net: fm: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

6 files changed, 0 insertions, 689 deletions

diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 5a7d303..b34209d 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -6,7 +6,6 @@ obj-y += dtsec.o
 obj-y += eth.o
 obj-y += fdt.o
 obj-y += fm.o
-obj-y += init.o
 obj-y += tgec.o
 obj-y += tgec_phy.o
 
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index c8381cc..9fd26de 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -8,12 +8,10 @@
 #include <log.h>
 #include <part.h>
 #include <asm/io.h>
-#ifdef CONFIG_DM_ETH
 #include <dm.h>
 #include <dm/ofnode.h>
 #include <linux/compat.h>
 #include <phy_interface.h>
-#endif
 #include <malloc.h>
 #include <net.h>
 #include <hwconfig.h>
@@ -28,11 +26,6 @@
 
 #include "fm.h"
 
-#ifndef CONFIG_DM_ETH
-static struct eth_device *devlist[NUM_FM_PORTS];
-static int num_controllers;
-#endif
-
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
 
 #define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \
@@ -53,14 +46,10 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
 			PHY_INTERFACE_MODE_2500BASEX) ? true : false;
 	int i = 0, j;
 
-#ifndef CONFIG_DM_ETH
-	bus.priv = priv->mac->phyregs;
-#else
 	bus.priv = priv->pcs_mdio;
 	bus.read = memac_mdio_read;
 	bus.write = memac_mdio_write;
 	bus.reset = memac_mdio_reset;
-#endif
 
 qsgmii_loop:
 	/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
@@ -136,19 +125,6 @@ static void dtsec_init_phy(struct fm_eth *fm_eth)
 	    fm_eth->enet_if == PHY_INTERFACE_MODE_2500BASEX)
 		dtsec_configure_serdes(fm_eth);
 }
-
-#ifndef CONFIG_DM_ETH
-#ifdef CONFIG_PHYLIB
-static int tgec_is_fibre(struct fm_eth *fm)
-{
-	char phyopt[20];
-
-	sprintf(phyopt, "fsl_fm%d_xaui_phy", fm->fm_index + 1);
-
-	return hwconfig_arg_cmp(phyopt, "xfi");
-}
-#endif
-#endif /* CONFIG_DM_ETH */
 #endif
 
 static u16 muram_readw(u16 *addr)
@@ -465,18 +441,10 @@ static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth)
 	sync();
 }
 
-#ifndef CONFIG_DM_ETH
-static int fm_eth_open(struct eth_device *dev, struct bd_info *bd)
-#else
 static int fm_eth_open(struct udevice *dev)
-#endif
 {
-#ifndef CONFIG_DM_ETH
-	struct fm_eth *fm_eth = dev->priv;
-#else
 	struct eth_pdata *pdata = dev_get_plat(dev);
 	struct fm_eth *fm_eth = dev_get_priv(dev);
-#endif
 	unsigned char *enetaddr;
 	struct fsl_enet_mac *mac;
 #ifdef CONFIG_PHYLIB
@@ -485,11 +453,7 @@ static int fm_eth_open(struct udevice *dev)
 
 	mac = fm_eth->mac;
 
-#ifndef CONFIG_DM_ETH
-	enetaddr = &dev->enetaddr[0];
-#else
 	enetaddr = pdata->enetaddr;
-#endif
 
 	/* setup the MAC address */
 	if (enetaddr[0] & 0x01) {
@@ -512,12 +476,7 @@ static int fm_eth_open(struct udevice *dev)
 	if (fm_eth->phydev) {
 		ret = phy_startup(fm_eth->phydev);
 		if (ret) {
-#ifndef CONFIG_DM_ETH
-			printf("%s: Could not initialize\n",
-			       fm_eth->phydev->dev->name);
-#else
 			printf("%s: Could not initialize\n", dev->name);
-#endif
 			return ret;
 		}
 	} else {
@@ -540,20 +499,12 @@ static int fm_eth_open(struct udevice *dev)
 	return fm_eth->phydev->link ? 0 : -1;
 }
 
-#ifndef CONFIG_DM_ETH
-static void fm_eth_halt(struct eth_device *dev)
-#else
 static void fm_eth_halt(struct udevice *dev)
-#endif
 {
 	struct fm_eth *fm_eth;
 	struct fsl_enet_mac *mac;
 
-#ifndef CONFIG_DM_ETH
-	fm_eth = (struct fm_eth *)dev->priv;
-#else
 	fm_eth = dev_get_priv(dev);
-#endif
 	mac = fm_eth->mac;
 
 	/* graceful stop the transmission of frames */
@@ -571,11 +522,7 @@ static void fm_eth_halt(struct udevice *dev)
 #endif
 }
 
-#ifndef CONFIG_DM_ETH
-static int fm_eth_send(struct eth_device *dev, void *buf, int len)
-#else
 static int fm_eth_send(struct udevice *dev, void *buf, int len)
-#endif
 {
 	struct fm_eth *fm_eth;
 	struct fm_port_global_pram *pram;
@@ -583,11 +530,7 @@ static int fm_eth_send(struct udevice *dev, void *buf, int len)
 	u16 offset_in;
 	int i;
 
-#ifndef CONFIG_DM_ETH
-	fm_eth = (struct fm_eth *)dev->priv;
-#else
 	fm_eth = dev_get_priv(dev);
-#endif
 	pram = fm_eth->tx_pram;
 	txbd = fm_eth->cur_txbd;
 
@@ -668,11 +611,7 @@ static struct fm_port_bd *fm_eth_free_one(struct fm_eth *fm_eth,
 	return rxbd;
 }
 
-#ifndef CONFIG_DM_ETH
-static int fm_eth_recv(struct eth_device *dev)
-#else
 static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
-#endif
 {
 	struct fm_eth *fm_eth;
 	struct fm_port_bd *rxbd;
@@ -681,11 +620,7 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
 	int ret = -1;
 	u8 *data;
 
-#ifndef CONFIG_DM_ETH
-	fm_eth = (struct fm_eth *)dev->priv;
-#else
 	fm_eth = dev_get_priv(dev);
-#endif
 	rxbd = fm_eth->cur_rxbd;
 	status = muram_readw(&rxbd->status);
 
@@ -695,12 +630,8 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
 			buf_lo = in_be32(&rxbd->buf_ptr_lo);
 			data = (u8 *)((ulong)(buf_hi << 16) << 16 | buf_lo);
 			len = muram_readw(&rxbd->len);
-#ifndef CONFIG_DM_ETH
-			net_process_received_packet(data, len);
-#else
 			*packetp = data;
 			return len;
-#endif
 		} else {
 			printf("%s: Rx error\n", dev->name);
 			ret = 0;
@@ -717,7 +648,6 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
 	return ret;
 }
 
-#ifdef CONFIG_DM_ETH
 static int fm_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
 {
 	struct fm_eth *fm_eth = (struct fm_eth *)dev_get_priv(dev);
@@ -726,65 +656,7 @@ static int fm_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
 
 	return 0;
 }
-#endif /* CONFIG_DM_ETH */
-
-#ifndef CONFIG_DM_ETH
-static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
-{
-	struct fsl_enet_mac *mac;
-	int num;
-	void *base, *phyregs = NULL;
-
-	num = fm_eth->num;
-
-#ifdef CONFIG_SYS_FMAN_V3
-#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
-	if (fm_eth->type == FM_ETH_10G_E) {
-		/* 10GEC1/10GEC2 use mEMAC9/mEMAC10 on T2080/T4240.
-		 * 10GEC3/10GEC4 use mEMAC1/mEMAC2 on T2080.
-		 * 10GEC1 uses mEMAC1 on T1024.
-		 * so it needs to change the num.
-		 */
-		if (fm_eth->num >= 2)
-			num -= 2;
-		else
-			num += 8;
-	}
-#endif
-	base = &reg->memac[num].fm_memac;
-	phyregs = &reg->memac[num].fm_memac_mdio;
-#else
-	/* Get the mac registers base address */
-	if (fm_eth->type == FM_ETH_1G_E) {
-		base = &reg->mac_1g[num].fm_dtesc;
-		phyregs = &reg->mac_1g[num].fm_mdio.miimcfg;
-	} else {
-		base = &reg->mac_10g[num].fm_10gec;
-		phyregs = &reg->mac_10g[num].fm_10gec_mdio;
-	}
-#endif
-
-	/* alloc mac controller */
-	mac = malloc(sizeof(struct fsl_enet_mac));
-	if (!mac)
-		return -ENOMEM;
-	memset(mac, 0, sizeof(struct fsl_enet_mac));
-
-	/* save the mac to fm_eth struct */
-	fm_eth->mac = mac;
-
-#ifdef CONFIG_SYS_FMAN_V3
-	init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
-#else
-	if (fm_eth->type == FM_ETH_1G_E)
-		init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
-	else
-		init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
-#endif
 
-	return 0;
-}
-#else /* CONFIG_DM_ETH */
 static int fm_eth_init_mac(struct fm_eth *fm_eth, void *reg)
 {
 #ifndef CONFIG_SYS_FMAN_V3
@@ -817,15 +689,11 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, void *reg)
 
 	return 0;
 }
-#endif /* CONFIG_DM_ETH */
 
 static int init_phy(struct fm_eth *fm_eth)
 {
 #ifdef CONFIG_PHYLIB
 	u32 supported = PHY_GBIT_FEATURES;
-#ifndef CONFIG_DM_ETH
-	struct phy_device *phydev = NULL;
-#endif
 
 	if (fm_eth->type == FM_ETH_10G_E)
 		supported = PHY_10G_FEATURES;
@@ -836,7 +704,6 @@ static int init_phy(struct fm_eth *fm_eth)
 	if (fm_eth->type == FM_ETH_1G_E)
 		dtsec_init_phy(fm_eth);
 
-#ifdef CONFIG_DM_ETH
 #ifdef CONFIG_PHYLIB
 #ifdef CONFIG_DM_MDIO
 	fm_eth->phydev = dm_eth_phy_connect(fm_eth->dev);
@@ -848,112 +715,8 @@ static int init_phy(struct fm_eth *fm_eth)
 
 	phy_config(fm_eth->phydev);
 #endif
-#else /* CONFIG_DM_ETH */
-#ifdef CONFIG_PHYLIB
-	if (fm_eth->bus) {
-		phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, fm_eth->dev,
-				     fm_eth->enet_if);
-		if (!phydev) {
-			printf("Failed to connect\n");
-			return -1;
-		}
-	} else {
-		return 0;
-	}
-
-	if (fm_eth->type == FM_ETH_1G_E) {
-		supported = (SUPPORTED_10baseT_Half |
-				SUPPORTED_10baseT_Full |
-				SUPPORTED_100baseT_Half |
-				SUPPORTED_100baseT_Full |
-				SUPPORTED_1000baseT_Full);
-	} else {
-		supported = SUPPORTED_10000baseT_Full;
-
-		if (tgec_is_fibre(fm_eth))
-			phydev->port = PORT_FIBRE;
-	}
-
-	phydev->supported &= supported;
-	phydev->advertising = phydev->supported;
-
-	fm_eth->phydev = phydev;
-
-	phy_config(phydev);
-#endif
-#endif /* CONFIG_DM_ETH */
-	return 0;
-}
-
-#ifndef CONFIG_DM_ETH
-int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)
-{
-	struct eth_device *dev;
-	struct fm_eth *fm_eth;
-	int i, num = info->num;
-	int ret;
-
-	/* alloc eth device */
-	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
-	if (!dev)
-		return -ENOMEM;
-	memset(dev, 0, sizeof(struct eth_device));
-
-	/* alloc the FMan ethernet private struct */
-	fm_eth = (struct fm_eth *)malloc(sizeof(struct fm_eth));
-	if (!fm_eth)
-		return -ENOMEM;
-	memset(fm_eth, 0, sizeof(struct fm_eth));
-
-	/* save off some things we need from the info struct */
-	fm_eth->fm_index = info->index - 1; /* keep as 0 based for muram */
-	fm_eth->num = num;
-	fm_eth->type = info->type;
-
-	fm_eth->rx_port = (void *)&reg->port[info->rx_port_id - 1].fm_bmi;
-	fm_eth->tx_port = (void *)&reg->port[info->tx_port_id - 1].fm_bmi;
-
-	/* set the ethernet max receive length */
-	fm_eth->max_rx_len = MAX_RXBUF_LEN;
-
-	/* init global mac structure */
-	ret = fm_eth_init_mac(fm_eth, reg);
-	if (ret)
-		return ret;
-
-	/* keep same as the manual, we call FMAN1, FMAN2, DTSEC1, DTSEC2, etc */
-	if (fm_eth->type == FM_ETH_1G_E)
-		sprintf(dev->name, "FM%d@DTSEC%d", info->index, num + 1);
-	else
-		sprintf(dev->name, "FM%d@TGEC%d", info->index, num + 1);
-
-	devlist[num_controllers++] = dev;
-	dev->iobase = 0;
-	dev->priv = (void *)fm_eth;
-	dev->init = fm_eth_open;
-	dev->halt = fm_eth_halt;
-	dev->send = fm_eth_send;
-	dev->recv = fm_eth_recv;
-	fm_eth->dev = dev;
-	fm_eth->bus = info->bus;
-	fm_eth->phyaddr = info->phy_addr;
-	fm_eth->enet_if = info->enet_if;
-
-	/* startup the FM im */
-	ret = fm_eth_startup(fm_eth);
-	if (ret)
-		return ret;
-
-	init_phy(fm_eth);
-
-	/* clear the ethernet address */
-	for (i = 0; i < 6; i++)
-		dev->enetaddr[i] = 0;
-	eth_register(dev);
-
 	return 0;
 }
-#else /* CONFIG_DM_ETH */
 
 static int fm_eth_bind(struct udevice *dev)
 {
@@ -1139,4 +902,3 @@ U_BOOT_DRIVER(eth_fman) = {
 	.plat_auto	= sizeof(struct eth_pdata),
 	.flags = DM_FLAG_ALLOC_PRIV_DMA,
 };
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index c476cb3..055dd61 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -10,9 +10,7 @@
 #include <asm/io.h>
 #include <linux/errno.h>
 #include <u-boot/crc.h>
-#ifdef CONFIG_DM_ETH
 #include <dm.h>
-#endif
 
 #include "fm.h"
 #include <fsl_qe.h>		/* For struct qe_firmware */
@@ -551,7 +549,6 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 }
 #endif
 
-#ifdef CONFIG_DM_ETH
 struct fman_priv {
 	struct ccsr_fman *reg;
 	unsigned int fman_id;
@@ -626,4 +623,3 @@ U_BOOT_DRIVER(fman) = {
 	.priv_auto	= sizeof(struct fman_priv),
 	.flags = DM_FLAG_ALLOC_PRIV_DMA,
 };
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 3d9cc5c..ba858cc 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -57,7 +57,6 @@ struct fm_port_bd {
 #define TxBD_READY		0x8000
 #define TxBD_LAST		BD_LAST
 
-#ifdef CONFIG_DM_ETH
 enum fm_mac_type {
 #ifdef CONFIG_SYS_FMAN_V3
 	FM_MEMAC,
@@ -66,7 +65,6 @@ enum fm_mac_type {
 	FM_TGEC,
 #endif
 };
-#endif
 
 /* Fman ethernet private struct */
 /* Rx/Tx queue descriptor */
@@ -115,9 +113,7 @@ void fman_disable_port(enum fm_port port);
 void fman_enable_port(enum fm_port port);
 int fman_id(struct udevice *dev);
 void *fman_port(struct udevice *dev, int num);
-#ifdef CONFIG_DM_ETH
 void *fman_mdio(struct udevice *dev, enum fm_mac_type type, int num);
-#endif
 
 struct fsl_enet_mac {
 	void *base; /* MAC controller registers base address */
@@ -143,13 +139,9 @@ struct fm_eth {
 	struct mii_dev *bus;
 	struct phy_device *phydev;
 	int phyaddr;
-#ifndef CONFIG_DM_ETH
-	struct eth_device *dev;
-#else
 	enum fm_mac_type mac_type;
 	struct udevice *dev;
 	struct udevice *pcs_mdio;
-#endif
 	int max_rx_len;
 	struct fm_port_global_pram *rx_pram; /* Rx parameter table */
 	struct fm_port_global_pram *tx_pram; /* Tx parameter table */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
deleted file mode 100644
index 618c1bc..0000000
--- a/drivers/net/fm/init.c
+++ /dev/null
@@ -1,386 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011-2015 Freescale Semiconductor, Inc.
- */
-#include <errno.h>
-#include <common.h>
-#include <net.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#ifdef CONFIG_FSL_LAYERSCAPE
-#include <asm/arch/fsl_serdes.h>
-#include <linux/libfdt.h>
-#else
-#include <asm/fsl_serdes.h>
-#endif
-
-#include "fm.h"
-
-#ifndef CONFIG_DM_ETH
-struct fm_eth_info fm_info[] = {
-#if (CFG_SYS_NUM_FM1_DTSEC >= 1)
-	FM_DTSEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 2)
-	FM_DTSEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 3)
-	FM_DTSEC_INFO_INITIALIZER(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 4)
-	FM_DTSEC_INFO_INITIALIZER(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 5)
-	FM_DTSEC_INFO_INITIALIZER(1, 5),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 6)
-	FM_DTSEC_INFO_INITIALIZER(1, 6),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 7)
-	FM_DTSEC_INFO_INITIALIZER(1, 9),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 8)
-	FM_DTSEC_INFO_INITIALIZER(1, 10),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 1)
-	FM_DTSEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 2)
-	FM_DTSEC_INFO_INITIALIZER(2, 2),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 3)
-	FM_DTSEC_INFO_INITIALIZER(2, 3),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 4)
-	FM_DTSEC_INFO_INITIALIZER(2, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 5)
-	FM_DTSEC_INFO_INITIALIZER(2, 5),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 6)
-	FM_DTSEC_INFO_INITIALIZER(2, 6),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 7)
-	FM_DTSEC_INFO_INITIALIZER(2, 9),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 8)
-	FM_DTSEC_INFO_INITIALIZER(2, 10),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 1)
-	FM_TGEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 2)
-	FM_TGEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 3)
-	FM_TGEC_INFO_INITIALIZER2(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 4)
-	FM_TGEC_INFO_INITIALIZER2(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 1)
-	FM_TGEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 2)
-	FM_TGEC_INFO_INITIALIZER(2, 2),
-#endif
-};
-
-int fm_standard_init(struct bd_info *bis)
-{
-	int i;
-	struct ccsr_fman *reg;
-
-	reg = (void *)CFG_SYS_FSL_FM1_ADDR;
-	if (fm_init_common(0, reg))
-		return 0;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if ((fm_info[i].enabled) && (fm_info[i].index == 1))
-			fm_eth_initialize(reg, &fm_info[i]);
-	}
-
-#if (CFG_SYS_NUM_FMAN == 2)
-	reg = (void *)CFG_SYS_FSL_FM2_ADDR;
-	if (fm_init_common(1, reg))
-		return 0;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if ((fm_info[i].enabled) && (fm_info[i].index == 2))
-			fm_eth_initialize(reg, &fm_info[i]);
-	}
-#endif
-
-	return 1;
-}
-
-/* simple linear search to map from port to array index */
-static int fm_port_to_index(enum fm_port port)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if (fm_info[i].port == port)
-			return i;
-	}
-
-	return -1;
-}
-
-/*
- * Determine if an interface is actually active based on HW config
- * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NA if
- * the interface is not active based on HW cfg of the SoC
- */
-void fman_enet_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		phy_interface_t enet_if;
-
-		enet_if = fman_port_enet_if(fm_info[i].port);
-		if (enet_if != PHY_INTERFACE_MODE_NA) {
-			fm_info[i].enabled = 1;
-			fm_info[i].enet_if = enet_if;
-		} else {
-			fm_info[i].enabled = 0;
-		}
-	}
-
-	return;
-}
-
-void fm_disable_port(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].enabled = 0;
-#ifndef CONFIG_SYS_FMAN_V3
-	fman_disable_port(port);
-#endif
-}
-
-void fm_enable_port(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].enabled = 1;
-	fman_enable_port(port);
-}
-
-void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].bus = bus;
-}
-
-void fm_info_set_phy_address(enum fm_port port, int address)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].phy_addr = address;
-}
-
-/*
- * Returns the PHY address for a given Fman port
- *
- * The port must be set via a prior call to fm_info_set_phy_address().
- * A negative error code is returned if the port is invalid.
- */
-int fm_info_get_phy_address(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return -1;
-
-	return fm_info[i].phy_addr;
-}
-
-/*
- * Returns the type of the data interface between the given MAC and its PHY.
- * This is typically determined by the RCW.
- */
-phy_interface_t fm_info_get_enet_if(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return PHY_INTERFACE_MODE_NA;
-
-	if (fm_info[i].enabled)
-		return fm_info[i].enet_if;
-
-	return PHY_INTERFACE_MODE_NA;
-}
-
-static void
-__def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-{
-	return;
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-	 __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
-
-int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
-{
-	int off;
-	uint32_t ph;
-	phys_addr_t paddr = CFG_SYS_CCSRBAR_PHYS + info->compat_offset;
-#ifndef CONFIG_SYS_FMAN_V3
-	u64 dtsec1_addr = (u64)CFG_SYS_CCSRBAR_PHYS +
-				CFG_SYS_FSL_FM1_DTSEC1_OFFSET;
-#endif
-
-	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
-	if (off == -FDT_ERR_NOTFOUND)
-		return -EINVAL;
-
-	if (info->enabled) {
-		fdt_fixup_phy_connection(blob, off, info->enet_if);
-		board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
-		return 0;
-	}
-
-#ifdef CONFIG_SYS_FMAN_V3
-#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
-	/*
-	 * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
-	 * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
-	 * is disabled, ensure that the dual-role MAC is not disabled,
-	 * ditto for other dual-role MACs.
-	 */
-	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
-	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
-	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
-	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
-	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
-	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
-	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
-#if (CFG_SYS_NUM_FMAN == 2)
-										||
-	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
-	    ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))	||
-	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
-	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
-#endif
-#else
-	/* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
-	if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
-	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
-	    ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
-	    ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
-	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
-	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
-	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
-#endif
-	)
-		return 0;
-#endif
-	/* board code might have caused offset to change */
-	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
-
-#ifndef CONFIG_SYS_FMAN_V3
-	/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
-	if (paddr != dtsec1_addr)
-#endif
-		fdt_status_disabled(blob, off); /* disable the MAC node */
-
-	/* disable the fsl,dpa-ethernet node that points to the MAC */
-	ph = fdt_get_phandle(blob, off);
-	do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
-		"status", "disabled", strlen("disabled") + 1, 1);
-
-	return 0;
-}
-
-void fdt_fixup_fman_ethernet(void *blob)
-{
-	int i;
-
-#ifdef CONFIG_SYS_FMAN_V3
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++)
-		ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
-#else
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		/* Try the new compatible first.
-		 * If the node is missing, try the old.
-		 */
-		if (fm_info[i].type == FM_ETH_1G_E) {
-			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
-				ft_fixup_port(blob, &fm_info[i],
-					      "fsl,fman-1g-mac");
-		} else {
-			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
-			    ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
-				ft_fixup_port(blob, &fm_info[i],
-					      "fsl,fman-10g-mac");
-		}
-	}
-#endif
-}
-
-/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
- *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
- *then set the correct PHY address
- */
-void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
-		unsigned int port_num, int phy_base_addr)
-{
-	unsigned int regnum = 0;
-	int qsgmii;
-	int i;
-	int phy_real_addr;
-
-	qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
-
-	if (!qsgmii)
-		return;
-
-	for (i = base_port; i < base_port + port_num; i++) {
-		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
-			phy_real_addr = phy_base_addr + i - base_port;
-			fm_info_set_phy_address(i, phy_real_addr);
-		}
-	}
-}
-
-/*to check whether qsgmii riser card is used*/
-int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
-		unsigned int port_num, unsigned regnum)
-{
-	int i;
-	int val;
-
-	if (!bus)
-		return 0;
-
-	for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
-		val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
-		if (val != MIIM_TIMEOUT)
-			return 1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index 3ddae97..e0b62b9 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -22,11 +22,9 @@
 #define memac_setbits_32(a, v)	setbits_be32(a, v)
 #endif
 
-#ifdef CONFIG_DM_ETH
 struct fm_mdio_priv {
 	struct memac_mdio_controller *regs;
 };
-#endif
 
 #define MAX_NUM_RETRIES		1000
 
@@ -88,9 +86,6 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
 	u32 c45 = 1; /* Default to 10G interface */
 	int err;
 
-#ifndef CONFIG_DM_ETH
-	regs = bus->priv;
-#else
 	struct fm_mdio_priv *priv;
 
 	if (!bus->priv)
@@ -99,7 +94,6 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
 	regs = priv->regs;
 	debug("memac_mdio_write(regs %p, port %d, dev %d, reg %d, val %#x)\n",
 	      regs, port_addr, dev_addr, regnum, value);
-#endif
 
 	if (dev_addr == MDIO_DEVAD_NONE) {
 		c45 = 0; /* clause 22 */
@@ -147,22 +141,14 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
 	u32 c45 = 1;
 	int err;
 
-#ifndef CONFIG_DM_ETH
-	regs = bus->priv;
-#else
 	struct fm_mdio_priv *priv;
 
 	if (!bus->priv)
 		return -EINVAL;
 	priv = dev_get_priv(bus->priv);
 	regs = priv->regs;
-#endif
 
 	if (dev_addr == MDIO_DEVAD_NONE) {
-#ifndef CONFIG_DM_ETH
-		if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
-			return 0xffff;
-#endif
 		c45 = 0; /* clause 22 */
 		dev_addr = regnum & 0x1f;
 		memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
@@ -205,43 +191,6 @@ int memac_mdio_reset(struct mii_dev *bus)
 	return 0;
 }
 
-#ifndef CONFIG_DM_ETH
-int fm_memac_mdio_init(struct bd_info *bis, struct memac_mdio_info *info)
-{
-	struct mii_dev *bus = mdio_alloc();
-
-	if (!bus) {
-		printf("Failed to allocate FM TGEC MDIO bus\n");
-		return -1;
-	}
-
-	bus->read = memac_mdio_read;
-	bus->write = memac_mdio_write;
-	bus->reset = memac_mdio_reset;
-	strcpy(bus->name, info->name);
-
-	bus->priv = info->regs;
-
-	/*
-	 * On some platforms like B4860, default value of MDIO_CLK_DIV bits
-	 * in mdio_stat(mdio_cfg) register generates MDIO clock too high
-	 * (much higher than 2.5MHz), violating the IEEE specs.
-	 * On other platforms like T1040, default value of MDIO_CLK_DIV bits
-	 * is zero, so MDIO clock is disabled.
-	 * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to
-	 * be properly initialized.
-	 * NEG bit default should be '1' as per FMAN-v3 RM, but on platform
-	 * like T2080QDS, this bit default is '0', which leads to MDIO failure
-	 * on XAUI PHY, so set this bit definitely.
-	 */
-	memac_setbits_32(
-		&((struct memac_mdio_controller *)info->regs)->mdio_stat,
-		MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
-
-	return mdio_register(bus);
-}
-
-#else /* CONFIG_DM_ETH */
 #if defined(CONFIG_PHYLIB) && defined(CONFIG_DM_MDIO)
 static int fm_mdio_read(struct udevice *dev, int addr, int devad, int reg)
 {
@@ -341,4 +290,3 @@ U_BOOT_DRIVER(fman_mdio) = {
 	.plat_auto	= sizeof(struct mdio_perdev_priv),
 };
 #endif /* CONFIG_PHYLIB && CONFIG_DM_MDIO */
-#endif /* CONFIG_DM_ETH */