Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqWIP/11Nov2021

- device-tree sync-up with Linux for ls1028a
- fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc,
  spintable code, configs, qspi node, pci
- enable EFI_SET_TIME support in sl28
- powerpc: Drop -mstring

23 files changed, 56 insertions, 270 deletions

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 198b698..bf8a92c 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2012 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -361,35 +361,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 825KB (1650 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(8 * (128 * 1024))
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 #ifdef CONFIG_PCI
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index ef79c1b..89bbeb7 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -500,36 +500,6 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_SYS_DPAA_FMAN
 
-/* Default address of microcode for the Linux FMan driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#define CONFIG_SYS_QE_FW_ADDR	0x130000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x920)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#define CONFIG_SYS_QE_FW_ADDR		0xEFE00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 4485f40..48fc8a2 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __CONFIG_H
@@ -501,33 +501,6 @@
 
 #define CONFIG_U_QE
 
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR		0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x920)
-#else
-#define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index e70d108..78562bc 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -482,33 +482,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 #define CONFIG_SYS_INTERLAKEN
 
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index fbe8852..471ed94 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -434,35 +434,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 #define CONFIG_SYS_INTERLAKEN
 
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x110000
-
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
-
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 87e3e67..f6ccaf4 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -456,24 +456,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_DPAA_RMAN
 #define CONFIG_SYS_INTERLAKEN
 
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 8819935..1e55d52 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2009-2012 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -365,35 +365,6 @@
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 825KB (1650 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(8 * (128 * 1024))
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 #ifdef CONFIG_PCI
diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h
index ff97c6c..869bd9b 100644
--- a/include/configs/km/km-mpc8309.h
+++ b/include/configs/km/km-mpc8309.h
@@ -13,9 +13,6 @@
 
 /* QE microcode/firmware address */
 /* between the u-boot partition and env */
-#ifndef CONFIG_SYS_QE_FW_ADDR
-#define CONFIG_SYS_QE_FW_ADDR   0xF00C0000
-#endif
 
 /*
  * System IO Config
diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index a5bc689..743d09e 100644
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -212,7 +212,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_MONITOR_LEN		0x100000     /* 1Mbyte */
-#define CONFIG_SYS_QE_FW_ADDR		0x60020000
 
 #define CONFIG_SYS_BOOTCOUNT_BE
 
diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index 91b50cb..8274dd3 100644
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -411,10 +411,6 @@ int get_scl(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-/* Default address of microcode for the Linux Fman driver */
-#define CONFIG_SYS_FMAN_FW_ADDR		0xE8020000
-#define CONFIG_SYS_QE_FW_ADDR		0xE8040000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 /* Qman / Bman */
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 6769592..4152851 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -88,6 +88,8 @@
 	"envload=env import -d -b ${env_addr}\0" \
 	"install_rcw=source 20200000\0" \
 	"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+	"dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+			    "u-boot-env raw 0x3e0000 0x20000\0" \
 	ENV_MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index d072eaa..4e654ca 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -29,10 +29,6 @@
 /* CSU */
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
-/* PFE */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x300000
-
 /*SPI device */
 #define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index f73dafe..222caa1 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -174,8 +174,6 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 #endif
 
-#define CONFIG_SYS_QE_FW_ADDR	0x67f40000
-
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 748c04b..27b97ff 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -390,9 +390,6 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
-
-#define CONFIG_SYS_QE_FW_ADDR     0x60940000
-
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 067d4f7..c099629 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -408,8 +408,6 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-#define CONFIG_SYS_QE_FW_ADDR     0x60940000
-
 /*
  * Environment
  */
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 6e8eebf..bdf1b43 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -168,29 +168,6 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
 
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_FMAN_FW_ADDR		0x900000
-#define CONFIG_SYS_QE_FW_ADDR		0x940000
-
-
-#else
-#if defined(CONFIG_SD_BOOT)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2040 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4A00)
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
-#else
-/* FMan fireware Pre-load address */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
-#define CONFIG_SYS_QE_FW_ADDR		0x60940000
-#endif
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
 #endif
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 7822e9d..515f420 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -145,26 +145,6 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
 #endif
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_FMAN_FW_ADDR		0x900000
-#else
-#ifdef CONFIG_SD_BOOT
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
-#elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		(36 * (256 * 1024))
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
-#endif
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
 
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 987df5f..8bc09d0 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -27,13 +27,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-/* DSPI */
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_STMICRO	/* cs0 */
-#define CONFIG_SPI_FLASH_SST		/* cs1 */
-#define CONFIG_SPI_FLASH_EON		/* cs2 */
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define RGMII_PHY1_ADDR		0x1
 #define RGMII_PHY2_ADDR		0x2
diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
index 7fa3c25..f1b4e1c 100644
--- a/include/configs/lx2162aqds.h
+++ b/include/configs/lx2162aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __LX2162_QDS_H
@@ -60,7 +60,7 @@ u8 qixis_esdhc_detect_quirk(void);
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"			\
-	"emmc_bootcmd=echo Trying load from emmc card..;"	\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
 		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
 		"$kernel_addr_sd $kernel_size_sd ;"		\
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index d3ac057..6b4fc39 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -528,12 +528,6 @@
 #define CONFIG_HAS_ETH2
 #endif /* CONFIG_TSEC_ENET */
 
-#ifdef CONFIG_QE
-/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FW_ADDR	0xefec0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
-#endif /* CONFIG_QE */
-
 /*
  * Environment
  */
diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
index 6a714d0..0f680e5 100644
--- a/include/dm/ofnode.h
+++ b/include/dm/ofnode.h
@@ -1010,6 +1010,30 @@ ofnode ofnode_by_prop_value(ofnode from, const char *propname,
 	     node = ofnode_next_subnode(node))
 
 /**
+ * ofnode_for_each_compatible_node() - iterate over all nodes with a given
+ *				       compatible string
+ *
+ * @node:       child node (ofnode, lvalue)
+ * @compat:     compatible string to match
+ *
+ * This is a wrapper around a for loop and is used like so:
+ *
+ *	ofnode node;
+ *
+ *	ofnode_for_each_compatible_node(node, parent, compatible) {
+ *		Use node
+ *		...
+ *	}
+ *
+ * Note that this is implemented as a macro and @node is used as
+ * iterator in the loop.
+ */
+#define ofnode_for_each_compatible_node(node, compat) \
+	for (node = ofnode_by_compatible(ofnode_null(), compat); \
+	     ofnode_valid(node); \
+	     node = ofnode_by_compatible(node, compat))
+
+/**
  * ofnode_get_child_count() - get the child count of a ofnode
  *
  * @node: valid node to get its child count
diff --git a/include/dt-bindings/clock/fsl,qoriq-clockgen.h b/include/dt-bindings/clock/fsl,qoriq-clockgen.h
new file mode 100644
index 0000000..ddec7d0
--- /dev/null
+++ b/include/dt-bindings/clock/fsl,qoriq-clockgen.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef DT_CLOCK_FSL_QORIQ_CLOCKGEN_H
+#define DT_CLOCK_FSL_QORIQ_CLOCKGEN_H
+
+#define QORIQ_CLK_SYSCLK	0
+#define QORIQ_CLK_CMUX		1
+#define QORIQ_CLK_HWACCEL	2
+#define QORIQ_CLK_FMAN		3
+#define QORIQ_CLK_PLATFORM_PLL	4
+#define QORIQ_CLK_CORECLK	5
+
+#define QORIQ_CLK_PLL_DIV(x)	((x) - 1)
+
+#endif /* DT_CLOCK_FSL_QORIQ_CLOCKGEN_H */
diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h
index a8b072a..07a46a4 100644
--- a/include/fsl-mc/fsl_mc.h
+++ b/include/fsl-mc/fsl_mc.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Freescale Semiconductor
+ * Copyright 2021 NXP
  */
 
 #ifndef __FSL_MC_H__
@@ -52,6 +53,14 @@ struct mc_ccsr_registers {
 	u32 reg_error[];
 };
 
+struct log_header {
+	u32 magic_word;
+	char reserved[4];
+	u32 buf_start;
+	u32 buf_length;
+	u32 last_byte;
+};
+
 void fdt_fsl_mc_fixup_iommu_map_entry(void *blob);
 int get_mc_boot_status(void);
 int get_dpl_apply_status(void);