include/configs: Use new CONFIG_CMD_* in various b* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

7 files changed, 156 insertions, 149 deletions

diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index d58344d..c1fdaf8 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -316,45 +316,46 @@
 #define USB_2_0_DEVICE
 #endif /*CONFIG_440EP*/
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_SNTP
+
 #ifdef CONFIG_BAMBOO_NAND
-#define _CFG_CMD_NAND CFG_CMD_NAND
-#else
-#define _CFG_CMD_NAND 0
-#endif /* CONFIG_BAMBOO_NAND */
+#define CONFIG_CMD_NAND
+#endif
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_USB	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_EXT2	| \
-				_CFG_CMD_NAND	| \
-				CFG_CMD_SNTP	)
 
 #define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
@@ -407,7 +408,7 @@
  */
 #define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -419,7 +420,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/barco.h b/include/configs/barco.h
index 624fa1d..225ab8d 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -78,14 +78,16 @@
 				 CONFIG_BOOTP_BOOTFILESIZE | \
 				 CONFIG_BOOTP_DNS)
 
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL | \
-				  CFG_CMD_ELF    | \
-				  CFG_CMD_I2C 	 | \
-				  CFG_CMD_EEPROM | \
-				  CFG_CMD_PCI    )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
-#include <cmd_confdefs.h>
 
 #define CONFIG_HUSH_PARSER	1 /* use "hush" command parser */
 #define CONFIG_BOOTDELAY 	1
@@ -340,7 +342,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 65dfc81..487ca6a 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -97,19 +97,22 @@
 #define CONFIG_LOADS_ECHO	1
 
 
-#define CONFIG_COMMANDS			(CONFIG_CMD_DFL	| \
-					 CFG_CMD_PING	| \
-					 CFG_CMD_ELF	| \
-					 CFG_CMD_I2C	| \
-					 CFG_CMD_JFFS2	| \
-					 CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_DATE
+
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
 
 #define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
 #define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 79a1404..f93c61e 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -240,23 +240,6 @@
 
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
 
-#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
-				 CFG_CMD_PING   | \
-				 CFG_CMD_ELF    | \
-				 CFG_CMD_CACHE  | \
-				 CFG_CMD_JFFS2  | \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_DATE)
-
-#else
-#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
-				 CFG_CMD_ELF    | \
-				 CFG_CMD_CACHE  | \
-				 CFG_CMD_JFFS2  | \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_DATE)
-#endif
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
 #if (CONFIG_DRIVER_SMC91111)
@@ -305,20 +288,30 @@
 #endif
 #endif
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_CMD_PING
+#endif
+
 #if (CONFIG_SOFT_I2C)
-#define CONFIG_COMMANDS2   CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS2 0
-#endif /* CONFIG_SOFT_I2C */
+#define CONFIG_CMD_I2C
+#endif
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CONFIG_COMMANDS  ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP)
-#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CONFIG_COMMANDS  ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2)
+#define CONFIG_CMD_DHCP
 #endif
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Console settings
@@ -345,7 +338,7 @@
 #endif
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
@@ -395,7 +388,7 @@
 /* Enabled below option for CF support */
 /* #define CONFIG_STAMP_CF	1 */
 
-#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_STAMP_CF) && defined(CONFIG_CMD_IDE)
 
 #define CONFIG_MISC_INIT_R	1
 #define CONFIG_DOS_PARTITION	1
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index f6755ac..1c23871 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -159,51 +159,58 @@
 
 #if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE)
 # define CONFIG_BFIN_IDE	1
-# define ADD_IDE_CMD		CFG_CMD_IDE
-#else
-# define ADD_IDE_CMD		0
 #endif
 
 /*#define CONFIG_BF537_NAND */		/* Add nand flash support */
 
-#ifdef CONFIG_BF537_NAND
-# define ADD_NAND_CMD		CFG_CMD_NAND
-#else
-# define ADD_NAND_CMD		0
-#endif
-
 #define CONFIG_NETCONSOLE	1
 #define CONFIG_NET_MULTI	1
 
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+
 #if (BFIN_CPU == ADSP_BF534)
-#define CONFIG_BFIN_CMD		(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#undef CONFIG_CMD_NET
 #else
-#define CONFIG_BFIN_CMD		(CONFIG_CMD_DFL | CFG_CMD_PING)
+#define CONFIG_CMD_PING
+#endif
+
+#if defined(CONFIG_BFIN_CF_IDE) \
+	|| defined(CONFIG_BFIN_HDD_IDE) \
+	|| defined(CONFIG_BFIN_TRUE_IDE)
+#define CONFIG_CMD_IDE
 #endif
 
+#endif
+
+
 #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
-#define CONFIG_COMMANDS		(CONFIG_BFIN_CMD| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_CACHE  | \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_DHCP   | \
-				 ADD_IDE_CMD	| \
-				 ADD_NAND_CMD	| \
-				 CFG_CMD_POST_DIAG | \
-				 CFG_CMD_DATE)
-#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-#define CONFIG_COMMANDS		(CONFIG_BFIN_CMD| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_CACHE  | \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_EEPROM | \
-				 ADD_IDE_CMD	| \
-				 CFG_CMD_DATE)
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_POST_DIAG
+
+#ifdef CONFIG_BF537_NAND
+#define CONFIG_CMD_NAND
 #endif
 
+#endif
+
+
+
+
 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
 #define CONFIG_LOADADDR	0x1000000
 
@@ -256,9 +263,6 @@
 #endif
 #endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
 #if (BFIN_CPU == ADSP_BF534)
 #define	CFG_PROMPT		"serial_bf534> "	/* Monitor Command Prompt */
@@ -277,7 +281,7 @@
 #endif
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
 #define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 8d826fa..40f5abc 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -164,12 +164,6 @@
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
 
 #if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_DHCP)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" 		\
 	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):"	\
@@ -186,20 +180,27 @@
 		"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
 	""
 #else
-#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL	| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_JFFS2)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"		\
 	"flashboot=bootm 0x20100000\0"					\
 	""
 #endif
 
-#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+
+#if defined(CONFIG_DRIVER_SMC91111)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#endif
+
 
 /*
  * Console settings
@@ -208,7 +209,7 @@
 
 #define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 10c48143..1689259 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -137,25 +137,28 @@
 
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Bubinga	*/
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_CACHE	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -166,7 +169,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -219,7 +222,7 @@
 #define CFG_I2C_NOPROBES	{ 0x69 }	/* avoid iprobe hangup (why?) */
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 
-#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+#if defined(CONFIG_CMD_EEPROM)
 #define CFG_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
 #define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 #endif
@@ -314,7 +317,7 @@
  */
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405EP CPU			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -426,7 +429,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif