diff options
| author | Tom Rini <trini@konsulko.com> | 2021-12-11 14:55:51 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-12-27 08:41:38 -0500 |
| commit | f76750d1113380462413bad94d7a400af1aa4909 (patch) | |
| tree | 6aeeaa74374fd4f42f319ab6da9a84eb9ec2ce35 /include/configs | |
| parent | 66e0e2b1cd813ca7b857eb998cc5d2838f2c7b18 (diff) | |
| download | u-boot-f76750d1113380462413bad94d7a400af1aa4909.zip u-boot-f76750d1113380462413bad94d7a400af1aa4909.tar.gz u-boot-f76750d1113380462413bad94d7a400af1aa4909.tar.bz2 | |
Convert CONFIG_CONS_INDEX et al to Kconfig
This converts the following to Kconfig:
CONFIG_CONS_INDEX
CONFIG_DEBUG_UART_CLOCK
CONFIG_FSL_TZPC_BP147
CONFIG_GENERIC_ATMEL_MCI
CONFIG_IDENT_STRING
CONFIG_LIBATA
CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE
CONFIG_LPC32XX_GPIO
CONFIG_MP
CONFIG_MPC8XXX_GPIO
CONFIG_MTD_PARTITIONS
CONFIG_MVGBE
CONFIG_MXC_GPIO
CONFIG_NR_DRAM_BANKS
CONFIG_OF_BOARD_SETUP
CONFIG_OF_STDOUT_VIA_ALIAS
CONFIG_OF_SYSTEM_SETUP
CONFIG_PREBOOT
CONFIG_ROCKCHIP_SERIAL
CONFIG_RTC_ENABLE_32KHZ_OUTPUT
CONFIG_RTC_MV
CONFIG_SCSI_AHCI
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_SPEED
CONFIG_SOFT_SPI
CONFIG_SPI_FLASH_EON
CONFIG_SPI_FLASH_MACRONIX
CONFIG_SPI_FLASH_MTD
CONFIG_SPI_FLASH_SPANSION
CONFIG_SPI_FLASH_SST
CONFIG_SPI_FLASH_STMICRO
CONFIG_SUPPORT_RAW_INITRD
CONFIG_SYS_ARCH_TIMER
CONFIG_SYS_BOARD
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
CONFIG_SYS_DCACHE_OFF
CONFIG_SYS_FDT_SAVE_ADDRESS
CONFIG_SYS_FLASH_CFI
CONFIG_SYS_FSL_ERRATUM_ESDHC135
CONFIG_SYS_HAS_SERDES
CONFIG_SYS_L2CACHE_OFF
CONFIG_SYS_LITTLE_ENDIAN
CONFIG_SYS_LOAD_ADDR
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
CONFIG_SYS_NS16550
CONFIG_SYS_PLLFIN
CONFIG_SYS_SPI_U_BOOT_OFFS
CONFIG_TIMER_SYS_TICK_CH
CONFIG_USB_EHCI_FSL
CONFIG_U_QE
CONFIG_VERSION_VARIABLE
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs')
104 files changed, 0 insertions, 339 deletions
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1cf3670..9aeab70 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -326,7 +326,6 @@ */ #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d36a8e2..e09b9a4 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -110,7 +110,6 @@ #endif /* High Level Configuration Options */ -#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ @@ -573,7 +572,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ef4bb0b..d217a95 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -395,7 +395,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bf9f26e..782b16f 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -24,7 +24,6 @@ /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -61,7 +60,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 71394ae..e4666e1 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -24,7 +24,6 @@ /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -66,7 +65,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index faeba06..b543b86 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -452,7 +452,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index e702092..a0db427 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -460,7 +460,6 @@ #ifdef CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif #endif @@ -499,8 +498,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#define CONFIG_U_QE - #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 7344f93..bfd06a5 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -517,7 +517,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 979a997..afd9367 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -472,7 +472,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 12a11e2..9c412ec 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -498,7 +498,6 @@ unsigned long get_board_sys_clk(void); /* * USB */ -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index dfed161..13c8d8a 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -45,7 +45,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI diff --git a/include/configs/apple.h b/include/configs/apple.h index b1f6043..9cf20fc 100644 --- a/include/configs/apple.h +++ b/include/configs/apple.h @@ -5,8 +5,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x880000000 -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_TEXT_BASE - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial,usbkbd\0" \ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index e7f380b..98c8159 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -90,7 +90,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ -#define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 @@ -104,7 +103,6 @@ extern phys_addr_t prior_stage_fdt_address; */ #define V_NS16550_CLK 81000000 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK @@ -126,8 +124,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Flash configuration. */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_MACRONIX /* * Filesystem configuration. diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index e42f2b5..729c6a2 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -11,15 +11,12 @@ #include <asm/arch/imx-regs.h> #include "siemens-env-common.h" -#include "siemens-ccp-common.h" /* SPL config */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -35,9 +32,6 @@ #define CONFIG_FACTORYSET -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - #define CONFIG_REMAKE_ELF /* ENET Config */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 220eb81..36ca471 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -14,8 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,7 +31,6 @@ #define CONFIG_REMAKE_ELF /* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 0a7043a..17954fe 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */ -#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ /* Miscellaneous configuration options */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) @@ -50,6 +49,4 @@ #define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x1c /* 14 KiB offset */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index d61d759..e1723c9 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -13,7 +13,6 @@ #include "mx6_common.h" /* Machine config */ -#define CONFIG_SYS_LITTLE_ENDIAN /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index b103186..9a6f17f 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -35,7 +35,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index a04e7f98..9538342 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -392,7 +392,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/deneb.h b/include/configs/deneb.h index a33165c..f155bb8 100644 --- a/include/configs/deneb.h +++ b/include/configs/deneb.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "06") - /* DDR3 board total DDR is 2 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 7fbe9df..1e24d05 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -28,7 +28,6 @@ /* * GPIO */ -#define CONFIG_LPC32XX_GPIO /* * Ethernet diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 48d4c8a..081d5e9 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -25,7 +25,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 5570086..dc83ab7 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -84,9 +84,6 @@ */ /* nedded by compliance test in read mode */ -#if defined(CONFIG_SPL_CMT) -#define CONFIG_SYS_DCACHE_OFF -#endif /* Define own nand partitions */ #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index f9a739e..75409a4 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -66,7 +66,6 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 #endif diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index 558d6f9..b109a15 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -13,9 +13,6 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - /* Misc */ #define CONFIG_EXTRA_ENV_SETTINGS \ "" diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index 9049a9f..3c2155d 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,9 +10,6 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - /* Misc */ #define STR_HELPER(s) #s #define STR(s) STR_HELPER(s) diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 478a0c4..8d3449f 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -67,23 +67,6 @@ #define PHYS_SDRAM_12 (CONFIG_SYS_SDRAM_BASE + (11 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_12_SIZE SDRAM_BANK_SIZE -#define CONFIG_DEBUG_UART_CLOCK 132710400 - -#define CONFIG_PREBOOT \ -"echo Read pressed buttons status;" \ -"KEY_VOLUMEUP=gpa20;" \ -"KEY_HOME=gpa17;" \ -"KEY_VOLUMEDOWN=gpa21;" \ -"KEY_POWER=gpa00;" \ -"PRESSED=0;" \ -"RELEASED=1;" \ -"if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; " \ -"else setenv VOLUME_UP $RELEASED; fi;" \ -"if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; " \ -"else setenv VOLUME_DOWN $RELEASED; fi;" \ -"if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;" \ -"if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" - #ifndef MEM_LAYOUT_ENV_SETTINGS #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/giedi.h b/include/configs/giedi.h index dabb1fb..19a795b 100644 --- a/include/configs/giedi.h +++ b/include/configs/giedi.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - /* DDR3 board total DDR is 1 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index b03b45f..75bb073 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -50,11 +50,4 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 9880587..36e0a42 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 5d91de3..519353b 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 167ca19..dcb627c 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 4b22ba1..4c9550a 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -12,8 +12,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index f8d4142..28d2b71 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 438a382..63e8f5e 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -11,9 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index ab89321..da66ab4 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 30cce1a..267a40b 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7206c08..938b13c 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_STACK 0x187FF0 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 49a9526..8242fdb 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -104,8 +102,4 @@ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 9f55b03..54922b8 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (172 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -136,8 +134,4 @@ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 6b8d940..7f21e07 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -15,8 +15,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,9 +31,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 76ef124..f93dbdf 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,8 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -31,9 +29,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 501f465..2a02815 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_BOOTM_LEN (SZ_64M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index 64c0f5e..79feab3 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20240000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 99d25c1..241e872 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20280000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 4dbd53c..24dc4c9 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -362,7 +362,6 @@ * Retain non-DM serial port for debug purposes. */ #if !defined(CONFIG_DM_SERIAL) -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index ffc23de..bda4283 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ -#define CONFIG_LIBATA -#define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 88986f9..7cbea26 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -45,11 +45,6 @@ /* I2C */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 391f0f3..c61865c 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -8,9 +8,6 @@ #include "ls1012a_common.h" -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "ls1012afrwy" - /* Board Rev*/ #define BOARD_REV_A_B 0x0 #define BOARD_REV_C 0x00080000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 98c0433..cbcb3f7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -75,19 +75,16 @@ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_SST /* cs1 */ #define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ #define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_EON /* cs3 */ #define CONFIG_PCIE1 /* PCIE controller 1 */ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 222caa1..499dbe1 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -48,8 +48,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 - #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SPL_PAD_TO 0x1c000 @@ -100,9 +98,6 @@ CONFIG_SYS_SCSI_MAX_LUN) /* SPI */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * eTSEC @@ -174,9 +169,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #endif -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 252e32f..1dfad12 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -297,11 +297,6 @@ unsigned long get_board_sys_clk(void); */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index f70b6e9..3773a0a 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -75,7 +75,6 @@ #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index bbfee84..6fae28e 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -190,11 +190,6 @@ */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b443180..f47bc73 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -7,7 +7,6 @@ #define __L1028A_COMMON_H #define CONFIG_REMAKE_ELF -#define CONFIG_MP #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> @@ -32,11 +31,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 0975c74..3b4f822 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -112,11 +112,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* IFC */ #ifndef SPL_NO_IFC @@ -153,13 +148,6 @@ #endif /* DSPI */ -#ifndef SPL_NO_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif -#endif /* FMan ucode */ #ifndef SPL_NO_FMAN diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 515f420..d07d27d 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -110,11 +110,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 93edaaa..2e52108 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -49,11 +49,6 @@ #define CPU_RELEASE_ADDR secondary_boot_addr /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d001acf..0c22fa9 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -321,9 +321,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_EEPROM_BUS_NUM 0 #ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON #if !defined(CONFIG_TFABOOT) && \ !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #endif diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index cd58ee5..eea6ce5 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -61,11 +61,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index e67dee0..3fe0ce7 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -256,15 +256,7 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#endif -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 @@ -285,9 +277,7 @@ unsigned long get_board_sys_clk(void); */ #define RTC #define CONFIG_RTC_DS3231 1 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 674d27f..50d6b03 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -258,9 +258,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#if defined(CONFIG_FSL_DSPI) -#define CONFIG_SPI_FLASH_STMICRO -#endif /* * RTC configuration diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 0710004..7247736 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -11,7 +11,6 @@ #include <asm/arch/soc.h> #define CONFIG_REMAKE_ELF -#define CONFIG_FSL_TZPC_BP147 #define CONFIG_FSL_MEMAC #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE @@ -129,11 +128,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 5e857bd..e3f665f 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -124,8 +124,6 @@ #define CONFIG_IOMUX_LPSR -#define CONFIG_SOFT_SPI - #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 1 #if (CONFIG_FEC_ENET_DEV == 0) diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index c575798..0811019 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -21,7 +21,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index cf52a6d..54f496f 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -41,9 +41,4 @@ #define CONFIG_LBA48 #endif /* CONFIG_SATA */ -/* RTC driver configuration */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index bc21b79..620bf88 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -7,8 +7,6 @@ #ifndef __OCTEONTX2_COMMON_H__ #define __OCTEONTX2_COMMON_H__ -#define CONFIG_SUPPORT_RAW_INITRD - /** Maximum size of image supported for bootm (and bootable FIT images) */ #define CONFIG_SYS_BOOTM_LEN (256 << 20) diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 46908be..39e0d19 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -61,12 +61,6 @@ # define CONFIG_SYS_64BIT_LBA #endif -/***** SPI Defines *********/ -#ifdef CONFIG_DM_SPI_FLASH -# define CONFIG_SF_DEFAULT_BUS 0 -# define CONFIG_SF_DEFAULT_CS 0 -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 1a63f46..ed9b41d 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -13,7 +13,6 @@ #include <configs/exynos4-common.h> -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 70481b5..a482598 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -80,8 +80,6 @@ * Need to override existing one (smdk5420) with odroid so set_board_info will * use proper prefix when creating full board_name (SYS_BOARD + type) */ -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 365f61b..a2958e7 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -534,7 +534,6 @@ #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index bc3dc81..b03d3a4 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -26,8 +26,6 @@ /* Environment at end of QSPI, in the VER partition */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#define CONFIG_PREBOOT - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index a979736..d1d3d45 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 7ca3965..7a15edd 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f1b406f..cd0116d 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -115,10 +113,6 @@ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #define CONFIG_SYS_BOOTM_LEN SZ_128M #endif diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 3df5143..928ccb1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -10,8 +10,6 @@ #define CONFIG_REMAKE_ELF -#define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index b133d8e..00c453d 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -12,7 +12,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 8b7a0bb..97cacea 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index e7c0964..7449e81 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -22,7 +22,6 @@ /* spl size 32kb sram - 2kb bootrom */ #define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800) -#define CONFIG_ROCKCHIP_SERIAL 1 #define CONFIG_SPL_STACK 0x10087fff diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index a46b1ff..ef55ef0 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x110d0020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index abbb273..490da7c 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -15,7 +15,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 496f462..1664707 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -12,7 +12,6 @@ #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_BSS_START_ADDR 0x00400000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 2e94613..207ad00 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -104,16 +104,6 @@ (void *)PHY_BASEADDR_UART3} /*----------------------------------------------------------------------- - * PLL - */ -#define CONFIG_SYS_PLLFIN 24000000UL - -/*----------------------------------------------------------------------- - * Timer - */ -#define CONFIG_TIMER_SYS_TICK_CH 0 - -/*----------------------------------------------------------------------- * BACKLIGHT */ #ifndef CONFIG_S5P4418_ONEWIRE diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 680f6ce..29adab3 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -104,11 +103,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG_PHY -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI - #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 1eafff1..c29b34e 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index a62a5fa..c3a5c2a 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -25,11 +25,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -/* NAND flash */ - -/* SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 66000000 - #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ #define FAT_ENV_INTERFACE "mmc" diff --git a/include/configs/siemens-ccp-common.h b/include/configs/siemens-ccp-common.h deleted file mode 100644 index 01051c8..0000000 --- a/include/configs/siemens-ccp-common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* Be very careful updating CONFIG_IDENT_STRING - * This string will control the update flow whether an U-Boot should be - * updated or not. If the version of installed U-Boot (in flash) is smaller - * than the version to be installed (from update file), an update will - * be performed. - * - * General rules: - * 1. First 4 characters ' ##v' or IDENT_MAGIC represent kind of a magic number - * to identify the following strings after easily. Don't change them! - * - * 2. First 2 digits after 'v' or CCP_MAJOR are updated with U-Boot version - * change, e.g. from 2015.04 to 2018.03 - * - * 3. Second 2 digits after '.' or CCP_MINOR are updated if we want to upgrade - * U-Boot within an U-Boot version. - */ -#define CCP_IDENT_MAGIC " ##v" -#define GENERATE_CCP_VERSION(MAJOR, MINOR) CCP_IDENT_MAGIC MAJOR "." MINOR diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 8535678..920f314 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -74,10 +74,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV \ BOOTENV_SF - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif #endif /* __CONFIG_H */ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f68d7d7..574821c 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -72,10 +72,6 @@ "partitions=" PARTS_DEFAULT "\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_EEPROM_BUS_NUM 0 diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index de918e7..3889a88 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -45,9 +45,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT -/* MMC */ -#define CONFIG_GENERIC_ATMEL_MCI - /* LCD */ #define CONFIG_ATMEL_LCD #define CONFIG_GURNARD_SPLASH diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 31f95f5..155aece 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -187,10 +187,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif -#else -#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#endif #endif /* SPL QSPI boot support */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 4d7072c..aa2c032 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -60,7 +60,6 @@ /* Flash device info */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 673056c..99b7bd0 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -12,7 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ #include <asm/arch/tegra.h> /* get chip and board defs */ diff --git a/include/configs/trats.h b/include/configs/trats.h index d34b9e8..5217400 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -15,7 +15,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 32e7b91..8d4b782 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 1ce844f..bdd6b4b 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7fbec27..36bbf70 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 990f5ed..91d50bc 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -109,8 +109,6 @@ /* Board info register */ #define SYS_ID V2M_SYSREGS -#define CONFIG_SYS_L2CACHE_OFF 1 - #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 4967931..7bd4882 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -34,13 +34,11 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH_STMICRO #endif /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 58888d4..c60da8a 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_NS16550_CLK 40000000 #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM3 0xb0000e00 -#define CONFIG_CONS_INDEX 3 /* RAM */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index a45d3b4..9223aee 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -64,8 +64,6 @@ * GPIO */ -#define CONFIG_LPC32XX_GPIO - /* * Environment */ diff --git a/include/configs/xea.h b/include/configs/xea.h index 5b968f0..aa48bb9 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -29,10 +29,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SPI_FLASH_MTD -#endif - /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index c5e3d16..408c7b5 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -11,17 +11,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_NR_DRAM_BANKS #undef CONFIG_SYS_SDRAM_BASE -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * This can be any arbitrary address as we are using PIE, but - * please note, that CONFIG_SYS_TEXT_BASE must match the below. - */ -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 64 @@ -29,8 +20,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_OF_SYSTEM_SETUP - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 4de2f94..8f8a9c7 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -17,7 +17,6 @@ #define CONFIG_REMAKE_ELF /* Cache options */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF # define CONFIG_SYS_L2_PL310 # define CONFIG_SYS_PL310_BASE 0xf8f02000 |