */ #define srr0 0x01a /* save/restore register 0 */ #define srr1 0x01b /* save/restore register 1 */ @@ -37,6 +39,8 @@ #define ivpr 0x03f /* interrupt prefix register */ #define usprg0 0x100 /* user special purpose register general 0 */ #define usprg1 0x110 /* user special purpose register general 1 */ +#define tblr 0x10c /* time base lower, read only */ +#define tbur 0x10d /* time base upper, read only */ #define sprg1 0x111 /* special purpose register general 1 */ #define sprg2 0x112 /* special purpose register general 2 */ #define sprg3 0x113 /* special purpose register general 3 */ @@ -78,7 +82,7 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -167,12 +171,10 @@ #define sdr_malrbl 0x02a0 #define sdr_maltbs 0x02c0 #define sdr_malrbs 0x02e0 -#define sdr_pci0 0x0300 -#define sdr_usb0 0x0320 +#define sdr_pci0 0x0300 +#define sdr_usb0 0x0320 #define sdr_cust0 0x4000 -#define sdr_sdstp2 0x4001 #define sdr_cust1 0x4002 -#define sdr_sdstp3 0x4003 #define sdr_pfc0 0x4100 /* Pin Function 0 */ #define sdr_pfc1 0x4101 /* Pin Function 1 */ #define sdr_plbtr 0x4200 @@ -212,6 +214,554 @@ #define mem_dlycal 0x0084 /* delay line calibration register */ #define mem_eccesr 0x0098 /* ECC error status */ +#ifdef CONFIG_440_GX +#define sdr_amp 0x0240 +#define sdr_xpllc 0x01c1 +#define sdr_xplld 0x01c2 +#define sdr_xcr 0x01c0 +#define sdr_sdstp2 0x4001 +#define sdr_sdstp3 0x4003 +#endif /* CONFIG_440_GX */ + +#ifdef CONFIG_440SPE +#undef sdr_sdstp2 +#define sdr_sdstp2 0x0022 +#undef sdr_sdstp3 +#define sdr_sdstp3 0x0023 +#define sdr_ddr0 0x00E1 +#define sdr_uart2 0x0122 +#define sdr_xcr0 0x01c0 +/* #define sdr_xcr1 0x01c3 only one PCIX - SG */ +/* #define sdr_xcr2 0x01c6 only one PCIX - SG */ +#define sdr_xpllc0 0x01c1 +#define sdr_xplld0 0x01c2 +#define sdr_xpllc1 0x01c4 /*notRCW - SG */ +#define sdr_xplld1 0x01c5 /*notRCW - SG */ +#define sdr_xpllc2 0x01c7 /*notRCW - SG */ +#define sdr_xplld2 0x01c8 /*notRCW - SG */ +#define sdr_amp0 0x0240 +#define sdr_amp1 0x0241 +#define sdr_cust2 0x4004 +#define sdr_cust3 0x4006 +#define sdr_sdstp4 0x4001 +#define sdr_sdstp5 0x4003 +#define sdr_sdstp6 0x4005 +#define sdr_sdstp7 0x4007 + +/*----------------------------------------------------------------------------+ +| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only). ++----------------------------------------------------------------------------*/ +#define CCR0_PRE 0x40000000 +#define CCR0_CRPE 0x08000000 +#define CCR0_DSTG 0x00200000 +#define CCR0_DAPUIB 0x00100000 +#define CCR0_DTB 0x00008000 +#define CCR0_GICBT 0x00004000 +#define CCR0_GDCBT 0x00002000 +#define CCR0_FLSTA 0x00000100 +#define CCR0_ICSLC_MASK 0x0000000C +#define CCR0_ICSLT_MASK 0x00000003 +#define CCR1_TCS_MASK 0x00000080 +#define CCR1_TCS_INTCLK 0x00000000 +#define CCR1_TCS_EXTCLK 0x00000080 +#define MMUCR_SEOA 0x01000000 +#define MMUCR_U1TE 0x00400000 +#define MMUCR_U2SWOAE 0x00200000 +#define MMUCR_DULXE 0x00800000 +#define MMUCR_IULXE 0x00400000 +#define MMUCR_STS 0x00100000 +#define MMUCR_STID_MASK 0x000000FF + +#define SDR0_CFGADDR 0x00E +#define SDR0_CFGDATA 0x00F + +/****************************************************************************** + * PCI express defines + ******************************************************************************/ +#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */ +#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */ +#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */ +#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */ +#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */ +#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */ +#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */ +#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */ +#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */ +#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */ +#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */ +#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */ +#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */ +#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */ +#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */ +#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */ +#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */ +#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */ +#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */ +#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */ +#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */ +#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */ +#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */ +#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */ +#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */ + +#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */ +#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */ +#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */ +#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */ +#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */ +#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */ +#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */ +#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */ +#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */ +#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */ +#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */ +#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */ +#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */ +#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */ +#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */ +#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */ +#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */ +#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */ +#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */ +#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */ +#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */ +#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */ +#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */ +#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */ +#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */ +#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */ +#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */ + +/*----------------------------------------------------------------------------+ +| SDRAM Controller ++----------------------------------------------------------------------------*/ +/*-----------------------------------------------------------------------------+ +| SDRAM DLYCAL Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC +#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK) +#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2) + +/*----------------------------------------------------------------------------+ +| Memory queue defines ++----------------------------------------------------------------------------*/ +/* A REVOIR versus RWC - SG*/ +#define SDRAMQ_DCR_BASE 0x040 + +#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */ +#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */ +#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */ +#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */ +#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */ +#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */ +#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */ +#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */ +#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */ +#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */ +#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */ +#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */ +#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */ +#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */ +#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */ + +/*-----------------------------------------------------------------------------+ +| Memory Bank 0-7 configuration ++-----------------------------------------------------------------------------*/ +#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2) +#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2) +#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */ +#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6) +#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF) +#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */ +#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */ +#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */ +#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */ +#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */ +#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */ +#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */ +#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */ +#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */ +#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */ +#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */ + +/*----------------------------------------------------------------------------+ +| Memory controller defines ++----------------------------------------------------------------------------*/ +#define SDRAMC_DCR_BASE 0x010 +#define SDRAMC_CFGADDR (SDRAMC_DCR_BASE+0x0) /* Memory configuration add */ +#define SDRAMC_CFGDATA (SDRAMC_DCR_BASE+0x1) /* Memory configuration data */ + +/* A REVOIR versus specs 4 bank - SG*/ +#define SDRAM_MCSTAT 0x14 /* memory controller status */ +#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */ +#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */ +#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */ +#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */ +#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */ +#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */ +#define SDRAM_CODT 0x26 /* on die termination for controller */ +#define SDRAM_VVPR 0x27 /* variable VRef programmming */ +#define SDRAM_OPARS 0x28 /* on chip driver control setup */ +#define SDRAM_OPART 0x29 /* on chip driver control trigger */ +#define SDRAM_RTR 0x30 /* refresh timer */ +#define SDRAM_PMIT 0x34 /* power management idle timer */ +#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */ +#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */ +#define SDRAM_MB2CF 0x48 +#define SDRAM_MB3CF 0x4C +#define SDRAM_INITPLR0 0x50 /* manual initialization control */ +#define SDRAM_INITPLR1 0x51 /* manual initialization control */ +#define SDRAM_INITPLR2 0x52 /* manual initialization control */ +#define SDRAM_INITPLR3 0x53 /* manual initialization control */ +#define SDRAM_INITPLR4 0x54 /* manual initialization control */ +#define SDRAM_INITPLR5 0x55 /* manual initialization control */ +#define SDRAM_INITPLR6 0x56 /* manual initialization control */ +#define SDRAM_INITPLR7 0x57 /* manual initialization control */ +#define SDRAM_INITPLR8 0x58 /* manual initialization control */ +#define SDRAM_INITPLR9 0x59 /* manual initialization control */ +#define SDRAM_INITPLR10 0x5a /* manual initialization control */ +#define SDRAM_INITPLR11 0x5b /* manual initialization control */ +#define SDRAM_INITPLR12 0x5c /* manual initialization control */ +#define SDRAM_INITPLR13 0x5d /* manual initialization control */ +#define SDRAM_INITPLR14 0x5e /* manual initialization control */ +#define SDRAM_INITPLR15 0x5f /* manual initialization control */ +#define SDRAM_RQDC 0x70 /* read DQS delay control */ +#define SDRAM_RFDC 0x74 /* read feedback delay control */ +#define SDRAM_RDCC 0x78 /* read data capture control */ +#define SDRAM_DLCR 0x7A /* delay line calibration */ +#define SDRAM_CLKTR 0x80 /* DDR clock timing */ +#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */ +#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */ +#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */ +#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */ +#define SDRAM_MMODE 0x88 /* memory mode */ +#define SDRAM_MEMODE 0x89 /* memory extended mode */ +#define SDRAM_ECCCR 0x98 /* ECC error status */ +#define SDRAM_CID 0xA4 /* core ID */ +#define SDRAM_RID 0xA8 /* revision ID */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Status ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */ +#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */ +#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */ +#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */ +#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */ +#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Options 1 ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/ +#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */ +#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */ +#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */ +#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/ +#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3) +#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */ +#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */ +#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */ +#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */ +#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */ +#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */ +#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */ +#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */ +#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */ +#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */ +#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */ +#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */ +#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */ +#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */ +#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */ +#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */ +#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */ +#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */ +#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */ +#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */ +#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */ +#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */ +#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */ +#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */ +#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */ +#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */ +#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */ +#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */ +#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Options 2 ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */ +#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */ +#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */ +#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */ +#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */ +#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */ +#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */ +#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */ +#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */ +#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */ +#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */ +#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */ +#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/ +#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */ +#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */ + +/*-----------------------------------------------------------------------------+ +| SDRAM Refresh Timer Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RTR_RINT_MASK 0xFFF80000 +#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16) +#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8) + +/*-----------------------------------------------------------------------------+ +| SDRAM Read DQS Delay Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RQDC_RQDE_MASK 0x80000000 +#define SDRAM_RQDC_RQDE_DISABLE 0x00000000 +#define SDRAM_RQDC_RQDE_ENABLE 0x80000000 +#define SDRAM_RQDC_RQFD_MASK 0x000001FF +#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0) + +#define SDRAM_RQDC_RQFD_MAX 0x1FF + +/*-----------------------------------------------------------------------------+ +| SDRAM Read Data Capture Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RDCC_RDSS_MASK 0xC0000000 +#define SDRAM_RDCC_RDSS_T1 0x00000000 +#define SDRAM_RDCC_RDSS_T2 0x40000000 +#define SDRAM_RDCC_RDSS_T3 0x80000000 +#define SDRAM_RDCC_RDSS_T4 0xC0000000 +#define SDRAM_RDCC_RSAE_MASK 0x00000001 +#define SDRAM_RDCC_RSAE_DISABLE 0x00000001 +#define SDRAM_RDCC_RSAE_ENABLE 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Read Feedback Delay Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RFDC_ARSE_MASK 0x80000000 +#define SDRAM_RFDC_ARSE_DISABLE 0x80000000 +#define SDRAM_RFDC_ARSE_ENABLE 0x00000000 +#define SDRAM_RFDC_RFOS_MASK 0x007F0000 +#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define SDRAM_RFDC_RFFD_MASK 0x000003FF +#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) + +#define SDRAM_RFDC_RFFD_MAX 0x7FF + +/*-----------------------------------------------------------------------------+ +| SDRAM Delay Line Calibration Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_DLCR_DCLM_MASK 0x80000000 +#define SDRAM_DLCR_DCLM_MANUEL 0x80000000 +#define SDRAM_DLCR_DCLM_AUTO 0x00000000 +#define SDRAM_DLCR_DLCR_MASK 0x08000000 +#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000 +#define SDRAM_DLCR_DLCR_IDLE 0x00000000 +#define SDRAM_DLCR_DLCS_MASK 0x07000000 +#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000 +#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000 +#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000 +#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000 +#define SDRAM_DLCR_DLCS_ERROR 0x04000000 +#define SDRAM_DLCR_DLCV_MASK 0x000001FF +#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0) +#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF) + +/*-----------------------------------------------------------------------------+ +| SDRAM Controller On Die Termination Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_CODT_ODT_ON 0x80000000 +#define SDRAM_CODT_ODT_OFF 0x00000000 +#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020 +#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000 +#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020 +#define SDRAM_CODT_DQS_MASK 0x00000010 +#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000 +#define SDRAM_CODT_DQS_SINGLE_END 0x00000010 +#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000 +#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008 +#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004 +#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002 +#define SDRAM_CODT_IO_HIZ 0x00000000 +#define SDRAM_CODT_IO_NMODE 0x00000001 + +/*-----------------------------------------------------------------------------+ +| SDRAM Mode Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_MMODE_WR_MASK 0x00000E00 +#define SDRAM_MMODE_WR_DDR1 0x00000000 +#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400 +#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600 +#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800 +#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00 +#define SDRAM_MMODE_DCL_MASK 0x00000070 +#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020 +#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060 +#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030 +#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020 +#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030 +#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040 +#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050 +#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060 +#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070 + +/*-----------------------------------------------------------------------------+ +| SDRAM Extended Mode Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_MEMODE_DIC_MASK 0x00000002 +#define SDRAM_MEMODE_DIC_NORMAL 0x00000000 +#define SDRAM_MEMODE_DIC_WEAK 0x00000002 +#define SDRAM_MEMODE_DLL_MASK 0x00000001 +#define SDRAM_MEMODE_DLL_DISABLE 0x00000001 +#define SDRAM_MEMODE_DLL_ENABLE 0x00000000 +#define SDRAM_MEMODE_RTT_MASK 0x00000044 +#define SDRAM_MEMODE_RTT_DISABLED 0x00000000 +#define SDRAM_MEMODE_RTT_75OHM 0x00000004 +#define SDRAM_MEMODE_RTT_150OHM 0x00000040 +#define SDRAM_MEMODE_DQS_MASK 0x00000400 +#define SDRAM_MEMODE_DQS_DISABLE 0x00000400 +#define SDRAM_MEMODE_DQS_ENABLE 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Clock Timing Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_CLKTR_CLKP_MASK 0xC0000000 +#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000 +#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Write Timing Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_WRDTR_LLWP_MASK 0x10000000 +#define SDRAM_WRDTR_LLWP_DIS 0x10000000 +#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000 +#define SDRAM_WRDTR_WTR_MASK 0x0E000000 +#define SDRAM_WRDTR_WTR_0_DEG 0x06000000 +#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000 +#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR1 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR1_LDOF_MASK 0x80000000 +#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000 +#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000 +#define SDRAM_SDTR1_RTW_MASK 0x00F00000 +#define SDRAM_SDTR1_RTW_2_CLK 0x00200000 +#define SDRAM_SDTR1_RTW_3_CLK 0x00300000 +#define SDRAM_SDTR1_WTWO_MASK 0x000F0000 +#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000 +#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000 +#define SDRAM_SDTR1_RTRO_MASK 0x0000F000 +#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000 +#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR2 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR2_RCD_MASK 0xF0000000 +#define SDRAM_SDTR2_RCD_1_CLK 0x10000000 +#define SDRAM_SDTR2_RCD_2_CLK 0x20000000 +#define SDRAM_SDTR2_RCD_3_CLK 0x30000000 +#define SDRAM_SDTR2_RCD_4_CLK 0x40000000 +#define SDRAM_SDTR2_RCD_5_CLK 0x50000000 +#define SDRAM_SDTR2_WTR_MASK 0x0F000000 +#define SDRAM_SDTR2_WTR_1_CLK 0x01000000 +#define SDRAM_SDTR2_WTR_2_CLK 0x02000000 +#define SDRAM_SDTR2_WTR_3_CLK 0x03000000 +#define SDRAM_SDTR2_WTR_4_CLK 0x04000000 +#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) +#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000 +#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000 +#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000 +#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000 +#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000 +#define SDRAM_SDTR2_WPC_MASK 0x0000F000 +#define SDRAM_SDTR2_WPC_2_CLK 0x00002000 +#define SDRAM_SDTR2_WPC_3_CLK 0x00003000 +#define SDRAM_SDTR2_WPC_4_CLK 0x00004000 +#define SDRAM_SDTR2_WPC_5_CLK 0x00005000 +#define SDRAM_SDTR2_WPC_6_CLK 0x00006000 +#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12) +#define SDRAM_SDTR2_RPC_MASK 0x00000F00 +#define SDRAM_SDTR2_RPC_2_CLK 0x00000200 +#define SDRAM_SDTR2_RPC_3_CLK 0x00000300 +#define SDRAM_SDTR2_RPC_4_CLK 0x00000400 +#define SDRAM_SDTR2_RP_MASK 0x000000F0 +#define SDRAM_SDTR2_RP_3_CLK 0x00000030 +#define SDRAM_SDTR2_RP_4_CLK 0x00000040 +#define SDRAM_SDTR2_RP_5_CLK 0x00000050 +#define SDRAM_SDTR2_RP_6_CLK 0x00000060 +#define SDRAM_SDTR2_RP_7_CLK 0x00000070 +#define SDRAM_SDTR2_RRD_MASK 0x0000000F +#define SDRAM_SDTR2_RRD_2_CLK 0x00000002 +#define SDRAM_SDTR2_RRD_3_CLK 0x00000003 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR3 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR3_RAS_MASK 0x1F000000 +#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define SDRAM_SDTR3_RC_MASK 0x001F0000 +#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define SDRAM_SDTR3_XCS_MASK 0x00001F00 +#define SDRAM_SDTR3_XCS 0x00000D00 +#define SDRAM_SDTR3_RFC_MASK 0x0000003F +#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) + +/*-----------------------------------------------------------------------------+ +| Memory Bank 0-1 configuration ++-----------------------------------------------------------------------------*/ +#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */ +#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */ +#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */ +#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */ +#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */ +#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */ +#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */ +#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */ +#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */ +#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */ +#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */ +#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */ +#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */ +#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */ +#endif /* CONFIG_440SPE */ + +#ifndef CONFIG_440_GX +#endif /* not CONFIG_440SPE */ + /*----------------------------------------------------------------------------- | External Bus Controller +----------------------------------------------------------------------------*/ @@ -503,7 +1053,7 @@ /*----------------------------------------------------------------------------- | L2 Cache +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440GX) || defined(CONFIG_440SP) +#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define L2_CACHE_BASE 0x030 #define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ #define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ @@ -526,7 +1076,7 @@ | Clocking, Power Management and Chip Control +----------------------------------------------------------------------------*/ #define CNTRL_DCR_BASE 0x0b0 -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */ #define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */ #define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */ @@ -574,6 +1124,30 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ +#if defined(CONFIG_440SPE) +#define UIC2_DCR_BASE 0xe0 +#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ +#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */ +#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */ +#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */ +#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */ +#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */ +#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */ +#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */ + +#define UIC3_DCR_BASE 0xf0 +#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */ +#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */ +#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */ +#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */ +#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */ +#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */ +#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */ +#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */ +#endif /* CONFIG_440SPE */ + #if defined(CONFIG_440GX) #define UIC2_DCR_BASE 0x210 #define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */ @@ -607,6 +1181,103 @@ #define uicvr uic0vr #define uicvcr uic0vcr +#if defined(CONFIG_440SPE) +/*----------------------------------------------------------------------------+ +| Clock / Power-on-reset DCR's. ++----------------------------------------------------------------------------*/ +#define CPR0_CFGADDR 0x00C +#define CPR0_CFGDATA 0x00D + +#define CPR0_CLKUPD 0x20 +#define CPR0_CLKUPD_BSY_MASK 0x80000000 +#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000 +#define CPR0_CLKUPD_BSY_BUSY 0x80000000 +#define CPR0_CLKUPD_CUI_MASK 0x80000000 +#define CPR0_CLKUPD_CUI_DISABLE 0x00000000 +#define CPR0_CLKUPD_CUI_ENABLE 0x80000000 +#define CPR0_CLKUPD_CUD_MASK 0x40000000 +#define CPR0_CLKUPD_CUD_DISABLE 0x00000000 +#define CPR0_CLKUPD_CUD_ENABLE 0x40000000 + +#define CPR0_PLLC 0x40 +#define CPR0_PLLC_RST_MASK 0x80000000 +#define CPR0_PLLC_RST_PLLLOCKED 0x00000000 +#define CPR0_PLLC_RST_PLLRESET 0x80000000 +#define CPR0_PLLC_ENG_MASK 0x40000000 +#define CPR0_PLLC_ENG_DISABLE 0x00000000 +#define CPR0_PLLC_ENG_ENABLE 0x40000000 +#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define CPR0_PLLC_SRC_MASK 0x20000000 +#define CPR0_PLLC_SRC_PLLOUTA 0x00000000 +#define CPR0_PLLC_SRC_PLLOUTB 0x20000000 +#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define CPR0_PLLC_SEL_MASK 0x07000000 +#define CPR0_PLLC_SEL_PLLOUT 0x00000000 +#define CPR0_PLLC_SEL_CPU 0x01000000 +#define CPR0_PLLC_SEL_EBC 0x05000000 +#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07) +#define CPR0_PLLC_TUNE_MASK 0x000003FF +#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define CPR0_PLLD 0x60 +#define CPR0_PLLD_FBDV_MASK 0x1F000000 +#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1) +#define CPR0_PLLD_FWDVA_MASK 0x000F0000 +#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16) +#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1) +#define CPR0_PLLD_FWDVB_MASK 0x00000700 +#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8) +#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1) +#define CPR0_PLLD_LFBDV_MASK 0x0000003F +#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) + +#define CPR0_PRIMAD 0x80 +#define CPR0_PRIMAD_PRADV0_MASK 0x07000000 +#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) + +#define CPR0_PRIMBD 0xA0 +#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000 +#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) + +#define CPR0_OPBD 0xC0 +#define CPR0_OPBD_OPBDV0_MASK 0x03000000 +#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_PERD 0xE0 +#define CPR0_PERD_PERDV0_MASK 0x03000000 +#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_MALD 0x100 +#define CPR0_MALD_MALDV0_MASK 0x03000000 +#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_ICFG 0x140 +#define CPR0_ICFG_RLI_MASK 0x80000000 +#define CPR0_ICFG_RLI_RESETCPR 0x00000000 +#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000 +#define CPR0_ICFG_ICS_MASK 0x00000007 +#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) + +/************************/ +/* IIC defines */ +/************************/ +#define IIC0_MMIO_BASE 0xA0000400 +#define IIC1_MMIO_BASE 0xA0000500 + +#endif /* CONFIG_440SP */ + /*----------------------------------------------------------------------------- | DMA +----------------------------------------------------------------------------*/ @@ -722,7 +1393,7 @@ #define UIC_GPTCT 0x00000004 /* GPT count timer */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#else /* CONFIG_440SP */ +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) #define UIC_U0 0x80000000 /* UART 0 */ #define UIC_U1 0x40000000 /* UART 1 */ #define UIC_IIC0 0x20000000 /* IIC */ @@ -755,7 +1426,40 @@ #define UIC_EIR6 0x00000004 /* External interrupt 6 */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#endif /* CONFIG_440SP */ +#elif !defined(CONFIG_440SPE) +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_IIC1 0x10000000 /* IIC */ +#define UIC_PIM 0x08000000 /* PCI inbound message */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */ +#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ +#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ +#define UIC_MTE 0x00200000 /* MAL TXEOB */ +#define UIC_MRE 0x00100000 /* MAL RXEOB */ +#define UIC_D0 0x00080000 /* DMA channel 0 */ +#define UIC_D1 0x00040000 /* DMA channel 1 */ +#define UIC_D2 0x00020000 /* DMA channel 2 */ +#define UIC_D3 0x00010000 /* DMA channel 3 */ +#define UIC_RSVD0 0x00008000 /* Reserved */ +#define UIC_RSVD1 0x00004000 /* Reserved */ +#define UIC_CT0 0x00002000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00001000 /* GPT compare timer 1 */ +#define UIC_CT2 0x00000800 /* GPT compare timer 2 */ +#define UIC_CT3 0x00000400 /* GPT compare timer 3 */ +#define UIC_CT4 0x00000200 /* GPT compare timer 4 */ +#define UIC_EIR0 0x00000100 /* External interrupt 0 */ +#define UIC_EIR1 0x00000080 /* External interrupt 1 */ +#define UIC_EIR2 0x00000040 /* External interrupt 2 */ +#define UIC_EIR3 0x00000020 /* External interrupt 3 */ +#define UIC_EIR4 0x00000010 /* External interrupt 4 */ +#define UIC_EIR5 0x00000008 /* External interrupt 5 */ +#define UIC_EIR6 0x00000004 /* External interrupt 6 */ +#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ +#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ +#endif /* CONFIG_440GX */ /* For compatibility with 405 code */ #define UIC_MAL_TXEOB UIC_MTE @@ -797,7 +1501,40 @@ #define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ #define UIC_ETH1 0x00000002 /* Reserved */ #define UIC_XOR 0x00000001 /* XOR */ -#else /* CONFIG_440SP */ +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) +#define UIC_MS 0x80000000 /* MAL SERR */ +#define UIC_MTDE 0x40000000 /* MAL TXDE */ +#define UIC_MRDE 0x20000000 /* MAL RXDE */ +#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/ +#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_EBMI 0x02000000 /* EBMI interrupt status */ +#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */ +#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */ +#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */ +#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */ +#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */ +#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */ +#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */ +#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */ +#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */ +#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */ +#define UIC_PPMI 0x00004000 /* PPM interrupt status */ +#define UIC_EIR7 0x00002000 /* External interrupt 7 */ +#define UIC_EIR8 0x00001000 /* External interrupt 8 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_EIR10 0x00000400 /* External interrupt 10 */ +#define UIC_EIR11 0x00000200 /* External interrupt 11 */ +#define UIC_EIR12 0x00000100 /* External interrupt 12 */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_RSVD2 0x00000040 /* Reserved */ +#define UIC_RSVD3 0x00000020 /* Reserved */ +#define UIC_PAE 0x00000010 /* PCI asynchronous error */ +#define UIC_ETH0 0x00000008 /* Ethernet 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_ETH1 0x00000002 /* Ethernet 1 */ +#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ +#elif !defined(CONFIG_440SPE) #define UIC_MS 0x80000000 /* MAL SERR */ #define UIC_MTDE 0x40000000 /* MAL TXDE */ #define UIC_MRDE 0x20000000 /* MAL RXDE */ @@ -889,7 +1626,118 @@ #define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) -#endif /* CONFIG_440GX */ +#endif /* CONFIG_440_GX */ +/*---------------------------------------------------------------------------+ +| Universal interrupt controller interrupts ++---------------------------------------------------------------------------*/ +#if defined(CONFIG_440SPE) +/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */ +/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */ +#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */ +#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */ +#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \ + UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI) +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 0 interrupts (UIC0) ++---------------------------------------------------------------------------*/ +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_IIC1 0x10000000 /* IIC */ +#define UIC_PIM 0x08000000 /* PCI inbound message */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */ +#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */ +#define UIC_EIR15 0x00400000 /* External intp 15 */ +#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */ +#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */ +#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */ +#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */ +#define UIC_EIR14 0x00002000 /* External interrupt 14 */ +#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */ +#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */ +#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */ +#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */ +#define UIC_I2OID 0x00000100 /* I2O inbound door bell */ +#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */ +#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */ +#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */ +#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */ +#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */ +#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */ +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 1 interrupts (UIC1) ++---------------------------------------------------------------------------*/ +#define UIC_EIR13 0x80000000 /* externei intp 13 */ +#define UIC_MS 0x40000000 /* MAL SERR */ +#define UIC_MTDE 0x20000000 /* MAL TXDE */ +#define UIC_MRDE 0x10000000 /* MAL RXDE */ +#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_MTE 0x02000000 /* MAL TXEOB */ +#define UIC_MRE 0x01000000 /* MAL RXEOB */ +#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ +#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ +#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */ +#define UIC_L2C 0x00100000 /* L2 cache */ +#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ +#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ +#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ +#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ +#define UIC_EIR12 0x00004000 /* External interrupt 12 */ +#define UIC_EIR11 0x00002000 /* External interrupt 11 */ +#define UIC_EIR10 0x00001000 /* External interrupt 10 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_EIR8 0x00000400 /* External interrupt 8 */ +#define UIC_DMAE 0x00000200 /* dma error */ +#define UIC_I2OE 0x00000100 /* i2o error */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */ +#define UIC_EIR7 0x00000020 /* External interrupt 7 */ +#define UIC_EIR6 0x00000010 /* External interrupt 6 */ +#define UIC_ETH0 0x00000008 /* Ethernet 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_ETH1 0x00000002 /* reserved */ +#define UIC_XOR 0x00000001 /* xor */ + +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 2 interrupts (UIC2) ++---------------------------------------------------------------------------*/ +#define UIC_PEOAL 0x80000000 /* PE0 AL */ +#define UIC_PEOVA 0x40000000 /* PE0 VPD access */ +#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */ +#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */ +#define UIC_PE0TCR 0x08000000 /* PE0 TCR */ +#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */ +#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */ +#define UIC_PE1AL 0x00800000 /* PE1 AL */ +#define UIC_PE1VA 0x00400000 /* PE1 VPD access */ +#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */ +#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */ +#define UIC_PE1TCR 0x00080000 /* PE1 TCR */ +#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */ +#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */ +#define UIC_PE2AL 0x00008000 /* PE2 AL */ +#define UIC_PE2VA 0x00004000 /* PE2 VPD access */ +#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */ +#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */ +#define UIC_PE2TCR 0x00000800 /* PE2 TCR */ +#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */ +#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */ +#define UIC_EIR5 0x00000080 /* External interrupt 5 */ +#define UIC_EIR4 0x00000040 /* External interrupt 4 */ +#define UIC_EIR3 0x00000020 /* External interrupt 3 */ +#define UIC_EIR2 0x00000010 /* External interrupt 2 */ +#define UIC_EIR1 0x00000008 /* External interrupt 1 */ +#define UIC_EIR0 0x00000004 /* External interrupt 0 */ +#endif /* CONFIG_440SPE */ /*-----------------------------------------------------------------------------+ | External Bus Controller Bit Settings @@ -981,6 +1829,432 @@ /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_440SPE) +#define SDR0_CP440 0x0180 +#define SDR0_CP440_ERPN_MASK 0x30000000 +#define SDR0_CP440_ERPN_MASK_HI 0x3000 +#define SDR0_CP440_ERPN_MASK_LO 0x0000 +#define SDR0_CP440_ERPN_EBC 0x10000000 +#define SDR0_CP440_ERPN_EBC_HI 0x1000 +#define SDR0_CP440_ERPN_EBC_LO 0x0000 +#define SDR0_CP440_ERPN_PCI 0x20000000 +#define SDR0_CP440_ERPN_PCI_HI 0x2000 +#define SDR0_CP440_ERPN_PCI_LO 0x0000 +#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28) +#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03) +#define SDR0_CP440_NTO1_MASK 0x00000002 +#define SDR0_CP440_NTO1_NTOP 0x00000000 +#define SDR0_CP440_NTO1_NTO1 0x00000002 +#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1) +#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01) +#define SDR0_CFGADDR 0x00E /*already defined line 277 */ +#define SDR0_CFGDATA 0x00F + + +#define SDR0_SDSTP0 0x0020 +#define SDR0_SDSTP0_ENG_MASK 0x80000000 +#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000 +#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000 +#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_SDSTP0_SRC_MASK 0x40000000 +#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000 +#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000 +#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_SDSTP0_SEL_MASK 0x38000000 +#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000 +#define SDR0_SDSTP0_SEL_CPU 0x08000000 +#define SDR0_SDSTP0_SEL_EBC 0x28000000 +#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27) +#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07) +#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000 +#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17) +#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF) +#define SDR0_SDSTP0_FBDV_MASK 0x0001F000 +#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) +#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1) +#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00 +#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8) +#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1) +#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0 +#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5) +#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1) +#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C +#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2) +#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1) +#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003 +#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0) +#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1) + + +#define SDR0_SDSTP1 0x0021 +#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000 +#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26) +#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F) +#define SDR0_SDSTP1_PERDV0_MASK 0x03000000 +#define SDR0_SDSTP1_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define SDR0_SDSTP1_PERDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03) +#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000 +#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22) +#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03) +#define SDR0_SDSTP1_DDR_MODE_MASK 0x00300000 +#define SDR0_SDSTP1_DDR1_MODE 0x00100000 +#define SDR0_SDSTP1_DDR2_MODE 0x00200000 +#define SDR0_SDSTP1_DDR_ENCODE(n) ((((unsigned long)(n))&0x03)<<20) +#define SDR0_SDSTP1_DDR_DECODE(n) ((((unsigned long)(n))>>20)&0x03) +#define SDR0_SDSTP1_ERPN_MASK 0x00080000 +#define SDR0_SDSTP1_ERPN_EBC 0x00000000 +#define SDR0_SDSTP1_ERPN_PCI 0x00080000 +#define SDR0_SDSTP1_PAE_MASK 0x00040000 +#define SDR0_SDSTP1_PAE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PAE_ENABLE 0x00040000 +#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18) +#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01) +#define SDR0_SDSTP1_PHCE_MASK 0x00020000 +#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000 +#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17) +#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01) +#define SDR0_SDSTP1_PISE_MASK 0x00010000 +#define SDR0_SDSTP1_PISE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PISE_ENABLE 0x00001000 +#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16) +#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01) +#define SDR0_SDSTP1_PCWE_MASK 0x00008000 +#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000 +#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15) +#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01) +#define SDR0_SDSTP1_PPIM_MASK 0x00007800 +#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11) +#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F) +#define SDR0_SDSTP1_PR64E_MASK 0x00000400 +#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000 +#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400 +#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10) +#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01) +#define SDR0_SDSTP1_PXFS_MASK 0x00000300 +#define SDR0_SDSTP1_PXFS_100_133 0x00000000 +#define SDR0_SDSTP1_PXFS_66_100 0x00000100 +#define SDR0_SDSTP1_PXFS_50_66 0x00000200 +#define SDR0_SDSTP1_PXFS_0_50 0x00000300 +#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03) +#define SDR0_SDSTP1_EBCW_MASK 0x00000080 /* SOP */ +#define SDR0_SDSTP1_EBCW_8_BITS 0x00000000 /* SOP */ +#define SDR0_SDSTP1_EBCW_16_BITS 0x00000080 /* SOP */ +#define SDR0_SDSTP1_DBGEN_MASK 0x00000030 /* $218C */ +#define SDR0_SDSTP1_DBGEN_FUNC 0x00000000 +#define SDR0_SDSTP1_DBGEN_TRACE 0x00000010 +#define SDR0_SDSTP1_DBGEN_ENCODE(n) ((((unsigned long)(n))&0x03)<<4) /* $218C */ +#define SDR0_SDSTP1_DBGEN_DECODE(n) ((((unsigned long)(n))>>4)&0x03) /* $218C */ +#define SDR0_SDSTP1_ETH_MASK 0x00000004 +#define SDR0_SDSTP1_ETH_10_100 0x00000000 +#define SDR0_SDSTP1_ETH_GIGA 0x00000004 +#define SDR0_SDSTP1_ETH_ENCODE(n) ((((unsigned long)(n))&0x01)<<2) +#define SDR0_SDSTP1_ETH_DECODE(n) ((((unsigned long)(n))>>2)&0x01) +#define SDR0_SDSTP1_NTO1_MASK 0x00000001 +#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000 +#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001 +#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0) +#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01) + +#define SDR0_SDSTP2 0x0022 +#define SDR0_SDSTP2_P1AE_MASK 0x80000000 +#define SDR0_SDSTP2_P1AE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1AE_ENABLE 0x80000000 +#define SDR0_SDSTP2_P1AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_SDSTP2_P1AE_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_SDSTP2_P1HCE_MASK 0x40000000 +#define SDR0_SDSTP2_P1HCE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1HCE_ENABLE 0x40000000 +#define SDR0_SDSTP2_P1HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_SDSTP2_P1HCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_SDSTP2_P1ISE_MASK 0x20000000 +#define SDR0_SDSTP2_P1ISE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1ISE_ENABLE 0x20000000 +#define SDR0_SDSTP2_P1ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define SDR0_SDSTP2_P1ISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define SDR0_SDSTP2_P1CWE_MASK 0x10000000 +#define SDR0_SDSTP2_P1CWE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1CWE_ENABLE 0x10000000 +#define SDR0_SDSTP2_P1CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28) +#define SDR0_SDSTP2_P1CWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01) +#define SDR0_SDSTP2_P1PIM_MASK 0x0F000000 +#define SDR0_SDSTP2_P1PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24) +#define SDR0_SDSTP2_P1PIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) +#define SDR0_SDSTP2_P1R64E_MASK 0x00800000 +#define SDR0_SDSTP2_P1R64E_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1R64E_ENABLE 0x00800000 +#define SDR0_SDSTP2_P1R64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23) +#define SDR0_SDSTP2_P1R64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01) +#define SDR0_SDSTP2_P1XFS_MASK 0x00600000 +#define SDR0_SDSTP2_P1XFS_100_133 0x00000000 +#define SDR0_SDSTP2_P1XFS_66_100 0x00200000 +#define SDR0_SDSTP2_P1XFS_50_66 0x00400000 +#define SDR0_SDSTP2_P1XFS_0_50 0x00600000 +#define SDR0_SDSTP2_P1XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21) +#define SDR0_SDSTP2_P1XFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03) +#define SDR0_SDSTP2_P2AE_MASK 0x00040000 +#define SDR0_SDSTP2_P2AE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2AE_ENABLE 0x00040000 +#define SDR0_SDSTP2_P2AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18) +#define SDR0_SDSTP2_P2AE_DECODE(n) ((((unsigned long)(n))>>18)&0x01) +#define SDR0_SDSTP2_P2HCE_MASK 0x00020000 +#define SDR0_SDSTP2_P2HCE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2HCE_ENABLE 0x00020000 +#define SDR0_SDSTP2_P2HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17) +#define SDR0_SDSTP2_P2HCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01) +#define SDR0_SDSTP2_P2ISE_MASK 0x00010000 +#define SDR0_SDSTP2_P2ISE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2ISE_ENABLE 0x00010000 +#define SDR0_SDSTP2_P2ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16) +#define SDR0_SDSTP2_P2ISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01) +#define SDR0_SDSTP2_P2CWE_MASK 0x00008000 +#define SDR0_SDSTP2_P2CWE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2CWE_ENABLE 0x00008000 +#define SDR0_SDSTP2_P2CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15) +#define SDR0_SDSTP2_P2CWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01) +#define SDR0_SDSTP2_P2PIM_MASK 0x00007800 +#define SDR0_SDSTP2_P2PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11) +#define SDR0_SDSTP2_P2PIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F) +#define SDR0_SDSTP2_P2XFS_MASK 0x00000300 +#define SDR0_SDSTP2_P2XFS_100_133 0x00000000 +#define SDR0_SDSTP2_P2XFS_66_100 0x00000100 +#define SDR0_SDSTP2_P2XFS_50_66 0x00000200 +#define SDR0_SDSTP2_P2XFS_0_50 0x00000100 +#define SDR0_SDSTP2_P2XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define SDR0_SDSTP2_P2XFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03) + +#define SDR0_SDSTP3 0x0023 + +#define SDR0_PINSTP 0x0040 +#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */ +#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 (EBC boot) */ +#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1 (PCI boot) */ +#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled - Addr = 0x54 */ +#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled - Addr = 0x50 */ +#define SDR0_SDCS 0x0060 +#define SDR0_ECID0 0x0080 +#define SDR0_ECID1 0x0081 +#define SDR0_ECID2 0x0082 +#define SDR0_JTAG 0x00C0 + +#define SDR0_DDR0 0x00E1 +#define SDR0_DDR0_DPLLRST 0x80000000 +#define SDR0_DDR0_DDRM_MASK 0x60000000 +#define SDR0_DDR0_DDRM_DDR1 0x20000000 +#define SDR0_DDR0_DDRM_DDR2 0x40000000 +#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29) +#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03) +#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0) +#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF) + +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UARTX_UXICS_MASK 0xF0000000 +#define SDR0_UARTX_UXICS_PLB 0x20000000 +#define SDR0_UARTX_UXEC_MASK 0x00800000 +#define SDR0_UARTX_UXEC_INT 0x00000000 +#define SDR0_UARTX_UXEC_EXT 0x00800000 +#define SDR0_UARTX_UXDIV_MASK 0x000000FF +#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1) + +#define SDR0_CP440 0x0180 +#define SDR0_CP440_ERPN_MASK 0x30000000 +#define SDR0_CP440_ERPN_MASK_HI 0x3000 +#define SDR0_CP440_ERPN_MASK_LO 0x0000 +#define SDR0_CP440_ERPN_EBC 0x10000000 +#define SDR0_CP440_ERPN_EBC_HI 0x1000 +#define SDR0_CP440_ERPN_EBC_LO 0x0000 +#define SDR0_CP440_ERPN_PCI 0x20000000 +#define SDR0_CP440_ERPN_PCI_HI 0x2000 +#define SDR0_CP440_ERPN_PCI_LO 0x0000 +#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28) +#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03) +#define SDR0_CP440_NTO1_MASK 0x00000002 +#define SDR0_CP440_NTO1_NTOP 0x00000000 +#define SDR0_CP440_NTO1_NTO1 0x00000002 +#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1) +#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01) + +#define SDR0_XCR0 0x01C0 +#define SDR0_XCR1 0x01C3 +#define SDR0_XCR2 0x01C6 +#define SDR0_XCRn_PAE_MASK 0x80000000 +#define SDR0_XCRn_PAE_DISABLE 0x00000000 +#define SDR0_XCRn_PAE_ENABLE 0x80000000 +#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_XCRn_PHCE_MASK 0x40000000 +#define SDR0_XCRn_PHCE_DISABLE 0x00000000 +#define SDR0_XCRn_PHCE_ENABLE 0x40000000 +#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_XCRn_PISE_MASK 0x20000000 +#define SDR0_XCRn_PISE_DISABLE 0x00000000 +#define SDR0_XCRn_PISE_ENABLE 0x20000000 +#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define SDR0_XCRn_PCWE_MASK 0x10000000 +#define SDR0_XCRn_PCWE_DISABLE 0x00000000 +#define SDR0_XCRn_PCWE_ENABLE 0x10000000 +#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28) +#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01) +#define SDR0_XCRn_PPIM_MASK 0x0F000000 +#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24) +#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) +#define SDR0_XCRn_PR64E_MASK 0x00800000 +#define SDR0_XCRn_PR64E_DISABLE 0x00000000 +#define SDR0_XCRn_PR64E_ENABLE 0x00800000 +#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23) +#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01) +#define SDR0_XCRn_PXFS_MASK 0x00600000 +#define SDR0_XCRn_PXFS_100_133 0x00000000 +#define SDR0_XCRn_PXFS_66_100 0x00200000 +#define SDR0_XCRn_PXFS_50_66 0x00400000 +#define SDR0_XCRn_PXFS_0_33 0x00600000 +#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21) +#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03) + +#define SDR0_XPLLC0 0x01C1 +#define SDR0_XPLLD0 0x01C2 +#define SDR0_XPLLC1 0x01C4 +#define SDR0_XPLLD1 0x01C5 +#define SDR0_XPLLC2 0x01C7 +#define SDR0_XPLLD2 0x01C8 +#define SDR0_SRST 0x0200 +#define SDR0_SLPIPE 0x0220 + +#define SDR0_AMP0 0x0240 +#define SDR0_AMP0_PRIORITY 0xFFFF0000 +#define SDR0_AMP0_ALTERNATE_PRIORITY 0x0000FF00 +#define SDR0_AMP0_RESERVED_BITS_MASK 0x000000FF + +#define SDR0_AMP1 0x0241 +#define SDR0_AMP1_PRIORITY 0xFC000000 +#define SDR0_AMP1_ALTERNATE_PRIORITY 0x0000E000 +#define SDR0_AMP1_RESERVED_BITS_MASK 0x03FF1FFF + +#define SDR0_MIRQ0 0x0260 +#define SDR0_MIRQ1 0x0261 +#define SDR0_MALTBL 0x0280 +#define SDR0_MALRBL 0x02A0 +#define SDR0_MALTBS 0x02C0 +#define SDR0_MALRBS 0x02E0 + +/* Reserved for Customer Use */ +#define SDR0_CUST0 0x4000 +#define SDR0_CUST0_AUTONEG_MASK 0x8000000 +#define SDR0_CUST0_NO_AUTONEG 0x0000000 +#define SDR0_CUST0_AUTONEG 0x8000000 +#define SDR0_CUST0_ETH_FORCE_MASK 0x6000000 +#define SDR0_CUST0_ETH_FORCE_10MHZ 0x0000000 +#define SDR0_CUST0_ETH_FORCE_100MHZ 0x2000000 +#define SDR0_CUST0_ETH_FORCE_1000MHZ 0x4000000 +#define SDR0_CUST0_ETH_DUPLEX_MASK 0x1000000 +#define SDR0_CUST0_ETH_HALF_DUPLEX 0x0000000 +#define SDR0_CUST0_ETH_FULL_DUPLEX 0x1000000 + +#define SDR0_SDSTP4 0x4001 +#define SDR0_CUST1 0x4002 +#define SDR0_SDSTP5 0x4003 +#define SDR0_CUST2 0x4004 +#define SDR0_SDSTP6 0x4005 +#define SDR0_CUST3 0x4006 +#define SDR0_SDSTP7 0x4007 + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC0_GPIO_0 0x80000000 +#define SDR0_PFC0_PCIX0REQ2_N 0x00000000 +#define SDR0_PFC0_GPIO_1 0x40000000 +#define SDR0_PFC0_PCIX0REQ3_N 0x00000000 +#define SDR0_PFC0_GPIO_2 0x20000000 +#define SDR0_PFC0_PCIX0GNT2_N 0x00000000 +#define SDR0_PFC0_GPIO_3 0x10000000 +#define SDR0_PFC0_PCIX0GNT3_N 0x00000000 +#define SDR0_PFC0_GPIO_4 0x08000000 +#define SDR0_PFC0_PCIX1REQ2_N 0x00000000 +#define SDR0_PFC0_GPIO_5 0x04000000 +#define SDR0_PFC0_PCIX1REQ3_N 0x00000000 +#define SDR0_PFC0_GPIO_6 0x02000000 +#define SDR0_PFC0_PCIX1GNT2_N 0x00000000 +#define SDR0_PFC0_GPIO_7 0x01000000 +#define SDR0_PFC0_PCIX1GNT3_N 0x00000000 +#define SDR0_PFC0_GPIO_8 0x00800000 +#define SDR0_PFC0_PERREADY 0x00000000 +#define SDR0_PFC0_GPIO_9 0x00400000 +#define SDR0_PFC0_PERCS1_N 0x00000000 +#define SDR0_PFC0_GPIO_10 0x00200000 +#define SDR0_PFC0_PERCS2_N 0x00000000 +#define SDR0_PFC0_GPIO_11 0x00100000 +#define SDR0_PFC0_IRQ0 0x00000000 +#define SDR0_PFC0_GPIO_12 0x00080000 +#define SDR0_PFC0_IRQ1 0x00000000 +#define SDR0_PFC0_GPIO_13 0x00040000 +#define SDR0_PFC0_IRQ2 0x00000000 +#define SDR0_PFC0_GPIO_14 0x00020000 +#define SDR0_PFC0_IRQ3 0x00000000 +#define SDR0_PFC0_GPIO_15 0x00010000 +#define SDR0_PFC0_IRQ4 0x00000000 +#define SDR0_PFC0_GPIO_16 0x00008000 +#define SDR0_PFC0_IRQ5 0x00000000 +#define SDR0_PFC0_GPIO_17 0x00004000 +#define SDR0_PFC0_PERBE0_N 0x00000000 +#define SDR0_PFC0_GPIO_18 0x00002000 +#define SDR0_PFC0_PCI0GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_19 0x00001000 +#define SDR0_PFC0_PCI0GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_20 0x00000800 +#define SDR0_PFC0_PCI0REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_21 0x00000400 +#define SDR0_PFC0_PCI0REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_22 0x00000200 +#define SDR0_PFC0_PCI1GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_23 0x00000100 +#define SDR0_PFC0_PCI1GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_24 0x00000080 +#define SDR0_PFC0_PCI1REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_25 0x00000040 +#define SDR0_PFC0_PCI1REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_26 0x00000020 +#define SDR0_PFC0_PCI2GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_27 0x00000010 +#define SDR0_PFC0_PCI2GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_28 0x00000008 +#define SDR0_PFC0_PCI2REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_29 0x00000004 +#define SDR0_PFC0_PCI2REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_30 0x00000002 +#define SDR0_PFC0_UART1RX 0x00000000 +#define SDR0_PFC0_GPIO_31 0x00000001 +#define SDR0_PFC0_UART1TX 0x00000000 + +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_UART1_CTS_RTS_MASK 0x02000000 +#define SDR0_PFC1_UART1_DSR_DTR 0x00000000 +#define SDR0_PFC1_UART1_CTS_RTS 0x02000000 +#define SDR0_PFC1_UART2_IN_SERVICE_MASK 0x01000000 +#define SDR0_PFC1_UART2_NOT_IN_SERVICE 0x00000000 +#define SDR0_PFC1_UART2_IN_SERVICE 0x01000000 +#define SDR0_PFC1_ETH_GIGA_MASK 0x00200000 +#define SDR0_PFC1_ETH_10_100 0x00000000 +#define SDR0_PFC1_ETH_GIGA 0x00200000 +#define SDR0_PFC1_ETH_GIGA_ENCODE(n) ((((unsigned long)(n))&0x1)<<21) +#define SDR0_PFC1_ETH_GIGA_DECODE(n) ((((unsigned long)(n))>>21)&0x01) +#define SDR0_PFC1_CPU_TRACE_MASK 0x00180000 /* $218C */ +#define SDR0_PFC1_CPU_NO_TRACE 0x00000000 +#define SDR0_PFC1_CPU_TRACE 0x00080000 +#define SDR0_PFC1_CPU_TRACE_ENCODE(n) ((((unsigned long)(n))&0x3)<<19) /* $218C */ +#define SDR0_PFC1_CPU_TRACE_DECODE(n) ((((unsigned long)(n))>>19)&0x03) /* $218C */ + +#define SDR0_MFR 0x4300 +#endif /* CONFIG_440SPE */ + + #define SDR0_SDCS_SDD (0x80000000 >> 31) #if defined(CONFIG_440GP) @@ -1159,7 +2433,7 @@ /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) +#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -1448,6 +2722,9 @@ typedef struct { unsigned long freqOPB; unsigned long freqEPB; unsigned long freqPCI; +#ifdef CONFIG_440SPE + unsigned long freqDDR; +#endif unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ unsigned long pciClkSync; /* PCI clock is synchronous */ } PPC440_SYS_INFO; diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index d6d33b6..ec2e362 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -133,12 +133,21 @@ typedef struct emac_4xx_hw_st { #define EMAC_NUM_DEV 4 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \ defined(CONFIG_NET_MULTI) && \ - !defined(CONFIG_440SP) + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define EMAC_NUM_DEV 2 #else #define EMAC_NUM_DEV 1 #endif +#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ +#define EMAC_STACR_OC_MASK (0x00008000) +#else +#define EMAC_STACR_OC_MASK (0x00000000) +#endif + +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#define SDR0_PFC1_EM_1000 (0x00200000) +#endif /*ZMII Bridge Register addresses */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) @@ -323,7 +332,7 @@ typedef struct emac_4xx_hw_st { #define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* MODE Reg 1 */ #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) @@ -424,8 +433,21 @@ typedef struct emac_4xx_hw_st { /* STA CONTROL REG */ #define EMAC_STACR_OC (0x00008000) #define EMAC_STACR_PHYE (0x00004000) + +#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ +#define EMAC_STACR_INDIRECT_MODE (0x00002000) +#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ +#define EMAC_STACR_READ (0x00001000) /* $BUC */ +#define EMAC_STACR_OP_MASK (0x00001800) +#define EMAC_STACR_MDIO_ADDR (0x00000000) +#define EMAC_STACR_MDIO_WRITE (0x00000800) +#define EMAC_STACR_MDIO_READ (0x00001800) +#define EMAC_STACR_MDIO_READ_INC (0x00001000) +#else #define EMAC_STACR_WRITE (0x00002000) #define EMAC_STACR_READ (0x00001000) +#endif + #define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */ #define EMAC_STACR_CLK_66MHZ (0x00000400) #define EMAC_STACR_CLK_100MHZ (0x00000C00) |