diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc8xx/Kconfig | 4 | ||||
| -rw-r--r-- | board/stx/stxxtc/Kconfig | 15 | ||||
| -rw-r--r-- | board/stx/stxxtc/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/stx/stxxtc/Makefile | 8 | ||||
| -rw-r--r-- | board/stx/stxxtc/README.stxxtc | 59 | ||||
| -rw-r--r-- | board/stx/stxxtc/stxxtc.c | 592 | ||||
| -rw-r--r-- | board/stx/stxxtc/u-boot.lds | 82 | ||||
| -rw-r--r-- | board/stx/stxxtc/u-boot.lds.debug | 121 | ||||
| -rw-r--r-- | configs/stxxtc_defconfig | 3 | ||||
| -rw-r--r-- | doc/README.scrapyard | 1 | ||||
| -rw-r--r-- | include/common.h | 5 | ||||
| -rw-r--r-- | include/configs/stxxtc.h | 485 | ||||
| -rw-r--r-- | include/status_led.h | 4 |
13 files changed, 2 insertions, 1383 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 35608a6..ae97f30 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -74,9 +74,6 @@ config TARGET_ELPT860 config TARGET_UC100 bool "Support uc100" -config TARGET_STXXTC - bool "Support stxxtc" - config TARGET_FPS850L bool "Support FPS850L" @@ -153,7 +150,6 @@ source "board/netvia/Kconfig" source "board/r360mpi/Kconfig" source "board/sixnet/Kconfig" source "board/spd8xx/Kconfig" -source "board/stx/stxxtc/Kconfig" source "board/svm_sc8xx/Kconfig" source "board/tqc/tqm8xx/Kconfig" diff --git a/board/stx/stxxtc/Kconfig b/board/stx/stxxtc/Kconfig deleted file mode 100644 index c444cff..0000000 --- a/board/stx/stxxtc/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_STXXTC - -config SYS_BOARD - string - default "stxxtc" - -config SYS_VENDOR - string - default "stx" - -config SYS_CONFIG_NAME - string - default "stxxtc" - -endif diff --git a/board/stx/stxxtc/MAINTAINERS b/board/stx/stxxtc/MAINTAINERS deleted file mode 100644 index 5ea36b2..0000000 --- a/board/stx/stxxtc/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -STXXTC BOARD -M: Dan Malek <dan@embeddedalley.com> -S: Orphan (since 2014-06) -F: board/stx/stxxtc/ -F: include/configs/stxxtc.h -F: configs/stxxtc_defconfig diff --git a/board/stx/stxxtc/Makefile b/board/stx/stxxtc/Makefile deleted file mode 100644 index 6738d4e..0000000 --- a/board/stx/stxxtc/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = stxxtc.o diff --git a/board/stx/stxxtc/README.stxxtc b/board/stx/stxxtc/README.stxxtc deleted file mode 100644 index 7d9d4d3..0000000 --- a/board/stx/stxxtc/README.stxxtc +++ /dev/null @@ -1,59 +0,0 @@ - - -First, some build notes on the Silicon Turnkey eXpress XTc. - -This board has both 87x/88x procesor options at various -frequencies. The configuration file has some macros for setting -the clock speed, not all have been tested. They all have -a 10MHz input clock. Please do not check in a configuration -file that selects a high speed not available on all processors. -We chose the 66MHz core and bus speed, which should be OK on -all boards. If you have a processor, lucky you! :-) -Just build a new configuration with that speed, check -the macro configuration to ensure it's correct. If the -macro is updated, please check that in, but keep default -processor speed. - -The board is likely to have more than 1Mbyte of NOR boot flash. -It was also configured with a high boot vector (Dan's fault) -so the standard 8xx mapping doesn't work well. We had to move -the addresses around a little bit so one copy would work. The -flash got fragmented, and we are working on a better solution. -There is an "xtc.cfg" floating around for the BDI2000, use -that for programming a new version of U-Boot. You can probably -find it on the Silicon Turnkey eXpress (www.silicontkx.com), -Embedded Alley Solutions (embeddedalley.com), or Denx (denx.de) -servers. - -The board will also have various SDRAM sizes, but the code -should automatically determine the amount of memory. - -There are a couple of different board versions, visually -they use different BGA or surface mount memory parts. However, -they are logically the same board. - -Now, some operational notes. - -The board has the option of sporting two FEC Ethernet ports. -The second port isn't configured to be automatically available -because it would cause U-Boot to generate a board data structure -(the bd_t) with multiple MAC addresses and be incompatible with -standard 8xx kernel builds. You can use/test the second FEC -in U-Boot by assigning an 'eth1addr' and selecting the second -FEC as the port to use. - -Since this is just a development board and not a product, STx -does not assign unique MAC addresses. We just pilfer the -"default" ones used by Wolfgang on some other boards. Please -ensure you assign unique MAC addresses when using these boards. - -The serial port baud rate is 38400, because that's the way -I like it :-) - -Thanks to Pantelis for lots of the work on this board port. - -Have Fun! - - -- Dan - -15 August 2005 diff --git a/board/stx/stxxtc/stxxtc.c b/board/stx/stxxtc/stxxtc.c deleted file mode 100644 index 1996efb..0000000 --- a/board/stx/stxxtc/stxxtc.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2005 - * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * U-Boot port on STx XTc board - * Mostly copied from Netta - */ - -#include <common.h> -#include <miiphy.h> - -#include "mpc8xx.h" - -#ifdef CONFIG_HW_WATCHDOG -#include <watchdog.h> -#endif - -/****************************************************************/ - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -/****************************************************************/ - -/* - * Check Board Identity: - * - * Return 1 always. - */ - -int checkboard(void) -{ - printf ("Silicon Turnkey eXpress XTc\n"); - return (0); -} - -/****************************************************************/ - -#define _NOT_USED_ 0xFFFFFFFF - -/****************************************************************/ - -#define CS_0000 0x00000000 -#define CS_0001 0x10000000 -#define CS_0010 0x20000000 -#define CS_0011 0x30000000 -#define CS_0100 0x40000000 -#define CS_0101 0x50000000 -#define CS_0110 0x60000000 -#define CS_0111 0x70000000 -#define CS_1000 0x80000000 -#define CS_1001 0x90000000 -#define CS_1010 0xA0000000 -#define CS_1011 0xB0000000 -#define CS_1100 0xC0000000 -#define CS_1101 0xD0000000 -#define CS_1110 0xE0000000 -#define CS_1111 0xF0000000 - -#define BS_0000 0x00000000 -#define BS_0001 0x01000000 -#define BS_0010 0x02000000 -#define BS_0011 0x03000000 -#define BS_0100 0x04000000 -#define BS_0101 0x05000000 -#define BS_0110 0x06000000 -#define BS_0111 0x07000000 -#define BS_1000 0x08000000 -#define BS_1001 0x09000000 -#define BS_1010 0x0A000000 -#define BS_1011 0x0B000000 -#define BS_1100 0x0C000000 -#define BS_1101 0x0D000000 -#define BS_1110 0x0E000000 -#define BS_1111 0x0F000000 - -#define GPL0_AAAA 0x00000000 -#define GPL0_AAA0 0x00200000 -#define GPL0_AAA1 0x00300000 -#define GPL0_000A 0x00800000 -#define GPL0_0000 0x00A00000 -#define GPL0_0001 0x00B00000 -#define GPL0_111A 0x00C00000 -#define GPL0_1110 0x00E00000 -#define GPL0_1111 0x00F00000 - -#define GPL1_0000 0x00000000 -#define GPL1_0001 0x00040000 -#define GPL1_1110 0x00080000 -#define GPL1_1111 0x000C0000 - -#define GPL2_0000 0x00000000 -#define GPL2_0001 0x00010000 -#define GPL2_1110 0x00020000 -#define GPL2_1111 0x00030000 - -#define GPL3_0000 0x00000000 -#define GPL3_0001 0x00004000 -#define GPL3_1110 0x00008000 -#define GPL3_1111 0x0000C000 - -#define GPL4_0000 0x00000000 -#define GPL4_0001 0x00001000 -#define GPL4_1110 0x00002000 -#define GPL4_1111 0x00003000 - -#define GPL5_0000 0x00000000 -#define GPL5_0001 0x00000400 -#define GPL5_1110 0x00000800 -#define GPL5_1111 0x00000C00 -#define LOOP 0x00000080 - -#define EXEN 0x00000040 - -#define AMX_COL 0x00000000 -#define AMX_ROW 0x00000020 -#define AMX_MAR 0x00000030 - -#define NA 0x00000008 - -#define UTA 0x00000004 - -#define TODT 0x00000002 - -#define LAST 0x00000001 - -#define A10_AAAA GPL0_AAAA -#define A10_AAA0 GPL0_AAA0 -#define A10_AAA1 GPL0_AAA1 -#define A10_000A GPL0_000A -#define A10_0000 GPL0_0000 -#define A10_0001 GPL0_0001 -#define A10_111A GPL0_111A -#define A10_1110 GPL0_1110 -#define A10_1111 GPL0_1111 - -#define RAS_0000 GPL1_0000 -#define RAS_0001 GPL1_0001 -#define RAS_1110 GPL1_1110 -#define RAS_1111 GPL1_1111 - -#define CAS_0000 GPL2_0000 -#define CAS_0001 GPL2_0001 -#define CAS_1110 GPL2_1110 -#define CAS_1111 GPL2_1111 - -#define WE_0000 GPL3_0000 -#define WE_0001 GPL3_0001 -#define WE_1110 GPL3_1110 -#define WE_1111 GPL3_1111 - -/* #define CAS_LATENCY 3 */ -#define CAS_LATENCY 2 - -const uint sdram_table[0x40] = { - -#if CAS_LATENCY == 3 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, -#endif - -#if CAS_LATENCY == 2 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - -#endif - - /* UPT */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA, - CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST, -}; - -static const uint nandcs_table[0x40] = { - /* RSS */ - CS_1000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1110 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111, - CS_0000 | GPL4_0001 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */ - - /* RBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_1000 | GPL4_1111 | GPL5_1110 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0001 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, - - /* WBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* UPT */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 , - CS_0001 | LAST, -}; - -/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ -/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */ -#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU) - -/* 9 */ -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -void check_ram(unsigned int addr, unsigned int size) -{ - unsigned int i, j, v, vv; - volatile unsigned int *p; - unsigned int pv; - - p = (unsigned int *)addr; - pv = (unsigned int)p; - for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int)) - *p++ = pv; - - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - v = (unsigned int)p; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - p++; - } - - for (j = 0; j < 5; j++) { - switch (j) { - case 0: v = 0x00000000; break; - case 1: v = 0xffffffff; break; - case 2: v = 0x55555555; break; - case 3: v = 0xaaaaaaaa; break; - default:v = 0xdeadbeef; break; - } - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - *p = v; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - *p = ~v; - p++; - } - } -} - -#define DO_LOOP do { for (;;) asm volatile ("nop" : : : "memory"); } while(0) - -phys_size_t initdram(int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - u32 d1, d2; - - upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0])); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = MPTPR_PTP_DIV8; - - memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; - memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */ - - udelay(200); - - /* perform SDRAM initialisation sequence */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/ - udelay(1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay(10000); - - - d1 = 0xAA55AA55; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - DO_LOOP; - } - - d1 = 0x55AA55AA; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - DO_LOOP; - } - - d1 = 0x12345678; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - DO_LOOP; - } - - size = get_ram_size((long *)0, SDRAM_MAX_SIZE); - - return size; -} - -/* ------------------------------------------------------------------------- */ - -void reset_phys(void) -{ - int phyno; - unsigned short v; - - udelay(10000); - /* reset the damn phys */ - mii_init(); - - for (phyno = 0; phyno < 32; ++phyno) { - miiphy_read("FEC", phyno, MII_PHYSID1, &v); - if (v == 0xFFFF) - continue; - miiphy_write("FEC", phyno, MII_BMCR, BMCR_PDOWN); - udelay(10000); - miiphy_write("FEC", phyno, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); - udelay(10000); - } -} - -/* ------------------------------------------------------------------------- */ - -/* GP = general purpose, SP = special purpose (on chip peripheral) */ - -/* bits that can have a special purpose or can be configured as inputs/outputs */ -#define PA_GP_INMASK _BW(6) -#define PA_GP_OUTMASK (_BW(7)) -#define PA_SP_MASK 0 -#define PA_ODR_VAL 0 -#define PA_GP_OUTVAL (_BW(7)) -#define PA_SP_DIRVAL 0 - -#define PB_GP_INMASK 0 -#define PB_GP_OUTMASK (_B(23)) -#define PB_SP_MASK 0 -#define PB_ODR_VAL 0 -#define PB_GP_OUTVAL (_B(23)) -#define PB_SP_DIRVAL 0 - -#define PC_GP_INMASK 0 -#define PC_GP_OUTMASK (_BW(15)) - -#define PC_SP_MASK 0 -#define PC_SOVAL 0 -#define PC_INTVAL 0 -#define PC_GP_OUTVAL 0 -#define PC_SP_DIRVAL 0 - -#define PE_GP_INMASK 0 -#define PE_GP_OUTMASK 0 -#define PE_GP_OUTVAL 0 - -#define PE_SP_MASK 0 -#define PE_ODR_VAL 0 -#define PE_SP_DIRVAL 0 - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *ioport = &immap->im_ioport; - volatile cpm8xx_t *cpm = &immap->im_cpm; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - (void)ioport; - (void)cpm; -#if 1 - /* NAND chip select */ - upmconfig(UPMB, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0])); - memctl->memc_or2 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS); - memctl->memc_br2 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMB); - memctl->memc_mbmr = 0; /* all clear */ -#endif - - memctl->memc_br5 &= ~BR_V; - memctl->memc_br6 &= ~BR_V; - memctl->memc_br7 &= ~BR_V; - -#if 1 - ioport->iop_padat = PA_GP_OUTVAL; - ioport->iop_paodr = PA_ODR_VAL; - ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; - ioport->iop_papar = PA_SP_MASK; - - cpm->cp_pbdat = PB_GP_OUTVAL; - cpm->cp_pbodr = PB_ODR_VAL; - cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; - cpm->cp_pbpar = PB_SP_MASK; - - ioport->iop_pcdat = PC_GP_OUTVAL; - ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; - ioport->iop_pcso = PC_SOVAL; - ioport->iop_pcint = PC_INTVAL; - ioport->iop_pcpar = PC_SP_MASK; - - cpm->cp_pedat = PE_GP_OUTVAL; - cpm->cp_peodr = PE_ODR_VAL; - cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL; - cpm->cp_pepar = PE_SP_MASK; -#endif - - return 0; -} - -#ifdef CONFIG_HW_WATCHDOG - -void hw_watchdog_reset(void) -{ - /* XXX add here the really funky stuff */ -} - -#endif - -#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE) -int overwrite_console(void) -{ - /* printf("overwrite_console called\n"); */ - return 0; -} -#endif - -extern int drv_phone_init(void); -extern int drv_phone_use_me(void); -extern int drv_phone_is_idle(void); - -int misc_init_r(void) -{ - return 0; -} - -int last_stage_init(void) -{ - reset_phys(); - - return 0; -} diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/stx/stxxtc/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug deleted file mode 100644 index a198cf9..0000000 --- a/board/stx/stxxtc/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/stxxtc_defconfig b/configs/stxxtc_defconfig deleted file mode 100644 index d0642e4..0000000 --- a/configs/stxxtc_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_STXXTC=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 6f28ab0..b7b16d1 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +stxxtc powerpc mpc8xx - - Dan Malek <dan@embeddedalley.com> omap5912osk arm arm926ejs - - Rishi Bhattacharya <rishi@ti.com> p1023rds powerpc mpc85xx d0bc5140 2014-07-22 Roy Zang <tie-fei.zang@freescale.com> spc1920 powerpc mpc8xx 98ad54be 2014-07-07 diff --git a/include/common.h b/include/common.h index 1d6cb48..c7e51ca 100644 --- a/include/common.h +++ b/include/common.h @@ -32,10 +32,7 @@ typedef volatile unsigned char vu_char; defined(CONFIG_MPC866) || \ defined(CONFIG_MPC866P) # define CONFIG_MPC866_FAMILY 1 -#elif defined(CONFIG_MPC870) \ - || defined(CONFIG_MPC875) \ - || defined(CONFIG_MPC880) \ - || defined(CONFIG_MPC885) +#elif defined(CONFIG_MPC885) # define CONFIG_MPC885_FAMILY 1 #endif #if defined(CONFIG_MPC860) \ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h deleted file mode 100644 index 4e3b727..0000000 --- a/include/configs/stxxtc.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com - * U-Boot port on STx XTc 8xx board - * Mostly copied from Panto's NETTA2 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC875 1 /* This is a MPC875 CPU */ -#define CONFIG_STXXTC 1 /* ...on a STx XTc board */ - -#define CONFIG_SYS_TEXT_BASE 0x40F00000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115.2kbps */ - -#define CONFIG_XIN 10000000 /* 10 MHz input xtal */ - -/* Select one of few clock rates defined later in this file. -*/ -/* #define MPC8XX_HZ 50000000 */ -#define MPC8XX_HZ 66666666 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_SOURCE -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#undef CONFIG_RMII - -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 1 /* phy address of FEC */ -#undef CONFIG_FEC1_PHY_NORXERR - -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 3 -#undef CONFIG_FEC2_PHY_NORXERR - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "xtc> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif - -/* yes this is weird, I know :) */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE | 0x00F00000) -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00000000) -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x00010000) -#define CONFIG_ENV_OFFSET_REDUND 0 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x2000000 } - -#define CONFIG_SYS_FLASH_PROTECTION - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 66666666 -#define CONFIG_SYS_PLPRCR ((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif -#else -#error unsupported freq for XIN (must be 10MHz) -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x42000000 /* FLASH bank #1 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ - -#define FLASH_BANK_MAX_SIZE 0x01000000 /* max size per chip */ - -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 -#define CONFIG_SYS_PRELIM_OR_AM (0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) - -#define CONFIG_SYS_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) - -/* - * BR4 and OR4 (SDRAM) - * - */ -#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR4_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#define CONFIG_SYS_MAMR_PTA 234 - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/****************************************************************/ - -#define NAND_SIZE 0x00010000 /* 64K */ -#define NAND_BASE 0xF1000000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*****************************************************************************/ - -/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB, - * CxOE and CxRESET. We use the CxOE. - */ -#define STATUS_LED_BIT 0x00000080 /* bit 24 */ - -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#ifndef __ASSEMBLY__ - -/* LEDs */ - -/* led_id_t is unsigned int mask */ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \ - else \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \ - } while(0) - -#define __led_init(msk, st) __led_set(msk, st) - -#endif - -/******************************************************************************/ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 - -/******************************************************************************/ - -/* use board specific hardware */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG - -/*****************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_CRC32_VERIFY 1 -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*****************************************************************************/ - -/* pass open firmware flattened device tree */ -#define CONFIG_OF_LIBFDT 1 - -#define OF_TBCLK (MPC8XX_HZ / 16) - -#endif /* __CONFIG_H */ diff --git a/include/status_led.h b/include/status_led.h index b8aaaf7..a41d3bc 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -231,10 +231,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** STx XTc ********************************************************/ -#elif defined(CONFIG_STXXTC) -/* XXX empty just to avoid the error */ -/************************************************************************/ #elif defined(CONFIG_V38B) # define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ |