- CFG_RX_ETH_BUFFER added.

15 files changed, 45 insertions, 35 deletions

diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 5468fe2..3a630d8 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -125,6 +125,10 @@
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
+#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index ed843d4..66f978e 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -144,7 +144,7 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550		
+#define CFG_NS16550
 #define CFG_NS16550_SERIAL
 
 #define CFG_NS16550_REG_SIZE	1
@@ -171,7 +171,7 @@
  * Memory configuration using SPD information stored on the SODIMMs
  * not yet supported.
  */
- 
+
 #define	CFG_SDRAM_SIZE    64		/* SDRAM size -- 64 or 128 MB supported */
 
 	/* Bit-field values for MCCR1.
@@ -186,7 +186,7 @@
 #else
 #  error "SDRAM size not supported"
 #endif
-#define CFG_BANK1_ROW	0	
+#define CFG_BANK1_ROW	0
 #define CFG_BANK2_ROW	0
 #define CFG_BANK3_ROW	0
 #define CFG_BANK4_ROW	0
@@ -361,7 +361,7 @@
 /* IRQ_ENA_2 bit definitions */
 #define	I_ENA_2_IEAB	0x80		/* ABORT IRQ enable		*/
 #define	I_ENA_2_IEK1	0x40		/* KEY1 IRQ enable		*/
-#define	I_ENA_2_IEK2	0x20		/* KEY2 IRQ enable		*/ 
+#define	I_ENA_2_IEK2	0x20		/* KEY2 IRQ enable		*/
 #define	I_ENA_2_IERT	0x10		/* RTC IRQ enable		*/
 #define	I_ENA_2_IESM	0x08		/* LM81 IRQ enable		*/
 #define	I_ENA_2_IEDG	0x04		/* DEGENERATING IRQ enable	*/
@@ -371,9 +371,9 @@
 /* IRQ_STAT_2 bit definitions */
 #define	I_STAT_2_ABO	0x80		/* ABORT IRQ status		*/
 #define	I_STAT_2_KY1	0x40		/* KEY1 IRQ status		*/
-#define	I_STAT_2_KY2	0x20		/* KEY2 IRQ status		*/ 
+#define	I_STAT_2_KY2	0x20		/* KEY2 IRQ status		*/
 #define	I_STAT_2_RTC	0x10		/* RTC IRQ status		*/
-#define	I_STAT_2_SMN	0x08		/* LM81 IRQ status		*/ 
+#define	I_STAT_2_SMN	0x08		/* LM81 IRQ status		*/
 #define	I_STAT_2_DEG	0x04		/* DEGENERATING IRQ status	*/
 #define	I_STAT_2_SIO2	0x02		/* ST16552/B IRQ status		*/
 #define	I_STAT_2_SIO1	0x01		/* ST16552/A IRQ status		*/
@@ -421,14 +421,14 @@
 #define	DISP_UDC_ADR	*((volatile uchar*)(DISPLAY_BASE + 0x00))	/* UDC Address Reg.    */
 #define	DISP_CWORD	*((volatile uchar*)(DISPLAY_BASE + 0x10))	/* Control Word Reg.   */
 
-#define	DISP_DIG0	*((volatile uchar*)(DISP_CHR_RAM + 0x00))	/* Digit 0 address     */      
-#define	DISP_DIG1	*((volatile uchar*)(DISP_CHR_RAM + 0x01))	/* Digit 0 address     */      
+#define	DISP_DIG0	*((volatile uchar*)(DISP_CHR_RAM + 0x00))	/* Digit 0 address     */
+#define	DISP_DIG1	*((volatile uchar*)(DISP_CHR_RAM + 0x01))	/* Digit 0 address     */
 #define	DISP_DIG2	*((volatile uchar*)(DISP_CHR_RAM + 0x02))	/* Digit 0 address     */
-#define	DISP_DIG3	*((volatile uchar*)(DISP_CHR_RAM + 0x03))	/* Digit 0 address     */      
-#define	DISP_DIG4	*((volatile uchar*)(DISP_CHR_RAM + 0x04))	/* Digit 0 address     */      
+#define	DISP_DIG3	*((volatile uchar*)(DISP_CHR_RAM + 0x03))	/* Digit 0 address     */
+#define	DISP_DIG4	*((volatile uchar*)(DISP_CHR_RAM + 0x04))	/* Digit 0 address     */
 #define	DISP_DIG5	*((volatile uchar*)(DISP_CHR_RAM + 0x05))	/* Digit 0 address     */
-#define	DISP_DIG6	*((volatile uchar*)(DISP_CHR_RAM + 0x06))	/* Digit 0 address     */      
-#define	DISP_DIG7	*((volatile uchar*)(DISP_CHR_RAM + 0x07))	/* Digit 0 address     */      
+#define	DISP_DIG6	*((volatile uchar*)(DISP_CHR_RAM + 0x06))	/* Digit 0 address     */
+#define	DISP_DIG7	*((volatile uchar*)(DISP_CHR_RAM + 0x07))	/* Digit 0 address     */
 
 
 /*-----------------------------------------------------------------------
@@ -441,6 +441,7 @@
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support 	*/
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 #define PCI_ENET0_IOADDR	0x00104000
 #define PCI_ENET0_MEMADDR	0x82000000
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 9b1dc8a..a4cfe25 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -146,6 +146,8 @@
 
 #define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
 
+#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index a265fcd..5e07d3e 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -55,15 +55,7 @@
 #endif
 
 #undef	CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND							\
-	"setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) "	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;"	\
-	"bootm ffc00000 ffca0000"
-#define CONFIG_NFSBOOTCOMMAND							\
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;"	\
-	"bootm ffc00000"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND	"bootm 100000"	/* default boot command	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -73,12 +65,7 @@
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 
-#if 0 /* test-only */
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT |  \
-				 CONFIG_BOOTP_VENDOREX)
-#else
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT)
-#endif
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_DHCP	| \
@@ -147,6 +134,8 @@
 
 #define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
 
+#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -202,7 +191,7 @@
 #define CFG_FLASH_BASE		0xFFFC0000
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
@@ -360,7 +349,7 @@
 #define CFG_FPGA_STATUS_TS_IRQ  0x1000
 
 #define CFG_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE       64*1024     /* 64kByte is enough for XC2S15  */
+#define CFG_FPGA_MAX_SIZE       128*1024    /* 128kByte is enough for XC2S30 */
 
 /* FPGA program pin configuration */
 #define CFG_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 40ba25a..ccbed31 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -304,6 +304,7 @@
 #define CFG_ETH_IOBASE	     0x00104000
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define PCI_ENET0_IOADDR	0x00104000
 #define PCI_ENET0_MEMADDR	0x80000000
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index a9e87c5..54cdd23 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -333,6 +333,7 @@
 
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #endif    /* __CONFIG_H */
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 7a60e4b..57f577d2 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -94,6 +94,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100				/* Ethernet Express PRO 100	*/
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 #define PCI_ENET0_IOADDR	0x80000000
 #define PCI_ENET0_MEMADDR	0x80000000
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index b48d0d7..3eb6ac3 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -261,6 +261,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_TULIP
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index bf858ec..f4dfbfe 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -263,6 +263,7 @@
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_TULIP
 
 
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 018865e..6ba14af 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -316,6 +316,7 @@
 #ifdef	CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #endif
 
 /*
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 6965ebe..3ec84ff 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -128,6 +128,10 @@
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
+#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 0bef321..799d5d6 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -82,6 +82,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 #define PCI_ENET0_IOADDR	0x80000000
 #define PCI_ENET0_MEMADDR	0x80000000
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index aa45675..307c2e2 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -81,6 +81,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_NATSEMI
 #define CONFIG_NS8382X
 
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 4d5a568..2b5a54d 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -36,7 +36,7 @@
 #define CONFIG_X86		1	/* This is a X86 CPU		*/
 #define CONFIG_SC520		1	/* Include support for AMD SC520 */
 
-#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */	
+#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */
 #define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
 #define CFG_SDRAM_RAS_CAS_DELAY   3     /* 3T */
 
@@ -71,7 +71,7 @@
 
 #define CONFIG_BOOTDELAY	15
 #define CONFIG_BOOTARGS    	"root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
-#define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" 
+#define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
@@ -123,7 +123,7 @@
 #define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
 #define CONFIG_MW_EEPROM        /* MicroWire EEPROMS such as AT93LC46 */
 #define CONFIG_DS1722           /* Dallas DS1722 SPI Temperature probe */
-				 
+
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -131,7 +131,7 @@
 
 #if 0
 /* Environment in flash */
-#define CFG_ENV_IS_IN_FLASH     1 
+#define CFG_ENV_IS_IN_FLASH     1
 # define CFG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
 # define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
 # define CFG_ENV_OFFSET         0
@@ -143,7 +143,7 @@
 # define CONFIG_SPI
 # define CONFIG_SPI_X 1
 # define CFG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
-# define CFG_ENV_OFFSET         0x1c00      
+# define CFG_ENV_OFFSET         0x1c00
 
 #endif
 
@@ -155,6 +155,7 @@
  */
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 /************************************************************
  * IDE/ATA stuff
@@ -204,8 +205,8 @@
 #define CONFIG_PCI_SCAN_SHOW
 
 #define	CFG_FIRST_PCI_IRQ   9
-#define	CFG_SECOND_PCI_IRQ  10 
-#define CFG_THIRD_PCI_IRQ   11 
+#define	CFG_SECOND_PCI_IRQ  10
+#define CFG_THIRD_PCI_IRQ   11
 #define	CFG_FORTH_PCI_IRQ   12
 
 
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 80cfe8a..4c4c279 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -125,6 +125,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #define PCI_ENET0_IOADDR	0xF0000000