diff options
| -rw-r--r-- | drivers/clk/sifive/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/clk/sifive/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clk/sifive/gemgxl-mgmt.c | 60 |
3 files changed, 69 insertions, 0 deletions
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index 81fc9f8..644881b 100644 --- a/drivers/clk/sifive/Kconfig +++ b/drivers/clk/sifive/Kconfig @@ -17,3 +17,10 @@ config CLK_SIFIVE_FU540_PRCI Supports the Power Reset Clock interface (PRCI) IP block found in FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, enable this driver. + +config CLK_SIFIVE_GEMGXL_MGMT + bool "GEMGXL management for SiFive FU540 SoCs" + depends on CLK_SIFIVE + help + Supports the GEMGXL management IP block found in FU540 SoCs to + control GEM TX clock operation mode for 10/100/1000 Mbps. diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index 1155e07..f8263e7 100644 --- a/drivers/clk/sifive/Makefile +++ b/drivers/clk/sifive/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC) += wrpll-cln28hpc.o obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o + +obj-$(CONFIG_CLK_SIFIVE_GEMGXL_MGMT) += gemgxl-mgmt.o diff --git a/drivers/clk/sifive/gemgxl-mgmt.c b/drivers/clk/sifive/gemgxl-mgmt.c new file mode 100644 index 0000000..eb37416 --- /dev/null +++ b/drivers/clk/sifive/gemgxl-mgmt.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Bin Meng <bmeng.cn@gmail.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <asm/io.h> + +struct gemgxl_mgmt_regs { + __u32 tx_clk_sel; +}; + +struct gemgxl_mgmt_platdata { + struct gemgxl_mgmt_regs *regs; +}; + +static int gemgxl_mgmt_ofdata_to_platdata(struct udevice *dev) +{ + struct gemgxl_mgmt_platdata *plat = dev_get_platdata(dev); + + plat->regs = (struct gemgxl_mgmt_regs *)dev_read_addr(dev); + + return 0; +} + +static ulong gemgxl_mgmt_set_rate(struct clk *clk, ulong rate) +{ + struct gemgxl_mgmt_platdata *plat = dev_get_platdata(clk->dev); + + /* + * GEMGXL TX clock operation mode: + * + * 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic + * and output clock on GMII output signal GTX_CLK + * 1 = MII mode. Use MII input signal TX_CLK in TX logic + */ + writel(rate != 125000000, &plat->regs->tx_clk_sel); + + return 0; +} + +const struct clk_ops gemgxl_mgmt_ops = { + .set_rate = gemgxl_mgmt_set_rate, +}; + +static const struct udevice_id gemgxl_mgmt_match[] = { + { .compatible = "sifive,cadencegemgxlmgmt0", }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(sifive_gemgxl_mgmt) = { + .name = "sifive-gemgxl-mgmt", + .id = UCLASS_CLK, + .of_match = gemgxl_mgmt_match, + .ofdata_to_platdata = gemgxl_mgmt_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct gemgxl_mgmt_platdata), + .ops = &gemgxl_mgmt_ops, +}; |