aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/dts/Makefile2
-rw-r--r--arch/arm/mach-stm32mp/Kconfig4
-rw-r--r--arch/arm/mach-stm32mp/Kconfig.13x4
-rw-r--r--arch/arm/mach-stm32mp/Makefile2
-rw-r--r--arch/arm/mach-stm32mp/cmd_stm32key.c10
-rw-r--r--arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h2
-rw-r--r--arch/arm/mach-stm32mp/include/mach/stm32.h8
-rw-r--r--arch/arm/mach-stm32mp/stm32mp1/Makefile2
-rw-r--r--arch/arm/mach-stm32mp/stm32mp1/fdt.c4
-rw-r--r--board/st/common/Kconfig2
-rw-r--r--board/st/stm32mp1/Kconfig2
-rw-r--r--configs/stm32mp13_defconfig4
-rw-r--r--drivers/clk/stm32/Kconfig2
13 files changed, 24 insertions, 24 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 89c2986..9542303 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1361,7 +1361,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
-dtb-$(CONFIG_STM32MP13x) += \
+dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
dtb-$(CONFIG_STM32MP15x) += \
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 5fc92d0..241fcf3 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -37,7 +37,7 @@ choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
default STM32MP15x
-config STM32MP13x
+config STM32MP13X
bool "Support STMicroelectronics STM32MP13x Soc"
select ARM_SMCCC
select CPU_V7A
@@ -127,7 +127,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
- depends on STM32MP15x || STM32MP13x
+ depends on STM32MP15x || STM32MP13X
default y
imply BOOTP_SERVERIP
help
diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
index acc02a5..4d74b35 100644
--- a/arch/arm/mach-stm32mp/Kconfig.13x
+++ b/arch/arm/mach-stm32mp/Kconfig.13x
@@ -1,10 +1,10 @@
-if STM32MP13x
+if STM32MP13X
choice
prompt "STM32MP13x board select"
optional
-config TARGET_ST_STM32MP13x
+config TARGET_ST_STM32MP13X
bool "STMicroelectronics STM32MP13x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index fdcbbf9..3d194de 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -9,7 +9,7 @@ obj-y += bsec.o
obj-y += soc.o
obj-$(CONFIG_STM32MP15x) += stm32mp1/
-obj-$(CONFIG_STM32MP13x) += stm32mp1/
+obj-$(CONFIG_STM32MP13X) += stm32mp1/
obj-$(CONFIG_STM32MP25X) += stm32mp2/
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index e16fcf4..dcef6ac 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -19,7 +19,7 @@
* STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device
*/
#define STM32_OTP_CLOSE_ID 0
-#define STM32_OTP_STM32MP13x_CLOSE_MASK 0x3F
+#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
#define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */
@@ -61,7 +61,7 @@ static u8 stm32key_index;
static u8 get_key_nb(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return ARRAY_SIZE(stm32mp13_list);
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -70,7 +70,7 @@ static u8 get_key_nb(void)
static const struct stm32key *get_key(u8 index)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return &stm32mp13_list[index];
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -79,8 +79,8 @@ static const struct stm32key *get_key(u8 index)
static u32 get_otp_close_mask(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
- return STM32_OTP_STM32MP13x_CLOSE_MASK;
+ if (IS_ENABLED(CONFIG_STM32MP13X))
+ return STM32_OTP_STM32MP13X_CLOSE_MASK;
if (IS_ENABLED(CONFIG_STM32MP15x))
return STM32_OTP_STM32MP15x_CLOSE_MASK;
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index eda98eb..934ffb1 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -30,7 +30,7 @@
#endif
/* size of the OTP struct in NVMEM PTA */
#define _OTP_SIZE_TA(otp) (((otp) * 2 + 2) * 4)
-#if defined(CONFIG_STM32MP13x) || defined(CONFIG_STM32MP15x)
+#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15x)
/* STM32MP1 with BSEC2 */
#define OTP_SIZE_TA _OTP_SIZE_TA(96)
#else
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 726c390..2d7d973 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -71,7 +71,7 @@ enum forced_boot_mode {
* only address used before device tree parsing
*/
-#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13x)
+#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13X)
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
#define STM32_SYSCFG_BASE 0x50020000
@@ -92,7 +92,7 @@ enum forced_boot_mode {
#define STM32_USART1_BASE 0x5C000000
#define STM32_USART2_BASE 0x4000E000
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define STM32_USART1_BASE 0x4c000000
#define STM32_USART2_BASE 0x4c001000
#endif
@@ -149,7 +149,7 @@ enum forced_boot_mode {
#define TAMP_COPRO_STATE_CRASH 5
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31)
#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30)
#endif
@@ -188,7 +188,7 @@ enum forced_boot_mode {
#define BSEC_OTP_MAC 57
#define BSEC_OTP_BOARD 59
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_MAC 57
diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
index 94c7724..e74342d 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
+++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
@@ -5,7 +5,7 @@
obj-y += cpu.o
-obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
+obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
diff --git a/arch/arm/mach-stm32mp/stm32mp1/fdt.c b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
index de5c5a5..9436b87 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/fdt.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
@@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
int offset, shift;
u32 addr, status, decprot[ETZPC_DECPROT_NB];
- if (IS_ENABLED(CONFIG_STM32MP13x)) {
+ if (IS_ENABLED(CONFIG_STM32MP13X)) {
array = stm32mp13_ip_addr;
array_size = ARRAY_SIZE(stm32mp13_ip_addr);
}
@@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
cpu = get_cpu_type();
get_soc_name(name);
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
stm32mp13_fdt_fixup(blob, soc, cpu, name);
if (IS_ENABLED(CONFIG_STM32MP15x)) {
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index f40d1a7..6d1b76b 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
config CMD_STBOARD
bool "stboard - command for OTP board information"
depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+ default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
help
This compile the stboard command to
read and write the board in the OTP.
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 6ab8f80..7d0d41b 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -12,7 +12,7 @@ config SYS_CONFIG_NAME
source "board/st/common/Kconfig"
endif
-if TARGET_ST_STM32MP13x
+if TARGET_ST_STM32MP13X
config SYS_BOARD
default "stm32mp1"
diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index 2d79bf0..c893e27 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
CONFIG_ENV_OFFSET=0x900000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
-CONFIG_STM32MP13x=y
+CONFIG_STM32MP13X=y
CONFIG_DDR_CACHEABLE_SIZE=0x8000000
CONFIG_CMD_STM32KEY=y
-CONFIG_TARGET_ST_STM32MP13x=y
+CONFIG_TARGET_ST_STM32MP13X=y
CONFIG_ENV_OFFSET_REDUND=0x940000
CONFIG_CMD_STM32PROG=y
# CONFIG_ARMV7_NONSEC is not set
diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
index 7a34ea2..7dbddd0 100644
--- a/drivers/clk/stm32/Kconfig
+++ b/drivers/clk/stm32/Kconfig
@@ -31,7 +31,7 @@ config CLK_STM32MP1
config CLK_STM32MP13
bool "Enable RCC clock driver for STM32MP13"
depends on ARCH_STM32MP && CLK
- default y if STM32MP13x
+ default y if STM32MP13X
select CLK_STM32_CORE
help
Enable the STM32 clock (RCC) driver. Enable support for
generated by cgit v1.1 at 2024-07-18 03:20:22 +0000