diff options
| author | Alexey Brodkin <Alexey.Brodkin@synopsys.com> | 2016-06-27 13:17:51 +0300 |
|---|---|---|
| committer | Joe Hershberger <joe.hershberger@ni.com> | 2016-07-06 10:45:00 -0500 |
| commit | 66d027e22c55534135a43da794d31fcc98509913 (patch) | |
| tree | e7b351d550528beb390f5176dadad516e6569ac1 /drivers | |
| parent | 2307ea4053cdf45174f842312d07f538bf5be5f6 (diff) | |
| download | u-boot-66d027e22c55534135a43da794d31fcc98509913.zip u-boot-66d027e22c55534135a43da794d31fcc98509913.tar.gz u-boot-66d027e22c55534135a43da794d31fcc98509913.tar.bz2 | |
net: designware: Make driver independent from DM_GPIO again
Commit 90b7fc924adf "net: designware: support phy reset device-tree
bindings" made DW GMAC driver dependent on DM_GPIO by unconditional
usage of purely DM_GPIO stuff like:
* dm_gpio_XXX()
* gpio_request_by_name()
But since that driver as of today might be easily used without
DM_GPIO (that's the case for Synopsys AXS10x boards) we're
shielding all DM_GPIO things by ifdefs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/designware.c | 10 | ||||
| -rw-r--r-- | drivers/net/designware.h | 7 |
2 files changed, 14 insertions, 3 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8858f07..8ba72e3 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -80,7 +80,7 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, return ret; } -#if CONFIG_DM_ETH +#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO) static int dw_mdio_reset(struct mii_dev *bus) { struct udevice *dev = bus->priv; @@ -126,7 +126,7 @@ static int dw_mdio_init(const char *name, void *priv) bus->read = dw_mdio_read; bus->write = dw_mdio_write; snprintf(bus->name, sizeof(bus->name), "%s", name); -#ifdef CONFIG_DM_ETH +#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO) bus->reset = dw_mdio_reset; #endif @@ -690,11 +690,15 @@ static const struct eth_ops designware_eth_ops = { static int designware_eth_ofdata_to_platdata(struct udevice *dev) { struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev); +#ifdef CONFIG_DM_GPIO struct dw_eth_dev *priv = dev_get_priv(dev); +#endif struct eth_pdata *pdata = &dw_pdata->eth_pdata; const char *phy_mode; const fdt32_t *cell; +#ifdef CONFIG_DM_GPIO int reset_flags = GPIOD_IS_OUT; +#endif int ret = 0; pdata->iobase = dev_get_addr(dev); @@ -712,6 +716,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) if (cell) pdata->max_speed = fdt32_to_cpu(*cell); +#ifdef CONFIG_DM_GPIO if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset, "snps,reset-active-low")) reset_flags |= GPIOD_ACTIVE_LOW; @@ -724,6 +729,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) } else if (ret == -ENOENT) { ret = 0; } +#endif return ret; } diff --git a/drivers/net/designware.h b/drivers/net/designware.h index 51ba769..d345c5b 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -8,7 +8,9 @@ #ifndef _DW_ETH_H #define _DW_ETH_H -#include <asm/gpio.h> +#ifdef CONFIG_DM_GPIO +#include <asm-generic/gpio.h> +#endif #define CONFIG_TX_DESCR_NUM 16 #define CONFIG_RX_DESCR_NUM 16 @@ -234,7 +236,10 @@ struct dw_eth_dev { #ifndef CONFIG_DM_ETH struct eth_device *dev; #endif +#ifdef CONFIG_DM_GPIO struct gpio_desc reset_gpio; +#endif + struct phy_device *phydev; struct mii_dev *bus; }; |