diff options
| author | Tony Dinh <mibodhi@gmail.com> | 2023-02-09 14:00:03 -0800 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2023-02-13 10:14:50 +0100 |
| commit | b21f87a5a5e23a833c13f26819a04d80e0802600 (patch) | |
| tree | b83274f29822c2275f8aa0223b026baf061073e7 /include | |
| parent | 384e2d396c378063749849739e6b528be59c4071 (diff) | |
| download | u-boot-b21f87a5a5e23a833c13f26819a04d80e0802600.zip u-boot-b21f87a5a5e23a833c13f26819a04d80e0802600.tar.gz u-boot-b21f87a5a5e23a833c13f26819a04d80e0802600.tar.bz2 | |
arm: mvebu: Add support for Synology DS116 (Armada 385)
Synology DS116 is a NAS based on Marvell Armada 385 SoC.
Board Specification:
- Marvel MV88F6820 Dual Core at 1.8GHz
- 1 GiB DDR3 RAM
- 8MB Macronix mx25l6405d SPI flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 1x SATA (6 Gbps)
- 3x LED
- PIC16F1829 (connected to uart1)
- GPIO fan
- serial console
Note that this patch depends on the add-support for Thecus N2350 patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/ds116.h | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/include/configs/ds116.h b/include/configs/ds116.h new file mode 100644 index 0000000..031f4f6 --- /dev/null +++ b/include/configs/ds116.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2023 Tony Dinh <mibodhi@gmail.com> + * + */ + +#ifndef _CONFIG_DS116_H +#define _CONFIG_DS116_H + +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define RELOCATION_LIMITS_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Include the common distro boot environment */ +#ifndef CONFIG_SPL_BUILD + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(SCSI, scsi, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define KERNEL_ADDR_R __stringify(0x1000000) +#define FDT_ADDR_R __stringify(0x2000000) +#define RAMDISK_ADDR_R __stringify(0x2200000) +#define SCRIPT_ADDR_R __stringify(0x1800000) +#define PXEFILE_ADDR_R __stringify(0x1900000) + +#define LOAD_ADDRESS_ENV_SETTINGS \ + "kernel_addr_r=" KERNEL_ADDR_R "\0" \ + "fdt_addr_r=" FDT_ADDR_R "\0" \ + "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ + "scriptaddr=" SCRIPT_ADDR_R "\0" \ + "pxefile_addr_r=" PXEFILE_ADDR_R "\0" + +#include <config_distro_bootcmd.h> + +#define CFG_EXTRA_ENV_SETTINGS \ + RELOCATION_LIMITS_ENV_SETTINGS \ + LOAD_ADDRESS_ENV_SETTINGS \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "console=ttyS0,115200\0" \ + BOOTENV + +#endif /* CONFIG_SPL_BUILD */ + +#endif /* _CONFIG_DS116_H */ |