diff options
author | Grzegorz Jaszczyk <jaz@semihalf.com> | 2020-10-18 17:11:12 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2020-10-29 08:00:12 +0100 |
commit | 0a1a1642aa6674777b8a3ea593c915d742a47dc4 (patch) | |
tree | aeb3ad8a4e97484289d7a464f55cb30092a8dc41 /drivers/phy | |
parent | b24bb99df10542bd4ec3cfa310e28b4544fbc847 (diff) | |
download | u-boot-0a1a1642aa6674777b8a3ea593c915d742a47dc4.zip u-boot-0a1a1642aa6674777b8a3ea593c915d742a47dc4.tar.gz u-boot-0a1a1642aa6674777b8a3ea593c915d742a47dc4.tar.bz2 |
phy: marvell: cp110: let the firmware configure comphy for PCIe
Replace the comphy initialization for PCIe with appropriate SMC call, so
the firmware will perform appropriate comphy initialization.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/marvell/comphy_cp110.c | 451 |
1 files changed, 12 insertions, 439 deletions
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 31baa0b..5b6aaa6 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -31,6 +31,11 @@ DECLARE_GLOBAL_DATA_PTR; #define COMPHY_FW_MODE_FORMAT(mode) ((mode) << 12) #define COMPHY_FW_FORMAT(mode, idx, speeds) \ (((mode) << 12) | ((idx) << 8) | ((speeds) << 2)) + +#define COMPHY_FW_PCIE_FORMAT(pcie_width, clk_src, mode, speeds) \ + (((pcie_width) << 18) | ((clk_src) << 17) | \ + COMPHY_FW_FORMAT(mode, 0, speeds)) + #define COMPHY_SATA_MODE 0x1 #define COMPHY_SGMII_MODE 0x2 /* SGMII 1G */ #define COMPHY_HS_SGMII_MODE 0x3 /* SGMII 2.5G */ @@ -112,441 +117,6 @@ static u32 polling_with_timeout(void __iomem *addr, u32 val, return 0; } -static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src, - bool is_end_point, void __iomem *hpipe_base, - void __iomem *comphy_base) -{ - u32 mask, data, ret = 1; - void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); - void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); - void __iomem *addr; - u32 pcie_clk = 0; /* set input by default */ - - debug_enter(); - - /* - * ToDo: - * Add SAR (Sample-At-Reset) configuration for the PCIe clock - * direction. SAR code is currently not ported from Marvell - * U-Boot to mainline version. - * - * SerDes Lane 4/5 got the PCIe ref-clock #1, - * and SerDes Lane 0 got PCIe ref-clock #0 - */ - debug("PCIe clock = %x\n", pcie_clk); - debug("PCIe RC = %d\n", !is_end_point); - debug("PCIe width = %d\n", pcie_width); - - /* enable PCIe by4 and by2 */ - if (lane == 0) { - if (pcie_width == 4) { - reg_set(comphy_base + COMMON_PHY_SD_CTRL1, - 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET, - COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK); - } else if (pcie_width == 2) { - reg_set(comphy_base + COMMON_PHY_SD_CTRL1, - 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET, - COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK); - } - } - - /* - * If PCIe clock is output and clock source from SerDes lane 5, - * we need to configure the clock-source MUX. - * By default, the clock source is from lane 4 - */ - if (pcie_clk && clk_src && (lane == 5)) { - reg_set((void __iomem *)DFX_DEV_GEN_CTRL12, - 0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET, - DFX_DEV_GEN_PCIE_CLK_SRC_MASK); - } - - debug("stage: RFU configurations - hard reset comphy\n"); - /* RFU configurations - hard reset comphy */ - mask = COMMON_PHY_CFG1_PWR_UP_MASK; - data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; - mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; - data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; - mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK; - data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; - mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; - data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; - mask |= COMMON_PHY_PHY_MODE_MASK; - data |= 0x0 << COMMON_PHY_PHY_MODE_OFFSET; - reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); - - /* release from hard reset */ - mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK; - data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; - mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; - data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; - reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); - - /* Wait 1ms - until band gap and ref clock ready */ - mdelay(1); - /* Start comphy Configuration */ - debug("stage: Comphy configuration\n"); - /* Set PIPE soft reset */ - mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK; - data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET; - /* Set PHY datapath width mode for V0 */ - mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK; - data |= 0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET; - /* Set Data bus width USB mode for V0 */ - mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK; - data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET; - /* Set CORE_CLK output frequency for 250Mhz */ - mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK; - data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET; - reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask); - /* Set PLL ready delay for 0x2 */ - data = 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET; - mask = HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK; - if (pcie_width != 1) { - data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET; - mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK; - data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET; - mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK; - } - reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, data, mask); - - /* Set PIPE mode interface to PCIe3 - 0x1 & set lane order */ - data = 0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET; - mask = HPIPE_CLK_SRC_HI_MODE_PIPE_MASK; - if (pcie_width != 1) { - mask |= HPIPE_CLK_SRC_HI_LANE_STRT_MASK; - mask |= HPIPE_CLK_SRC_HI_LANE_MASTER_MASK; - mask |= HPIPE_CLK_SRC_HI_LANE_BREAK_MASK; - if (lane == 0) { - data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET; - data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET; - } else if (lane == (pcie_width - 1)) { - data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET; - } - } - reg_set(hpipe_addr + HPIPE_CLK_SRC_HI_REG, data, mask); - /* Config update polarity equalization */ - reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG1_REG, - 0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET, - HPIPE_CFG_UPDATE_POLARITY_MASK); - /* Set PIPE version 4 to mode enable */ - reg_set(hpipe_addr + HPIPE_DFE_CTRL_28_REG, - 0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET, - HPIPE_DFE_CTRL_28_PIPE4_MASK); - /* TODO: check if pcie clock is output/input - for bringup use input*/ - /* Enable PIN clock 100M_125M */ - mask = 0; - data = 0; - /* Only if clock is output, configure the clock-source mux */ - if (pcie_clk) { - mask |= HPIPE_MISC_CLK100M_125M_MASK; - data |= 0x1 << HPIPE_MISC_CLK100M_125M_OFFSET; - } - /* - * Set PIN_TXDCLK_2X Clock Frequency Selection for outputs 500MHz - * clock - */ - mask |= HPIPE_MISC_TXDCLK_2X_MASK; - data |= 0x0 << HPIPE_MISC_TXDCLK_2X_OFFSET; - /* Enable 500MHz Clock */ - mask |= HPIPE_MISC_CLK500_EN_MASK; - data |= 0x1 << HPIPE_MISC_CLK500_EN_OFFSET; - if (pcie_clk) { /* output */ - /* Set reference clock comes from group 1 */ - mask |= HPIPE_MISC_REFCLK_SEL_MASK; - data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; - } else { - /* Set reference clock comes from group 2 */ - mask |= HPIPE_MISC_REFCLK_SEL_MASK; - data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET; - } - mask |= HPIPE_MISC_ICP_FORCE_MASK; - data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; - reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); - if (pcie_clk) { /* output */ - /* Set reference frequcency select - 0x2 for 25MHz*/ - mask = HPIPE_PWR_PLL_REF_FREQ_MASK; - data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; - } else { - /* Set reference frequcency select - 0x0 for 100MHz*/ - mask = HPIPE_PWR_PLL_REF_FREQ_MASK; - data = 0x0 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; - } - /* Set PHY mode to PCIe */ - mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; - data |= 0x3 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; - reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); - - /* ref clock alignment */ - if (pcie_width != 1) { - mask = HPIPE_LANE_ALIGN_OFF_MASK; - data = 0x0 << HPIPE_LANE_ALIGN_OFF_OFFSET; - reg_set(hpipe_addr + HPIPE_LANE_ALIGN_REG, data, mask); - } - - /* - * Set the amount of time spent in the LoZ state - set for 0x7 only if - * the PCIe clock is output - */ - if (pcie_clk) { - reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL, - 0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET, - HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK); - } - - /* Set Maximal PHY Generation Setting(8Gbps) */ - mask = HPIPE_INTERFACE_GEN_MAX_MASK; - data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET; - /* Bypass frame detection and sync detection for RX DATA */ - mask = HPIPE_INTERFACE_DET_BYPASS_MASK; - data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET; - /* Set Link Train Mode (Tx training control pins are used) */ - mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK; - data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET; - reg_set(hpipe_addr + HPIPE_INTERFACE_REG, data, mask); - - /* Set Idle_sync enable */ - mask = HPIPE_PCIE_IDLE_SYNC_MASK; - data = 0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET; - /* Select bits for PCIE Gen3(32bit) */ - mask |= HPIPE_PCIE_SEL_BITS_MASK; - data |= 0x2 << HPIPE_PCIE_SEL_BITS_OFFSET; - reg_set(hpipe_addr + HPIPE_PCIE_REG0, data, mask); - - /* Enable Tx_adapt_g1 */ - mask = HPIPE_TX_TRAIN_CTRL_G1_MASK; - data = 0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET; - /* Enable Tx_adapt_gn1 */ - mask |= HPIPE_TX_TRAIN_CTRL_GN1_MASK; - data |= 0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET; - /* Disable Tx_adapt_g0 */ - mask |= HPIPE_TX_TRAIN_CTRL_G0_MASK; - data |= 0x0 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask); - - /* Set reg_tx_train_chk_init */ - mask = HPIPE_TX_TRAIN_CHK_INIT_MASK; - data = 0x0 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET; - /* Enable TX_COE_FM_PIN_PCIE3_EN */ - mask |= HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK; - data |= 0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask); - - debug("stage: TRx training parameters\n"); - /* Set Preset sweep configurations */ - mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK; - data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET; - - mask |= HPIPE_TX_NUM_OF_PRESET_MASK; - data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET; - - mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK; - data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_11_REG, data, mask); - - /* Tx train start configuration */ - mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK; - data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET; - - mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK; - data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET; - - mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK; - data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET; - - mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK; - data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask); - - /* Enable Tx train P2P */ - mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK; - data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask); - - /* Configure Tx train timeout */ - mask = HPIPE_TRX_TRAIN_TIMER_MASK; - data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_4_REG, data, mask); - - /* Disable G0/G1/GN1 adaptation */ - mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK - | HPIPE_TX_TRAIN_CTRL_G0_OFFSET; - data = 0; - reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask); - - /* Disable DTL frequency loop */ - mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK; - data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); - - /* Configure G3 DFE */ - mask = HPIPE_G3_DFE_RES_MASK; - data = 0x3 << HPIPE_G3_DFE_RES_OFFSET; - reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask); - - /* Use TX/RX training result for DFE */ - mask = HPIPE_DFE_RES_FORCE_MASK; - data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET; - reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); - - /* Configure initial and final coefficient value for receiver */ - mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK; - data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET; - - mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK; - data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET; - - mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK; - data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask); - - /* Trigger sampler enable pulse */ - mask = HPIPE_SMAPLER_MASK; - data = 0x1 << HPIPE_SMAPLER_OFFSET; - reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); - udelay(5); - reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, mask); - - /* FFE resistor tuning for different bandwidth */ - mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK; - data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET; - - mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK; - data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET; - reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask); - - /* Pattern lock lost timeout disable */ - mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK; - data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask); - - /* Configure DFE adaptations */ - mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK; - data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET; - mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK; - data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET; - mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK; - data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET; - reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask); - mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK; - data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET; - reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask); - - /* Genration 2 setting 1*/ - mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK; - data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET; - mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK; - data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET; - mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK; - data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET; - reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask); - - /* DFE enable */ - mask = HPIPE_G2_DFE_RES_MASK; - data = 0x3 << HPIPE_G2_DFE_RES_OFFSET; - reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask); - - /* Configure DFE Resolution */ - mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK; - data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET; - reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask); - - /* VDD calibration control */ - mask = HPIPE_EXT_SELLV_RXSAMPL_MASK; - data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET; - reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask); - - /* Set PLL Charge-pump Current Control */ - mask = HPIPE_G3_SETTING_5_G3_ICP_MASK; - data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET; - reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask); - - /* Set lane rqualization remote setting */ - mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK; - data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET; - mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK; - data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET; - mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK; - data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET; - reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask); - - if (!is_end_point) { - /* Set phy in root complex mode */ - mask = HPIPE_CFG_PHY_RC_EP_MASK; - data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET; - reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask); - } - - debug("stage: Comphy power up\n"); - - /* - * For PCIe by4 or by2 - release from reset only after finish to - * configure all lanes - */ - if ((pcie_width == 1) || (lane == (pcie_width - 1))) { - u32 i, start_lane, end_lane; - - if (pcie_width != 1) { - /* allows writing to all lanes in one write */ - reg_set(comphy_base + COMMON_PHY_SD_CTRL1, - 0x0 << - COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET, - COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK); - start_lane = 0; - end_lane = pcie_width; - - /* - * Release from PIPE soft reset - * for PCIe by4 or by2 - release from soft reset - * all lanes - can't use read modify write - */ - reg_set(HPIPE_ADDR(hpipe_base, 0) + - HPIPE_RST_CLK_CTRL_REG, 0x24, 0xffffffff); - } else { - start_lane = lane; - end_lane = lane + 1; - - /* - * Release from PIPE soft reset - * for PCIe by4 or by2 - release from soft reset - * all lanes - */ - reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, - 0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET, - HPIPE_RST_CLK_CTRL_PIPE_RST_MASK); - } - - - if (pcie_width != 1) { - /* disable writing to all lanes with one write */ - reg_set(comphy_base + COMMON_PHY_SD_CTRL1, - 0x3210 << - COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET, - COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK); - } - - debug("stage: Check PLL\n"); - /* Read lane status */ - for (i = start_lane; i < end_lane; i++) { - addr = HPIPE_ADDR(hpipe_base, i) + - HPIPE_LANE_STATUS1_REG; - data = HPIPE_LANE_STATUS1_PCLK_EN_MASK; - mask = data; - data = polling_with_timeout(addr, data, mask, 15000); - if (data != 0) { - debug("Read from reg = %p - value = 0x%x\n", - hpipe_addr + HPIPE_LANE_STATUS1_REG, - data); - pr_err("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n"); - ret = 0; - } - } - } - - debug_exit(); - return ret; -} - static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base, void __iomem *comphy_base) { @@ -1346,10 +916,13 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, case PHY_TYPE_PEX1: case PHY_TYPE_PEX2: case PHY_TYPE_PEX3: - ret = comphy_pcie_power_up( - lane, pcie_width, ptr_comphy_map->clk_src, - serdes_map->end_point, - hpipe_base_addr, comphy_base_addr); + mode = COMPHY_FW_PCIE_FORMAT(pcie_width, + ptr_comphy_map->clk_src, + COMPHY_PCIE_MODE, + ptr_comphy_map->speed); + ret = comphy_smc(MV_SIP_COMPHY_POWER_ON, + ptr_chip_cfg->comphy_base_addr, lane, + mode); break; case PHY_TYPE_SATA0: case PHY_TYPE_SATA1: |