tpm: disociate TPMv1.x specific and generic code

There are no changes in this commit but a new organization of the code
as follow.

* cmd/ directory:
        > move existing code from cmd/tpm.c in cmd/tpm-common.c
	> move specific code in cmd/tpm-v1.c
	> create a specific header file with generic definitions for
	  commands only called cmd/tpm-user-utils.h

* lib/ directory:
        > move existing code from lib/tpm.c in lib/tpm-common.c
	> move specific code in lib/tpm-v1.c
	> create a specific header file with generic definitions for
	  the library itself called lib/tpm-utils.h

* include/ directory:
        > move existing code from include/tpm.h in include/tpm-common.h
	> move specific code in include/tpm-v1.h

Code designated as 'common' is compiled if TPM are used. Code designated
as 'specific' is compiled only if the right specification has been
selected.

All files include tpm-common.h.
Files in cmd/ include tpm-user-utils.h.
Files in lib/ include tpm-utils.h.
Depending on the specification, files may include either (not both)
tpm-v1.h or tpm-v2.h.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix a few more cases of tpm.h -> tpm-v1.h, some Kconfig logic]
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 210 insertions, 0 deletions

diff --git a/include/tpm-common.h b/include/tpm-common.h
new file mode 100644
index 0000000..1ca5d28
--- /dev/null
+++ b/include/tpm-common.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
+ */
+
+#ifndef __TPM_COMMON_H
+#define __TPM_COMMON_H
+
+enum tpm_duration {
+	TPM_SHORT = 0,
+	TPM_MEDIUM = 1,
+	TPM_LONG = 2,
+	TPM_UNDEFINED,
+
+	TPM_DURATION_COUNT,
+};
+
+/*
+ * Here is a partial implementation of TPM commands.  Please consult TCG Main
+ * Specification for definitions of TPM commands.
+ */
+
+#define TPM_HEADER_SIZE		10
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE		1260
+
+/**
+ * struct tpm_chip_priv - Information about a TPM, stored by the uclass
+ *
+ * These values must be set up by the device's probe() method before
+ * communcation is attempted. If the device has an xfer() method, this is
+ * not needed. There is no need to set up @buf.
+ *
+ * @duration_ms:	Length of each duration type in milliseconds
+ * @retry_time_ms:	Time to wait before retrying receive
+ */
+struct tpm_chip_priv {
+	uint duration_ms[TPM_DURATION_COUNT];
+	uint retry_time_ms;
+	u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)];  /* Max buffer size + addr */
+};
+
+/**
+ * struct tpm_ops - low-level TPM operations
+ *
+ * These are designed to avoid loops and delays in the driver itself. These
+ * should be handled in the uclass.
+ *
+ * In gneral you should implement everything except xfer(). Where you need
+ * complete control of the transfer, then xfer() can be provided and will
+ * override the other methods.
+ *
+ * This interface is for low-level TPM access. It does not understand the
+ * concept of localities or the various TPM messages. That interface is
+ * defined in the functions later on in this file, but they all translate
+ * to bytes which are sent and received.
+ */
+struct tpm_ops {
+	/**
+	 * open() - Request access to locality 0 for the caller
+	 *
+	 * After all commands have been completed the caller should call
+	 * close().
+	 *
+	 * @dev:	Device to close
+	 * @return 0 ok OK, -ve on error
+	 */
+	int (*open)(struct udevice *dev);
+
+	/**
+	 * close() - Close the current session
+	 *
+	 * Releasing the locked locality. Returns 0 on success, -ve 1 on
+	 * failure (in case lock removal did not succeed).
+	 *
+	 * @dev:	Device to close
+	 * @return 0 ok OK, -ve on error
+	 */
+	int (*close)(struct udevice *dev);
+
+	/**
+	 * get_desc() - Get a text description of the TPM
+	 *
+	 * @dev:	Device to check
+	 * @buf:	Buffer to put the string
+	 * @size:	Maximum size of buffer
+	 * @return length of string, or -ENOSPC it no space
+	 */
+	int (*get_desc)(struct udevice *dev, char *buf, int size);
+
+	/**
+	 * send() - send data to the TPM
+	 *
+	 * @dev:	Device to talk to
+	 * @sendbuf:	Buffer of the data to send
+	 * @send_size:	Size of the data to send
+	 *
+	 * Returns 0 on success or -ve on failure.
+	 */
+	int (*send)(struct udevice *dev, const u8 *sendbuf, size_t send_size);
+
+	/**
+	 * recv() - receive a response from the TPM
+	 *
+	 * @dev:	Device to talk to
+	 * @recvbuf:	Buffer to save the response to
+	 * @max_size:	Maximum number of bytes to receive
+	 *
+	 * Returns number of bytes received on success, -EAGAIN if the TPM
+	 * response is not ready, -EINTR if cancelled, or other -ve value on
+	 * failure.
+	 */
+	int (*recv)(struct udevice *dev, u8 *recvbuf, size_t max_size);
+
+	/**
+	 * cleanup() - clean up after an operation in progress
+	 *
+	 * This is called if receiving times out. The TPM may need to abort
+	 * the current transaction if it did not complete, and make itself
+	 * ready for another.
+	 *
+	 * @dev:	Device to talk to
+	 */
+	int (*cleanup)(struct udevice *dev);
+
+	/**
+	 * xfer() - send data to the TPM and get response
+	 *
+	 * This method is optional. If it exists it is used in preference
+	 * to send(), recv() and cleanup(). It should handle all aspects of
+	 * TPM communication for a single transfer.
+	 *
+	 * @dev:	Device to talk to
+	 * @sendbuf:	Buffer of the data to send
+	 * @send_size:	Size of the data to send
+	 * @recvbuf:	Buffer to save the response to
+	 * @recv_size:	Pointer to the size of the response buffer
+	 *
+	 * Returns 0 on success (and places the number of response bytes at
+	 * recv_size) or -ve on failure.
+	 */
+	int (*xfer)(struct udevice *dev, const u8 *sendbuf, size_t send_size,
+		    u8 *recvbuf, size_t *recv_size);
+};
+
+#define tpm_get_ops(dev)        ((struct tpm_ops *)device_get_ops(dev))
+
+#define MAKE_TPM_CMD_ENTRY(cmd) \
+	U_BOOT_CMD_MKENT(cmd, 0, 1, do_tpm_ ## cmd, "", "")
+
+#define TPM_COMMAND_NO_ARG(cmd)				\
+int do_##cmd(cmd_tbl_t *cmdtp, int flag,		\
+	     int argc, char * const argv[])		\
+{							\
+	if (argc != 1)					\
+		return CMD_RET_USAGE;			\
+	return report_return_code(cmd());		\
+}
+
+/**
+ * tpm_get_desc() - Get a text description of the TPM
+ *
+ * @dev:	Device to check
+ * @buf:	Buffer to put the string
+ * @size:	Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+int tpm_get_desc(struct udevice *dev, char *buf, int size);
+
+/**
+ * tpm_xfer() - send data to the TPM and get response
+ *
+ * This first uses the device's send() method to send the bytes. Then it calls
+ * recv() to get the reply. If recv() returns -EAGAIN then it will delay a
+ * short time and then call recv() again.
+ *
+ * Regardless of whether recv() completes successfully, it will then call
+ * cleanup() to finish the transaction.
+ *
+ * Note that the outgoing data is inspected to determine command type
+ * (ordinal) and a timeout is used for that command type.
+ *
+ * @sendbuf - buffer of the data to send
+ * @send_size size of the data to send
+ * @recvbuf - memory to save the response to
+ * @recv_len - pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_len) or -ve on failure.
+ */
+int tpm_xfer(struct udevice *dev, const u8 *sendbuf, size_t send_size,
+	     u8 *recvbuf, size_t *recv_size);
+
+/**
+ * Initialize TPM device.  It must be called before any TPM commands.
+ *
+ * @return 0 on success, non-0 on error.
+ */
+int tpm_init(void);
+
+/**
+ * Retrieve the array containing all the commands.
+ *
+ * @return a cmd_tbl_t array.
+ */
+cmd_tbl_t *get_tpm_commands(unsigned int *size);
+
+#endif /* __TPM_COMMON_H */