ipam390: remove board

This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 237 deletions

diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
deleted file mode 100644
index e4e8e2a..0000000
--- a/include/configs/ipam390.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- * Based on:
- * U-Boot:include/configs/da850evm.h
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-
-/*
- * SoC Configuration
- */
-#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ		24000000
-#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE	(128 << 20) /* SDRAM size 128MB */
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END	(CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (	\
-	DAVINCI_SYSCFG_SUSPSRC_TIMER0 |		\
-	DAVINCI_SYSCFG_SUSPSRC_UART2 |		\
-	DAVINCI_SYSCFG_SUSPSRC_UART0 |		\
-	DAVINCI_SYSCFG_SUSPSRC_EMAC)
-
-/*
- * PLL configuration
- */
-
-#define CONFIG_SYS_DA850_PLL0_PLLM     24
-#define CONFIG_SYS_DA850_PLL1_PLLM     24
-
-/*
- * DDR2 memory configuration
- */
-#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
-					DV_DDR_PHY_EXT_STRBEN | \
-					(0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-#define CONFIG_SYS_DA850_DDR2_SDRCR	0x00000498
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR2	0x00000004
-#define CONFIG_SYS_DA850_DDR2_PBBPR	0x00000020
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR (		\
-	(13 << DV_DDR_SDTMR1_RFC_SHIFT) |	\
-	(2 << DV_DDR_SDTMR1_RP_SHIFT) |		\
-	(2 << DV_DDR_SDTMR1_RCD_SHIFT) |	\
-	(2 << DV_DDR_SDTMR1_WR_SHIFT) |		\
-	(5 << DV_DDR_SDTMR1_RAS_SHIFT) |	\
-	(8 << DV_DDR_SDTMR1_RC_SHIFT) |		\
-	(1 << DV_DDR_SDTMR1_RRD_SHIFT) |	\
-	(1 << DV_DDR_SDTMR1_WTR_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		\
-	(8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |	\
-	(2 << DV_DDR_SDTMR2_XP_SHIFT) |		\
-	(0 << DV_DDR_SDTMR2_ODT_SHIFT) |	\
-	(14 << DV_DDR_SDTMR2_XSNR_SHIFT) |	\
-	(0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |	\
-	(1 << DV_DDR_SDTMR2_RTP_SHIFT) |	\
-	(2 << DV_DDR_SDTMR2_CKE_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR (		\
-	(1 << DV_DDR_SDCR_DDR2EN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |	\
-	(1 << DV_DDR_SDCR_DDREN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |	\
-	(2 << DV_DDR_SDCR_CL_SHIFT) |	\
-	(3 << DV_DDR_SDCR_IBANK_SHIFT) |	\
-	(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
-
-#define CONFIG_SYS_DA850_CS3CFG	(DAVINCI_ABCR_WSETUP(1)	| \
-				DAVINCI_ABCR_WSTROBE(2)	| \
-				DAVINCI_ABCR_WHOLD(0)	| \
-				DAVINCI_ABCR_RSETUP(1)	| \
-				DAVINCI_ABCR_RSTROBE(2)	| \
-				DAVINCI_ABCR_RHOLD(1)	| \
-				DAVINCI_ABCR_TA(0)	| \
-				DAVINCI_ABCR_ASIZE_8BIT)
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
-
-/*
- * Flash & Environment
- */
-#define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
-#define CONFIG_ENV_SIZE			(128 << 10)
-#define	CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define	CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_CS		3
-#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_NAND_MASK_CLE		0x10
-#define CONFIG_SYS_NAND_MASK_ALE		0x8
-#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x120000
-#define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_DST - \
-					CONFIG_SYS_NAND_U_BOOT_SIZE - \
-					CONFIG_SYS_MALLOC_LEN -       \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_NAND_ECCPOS		{				\
-			6,   7,  8,  9, 10,	11, 12, 13, 14, 15,	\
-			22, 23, 24, 25, 26,	27, 28, 29, 30, 31,	\
-			38, 39, 40, 41, 42,	43, 44, 45, 46, 47,	\
-			54, 55, 56, 57, 58,	59, 60, 61, 62, 63}
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	10
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_LOAD
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-#endif
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_HWCONFIG		/* enable hwconfig */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
-		"root=/dev/mtdblock5 rw noinitrd " \
-		"rootfstype=jffs2 noinitrd\0" \
-	"hwconfig=dsp:wake=yes\0" \
-	"bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
-	"bootfile=uImage\0" \
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"	\
-	"mtddevname=uboot-env\0" \
-	"mtddevnum=0\0" \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"			\
-	"u-boot=/tftpboot/ipam390/u-boot.ais\0"			\
-	"upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
-		"nand write c0000000 20000 ${filesize}\0"	\
-	"setbootparms=nand read c0100000 200000 400000;"	\
-		"run defbootargs addmtd;"			\
-		"spl export atags c0100000;"			\
-		"nand erase.part bootparms;"			\
-		"nand write c0000100 180000 20000\0"		\
-	"\0"
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-/* defines for SPL */
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
-						CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_STACK	0x8001ff00
-#define CONFIG_SPL_MAX_SIZE	0x20000
-#define CONFIG_SPL_MAX_FOOTPRINT	32768
-
-/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0xc0000000
-
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-
-/* add FALCON boot mode */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000
-#define CONFIG_SYS_SPL_ARGS_ADDR	LINUX_BOOT_PARAM_ADDR
-
-/* GPIO support */
-#define CONFIG_IPAM390_GPIO_BOOTMODE	((16 * 7) + 14)
-
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_IPAM390_GPIO_LED_RED	((16 * 7) + 11)
-#define CONFIG_IPAM390_GPIO_LED_GREEN	((16 * 7) + 12)
-
-#include <asm/arch/hardware.h>
-
-#endif /* __CONFIG_H */